Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Backscatter Error Bounds for the Elastic Lidar Two-Component Inversion Algorithm

  • Rocadenbosch Burillo, Francesc
  • Frasier, Stephen
  • Kumar, Dhiraj
  • Lange, Diego
  • Gregorio López, Eduard
  • Sicard, Michaël
Total backscatter-coefficient inversion error bounds for the two-component lidar inversion algorithm (so-called Fernald's or Klett-Fernald-Sasano's method) are derived in analytical form in response to the following three error sources: 1) the measurement noise; 2) the user uncertainty in the backscatter-coefficient calibration; and 3) the aerosol extinction-to-backscatter ratio. The following two different types of error bounds are presented: 1) approximate error bounds using first-order error propagation and 2) exact error bounds using a total-increment method. Both error bounds are formulated in explicit analytical form, which is of advantage for practical physical sensitivity analysis and computational implementation. A Monte Carlo approach is used to validate the error bounds at 355-, 532-, and 1064-nm wavelengths., This work was supported in part by the European Union through the Aerosols, Clouds, and Trace Gases Research Infrastructure Network (ACTRIS) Project under Contract 262254, the European Space Agency under Contract 21487/08/NL/HE, and the Spanish Ministry of Science and Innovation (MICINN) and European Regional Development (FEDER) Funds under Grant TEC2009-09106 and through the Chemistry–Aerosol Mediterranean Experiment (ChArMEx) Project under Complementary Actions/Grants CGL2011-13580-E/CLI and CGL2008-01330-E/CLI. The work of D. Kumar and D. Lange was supported by the Generalitat de Catalunya/Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) and Spanish Ministry of Foreign Affairs and Cooperation (MAEC-AECID), respectively, through their pre-Ph.D. fellowships.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Direct, longwave radiative forcing of mineral dust: improvement of its estimation by means of tools recently developed by the EARLINET community

  • Sicard, Michaël|||0000-0001-8287-9693
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Barragán Cuesta, Rubén
The objective of this work is to investigate how the knowledge of the vertically-resolved fine and coarse mode aerosol optical depth modifies the longwave radiative forcing. Since relatively little the EARLINET (European Aerosol Research Lidar Network) community has developed codes that combine sun-photometer and lidar data to retrieve a set of parameters vertically-resolved related to the size distribution (fine and coarse mode extinction coefficients, fine and coarse mode volumetric concentrations, etc.). We concentrate on the case of mineral dust whose size distribution is often dominated by the coarse mode. This work demonstrates that the knowledge of the vertically-resolved fine and coarse mode aerosol optical depth modifies the LW RF as compared to the classical approach with a unique profile of total aerosol optical depth. The results show that when the coarse mode predominates the classical approach underestimates the dust longwave radiative forcing by 10 to 20 % at the surface. The effect at the top of the atmosphere is not systematic because of the predominance of fine particles near the top of the dust layer., This work is supported by the 7th Framework Programme project Aerosols, Clouds, and Trace Gases Research Infrastructure Network (ACTRIS) (grant agreement no. 262254). Lidar measurements in Barcelona are supported by the Spanish Ministry of Science and Innovation and FEDER funds under the projects TEC2012-34575, UNPC10-4E-442, CGL2011-13580-E/CLI and CGL2011-16124-E/CLI., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Profiling of aerosol microphysical properties at several EARLINET/AERONET sites during the July 2012 ChArMEx/EMEP campaign

  • Granados Muñoz, María José
  • Navas Guzmán, Francisco
  • Guerrero Rascado, Juan Luis
  • Bravo Aranda, Juan Antonio
  • Binietoglou, Ioannis
  • Nepomuceno Pereira, Sergio
  • Basart Alpuente, Sara
  • Baldasano Recio, José María|||0000-0002-6191-635X
  • Belegante, Livio
  • Chaikovsky, Anatoli
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • D'Amico, Giuseppe
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rodríguez, Alejandro
  • Sicard, Michaël|||0000-0001-8287-9693
  • Nickovic, Slobodan
  • Papayannis, Alexander
  • Pappalardo, Gelsomina
  • Wandinger, Ulla
  • Alados Arboledas, Lucas
