Pasar al contenido principal

PRETENSANDO EL UHPC PARA UNA CONSTRUCCION SOSTENIBLE: EL DESAFIO DE LAS ESTRUCTURAS ULTRALIGERAS

PID2023-149364OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nondestructive approach to evaluate strain changes in prestressed concrete by saw-cutting

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] Prestressed concrete members are designed to generate concrete pre-compressive states through the prestressing force. After casting, prestress losses reduce the prestressing force, whose evaluation requires indirect determinations for existing unmonitored members. Pioneer determinations have been made by applying non-destructive methods such as saw-cutting, with limitations related to the use of electric-resistance strain gauges. As an alternative measurement approach, this paper presents a new specific methodology for evaluating concrete strain changes based solely on the use of mechanical strain gauges. The feasibility of the methodology is experimentally assessed through redundant determinations to characterise the behaviour of the Isolated Concrete Block (ICB) generated by saw-cutting a post-tensioned concrete beam. The approach offers a consistent derivation of concrete strain changes and a clear identification of the decompression state. For the selected key parameters of 120 mm distance between the pair of cuts and progressive discretised cut depths until 50 mm, the ICB presented a clear evolutive behaviour and showed full prestress release between 30 and 35 mm cut depth. The robustness of the experimental results obtained from different measurement base lengths demonstrates the viability of the conceived methodology for future applications as a basis for assessing the residual prestressing force., This work forms part of the competitive research projects PID2020-118495RB-I00/AEI/10.13039/501100011033 and PID2023-149364OB-I00/AEI/10.13039/501100011033 and the human resources funding PRE2021-098777/AEI/10.13039/501100011033), all of them funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain, and the competitive research project CIAICO/2022/045 funded by the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Simulation of the Behavior of Reinforced UHPFRC Ties Considering Effects of Tension Stiffening and Shrinkage

  • Mezquida Alcaraz, Eduardo José
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Serna Ros, Pedro|||0000-0001-8754-1165
[EN] Highlights What are the main findings? The developed non-linear finite element model (NLFEM) enables reliable prediction of shrinkage strain range in reinforced UHPFRC ties. The NLFEM reliably reproduces the tension-stiffening behavior of reinforced UHPFRC ties using average parameters derived from a simplified four-point-inverse analysis (4P-IA) method. What is the implication of the main findings? This study aims to develop a reliable and direct design procedure for UHPFRC, ensuring consistency from material characterization to structural application. Shrinkage effects are crucial and must be addressed in the design of reinforced UHPFRC elements under serviceability conditions.Highlights What are the main findings? The developed non-linear finite element model (NLFEM) enables reliable prediction of shrinkage strain range in reinforced UHPFRC ties. The NLFEM reliably reproduces the tension-stiffening behavior of reinforced UHPFRC ties using average parameters derived from a simplified four-point-inverse analysis (4P-IA) method. What is the implication of the main findings? This study aims to develop a reliable and direct design procedure for UHPFRC, ensuring consistency from material characterization to structural application. Shrinkage effects are crucial and must be addressed in the design of reinforced UHPFRC elements under serviceability conditions.Abstract This study presents a reliable methodology for analyzing reinforced ultra-high-performance fiber-reinforced concrete (UHPFRC) elements by linking material behavior to structural performance. A non-linear finite element model (NLFEM) is proposed to simulate the tensile response of reinforced UHPFRC elements, with particular emphasis on shrinkage effects. The model operates in two phases: the first simulates shrinkage during specimen storage and the second simulates the mechanical tensile test, using the internal stresses from the first phase as initial conditions. The model was validated through an experimental program involving reinforced UHPFRC ties. The NLFEM accurately reproduced the load-displacement response using average UHPFRC tensile parameters obtained from a simplified Four-Point bending test Inverse Analysis method (4P-IA). It reliably predicted the shrinkage strain range and its impact on stiffness loss during microcrack initiation and stabilization, where tension-stiffening behavior is critical. Additionally, the simulation from the model captured the transition from microcracking to macrocrack formation and the role of fiber bridging in maintaining stiffness. The predicted shrinkage strain aligns with values reported in the literature and represents a conservative upper bound, neglecting the potential effects of creep and relaxation. Overall, the NLFEM effectively simulates the full tension-stiffening behavior of reinforced UHPFRC, including three-dimensional effects, and provides a reliable tool for structural analysis and design., This work is part of Project PreULight "CIAICO/2022/045", supported by the "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (ES)" and Project PID2023-149364OB-I00/AEI/10.13039/501100011033 funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flexural Behavior of Slender UHPC Prestressed Beams Without Passive Reinforcement

