Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Efficient autonomous dew water harvesting by laser micropatterning: superhydrophilic and high emissivity robust grooved metallic surfaces enabling filmwise condensation and radiative cooling

  • Pou Álvarez, Pablo
  • Mongruel, Anne
  • Lavielle, Nicolas
  • Riveiro Rodríguez, Antonio
  • Bourouina, Tarik
  • Royon, Laurent
  • Pou Saracho, Juan María
  • Beysens, Daniel
The present work explores a unique yet unexplored synergy between the properties of laser micropatterned metallic surfaces and the requirements for an autonomous dew water harvesting candidate material. Laser‐patterned aluminum surfaces achieved simultaneously high infrared emissivity (up to 0.95 in the atmospheric window) and superhydrophilic wettability (water contact angle of 0°), key properties enabling passive radiative cooling and filmwise condensation dynamics respectively. The generation of micrometric‐sized grooves during laser processing plays a fundamental role in both properties, as they provide a broadband enhancement of the emissivity based on multiscale topographies and oxide layers, while limiting the growth of the water film during condensation through strong capillary wicking forces. As a result, the patterned aluminum surfaces display self‐cooling capacities under radiative deficit conditions as well as low water retention levels (three times lower than the untreated dropwise condensation counterparts). The promising results obtained lead to the construction and evaluation of a real size outdoors autonomous dew water harvesting system based on those surfaces, demonstrating the scalability of the technology. A 70% improvement in the collected dew water in comparison to a state‐of‐the‐art reference material is consistently measured during 1‐year outdoor study, proving the robustness of the surfaces and their performance., Xunta de Galicia | Ref. ED431C 2023/25, Xunta de Galicia | Ref. ED481B‐2023‐030, Agencia Estatal de Investigación | Ref. PID2020-117900RB-I00, Agencia Estatal de Investigación | Ref. EQC2018-004315-P
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Nanosecond, picosecond and femtosecond laser surface treatment of magnesium alloy: role of pulse length

  • Pou Alvarez, Pablo
  • Riveiro Rodríguez, Antonio
  • Nóvoa Rodríguez, Xosé Ramón
  • Fernández Arias, Mónica
  • Del Val Garcia, Jesús
  • Comesaña Piñeiro, Rafael
  • Boutinguiza Larosi, Mohamed
  • Lusquiños Rodríguez, Fernando
  • Pou Saracho, Juan María
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Despite having a whole range of applications as in weight-saving structures, biodegradable implants and rechargeable batteries, the usage of magnesium is still hindered by its high tendency to corrosion. Pulsed laser treatments are an interesting approach to modify the surface of magnesium aiming the improvement of the corrosion properties as well as the generation a controlled roughness, which is useful for improving coatings adhesion or tailoring the interactions with living cells at the surface of an implant. In this work, a novel study on the role of the pulse length on topography and corrosion properties of AZ31 magnesium alloy laser-treated surfaces is presented. Three different laser sources with pulse lengths of 20 ns, 800 ps and 266 fs were employed with a similar experimental setup. Surface topography analysis revealed a reduction of the amount of melt generated and an increase in the aspect ratio (depth/width) of the ablated features as the pulse length is reduced. All three treatments significantly improved the corrosion performance of the untreated base material. Thicker and more homogenously distributed recast material for the longer pulses of the nanosecond treatment resulted in a longer-lasting protection (11–12 fold reduction in mass loss rate vs base material) compared to the pico- and femtosecond treatments (4–5 fold reduction), Ministerio de Ciencia e Innovación | Ref. PID2020-117900RB-I00, Ministerio de Ciencia, Innovación y Universidades | Ref. EQC2018-004315-P, Xunta de Galicia | Ref. ED431C 2019/23, Ministerio de Universidades | Ref. FPU16/05492
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Bimetallic Pd/CuO nanoparticles obtained by laser re-irradiation in liquids for antibacterial applications

