Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Ultrasound and Eco-Detergents for Sustainable Cleaning

  • Sarasua Miranda, Jon Ander
  • Ruiz Rubio, Leire
  • Trinidad Cristobal, Ander
  • Vilas Vilela, José Luis
  • Izaguirre Goyoaga, Jon Kepa
  • Barbero Mangas, Francisca
  • Aranzabe Basterrechea, Estíbaliz
Green chemistry faces a major challenge imposed by the Sustainable Development Goals (6, 14 and 15) defined in the 2030 Agenda. In the case of cleaning products (detergents), the challenges often become a paradox: even if it is biodegradable, no surfactant is harmless to aquatic life. Compared to other studies in the field, this paper covers ultrasound–detergent interactions beyond the cavitation removal process. It also considers synergistic effects with regard to the initial wetting phase and final rinsing. It concludes that the best detergent–ultrasound combination is that which minimises receding and critical sliding angles. At the same time, detergent concentration should be reduced so as to just to capture grease in micelles and avoid reattachment during rinsing. In combination with ultrasound, the concentration of eco-detergents can thus be reduced by up to 10% of their nominal value while attaining the same results., The projects leading to this research have received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreements No. 654479 WASCOP and No. 792103 SOLWARIS.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Energetic study of ultrasonic wettability enhancement

  • Sarasua Miranda, Jon Ander
  • Ruiz Rubio, Leire
  • Aranzabe Basterrechea, Estíbaliz
  • Vilas Vilela, José Luis
[EN]Many industrial and biological interfacial processes, such as welding and breathing depend directly on wettability and surface tension phenomena. The most common methods to control the wettability are based on modifying the properties of the fluid or the substrate. The present work focuses on the use of high-frequency acoustic waves (ultrasound) for the same purpose. It is well known that ultrasound can effectively clean a surface by acoustic cavitation, hence ultrasonic cleaning technology. Besides the cleaning process itself, many authors have observed an important wettability enhancement when liquids are exposed to low and high (ultrasonic) frequency vibration. Ultrasound goes one step further as it can instantly adjust the contact angle by tuning the vibration amplitude, but there is still a lack of comprehension about the physical principles that explain this phenomenon. To shed light on it, a thermodynamic model describing how ultrasound decreases the contact angle in a three-phase wetting system has been developed. Moreover, an analytical and experimental research has been carried out in order to demonstrate that ultrasound is an important competitor to surfactants in terms of energy efficiency and environmental friendliness., The projects leading to this research have received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N° 654479 WASCOP and N°792103 SOLWARIS.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Non-Immersion Ultrasonic Cleaning: An Efficient Green Process for Large Surfaces with Low Water Consumption

  • Sarasua Miranda, Jon Ander
  • Ruiz Rubio, Leire
  • Aranzabe Basterrechea, Estíbaliz
  • Vilas Vilela, José Luis
Ultrasonic cleaning is a developed and widespread technology used in the cleaning industry. The key to its success over other cleaning methods lies in its capacity to penetrate seemingly inaccessible, hard-to-reach corners, cleaning them successfully. However, its major drawback is the need to immerse the product into a tank, making it impossible to work with large or anchored elements. With the aim of revealing the scope of the technology, this paper will attempt to describe a more innovative approach to cleaning large area surfaces (walls, floors, façades, etc.) which involves applying ultrasonic cavitation onto a thin film of water, which is then deposited onto a dirty surface. Ultrasonic cleaning is an example of the proliferation of green technology, requiring 15 times less water and 115 times less power than conventional high-pressurized waterjet cleaning mechanisms. This paper will account for the physical phenomena that govern this new cleaning mechanism and the competition it poses towards more conventional pressurized waterjet technology. Being easy to use as a measure of success, specular surface cleaning has been selected to measure the degree of cleanliness (reflectance) as a function of the process’s parameters. A design of experiments has been developed in line with the main process parameters: amplitude, gap, and sweeping speed. Regression models have also been used to interpret the results for different degrees of soiling. The work concludes with the finding that the proposed new cleaning technology and process can reach up to 98% total cleanliness, without the use of any chemical product and with very low water and power consumption., This research was funded by European Union’s Horizon 2020 research and innovation programme under grant agreement Nº 654479 WASCOP and Nº 792103 SOLWARI
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Slot-Die Process of a Sol–Gel Photocatalytic Porous Coating for Large-Area Fabrication of Functional Architectural Glass

  • Angulo Ibáñez, Adrián
  • Aranzabe Basterrechea, Estíbaliz
  • Beobide Pacheco, Garikoitz
  • Castillo García, Oscar
  • Goitandia, Amaia M.
