Pasar al contenido principal

TELEDETECCION LIDAR ATMOSFERICA Y OBSERVACIONES COOPERATIVAS: EXPLOTACION, PROCESADO DE LA SEÑAL Y BALANCE RADIATIVO.

TEC2015-63832-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 53
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatiotemporal evolution of a severe winter dust event in the western Mediterranean: Aerosol optical and physical properties

  • Titos, Gloria
  • Ealo, Marina
  • Pandolfi, Marco
  • Pérez, Noemí
  • Sola, Yolanda
  • Sicard, M.
  • Comerón, Adolfo
  • Querol, Xavier
  • Alastuey, Andrés
An outstanding Saharan dust event affected the Iberian Peninsula during winter 2016 (20 to 25 February). The impact of this event on ambient PM10 surface levels and its spatial and temporal evolution was investigated by means of data from 250 air quality stations across mainland Spain and the Balearic Islands. The event had a significant impact on surface PM10 levels, and on 22 February, 90% of the air quality monitoring sites registered PM10 concentrations above the EU daily limit value of 50 µg/m3. The study of the attenuated backscattering vertical profiles associated with African dust evidenced a complex structure, with a thick aerosol layer that was at higher altitudes over the pre-Pyrenees compared to the coastal area of Barcelona but closer to the surface than typically observed at both sites. Optical and physical properties of dust particles were investigated at the continental background Global Atmosphere Watch mountain observatory of Montsec (MSA) in the pre-Pyrenees. Good agreement was found between in situ and passive remote sensing methodologies once the aloft dust layer reached the MSA station. Scattering Ångström exponent values decreased to values close to zero (even below zero for surface in situ measurements) indicating the predominance of coarse particles. On the contrary, absorption Ångström exponent values increased during the Saharan dust outbreak denoting an absorption enhancement at shorter wavelengths, characteristic of mineral dust particles. Furthermore, the performance of NMMB/BSC-Dust and BSC-DREAM8b models has been qualitatively evaluated for the dust spatial distribution across Spain and the vertical structure over MSA and Barcelona showing good agreement. © 2017. The Authors., This work was supported by the MINECO (Spanish Ministry of Economy and Competitiveness, and FEDER funds, under the PRISMA project (CGL2012- 39623-C02/00) and project TEC2015- 63832-P), the MAGRAMA (Spanish Ministry of Agriculture, Food and Environment), the Generalitat de Catalunya (AGAUR 2014 SGR33, and the Departament de Territori I Sostenibilitat). This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement 654109 (ACTRIS-2). M. Pandolfi is funded by a Ramón y Cajal Fellowship (RYC-2013-14036) awarded by the Spanish Ministry of Economy and Competitiveness. G. Titos is funded by the Spanish Ministry of Economy and Competitiveness under postdoctoral programme Juan de la Cierva-formación (FJCI-2014-20819). We thank Alberto Cazorla for in-depth discussion about the ceilometer data processing. Ana Calvo is thankfully acknowledged for helpful discussion on the optical spec trometer and providing the diameters correction. Th...View More, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Compact lidar system using laser diode, binary continuous wave power modulation, and an avalanche photodiode-based receiver controlled by a digital signal processor

  • Ardanuy Dellà, Antoni
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
We analyze the practical limits of a lidar system based on the use of a laser diode, random binary continuous wave power modulation, and an avalanche photodiode (APD)-based photereceiver, combined with the control and computing power of the digital signal processors (DSP) currently available. The target is to design a compact portable lidar system made all in semiconductor technology, with a low-power demand and an easy configuration of the system, allowing change in some of its features through software. Unlike many prior works, we emphasize the use of APDs instead of photomultiplier tubes to detect the return signal and the application of the system to measure not only hard targets, but also medium-range aerosols and clouds. We have developed an experimental prototype to evaluate the behavior of the system under different environmental conditions. Experimental results provided by the prototype are presented and discussed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The unprecedented 2017-2018 stratospheric smoke event: decay phase and aerosol properties observed with the EARLINET

  • Baars, Holger
  • Ansmann, Albert
  • Ohneiser, Kevin
  • Sicard, Michaël|||0000-0001-8287-9693
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
Six months of stratospheric aerosol observations with the European Aerosol Research Lidar Network (EARLINET) from August 2017 to January 2018 are presented. The decay phase of an unprecedented, record-breaking stratospheric perturbation caused by wildfire smoke is reported and discussed in terms of geometrical, optical, and microphysical aerosol properties. Enormous amounts of smoke were injected into the upper troposphere and lower stratosphere over fire areas in western Canada on 12 August 2017 during strong thunderstorm–pyrocumulonimbus activity. The stratospheric fire plumes spread over the entire Northern Hemisphere in the following weeks and months. Twenty-eight European lidar stations from northern Norway to southern Portugal and the eastern Mediterranean monitored the strong stratospheric perturbation on a continental scale. The main smoke layer (over central, western, southern, and eastern Europe) was found at heights between 15 and 20¿km since September 2017 (about 2 weeks after entering the stratosphere). Thin layers of smoke were detected at heights of up to 22–23¿km. The stratospheric aerosol optical thickness at 532¿nm decreased from values >¿0.25 on 21–23 August 2017 to 0.005–0.03 until 5–10 September and was mainly 0.003–0.004 from October to December 2017 and thus was still significantly above the stratospheric background (0.001–0.002). Stratospheric particle extinction coefficients (532¿nm) were as high as 50–200¿Mm-1 until the beginning of September and on the order of 1¿Mm-1 (0.5–5¿Mm-1) from October 2017 until the end of January 2018. The corresponding layer mean particle mass concentration was on the order of 0.05–0.5¿µg¿m-3 over these months. Soot particles (light-absorbing carbonaceous particles) are efficient ice-nucleating particles (INPs) at upper tropospheric (cirrus) temperatures and available to influence cirrus formation when entering the tropopause from above. We estimated INP concentrations of 50–500¿L-1 until the first days in September and afterwards 5–50¿L-1 until the end of the year 2017 in the lower stratosphere for typical cirrus formation temperatures of -55¿°C and an ice supersaturation level of 1.15. The measured profiles of the particle linear depolarization ratio indicated a predominance of nonspherical smoke particles. The 532¿nm depolarization ratio decreased slowly with time in the main smoke layer from values of 0.15–0.25 (August–September) to values of 0.05–0.10 (October–November) and <¿0.05 (December–January). The decrease of the depolarization ratio is consistent with aging of the smoke particles, growing of a coating around the solid black carbon core (aggregates), and thus change of the shape towards a spherical form. We found ascending aerosol layer features over the most southern European stations, especially over the eastern Mediterranean at 32–35°¿N, that ascended from heights of about 18–19 to 22–23¿km from the beginning of October to the beginning of December 2017 (about 2¿km per month). We discuss several transport and lifting mechanisms that may have had an impact on the found aerosol layering structures., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Planetary boundary layer height variability over Athens, Greece, based on the synergy of Raman lidar and radiosonde data: application of the Kalman filter and other techniques (2011-2016)

  • Alexiou, Dimitrios
  • Kokkalis, Panagiotis
  • Papayannis, Alexandros
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Argyrouli, Athina
  • Tsaknakis, Georgios
  • Tzanis, Chris G.
The temporal evolution of the Planetary Boundary Layer height over Athens, Greece for a 5-year period (2011-2016) is presented. Using the EOLE Raman lidar system, the range-corrected lidar signals were selected around 12:00 UTC and 00:00 UTC for a total of 332 cases (165 days and 167 nights). The Kalman filter and other techniques were used to determine PBL height. The mean PBL height was found to be around 1617±324 m (12:00 UTC) and 892±130 m (00:00 UTC)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Progress toward characterization of the atmospheric boundary layer over northern Alabama using observations by a vertically pointing, S-band profiling radar during VORTEX-Southeast

  • Tanamachi, Robin
  • Frasier, Steve
  • Waldinger, Joseph
  • LaFleur, Allison T.
  • Turner, David Dave
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
During spring 2016 and spring 2017, a vertically pointing, S-band FMCW radar (UMass FMCW) was deployed in northern Alabama under the auspices of the Verification of the Origins of Rotation in Tornadoes Experiment (VORTEX) – Southeast. In total, ~14 weeks’ worth of data were collected, in conditions ranging from quiescent clear skies to severe thunderstorms. The principal objective of these deployments was to characterize the boundary layer evolution near the VORTEX-Southeast domain. In this paper, we describe intermediate results in service of this objective. Specifically, we describe updates to the UMass FMCW system, document its deployments for VORTEX-Southeast, and apply three automated algorithms: (1) an dealiasing algorithm to the Doppler velocities, (2) a fuzzy logic scatterer classification scheme to separate precipitation from non-precipitation observations, (3) a bright band / melting layer identification algorithm for stratiform precipitation, and (4) an extended Kalman filter-based convective boundary layer depth (mixing height) measurement algorithm for non-precipitation observations. Results from the latter two applications are qualitatively verified against retrieved soundings from a collocated thermodynamic profiling system., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A 1-D radiative transfer study of mineral dust during CHARMEX/ADRIMED 2013 campaign

  • Granados Muñoz, María José
  • Sicard, Michaël|||0000-0001-8287-9693
  • Román Díez, Roberto
  • Benavent Oltra, Pablo
  • Barragán Cuesta, Rubén
  • Brogniez, G.
  • Denjean, Cyrielle
  • Alados-Arboledas, L
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
A 1-D radiative transfer study is presented based on the measurements performed at Granada during a dust event within the framework of the ChArMEx/ADRIMED (Chemistry-Aerosol Mediterranean Experiment/Aerosol Direct Radiative Forcing on the Mediterranean Climate) campaign, during June 16-17, 2013. Ground-based AERONET and lidar measurements were performed and further processed with the GRASP algorithm to get spectrally-resolved profiles of extinction and single scattering albedo. Furthermore, the research aircraft ATR-42 made two flights above Granada providing vertical profiles of aerosol optical and microphysical properties together with measurements of broadband radiative fluxes. All of the ground-based and aircraft aerosol properties are used as input in the radiative transfer model GAME in order to evaluate its sensitivity to different input datasets. The aircraft fluxes are used for validation of the modelled ones., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Two-dimensional mineral dust radiative effect calculations from CALIPSO observations over Europe

  • Granados Muñoz, María José
  • Sicard, Michaël|||0000-0001-8287-9693
  • Papagiannopoulos, Nikolaos
  • Barragán Cuesta, Rubén
  • Bravo Aranda, Juan Antonio
  • Nicolae, D.
A demonstration study to examine the feasibility of retrieving dust radiative effects based on combined satellite data from MODIS (Moderate Resolution Imaging Spectroradiometer), CERES (Clouds and the Earth's Radiant Energy System) and CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) lidar vertical profiles along their orbit is presented. The GAME (Global Atmospheric Model) radiative transfer model is used to estimate the shortwave and longwave dust radiative effects below the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite) orbit assuming an aerosol parameterization based on the CALIOP vertical distribution at a horizontal resolution of 5¿km and additional AERONET (Aerosol Robotic Network) data. Two study cases are analyzed: a strong long-range transport mineral dust event (aerosol optical depth, AOD, of 0.52) that originated in the Sahara Desert and reached the United Kingdom and a weaker event (AOD¿=¿0.16) that affected eastern Europe. The radiative fluxes obtained are first validated in terms of radiative efficiency at a single point with space–time colocated lidar ground-based measurements from EARLINET (European Aerosol Research Lidar Network) stations below the orbit. The methodology is then applied to the full orbit. The strong dependence of the radiative effects on the aerosol load (and to a lesser extent on the surface albedo) highlights the need for accurate AOD measurements for radiative studies. The calculated dust radiative effects and heating rates below the orbits are in good agreement with previous studies of mineral dust, with the radiative efficiency obtained at the surface ranging between -80.3 and -63.0¿W¿m-2 for lower dust concentration event and -119.1 and -79.3¿W¿m-2 for the strong event. Thus, results demonstrate the validity of the method presented here to retrieve 2-D accurate radiative properties with large spatial and temporal coverage., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Modelling of pollen dispersion in the atmosphere: evaluation with a continuous 1ß+1d lidar

