Pasar al contenido principal

TELEDETECCION ATMOSFERICA MEDIANTE SENSORES COOPERATIVOS LIDAR, RADAR Y PASIVOS: APLICACIONES SOBRE TIERRA Y MAR PARA LA OBSERVACION ATMOSFERICA Y ENERGIA EOLICA OFF-SHORE

PGC2018-094132-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application and Testing of the Extended-Kalman-Filtering Technique for Determining the Planetary Boundary-Layer Height over Athens, Greece

  • Kokkalis, Panagiotis
  • Alexiou, Dimitrios
  • Papayannis, Alexandros D.
  • Rocadenbosch, Francesc
  • Soupiona, Ourania
  • Raptis, Ioannis Panagiotis
  • Mylonaki, Maria
  • Tzanis, C.
  • Christodoulakis, John K.
We investigate the temporal evolution of the planetary boundary-layer (PBL) height over the basin of Athens, Greece, during a 6-year period (2011–2016), using data from a Raman lidar system. The range-corrected lidar signals are selected around local noon (1200 UTC) and midnight (0000 UTC), for a total of 332 cases: 165 days and 167 nights. In this dataset, the extended-Kalman filtering technique is applied and tested for the determination of the PBL height. Several well-established techniques for the PBL height estimation based on lidar data are also tested for a total of 35 cases. The lidar-derived PBL heights are compared to those derived from radiosonde data. The mean PBL height over Athens is found to be 1617 ± 324 m at 1200 UTC and 892 ± 130 m at 0000 UTC for the period examined, while the mean PBL-height growth rate is found to be 170 ± 64 m h and 90 ± 17 m h during daytime and night-time, respectively., The research leading to these results has received additional funding from the European Union 7th Framework Program (FP7/2011-2015) and Horizon 2020/2015-2021 Research and Innovation program (ACTRIS) under grant agreements nos 262254, 654109, and 739530, as well as from Spanish National Science Foundation and FEDER funds PGC2018-094132-B-I00. CommSensLab-UPC is a María-de-Maeztu Excellence Unit, MDM-2016-0600, funded by the Agencia Estatal de Investigación, Spain
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing Obukhov length and friction velocity from floating lidar observations: A data screening and sensitivity computation approach

  • Araújo da Silva, Marcos P.
  • Rocadenbosch, Francesc
  • Farré-Guarné, Joan
  • Salcedo-Bosch, Andreu
  • González-Marco, Daniel
  • Peña, Alfredo
This article belongs to the Topic High-Resolution Earth Observation Systems, Technologies, and Applications., This work presents a parametric-solver algorithm for estimating atmospheric stability and friction velocity from floating Doppler wind lidar (FDWL) observations close to the mast of IJmuiden in the North Sea. The focus of the study was two-fold: (i) to examine the sensitivity of the computational algorithm to the retrieved variables and derived stability classes (the latter through confusion-matrix theory), and (ii) to present data screening procedures for FDWLs and fixed reference instrumentation. The performance of the stability estimation algorithm was assessed with reference to wind speed and temperature observations from the mast. A fixed-to-mast Doppler wind lidar (DWL) was also available, which provides a reference for wind-speed observations free from sea-motion perturbations. When comparing FDWL- and mast-derived mean wind speeds, the obtained determination coefficient was as high as that of the fixed-to-mast DWL against the mast (ρ2=0.996) with a root mean square error (RMSE) of 0.25 m/s. From the 82-day measurement campaign at IJmuiden (10,833 10 min records), the parametric algorithm showed that the atmosphere was neutral (31% of the cases), stable (28%), or near-neutral stable (19%) during most of the campaign. These figures satisfactorily agree with values estimated from the mast measurements (31%, 27%, and 19%, respectively)., This research was part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (CommSensLab Excellence Unit) funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER. The work of M.P.A.S was supported under grant PRE2018-086054 funded by MCIN/AEU/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A.S-B was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced dual filter for floating wind lidar motion correction: The impact of wind and initial scan phase models

  • Salcedo-Bosch, Andreu
  • Rocadenbosch, Francesc
  • Sospedra, Joaquim
This article belongs to the Section Atmospheric Remote Sensing., An enhanced filter for floating Doppler wind lidar motion correction is presented. The filter relies on an unscented Kalman filter prototype for floating-lidar motion correction without access to the internal line-of-sight measurements of the lidar. In the present work, we implement a new architecture based on two cooperative estimation filters and study the impact of different wind and initial scan phase models on the filter performance in the coastal environment of Barcelona. Two model combinations are considered: (i) a basic random walk model for both the wind turbulence and the initial scan phase and (ii) an auto-regressive model for wind turbulence along with a uniform circular motion model for the scan phase. The filter motion-correction performance using each of the above models was evaluated with reference to a fixed lidar in different wind and motion scenarios (low- and high-frequency turbulence cases) recorded during a 25-day campaign at “Pont del Petroli”, Barcelona, by clustered statistical analysis. The auto-regressive wind model and the uniform circular motion phase model permitted the filter to overcome divergence in all wind and motion scenarios. The statistical indicators comparing both instruments showed overall improvement. The mean deviation increased from 1.62% (without motion correction) to −0.07% (with motion correction), while the root-mean-square error decreased from 1.87% to 0.58%, and the determination coefficient (R2 ) improved from 0.90 to 0.96., This research project was part of projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A Robust Adaptive Unscented Kalman Filter for floating Doppler Wind-LiDAR motion correction

