Pasar al contenido principal

SUBSTRATO DE RED DE LAS COSAS Y DE DISPOSITIVOS PERIMETRALES INTELIGENTE PARA UN MUNDO DIGITAL SOSTENIBLE

PID2023-146066OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Middleware for distributed applications in a LoRa mesh network

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Baig Viñas, Roger|||0000-0001-9813-7678
Recently, LoRa mesh networks have gained increasing interest as a communication layer for sending data between IoT nodes. However, the network service of the firmware on the microcontroller-based nodes is typically limited to sending and receiving LoRa packets through the LoRa radio. Therefore, the packet processing by the node has to be done using an application-specific implementation. In this article, we present the design and implementation of a middleware that facilitates the development and operation of multiple distributed applications on LoRa mesh network nodes. The components we propose leverage the routing capacity of a LoRa mesh network enabled by the LoRaMesher library and provide a service for applications to send and receive messages from each other. Running several applications concurrently is also supported. We experiment with the middleware implemented in the node firmware with distributed applications that span from the LoRa mesh network to the Internet over MQTT. Our results show the support of bidirectional application-level communication, which can be used to build cross-network distributed applications that integrate services on LoRa mesh network nodes., This work was funded by the Spanish Ministerio de Ciencia Innovación y Universidades through the grant PDC2023-145809-I00/AEI/10.13039/501100011033; and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects); the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU; the Generalitat de Catalunya through the grant 2021-SGR01059., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing the impacts of computer reuse for digital inclusion from product information

  • Roura Salietti, Mireya
  • Navarro Moldes, Leandro|||0000-0003-4775-5526
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Giménez, Sergio
Computer reuse is promoted as a strategy to reduce environmental impact, create local employment, and provide digital access. However, the development of sustainability indicators to inform policy has remained limited. This is due to the lack of empirical data on device lifespans and regional context, which forces Life Cycle Assessment (LCA) practitioners to rely on generic assumptions that limit the accuracy of impact estimations. This study addressed these gaps by developing an LCA-based calculation criterion designed to integrate multiple parameters using device-level data. The criterion is specifically tailored to provisioning scenarios targeting digitally excluded communities and was partially applied using a Dataset and lifespans of 710 refurbished devices from the eReuse initiative in Spain. Three provisioning scenarios (single user, two users with reuse, two users with new devices) were evaluated for Spain and extrapolated to South Africa and Sweden with contrasting electricity mixes to quantify the influence of energy in use. Reuse proved more advantageous than supplying new devices in terms of GWP per hour of digital access, and a one-at-a-time sensitivity analysis showed that the magnitude of this benefit is highly sensitive to device lifespans and electricity emission factors. Future integration of digital product information into LCA is expected to enhance the precision of sustainability indicators used to inform policy., We are grateful to all organisations and community initiatives from eReuse for their time and insights, particularly to David Franquesa and In`edit. This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under project PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU, and by the Department of Research and Universities of the Generalitat de Catalunya under project 2024 IMPAC 00065. The NGI DLT4EU and NGI Policy provided additional support in Practice projects, the Subtract project (Interreg Europe), the Association for Progressive Communications (APC), the Catalan Waste Agency, the Centre for Development Cooperation at Universitat Polit`ecnica de Catalunya, and the Barcelona City Council., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

LoRaMesher: An open-source library for multi-hop LoRa mesh networks

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Baig Viñas, Roger|||0000-0001-9813-7678
LoRaMesher is an open-source C++ library that enables multi-hop mesh networks over LoRa communication on ESP32 microcontroller boards. The library implements a proactive distance-vector routing protocol that maintains routing tables on each node and provides unicast, broadcast, and reliable message delivery, including fragmentation and reassembly for large payloads. LoRaMesher leverages RadioLib for radio access and FreeRTOS for task scheduling, and integrates with PlatformIO for development. By allowing LoRa devices to communicate directly in a mesh network, rather than via LoRaWAN gateways, the library enables fully distributed applications on low-power IoT nodes. This paper describes the LoRaMesher software, its architecture, main functionalities, and usage examples, and discusses its relevance for research and applied IoT deployments., This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under projects PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects and PDC2023-145809-I0 AEI 2023 Knowledge Generation Projects, financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Next-generation wireless backhaul design for rural areas