  • Sicard, Michaël|||0000-0001-8287-9693
  • Izquierdo, Rebeca
  • Jorba i Casellas, Oriol
  • Alarcón Jordán, Marta|||0000-0002-0938-6873
  • Belmonte Soler, Jordina
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • De Linares, Concepción
  • Baldasano Recio, José María|||0000-0002-6191-635X
Pollen allergenicity plays an important role on human health and wellness. It is thus of large public interest to increase our knowledge of pollen grain behavior in the atmosphere (source, emission, processes involved during their transport, etc.) at fine temporal and spatial scales. First simulations with the Barcelona Supercomputing Center NMMB/BSC-CTM model of Platanus and Pinus dispersion in the atmosphere were performed during a 5-day pollination event observed in Barcelona, Spain, between 27 – 31 March, 2015. The simulations are compared to vertical profiles measured with the continuous Barcelona Micro Pulse Lidar system. First results show that the vertical distribution is well reproduced by the model in shape, but not in intensity, the model largely underestimating in the afternoon. Guidelines are proposed to improve the dispersion of airborne pollen by numerical prediction models., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Current research in lidar technology used for the remote sensing of atmospheric aerosols

  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Sicard, Michaël|||0000-0001-8287-9693
Lidars are active optical remote sensing instruments with unique capabilities for atmospheric sounding. A manifold of atmospheric variables can be profiled using different types of lidar: concentration of species, wind speed, temperature, etc. Among them, measurement of the properties of aerosol particles, whose influence in many atmospheric processes is important but is still poorly stated, stands as one of the main fields of application of current lidar systems. This paper presents a review on fundamentals, technology, methodologies and state-of-the art of the lidar systems used to obtain aerosol information. Retrieval of structural (aerosol layers profiling), optical (backscatter and extinction coefficients) and microphysical (size, shape and type) properties requires however different levels of instrumental complexity; this general outlook is structured following a classification that attends these criteria. Thus, elastic systems (detection only of emitted frequencies), Raman systems (detection also of Raman frequency-shifted spectral lines), high spectral resolution lidars, systems with depolarization measurement capabilities and multi-wavelength instruments are described, and the fundamentals in which the retrieval of aerosol parameters is based is in each case detailed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An example from the Basic Engineering Project subject at the UPC Telecom-BCN School: learning radiofrequency links, antennas and amplifiers with the help of recycled materials

  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Synergy of Raman lidar and modeled temperature for relative humidity profiling: assessment and uncertainty analysis

  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Sicard, Michaël|||0000-0001-8287-9693
  • Granados Muñoz, María José
  • Barragán Cuesta, Rubén
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • García Vizcaíno, David|||0000-0002-2947-925X
Relative humidity (RH) profiling using Raman lidars requires simultaneous range-resolved temperature and pressure data that are not always available. We propose and assess a method based on the use of a locally retrieved atmospheric model to estimate the temperature and pressure profiles. This model relies on the data from daily radiosonde launches at Barcelona during a five-year-long period (2015-2019). We have computed the range-resolved error of the model compared with the radiosonde ``true'' temperature profiles. Then, we have calculated the induced uncertainty in the recalculated RH profiles, finding that the standard deviation at 5 km is <15% for more than 80% of the radiosoundings. We have applied the method to a set of lidar measurements. We have first compared the resulting profiles with lidar retrievals using radiosonde temperatures, and we found differences that are compatible with the previous statistical analysis. We also compared them with in situ radiosonde humidity measurements, finding, in this case, bigger differences due to additional sources of error. Uncertainty analysis shows that the temperature model is the most significant error source below 4-5 km. For higher altitudes, the noise of the Raman signals may become the main contribution. We show that the resulting uncertainty (commonly <15% below 5 km) is compatible with the statistical analysis of the model and comparable with the ones obtained using other instruments for temperature profiling. We show that this method permits nocturnal lidar-based RH profiling with uncertainty estimation without the need for measured atmospheric profiles., This work was supported by the European Union H2020 program (grant agreement no. 654109, 778349), the Spanish Ministry of Economy and Competitivity (ref. TEC2015- 63832-P), the Spanish Ministry of Science and Innovation (ref. PID2019- 103886RB-I00, CGL2017-90884-REDT), the Department of Economy and Knowledge of the Catalan autonomous government (grant 2014 SGR583), the Unity of Excellence Maria de Maeztu (ref. MDM-2016-0600), which is financed by the Agencia Estatal de Investigación (AEI) and the Juan de la Cierva-Formación Program (grant FJCI-2015-23904)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impact of mineral dust on shortwave and longwave radiation: evaluation of different vertically resolved parameterizations in 1-D radiative transfer computations

  • Granados Muñoz, María José
  • Sicard, Michaël|||0000-0001-8287-9693
  • Román Díez, Roberto
  • Benavent Oltra, Pablo
  • Barragán Cuesta, Rubén
  • Brogniez, G.
  • Denjean, Cyrielle
  • Mallet, Marc
  • Formenti, P
  • Torres, Banjamin
  • Alados Arboledas, Lucas
Aerosol radiative properties are investigated in southeastern Spain during a dust event on June 16-17, 2013 in the framework of the ChArMEx/ADRIMED (Chemistry-Aerosol Mediterranean Experiment /Aerosol Direct Radiative Impact on the regional climate in the MEDiterranean region) campaign. Particle optical and microphysical properties from ground-based sun/sky photometer and lidar measurements, as well as in situ measurements onboard the SAFIRE ATR 42 French research aircraft are used to create a set of different levels of input parameterizations, which feed the 1-D radiative transfer model (RTM) GAME (Global Atmospheric ModEl). We consider three datasets: 1) a first parameterization based on the retrievals by an advanced aerosol inversion code (GRASP; Generalized Retrieval of Aerosol and Surface Properties) applied to combined photometer and lidar data; 2) a parameterization based on the photometer columnar optical properties and vertically-resolved lidar retrievals with the two-component Klett-Fernald algorithm; and 3) a parameterization based on vertically-resolved optical and microphysical aerosol properties measured in situ by the aircraft instrumentation. Once retrieved, the outputs of the RTM in terms of both shortwave and longwave radiative fluxes are compared against ground and in situ airborne measurements. In addition, the outputs of the model in terms of the aerosol direct radiative effect are discussed with respect to the different input parameterizations. Results show that calculated atmospheric radiative fluxes differ no more than 7 % to the measured ones. The three parameterization datasets produce a cooling effect due to mineral dust both at the surface and the top of the atmosphere. Aerosol radiative effects with differences up to 10 W·m-2 in the shortwave spectral range (mostly due to differences in the aerosol optical depth), and 2 W·m-2 for the longwave (mainly due to differences in the aerosol optical depth but also to the coarse mode radius used to calculate the radiative properties) are obtained when comparing the three parameterizations. The study reveals the complexity of parametrizing 1-D RTMs as sizing and characterising the optical properties of mineral dust is challenging. The use of advanced remote sensing data and processing, in combination with closure studies on the optical/microphysical properties from in situ aircraft measurements when available, is recommended., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Performance evaluation of a floating lidar buoy in nearshore conditions

  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Tiana Alsina, Jordi|||0000-0001-8359-9378
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This work provides a signal-processing and statistical-error analysis methodology to assess key performance indicators for a floating Doppler wind lidar. The study introduces the raw-to-clean data processing chain, error assessment indicators and key performance indicators, as well as two filtering methods at post-processing level to alleviate the impact of angular motion and spatial variability of the wind flow on the performance indicators. Towards this aim, the study mainly revisits horizontal wind speed (HWS) and turbulence intensity measurements with a floating ZephIR 300 lidar buoy during a 38 day nearshore test campaign in Pont del Petroli (Barcelona). Typical day cases along with overall statistics for the whole campaign are discussed to illustrate the methodology and processing tools developed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Extreme, wintertime Saharan dust intrusion in the Iberian Peninsula: lidar monitoring and evaluation of dust forecast models during the February 2017 event

  • Fernández García, Alfonso Javier
  • Sicard, Michaël|||0000-0001-8287-9693
  • Costa, Maria João
  • Guerrero Rascado, Juan Luis
  • Gomez Amo, J.L.
  • Molero, Francisco
  • Barragán Cuesta, Rubén
  • Basart, Sara|||0000-0002-9821-8504
  • Bortoli, D.
  • Bedoya Velásquez, Andrés Esteban
  • Granados Muñoz, María José
  • Martínez Lozano, José Antonio
  • Artiñano, Begoña
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Román Díez, Roberto
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Benavent Oltra, José Antonio
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Alados Arboledas, Lucas
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Pujadas Cordero, Manuel
An unprecedented extreme Saharan dust event was registered in winter time from 20 to 23 February 2017 over the Iberian Peninsula (IP). We report on aerosol optical properties observed under this extreme dust intrusion through passive and active remote sensing techniques. For that, AERONET (AErosol RObotic NETwork) and EARLINET (European Aerosol Research LIdar NETwork) databases are used. The sites considered are: Barcelona (41.38°N, 2.17°E), Burjassot (39.51°N, 0.42°W), Cabo da Roca (38.78°N, 9.50°W), Évora (38.57°N, 7.91°W), Granada (37.16°N, 3.61°W) and Madrid (40.45°N, 3.72°W). Large aerosol optical depths (AOD) and low Ångström exponents (AE) are observed. An AOD of 2.0 at 675¿nm is reached in several stations. A maximum peak of 2.5 is registered in Évora. During and around the peak of AOD, AEs close to 0 and even slightly negative are measured. With regard to vertically-resolved aerosol optical properties, particle backscatter coefficients as high as 15¿Mm-1¿sr-1 at 355¿nm are recorded at the lidar stations. Layer-mean lidar ratios are found in the range 40–55¿sr at 355¿nm and 34–61¿sr at 532¿nm during the event. The particle depolarization ratios are found to be constant inside the dust layer, and consistent from one site to another. Layer-mean values vary in the range 0.19–0.31. Another remarkable aspect of the event is the limited vertical distribution of the dust plume which never exceeds 5¿km. The extreme aspect of the event also presented a nice case for testing the ability of two dust forecast models, BSC-DREAM8b and NMMB/BSC-Dust, to reproduce the arrival, the vertical distribution and the intensity of the dust plume over a long-range transport region. In the particular case of the February 2017 dust event, we found a large underestimation in the forecast of the extinction coefficient provided by BSC-DREAM8b at all heights independently of the site. In contrast NMMB/BSC-Dust forecasts presented a better agreement with the observations, especially in southwestern part of the IP. With regard to the forecast skill as a function of lead time, no clear degradation of the prognostic is appreciated at 24, 48 and 72¿h for Évora and Granada stations (South). However the prognostic does degrade (bias increases and/or correlation decreases) for Barcelona (North), which is attributed to the fact that Barcelona is at a greater distance from the source region and to the singularity of the event., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Considerations about the determination of the depolarization calibration profile of a two-telescope lidar and its implications for volume depolarization ratio retrieval

  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Sicard, Michaël|||0000-0001-8287-9693
  • Barragán Cuesta, Rubén
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Granados Muñoz, María José
We propose a new method for calculating the volume depolarization ratio of light backscattered by the atmosphere and a lidar system that employs an auxiliary telescope to detect the depolarized component. It takes into account the possible error in the positioning of the polarizer used in the auxiliary telescope. The theory of operation is presented and then applied to a few cases for which the actual position of the polarizer is estimated, and the improvement of the volume depolarization ratio in the molecular region is quantified. In comparison to the method used before, i.e., without correction, the agreement between the volume depolarization ratio with correction and the theoretical value in the molecular region is improved by a factor of 2–2.5., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ceilometer-based rain-rate estimation: A case-study comparison with S-band radar and disdrometer retrievals in the context of VORTEX-SE