  • Pérez Yáñez, Sonia
  • Villamayor Dono, Antía
The slot-die process is an appealing technology for the fabrication of coatings on large-area substrates. However, its application on the production of photocatalytic coatings based on sol–gel formulations remains virtually unexplored. Thus, assessing the suitable formulation of the sol and operational parameters that allow one to yield high-efficacy photocatalyst coatings is a current challenge. This work aims to analyze the transferability of titania sol formulation optimized for dip-coating processes to slot-die technology. In this sense, firstly, the sol formulation is optimized by analyzing the influence of several types of surfactants on the microstructural features and photoactivity of TiO2 coatings’ growth on glass substrates. All formulations rendered a meaningful porosity and nanoscopic anatase crystallites (11–15 nm) with optical band gap values close to the expectation (3.25–3.31 eV). Accordingly, the performance of the photocatalytic dye degradation was closely related to the porosity and crystallite size led by each titania sol, and no meaningful differences were found between the results provided by the coatings developed by dip-coating and the slot-die method, which demonstrates the capability of the latter for its application on a large-scale fabrication of photocatalytic coatings., This research was funded by the Basque Government (IT1291-19), the Spanish Ministry of Science and Innovation (MICINN project: PID2019-108028GB-C21), and the European Union’s Horizon 2020 research and innovation program (grant agreement N° 792103 SOLWARIS).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The MONARCH high-resolution reanalysis of desert dust aerosol over Northern Africa, the Middle East and Europe (2007–2016)

  • di Tomaso, Enza
  • Escribano Alisio, Jeronimo
  • Basart Alpuente, Sara
  • Macchia, Francesca|||0000-0003-4952-5994
  • Benincasa, Francesco
  • Bretonnière, Pierre-Antoine|||0000-0002-3066-6685
  • Buñuel, Arnau
  • Castrillo Melguizo, Miguel
  • Gonçalves Ageitos, María|||0000-0003-3857-6403
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • Klose, Martina|||0000-0001-8190-3700
  • Montané Pinto, Gilbert
  • Obiso, Vincenzo
  • Olid García, Miriam
  • Pérez García-Pando, Carlos|||0000-0002-4456-0697
One of the challenges in studying desert dust aerosol along with its numerous interactions and impacts is the paucity of direct in situ measurements, particularly in the areas most affected by dust storms. Satellites typically provide column-integrated aerosol measurements, but observationally constrained continuous 3D dust fields are needed to assess dust variability, climate effects and impacts upon a variety of socio-economic sectors. Here, we present a high-resolution regional reanalysis data set of desert dust aerosols that covers Northern Africa, the Middle East and Europe along with the Mediterranean Sea and parts of central Asia and the Atlantic and Indian oceans between 2007 and 2016. The horizontal resolution is 0.1◦ latitude × 0.1◦ longitude in a rotated grid, and the temporal resolution is 3 h. The reanalysis was produced using local ensemble transform Kalman filter (LETKF) data assimilation in the Multiscale Online Nonhydrostatic AtmospheRe CHemistry model (MONARCH) developed at the Barcelona Supercomputing Center (BSC). The assimilated data are coarse-mode dust optical depth retrieved from the Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue Level 2 products. The reanalysis data set consists of upper-air variables (dust mass concentrations and the extinction coefficient), surface variables (dust deposition and solar irradiance fields among them) and total column variables (e.g. dust optical depth and load). Some dust variables, such as concentrations and wet and dry deposition, are expressed for a binned size distribution that ranges from 0.2 to 20 µm in particle diameter. Both analysis and first-guess (analysis-initialized simulation) fields are available for the variables that are diagnosed from the state vector. A set of ensemble statistics is archived for each output variable, namely the ensemble mean, standard deviation, maximum and median. The spatial and temporal distribution of the dust fields follows well-known