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
This study presents a new method for correcting the six degrees of freedom motion-induced error in ZephIR 300 floating Doppler Wind-LiDAR-derived data, based on a Robust Adaptive Unscented Kalman Filter. The filter takes advantage of the known floating Doppler Wind-LiDAR (FDWL) dynamics, a velocity–azimuth display algorithm, and a wind model describing the LiDAR-retrieved wind vector without motion influence. The filter estimates the corrected wind vector by adapting itself to different atmospheric and motion scenarios, and by estimating the covariance matrices of related noise processes. The measured turbulence intensity by the FDWL (with and without correction) was compared against a reference fixed LiDAR over a 25-day period at “El Pont del Petroli”, Barcelona. After correction, the apparent motion-induced turbulence was greatly reduced, and the statistical indicators showed overall improvement. Thus, the Mean Difference improved from -1.70% (uncorrected) to 0.36% (corrected), the Root Mean Square Error (RMSE) improved from 2.01% to 0.86%, and coefficient of determination improved from 0.85 to 0.93., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“Comm- SensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Floating Doppler Wind Lidar measurement of wind turbulence: a cluster analysis

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Tiana Alsina, Jordi|||0000-0001-8359-9378
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
The standard deviation of the Horizontal Wind Speed as a proxy of wind turbulence is used to compare the apparent wind turbulence measured by an off-shore floating Doppler lidar to the one measured by a fixed lidar on a metmast. We use statistical analysis based on clustering the horizontal wind speed measured by the floating lidar as well as buoy angular amplitude and period under the approximation of harmonic motion. Three scenarios with different wave and wind conditions are discussed from the IJmuiden's test campaign (North Sea.)., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Atmospheric boundary layer height disambiguation using synergistic remote sensing observations: case examples from VORTEX-SE

  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Tanamachi, Robin
  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Villalonga, Joan
  • Frasier, Stephen J.
  • Turner, David Dave
Synergistic remote sensing of the atmosphere, combined with adaptive techniques, offers unprecedented opportunities to characterise the evolution of key atmospheric features such as the Atmospheric Boundary Layer (ABL). Using long-duration, high-resolution, profiling observations from active and passive ground-based remote sensing systems during the Verification of the Origins of Rotation in Tornadoes Experiment{Southeast (VORTEX-SE) 2017 field campaign, an attempt is made to characterise ABL development over distinct regions that are well known for their relatively high tornado frequency. In this study, observing systems include an S-band radar, Vaisala CL-31 ceilometer, Doppler Wind lidar (DWL) and radiometric observations from the Collaborative Lower Atmosphere Mobile Profiling System (CLAMPS). In this work, ABL height (ABLH) tracking over the diurnal cycle, and - up to a point - its disambiguation over selected non-precipitating case examples, are attempted. Different observational sets are used, namely, radar reflectivity observations assimilated into a Kalman filter, DWL profiles of the vertical velocity, and virtual potential temperature profiles, as well as radiosoundings and cloudbase reference information collected during Intensive Observation Periods (IOP) carried out in VORTEX-SE, Alabama during 2017. Limitations and advantages of each system are discussed., This work was supported by NOAA grants NA1501R4590232 and NA16OAR4590209, and by the Purdue University Dept. of Earth, Atmospheric, and Planetary Sciences (EAPS). CommSensLab-UPC (Excellence UnitMDM-2016-0600 funded by the Agencia Estatal de Investigación, Spain) collaborated via Spanish Gov.– EURegional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-PPP project GA-739530. The Spanish National Science Foundation (Ministerio de Ciencia, Innovación y Universidades) funded doctoral grant PRE2018-086054 hold by M.P. Araujo da Silva., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Synergistic mixed-layer height retrieval method using microwave radiometer and lidar ceilometer observations

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Tanamachi, Robin
  • Saeed, Umar|||0000-0003-0261-2767
This paper tackles synergistic mixed-layer height (MLH) estimation via a combination of microwave radiometer (MWR) and lidar ceilometer (LC)-based estimates. While MLH-MWR estimates rely on potential temperature retrievals, MLH-LC estimates rely on aerosol gradients. The pros and cons of MLH retrievals obtained from MWR via the parcel method and from LC via an extended Kalman filter (EKF)-based method are used to motivate the synergistic algorithm. The synergistic algorithm is introduced as a maximum-likelihood combination of MLH-MWR and MLH-LC. Two case examples from the 2013 HOPE campaign at Jülich, Germany, are used to show the robustness of the synergistic method and the effect of surface temperature measurement error. Doppler wind lidar retrievals and radiosonde reference MLH estimates are used for validation., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER. Data were provided by Julich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of M.P.A.S was supported under Grant PRE2018-086054 funded by MCIN/AEI/ 10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical solver for vertical air motion estimation

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Domínguez Pla, Paula
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Frasier, Stephen J.
We present preliminary research on a method to estimate Vertical Air Motion (VAM) at a particular height by comparing the measured rain-rate (RR) by a vertically-pointing S-band Frequency-Modulated Continuous-Wave (FMCW) radar with that of a ground-based disdrometer. The method is based on a constrained parametric solver, assuming high correlation between 5-min averaged rain rates measured by the radar and disdrometer. The method is tested over disdrometer and radar observations during the Verification of the ORigins Tornado EXperiment in South East US (VORTEX-SE) project. Finally, the results are partially validated by means of fitting a gamma distribution to the VAM-corrected DSD profiles and studying its parameters., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMOACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing Obukhov length and friction velocity from floating lidar observations: A data screening and sensitivity computation approach

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • González Marco, Daniel|||0000-0002-9619-1897
  • Peña Diaz, Alfredo
This work presents a parametric-solver algorithm for estimating atmospheric stability and friction velocity from floating Doppler wind lidar (FDWL) observations close to the mast of IJmuiden in the North Sea. The focus of the study was two-fold: (i) to examine the sensitivity of the computational algorithm to the retrieved variables and derived stability classes (the latter through confusion-matrix theory), and (ii) to present data screening procedures for FDWLs and fixed reference instrumentation. The performance of the stability estimation algorithm was assessed with reference to wind speed and temperature observations from the mast. A fixed-to-mast Doppler wind lidar (DWL) was also available, which provides a reference for wind-speed observations free from sea-motion perturbations. When comparing FDWL- and mast-derived mean wind speeds, the obtained determination coefficient was as high as that of the fixed-to-mast DWL against the mast (ρ2=0.996) with a root mean square error (RMSE) of 0.25 m/s. From the 82-day measurement campaign at IJmuiden (10,833 10 min records), the parametric algorithm showed that the atmosphere was neutral (31% of the cases), stable (28%), or near-neutral stable (19%) during most of the campaign. These figures satisfactorily agree with values estimated from the mast measurements (31%, 27%, and 19%, respectively)., This research was part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (Comm- SensLab Excellence Unit) funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER. The work of M.P.A.S was supported under grant PRE2018-086054 funded by MCIN/AEU/10.13039/501100011033 and FSE “El FSE in- vierte en tu futuro”. The work of A.S-B was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ceilometer-based rain-rate estimation: A case-study comparison with S-band radar and disdrometer retrievals in the context of VORTEX-SE