  • Gemmi, Gabriele
  • Cerdà Alabern, Llorenç|||0000-0002-2799-6173
  • Maccari, Leonardo
Rural areas often face significant challenges in accessing reliable broadband Internet due to high infrastructure costs and low population density. To address this issue, we propose a model for evaluating the performance and the cost of a mesh-based, last- and middle-mile replacement for broadband connection in these underserved regions. We use open data from ten underserved municipalities to assess the demand, plan the mesh network, and estimate the allocated capacity per user. We consider two designs: a low-cost network using the classical 5 GHz unlicensed band, and a high-performance one using mmWave frequency. For both designs, we estimate the Operating Expenditure and the amortized Capital Expenditure using realistic device prices and operating cost estimations. We compare the price of the mesh-based solution with alternatives based on xDSL and satellite connectivity and show that it has competitive prices compared to existing offers, covering a larger portion of households than DSL. We open-source both the code and the elaborated data to reproduce, extend, and improve our results in different settings., Partially funded by the Spanish grants PDC2023- 145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00, and Generalitat de Catalunya through 2021-SGR-01059., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Large and reliable data transfer service for LoRa mesh network applications

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Baig Viñas, Roger|||0000-0001-9813-7678
Recently, LoRa mesh networks have appeared as a communication technology for Internet of Things (IoT) devices. Through node-to-node communication, novel distributed IoT applications that extend beyond the capabilities of the LoRaWAN architecture can be enabled. However, current technologies for LoRa networks do not provide mechanisms for large and reliable data transfers between IoT nodes. This paper presents a service for such data transfers in LoRa mesh network applications, along with the protocol and formats used for inter-node communication. We explain the design choices and detail the implementation decisions to ensure that this service is practically usable. To this end, the service was integrated into the LoRaMesher library and is available as an open-source operational implementation. In experiments with ten real nodes and two network topologies, we observe that the service effectively achieves a large and reliable message delivery in an environment of concurrent transmissions and packet losses. In contrast, the cost of reliability for large data transfers is an increased number of messages and a higher delivery time. With the integration of the service into the LoRaMesher technology, developers now have a library that provides a reliable and large payload service for LoRa mesh network applications, eliminating the need to develop such capacity as a specific application-level solution., This work was funded by the Spanish Ministerio de Ciencia, Innovación Universidades through the grants PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects) MICIU/AEI/10.13039/501100011033/; the Recovery and Resilience Mechanism of the European Union; and by the European Union NextGenerationEU; and the Generalitat de Catalunya, Spain through the grants 2021-SGR-01059; and the Universitat Politècnica de Catalunya, Spain through the grant ALECTORS 0BV05-1. The authors gratefully acknowledge the insightful comments and constructive feedback provided by the anonymous reviewers., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing the impacts of computer reuse for digital inclusion from product information

  • Roura Salietti, Mireya
  • Navarro Moldes, Leandro
  • Meseguer Pallarès, Roc
  • Giménez, Sergio
Computer reuse is promoted as a strategy to reduce environmental impact, create local employment, and provide digital access. However, the development of sustainability indicators to inform policy has remained limited. This is due to the lack of empirical data on device lifespans and regional context, which forces Life Cycle Assessment (LCA) practitioners to rely on generic assumptions that limit the accuracy of impact estimations. This study addressed these gaps by developing an LCA-based calculation criterion designed to integrate multiple parameters using device-level data. The criterion is specifically tailored to provisioning scenarios targeting digitally excluded communities and was partially applied using a Dataset and lifespans of 710 refurbished devices from the eReuse initiative in Spain. Three provisioning scenarios (single user, two users with reuse, two users with new devices) were evaluated for Spain and extrapolated to South Africa and Sweden with contrasting electricity mixes to quantify the influence of energy in use. Reuse proved more advantageous than supplying new devices in terms of GWP per hour of digital access, and a one-at-a-time sensitivity analysis showed that the magnitude of this benefit is highly sensitive to device lifespans and electricity emission factors. Future integration of digital product information into LCA is expected to enhance the precision of sustainability indicators used to inform policy., We are grateful to all organisations and community initiatives from eReuse for their time and insights, particularly to David Franquesa and In`edit. This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under project PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU, and by the Department of Research and Universities of the Generalitat de Catalunya under project 2024 IMPAC 00065. The NGI DLT4EU and NGI Policy provided additional support in Practice projects, the Subtract project (Interreg Europe), the Association for Progressive Communications (APC), the Catalan Waste Agency, the Centre for Development Cooperation at Universitat Polit`ecnica de Catalunya, and the Barcelona City Council., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Middleware for distributed applications in a LoRa mesh network

