Pasar al contenido principal

NUEVOS APOSITOS BASADOS EN NANOFIBRAS DE VIDRIO BIOACTIVO PRODUCIDAS POR LASER SPINNING

PID2020-117900RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Efficient autonomous dew water harvesting by laser micropatterning: superhydrophilic and high emissivity robust grooved metallic surfaces enabling filmwise condensation and radiative cooling

  • Pou Álvarez, Pablo
  • Mongruel, Anne
  • Lavielle, Nicolas
  • Riveiro Rodríguez, Antonio
  • Bourouina, Tarik
  • Royon, Laurent
  • Pou Saracho, Juan María
  • Beysens, Daniel
The present work explores a unique yet unexplored synergy between the properties of laser micropatterned metallic surfaces and the requirements for an autonomous dew water harvesting candidate material. Laser‐patterned aluminum surfaces achieved simultaneously high infrared emissivity (up to 0.95 in the atmospheric window) and superhydrophilic wettability (water contact angle of 0°), key properties enabling passive radiative cooling and filmwise condensation dynamics respectively. The generation of micrometric‐sized grooves during laser processing plays a fundamental role in both properties, as they provide a broadband enhancement of the emissivity based on multiscale topographies and oxide layers, while limiting the growth of the water film during condensation through strong capillary wicking forces. As a result, the patterned aluminum surfaces display self‐cooling capacities under radiative deficit conditions as well as low water retention levels (three times lower than the untreated dropwise condensation counterparts). The promising results obtained lead to the construction and evaluation of a real size outdoors autonomous dew water harvesting system based on those surfaces, demonstrating the scalability of the technology. A 70% improvement in the collected dew water in comparison to a state‐of‐the‐art reference material is consistently measured during 1‐year outdoor study, proving the robustness of the surfaces and their performance., Xunta de Galicia | Ref. ED431C 2023/25, Xunta de Galicia | Ref. ED481B‐2023‐030, Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00, Agencia Estatal de Investigación | Ref. EQC2018-004315-P
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Multi-criteria optimization of laser cladding: integrating process parameters and costs

  • Barro Guizán, Óscar
  • Arias González, Felipe
  • Mejías Sacaluga, Ana María
  • Lusquiños Rodríguez, Fernando
  • Wallerstein Figueirôa, Daniel
  • Del Val Garcia, Jesús
  • Pardo Froján, Juan Enrique
  • Pou Saracho, Juan María
This study presents a novel approach in the laser cladding optimization field by integrating economic analysis with performance optimization. Despite extensive research on laser cladding technical performance, its economic evaluation—particularly when merged with productivity assessment—has scarcely received attention. This work addresses this gap by integrating an economic and productivity analysis with a standard performance evaluation through the employment of a multi-criteria optimization approach to balance technical and economic performances. To achieve this objective, a multi-parametric optimization via response surface methodology (RSM) and desirability function analysis has been developed. Results indicate that the employment of desirability analysis after RSM modeling is a valuable approach for laser cladding analysis, allowing the particular weighting of each result and providing the possibility of selecting processing parameters depending on the specific objective at any given time., Agencia Estatal de Investigación | Ref. TED2021-131721B-I00, Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00, Xunta de Galicia | Ref. ED431C 2023/25
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Nanosecond, picosecond and femtosecond laser surface treatment of magnesium alloy: role of pulse length