  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Barragán Cuesta, Rubén
  • Frasier, Stephen J.
  • Waldinger, Joseph
  • Turner, David Dave
  • Tanamachi, Robin
  • Dawson, Daniel
Attenuated backscatter measurements from a Vaisala CL31 ceilometer and a modified form of the well-known slope method are used to derive the ceilometer extinction profiles during rain events, restricted to rainfall rates (RRs) below approximately 10 mm/h. RR estimates from collocated S-band radar and portable disdrometer are used to derive the RR-to-extinction correlation models for the ceilometer-radar and ceilometer-disdrometer combinations. Data were collected during an intensive observation period of the Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) conducted in northern Alabama. These models are used to estimate the RR from the ceilometer observations in similar situations that do not have collocated radar or the disdrometer. Such correlation models are, however, limited by the different temporal and spatial resolutions of the measured variables, measurement capabilities of the instruments, and the inherent assumption of a homogeneous atmosphere. An empirical method based on extinction and RR uncertainty scoring and covariance fitting are proposed to solve, in part, these limitations., This work was supported by the National Oceanic and Atmospheric Administration (NOAA) under Grant NA1501R4590232 and Grant NA16OAR4590209 and by the Department of Earth, Atmospheric, and Planetary Sciences, Purdue University. CommSensLab-Universitat Politècnica de Catalunya (UPC) (which is a María de Maeztu Excellence Unit funded by the Agencia Estatal de Investigación, Spain; MDM-2016-0600) collaborated via Spanish Government - European Regional Development Funds under PGC2018-094132-B-I00 and TEC2015- 63832-P projects, and via European Union (funds) (EU) Funds under Grant H2020 ACTRIS-2 (GA-654109) and Grant ACTRIS-PPP (GA-739530). The work of Rubén Barragán was supported by the Spanish Ministry of Science, Innovation and Universities under Grant BES-2013-066340., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Floating lidar assessment of atmospheric stability in the North Sea

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • González Marco, Daniel|||0000-0002-9619-1897
  • Peña Diaz, Alfredo
In this work, the 2D parametric-solver algorithm [1] used to assess atmospheric stability from floating Doppler wind lidar (FDWL) measurements is revisited. The algorithm performance is studied using data from IJmuiden campaign. Mast-measured temperature and wind-speed provided the reference parameters used to evaluate the performance of the stability estimation algorithm. From 5,922 10-min samples available, the algorithm classified the atmosphere as stable (52% of the cases), neutral (31%) and unstable (17%), which successfully agreed with the mast-derived reference classification (53%, 30% and 17%, respectively)., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Estimation of wave period from pitch and roll of a lidar buoy

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Tiana Alsina, Jordi|||0000-0001-8359-9378
This work proposes a new wave-period estimation (L-dB) method based on the power-spectral-density (PSD) estimation of pitch and roll motional time series of a Doppler wind lidar buoy under the assumption of small angles (±22 deg) and slow yaw drifts (1 min), and the neglection of translational motion. We revisit the buoy’s simplified two-degrees-of-freedom (2-DoF) motional model and formulate the PSD associated with the eigenaxis tilt of the lidar buoy, which was modelled as a complex-number random process. From this, we present the L-dB method, which estimates the wave period as the average wavelength associated to the cutoff frequency span at which the spectral components drop off L decibels from the peak level. In the framework of the IJmuiden campaign (North Sea, 29 March–17 June 2015), the L-dB method is compared in reference to most common oceanographic wave-period estimation methods by using a TriaxysTM buoy. Parametric analysis showed good agreement (correlation coefficient, ρ = 0.86, root-mean-square error (RMSE) = 0.46 s, and mean difference, MD = 0.02 s) between the proposed L-dB method and the oceanographic zero-crossing method when the threshold L was set at 8 dB., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-IMP project GA-871115. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigación, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Variance processing for stable boundary-layer height estimation using backscatter lidar data: A discussion

  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Saeed, Umar|||0000-0003-0261-2767
  • Rey Micolau, Francesc|||0000-0003-3615-7627
  • Pay Pérez, M. Teresa
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
In this paper we present a method for estimating the height of the nocturnal stable boundary layer by using lidar measurements and a single radiosonde for unambiguous initial guess. The method relies on the correlation between aerosol stratifications in the stable boundary layer and minimum variance levels in the attenuated backscatter profile. The method is based on calculating either temporal or spatial variance vertical profiles of the attenuated backscatter and threshold-limited decision. A radiosonde temperature-based estimation is used to provide an initial guess if several minimum variance regions are detected. Two study cases using ceilometer data are shown. Comparison with temperature-based estimations from a collocated microwave radiometer have been used for validation. The method can be useful for estimating the stable boundary layer height in sites with a ceilometer but without any available temperature profiler., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-IMP (GA 871115). CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigación, Spain. The work of M.P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhanced dual filter for floating wind lidar motion correction: The impact of wind and initial scan phase models