The simultaneous analysis of aerosol microphysical properties profiles at different European stations is made in the framework of the ChArMEx/EMEP 2012 field campaign (9-11 July 2012). During and in support of this campaign, five lidar ground-based stations (Athens, Barcelona, Bucharest, A parts per thousand vora, and Granada) performed 72aEuro-h of continuous lidar measurements and collocated and coincident sun-photometer measurements. Therefore it was possible to retrieve volume concentration profiles with the Lidar Radiometer Inversion Code (LIRIC). Results indicated the presence of a mineral dust plume affecting the western Mediterranean region (mainly the Granada station), whereas a different aerosol plume was observed over the Balkans area. LIRIC profiles showed a predominance of coarse spheroid particles above Granada, as expected for mineral dust, and an aerosol plume composed mainly of fine and coarse spherical particles above Athens and Bucharest. Due to the exceptional characteristics of the ChArMEx database, the analysis of the microphysical properties profiles' temporal evolution was also possible. An in-depth analysis was performed mainly at the Granada station because of the availability of continuous lidar measurements and frequent AERONET inversion retrievals. The analysis at Granada was of special interest since the station was affected by mineral dust during the complete analyzed period. LIRIC was found to be a very useful tool for performing continuous monitoring of mineral dust, allowing for the analysis of the dynamics of the dust event in the vertical and temporal coordinates. Results obtained here illustrate the importance of having collocated and simultaneous advanced lidar and sun-photometer measurements in order to characterize the aerosol microphysical properties in both the vertical and temporal coordinates at a regional scale. In addition, this study revealed that the use of the depolarization information as input in LIRIC in the stations of Bucharest, A parts per thousand vora, and Granada was crucial for the characterization of the aerosol types and their distribution in the vertical column, whereas in stations lacking depolarization lidar channels, ancillary information was needed. Results obtained were also used for the validation of different mineral dust models. In general, the models better forecast the vertical distribution of the mineral dust than the column-integrated mass concentration, which was underestimated in most of the cases., This work was supported by the Andalusia Regional Government through projects P12-RNM-2409 and P10-RNM-6299, by the Spanish Ministry of Economy and Competitiveness through projects TEC2012-34575, TEC2015-63832-P, CGL2013-45410-R, CGL2011-13580-E/CLI, CGL2011-16124-E, and CGL2013-46736-R; by the Spanish Ministry of Science and Innovation (project UNPC10-4E-442); the EU through the H2020 project ACTRIS2 (contract number 654109); by the University of Granada through the contract “Plan Propio. Programa 9. Convocatoria 2013”; and by the Department of Economy and Knowledge of the Catalan autonomous government (grant 2014 SGR 583). M. J. Granados-Muñoz was funded under grant AP2009-0552 from the Spanish Ministry of Education and Science. S. N. Pereira was funded under fellowship SFRH/BPD/81132/2011 and projects FCOMP-01-0124-FEDER-029212 (PTDC/GEO-MET/4222/2012 from the Portuguese Government). S. Basart and J. M. Baldasano acknowledge the CICYT project (CGL2010-19652 and CGL2013-46736) and Severo Ochoa Programme (SEV-2011-00067) of the Spanish Government. BSC-DREAM8b and NMMB/BSC-Dust simulations were performed on the Mare Nostrum supercomputer hosted by Barcelona Supercomputing Center-Centro Nacional de Supercomputación (BSC-CNS). This paper was realized also as a part of the project III43007 financed by the Ministry of Education and Science of the Republic of Serbia within the framework of integrated and interdisciplinary research for the period 2011–2015. It has also received funding from the European Union’s Seventh Framework Programme for research, technological development, and demonstration under grant agreement no. 289923 – ITaRS. The CIMEL calibration was performed at the AERONET-EUROPE calibration center, supported by ACTRIS-2 (EUH2020 grant agreement no. 654109. The authors express gratitude to the NOAA Air Resources Laboratory for the HYSPLIT transport and dispersion model; the ICARE Data and Services Center the MODIS team; and the ChArMEx project of the MISTRALS (Mediterranean Integrated Studies at Regional And Local Scales; http://www.mistrals-home.org) multidisciplinary research programme., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Direct, longwave radiative forcing of mineral dust: improvement of its estimation by means of tools recently developed by the EARLINET community