  • Pou Alvarez, Pablo
  • Riveiro Rodríguez, Antonio
  • Nóvoa Rodríguez, Xosé Ramón
  • Fernández Arias, Mónica
  • Del Val Garcia, Jesús
  • Comesaña Piñeiro, Rafael
  • Boutinguiza Larosi, Mohamed
  • Lusquiños Rodríguez, Fernando
  • Pou Saracho, Juan María
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Despite having a whole range of applications as in weight-saving structures, biodegradable implants and rechargeable batteries, the usage of magnesium is still hindered by its high tendency to corrosion. Pulsed laser treatments are an interesting approach to modify the surface of magnesium aiming the improvement of the corrosion properties as well as the generation a controlled roughness, which is useful for improving coatings adhesion or tailoring the interactions with living cells at the surface of an implant. In this work, a novel study on the role of the pulse length on topography and corrosion properties of AZ31 magnesium alloy laser-treated surfaces is presented. Three different laser sources with pulse lengths of 20 ns, 800 ps and 266 fs were employed with a similar experimental setup. Surface topography analysis revealed a reduction of the amount of melt generated and an increase in the aspect ratio (depth/width) of the ablated features as the pulse length is reduced. All three treatments significantly improved the corrosion performance of the untreated base material. Thicker and more homogenously distributed recast material for the longer pulses of the nanosecond treatment resulted in a longer-lasting protection (11–12 fold reduction in mass loss rate vs base material) compared to the pico- and femtosecond treatments (4–5 fold reduction), Ministerio de Ciencia e Innovación | Ref. PID2020-117900RB-I00, Ministerio de Ciencia, Innovación y Universidades | Ref. EQC2018-004315-P, Xunta de Galicia | Ref. ED431C 2019/23, Ministerio de Universidades | Ref. FPU16/05492
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Silver nanoparticles produced by laser ablation and re-irradiation are effective preventing peri-implantitis multispecies biofilm formation

  • Pérez Tanoira, Ramón
  • Fernández Arias, Mónica
  • Potel, Carmen
  • Carballo Fernández, Raquel
  • Pére -Castro, Sonia
  • Boutinguiza Larosi, Mohamed
  • Górgolas, Miguel
  • Lusquiños Rodríguez, Fernando
  • Pou Saracho, Juan María
Implant-associated infection due to biofilm formation is a growing problem. Given that silver nanoparticles (Ag-NPs) have shown antibacterial effects, our goal is to study their effect against multispecies biofilm involved in the development of peri-implantitis. To this purpose, Ag-NPs were synthesized by laser ablation in de-ionized water using two different lasers, leading to the production of colloidal suspensions. Subsequently, part of each suspension was subjected to irradiation one and three times with the same laser source with which it was obtained. Ag-NPs were immobilized on the surface of titanium discs and the resultant materials were compared with unmodified titanium coupons. Nanoparticles were physico-chemically analysed to determine their shape, crystallinity, chemical composition, and mean diameter. The materials were incubated for 90 min or 48 h, to evaluate bacterial adhesion or biofilm formation respectively with Staphylococcus aureus or oral mixed bacterial flora composed of Streptococcus oralis, Actinomyces naeslundii, Veionella dispar, and Porphyromonas gingivalis. Ag-NPs help prevent the formation of biofilms both by S. aureus and by mixed oral bacterial flora. Nanoparticles re-irradiated three times showed the biggest antimicrobial effects. Modifying dental implants in this way could prevent the development of peri-implantitis., Xunta de Galicia | Ref. ED431C 2019/23, Ministerio de Ciencia e Innovación | Ref. PID2020-117900RB-I00, Ministerio de Ciencia e Innovación | Ref. EQC2018-004315-P, Interreg Atlantic Area | Ref. Bluehuman EAPA_151/2016
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Characterization of Co-Cr-W dental alloys with veneering materials manufactured via subtractive milling and additive manufacturing LDED methods

  • Barro Guizán, Óscar
  • Arias González, Felipe
  • Lusquiños Rodríguez, Fernando
  • Comesaña Piñeiro, Rafael
  • Del Val Garcia, Jesús
  • Riveiro Rodríguez, Antonio
  • Badaoui Fernández, Aida
  • Gómez Baño, Félix
  • Pou Saracho, Juan María
Laser-directed energy deposition (LDED) is an additive manufacturing (AM) technology which can be an alternative to the traditional subtractive milling process for the obtention of porcelain-fused-to-metal (PFM) prosthesis. Still, the adhesion performance of the veneering ceramics for this material has been not studied yet. The main objective of this study is to perform a systematic comparison of the adhesion performance of Co-Cr-W metal frameworks obtained through LDED and conventional milling techniques. Comparison includes microstructural, superficial, and adhesion analysis. Co-Cr manufactured via LDED technique presents similar behavior (p < 0.05) in comparison to the material obtained via milling techniques, and its performance was validated with the veneering ceramics and veneering composites currently employed in the dental industry., Ministerio de Ciencia e Innovación | Ref. EQC2019-005892-P, Xunta de Galicia | Ref. ED431C 2019/23, Ministerio de Ciencia e Innovación | Ref. PID2020-117900RB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Lithium orthosilicate solid porous membranes for CO2 capture obtained from silica microfibers