dust cycle features controlled by seasonal changes in meteorology and vegetation cover. The analysis is statistically closer to the assimilated retrievals than the first guess, which proves the consistency of the data assimilation method. Independent evaluation using Aerosol Robotic Network (AERONET) dust-filtered optical depth retrievals indicates that the reanalysis data set is highly accurate (mean bias = −0.05, RMSE = 0.12 and r = 0.81 when compared to retrievals from the spectral de-convolution algorithm on a 3-hourly basis). Verification statistics are broadly homogeneous in space and time with regional differences that can be partly attributed to model limitations (e.g. poor representation of small-scale emission processes), the presence of aerosols other than dust in the observations used in the evaluation and differences in the number of observations among seasons. Such a reliable high-resolution historical record of atmospheric desert dust will allow a better quantification of dust impacts upon key sectors of society and economy, including health, solar energy production and transportation. The reanalysis data set (Di Tomaso et al., 2021) is distributed via Thematic Real-time Environmental Distributed Data Services (THREDDS) at BSC and is freely available at http://hdl.handle.net/21.12146/c6d4a608-5de3-47f6-a004-67cb1d498d98 (last access: 10 June 2022)., This research has been supported by the DustClim project, which is part of ERA4CS, an ERA-NET programme co-funded by the European Union’s Horizon 2020 research and innovation programme (grant no. 690462); the European Research Council (FRAGMENT (grant no. 773051)); grant no. RYC-2015- 18690 funded by MCIN/AEI/10.13039/501100011033 and ESF Investing in your future; grant no. CGL2017-88911-R funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe; the AXA Research Fund (AXA Chair on Sand and Dust Storms); the European Commission, Horizon 2020 Framework Programme (grant no. 792103 (SOLWARIS)); and ATMO-ACCESS (Access to Atmospheric Research Facilities) funded in the frame of the programme H2020-EU.1.4.1.2 (grant no. 101008004, 1 April 2021–31 March 2025). Jerónimo Escribano and Martina Klose have received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreements H2020-MSCACOFUND-2016-754433 and H2020-MSCA-IF-2017-789630, respectively. Martina Klose received further support through the Helmholtz Association’s Initiative and Networking Fund (grant no. VH-NG-1533). This work has been partially funded by the contribution agreement between AEMET and BSC to carry out development and improvement activities of the products and services supplied by the World Meteorological Organization (WMO) Barcelona Dust Regional Center (i.e. the WMO Sand and Dust Storm Warning Advisory and Assessment System (SDS-WAS) Regional Center for Northern Africa, the Middle East and Europe)., Peer Reviewed, Article signat per 24 autors/es: Enza Di Tomaso (1) , Jerónimo Escribano (1) , Sara Basart (1) , Paul Ginoux (2) , Francesca Macchia (1) , Francesca Barnaba (3) , Francesco Benincasa (1), Pierre-Antoine Bretonnière (1), Arnau Buñuel (1), Miguel Castrillo (1), Emilio Cuevas (4) , Paola Formenti (5) , María Gonçalves (1,6), Oriol Jorba (1), Martina Klose (1,7), Lucia Mona (8), Gilbert Montané Pinto (1) , Michail Mytilinaios (8), Vincenzo Obiso (1,a), Miriam Olid (1), Nick Schutgens (9) , Athanasios Votsis (10,11), Ernest Werner (12), and Carlos Pérez García-Pando (1,13) // (1) Barcelona Supercomputing Center (BSC), Barcelona, Spain; (2) NOAA Geophysical Fluid Dynamics Laboratory, Princeton, New Jersey, USA; (3) Consiglio Nazionale delle Ricerche–Istituto di Scienze dell’Atmosfera e del Clima (CNR–ISAC), Rome, Italy; (4) Izaña Atmospheric Research Center (IARC), Agencia Estatal de Meteorología (AEMET), Santa Cruz de Tenerife, Spain; (5) Université Paris Cité and Univ Paris-Est Créteil, CNRS, LISA, 75013 Paris, France; (6) Department of Project and Construction Engineering, Universitat Politècnica de Catalunya – BarcelonaTech (UPC), Terrassa, Spain; (7) Department Troposphere Research, Institute of Meteorology and Climate Research (IMK-TRO), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany; (8) Consiglio Nazionale delle Ricerche–Istituto di Metodologie per l’Analisi Ambientale (CNR–IMAA), Tito Scalo (PZ), Italy; (9) Department of Earth Sciences, Vrije Universiteit Amsterdam, 1081 HV Amsterdam, the Netherlands; (10) Section of Governance and Technology for Sustainability (BMS-CSTM), University of Twente, Enschede, the Netherlands; (11) Weather and Climate Change Impact Research, Finnish Meteorological Institute (FMI), Helsinki, Finland; (12) Agencia Estatal de Meteorología (AEMET), Barcelona, Spain; (13) ICREA, Catalan Institution for Research and Advanced Studies, Barcelona, Spain anow at: NASA Goddard Institute for Space Studies (GISS), New York, New York, USA, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.3 - Millorar l’educació, la conscienciació i la capacitat humana i institucional en relació amb la mitigació del canvi climàtic, l’adaptació a aquest, la reducció dels efectes i l’alerta primerenca, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The MONARCH high-resolution reanalysis of desert dust aerosol over Northern Africa, the Middle East and Europe (2007–2016)

  • di Tomaso, Enza
  • Escribano Alisio, Jeronimo
  • Basart Alpuente, Sara
  • Macchia, Francesca
  • Benincasa, Francesco
  • Bretonnière, Pierre-Antoine
  • Buñuel, Arnau
  • Castrillo Melguizo, Miguel
  • Gonçalves Ageitos, María
  • Jorba Casellas, Oriol
  • Klose, Martina
  • Montané Pinto, Gilbert
  • Obiso, Vincenzo
  • Olid García, Miriam
  • Pérez García-Pando, Carlos
One of the challenges in studying desert dust aerosol along with its numerous interactions and impacts is the paucity of direct in situ measurements, particularly in the areas most affected by dust storms. Satellites typically provide column-integrated aerosol measurements, but observationally constrained continuous 3D dust fields are needed to assess dust variability, climate effects and impacts upon a variety of socio-economic sectors. Here, we present a high-resolution regional reanalysis data set of desert dust aerosols that covers Northern Africa, the Middle East and Europe along with the Mediterranean Sea and parts of central Asia and the Atlantic and Indian oceans between 2007 and 2016. The horizontal resolution is 0.1◦ latitude × 0.1◦ longitude in a rotated grid, and the temporal resolution is 3 h. The reanalysis was produced using local ensemble transform Kalman filter (LETKF) data assimilation in the Multiscale Online Nonhydrostatic AtmospheRe CHemistry model (MONARCH) developed at the Barcelona Supercomputing Center (BSC). The assimilated data are coarse-mode dust optical depth retrieved from the Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue Level 2 products. The reanalysis data set consists of upper-air variables (dust mass concentrations and the extinction coefficient), surface variables (dust deposition and solar irradiance fields among them) and total column variables (e.g. dust optical depth and load). Some dust variables, such as concentrations and wet and dry deposition, are expressed for a binned size distribution that ranges from 0.2 to 20 µm in particle diameter. Both analysis and first-guess (analysis-initialized simulation) fields are available for the variables that are diagnosed from the state vector. A set of ensemble statistics is archived for each output variable, namely the ensemble mean, standard deviation, maximum and median. The spatial and temporal distribution of the dust fields follows well-known dust cycle features controlled by seasonal changes in meteorology and vegetation cover. The analysis is statistically closer to the assimilated retrievals than the first guess, which proves the consistency of the data assimilation method. Independent evaluation using Aerosol Robotic Network (AERONET) dust-filtered optical depth retrievals indicates that the reanalysis data set is highly accurate (mean bias = −0.05, RMSE = 0.12 and r = 0.81 when compared to retrievals from the spectral de-convolution algorithm on a 3-hourly basis). Verification statistics are broadly homogeneous in space and time with regional differences that can be partly attributed to model limitations (e.g. poor representation of small-scale emission processes), the presence of aerosols other than dust in the observations used in the evaluation and differences in the number of observations among seasons. Such a reliable high-resolution