Pasar al contenido principal

PRETENSANDO EL UHPC PARA UNA CONSTRUCCION SOSTENIBLE: EL DESAFIO DE LAS ESTRUCTURAS ULTRALIGERAS

PID2023-149364OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nondestructive approach to evaluate strain changes in prestressed concrete by saw-cutting

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] Prestressed concrete members are designed to generate concrete pre-compressive states through the prestressing force. After casting, prestress losses reduce the prestressing force, whose evaluation requires indirect determinations for existing unmonitored members. Pioneer determinations have been made by applying non-destructive methods such as saw-cutting, with limitations related to the use of electric-resistance strain gauges. As an alternative measurement approach, this paper presents a new specific methodology for evaluating concrete strain changes based solely on the use of mechanical strain gauges. The feasibility of the methodology is experimentally assessed through redundant determinations to characterise the behaviour of the Isolated Concrete Block (ICB) generated by saw-cutting a post-tensioned concrete beam. The approach offers a consistent derivation of concrete strain changes and a clear identification of the decompression state. For the selected key parameters of 120 mm distance between the pair of cuts and progressive discretised cut depths until 50 mm, the ICB presented a clear evolutive behaviour and showed full prestress release between 30 and 35 mm cut depth. The robustness of the experimental results obtained from different measurement base lengths demonstrates the viability of the conceived methodology for future applications as a basis for assessing the residual prestressing force., This work forms part of the competitive research projects PID2020-118495RB-I00/AEI/10.13039/501100011033 and PID2023-149364OB-I00/AEI/10.13039/501100011033 and the human resources funding PRE2021-098777/AEI/10.13039/501100011033), all of them funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain, and the competitive research project CIAICO/2022/045 funded by the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Simulation of the Behavior of Reinforced UHPFRC Ties Considering Effects of Tension Stiffening and Shrinkage

  • Mezquida Alcaraz, Eduardo José
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Serna Ros, Pedro|||0000-0001-8754-1165
[EN] Highlights What are the main findings? The developed non-linear finite element model (NLFEM) enables reliable prediction of shrinkage strain range in reinforced UHPFRC ties. The NLFEM reliably reproduces the tension-stiffening behavior of reinforced UHPFRC ties using average parameters derived from a simplified four-point-inverse analysis (4P-IA) method. What is the implication of the main findings? This study aims to develop a reliable and direct design procedure for UHPFRC, ensuring consistency from material characterization to structural application. Shrinkage effects are crucial and must be addressed in the design of reinforced UHPFRC elements under serviceability conditions.Highlights What are the main findings? The developed non-linear finite element model (NLFEM) enables reliable prediction of shrinkage strain range in reinforced UHPFRC ties. The NLFEM reliably reproduces the tension-stiffening behavior of reinforced UHPFRC ties using average parameters derived from a simplified four-point-inverse analysis (4P-IA) method. What is the implication of the main findings? This study aims to develop a reliable and direct design procedure for UHPFRC, ensuring consistency from material characterization to structural application. Shrinkage effects are crucial and must be addressed in the design of reinforced UHPFRC elements under serviceability conditions.Abstract This study presents a reliable methodology for analyzing reinforced ultra-high-performance fiber-reinforced concrete (UHPFRC) elements by linking material behavior to structural performance. A non-linear finite element model (NLFEM) is proposed to simulate the tensile response of reinforced UHPFRC elements, with particular emphasis on shrinkage effects. The model operates in two phases: the first simulates shrinkage during specimen storage and the second simulates the mechanical tensile test, using the internal stresses from the first phase as initial conditions. The model was validated through an experimental program involving reinforced UHPFRC ties. The NLFEM accurately reproduced the load-displacement response using average UHPFRC tensile parameters obtained from a simplified Four-Point bending test Inverse Analysis method (4P-IA). It reliably predicted the shrinkage strain range and its impact on stiffness loss during microcrack initiation and stabilization, where tension-stiffening behavior is critical. Additionally, the simulation from the model captured the transition from microcracking to macrocrack formation and the role of fiber bridging in maintaining stiffness. The predicted shrinkage strain aligns with values reported in the literature and represents a conservative upper bound, neglecting the potential effects of creep and relaxation. Overall, the NLFEM effectively simulates the full tension-stiffening behavior of reinforced UHPFRC, including three-dimensional effects, and provides a reliable tool for structural analysis and design., This work is part of Project PreULight "CIAICO/2022/045", supported by the "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (ES)" and Project PID2023-149364OB-I00/AEI/10.13039/501100011033 funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flexural Behavior of Slender UHPC Prestressed Beams Without Passive Reinforcement