  • Vilas Iglesias, Ana María
  • Fernández Arias, Mónica
  • Boutinguiza Larosi, Mohamed
  • Rodríguez, Daniel
  • Solla Agra, Eugenio Luis
  • Vilella, Tània
  • Del Val Garcia, Jesús
  • Riveiro Rodríguez, Antonio
  • Gil Castaño, Javier
  • Pou Saracho, Juan María
Antimicrobial resistance (AMR) is considered a major global health problem of the 21st century. Noble metal nanoparticles (NPs) have attracted increasing attention as a promising tool to fight against resistant infections. In this research, we explore bimetallic NPs, as they can give rise to further and improved physicochemical and biological properties. In this work, monometallic Cu/CuO and Pd NPs were synthesized by laser ablation. Afterwards, these NPs were mixed and the resulting colloidal solution was multiply re-irradiated with the aim of producing Pd/CuO bimetallic NPs. All the NPs presented rounded shape and crystalline microstructure. Although the re-irradiated NPs contained both precursor materials, all characterization techniques agreed on the occurrence of an intermetallic alloy of both materials, Cu 3 Pd, that is concluded to be formed as a consequence of the interaction between the laser beam and the mixture of monometallic NPs. With the objective of studying antimicrobial activity against Staphylococcus aureus, the CuO NPs, Pd NPs and Pd/CuO NPs were immobilized on the surface of titanium discs. Ion release was tracked during the first 24 h and cytotoxicity of the immobilized NPs was as well tested with HFF-1 human fibroblast cell line. Bimetallic Pd/CuO NPs showed a significant inhibitory effect on S. aureus and no toxic impact on fibroblasts., Xunta de Galicia | Ref. ED431C 2023/25, Agencia Estatal de Investigación | Ref. PID2020–117900RB-I00, Agencia Estatal de Investigación | Ref. PID2021–125150OB-I00, Agencia Estatal de Investigación | Ref. TED2021-131721B-100, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU21/04488, Agencia Estatal de Investigación | Ref. EQC2018–004315-P, Agencia Estatal de Investigación | Ref. RED2018–102803- T
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Toward damage-tolerant aluminum–steel joints through power-modulated fiber laser welding-brazing

  • Wallerstein Figueirôa, Daniel
  • Calvo Garcia, Erik
  • Solla, Eugenio Luis
  • Lusquiños Rodríguez, Fernando
  • Arias González, Felipe
  • Comesaña Piñeiro, Rafael
  • Salminen, Antti
  • Pou Saracho, Juan María
The development of damage-tolerant aluminum–steel joints is essential for lightweight structural applications exposed to dynamic loading. However, ensuring stable mechanical performance remains challenging due to the brittle nature and heterogeneous morphology of Fe–Al intermetallic compounds that form at the aluminum–steel interface. In this study, square butt joints between 6082 aluminum alloy and S275 structural steel were produced by fiber laser welding-brazing using Al–Si filler wire combined with preplaced Al–Si powder. Constant power (CP) and modulated power (MP) strategies were systematically compared through comprehensive mechanical and microstructural characterization. Power modulation refined the intermetallic morphology, promoted more homogeneous fracture behavior under vibration loading, and shifted fatigue crack initiation away from the aluminum–steel interface, thereby improving the overall damage tolerance of the joints and their suitability for structural applications in lightweight vehicle design. These findings demonstrate that laser power modulation, combined with Si-enriched fillers, offers a practical route to reliable aluminum–steel joints for dynamic service conditions., Agencia Estatal de Investigación | Ref. EQC2018-004315-P, Xunta de Galicia | Ref. ED431C 2023/25
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Palladium nanoparticles synthesized by laser ablation in liquids for antimicrobial applications

  • Fernández Arias, Mónica
  • Vilas Iglesias, Ana María
  • Boutinguiza Larosi, Mohamed
  • Rodríguez, Daniel
  • Arias González, Felipe
  • Pou Álvarez, Pablo
  • Riveiro Rodríguez, Antonio
  • Gil, Javier
  • Pou Saracho, Juan María
Antibiotic resistance is a leading cause of death worldwide. In this paper, we explore new alternatives in the treatment of infections. Noble metal nanoparticles could help to mitigate this problem. In this work, palladium nanoparticles were synthesized by laser ablation in order to explore their antimicrobial capacity. To obtain palladium nanoparticles, a palladium plate immersed in water, or methanol, was ablated, using two pulsed lasers that emit radiation with wavelengths of 532 nm and 1064 nm, respectively. Pure Pd-NPs with crystalline microstructure and rounded shape were obtained. The nanoparticles’ size is more homogeneous if the laser wavelength is 532 nm, and it decreases when methanol is used as solvent, reaching mean diameters smaller than 6 nm. With the objective of studying antimicrobial activity against Staphylococcus aureus, the Pd-NPs were immobilized on the surface of titanium discs. The release of palladium ions was recorded during the first seven days, and the cytotoxicity of the immobilized NPs was also tested with L929 mouse fibroblast cell line. Palladium nanoparticles synthesized by means of the infrared laser in methanol showed a strong inhibitory effect on S. aureus and good cytocompatibility, with no toxic effect on fibroblast cells., Xunta de Galicia | Ref. ED431C 2019/23, Universidad de Vigo | Ref. Beca Margarita Salas, Ministerio de Ciencia e Innovación | Ref. PID2020-117900RB-I00, Ministerio de Ciencia e Innovación | Ref. EQC2018-004315-P, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/05492, Ministerio de Ciencia, Innovación y Universidades | Ref. RED2018-102803- T