  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Barragán Cuesta, Rubén
  • Frasier, Stephen J.
  • Waldinger, Joseph
  • Turner, David Dave
  • Tanamachi, Robin
  • Dawson, Daniel
Attenuated backscatter measurements from a Vaisala CL31 ceilometer and a modified form of the well-known slope method are used to derive the ceilometer extinction profiles during rain events, restricted to rainfall rates (RRs) below approximately 10 mm/h. RR estimates from collocated S-band radar and portable disdrometer are used to derive the RR-to-extinction correlation models for the ceilometer-radar and ceilometer-disdrometer combinations. Data were collected during an intensive observation period of the Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) conducted in northern Alabama. These models are used to estimate the RR from the ceilometer observations in similar situations that do not have collocated radar or the disdrometer. Such correlation models are, however, limited by the different temporal and spatial resolutions of the measured variables, measurement capabilities of the instruments, and the inherent assumption of a homogeneous atmosphere. An empirical method based on extinction and RR uncertainty scoring and covariance fitting are proposed to solve, in part, these limitations., This work was supported by the National Oceanic and Atmospheric Administration (NOAA) under Grant NA1501R4590232 and Grant NA16OAR4590209 and by the Department of Earth, Atmospheric, and Planetary Sciences, Purdue University. CommSensLab-Universitat Politècnica de Catalunya (UPC) (which is a María de Maeztu Excellence Unit funded by the Agencia Estatal de Investigación, Spain; MDM-2016-0600) collaborated via Spanish Government - European Regional Development Funds under PGC2018-094132-B-I00 and TEC2015- 63832-P projects, and via European Union (funds) (EU) Funds under Grant H2020 ACTRIS-2 (GA-654109) and Grant ACTRIS-PPP (GA-739530). The work of Rubén Barragán was supported by the Spanish Ministry of Science, Innovation and Universities under Grant BES-2013-066340., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Climatological assessment of the vertically resolved optical and microphysical aerosol properties by lidar measurements, sun photometer, and in situ observations over 17 years at Universitat Politècnica de Catalunya (UPC) Barcelona

  • Lolli, Simone
  • Sicard, Michaël|||0000-0001-8287-9693
  • Amato, Francesco
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Gil Díaz, Cristina
  • Landi, Tony C.
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Dios Otín, Víctor Federico|||0000-0002-6720-8514
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Alastuey Urós, Andrés
  • Querol Carceller, Xavier
  • Reche Andúgar, Cristina
Aerosols are one of the most important pollutants in the atmosphere and have been monitored for the past few decades by remote sensing and in situ observation platforms to assess the effectiveness of government-managed reduction emission policies and assess their impact on the radiative budget of the Earth's atmosphere. In fact, aerosols can directly modulate incoming short-wave solar radiation and outgoing long-wave radiation and indirectly influence cloud formation, lifetime, and precipitation. In this study, we quantitatively evaluated long-term temporal trends and seasonal variability from a climatological point of view of the optical and microphysical properties of atmospheric particulate matter at the Universitat Politècnica de Catalunya (UPC), Barcelona, Spain, over the past 17 years, through a synergy of lidar, sun photometer, and in situ concentration measurements. Interannual temporal changes in aerosol optical and microphysical properties are evaluated through the seasonal Mann–Kendall test. Long-term trends in the optical depth of the recovered aerosol; the Ångström exponent (AE); and the concentrations of PM10, PM2.5, and PM1 reveal that emission reduction policies implemented in the past decades were effective in improving air quality, with consistent drops in PM concentrations and optical depth of aerosols. The seasonal analysis of the 17-year average vertically resolved aerosol profiles obtained from lidar observations shows that during summer the aerosol layer can be found up to an altitude of 5 km, after a sharp decay in the first kilometer. In contrast, during the other seasons, the backscatter profiles fit a pronounced exponential decay well with a well-defined scale height. Long-range transport, especially dust outbreaks from the Sahara, is likely to occur throughout the year. During winter, the dust aerosol layers are floating above the boundary layer, while during the other seasons they can penetrate the layer. The analysis also revealed that intense, short-duration pollution events during winter, associated with dust outbreaks, have become more frequent and intense since 2016. This study sheds some light on the meteorological processes and conditions that can lead to the formation of haze and helps decision makers adopt mitigation strategies to preserve large metropolitan areas in the Mediterranean basin., This research has been supported by the European Union through NextgenerationEU funds and by the following projects along the years: FP5 EARLINET project (grant no. ID EVR1-CT-1999-40003), FP6 EARLINET-ASOS (ID: 25991), FP7 ACTRIS (ID: 262254), H2020 ACTRIS-2 (ID: 654109), ACTRIS-PPP (ID: 739530), ACTRIS IMP (ID: 871115) and ATMO-ACCESS (ID: 101008004), projects of the Spanish National Research programs (grant nos. TIC 431/93, AMB96-1144-C02-01, REN2000-1907-CE, REN2000-1754- C02-02/CLI, REN2003-09753-C02-C02/CLI, REN2003-09753- C02-C CGL2008-01330-E/CLI 02/CLI, REN2002-12784-E, CGL2005-5131-E, CGL2006-27108-E/CLI, CGL2006-26149- E/CLI, CGL2007-28871-/CLI, CTM2006-27154-E/TECNO, TEC2006-07850/TCM, TEC2009-09106, TEC2012-34575, TEC2015-63832-P and PID2019-103886RB-I00), the project of the Catalan Regional Government IMMPACTE, and the ESA project (grant no. 21487/08/NL/HE), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The climatology of dust events over the European continent using data of the BSC-DREAM8b model

  • Mandija, Florian
  • Chavez Perez, V.M.
  • Nieto, R.
  • Sicard, Michaël|||0000-0001-8287-9693
  • Danylevsky, V.
  • Añel, J.A.
  • Gimeno, L.
© <2018>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Highlights The climatology of desert dust events over the whole European region is presented. This study is based on the data of BSC-DREAM8b model and other validation tools. AERONET and satellite data are used for validation of the model outputs. The most affected areas are the central sectors, mainly in spring and summertime. Main dust contributors, over the European region are the western and central Sahara., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Vertical separation of the atmospheric aerosol components by sign POLIPHON retrieval in polarized micro pulse lidar (P-MPL) measurements: case studies of specific climate-relevant aerosol types

  • Cordoba, Carmen
  • Sicard, Michaël|||0000-0001-8287-9693
  • Ansmann, Albert
  • del Aguila, Ana
  • Baars, Holger
POLIPHON (POlarization-LIdar PHOtometer Networking) retrieval consists in the vertical separation of two/three particle components in aerosol mixtures, highlighting their relative contributions in terms of the optical properties and mass concentrations. This method is based on the specific particle linear depolarization ratio given for different types of aerosols, and is applied to the new polarized Micro-Pulse Lidar (P-MPL). Case studies of specific climate-relevant aerosols (dust particles, fire smoke, and pollen aerosols, including a clean case as reference) observed over Barcelona (Spain) are presented in order to evaluate firstly the potential of P-MPLs measurements in combination with POLIPHON for retrieving the vertical separation of those particle components forming aerosol mixtures and their properties., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Separation of the optical and mass features of particle components in different aerosol mixtures by using POLIPHON retrievals in synergy with continuous polarized Micro-Pulse Lidar (P-MPL) measurements

  • Cordoba Jabonero, Carmen
  • Sicard, Michaël|||0000-0001-8287-9693
  • Ansmann, Albert
  • del Aguila, Ana
  • Baars, Holger
The application of the POLIPHON (POlarization-LIdar PHOtometer Networking) method is presented for the first time in synergy with continuous 24/7 polarized Micro-Pulse Lidar (P-MPL) measurements to derive the vertical separation of two or three particle components in different aerosol mixtures, and the retrieval of their particular optical properties. The procedure of extinction-to-mass conversion, together with an analysis of the mass extinction efficiency (MEE) parameter, is described, and the relative mass contribution of each aerosol component is also derived in a further step. The general POLIPHON algorithm is based on the specific particle linear depolarization ratio given for different types of aerosols and can be run in either 1-step (POL-1) or 2 steps (POL-2) versions with dependence on either the 2- or 3-component separation. In order to illustrate this procedure, aerosol mixing cases observed over Barcelona (NE Spain) are selected: a dust event on 5 July 2016, smoke plumes detected on 23 May 2016 and a pollination episode observed on 23 March 2016. In particular, the 3-component separation is just applied for the dust case: a combined POL-1 with POL-2 procedure (POL-1/2) is used, and additionally the fine-dust contribution to the total fine mode (fine dust plus non-dust aerosols) is estimated. The high dust impact before 12:00UTC yields a mean mass loading of 0.6±0.1gm-2 due to the prevalence of Saharan coarse-dust particles. After that time, the mean mass loading is reduced by two-thirds, showing a rather weak dust incidence. In the smoke case, the arrival of fine biomass-burning particles is detected at altitudes as high as 7km. The smoke particles, probably mixed with less depolarizing non-smoke aerosols, are observed in air masses, having their origin from either North American fires or the Arctic area, as reported by HYSPLIT back-trajectory analysis. The particle linear depolarization ratio for smoke shows values in the 0.10–0.15 range and even higher at given times, and the daily mean smoke mass loading is 0.017±0.008gm-2, around 3% of that found for the dust event. Pollen particles are detected up to 1.5km in height from 10:00UTC during an intense pollination event with a particle linear depolarization ratio ranging between 0.10 and 0.15. The maximal mass loading of Platanus pollen particles is 0.011±0.003gm-2, representing around 2% of the dust loading during the higher dust incidence. Regarding the MEE derived for each aerosol component, their values are in agreement with others referenced in the literature for the specific aerosol types examined in this work: 0.5±0.1 and 1.7±0.2m2g-1 are found for coarse and fine dust particles, 4.5±1.4m2g-1 is derived for smoke and 2.4±0.5m2g-1 for non-smoke aerosols with Arctic origin, and a MEE of 2.4±0.8m2g-1 is obtained for pollen particles, though it can reach higher or lower values depending on predominantly smaller or larger pollen grain sizes. Results reveal the high potential of the P-MPL system, a simple polarization-sensitive elastic backscatter lidar working in a 24/7 operation mode, to retrieve the relative optical and mass contributions of each aerosol component throughout the day, reflecting the daily variability of their properties. In fact, this procedure can be simply implemented in other P-MPLs that also operate within the worldwide Micro-Pulse Lidar Network (MPLNET), thus extending the aerosol discrimination at a global scale. Moreover, the method has the advantage of also being relatively easily applicable to space-borne lidars with an equivalent configuration such as the ongoing Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) on board NASA CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) and the forthcoming Atmospheric Lidar (ATLID) on board the ESA EarthCARE mission., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Profiling of aerosol microphysical properties at several EARLINET/AERONET sites during the July 2012 ChArMEx/EMEP campaign