  • Sicard, Michaël
  • Muñoz Porcar, Constantino
  • Comerón Tejero, Adolfo
  • Rodríguez Gómez, Alejandro Antonio
  • Rocadenbosch Burillo, Francisco
  • Barragán Cuesta, Rubén
The objective of this work is to investigate how the knowledge of the vertically-resolved fine and coarse mode aerosol optical depth modifies the longwave radiative forcing. Since relatively little the EARLINET (European Aerosol Research Lidar Network) community has developed codes that combine sun-photometer and lidar data to retrieve a set of parameters vertically-resolved related to the size distribution (fine and coarse mode extinction coefficients, fine and coarse mode volumetric concentrations, etc.). We concentrate on the case of mineral dust whose size distribution is often dominated by the coarse mode. This work demonstrates that the knowledge of the vertically-resolved fine and coarse mode aerosol optical depth modifies the LW RF as compared to the classical approach with a unique profile of total aerosol optical depth. The results show that when the coarse mode predominates the classical approach underestimates the dust longwave radiative forcing by 10 to 20 % at the surface. The effect at the top of the atmosphere is not systematic because of the predominance of fine particles near the top of the dust layer., This work is supported by the 7th Framework Programme project Aerosols, Clouds, and Trace Gases Research Infrastructure Network (ACTRIS) (grant agreement no. 262254). Lidar measurements in Barcelona are supported by the Spanish Ministry of Science and Innovation and FEDER funds under the projects TEC2012-34575, UNPC10-4E-442, CGL2011-13580-E/CLI and CGL2011-16124-E/CLI., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Backscatter Error Bounds for the Elastic Lidar Two-Component Inversion Algorithm

  • Rocadenbosch Burillo, Francesc
  • Frasier, Stephen
  • Kumar, Dhiraj
  • Lange, Diego
  • Gregorio López, Eduard
  • Sicard, Michaël
Total backscatter-coefficient inversion error bounds for the two-component lidar inversion algorithm (so-called Fernald's or Klett-Fernald-Sasano's method) are derived in analytical form in response to the following three error sources: 1) the measurement noise; 2) the user uncertainty in the backscatter-coefficient calibration; and 3) the aerosol extinction-to-backscatter ratio. The following two different types of error bounds are presented: 1) approximate error bounds using first-order error propagation and 2) exact error bounds using a total-increment method. Both error bounds are formulated in explicit analytical form, which is of advantage for practical physical sensitivity analysis and computational implementation. A Monte Carlo approach is used to validate the error bounds at 355-, 532-, and 1064-nm wavelengths., This work was supported in part by the European Union through the Aerosols, Clouds, and Trace Gases Research Infrastructure Network (ACTRIS) Project under Contract 262254, the European Space Agency under Contract 21487/08/NL/HE, and the Spanish Ministry of Science and Innovation (MICINN) and European Regional Development (FEDER) Funds under Grant TEC2009-09106 and through the Chemistry–Aerosol Mediterranean Experiment (ChArMEx) Project under Complementary Actions/Grants CGL2011-13580-E/CLI and CGL2008-01330-E/CLI. The work of D. Kumar and D. Lange was supported by the Generalitat de Catalunya/Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) and Spanish Ministry of Foreign Affairs and Cooperation (MAEC-AECID), respectively, through their pre-Ph.D. fellowships.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Profiling of aerosol microphysical properties at several EARLINET/AERONET sites during the July 2012 ChArMEx/EMEP campaign

  • Granados Muñoz, María José
  • Navas Guzmán, Francisco
  • Guerrero Rascado, Juan Luis
  • Bravo Aranda, Juan Antonio
  • Binietoglou, Ioannis
  • Nepomuceno Pereira, Sergio
  • Basart Alpuente, Sara
  • Baldasano Recio, José María
  • Belegante, Livio
  • Chaikovsky, Anatoli
  • Comerón Tejero, Adolfo
  • D'Amico, Giuseppe
  • Muñoz Porcar, Constantino
  • Rodríguez, Alejandro
  • Sicard, Michaël
  • Nickovic, Slobodan
  • Papayannis, Alexander
  • Pappalardo, Gelsomina
  • Wandinger, Ulla
  • Alados Arboledas, Lucas