  • Yeiner Andrey
  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Serna Ros, Pedro|||0000-0001-8754-1165
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] This study examines the flexural behavior of slender ultra-high-performance fiber-reinforced concrete (UHPC) beams with cross-sections intended for scalable precast production. The members are prestressed only, with no passive reinforcement. An experimental program on eighteen beams combined three cross-sectional typologies (rectangular as a reference, I-shaped, and H-shaped), three UHPC mixes with fiber contents of 130, 160, and hybrid 130 + 60 kg/m3, and two prestressing layouts (bottom-only and symmetric top-and-bottom). Prestress was indirectly controlled by evaluating effective tendon stress, with time-dependent prestress losses quantified using vibrating-wire strain gauges. Four-point bending tests provided material characterization and structural response, enabling assessment of stiffness and ultimate capacity. The results highlight the coupled influence of cross-section, fiber dosage, and prestress configuration on global response. Post-cracking residual strength in UHPC promoted stable multiple cracking, while prestressing governed deflection control. Residual equivalent flexural tensile stresses above 35 MPa at deflections over 50 mm, span/70, were achieved in I- and H-shaped sections, exceeding those of rectangular sections. Overall, the study substantiates the feasibility of lightweight, durable, prestressed UHPC members that deliver significant self-weight reductions without compromising reliability., This research was funded by Project PreULight "CIAICO/2022/045", supported by the "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (ES)" and Project "PID2023-149364OB-I00/AEI/10.13039/501100011033" funded by the "Agencia Estatal de Investigacion AEI (State Research Agency) of Spain", and "The APC was funded by Project PID2023-149364OB-I00 /AEI/10.13039/501100011033".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methodological strategy for saw-cut testing implementation in prestressed concrete

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] The saw-cut test (SCT) is a non-destructive testing technique based on performing superficial cuts in a prestressed concrete (PC) member aimed at inducing the relief of compressive stresses in the resulting isolated concrete block (ICB). The SCT is suitable in the context of assessing the residual prestressing force in existing unmonitored PC members. However, issues related to the use of electrical resistance-based strain gauges limit their application. To overcome these issues, this paper presents a new methodological strategy focusing on an efficient alternative measurement approach to determine the involved concrete strain changes by the SCT. To this end, three prototypes were tested with the aim of familiarizing with and learning about the SCT, and then a subsequent experimental program including four PC members was carried out to assess the feasibility and reliability of the conceived measurement approach by validating its implementation under conditions of redundancy, reproducibility and repeatability. By the sole use of mechanical extensometry as a measurement technique, the study confirms the viability of consistently characterizing the behavior of an ICB through conforming internal measurement bases of different nominal base lengths within the ICB from measurements taken from external measurement bases to the ICB., The authors would like to thank F.J. Martorell and D. Tasquer for their assistance as technical staff at ICITECH. This study has been carried out in the framework of the competitive research projects PID2023-149364OB-I00/AEI/10.13039/501100011033 and PID2020-118495RB-I00/AEI/10.13039/501100011033 and the predoctoral training contract PRE2021-098777/AEI/10.13039/501100011033), all three granted by the Agencia Estatal de Investigacion (State Research Agency) of Spain, and the competitive research project CIAICO/2022/045 granted by the Generalitat Valenciana. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Saw-cut method for stress-strain assessment in prestressed concrete: Experimental validation and numerical simulation

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
[EN] Prestressed concrete (PC) is used in a wide range of building and civil structures. As these structures approach the end of their in-service life, it is essential to assess their current stress-strain condition. In this study, the effectiveness of the Saw-Cut Test (SCT) as a non-destructive method to estimate residual prestressing forces in PC members is explored. Mechanical strain gauges varying nominal measurement base lengths (NMBLs) are employed, enabling analysis of strain relief across the generated Isolated Concrete Block (ICB). Special attention was given to key parameters such as cut spacing (S) and depth (D). Relative displacements and strain profiles were measured during progressive cutting and compared with numerical model simulations. The findings highlight a symmetric stress relief behavior of the ICB and a strong influence of cut depth in governing the decompression threshold, reached for D = [30¿ 35] mm with S = 120 mm in the unbonded post-tensioned beam tested. The use of multiple NMBLs enhanced measurement reliability. The numerical model accurately reproduces the experimental trends in displacements, with differences below ±0.004 mm. The study confirms that top-surface measurements are sufficient for effective strain change determination, while lateral instrumentation, although informative, was found non-essential. These results support the integration of SCT into broader in-situ assessment campaigns, offering a robust and scalable methodology for assessing residual performance of aging PC structures., This work has been developed at ICITECH laboratories with the financial support of the following competitive research projects funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain: PID2020 118495RB-I00 / AEI / 10.13039/501100011033 and PID2023 149364OB-I00 / AEI / 10.13039/501100011033. Also, with the financial support of the competitive research project CIAICO/2022/ 045, funded by the Generalitat Valenciana (Spain). Regarding human resources support, the first author was granted (PRE2021 098777 / AEI / 10.13039/501100011033) by the Agencia Estatal de Investigacion (State Research Agency) of Spain for his doctoral training. Finally, the authors would like to thank Francisco J. Martorell Romero and Daniel Tasquer Val, who are both part of the technical staff at ICITECH, for their assistance with laboratory tasks. Funding for open access charge: CRUE Universitat Politecnica de Valencia.