  • Yeiner Andrey
  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Serna Ros, Pedro|||0000-0001-8754-1165
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] This study examines the flexural behavior of slender ultra-high-performance fiber-reinforced concrete (UHPC) beams with cross-sections intended for scalable precast production. The members are prestressed only, with no passive reinforcement. An experimental program on eighteen beams combined three cross-sectional typologies (rectangular as a reference, I-shaped, and H-shaped), three UHPC mixes with fiber contents of 130, 160, and hybrid 130 + 60 kg/m3, and two prestressing layouts (bottom-only and symmetric top-and-bottom). Prestress was indirectly controlled by evaluating effective tendon stress, with time-dependent prestress losses quantified using vibrating-wire strain gauges. Four-point bending tests provided material characterization and structural response, enabling assessment of stiffness and ultimate capacity. The results highlight the coupled influence of cross-section, fiber dosage, and prestress configuration on global response. Post-cracking residual strength in UHPC promoted stable multiple cracking, while prestressing governed deflection control. Residual equivalent flexural tensile stresses above 35 MPa at deflections over 50 mm, span/70, were achieved in I- and H-shaped sections, exceeding those of rectangular sections. Overall, the study substantiates the feasibility of lightweight, durable, prestressed UHPC members that deliver significant self-weight reductions without compromising reliability., This research was funded by Project PreULight "CIAICO/2022/045", supported by the "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (ES)" and Project "PID2023-149364OB-I00/AEI/10.13039/501100011033" funded by the "Agencia Estatal de Investigacion AEI (State Research Agency) of Spain", and "The APC was funded by Project PID2023-149364OB-I00 /AEI/10.13039/501100011033".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Saw-cut testing in prestressed concrete members: methodological contributions for assessing residual prestressing force