  • Penide Durán, Joaquín
  • Stavrakakis, Efstratios
  • Quintero Martínez, Félix
  • Poulidi, Danai
  • Riveiro Rodríguez, Antonio
  • Del Val Garcia, Jesús
  • Comesaña Piñeiro, Rafael
  • Lusquiños Rodríguez, Fernando
  • Pou Saracho, Juan María
Lithium orthosilicate (Li4SiO4) has demonstrated a high CO2 adsorption rate and capacity and its suitability to be implemented in industry as CO2 capture technology at high temperatures. The optimum solid adsorbent should present a porous structure to maximize surface and enable a high sorption rate. In this work, we present an original approach based on the use of a novel architecture of precursors in the form of very thin free-standing solid silica fibers. An original technique called continuous fiberizing by laser melting (Cobiflas) was used to obtain membranes of pure silica fibers with diameters in the micrometer range, forming a porous membrane which offer a high surface and porous connectivity to be used as precursors without any supporting substrate. Then, we employed a method based on the impregnation of the silica fibers within a lithium-containing aqueous solution and subsequent calcination to obtain a porous solid adsorbent with the maximum proportion of lithium orthosilicate. This method is compared with the results obtained using a sol-gel powder method by analyzing their composition using X-Ray Diffraction (XRD), and their adsorption capacity and adsorption kinetics by Thermogravimetric analyses (TGA). As a result, an outstanding type of solid adsorbent is reported with a 31% adsorption capacity and a total regeneration capacity, which is over 0.8 efficiency with regard to the theoretical maximum adsorption of this material., Xunta de Galicia | Ref. ED431C 2023/25, Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Bimetallic Pd/CuO nanoparticles obtained by laser re-irradiation in liquids for antibacterial applications

  • Vilas Iglesias, Ana María
  • Fernández Arias, Mónica
  • Boutinguiza Larosi, Mohamed
  • Rodríguez, Daniel
  • Solla Agra, Eugenio Luis
  • Vilella, Tània
  • Del Val Garcia, Jesús
  • Riveiro Rodríguez, Antonio
  • Gil Castaño, Javier
  • Pou Saracho, Juan María
Antimicrobial resistance (AMR) is considered a major global health problem of the 21st century. Noble metal nanoparticles (NPs) have attracted increasing attention as a promising tool to fight against resistant infections. In this research, we explore bimetallic NPs, as they can give rise to further and improved physicochemical and biological properties. In this work, monometallic Cu/CuO and Pd NPs were synthesized by laser ablation. Afterwards, these NPs were mixed and the resulting colloidal solution was multiply re-irradiated with the aim of producing Pd/CuO bimetallic NPs. All the NPs presented rounded shape and crystalline microstructure. Although the re-irradiated NPs contained both precursor materials, all characterization techniques agreed on the occurrence of an intermetallic alloy of both materials, Cu 3 Pd, that is concluded to be formed as a consequence of the interaction between the laser beam and the mixture of monometallic NPs. With the objective of studying antimicrobial activity against Staphylococcus aureus, the CuO NPs, Pd NPs and Pd/CuO NPs were immobilized on the surface of titanium discs. Ion release was tracked during the first 24 h and cytotoxicity of the immobilized NPs was as well tested with HFF-1 human fibroblast cell line. Bimetallic Pd/CuO NPs showed a significant inhibitory effect on S. aureus and no toxic impact on fibroblasts., Xunta de Galicia | Ref. ED431C 2023/25, Agencia Estatal de Investigación | Ref. PID2020–117900RB-I00, Agencia Estatal de Investigación | Ref. PID2021–125150OB-I00, Agencia Estatal de Investigación | Ref. TED2021-131721B-100, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU21/04488, Agencia Estatal de Investigación | Ref. EQC2018–004315-P, Agencia Estatal de Investigación | Ref. RED2018–102803- T
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Influence of fiber dimensions on the mechanical properties of silica glass nanofibers