The simultaneous analysis of aerosol microphysical properties profiles at different European stations is made in the framework of the ChArMEx/EMEP 2012 field campaign (9-11 July 2012). During and in support of this campaign, five lidar ground-based stations (Athens, Barcelona, Bucharest, A parts per thousand vora, and Granada) performed 72aEuro-h of continuous lidar measurements and collocated and coincident sun-photometer measurements. Therefore it was possible to retrieve volume concentration profiles with the Lidar Radiometer Inversion Code (LIRIC). Results indicated the presence of a mineral dust plume affecting the western Mediterranean region (mainly the Granada station), whereas a different aerosol plume was observed over the Balkans area. LIRIC profiles showed a predominance of coarse spheroid particles above Granada, as expected for mineral dust, and an aerosol plume composed mainly of fine and coarse spherical particles above Athens and Bucharest. Due to the exceptional characteristics of the ChArMEx database, the analysis of the microphysical properties profiles' temporal evolution was also possible. An in-depth analysis was performed mainly at the Granada station because of the availability of continuous lidar measurements and frequent AERONET inversion retrievals. The analysis at Granada was of special interest since the station was affected by mineral dust during the complete analyzed period. LIRIC was found to be a very useful tool for performing continuous monitoring of mineral dust, allowing for the analysis of the dynamics of the dust event in the vertical and temporal coordinates. Results obtained here illustrate the importance of having collocated and simultaneous advanced lidar and sun-photometer measurements in order to characterize the aerosol microphysical properties in both the vertical and temporal coordinates at a regional scale. In addition, this study revealed that the use of the depolarization information as input in LIRIC in the stations of Bucharest, A parts per thousand vora, and Granada was crucial for the characterization of the aerosol types and their distribution in the vertical column, whereas in stations lacking depolarization lidar channels, ancillary information was needed. Results obtained were also used for the validation of different mineral dust models. In general, the models better forecast the vertical distribution of the mineral dust than the column-integrated mass concentration, which was underestimated in most of the cases., This work was supported by the Andalusia Regional Government through projects P12-RNM-2409 and P10-RNM-6299, by the Spanish Ministry of Economy and Competitiveness through projects TEC2012-34575, TEC2015-63832-P, CGL2013-45410-R, CGL2011-13580-E/CLI, CGL2011-16124-E, and CGL2013-46736-R; by the Spanish Ministry of Science and Innovation (project UNPC10-4E-442); the EU through the H2020 project ACTRIS2 (contract number 654109); by the University of Granada through the contract “Plan Propio. Programa 9. Convocatoria 2013”; and by the Department of Economy and Knowledge of the Catalan autonomous government (grant 2014 SGR 583). M. J. Granados-Muñoz was funded under grant AP2009-0552 from the Spanish Ministry of Education and Science. S. N. Pereira was funded under fellowship SFRH/BPD/81132/2011 and projects FCOMP-01-0124-FEDER-029212 (PTDC/GEO-MET/4222/2012 from the Portuguese Government). S. Basart and J. M. Baldasano acknowledge the CICYT project (CGL2010-19652 and CGL2013-46736) and Severo Ochoa Programme (SEV-2011-00067) of the Spanish Government. BSC-DREAM8b and NMMB/BSC-Dust simulations were performed on the Mare Nostrum supercomputer hosted by Barcelona Supercomputing Center-Centro Nacional de Supercomputación (BSC-CNS). This paper was realized also as a part of the project III43007 financed by the Ministry of Education and Science of the Republic of Serbia within the framework of integrated and interdisciplinary research for the period 2011–2015. It has also received funding from the European Union’s Seventh Framework Programme for research, technological development, and demonstration under grant agreement no. 289923 – ITaRS. The CIMEL calibration was performed at the AERONET-EUROPE calibration center, supported by ACTRIS-2 (EUH2020 grant agreement no. 654109. The authors express gratitude to the NOAA Air Resources Laboratory for the HYSPLIT transport and dispersion model; the ICARE Data and Services Center the MODIS team; and the ChArMEx project of the MISTRALS (Mediterranean Integrated Studies at Regional And Local Scales; http://www.mistrals-home.org) multidisciplinary research programme., Peer Reviewed, Postprint (published version)