  • Granados Muñoz, María José
  • Navas Guzmán, Francisco
  • Guerrero Rascado, Juan Luis
  • Bravo Aranda, Juan Antonio
  • Binietoglou, Ioannis
  • Nepomuceno Pereira, Sergio
  • Basart Alpuente, Sara
  • Baldasano Recio, José María|||0000-0002-6191-635X
  • Belegante, Livio
  • Chaikovsky, Anatoli
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • D'Amico, Giuseppe
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rodríguez, Alejandro
  • Sicard, Michaël|||0000-0001-8287-9693
  • Nickovic, Slobodan
  • Papayannis, Alexander
  • Pappalardo, Gelsomina
  • Wandinger, Ulla
  • Alados Arboledas, Lucas
The simultaneous analysis of aerosol microphysical properties profiles at different European stations is made in the framework of the ChArMEx/EMEP 2012 field campaign (9-11 July 2012). During and in support of this campaign, five lidar ground-based stations (Athens, Barcelona, Bucharest, A parts per thousand vora, and Granada) performed 72aEuro-h of continuous lidar measurements and collocated and coincident sun-photometer measurements. Therefore it was possible to retrieve volume concentration profiles with the Lidar Radiometer Inversion Code (LIRIC). Results indicated the presence of a mineral dust plume affecting the western Mediterranean region (mainly the Granada station), whereas a different aerosol plume was observed over the Balkans area. LIRIC profiles showed a predominance of coarse spheroid particles above Granada, as expected for mineral dust, and an aerosol plume composed mainly of fine and coarse spherical particles above Athens and Bucharest. Due to the exceptional characteristics of the ChArMEx database, the analysis of the microphysical properties profiles' temporal evolution was also possible. An in-depth analysis was performed mainly at the Granada station because of the availability of continuous lidar measurements and frequent AERONET inversion retrievals. The analysis at Granada was of special interest since the station was affected by mineral dust during the complete analyzed period. LIRIC was found to be a very useful tool for performing continuous monitoring of mineral dust, allowing for the analysis of the dynamics of the dust event in the vertical and temporal coordinates. Results obtained here illustrate the importance of having collocated and simultaneous advanced lidar and sun-photometer measurements in order to characterize the aerosol microphysical properties in both the vertical and temporal coordinates at a regional scale. In addition, this study revealed that the use of the depolarization information as input in LIRIC in the stations of Bucharest, A parts per thousand vora, and Granada was crucial for the characterization of the aerosol types and their distribution in the vertical column, whereas in stations lacking depolarization lidar channels, ancillary information was needed. Results obtained were also used for the validation of different mineral dust models. In general, the models better forecast the vertical distribution of the mineral dust than the column-integrated mass concentration, which was underestimated in most of the cases., This work was supported by the Andalusia Regional Government through projects P12-RNM-2409 and P10-RNM-6299, by the Spanish Ministry of Economy and Competitiveness through projects TEC2012-34575, TEC2015-63832-P, CGL2013-45410-R, CGL2011-13580-E/CLI, CGL2011-16124-E, and CGL2013-46736-R; by the Spanish Ministry of Science and Innovation (project UNPC10-4E-442); the EU through the H2020 project ACTRIS2 (contract number 654109); by the University of Granada through the contract “Plan Propio. Programa 9. Convocatoria 2013”; and by the Department of Economy and Knowledge of the Catalan autonomous government (grant 2014 SGR 583). M. J. Granados-Muñoz was funded under grant AP2009-0552 from the Spanish Ministry of Education and Science. S. N. Pereira was funded under fellowship SFRH/BPD/81132/2011 and projects FCOMP-01-0124-FEDER-029212 (PTDC/GEO-MET/4222/2012 from the Portuguese Government). S. Basart and J. M. Baldasano acknowledge the CICYT project (CGL2010-19652 and CGL2013-46736) and Severo Ochoa Programme (SEV-2011-00067) of the Spanish Government. BSC-DREAM8b and NMMB/BSC-Dust simulations were performed on the Mare Nostrum supercomputer hosted by Barcelona Supercomputing Center-Centro Nacional de Supercomputación (BSC-CNS). This paper was realized also as a part of the project III43007 financed by the Ministry of Education and Science of the Republic of Serbia within the framework of integrated and interdisciplinary research for the period 2011–2015. It has also received funding from the European Union’s Seventh Framework Programme for research, technological development, and demonstration under grant agreement no. 289923 – ITaRS. The CIMEL calibration was performed at the AERONET-EUROPE calibration center, supported by ACTRIS-2 (EUH2020 grant agreement no. 654109. The authors express gratitude to the NOAA Air Resources Laboratory for the HYSPLIT transport and dispersion model; the ICARE Data and Services Center the MODIS team; and the ChArMEx project of the MISTRALS (Mediterranean Integrated Studies at Regional And Local Scales; http://www.mistrals-home.org) multidisciplinary research programme., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Modelling of airborne pollen dispersion in the atmosphere in the Catalonia region, Spain: model description, emission scheme and evaluation of model performance for the case of Pinus

  • Sicard, Michaël|||0000-0001-8287-9693
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • Izquierdo Miguel, Rebeca
  • Alarcón Jordán, Marta|||0000-0002-0938-6873
  • De Linares, Concepción
  • Belmonte Soler, Jordina
Pollination is a biologically-relevant process that affects the structure of ecosystems since pollen contributes to determine the spatial distribution of plant species. It is thus of interest for mapping ecosystem services for policy support and decision making to increase our knowledge of pollen grain behavior in the atmosphere (source, emission, processes involved during their transport, etc.) at fine temporal and spatial scales. First simulations with the Barcelona Supercomputing Center MONARCH dispersion model of Pinus pollen in the atmosphere were performed during a 5-day pollination event observed in Barcelona, Spain, between 27 – 31 March, 2015. MONARCH is an online atmospheric composition model that solves the life cycle of water vapor, gases and aerosols within a meteorological model. A new aerosol emission scheme for pollen grains has been implemented in the system. The emission scheme considers wind speed at 10 m and friction velocity as main drivers of the mobilization of Pinus pollen grains. The meteorological information is available for the emission scheme at each meteorological integration time step. The spatial distribution of the pine species (P. halepensis, P. pinea) that pollinate from February to April in Catalonia has been derived from the Cartography of habitats of Catalonia and the tree density was obtained from the Forest Inventory of Catalonia. A domain over north-east Spain at 9 km x 9 km horizontal resolution covering Catalonia is designed with 48 vertical layers. The initial meteorological conditions are derived from ERA-5. To evaluate the model performances, the simulations are compared (i) to ground-based concentration measurements performed with a Hirst collector in Barcelona downtown, and (ii) to vertically-resolved measurements performed 4 km west of Barcelona downtown with a Micro Pulse Lidar (MPL). A method based on the lidar polarization capabilities was used to retrieve the contribution of the pollen to the total signal. The conversion from optical lidar-retrieved properties to concentration was optimized by minimizing the sum of the squared deviations between the lidar-retrieved concentration at the first height and the true (Hirst) concentration measured at the ground. In terms of ground-based concentration, the simulations look usually good in the morning and worsen in the afternoon. As far as the vertical distribution of airborne Pinus pollen is concerned, simulations reproduce well the shape of the profiles but the intensity tends to be under estimated. Three major limitations are identified with the model runs: (1) the poorly known phenology emission function, (2) the temporal development of the convective planetary boundary layer, which directly affects the vertical structure of the pollen dispersion; (3) the development of the sea breeze and a proper representation of the sea coast line, that plays a significant role on the skills of the meteorological mesoscale model., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

First forecasts of airborne platanus and pinus pollen in Catalonia, NE Spain: use of a ground-based LiDar to estimate the model score

  • Sicard, Michaël|||0000-0001-8287-9693
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • Izquierdo Miguel, Rebeca
  • Alarcón Jordán, Marta|||0000-0002-0938-6873
  • Belmonte Soler, Jordina
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • De Linares, Concepción
  • Baldasano Recio, José María|||0000-0002-6191-635X
Pollen allergenicity plays an important role on human health and wellness. It is thus of large public interest to increase our knowledge of pollen grain behavior in the atmosphere (source, emission, processes involved during their transport, etc.) at fine temporal and spatial scales. First simulations with the Barcelona Supercomputing Center NMMB-MONARCHv1.0 model of Platanus and Pinus dispersion in the atmosphere were performed during a 5-day pollination event observed in Barcelona, Spain, between 27 - 31 March, 2015. The simulations are compared to vertical profiles measured with the continuous Barcelona Micro Pulse Lidar system. Improvements in the model are made by tuning the wind effect scale factor and the sedimentation speed. First results show that the vertical distribution is well reproduced by the model in shape, but not in intensity, the model largely underestimating in the afternoon. Guidelines are proposed to improve the dispersion of airborne pollen by numerical prediction models., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Characterization of aerosol hygroscopicity using Raman lidar measurements at the EARLINET station of Payerne

  • Navas Guzmán, Francisco
  • Martucci, Giovanni
  • Collaud Coen, Martine
  • Granados Muñoz, María José
  • Hervo, Maxime
  • Sicard, Michaël|||0000-0001-8287-9693
  • Haefele, Alexander
This study focuses on the analysis of aerosol hygroscopicity using remote sensing techniques. Continuous observations of aerosol backscatter coefficient (ßaer), temperature (T) and water vapor mixing ratio (r) have been performed by means of a Raman lidar system at the aerological station of MeteoSwiss at Payerne (Switzerland) since 2008. These measurements allow us to monitor in a continuous way any change in aerosol properties as a function of the relative humidity (RH). These changes can be observed either in time at a constant altitude or in altitude at a constant time. The accuracy and precision of RH measurements from the lidar have been evaluated using the radiosonde (RS) technique as a reference. A total of 172 RS profiles were used in this intercomparison, which revealed a bias smaller than 4¿%¿RH and a standard deviation smaller than 10¿%¿RH between both techniques in the whole (in lower) troposphere at nighttime (at daytime), indicating the good performance of the lidar for characterizing RH. A methodology to identify situations favorable to studying aerosol hygroscopicity has been established, and the aerosol hygroscopicity has been characterized by means of the backscatter enhancement factor (fß). Two case studies, corresponding to different types of aerosol, are used to illustrate the potential of this methodology. The first case corresponds to a mixture of rural aerosol and smoke particles (smoke mixture), which showed a higher hygroscopicity (f355ß=2.8 and f1064ß=1.8 in the RH range 73¿%–97¿%) than the second case, in which mineral dust was present (f355ß=1.2 and f1064ß=1.1in the RH range 68¿%–84¿%). The higher sensitivity of the shortest wavelength to hygroscopic growth was qualitatively reproduced using Mie simulations. In addition, a good agreement was found between the hygroscopic analysis done in the vertical and in time for Case I, where the latter also allowed us to observe the hydration and dehydration of the smoke mixture. Finally, the impact of aerosol hygroscopicity on the Earth's radiative balance has been evaluated using the GAME (Global Atmospheric Model) radiative transfer model. The model showed an impact with an increase in absolute value of 2.4¿W¿m-2 at the surface with respect to the dry conditions for the hygroscopic layer of Case I (smoke mixture)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Vertical Azimuth Display simulator for wind-Doppler lidar error assessment

  • Tiana Alsina, Jordi|||0000-0001-8359-9378
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
(c) 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works., This works presents a simplified Vertical Azimuth Display (VAD) motion simulator for off-shore wind lidars. The simulator is rooted to the case of a conically-scanning lidar (e.g., the Zephyr lidar), where the wind speed vector is retrieved from the Line-of-Sight velocities over one scan period. The methodological part addresses the geometrical foundations of the simulator and how the lidar attitude is assimilated in matrix form. The discussion part considers the case of time-invariant, horizontally-homogeneous wind under two motional cases of the lidar, static and dynamic. Cases examples are parameterized by Horizontal Wind Speed, Wind Direction and tilt amplitude.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Estimation of the motion-induced horizontal-wind-speed standard deviation in an offshore doppler lidar

  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Tiana Alsina, Jordi|||0000-0001-8359-9378
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This work presents a new methodology to estimate the motion-induced standard deviation and related turbulence intensity on the retrieved horizontal wind speed by means of the velocity-azimuth-display algorithm applied to the conical scanning pattern of a floating Doppler lidar. The method considers a ZephIR™300 continuous-wave focusable Doppler lidar and does not require access to individual line-of-sight radial-wind information along the scanning pattern. The method combines a software-based velocity-azimuth-display and motion simulator and a statistical recursive procedure to estimate the horizontal wind speed standard deviation—as a well as the turbulence intensity—due to floating lidar buoy motion. The motion-induced error is estimated from the simulator’s side by using basic motional parameters, namely, roll/pitch angular amplitude and period of the floating lidar buoy, as well as reference wind speed and direction measurements at the study height. The impact of buoy motion on the retrieved wind speed and related standard deviation is compared against a reference sonic anemometer and a reference fixed lidar over a 60-day period at the IJmuiden test site (the Netherlands). Individual case examples and an analysis of the overall campaign are presented. After the correction, the mean deviation in the horizontal wind speed standard deviation between the reference and the floating lidar was improved by about 70%, from 0.14 m/s (uncorrected) to -0.04 m/s (corrected), which makes evident the goodness of the method. Equivalently, the error on the estimated turbulence intensity (3–20 m/s range) reduced from 38% (uncorrected) to 4% (corrected)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Planetary boundary layer height variability over Athens, Greece, based on the synergy of Raman lidar and radiosonde data: application of the Kalman filter and other techniques (2011-2016)

  • Alexiou, Dimitrios
  • Kokkalis, Panagiotis
  • Papayannis, Alexandros
  • Rocadenbosch Burillo, Francisco
  • Argyrouli, Athina
  • Tsaknakis, Georgios
  • Tzanis, Chris G.
The temporal evolution of the Planetary Boundary Layer height over Athens, Greece for a 5-year period (2011-2016) is presented. Using the EOLE Raman lidar system, the range-corrected lidar signals were selected around 12:00 UTC and 00:00 UTC for a total of 332 cases (165 days and 167 nights). The Kalman filter and other techniques were used to determine PBL height. The mean PBL height was found to be around 1617±324 m (12:00 UTC) and 892±130 m (00:00 UTC)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Climatological assessment of the vertically resolved optical and microphysical aerosol properties by lidar measurements, sun photometer, and in situ observations over 17 years at Universitat Politècnica de Catalunya (UPC) Barcelona