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
An enhanced filter for floating Doppler wind lidar motion correction is presented. The filter relies on an unscented Kalman filter prototype for floating-lidar motion correction without access to the internal line-of-sight measurements of the lidar. In the present work, we implement a new architecture based on two cooperative estimation filters and study the impact of different wind and initial scan phase models on the filter performance in the coastal environment of Barcelona. Two model combinations are considered: (i) a basic random walk model for both the wind turbulence and the initial scan phase and (ii) an auto-regressive model for wind turbulence along with a uniform circular motion model for the scan phase. The filter motion-correction performance using each of the above models was evaluated with reference to a fixed lidar in different wind and motion scenarios (low- and high-frequency turbulence cases) recorded during a 25-day campaign at “Pont del Petroli”, Barcelona, by clustered statistical analysis. The auto-regressive wind model and the uniform circular motion phase model permitted the filter to overcome divergence in all wind and motion scenarios. The statistical indicators comparing both instruments showed overall improvement. The mean deviation increased from 1.62% (without motion correction) to -0.07% (with motion correction), while the root-mean-square error decreased from 1.87% to 0.58%, and the determination coefficient (R2) improved from 0.90 to 0.96., This research project was part of projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Convective boundary-layer height estimation from combined radar and Doppler lidar observations in VORTEX-SE

  • Villalonga, Joan
  • Beveridge, Susan L.
  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Tanamachi, Robin
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Turner, David Dave
  • Frasier, Stephen J.
The Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) provides a wealth of long-duration, high-resolution, vertically pointing observations from active and passive ground-based remote sensing systems enabling characterization of the Atmospheric Boundary Layer (ABL) development over distinct regions that are well known for their relatively high tornado frequency. Application of the Extended Kalman Filter (EKF) to BL height estimation in the convective regime (CBLH) of the diurnal cycle from S-band radar reflectivity observations1 has shown to yield accurate results under simple CBL conditions. In this work, we revisit the radar-EKF technique and investigate its main limitations. For example, during daytime clear-sky conditions such as those prevailing in the BL morning transition, weak turbulence leads to very low reflectivity returns, limiting application of this technique. Additionally, turbulent mixing layers capped with a residual layer, and/or multi-layer scenarios can lead the filter to lose track of the BL signature over time. Doppler Wind Lidar (DWL) observations of the vertical wind velocity variance2 provide complementary CBLH estimates to those of the radar-EKF combination, providing potential to disambiguate more complex convective cases. DWL estimates are, however, strongly influenced by the variance threshold selected. The complementarity of radar and DWL for CBLH estimation is studied in reference to radiosoundings., This work was supported by NOAA grants NA1501R4590232 and NA16OAR4590209, and by the Purdue University Dept. of Earth, Atmospheric, and Planetary Sciences (EAPS). CommSensLab-UPC (Excellence Unit MDM-2016-0600 funded by the Agencia Estatal de Investigación, Spain) collaborated via Spanish Gov.- EU Regional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-PPP project GA-739530. The Spanish National Science Foundation (Ministerio de Ciencia, Innovación y Universidades) funded doctoral grant PRE2018-086054 hold by M.P. Araujo da Silva., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On adaptive unscented Kalman filtering for floating Doppler wind-lidar motion correction: Effect of the number of lidar measurement heights

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
This work studies the influence of the number of lidar measurement heights on the performance of the floating Doppler wind lidar motion-correction algorithm, recently published by the authors. The work is in the context of offshore wind energy and continuous-wave focusable ZephirTM 300 lidar. A downsampling technique applied over the lidar-measured wind speed time-series is used to simulate different height-sounding configurations. The operation of the filter under one, three, and five measurement heights of the lidar is studied by using data from El Pont del Petroli measurement campaign. The filter is proved to remove apparent turbulence addition in all three cases, showing a deterioration of statistical indicators as the number of sounding heights increase., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00, H2020 ACTRIS-IMP project GA-871115 and H2020 ATMO-ACCESS project GA101008004. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Offshore Doppler Wind LiDAR assessment of atmospheric stability

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This paper tackles atmospheric stability typing using a Zephyr™ 300 offshore Doppler Wind Lidar in the context of its progressive acceptance in the offshore wind-energy industry. The lidar-retrieved wind-shear exponent, which is used as a proxy atmospheric stability, is compared against the wind-shear exponent and the potential temperature gradient both retrieved from reference metmast. A total sample of 4319 measurements is analysed from IJmuiden's test campaign, in the North Sea, from April 1 st to 30 th, 2015. Concerning stability typing, both lidar- and metmast-derived wind-shear indicators overestimated by 4% and 14%, respectively, the most frequent atmospheric stability case, which was convective (48% of the cases) according to the potential temperature reference indicator., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation) that also funded the project MDM-2016-0600-18-1. Spanish NSF (Ministry of Science, Innovation and Universities; Ministerio de Ciencia, Innovacion y Universidades) for doctoral grant PRE2018-086054 hold by Ph.D. student Araujo da Silva M.P. at CommSensLab-UPC., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Motivating a synergistic mixing-layer height retrieval method using backscatter lidar returns and microwave-radiometer temperature observations

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Tanamachi, Robin
  • Saeed, Umar|||0000-0003-0261-2767
Mixing-Layer-Height (MLH) retrieval methods using backscattered lidar signals from a ceilometer (Jenoptik CHM-15k Nimbus) and temperature profiles from a Microwave Radiometer (MWR, HATPRO RPG) are compared in terms of their complementary capabilities and associated uncertainties. The Extended Kalman Filter (EKF) is used for MLH retrieval from backscattered lidar signals and the parcel method is used for MLH retrieval from MWR-derived potential-temperature profiles. The two principal sources of uncertainty in ceilometer-based MLH estimates are (i) incorrect layer attribution (~ hundreds of meters) and (ii) noise-induced errors (about 50 m at 3σ). MWR MLH uncertainties comprise (i) the total uncertainty in the retrieved potential temperature profile and (ii) ±0.5 K uncertainty in the surface temperature. Ceilometer-and MWR-based MLH estimates are in turn compared with reference to MLH estimates from radiosoundings. Twenty one measurement days from the HD(CP)2 Observational Prototype Experiment (HOPE) campaign at Jülich, Germany are considered. It is shown that the MWR can track the full Mixed Layer (ML) diurnal cycle (i.e., including morning and evening transitions) with height-increasing error bars. The ceilometer-EKF MLH estimates are much smaller errorbars than those from the MWR under the well-developed clear-sky ML but the ceilometer-EKF is prone to ambiguous tracking some multilayer scenarios (e.g., the residual layer). We therefore introduce the synergistic MLH retrieval approach that combines both ceilometer and MWR estimates in order to optimize the benefits of both., This work was supported by the Spanish Government – European Regional Development Funds under PGC2018- 094132-B-I00 project, and via European Union (EU) Funds under projects ACTRIS-IMP (GA-871115) and GA 101008004 (ATMO-ACCESS). CommSensLab-UPC is a María-de-Maeztu Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of Marcos P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Motional behavior estimation using simple spectral estimation: application to the off-shore wind lidar

