Pasar al contenido principal

APLICACION DE LA FABRICACION ADITIVA LDED A VIDRIO Y VITROCERAMICAS: HACIA MATERIALES DE ALTO RENDIMIENTO MECANICO

PID2022-138763OA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recycling technologies and applications of borosilicate glasses

  • Gorni, Giulio
  • Comesaña, Rafael
  • Pou, Juan
  • Pascual, M. Jesús
Borosilicate glasses, known for their thermal resistance, chemical inertness, and mechanical strength, play a crucial role in technical applications as well as in the pharmaceutical industry. Despite their widespread use and versatility, most borosilicate glass wastes (BSGW) end up in landfills or are incinerated, rendering this valuable resource useless. This review provides an overview of recycling strategies for borosilicate glasses, with emphasis on technological approaches and potential applications spanning building and construction, insulation and filtering, functional materials, and materials for radiation shielding or nuclear waste immobilization, as well as opportunities for material recovery within the ceramics and glass industry or a source of boron or other critical raw materials. The economic viability and life cycle assessment (LCA) of GW recycling are addressed, considering energy consumption, scalability, and output quality across various technologies versus virgin material production. Furthermore, the review considers policies, such as the European Union's goal of fully recyclable packaging by 2030, and discusses limitations and challenges, such as the need to sterilize pharmaceutical GW and contamination risks of borosilicate GW streams with soda lime glass, as well as commercialization barriers and incentive schemes to promote BSGW recycling. New perspectives based on laser processing of borosilicate GW are also shown and aimed to open pathways toward full recyclability of these materials. This approach contributes not only to improved environmental sustainability but also promotes the use of BSGW in advanced technological applications. Finally, research priorities and underexplored areas are discussed to inspire and guide future investigations. © The Author(s) 2026. This article is distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 License (https://creativecommons.org/licenses/by-nc/4.0/) which permits non-commercial use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access page (https://us.sagepub.com/en-us/nam/open-access-at-sage)., This work was partially supported by the EU research project EVERGLASS (HORIZON EUROPE. Program HORIZONEIC- 2023-PATHFINDEROPEN-01 (PN:101129967)), Government of Spain [MCI/AEI/FEDER, UE (PID2022-138763OA-100), and by Xunta de Galicia (ED431C 2023/25)., Peer reviewed
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Femtosecond laser surface texturing of pure zinc for biomedical applications

  • Gago Vidal, Bruno
  • Calvo Garcia, Erik
  • González Quintas, Mario
  • Pérez Alfaro, Rubén
  • Fernández Pérez, Hugo
  • Pou Álvarez, Pablo
  • Comesaña Piñeiro, Rafael
  • Badaoui Fernández, Aida
  • Pou Saracho, Juan María
  • Riveiro Rodríguez, Antonio
Femtosecond laser surface texturing is a promising technique to tune the corrosion behavior of biodegradable materials to better match tissue healing rates. Zinc stands out for its biodegradability, moderate corrosion rate, and low corrosion product accumulation, but the effects of laser texturing parameters on its degradation rate have not been fully explored yet. This work investigates femtosecond laser texturing of pure zinc, evaluating the effects of laser intensity, scanning speed, pitch, and number of passes on surface properties and corrosion performance. The ultrashort laser pulses enabled precise surface structuring through localized material removal while limiting the heat affected zone, with an increase in the surface oxygen content of the textured samples. The influence of laser texturing parameters was assessed using a statistically planned approach. All laser variables significantly affected roughness, leading to a regression model with an adjusted-R2 of 0.99. Higher roughness also enhanced surface hydrophobicity. Laser-treated samples were subjected to immersion tests over 14 days in NaCl solution, which caused significant mass losses and increased solution pH, both strongly dependent on the laser radiant exposure. In general, laser-treated samples exhibited lower mass losses and pH changes than non-treated zinc, which is attributed to the formation of the protective oxide layer generated during laser treatments. The maximum Zn2+ concentration was reached on the first day and subsequently decreased over time due to the precipitation of corrosion products. These results demonstrate the possibility of tailoring the degradation behavior of zinc surfaces for biomedical applications., Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00, Agencia Estatal de Investigación | Ref. PID2022-138763OA-I00, Xunta de Galicia | Ref. ED431C 2023/25, Universidade de Vigo/CISUG