  • Lolli, Simone
  • Sicard, Michaël
  • Amato, Francesco
  • Comerón Tejero, Adolfo
  • Gil Díaz, Cristina
  • Landi, Tony C.
  • Muñoz Porcar, Constantino
  • Oliveira, Daniel Camilo Fortunato dos Santos
  • Dios Otín, Víctor Federico
  • Rocadenbosch Burillo, Francisco
  • Rodríguez Gómez, Alejandro Antonio
  • Alastuey Urós, Andrés
  • Querol Carceller, Xavier
  • Reche Andúgar, Cristina
Aerosols are one of the most important pollutants in the atmosphere and have been monitored for the past few decades by remote sensing and in situ observation platforms to assess the effectiveness of government-managed reduction emission policies and assess their impact on the radiative budget of the Earth's atmosphere. In fact, aerosols can directly modulate incoming short-wave solar radiation and outgoing long-wave radiation and indirectly influence cloud formation, lifetime, and precipitation. In this study, we quantitatively evaluated long-term temporal trends and seasonal variability from a climatological point of view of the optical and microphysical properties of atmospheric particulate matter at the Universitat Politècnica de Catalunya (UPC), Barcelona, Spain, over the past 17 years, through a synergy of lidar, sun photometer, and in situ concentration measurements. Interannual temporal changes in aerosol optical and microphysical properties are evaluated through the seasonal Mann–Kendall test. Long-term trends in the optical depth of the recovered aerosol; the Ångström exponent (AE); and the concentrations of PM10, PM2.5, and PM1 reveal that emission reduction policies implemented in the past decades were effective in improving air quality, with consistent drops in PM concentrations and optical depth of aerosols. The seasonal analysis of the 17-year average vertically resolved aerosol profiles obtained from lidar observations shows that during summer the aerosol layer can be found up to an altitude of 5 km, after a sharp decay in the first kilometer. In contrast, during the other seasons, the backscatter profiles fit a pronounced exponential decay well with a well-defined scale height. Long-range transport, especially dust outbreaks from the Sahara, is likely to occur throughout the year. During winter, the dust aerosol layers are floating above the boundary layer, while during the other seasons they can penetrate the layer. The analysis also revealed that intense, short-duration pollution events during winter, associated with dust outbreaks, have become more frequent and intense since 2016. This study sheds some light on the meteorological processes and conditions that can lead to the formation of haze and helps decision makers adopt mitigation strategies to preserve large metropolitan areas in the Mediterranean basin., This research has been supported by the European Union through NextgenerationEU funds and by the following projects along the years: FP5 EARLINET project (grant no. ID EVR1-CT-1999-40003), FP6 EARLINET-ASOS (ID: 25991), FP7 ACTRIS (ID: 262254), H2020 ACTRIS-2 (ID: 654109), ACTRIS-PPP (ID: 739530), ACTRIS IMP (ID: 871115) and ATMO-ACCESS (ID: 101008004), projects of the Spanish National Research programs (grant nos. TIC 431/93, AMB96-1144-C02-01, REN2000-1907-CE, REN2000-1754- C02-02/CLI, REN2003-09753-C02-C02/CLI, REN2003-09753- C02-C CGL2008-01330-E/CLI 02/CLI, REN2002-12784-E, CGL2005-5131-E, CGL2006-27108-E/CLI, CGL2006-26149- E/CLI, CGL2007-28871-/CLI, CTM2006-27154-E/TECNO, TEC2006-07850/TCM, TEC2009-09106, TEC2012-34575, TEC2015-63832-P and PID2019-103886RB-I00), the project of the Catalan Regional Government IMMPACTE, and the ESA project (grant no. 21487/08/NL/HE), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Vertical separation of the atmospheric aerosol components by sign POLIPHON retrieval in polarized micro pulse lidar (P-MPL) measurements: case studies of specific climate-relevant aerosol types

  • Cordoba, Carmen
  • Sicard, Michaël
  • Ansmann, Albert
  • del Aguila, Ana
  • Baars, Holger
POLIPHON (POlarization-LIdar PHOtometer Networking) retrieval consists in the vertical separation of two/three particle components in aerosol mixtures, highlighting their relative contributions in terms of the optical properties and mass concentrations. This method is based on the specific particle linear depolarization ratio given for different types of aerosols, and is applied to the new polarized Micro-Pulse Lidar (P-MPL). Case studies of specific climate-relevant aerosols (dust particles, fire smoke, and pollen aerosols, including a clean case as reference) observed over Barcelona (Spain) are presented in order to evaluate firstly the potential of P-MPLs measurements in combination with POLIPHON for retrieving the vertical separation of those particle components forming aerosol mixtures and their properties., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Extreme, wintertime Saharan dust intrusion in the Iberian Peninsula: lidar monitoring and evaluation of dust forecast models during the February 2017 event

  • Fernández García, Alfonso Javier
  • Sicard, Michaël
  • Costa, Maria João
  • Guerrero Rascado, Juan Luis
  • Gomez Amo, J.L.
  • Molero, Francisco
  • Barragán Cuesta, Rubén
  • Basart, Sara
  • Bortoli, D.
  • Bedoya Velásquez, Andrés Esteban
  • Granados Muñoz, María José
  • Martínez Lozano, José Antonio
  • Artiñano, Begoña
  • Muñoz Porcar, Constantino
  • Román Díez, Roberto
  • Rocadenbosch Burillo, Francisco
  • Benavent Oltra, José Antonio
  • Rodríguez Gómez, Alejandro Antonio
  • Alados Arboledas, Lucas
  • Comerón Tejero, Adolfo
  • Pujadas Cordero, Manuel
An unprecedented extreme Saharan dust event was registered in winter time from 20 to 23 February 2017 over the Iberian Peninsula (IP). We report on aerosol optical properties observed under this extreme dust intrusion through passive and active remote sensing techniques. For that, AERONET (AErosol RObotic NETwork) and EARLINET (European Aerosol Research LIdar NETwork) databases are used. The sites considered are: Barcelona (41.38°N, 2.17°E), Burjassot (39.51°N, 0.42°W), Cabo da Roca (38.78°N, 9.50°W), Évora (38.57°N, 7.91°W), Granada (37.16°N, 3.61°W) and Madrid (40.45°N, 3.72°W). Large aerosol optical depths (AOD) and low Ångström exponents (AE) are observed. An AOD of 2.0 at 675¿nm is reached in several stations. A maximum peak of 2.5 is registered in Évora. During and around the peak of AOD, AEs close to 0 and even slightly negative are measured. With regard to vertically-resolved aerosol optical properties, particle backscatter coefficients as high as 15¿Mm-1¿sr-1 at 355¿nm are recorded at the lidar stations. Layer-mean lidar ratios are found in the range 40–55¿sr at 355¿nm and 34–61¿sr at 532¿nm during the event. The particle depolarization ratios are found to be constant inside the dust layer, and consistent from one site to another. Layer-mean values vary in the range 0.19–0.31. Another remarkable aspect of the event is the limited vertical distribution of the dust plume which never exceeds 5¿km. The extreme aspect of the event also presented a nice case for testing the ability of two dust forecast models, BSC-DREAM8b and NMMB/BSC-Dust, to reproduce the arrival, the vertical distribution and the intensity of the dust plume over a long-range transport region. In the particular case of the February 2017 dust event, we found a large underestimation in the forecast of the extinction coefficient provided by BSC-DREAM8b at all heights independently of the site. In contrast NMMB/BSC-Dust forecasts presented a better agreement with the observations, especially in southwestern part of the IP. With regard to the forecast skill as a function of lead time, no clear degradation of the prognostic is appreciated at 24, 48 and 72¿h for Évora and Granada stations (South). However the prognostic does degrade (bias increases and/or correlation decreases) for Barcelona (North), which is attributed to the fact that Barcelona is at a greater distance from the source region and to the singularity of the event., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Vertical Azimuth Display simulator for wind-Doppler lidar error assessment

  • Tiana Alsina, Jordi
  • Rocadenbosch Burillo, Francisco
  • Gutiérrez Antuñano, Miguel Ángel
(c) 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works., This works presents a simplified Vertical Azimuth Display (VAD) motion simulator for off-shore wind lidars. The simulator is rooted to the case of a conically-scanning lidar (e.g., the Zephyr lidar), where the wind speed vector is retrieved from the Line-of-Sight velocities over one scan period. The methodological part addresses the geometrical foundations of the simulator and how the lidar attitude is assimilated in matrix form. The discussion part considers the case of time-invariant, horizontally-homogeneous wind under two motional cases of the lidar, static and dynamic. Cases examples are parameterized by Horizontal Wind Speed, Wind Direction and tilt amplitude., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance evaluation of a floating lidar buoy in nearshore conditions

  • Gutiérrez Antuñano, Miguel Ángel
  • Tiana Alsina, Jordi
  • Rocadenbosch Burillo, Francisco
This work provides a signal-processing and statistical-error analysis methodology to assess key performance indicators for a floating Doppler wind lidar. The study introduces the raw-to-clean data processing chain, error assessment indicators and key performance indicators, as well as two filtering methods at post-processing level to alleviate the impact of angular motion and spatial variability of the wind flow on the performance indicators. Towards this aim, the study mainly revisits horizontal wind speed (HWS) and turbulence intensity measurements with a floating ZephIR 300 lidar buoy during a 38 day nearshore test campaign in Pont del Petroli (Barcelona). Typical day cases along with overall statistics for the whole campaign are discussed to illustrate the methodology and processing tools developed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Synergy of Raman lidar and modeled temperature for relative humidity profiling: assessment and uncertainty analysis

  • Muñoz Porcar, Constantino
  • Sicard, Michaël
  • Granados Muñoz, María José
  • Barragán Cuesta, Rubén
  • Comerón Tejero, Adolfo
  • Rocadenbosch Burillo, Francisco
  • Rodríguez Gómez, Alejandro Antonio
  • García Vizcaíno, David
Relative humidity (RH) profiling using Raman lidars requires simultaneous range-resolved temperature and pressure data that are not always available. We propose and assess a method based on the use of a locally retrieved atmospheric model to estimate the temperature and pressure profiles. This model relies on the data from daily radiosonde launches at Barcelona during a five-year-long period (2015-2019). We have computed the range-resolved error of the model compared with the radiosonde ``true'' temperature profiles. Then, we have calculated the induced uncertainty in the recalculated RH profiles, finding that the standard deviation at 5 km is <15% for more than 80% of the radiosoundings. We have applied the method to a set of lidar measurements. We have first compared the resulting profiles with lidar retrievals using radiosonde temperatures, and we found differences that are compatible with the previous statistical analysis. We also compared them with in situ radiosonde humidity measurements, finding, in this case, bigger differences due to additional sources of error. Uncertainty analysis shows that the temperature model is the most significant error source below 4-5 km. For higher altitudes, the noise of the Raman signals may become the main contribution. We show that the resulting uncertainty (commonly <15% below 5 km) is compatible with the statistical analysis of the model and comparable with the ones obtained using other instruments for temperature profiling. We show that this method permits nocturnal lidar-based RH profiling with uncertainty estimation without the need for measured atmospheric profiles., This work was supported by the European Union H2020 program (grant agreement no. 654109, 778349), the Spanish Ministry of Economy and Competitivity (ref. TEC2015- 63832-P), the Spanish Ministry of Science and Innovation (ref. PID2019- 103886RB-I00, CGL2017-90884-REDT), the Department of Economy and Knowledge of the Catalan autonomous government (grant 2014 SGR583), the Unity of Excellence Maria de Maeztu (ref. MDM-2016-0600), which is financed by the Agencia Estatal de Investigación (AEI) and the Juan de la Cierva-Formación Program (grant FJCI-2015-23904)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

First forecasts of airborne platanus and pinus pollen in Catalonia, NE Spain: use of a ground-based LiDar to estimate the model score

  • Sicard, Michaël
  • Jorba Casellas, Oriol
  • Izquierdo Miguel, Rebeca
  • Alarcón Jordán, Marta
  • Belmonte Soler, Jordina
  • Comerón Tejero, Adolfo
  • De Linares, Concepción
  • Baldasano Recio, José María
Pollen allergenicity plays an important role on human health and wellness. It is thus of large public interest to increase our knowledge of pollen grain behavior in the atmosphere (source, emission, processes involved during their transport, etc.) at fine temporal and spatial scales. First simulations with the Barcelona Supercomputing Center NMMB-MONARCHv1.0 model of Platanus and Pinus dispersion in the atmosphere were performed during a 5-day pollination event observed in Barcelona, Spain, between 27 - 31 March, 2015. The simulations are compared to vertical profiles measured with the continuous Barcelona Micro Pulse Lidar system. Improvements in the model are made by tuning the wind effect scale factor and the sedimentation speed. First results show that the vertical distribution is well reproduced by the model in shape, but not in intensity, the model largely underestimating in the afternoon. Guidelines are proposed to improve the dispersion of airborne pollen by numerical prediction models., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A 1-D radiative transfer study of mineral dust during CHARMEX/ADRIMED 2013 campaign