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
[ES] La determinación de la fuerza de pretensado residual en elementos de hormigón pretensado existentes sigue siendo una de las principales fuentes de incertidumbre en la evaluación estructural. El pretensado condiciona el comportamiento frente a fisuración, la rigidez, el estado límite de servicio, la durabilidad y la capacidad última, pero su magnitud evoluciona con el tiempo debido a la fluencia y retracción del hormigón y a la relajación de los tendones. Los modelos predictivos basados en el proyecto fueron desarrollados para la verificación en fase de diseño y no están destinados a determinar el estado tensional real in situ décadas después de la construcción. En consecuencia, el nivel de pretensado residual en estructuras envejecidas suele ser desconocido, lo que limita la toma de decisiones basada en criterios de fiabilidad. Esta Tesis Doctoral se centra en una nueva metodología para la evaluación del pretensado residual basada en el Ensayo de Corte con Sierra (Saw-Cut Test, SCT). El SCT induce una liberación localizada de tensiones mediante la ejecución de cortes paralelos dispuestos perpendicularmente a la dirección del pretensado, generando progresivamente un Bloque de Hormigón Aislado (Isolated Concrete Block, ICB). Las variaciones de deformación en el hormigón se miden y, posteriormente, se relacionan con la fuerza de pretensado residual mediante un análisis seccional inverso. Se desarrolla una estrategia de reconstrucción de deformaciones basada en desplazamientos obtenidos mediante extensometría mecánica para evitar interferencias térmicas en los dispositivos de medición y superar las limitaciones asociadas a la longitud de la base de medida. Diferentes Bases Internas de Medida (20-100 mm) permiten una caracterización espacialmente resuelta de los gradientes de deformación, lo que demuestra una redistribución no uniforme de tensiones dentro del ICB. Se valida experimentalmente un Punto de Referencia situado externamente al ICB para separar la traslación rígida a nivel del elemento de la expansión interna a nivel de la zona de corte, garantizando una interpretación no sesgada basada en deformaciones. El procedimiento de ensayo se implementa de forma robusta mediante el control del espaciamiento entre cortes y una progresión incremental de la profundidad de corte. Una campaña experimental sobre 33 vigas de hormigón pretensado con armadura postesa confirma que el SCT implica un proceso de descarga localizada. La modelización mediante elementos finitos, incorporando un comportamiento controlado por descarga, reproduce la redistribución de tensiones dentro del ICB e identifica el estado de descompresión. Tras la normalización de parámetros respecto de la capacidad de descompresión, la liberación de tensiones observada resulta estadísticamente independiente del historial de pretensado y está gobernada principalmente por la profundidad de corte. Una formulación probabilística traduce estos resultados en métricas de decisión basadas en la fiabilidad. Dentro de su dominio validado, el marco metodológico del SCT implementado se confirma como una herramienta fiable y probabilísticamente interpretable para proporcionar datos experimentales de deformación-tensión como base para el diagnóstico del pretensado residual en procesos de evaluación estructural., [EN] The assessment of residual prestressing forces in existing prestressed concrete members remains a major source of uncertainty in structural evaluation. Prestress governs cracking behaviour, stiffness, serviceability, durability, and ultimate capacity, yet its magnitude evolves over time due to concrete creep and shrinkage, and tendon relaxation. Design-based predictive models were developed for project-stage verification and are not intended to determine the actual in-situ stress state decades after construction. Consequently, residual prestress in aging structures is often unknown, limiting reliability-informed decision-making. This Doctoral Thesis focuses on a new methodology for residual prestress assessment based on the Saw-Cut Test (SCT). The SCT induces localized stress relief by performing parallel cuts perpendicular to the prestressing direction, progressively generating an Isolated Concrete Block (ICB). The involved changes in concrete strain are measured and then related to the residual prestressing force through inverse sectional analysis. A displacement-based strain reconstruction strategy using mechanical extensometry is developed to avoid thermal interference in the measuring devices and overcome gauge-length constraints. Different Internal Measurement Bases (20-100 mm) enable spatially resolved characterization of strain gradients, demonstrating non-uniform stress redistribution within the ICB. A Reference Point located externally to the ICB is experimentally validated to separate rigid-body translation at the member level from internal expansion at the cut-zone level, ensuring unbiased strain-based interpretation. The testing procedure is robustly implemented through controlled cut spacing and incremental progression of cut depth. An experimental campaign on 33 post-tensioned, prestressed concrete beams confirms that the SCT involves a localized unloading process. Finite element modelling incorporating unloading-controlled behaviour reproduced stress redistribution within the ICB and identified the decompression state. After normalization of parameters by decompression capacity, the observed stress release becomes statistically independent of prestress history and primarily governed by cut depth. A probabilistic formulation translates these results into reliability-informed decision metrics. Within its validated domain, the implemented SCT framework is confirmed as a reliable, probabilistically interpretable tool for providing experimental strain-stress data as a basis for diagnosing residual prestress in an assessment process., [CA] La determinació de la força de pretensat residual en elements existents de formigó pretensat continua sent una de les principals fonts d'incertesa en l'avaluació estructural. El pretensat condiciona el comportament davant la fissuració, la rigidesa, l'estat límit de servei, la durabilitat i la capacitat última, però la seua magnitud evoluciona amb el temps a causa de la fluència i la retracció del formigó i de la relaxació dels tendons. Els models predictius basats en el projecte van ser desenvolupats per a la verificació en fase de disseny i no estan destinats a determinar l'estat tensional real in situ dècades després de la construcció. En conseqüència, el nivell de pretensat residual en estructures envellides sol ser desconegut, fet que limita la presa de decisions basada en criteris de fiabilitat. Aquesta Tesi Doctoral se centra en una nova metodologia per a l'avaluació del pretensat residual basada en l'Assaig de Tall amb Serra (Saw-Cut Test, SCT). L'SCT indueix una lliberació localitzada de tensions mitjançant l'execució de talls paral·lels perpendiculars a la direcció del pretensat, generant progressivament un Bloc de Formigó Aïllat (Isolated Concrete Block, ICB). Les variacions de deformació en el formigó es mesuren i posteriorment es relacionen amb la força de pretensat residual mitjançant una anàlisi seccional inversa. Es desenvolupa una estratègia de reconstrucció de deformacions basada en desplaçaments mitjançant extensometria mecànica per tal d'evitar interferències tèrmiques en els dispositius de mesura i superar les limitacions associades a la longitud de base de mesura. Diferents Bases Internes de Mesura (20-100 mm) permeten una caracterització espacialment resolta dels gradients de deformació, demostrant una redistribució no uniforme de tensions dins de l'ICB. Es valida experimentalment un Punt de Referència situat externament a l'ICB per separar la translació rígida a nivell de l'element de l'expansió interna a nivell de la zona de tall, garantint una interpretació no esbiaixada basada en deformacions. El procediment d'assaig s'implementa de forma robusta mitjançant un control de l'espaiament entre talls i una progressió incremental de la profunditat de tall. Una campanya experimental sobre 33 bigues de formigó pretensat amd armadures posttesades confirma que l'SCT implica un procés de descàrrega localitzada. La modelització mitjançant elements finits, incorporant un comportament controlat per descàrrega, reprodueix la redistribució de tensions dins de l'ICB i identifica l'estat de descompressió. Després de la normalització de paràmetres respecte de la capacitat de descompressió, l'alliberament de tensions esdevé estadísticament independent de l'historial de pretensat i està governat principalment per la profunditat de tall. Una formulació probabilística tradueix aquests resultats en mètriques de decisió basades en la fiabilitat. Dins del seu domini validat, el marc metodològic de l'SCT implementat es confirma com una eina fiable i probabilísticament interpretable per proporcionar dades experimentals deformació-tensió com a base per al diagnòstic del pretensat residual en processos d'avaluació estructural., This research has been financially supported by the project PREPER — “Looking for the lost prestress: multilevel strategy and non-destructive method for diagnosis of existing prestressed concrete structures” (PID2023149364OB-I00 / AEI / 10.13039/501100011033)—, the project PreUSost — “Prestressing UHPC for sustainable construction: the challenge of ultralight structures” (PID2020-118495RB-I00 / AEI / 10.13039/501100011033)—, and the project PreULight —“UHPC: Opportunity and Challenge for the Design of Ultra-Lightweight Prestressed Concrete Structures” (CIAICO/2022/045), as well as the predoctoral FPI contract (PRE2021098777 / AEI / 10.13039/501100011033), granted by the Spanish State Research Agency (PREPER, PreUSost, and FPI contract) and the Generalitat Valenciana (PreULight). I also gratefully acknowledge the Institute of Concrete Science and Technology (ICITECH) at the Universitat Politècnica de València and the entire PREPER project research team for their contribution to the development of this Doctoral Thesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methodological strategy for saw-cut testing implementation in prestressed concrete