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Tiana Alsina, Jordi|||0000-0001-8359-9378
This paper proposes two methods to estimate the so-called “characteristic motional period” of a floating wind-lidar buoy. These techniques aim to characterise the buoy's pitch and roll tilting as simple harmonic motions by estimating their period. The “peak method” (PM) and the “3-dB method” are introduced as two different aproaches to study the multi-modality of the wave motion. Additionally, the off-shore wind measurement campaign at Ijmuiden's is briefly introduced to contextualize where data comes from and the added value of this study., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Floating Doppler Wind Lidar motion simulator for horizontal wind speed measurement error assessment

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Farré Guarné, Joan
  • Sala Álvarez, José|||0000-0002-6879-1991
  • Villares Piera, Nemesio Javier|||0000-0001-5701-9819
  • Tanamachi, Robin
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This study presents a wind retrieval simulator of a floating Doppler Wind Lidar (DWL) with 6 Degrees of Freedom (DoF) motion. The simulator considers a continuous-wave conical-scanning floating DWL which retrieves the wind vector from 50 radial velocities per scan. The 6 DoF motion framework as well as the most important buoy motion equations are summarized. Rotational and translational motion effects over HWS measurements are studied parametrically., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and H2020 ACTRIS- IMP (GA-871115). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigación (Spanish National Science Foundation). The work of Andreu Salcedo was supported by the “Agència de Gestió d’Adjuts Universitaris i de la Recerca (AGAUR)”, Generalitat de Catalunya, under Grant no. 2020 FISDU 00455., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Convective boundary-layer height estimation from combined radar and Doppler lidar observations in VORTEX-SE

  • Villalonga, Joan
  • Beveridge, Susan L.
  • Silva, Marcos Paulo Aráujo da
  • Tanamachi, Robin
  • Rocadenbosch Burillo, Francisco
  • Turner, David Dave
  • Frasier, Stephen J.
The Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) provides a wealth of long-duration, high-resolution, vertically pointing observations from active and passive ground-based remote sensing systems enabling characterization of the Atmospheric Boundary Layer (ABL) development over distinct regions that are well known for their relatively high tornado frequency. Application of the Extended Kalman Filter (EKF) to BL height estimation in the convective regime (CBLH) of the diurnal cycle from S-band radar reflectivity observations1 has shown to yield accurate results under simple CBL conditions. In this work, we revisit the radar-EKF technique and investigate its main limitations. For example, during daytime clear-sky conditions such as those prevailing in the BL morning transition, weak turbulence leads to very low reflectivity returns, limiting application of this technique. Additionally, turbulent mixing layers capped with a residual layer, and/or multi-layer scenarios can lead the filter to lose track of the BL signature over time. Doppler Wind Lidar (DWL) observations of the vertical wind velocity variance2 provide complementary CBLH estimates to those of the radar-EKF combination, providing potential to disambiguate more complex convective cases. DWL estimates are, however, strongly influenced by the variance threshold selected. The complementarity of radar and DWL for CBLH estimation is studied in reference to radiosoundings., This work was supported by NOAA grants NA1501R4590232 and NA16OAR4590209, and by the Purdue University Dept. of Earth, Atmospheric, and Planetary Sciences (EAPS). CommSensLab-UPC (Excellence Unit MDM-2016-0600 funded by the Agencia Estatal de Investigación, Spain) collaborated via Spanish Gov.- EU Regional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-PPP project GA-739530. The Spanish National Science Foundation (Ministerio de Ciencia, Innovación y Universidades) funded doctoral grant PRE2018-086054 hold by M.P. Araujo da Silva., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Robust Adaptive Unscented Kalman Filter for floating Doppler Wind-LiDAR motion correction

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Sospedra Iglesias, Joaquim
This study presents a new method for correcting the six degrees of freedom motion-induced error in ZephIR 300 floating Doppler Wind-LiDAR-derived data, based on a Robust Adaptive Unscented Kalman Filter. The filter takes advantage of the known floating Doppler Wind-LiDAR (FDWL) dynamics, a velocity–azimuth display algorithm, and a wind model describing the LiDAR-retrieved wind vector without motion influence. The filter estimates the corrected wind vector by adapting itself to different atmospheric and motion scenarios, and by estimating the covariance matrices of related noise processes. The measured turbulence intensity by the FDWL (with and without correction) was compared against a reference fixed LiDAR over a 25-day period at “El Pont del Petroli”, Barcelona. After correction, the apparent motion-induced turbulence was greatly reduced, and the statistical indicators showed overall improvement. Thus, the Mean Difference improved from -1.70% (uncorrected) to 0.36% (corrected), the Root Mean Square Error (RMSE) improved from 2.01% to 0.86%, and coefficient of determination improved from 0.85 to 0.93., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“Comm- SensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Motivating a synergistic mixing-layer height retrieval method using backscatter lidar returns and microwave-radiometer temperature observations