  • Granados Muñoz, María José
  • Sicard, Michaël
  • Román Díez, Roberto
  • Benavent Oltra, Pablo
  • Barragán Cuesta, Rubén
  • Brogniez, G.
  • Denjean, Cyrielle
  • Alados-Arboledas, L
  • Muñoz Porcar, Constantino
  • Rodríguez Gómez, Alejandro Antonio
  • Comerón Tejero, Adolfo
A 1-D radiative transfer study is presented based on the measurements performed at Granada during a dust event within the framework of the ChArMEx/ADRIMED (Chemistry-Aerosol Mediterranean Experiment/Aerosol Direct Radiative Forcing on the Mediterranean Climate) campaign, during June 16-17, 2013. Ground-based AERONET and lidar measurements were performed and further processed with the GRASP algorithm to get spectrally-resolved profiles of extinction and single scattering albedo. Furthermore, the research aircraft ATR-42 made two flights above Granada providing vertical profiles of aerosol optical and microphysical properties together with measurements of broadband radiative fluxes. All of the ground-based and aircraft aerosol properties are used as input in the radiative transfer model GAME in order to evaluate its sensitivity to different input datasets. The aircraft fluxes are used for validation of the modelled ones., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Two-dimensional mineral dust radiative effect calculations from CALIPSO observations over Europe

  • Granados Muñoz, María José
  • Sicard, Michaël
  • Papagiannopoulos, Nikolaos
  • Barragán Cuesta, Rubén
  • Bravo Aranda, Juan Antonio
  • Nicolae, D.
A demonstration study to examine the feasibility of retrieving dust radiative effects based on combined satellite data from MODIS (Moderate Resolution Imaging Spectroradiometer), CERES (Clouds and the Earth's Radiant Energy System) and CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) lidar vertical profiles along their orbit is presented. The GAME (Global Atmospheric Model) radiative transfer model is used to estimate the shortwave and longwave dust radiative effects below the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite) orbit assuming an aerosol parameterization based on the CALIOP vertical distribution at a horizontal resolution of 5¿km and additional AERONET (Aerosol Robotic Network) data. Two study cases are analyzed: a strong long-range transport mineral dust event (aerosol optical depth, AOD, of 0.52) that originated in the Sahara Desert and reached the United Kingdom and a weaker event (AOD¿=¿0.16) that affected eastern Europe. The radiative fluxes obtained are first validated in terms of radiative efficiency at a single point with space–time colocated lidar ground-based measurements from EARLINET (European Aerosol Research Lidar Network) stations below the orbit. The methodology is then applied to the full orbit. The strong dependence of the radiative effects on the aerosol load (and to a lesser extent on the surface albedo) highlights the need for accurate AOD measurements for radiative studies. The calculated dust radiative effects and heating rates below the orbits are in good agreement with previous studies of mineral dust, with the radiative efficiency obtained at the surface ranging between -80.3 and -63.0¿W¿m-2 for lower dust concentration event and -119.1 and -79.3¿W¿m-2 for the strong event. Thus, results demonstrate the validity of the method presented here to retrieve 2-D accurate radiative properties with large spatial and temporal coverage., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of mineral dust on shortwave and longwave radiation: evaluation of different vertically resolved parameterizations in 1-D radiative transfer computations

  • Granados Muñoz, María José
  • Sicard, Michaël
  • Román Díez, Roberto
  • Benavent Oltra, Pablo
  • Barragán Cuesta, Rubén
  • Brogniez, G.
  • Denjean, Cyrielle
  • Mallet, Marc
  • Formenti, P
  • Torres, Banjamin
  • Alados Arboledas, Lucas
Aerosol radiative properties are investigated in southeastern Spain during a dust event on June 16-17, 2013 in the framework of the ChArMEx/ADRIMED (Chemistry-Aerosol Mediterranean Experiment /Aerosol Direct Radiative Impact on the regional climate in the MEDiterranean region) campaign. Particle optical and microphysical properties from ground-based sun/sky photometer and lidar measurements, as well as in situ measurements onboard the SAFIRE ATR 42 French research aircraft are used to create a set of different levels of input parameterizations, which feed the 1-D radiative transfer model (RTM) GAME (Global Atmospheric ModEl). We consider three datasets: 1) a first parameterization based on the retrievals by an advanced aerosol inversion code (GRASP; Generalized Retrieval of Aerosol and Surface Properties) applied to combined photometer and lidar data; 2) a parameterization based on the photometer columnar optical properties and vertically-resolved lidar retrievals with the two-component Klett-Fernald algorithm; and 3) a parameterization based on vertically-resolved optical and microphysical aerosol properties measured in situ by the aircraft instrumentation. Once retrieved, the outputs of the RTM in terms of both shortwave and longwave radiative fluxes are compared against ground and in situ airborne measurements. In addition, the outputs of the model in terms of the aerosol direct radiative effect are discussed with respect to the different input parameterizations. Results show that calculated atmospheric radiative fluxes differ no more than 7 % to the measured ones. The three parameterization datasets produce a cooling effect due to mineral dust both at the surface and the top of the atmosphere. Aerosol radiative effects with differences up to 10 W·m-2 in the shortwave spectral range (mostly due to differences in the aerosol optical depth), and 2 W·m-2 for the longwave (mainly due to differences in the aerosol optical depth but also to the coarse mode radius used to calculate the radiative properties) are obtained when comparing the three parameterizations. The study reveals the complexity of parametrizing 1-D RTMs as sizing and characterising the optical properties of mineral dust is challenging. The use of advanced remote sensing data and processing, in combination with closure studies on the optical/microphysical properties from in situ aircraft measurements when available, is recommended., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Progress toward characterization of the atmospheric boundary layer over northern Alabama using observations by a vertically pointing, S-band profiling radar during VORTEX-Southeast

  • Tanamachi, Robin
  • Frasier, Steve
  • Waldinger, Joseph
  • LaFleur, Allison T.
  • Turner, David Dave
  • Rocadenbosch Burillo, Francisco
During spring 2016 and spring 2017, a vertically pointing, S-band FMCW radar (UMass FMCW) was deployed in northern Alabama under the auspices of the Verification of the Origins of Rotation in Tornadoes Experiment (VORTEX) – Southeast. In total, ~14 weeks’ worth of data were collected, in conditions ranging from quiescent clear skies to severe thunderstorms. The principal objective of these deployments was to characterize the boundary layer evolution near the VORTEX-Southeast domain. In this paper, we describe intermediate results in service of this objective. Specifically, we describe updates to the UMass FMCW system, document its deployments for VORTEX-Southeast, and apply three automated algorithms: (1) an dealiasing algorithm to the Doppler velocities, (2) a fuzzy logic scatterer classification scheme to separate precipitation from non-precipitation observations, (3) a bright band / melting layer identification algorithm for stratiform precipitation, and (4) an extended Kalman filter-based convective boundary layer depth (mixing height) measurement algorithm for non-precipitation observations. Results from the latter two applications are qualitatively verified against retrieved soundings from a collocated thermodynamic profiling system., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Modelling of pollen dispersion in the atmosphere: evaluation with a continuous 1ß+1d lidar

  • Sicard, Michaël
  • Izquierdo, Rebeca
  • Jorba i Casellas, Oriol
  • Alarcón Jordán, Marta
  • Belmonte Soler, Jordina
  • Comerón Tejero, Adolfo
  • De Linares, Concepción
  • Baldasano Recio, José María
Pollen allergenicity plays an important role on human health and wellness. It is thus of large public interest to increase our knowledge of pollen grain behavior in the atmosphere (source, emission, processes involved during their transport, etc.) at fine temporal and spatial scales. First simulations with the Barcelona Supercomputing Center NMMB/BSC-CTM model of Platanus and Pinus dispersion in the atmosphere were performed during a 5-day pollination event observed in Barcelona, Spain, between 27 – 31 March, 2015. The simulations are compared to vertical profiles measured with the continuous Barcelona Micro Pulse Lidar system. First results show that the vertical distribution is well reproduced by the model in shape, but not in intensity, the model largely underestimating in the afternoon. Guidelines are proposed to improve the dispersion of airborne pollen by numerical prediction models., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The unprecedented 2017-2018 stratospheric smoke event: decay phase and aerosol properties observed with the EARLINET

  • Baars, Holger
  • Ansmann, Albert
  • Ohneiser, Kevin
  • Sicard, Michaël
  • Comerón Tejero, Adolfo
Six months of stratospheric aerosol observations with the European Aerosol Research Lidar Network (EARLINET) from August 2017 to January 2018 are presented. The decay phase of an unprecedented, record-breaking stratospheric perturbation caused by wildfire smoke is reported and discussed in terms of geometrical, optical, and microphysical aerosol properties. Enormous amounts of smoke were injected into the upper troposphere and lower stratosphere over fire areas in western Canada on 12 August 2017 during strong thunderstorm–pyrocumulonimbus activity. The stratospheric fire plumes spread over the entire Northern Hemisphere in the following weeks and months. Twenty-eight European lidar stations from northern Norway to southern Portugal and the eastern Mediterranean monitored the strong stratospheric perturbation on a continental scale. The main smoke layer (over central, western, southern, and eastern Europe) was found at heights between 15 and 20¿km since September 2017 (about 2 weeks after entering the stratosphere). Thin layers of smoke were detected at heights of up to 22–23¿km. The stratospheric aerosol optical thickness at 532¿nm decreased from values >¿0.25 on 21–23 August 2017 to 0.005–0.03 until 5–10 September and was mainly 0.003–0.004 from October to December 2017 and thus was still significantly above the stratospheric background (0.001–0.002). Stratospheric particle extinction coefficients (532¿nm) were as high as 50–200¿Mm-1 until the beginning of September and on the order of 1¿Mm-1 (0.5–5¿Mm-1) from October 2017 until the end of January 2018. The corresponding layer mean particle mass concentration was on the order of 0.05–0.5¿µg¿m-3 over these months. Soot particles (light-absorbing carbonaceous particles) are efficient ice-nucleating particles (INPs) at upper tropospheric (cirrus) temperatures and available to influence cirrus formation when entering the tropopause from above. We estimated INP concentrations of 50–500¿L-1 until the first days in September and afterwards 5–50¿L-1 until the end of the year 2017 in the lower stratosphere for typical cirrus formation temperatures of -55¿°C and an ice supersaturation level of 1.15. The measured profiles of the particle linear depolarization ratio indicated a predominance of nonspherical smoke particles. The 532¿nm depolarization ratio decreased slowly with time in the main smoke layer from values of 0.15–0.25 (August–September) to values of 0.05–0.10 (October–November) and <¿0.05 (December–January). The decrease of the depolarization ratio is consistent with aging of the smoke particles, growing of a coating around the solid black carbon core (aggregates), and thus change of the shape towards a spherical form. We found ascending aerosol layer features over the most southern European stations, especially over the eastern Mediterranean at 32–35°¿N, that ascended from heights of about 18–19 to 22–23¿km from the beginning of October to the beginning of December 2017 (about 2¿km per month). We discuss several transport and lifting mechanisms that may have had an impact on the found aerosol layering structures., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Compact lidar system using laser diode, binary continuous wave power modulation, and an avalanche photodiode-based receiver controlled by a digital signal processor

  • Ardanuy Dellà, Antoni
  • Comerón Tejero, Adolfo
We analyze the practical limits of a lidar system based on the use of a laser diode, random binary continuous wave power modulation, and an avalanche photodiode (APD)-based photereceiver, combined with the control and computing power of the digital signal processors (DSP) currently available. The target is to design a compact portable lidar system made all in semiconductor technology, with a low-power demand and an easy configuration of the system, allowing change in some of its features through software. Unlike many prior works, we emphasize the use of APDs instead of photomultiplier tubes to detect the return signal and the application of the system to measure not only hard targets, but also medium-range aerosols and clouds. We have developed an experimental prototype to evaluate the behavior of the system under different environmental conditions. Experimental results provided by the prototype are presented and discussed., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The climatology of dust events over the European continent using data of the BSC-DREAM8b model