historical record of atmospheric desert dust will allow a better quantification of dust impacts upon key sectors of society and economy, including health, solar energy production and transportation. The reanalysis data set (Di Tomaso et al., 2021) is distributed via Thematic Real-time Environmental Distributed Data Services (THREDDS) at BSC and is freely available at http://hdl.handle.net/21.12146/c6d4a608-5de3-47f6-a004-67cb1d498d98 (last access: 10 June 2022)., This research has been supported by the DustClim project, which is part of ERA4CS, an ERA-NET programme co-funded by the European Union’s Horizon 2020 research and innovation programme (grant no. 690462); the European Research Council (FRAGMENT (grant no. 773051)); grant no. RYC-2015- 18690 funded by MCIN/AEI/10.13039/501100011033 and ESF Investing in your future; grant no. CGL2017-88911-R funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe; the AXA Research Fund (AXA Chair on Sand and Dust Storms); the European Commission, Horizon 2020 Framework Programme (grant no. 792103 (SOLWARIS)); and ATMO-ACCESS (Access to Atmospheric Research Facilities) funded in the frame of the programme H2020-EU.1.4.1.2 (grant no. 101008004, 1 April 2021–31 March 2025). Jerónimo Escribano and Martina Klose have received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreements H2020-MSCACOFUND-2016-754433 and H2020-MSCA-IF-2017-789630, respectively. Martina Klose received further support through the Helmholtz Association’s Initiative and Networking Fund (grant no. VH-NG-1533). This work has been partially funded by the contribution agreement between AEMET and BSC to carry out development and improvement activities of the products and services supplied by the World Meteorological Organization (WMO) Barcelona Dust Regional Center (i.e. the WMO Sand and Dust Storm Warning Advisory and Assessment System (SDS-WAS) Regional Center for Northern Africa, the Middle East and Europe)., Peer Reviewed, Article signat per 24 autors/es: Enza Di Tomaso (1) , Jerónimo Escribano (1) , Sara Basart (1) , Paul Ginoux (2) , Francesca Macchia (1) , Francesca Barnaba (3) , Francesco Benincasa (1), Pierre-Antoine Bretonnière (1), Arnau Buñuel (1), Miguel Castrillo (1), Emilio Cuevas (4) , Paola Formenti (5) , María Gonçalves (1,6), Oriol Jorba (1), Martina Klose (1,7), Lucia Mona (8), Gilbert Montané Pinto (1) , Michail Mytilinaios (8), Vincenzo Obiso (1,a), Miriam Olid (1), Nick Schutgens (9) , Athanasios Votsis (10,11), Ernest Werner (12), and Carlos Pérez García-Pando (1,13) // (1) Barcelona Supercomputing Center (BSC), Barcelona, Spain; (2) NOAA Geophysical Fluid Dynamics Laboratory, Princeton, New Jersey, USA; (3) Consiglio Nazionale delle Ricerche–Istituto di Scienze dell’Atmosfera e del Clima (CNR–ISAC), Rome, Italy; (4) Izaña Atmospheric Research Center (IARC), Agencia Estatal de Meteorología (AEMET), Santa Cruz de Tenerife, Spain; (5) Université Paris Cité and Univ Paris-Est Créteil, CNRS, LISA, 75013 Paris, France; (6) Department of Project and Construction Engineering, Universitat Politècnica de Catalunya – BarcelonaTech (UPC), Terrassa, Spain; (7) Department Troposphere Research, Institute of Meteorology and Climate Research (IMK-TRO), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany; (8) Consiglio Nazionale delle Ricerche–Istituto di Metodologie per l’Analisi Ambientale (CNR–IMAA), Tito Scalo (PZ), Italy; (9) Department of Earth Sciences, Vrije Universiteit Amsterdam, 1081 HV Amsterdam, the Netherlands; (10) Section of Governance and Technology for Sustainability (BMS-CSTM), University of Twente, Enschede, the Netherlands; (11) Weather and Climate Change Impact Research, Finnish Meteorological Institute (FMI), Helsinki, Finland; (12) Agencia Estatal de Meteorología (AEMET), Barcelona, Spain; (13) ICREA, Catalan Institution for Research and Advanced Studies, Barcelona, Spain anow at: NASA Goddard Institute for Space Studies (GISS), New York, New York, USA, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.3 - Millorar l’educació, la conscienciació i la capacitat humana i institucional en relació amb la mitigació del canvi climàtic, l’adaptació a aquest, la reducció dels efectes i l’alerta primerenca, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (published version)