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Tanamachi, Robin
  • Saeed, Umar
Mixing-Layer-Height (MLH) retrieval methods using backscattered lidar signals from a ceilometer (Jenoptik CHM-15k Nimbus) and temperature profiles from a Microwave Radiometer (MWR, HATPRO RPG) are compared in terms of their complementary capabilities and associated uncertainties. The Extended Kalman Filter (EKF) is used for MLH retrieval from backscattered lidar signals and the parcel method is used for MLH retrieval from MWR-derived potential-temperature profiles. The two principal sources of uncertainty in ceilometer-based MLH estimates are (i) incorrect layer attribution (~ hundreds of meters) and (ii) noise-induced errors (about 50 m at 3σ). MWR MLH uncertainties comprise (i) the total uncertainty in the retrieved potential temperature profile and (ii) ±0.5 K uncertainty in the surface temperature. Ceilometer-and MWR-based MLH estimates are in turn compared with reference to MLH estimates from radiosoundings. Twenty one measurement days from the HD(CP)2 Observational Prototype Experiment (HOPE) campaign at Jülich, Germany are considered. It is shown that the MWR can track the full Mixed Layer (ML) diurnal cycle (i.e., including morning and evening transitions) with height-increasing error bars. The ceilometer-EKF MLH estimates are much smaller errorbars than those from the MWR under the well-developed clear-sky ML but the ceilometer-EKF is prone to ambiguous tracking some multilayer scenarios (e.g., the residual layer). We therefore introduce the synergistic MLH retrieval approach that combines both ceilometer and MWR estimates in order to optimize the benefits of both., This work was supported by the Spanish Government – European Regional Development Funds under PGC2018- 094132-B-I00 project, and via European Union (EU) Funds under projects ACTRIS-IMP (GA-871115) and GA 101008004 (ATMO-ACCESS). CommSensLab-UPC is a María-de-Maeztu Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of Marcos P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On adaptive unscented Kalman filtering for floating Doppler wind-lidar motion correction: Effect of the number of lidar measurement heights

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Sospedra Iglesias, Joaquim
This work studies the influence of the number of lidar measurement heights on the performance of the floating Doppler wind lidar motion-correction algorithm, recently published by the authors. The work is in the context of offshore wind energy and continuous-wave focusable ZephirTM 300 lidar. A downsampling technique applied over the lidar-measured wind speed time-series is used to simulate different height-sounding configurations. The operation of the filter under one, three, and five measurement heights of the lidar is studied by using data from El Pont del Petroli measurement campaign. The filter is proved to remove apparent turbulence addition in all three cases, showing a deterioration of statistical indicators as the number of sounding heights increase., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00, H2020 ACTRIS-IMP project GA-871115 and H2020 ATMO-ACCESS project GA101008004. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Offshore Doppler Wind LiDAR assessment of atmospheric stability

  • Silva, Marcos Paulo Aráujo da
  • Salcedo Bosch, Andreu
  • Gutiérrez Antuñano, Miguel Ángel
  • Rocadenbosch Burillo, Francisco
This paper tackles atmospheric stability typing using a Zephyr™ 300 offshore Doppler Wind Lidar in the context of its progressive acceptance in the offshore wind-energy industry. The lidar-retrieved wind-shear exponent, which is used as a proxy atmospheric stability, is compared against the wind-shear exponent and the potential temperature gradient both retrieved from reference metmast. A total sample of 4319 measurements is analysed from IJmuiden's test campaign, in the North Sea, from April 1 st to 30 th, 2015. Concerning stability typing, both lidar- and metmast-derived wind-shear indicators overestimated by 4% and 14%, respectively, the most frequent atmospheric stability case, which was convective (48% of the cases) according to the potential temperature reference indicator., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation) that also funded the project MDM-2016-0600-18-1. Spanish NSF (Ministry of Science, Innovation and Universities; Ministerio de Ciencia, Innovacion y Universidades) for doctoral grant PRE2018-086054 hold by Ph.D. student Araujo da Silva M.P. at CommSensLab-UPC., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Synergistic mixed-layer height retrieval method using microwave radiometer and lidar ceilometer observations

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Tanamachi, Robin
  • Saeed, Umar
This paper tackles synergistic mixed-layer height (MLH) estimation via a combination of microwave radiometer (MWR) and lidar ceilometer (LC)-based estimates. While MLH-MWR estimates rely on potential temperature retrievals, MLH-LC estimates rely on aerosol gradients. The pros and cons of MLH retrievals obtained from MWR via the parcel method and from LC via an extended Kalman filter (EKF)-based method are used to motivate the synergistic algorithm. The synergistic algorithm is introduced as a maximum-likelihood combination of MLH-MWR and MLH-LC. Two case examples from the 2013 HOPE campaign at Jülich, Germany, are used to show the robustness of the synergistic method and the effect of surface temperature measurement error. Doppler wind lidar retrievals and radiosonde reference MLH estimates are used for validation., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER. Data were provided by Julich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of M.P.A.S was supported under Grant PRE2018-086054 funded by MCIN/AEI/ 10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Variance processing for stable boundary-layer height estimation using backscatter lidar data: A discussion

  • Muñoz Porcar, Constantino
  • Silva, Marcos Paulo Aráujo da
  • Saeed, Umar
  • Rey Micolau, Francesc
  • Pay Pérez, M. Teresa
  • Rocadenbosch Burillo, Francisco
In this paper we present a method for estimating the height of the nocturnal stable boundary layer by using lidar measurements and a single radiosonde for unambiguous initial guess. The method relies on the correlation between aerosol stratifications in the stable boundary layer and minimum variance levels in the attenuated backscatter profile. The method is based on calculating either temporal or spatial variance vertical profiles of the attenuated backscatter and threshold-limited decision. A radiosonde temperature-based estimation is used to provide an initial guess if several minimum variance regions are detected. Two study cases using ceilometer data are shown. Comparison with temperature-based estimations from a collocated microwave radiometer have been used for validation. The method can be useful for estimating the stable boundary layer height in sites with a ceilometer but without any available temperature profiler., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-IMP (GA 871115). CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigación, Spain. The work of M.P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical solver for vertical air motion estimation