  • Mandija, Florian
  • Chavez Perez, V.M.
  • Nieto, R.
  • Sicard, Michaël
  • Danylevsky, V.
  • Añel, J.A.
  • Gimeno, L.
© <2018>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Highlights The climatology of desert dust events over the whole European region is presented. This study is based on the data of BSC-DREAM8b model and other validation tools. AERONET and satellite data are used for validation of the model outputs. The most affected areas are the central sectors, mainly in spring and summertime. Main dust contributors, over the European region are the western and central Sahara., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Separation of the optical and mass features of particle components in different aerosol mixtures by using POLIPHON retrievals in synergy with continuous polarized Micro-Pulse Lidar (P-MPL) measurements

  • Cordoba Jabonero, Carmen
  • Sicard, Michaël
  • Ansmann, Albert
  • del Aguila, Ana
  • Baars, Holger
The application of the POLIPHON (POlarization-LIdar PHOtometer Networking) method is presented for the first time in synergy with continuous 24/7 polarized Micro-Pulse Lidar (P-MPL) measurements to derive the vertical separation of two or three particle components in different aerosol mixtures, and the retrieval of their particular optical properties. The procedure of extinction-to-mass conversion, together with an analysis of the mass extinction efficiency (MEE) parameter, is described, and the relative mass contribution of each aerosol component is also derived in a further step. The general POLIPHON algorithm is based on the specific particle linear depolarization ratio given for different types of aerosols and can be run in either 1-step (POL-1) or 2 steps (POL-2) versions with dependence on either the 2- or 3-component separation. In order to illustrate this procedure, aerosol mixing cases observed over Barcelona (NE Spain) are selected: a dust event on 5 July 2016, smoke plumes detected on 23 May 2016 and a pollination episode observed on 23 March 2016. In particular, the 3-component separation is just applied for the dust case: a combined POL-1 with POL-2 procedure (POL-1/2) is used, and additionally the fine-dust contribution to the total fine mode (fine dust plus non-dust aerosols) is estimated. The high dust impact before 12:00UTC yields a mean mass loading of 0.6±0.1gm-2 due to the prevalence of Saharan coarse-dust particles. After that time, the mean mass loading is reduced by two-thirds, showing a rather weak dust incidence. In the smoke case, the arrival of fine biomass-burning particles is detected at altitudes as high as 7km. The smoke particles, probably mixed with less depolarizing non-smoke aerosols, are observed in air masses, having their origin from either North American fires or the Arctic area, as reported by HYSPLIT back-trajectory analysis. The particle linear depolarization ratio for smoke shows values in the 0.10–0.15 range and even higher at given times, and the daily mean smoke mass loading is 0.017±0.008gm-2, around 3% of that found for the dust event. Pollen particles are detected up to 1.5km in height from 10:00UTC during an intense pollination event with a particle linear depolarization ratio ranging between 0.10 and 0.15. The maximal mass loading of Platanus pollen particles is 0.011±0.003gm-2, representing around 2% of the dust loading during the higher dust incidence. Regarding the MEE derived for each aerosol component, their values are in agreement with others referenced in the literature for the specific aerosol types examined in this work: 0.5±0.1 and 1.7±0.2m2g-1 are found for coarse and fine dust particles, 4.5±1.4m2g-1 is derived for smoke and 2.4±0.5m2g-1 for non-smoke aerosols with Arctic origin, and a MEE of 2.4±0.8m2g-1 is obtained for pollen particles, though it can reach higher or lower values depending on predominantly smaller or larger pollen grain sizes. Results reveal the high potential of the P-MPL system, a simple polarization-sensitive elastic backscatter lidar working in a 24/7 operation mode, to retrieve the relative optical and mass contributions of each aerosol component throughout the day, reflecting the daily variability of their properties. In fact, this procedure can be simply implemented in other P-MPLs that also operate within the worldwide Micro-Pulse Lidar Network (MPLNET), thus extending the aerosol discrimination at a global scale. Moreover, the method has the advantage of also being relatively easily applicable to space-borne lidars with an equivalent configuration such as the ongoing Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) on board NASA CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) and the forthcoming Atmospheric Lidar (ATLID) on board the ESA EarthCARE mission., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An example from the Basic Engineering Project subject at the UPC Telecom-BCN School: learning radiofrequency links, antennas and amplifiers with the help of recycled materials

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Estimation of the motion-induced horizontal-wind-speed standard deviation in an offshore doppler lidar

  • Gutiérrez Antuñano, Miguel Ángel
  • Tiana Alsina, Jordi
  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
This work presents a new methodology to estimate the motion-induced standard deviation and related turbulence intensity on the retrieved horizontal wind speed by means of the velocity-azimuth-display algorithm applied to the conical scanning pattern of a floating Doppler lidar. The method considers a ZephIR™300 continuous-wave focusable Doppler lidar and does not require access to individual line-of-sight radial-wind information along the scanning pattern. The method combines a software-based velocity-azimuth-display and motion simulator and a statistical recursive procedure to estimate the horizontal wind speed standard deviation—as a well as the turbulence intensity—due to floating lidar buoy motion. The motion-induced error is estimated from the simulator’s side by using basic motional parameters, namely, roll/pitch angular amplitude and period of the floating lidar buoy, as well as reference wind speed and direction measurements at the study height. The impact of buoy motion on the retrieved wind speed and related standard deviation is compared against a reference sonic anemometer and a reference fixed lidar over a 60-day period at the IJmuiden test site (the Netherlands). Individual case examples and an analysis of the overall campaign are presented. After the correction, the mean deviation in the horizontal wind speed standard deviation between the reference and the floating lidar was improved by about 70%, from 0.14 m/s (uncorrected) to -0.04 m/s (corrected), which makes evident the goodness of the method. Equivalently, the error on the estimated turbulence intensity (3–20 m/s range) reduced from 38% (uncorrected) to 4% (corrected)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ceilometer-based rain-rate estimation: A case-study comparison with S-band radar and disdrometer retrievals in the context of VORTEX-SE

  • Rocadenbosch Burillo, Francisco
  • Barragán Cuesta, Rubén
  • Frasier, Stephen J.
  • Waldinger, Joseph
  • Turner, David Dave
  • Tanamachi, Robin
  • Dawson, Daniel
Attenuated backscatter measurements from a Vaisala CL31 ceilometer and a modified form of the well-known slope method are used to derive the ceilometer extinction profiles during rain events, restricted to rainfall rates (RRs) below approximately 10 mm/h. RR estimates from collocated S-band radar and portable disdrometer are used to derive the RR-to-extinction correlation models for the ceilometer-radar and ceilometer-disdrometer combinations. Data were collected during an intensive observation period of the Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) conducted in northern Alabama. These models are used to estimate the RR from the ceilometer observations in similar situations that do not have collocated radar or the disdrometer. Such correlation models are, however, limited by the different temporal and spatial resolutions of the measured variables, measurement capabilities of the instruments, and the inherent assumption of a homogeneous atmosphere. An empirical method based on extinction and RR uncertainty scoring and covariance fitting are proposed to solve, in part, these limitations., This work was supported by the National Oceanic and Atmospheric Administration (NOAA) under Grant NA1501R4590232 and Grant NA16OAR4590209 and by the Department of Earth, Atmospheric, and Planetary Sciences, Purdue University. CommSensLab-Universitat Politècnica de Catalunya (UPC) (which is a María de Maeztu Excellence Unit funded by the Agencia Estatal de Investigación, Spain; MDM-2016-0600) collaborated via Spanish Government - European Regional Development Funds under PGC2018-094132-B-I00 and TEC2015- 63832-P projects, and via European Union (funds) (EU) Funds under Grant H2020 ACTRIS-2 (GA-654109) and Grant ACTRIS-PPP (GA-739530). The work of Rubén Barragán was supported by the Spanish Ministry of Science, Innovation and Universities under Grant BES-2013-066340., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization of aerosol hygroscopicity using Raman lidar measurements at the EARLINET station of Payerne

  • Navas Guzmán, Francisco
  • Martucci, Giovanni
  • Collaud Coen, Martine
  • Granados Muñoz, María José
  • Hervo, Maxime
  • Sicard, Michaël
  • Haefele, Alexander
This study focuses on the analysis of aerosol hygroscopicity using remote sensing techniques. Continuous observations of aerosol backscatter coefficient (ßaer), temperature (T) and water vapor mixing ratio (r) have been performed by means of a Raman lidar system at the aerological station of MeteoSwiss at Payerne (Switzerland) since 2008. These measurements allow us to monitor in a continuous way any change in aerosol properties as a function of the relative humidity (RH). These changes can be observed either in time at a constant altitude or in altitude at a constant time. The accuracy and precision of RH measurements from the lidar have been evaluated using the radiosonde (RS) technique as a reference. A total of 172 RS profiles were used in this intercomparison, which revealed a bias smaller than 4¿%¿RH and a standard deviation smaller than 10¿%¿RH between both techniques in the whole (in lower) troposphere at nighttime (at daytime), indicating the good performance of the lidar for characterizing RH. A methodology to identify situations favorable to studying aerosol hygroscopicity has been established, and the aerosol hygroscopicity has been characterized by means of the backscatter enhancement factor (fß). Two case studies, corresponding to different types of aerosol, are used to illustrate the potential of this methodology. The first case corresponds to a mixture of rural aerosol and smoke particles (smoke mixture), which showed a higher hygroscopicity (f355ß=2.8 and f1064ß=1.8 in the RH range 73¿%–97¿%) than the second case, in which mineral dust was present (f355ß=1.2 and f1064ß=1.1in the RH range 68¿%–84¿%). The higher sensitivity of the shortest wavelength to hygroscopic growth was qualitatively reproduced using Mie simulations. In addition, a good agreement was found between the hygroscopic analysis done in the vertical and in time for Case I, where the latter also allowed us to observe the hydration and dehydration of the smoke mixture. Finally, the impact of aerosol hygroscopicity on the Earth's radiative balance has been evaluated using the GAME (Global Atmospheric Model) radiative transfer model. The model showed an impact with an increase in absolute value of 2.4¿W¿m-2 at the surface with respect to the dry conditions for the hygroscopic layer of Case I (smoke mixture)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Considerations about the determination of the depolarization calibration profile of a two-telescope lidar and its implications for volume depolarization ratio retrieval

  • Comerón Tejero, Adolfo
  • Rodríguez Gómez, Alejandro Antonio
  • Sicard, Michaël
  • Barragán Cuesta, Rubén
  • Muñoz Porcar, Constantino
  • Rocadenbosch Burillo, Francisco
  • Granados Muñoz, María José
We propose a new method for calculating the volume depolarization ratio of light backscattered by the atmosphere and a lidar system that employs an auxiliary telescope to detect the depolarized component. It takes into account the possible error in the positioning of the polarizer used in the auxiliary telescope. The theory of operation is presented and then applied to a few cases for which the actual position of the polarizer is estimated, and the improvement of the volume depolarization ratio in the molecular region is quantified. In comparison to the method used before, i.e., without correction, the agreement between the volume depolarization ratio with correction and the theoretical value in the molecular region is improved by a factor of 2–2.5., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Current research in lidar technology used for the remote sensing of atmospheric aerosols

  • Comerón Tejero, Adolfo
  • Muñoz Porcar, Constantino
  • Rocadenbosch Burillo, Francisco
  • Rodríguez Gómez, Alejandro Antonio
  • Sicard, Michaël
Lidars are active optical remote sensing instruments with unique capabilities for atmospheric sounding. A manifold of atmospheric variables can be profiled using different types of lidar: concentration of species, wind speed, temperature, etc. Among them, measurement of the properties of aerosol particles, whose influence in many atmospheric processes is important but is still poorly stated, stands as one of the main fields of application of current lidar systems. This paper presents a review on fundamentals, technology, methodologies and state-of-the art of the lidar systems used to obtain aerosol information. Retrieval of structural (aerosol layers profiling), optical (backscatter and extinction coefficients) and microphysical (size, shape and type) properties requires however different levels of instrumental complexity; this general outlook is structured following a classification that attends these criteria. Thus, elastic systems (detection only of emitted frequencies), Raman systems (detection also of Raman frequency-shifted spectral lines), high spectral resolution lidars, systems with depolarization measurement capabilities and multi-wavelength instruments are described, and the fundamentals in which the retrieval of aerosol parameters is based is in each case detailed., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Profiling of aerosol microphysical properties at several EARLINET/AERONET sites during the July 2012 ChArMEx/EMEP campaign