  • Miquel Solé, Joan
  • Freitag, Fèlix
  • Pueyo Centelles, Roger
  • Meseguer Pallarès, Roc
  • Baig Viñas, Roger
Recently, LoRa mesh networks have gained increasing interest as a communication layer for sending data between IoT nodes. However, the network service of the firmware on the microcontroller-based nodes is typically limited to sending and receiving LoRa packets through the LoRa radio. Therefore, the packet processing by the node has to be done using an application-specific implementation. In this article, we present the design and implementation of a middleware that facilitates the development and operation of multiple distributed applications on LoRa mesh network nodes. The components we propose leverage the routing capacity of a LoRa mesh network enabled by the LoRaMesher library and provide a service for applications to send and receive messages from each other. Running several applications concurrently is also supported. We experiment with the middleware implemented in the node firmware with distributed applications that span from the LoRa mesh network to the Internet over MQTT. Our results show the support of bidirectional application-level communication, which can be used to build cross-network distributed applications that integrate services on LoRa mesh network nodes., This work was funded by the Spanish Ministerio de Ciencia Innovación y Universidades through the grant PDC2023-145809-I00/AEI/10.13039/501100011033; and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects); the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU; the Generalitat de Catalunya through the grant 2021-SGR01059., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Large and reliable data transfer service for LoRa mesh network applications

  • Miquel Solé, Joan
  • Pueyo Centelles, Roger
  • Freitag, Fèlix
  • Meseguer Pallarès, Roc
  • Baig Viñas, Roger
Recently, LoRa mesh networks have appeared as a communication technology for Internet of Things (IoT) devices. Through node-to-node communication, novel distributed IoT applications that extend beyond the capabilities of the LoRaWAN architecture can be enabled. However, current technologies for LoRa networks do not provide mechanisms for large and reliable data transfers between IoT nodes. This paper presents a service for such data transfers in LoRa mesh network applications, along with the protocol and formats used for inter-node communication. We explain the design choices and detail the implementation decisions to ensure that this service is practically usable. To this end, the service was integrated into the LoRaMesher library and is available as an open-source operational implementation. In experiments with ten real nodes and two network topologies, we observe that the service effectively achieves a large and reliable message delivery in an environment of concurrent transmissions and packet losses. In contrast, the cost of reliability for large data transfers is an increased number of messages and a higher delivery time. With the integration of the service into the LoRaMesher technology, developers now have a library that provides a reliable and large payload service for LoRa mesh network applications, eliminating the need to develop such capacity as a specific application-level solution., This work was funded by the Spanish Ministerio de Ciencia, Innovación Universidades through the grants PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects) MICIU/AEI/10.13039/501100011033/; the Recovery and Resilience Mechanism of the European Union; and by the European Union NextGenerationEU; and the Generalitat de Catalunya, Spain through the grants 2021-SGR-01059; and the Universitat Politècnica de Catalunya, Spain through the grant ALECTORS 0BV05-1. The authors gratefully acknowledge the insightful comments and constructive feedback provided by the anonymous reviewers., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Next-generation wireless backhaul design for rural areas

  • Gemmi, Gabriele
  • Cerdà Alabern, Llorenç
  • Maccari, Leonardo
Rural areas often face significant challenges in accessing reliable broadband Internet due to high infrastructure costs and low population density. To address this issue, we propose a model for evaluating the performance and the cost of a mesh-based, last- and middle-mile replacement for broadband connection in these underserved regions. We use open data from ten underserved municipalities to assess the demand, plan the mesh network, and estimate the allocated capacity per user. We consider two designs: a low-cost network using the classical 5 GHz unlicensed band, and a high-performance one using mmWave frequency. For both designs, we estimate the Operating Expenditure and the amortized Capital Expenditure using realistic device prices and operating cost estimations. We compare the price of the mesh-based solution with alternatives based on xDSL and satellite connectivity and show that it has competitive prices compared to existing offers, covering a larger portion of households than DSL. We open-source both the code and the elaborated data to reproduce, extend, and improve our results in different settings., Partially funded by the Spanish grants PDC2023- 145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00, and Generalitat de Catalunya through 2021-SGR-01059., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LoRaMesher: An open-source library for multi-hop LoRa mesh networks

  • Miquel Solé, Joan
  • Freitag, Fèlix
  • Baig Viñas, Roger
LoRaMesher is an open-source C++ library that enables multi-hop mesh networks over LoRa communication on ESP32 microcontroller boards. The library implements a proactive distance-vector routing protocol that maintains routing tables on each node and provides unicast, broadcast, and reliable message delivery, including fragmentation and reassembly for large payloads. LoRaMesher leverages RadioLib for radio access and FreeRTOS for task scheduling, and integrates with PlatformIO for development. By allowing LoRa devices to communicate directly in a mesh network, rather than via LoRaWAN gateways, the library enables fully distributed applications on low-power IoT nodes. This paper describes the LoRaMesher software, its architecture, main functionalities, and usage examples, and discusses its relevance for research and applied IoT deployments., This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under projects PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects and PDC2023-145809-I0 AEI 2023 Knowledge Generation Projects, financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU., Peer Reviewed, Postprint (published version)