  • Salcedo Bosch, Andreu
  • Domínguez Pla, Paula
  • Rocadenbosch Burillo, Francisco
  • Frasier, Stephen J.
We present preliminary research on a method to estimate Vertical Air Motion (VAM) at a particular height by comparing the measured rain-rate (RR) by a vertically-pointing S-band Frequency-Modulated Continuous-Wave (FMCW) radar with that of a ground-based disdrometer. The method is based on a constrained parametric solver, assuming high correlation between 5-min averaged rain rates measured by the radar and disdrometer. The method is tested over disdrometer and radar observations during the Verification of the ORigins Tornado EXperiment in South East US (VORTEX-SE) project. Finally, the results are partially validated by means of fitting a gamma distribution to the VAM-corrected DSD profiles and studying its parameters., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMOACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Floating Doppler Wind Lidar measurement of wind turbulence: a cluster analysis

  • Salcedo Bosch, Andreu
  • Gutiérrez Antuñano, Miguel Ángel
  • Tiana Alsina, Jordi
  • Rocadenbosch Burillo, Francisco
The standard deviation of the Horizontal Wind Speed as a proxy of wind turbulence is used to compare the apparent wind turbulence measured by an off-shore floating Doppler lidar to the one measured by a fixed lidar on a metmast. We use statistical analysis based on clustering the horizontal wind speed measured by the floating lidar as well as buoy angular amplitude and period under the approximation of harmonic motion. Three scenarios with different wave and wind conditions are discussed from the IJmuiden's test campaign (North Sea.)., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhanced dual filter for floating wind lidar motion correction: The impact of wind and initial scan phase models

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Sospedra Iglesias, Joaquim
An enhanced filter for floating Doppler wind lidar motion correction is presented. The filter relies on an unscented Kalman filter prototype for floating-lidar motion correction without access to the internal line-of-sight measurements of the lidar. In the present work, we implement a new architecture based on two cooperative estimation filters and study the impact of different wind and initial scan phase models on the filter performance in the coastal environment of Barcelona. Two model combinations are considered: (i) a basic random walk model for both the wind turbulence and the initial scan phase and (ii) an auto-regressive model for wind turbulence along with a uniform circular motion model for the scan phase. The filter motion-correction performance using each of the above models was evaluated with reference to a fixed lidar in different wind and motion scenarios (low- and high-frequency turbulence cases) recorded during a 25-day campaign at “Pont del Petroli”, Barcelona, by clustered statistical analysis. The auto-regressive wind model and the uniform circular motion phase model permitted the filter to overcome divergence in all wind and motion scenarios. The statistical indicators comparing both instruments showed overall improvement. The mean deviation increased from 1.62% (without motion correction) to -0.07% (with motion correction), while the root-mean-square error decreased from 1.87% to 0.58%, and the determination coefficient (R2) improved from 0.90 to 0.96., This research project was part of projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ceilometer-based rain-rate estimation: A case-study comparison with S-band radar and disdrometer retrievals in the context of VORTEX-SE

  • Rocadenbosch Burillo, Francisco
  • Barragán Cuesta, Rubén
  • Frasier, Stephen J.
  • Waldinger, Joseph
  • Turner, David Dave
  • Tanamachi, Robin
  • Dawson, Daniel
Attenuated backscatter measurements from a Vaisala CL31 ceilometer and a modified form of the well-known slope method are used to derive the ceilometer extinction profiles during rain events, restricted to rainfall rates (RRs) below approximately 10 mm/h. RR estimates from collocated S-band radar and portable disdrometer are used to derive the RR-to-extinction correlation models for the ceilometer-radar and ceilometer-disdrometer combinations. Data were collected during an intensive observation period of the Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) conducted in northern Alabama. These models are used to estimate the RR from the ceilometer observations in similar situations that do not have collocated radar or the disdrometer. Such correlation models are, however, limited by the different temporal and spatial resolutions of the measured variables, measurement capabilities of the instruments, and the inherent assumption of a homogeneous atmosphere. An empirical method based on extinction and RR uncertainty scoring and covariance fitting are proposed to solve, in part, these limitations., This work was supported by the National Oceanic and Atmospheric Administration (NOAA) under Grant NA1501R4590232 and Grant NA16OAR4590209 and by the Department of Earth, Atmospheric, and Planetary Sciences, Purdue University. CommSensLab-Universitat Politècnica de Catalunya (UPC) (which is a María de Maeztu Excellence Unit funded by the Agencia Estatal de Investigación, Spain; MDM-2016-0600) collaborated via Spanish Government - European Regional Development Funds under PGC2018-094132-B-I00 and TEC2015- 63832-P projects, and via European Union (funds) (EU) Funds under Grant H2020 ACTRIS-2 (GA-654109) and Grant ACTRIS-PPP (GA-739530). The work of Rubén Barragán was supported by the Spanish Ministry of Science, Innovation and Universities under Grant BES-2013-066340., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Estimation of wave period from pitch and roll of a lidar buoy

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Gutiérrez Antuñano, Miguel Ángel
  • Tiana Alsina, Jordi
This work proposes a new wave-period estimation (L-dB) method based on the power-spectral-density (PSD) estimation of pitch and roll motional time series of a Doppler wind lidar buoy under the assumption of small angles (±22 deg) and slow yaw drifts (1 min), and the neglection of translational motion. We revisit the buoy’s simplified two-degrees-of-freedom (2-DoF) motional model and formulate the PSD associated with the eigenaxis tilt of the lidar buoy, which was modelled as a complex-number random process. From this, we present the L-dB method, which estimates the wave period as the average wavelength associated to the cutoff frequency span at which the spectral components drop off L decibels from the peak level. In the framework of the IJmuiden campaign (North Sea, 29 March–17 June 2015), the L-dB method is compared in reference to most common oceanographic wave-period estimation methods by using a TriaxysTM buoy. Parametric analysis showed good agreement (correlation coefficient, ρ = 0.86, root-mean-square error (RMSE) = 0.46 s, and mean difference, MD = 0.02 s) between the proposed L-dB method and the oceanographic zero-crossing method when the threshold L was set at 8 dB., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-IMP project GA-871115. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigación, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Motional behavior estimation using simple spectral estimation: application to the off-shore wind lidar