  • Granados Muñoz, María José
  • Navas Guzmán, Francisco
  • Guerrero Rascado, Juan Luis
  • Bravo Aranda, Juan Antonio
  • Binietoglou, Ioannis
  • Nepomuceno Pereira, Sergio
  • Basart Alpuente, Sara
  • Baldasano Recio, José María
  • Belegante, Livio
  • Chaikovsky, Anatoli
  • Comerón Tejero, Adolfo
  • D'Amico, Giuseppe
  • Muñoz Porcar, Constantino
  • Rodríguez, Alejandro
  • Sicard, Michaël
  • Nickovic, Slobodan
  • Papayannis, Alexander
  • Pappalardo, Gelsomina
  • Wandinger, Ulla
  • Alados Arboledas, Lucas
The simultaneous analysis of aerosol microphysical properties profiles at different European stations is made in the framework of the ChArMEx/EMEP 2012 field campaign (9-11 July 2012). During and in support of this campaign, five lidar ground-based stations (Athens, Barcelona, Bucharest, A parts per thousand vora, and Granada) performed 72aEuro-h of continuous lidar measurements and collocated and coincident sun-photometer measurements. Therefore it was possible to retrieve volume concentration profiles with the Lidar Radiometer Inversion Code (LIRIC). Results indicated the presence of a mineral dust plume affecting the western Mediterranean region (mainly the Granada station), whereas a different aerosol plume was observed over the Balkans area. LIRIC profiles showed a predominance of coarse spheroid particles above Granada, as expected for mineral dust, and an aerosol plume composed mainly of fine and coarse spherical particles above Athens and Bucharest. Due to the exceptional characteristics of the ChArMEx database, the analysis of the microphysical properties profiles' temporal evolution was also possible. An in-depth analysis was performed mainly at the Granada station because of the availability of continuous lidar measurements and frequent AERONET inversion retrievals. The analysis at Granada was of special interest since the station was affected by mineral dust during the complete analyzed period. LIRIC was found to be a very useful tool for performing continuous monitoring of mineral dust, allowing for the analysis of the dynamics of the dust event in the vertical and temporal coordinates. Results obtained here illustrate the importance of having collocated and simultaneous advanced lidar and sun-photometer measurements in order to characterize the aerosol microphysical properties in both the vertical and temporal coordinates at a regional scale. In addition, this study revealed that the use of the depolarization information as input in LIRIC in the stations of Bucharest, A parts per thousand vora, and Granada was crucial for the characterization of the aerosol types and their distribution in the vertical column, whereas in stations lacking depolarization lidar channels, ancillary information was needed. Results obtained were also used for the validation of different mineral dust models. In general, the models better forecast the vertical distribution of the mineral dust than the column-integrated mass concentration, which was underestimated in most of the cases., This work was supported by the Andalusia Regional Government through projects P12-RNM-2409 and P10-RNM-6299, by the Spanish Ministry of Economy and Competitiveness through projects TEC2012-34575, TEC2015-63832-P, CGL2013-45410-R, CGL2011-13580-E/CLI, CGL2011-16124-E, and CGL2013-46736-R; by the Spanish Ministry of Science and Innovation (project UNPC10-4E-442); the EU through the H2020 project ACTRIS2 (contract number 654109); by the University of Granada through the contract “Plan Propio. Programa 9. Convocatoria 2013”; and by the Department of Economy and Knowledge of the Catalan autonomous government (grant 2014 SGR 583). M. J. Granados-Muñoz was funded under grant AP2009-0552 from the Spanish Ministry of Education and Science. S. N. Pereira was funded under fellowship SFRH/BPD/81132/2011 and projects FCOMP-01-0124-FEDER-029212 (PTDC/GEO-MET/4222/2012 from the Portuguese Government). S. Basart and J. M. Baldasano acknowledge the CICYT project (CGL2010-19652 and CGL2013-46736) and Severo Ochoa Programme (SEV-2011-00067) of the Spanish Government. BSC-DREAM8b and NMMB/BSC-Dust simulations were performed on the Mare Nostrum supercomputer hosted by Barcelona Supercomputing Center-Centro Nacional de Supercomputación (BSC-CNS). This paper was realized also as a part of the project III43007 financed by the Ministry of Education and Science of the Republic of Serbia within the framework of integrated and interdisciplinary research for the period 2011–2015. It has also received funding from the European Union’s Seventh Framework Programme for research, technological development, and demonstration under grant agreement no. 289923 – ITaRS. The CIMEL calibration was performed at the AERONET-EUROPE calibration center, supported by ACTRIS-2 (EUH2020 grant agreement no. 654109. The authors express gratitude to the NOAA Air Resources Laboratory for the HYSPLIT transport and dispersion model; the ICARE Data and Services Center the MODIS team; and the ChArMEx project of the MISTRALS (Mediterranean Integrated Studies at Regional And Local Scales; http://www.mistrals-home.org) multidisciplinary research programme., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Modelling of airborne pollen dispersion in the atmosphere in the Catalonia region, Spain: model description, emission scheme and evaluation of model performance for the case of Pinus

  • Sicard, Michaël
  • Jorba Casellas, Oriol
  • Izquierdo Miguel, Rebeca
  • Alarcón Jordán, Marta
  • De Linares, Concepción
  • Belmonte Soler, Jordina
Pollination is a biologically-relevant process that affects the structure of ecosystems since pollen contributes to determine the spatial distribution of plant species. It is thus of interest for mapping ecosystem services for policy support and decision making to increase our knowledge of pollen grain behavior in the atmosphere (source, emission, processes involved during their transport, etc.) at fine temporal and spatial scales. First simulations with the Barcelona Supercomputing Center MONARCH dispersion model of Pinus pollen in the atmosphere were performed during a 5-day pollination event observed in Barcelona, Spain, between 27 – 31 March, 2015. MONARCH is an online atmospheric composition model that solves the life cycle of water vapor, gases and aerosols within a meteorological model. A new aerosol emission scheme for pollen grains has been implemented in the system. The emission scheme considers wind speed at 10 m and friction velocity as main drivers of the mobilization of Pinus pollen grains. The meteorological information is available for the emission scheme at each meteorological integration time step. The spatial distribution of the pine species (P. halepensis, P. pinea) that pollinate from February to April in Catalonia has been derived from the Cartography of habitats of Catalonia and the tree density was obtained from the Forest Inventory of Catalonia. A domain over north-east Spain at 9 km x 9 km horizontal resolution covering Catalonia is designed with 48 vertical layers. The initial meteorological conditions are derived from ERA-5. To evaluate the model performances, the simulations are compared (i) to ground-based concentration measurements performed with a Hirst collector in Barcelona downtown, and (ii) to vertically-resolved measurements performed 4 km west of Barcelona downtown with a Micro Pulse Lidar (MPL). A method based on the lidar polarization capabilities was used to retrieve the contribution of the pollen to the total signal. The conversion from optical lidar-retrieved properties to concentration was optimized by minimizing the sum of the squared deviations between the lidar-retrieved concentration at the first height and the true (Hirst) concentration measured at the ground. In terms of ground-based concentration, the simulations look usually good in the morning and worsen in the afternoon. As far as the vertical distribution of airborne Pinus pollen is concerned, simulations reproduce well the shape of the profiles but the intensity tends to be under estimated. Three major limitations are identified with the model runs: (1) the poorly known phenology emission function, (2) the temporal development of the convective planetary boundary layer, which directly affects the vertical structure of the pollen dispersion; (3) the development of the sea breeze and a proper representation of the sea coast line, that plays a significant role on the skills of the meteorological mesoscale model., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of atmospheric aerosol properties using lidar measurements and their impact on radiative budget in Barcelona over the past 20 years

  • Lolli, Simone
  • Sicard, Michaël
  • Comerón Tejero, Adolfo
  • Gil Díaz, Cristina
  • Oliveira, Daniel Camilo Fortunato dos Santos
  • Landi, Tony C.
  • Rodríguez Gómez, Alejandro Antonio
  • Muñoz Porcar, Constantino
  • Rocadenbosch Burillo, Francisco
  • Dios Otín, Víctor Federico
Aerosols are significant atmospheric constituents that modulate radiation and cloud processes. We evaluated 17-year aerosol profile trends in Barcelona, Spain, from lidar measurements. In summer aerosol reaches 5 km, while in the other seasons it exhibits clear exponential decay. Sahara dust transport affects all seasons, with winter layers above and others penetrating the boundary layer. This study informs the formation of haze and urban preservation strategies in the Mediterranean. The analysis puts in evidence that the averaged net radiative effect is of cooling at both surface level and top of the atmosphere., This work has been made possible through the efforts of many people, whom it would be too long to mention, and the funding of many grants through the years, in particular European projects of different framework programmes (FP5 EARLINET project (ID EVR1-CT-1999-40003), FP6 EARLINET-ASOS (ID: 25991), FP7 ACTRIS (ID: 262254), H2020 ACTRIS-2 (ID: 654109), ACTRIS-PPP (ID: 739530), ACTRIS IMP (ID: 871115) and ATMO-ACCESS (ID: 101008004)), projects of the Spanish National Research Programmes (refs. TIC 431/93, AMB96-1144-C02-01, REN2000-1907-CE, REN2000-1754-C02-02 / CLI, REN2003-09753-C02-C02 / CLI, REN2003-09753-C02-C CGL2008- 01330-E/CLI 02 / CLI, REN2002-12784-E, CGL2005-5131-E, CGL2006-27108-E/CLI, CGL2006-26149-E/CLI, CGL2007-28871-/CLI, CTM2006-27154-E/TECNO, TEC2006-07850/TCM, TEC2009-09106, TEC2012-34575, TEC2015-63832-P and PID2019-103886RB-I00), the project of the Catalan Regional Government IMMPACTE, and the ESA project No. nº 21487/08/NL/HE. The support of the European Union through NextGenerationEU funds is also gratefully acknowledged., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Near-surface and columnar measurements with a micro pulse lidar of atmospheric pollen in Barcelona, Spain

  • Sicard, Michaël
  • Izquierdo Miguel, Rebeca|||0000-0001-5780-4462
  • Alarcón Jordán, Marta
  • Belmonte, Jordina|||0000-0002-6419-9595
  • Comerón, Adolfo
  • Baldasano, José Maria
We present for the first time continuous hourly measurements of pollen near-surface concentration and lidarderived profiles of particle backscatter coefficients and of volume and particle depolarization ratios during a 5-day pollination event observed in Barcelona, Spain, between 27 and 31 March 2015. Daily average concentrations ranged from 1082 to 2830 pollenm¯³. Platanus and Pinus pollen types represented together more than 80%of the total pollen. Maximum hourly pollen concentrations of 4700 and 1200m¯³ were found for Platanus and Pinus, respectively. Every day a clear diurnal cycle caused by the vertical transport of the airborne pollen was visible on the lidar-derived profiles with maxima usually reached between 12:00 and 15:00 UT. A method based on the lidar polarization capabilities was used to retrieve the contribution of the pollen to the total aerosol optical depth (AOD). On average the diurnal (09:00-17:00 UT) pollen AOD was 0.05, which represented 29% of the total AOD. Maximum values of the pollen AOD and its contribution to the total AOD reached 0.12 and 78 %, respectively. The diurnal means of the volume and particle depolarization ratios in the pollen plume were 0.08 and 0.14, with hourly maxima of 0.18 and 0.33, respectively. The diurnal mean of the height of the pollen plume was found at 1.24 km with maxima varying in the range of 1.47-1.78 km. A correlation study is performed (1) between the depolarization ratios and the pollen near-surface concentration to evaluate the ability of the former parameter to monitor pollen release and (2) between the depolarization ratios as well as pollen AOD and surface downward solar fluxes, which cause the atmospheric turbulences responsible for the particle vertical motion, to examine the dependency of the depolarization ratios and the pollen AOD upon solar fluxes. For the volume depolarization ratio the first correlation study yields to correlation coefficients ranging 0.00-0.81 and the second to correlation coefficients ranging 0.49-0.86.