  • Barciela Sánchez, Raúl
  • Quintero Martínez, Félix
  • Mahadevan, Thiruvilla S.
  • Riveiro Rodríguez, Antonio
  • Pou Saracho, Juan María
  • Du, Jincheng
The understanding of the mechanical properties in glass nanofibers remains a challenge. As the fiber diameter decreases, surface-to-volume atom fraction increases, making the impact of surface defects more significant. To elucidate these effects, we employed classical molecular dynamics (MD) simulations to investigate how fiber dimensions and the surface layer influence the mechanical properties of silica glass nanofibers. Our simulation methodology included fibers of varying diameters, generated using two different production methods (i.e. “cutting” and “casting” methods) that produce different degrees of surface atomic defects, and compared with bulk samples without surface atoms. The defect-rich surface layer of these fibers was carefully analyzed. Then, MD tensile simulations were performed to analyze the effect of the fiber surface on the mechanical properties and to explain the onset of the brittle-to-ductile transition experimentally observed at a few tens of nanometers. The results revealed that the surface layer maintains a fixed thickness independent of the fiber diameter, resulting in a pronounced increase of the fiber defects in thin fibers. Also, the tensile test simulations show that surface defects significantly reduce tensile strength, without appreciably increasing ductility compared to bulk samples. In turn, we show that the brittle-to-ductile transition is not caused by the surface defects, but related to a balance between fracture energy and elastic energy, which varies with fiber length. Using experimental values of different glass properties, our theory predicted a threshold length of around 200 nm, below which ductile fracture dominates, in reasonable agreement with experimental results., Ministerio de Ciencia e Innovación | Ref. FPU20/03112, Xunta de Galicia | Ref. ED431C 2023/25, Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Cobalt containing glass fibres and their synergistic effect on the HIF-1 pathway for wound healing applications

  • Solanki, Anu K.
  • Autefage, Hélène
  • Riveiro Rodríguez, Antonio
  • Agarwal, Shweta
  • Penide Durán, Joaquín
  • Mahat, Muzamir
  • Whittaker, Thomas
  • Nommeots-Nomm, Amy
  • Littmann, Elena
  • Payne, David J.
  • Metcalfe, Anthony D.
  • Quintero Martínez, Félix
  • Pou Saracho, Juan María
  • Stevens, Molly M.
  • Jones, Julian R.
Introduction and Methods: Chronic wounds are a major healthcare problem, but their healing may be improved by developing biomaterials which can stimulate angiogenesis, e.g. by activating the Hypoxia Inducible Factor (HIF) pathway. Here, novel glass fibres were produced by laser spinning. The hypothesis was that silicate glass fibres that deliver cobalt ions will activate the HIF pathway and promote the expression of angiogenic genes. The glass composition was designed to biodegrade and release ions, but not form a hydroxyapatite layer in body fluid. Results and Discussion: Dissolution studies demonstrated that hydroxyapatite did not form. When keratinocyte cells were exposed to conditioned media from the cobalt-containing glass fibres, significantly higher amounts of HIF-1α and Vascular Endothelial Growth Factor (VEGF) were measured compared to when the cells were exposed to media with equivalent amounts of cobalt chloride. This was attributed to a synergistic effect of the combination of cobalt and other therapeutic ions released from the glass. The effect was also much greater than the sum of HIF-1α and VEGF expression when the cells were cultured with cobalt ions and with dissolution products from the Co-free glass, and was proven to not be due to a rise in pH. The ability of the glass fibres to activate the HIF-1 pathway and promote VEGF expression shows the potential for their use in chronic wound dressings., National Institute for Health Research (Reino Unido) | Ref. II-ES-1010-10094, Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Palladium nanoparticles synthesized by laser ablation in liquids for antimicrobial applications