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Gutiérrez Antuñano, Miguel Ángel
  • Tiana Alsina, Jordi
This paper proposes two methods to estimate the so-called “characteristic motional period” of a floating wind-lidar buoy. These techniques aim to characterise the buoy's pitch and roll tilting as simple harmonic motions by estimating their period. The “peak method” (PM) and the “3-dB method” are introduced as two different aproaches to study the multi-modality of the wave motion. Additionally, the off-shore wind measurement campaign at Ijmuiden's is briefly introduced to contextualize where data comes from and the added value of this study., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Floating lidar assessment of atmospheric stability in the North Sea

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu
  • González Marco, Daniel
  • Peña Diaz, Alfredo
In this work, the 2D parametric-solver algorithm [1] used to assess atmospheric stability from floating Doppler wind lidar (FDWL) measurements is revisited. The algorithm performance is studied using data from IJmuiden campaign. Mast-measured temperature and wind-speed provided the reference parameters used to evaluate the performance of the stability estimation algorithm. From 5,922 10-min samples available, the algorithm classified the atmosphere as stable (52% of the cases), neutral (31%) and unstable (17%), which successfully agreed with the mast-derived reference classification (53%, 30% and 17%, respectively)., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Atmospheric boundary layer height disambiguation using synergistic remote sensing observations: case examples from VORTEX-SE

  • Rocadenbosch Burillo, Francisco
  • Tanamachi, Robin
  • Silva, Marcos Paulo Aráujo da
  • Villalonga, Joan
  • Frasier, Stephen J.
  • Turner, David Dave
Synergistic remote sensing of the atmosphere, combined with adaptive techniques, offers unprecedented opportunities to characterise the evolution of key atmospheric features such as the Atmospheric Boundary Layer (ABL). Using long-duration, high-resolution, profiling observations from active and passive ground-based remote sensing systems during the Verification of the Origins of Rotation in Tornadoes Experiment{Southeast (VORTEX-SE) 2017 field campaign, an attempt is made to characterise ABL development over distinct regions that are well known for their relatively high tornado frequency. In this study, observing systems include an S-band radar, Vaisala CL-31 ceilometer, Doppler Wind lidar (DWL) and radiometric observations from the Collaborative Lower Atmosphere Mobile Profiling System (CLAMPS). In this work, ABL height (ABLH) tracking over the diurnal cycle, and - up to a point - its disambiguation over selected non-precipitating case examples, are attempted. Different observational sets are used, namely, radar reflectivity observations assimilated into a Kalman filter, DWL profiles of the vertical velocity, and virtual potential temperature profiles, as well as radiosoundings and cloudbase reference information collected during Intensive Observation Periods (IOP) carried out in VORTEX-SE, Alabama during 2017. Limitations and advantages of each system are discussed., This work was supported by NOAA grants NA1501R4590232 and NA16OAR4590209, and by the Purdue University Dept. of Earth, Atmospheric, and Planetary Sciences (EAPS). CommSensLab-UPC (Excellence UnitMDM-2016-0600 funded by the Agencia Estatal de Investigación, Spain) collaborated via Spanish Gov.– EURegional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-PPP project GA-739530. The Spanish National Science Foundation (Ministerio de Ciencia, Innovación y Universidades) funded doctoral grant PRE2018-086054 hold by M.P. Araujo da Silva., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Floating Doppler Wind Lidar motion simulator for horizontal wind speed measurement error assessment

  • Salcedo Bosch, Andreu
  • Farré Guarné, Joan
  • Sala Álvarez, José
  • Villares Piera, Nemesio Javier
  • Tanamachi, Robin
  • Rocadenbosch Burillo, Francisco
This study presents a wind retrieval simulator of a floating Doppler Wind Lidar (DWL) with 6 Degrees of Freedom (DoF) motion. The simulator considers a continuous-wave conical-scanning floating DWL which retrieves the wind vector from 50 radial velocities per scan. The 6 DoF motion framework as well as the most important buoy motion equations are summarized. Rotational and translational motion effects over HWS measurements are studied parametrically., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and H2020 ACTRIS- IMP (GA-871115). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigación (Spanish National Science Foundation). The work of Andreu Salcedo was supported by the “Agència de Gestió d’Adjuts Universitaris i de la Recerca (AGAUR)”, Generalitat de Catalunya, under Grant no. 2020 FISDU 00455., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing Obukhov length and friction velocity from floating lidar observations: A data screening and sensitivity computation approach

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu
  • González Marco, Daniel
  • Peña Diaz, Alfredo
This work presents a parametric-solver algorithm for estimating atmospheric stability and friction velocity from floating Doppler wind lidar (FDWL) observations close to the mast of IJmuiden in the North Sea. The focus of the study was two-fold: (i) to examine the sensitivity of the computational algorithm to the retrieved variables and derived stability classes (the latter through confusion-matrix theory), and (ii) to present data screening procedures for FDWLs and fixed reference instrumentation. The performance of the stability estimation algorithm was assessed with reference to wind speed and temperature observations from the mast. A fixed-to-mast Doppler wind lidar (DWL) was also available, which provides a reference for wind-speed observations free from sea-motion perturbations. When comparing FDWL- and mast-derived mean wind speeds, the obtained determination coefficient was as high as that of the fixed-to-mast DWL against the mast (ρ2=0.996) with a root mean square error (RMSE) of 0.25 m/s. From the 82-day measurement campaign at IJmuiden (10,833 10 min records), the parametric algorithm showed that the atmosphere was neutral (31% of the cases), stable (28%), or near-neutral stable (19%) during most of the campaign. These figures satisfactorily agree with values estimated from the mast measurements (31%, 27%, and 19%, respectively)., This research was part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (Comm- SensLab Excellence Unit) funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER. The work of M.P.A.S was supported under grant PRE2018-086054 funded by MCIN/AEU/10.13039/501100011033 and FSE “El FSE in- vierte en tu futuro”. The work of A.S-B was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed, Postprint (published version)