  • Fernández Arias, Mónica
  • Vilas Iglesias, Ana María
  • Boutinguiza Larosi, Mohamed
  • Rodríguez, Daniel
  • Arias González, Felipe
  • Pou Álvarez, Pablo
  • Riveiro Rodríguez, Antonio
  • Gil, Javier
  • Pou Saracho, Juan María
Antibiotic resistance is a leading cause of death worldwide. In this paper, we explore new alternatives in the treatment of infections. Noble metal nanoparticles could help to mitigate this problem. In this work, palladium nanoparticles were synthesized by laser ablation in order to explore their antimicrobial capacity. To obtain palladium nanoparticles, a palladium plate immersed in water, or methanol, was ablated, using two pulsed lasers that emit radiation with wavelengths of 532 nm and 1064 nm, respectively. Pure Pd-NPs with crystalline microstructure and rounded shape were obtained. The nanoparticles’ size is more homogeneous if the laser wavelength is 532 nm, and it decreases when methanol is used as solvent, reaching mean diameters smaller than 6 nm. With the objective of studying antimicrobial activity against Staphylococcus aureus, the Pd-NPs were immobilized on the surface of titanium discs. The release of palladium ions was recorded during the first seven days, and the cytotoxicity of the immobilized NPs was also tested with L929 mouse fibroblast cell line. Palladium nanoparticles synthesized by means of the infrared laser in methanol showed a strong inhibitory effect on S. aureus and good cytocompatibility, with no toxic effect on fibroblast cells., Xunta de Galicia | Ref. ED431C 2019/23, Universidad de Vigo | Ref. Beca Margarita Salas, Ministerio de Ciencia e Innovación | Ref. PID2020-117900RB-I00, Ministerio de Ciencia e Innovación | Ref. EQC2018-004315-P, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/05492, Ministerio de Ciencia, Innovación y Universidades | Ref. RED2018-102803- T
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Size effects on the fracture behavior of amorphous silica from molecular dynamics simulations

  • Barciela Sánchez, Raúl
  • Mahadevan, Thiruvilla S.
  • Quintero Martínez, Félix
  • Pou Saracho, Juan María
  • Du, Jincheng
In this work, the role of structure size and interaction potential on the ductility and mechanical properties of bulk glasses are extensively analyzed using molecular dynamics (MD) simulations. Elastic moduli and mechanical properties for bulk silica structures were calculated from the MD trajectories using three different force fields - diffusive charge reactive potential (DCRP), Teter and Vashishta potentials. These results from MD simulations were compared to experimental measurements and the overall results reassert that, while the elastic moduli show a neglectable variation with structure size, the fracture behavior is considerably affected. Specifically, it is found that the length along the deformation axis is the driver for the brittle to ductile transition. The fracture results, combined with an energy analysis, reveal that the energetic condition for brittle fracture, where elastic strain energy should overcome the fracture surface energy, remains valid for the three potentials, Xunta de Galicia | Ref. ED431C 2023/25, US National Science Foundation | Ref. 1662288, Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00, Ministerio de Universidades | Ref. FPU20/03112
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

CO2 laser cleaning of gum residues on architectural stone and quantitative assessment by hyperspectral imaging

  • Quintero Martínez, Félix
  • Reinoso, V.
  • Jiménez Desmond, Daniel José
  • Andrés Herguedas, Laura
  • Del Val Garcia, Jesús
  • Fernández Arias, Mónica
  • Barro Guizán, Óscar
  • Ramil, A.
  • Pozo Antonio, José Santiago
  • Pou Saracho, Juan María
Different methods have been developed to remove deposits or crusts on the architectonic elements located in the center of the cities, such as graffiti, patinas, gypsum black crusts, etc. Short pulsed lasers with wavelengths ranging from UV to NIR have demonstrated to be effective to clean some of these deposits or crusts. Here, we present an alternative laser cleaning method to remove chewing gum on architectural elements of natural stone, based on the use of a continuous wave, low power CO2 laser emitting in its fundamental wavelength (10.6 μm). Chewing gums are mainly composed of their rubber or elastomer components which strongly absorb the CO2 laser radiation. Thus, we demonstrate the effectiveness of this compact and robust type of laser to clean these substances, deposited on granite, without damaging the substrate. Additionally, we propose a method to quantitatively assess the cleaning level based on hyperspectral reflectance imaging. This method is based on the determination of the coefficients of abundance of granite (αG) using reflectance curves obtained by a hyperspectral camera. The results obtained have been confirmed using characterization techniques commonly used in the cleaning level determination: stereomicroscopy, profilometry, Raman spectroscopy and Fourier-transform infrared spectroscopy. This non-invasive method of cleaning control will allow decisions to be made in real time during the cleaning process of architectonic heritage, avoiding over-cleaning or insufficient cleaning., Interreg Atlantic Area | Ref. EAPA_151/2016, Xunta de Galicia | Ref. ED431C 2023/25, Xunta de Galicia | Ref. ED481A-2023/086, Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00, Agencia Estatal de Investigación | Ref. PRE2022-105106, Agencia Estatal de Investigación | Ref. RYC2020-028902-I