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] The saw-cut test (SCT) is a non-destructive testing technique based on performing superficial cuts in a prestressed concrete (PC) member aimed at inducing the relief of compressive stresses in the resulting isolated concrete block (ICB). The SCT is suitable in the context of assessing the residual prestressing force in existing unmonitored PC members. However, issues related to the use of electrical resistance-based strain gauges limit their application. To overcome these issues, this paper presents a new methodological strategy focusing on an efficient alternative measurement approach to determine the involved concrete strain changes by the SCT. To this end, three prototypes were tested with the aim of familiarizing with and learning about the SCT, and then a subsequent experimental program including four PC members was carried out to assess the feasibility and reliability of the conceived measurement approach by validating its implementation under conditions of redundancy, reproducibility and repeatability. By the sole use of mechanical extensometry as a measurement technique, the study confirms the viability of consistently characterizing the behavior of an ICB through conforming internal measurement bases of different nominal base lengths within the ICB from measurements taken from external measurement bases to the ICB., The authors would like to thank F.J. Martorell and D. Tasquer for their assistance as technical staff at ICITECH. This study has been carried out in the framework of the competitive research projects PID2023-149364OB-I00/AEI/10.13039/501100011033 and PID2020-118495RB-I00/AEI/10.13039/501100011033 and the predoctoral training contract PRE2021-098777/AEI/10.13039/501100011033), all three granted by the Agencia Estatal de Investigacion (State Research Agency) of Spain, and the competitive research project CIAICO/2022/045 granted by the Generalitat Valenciana. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Saw-cut method for stress-strain assessment in prestressed concrete: Experimental validation and numerical simulation

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
[EN] Prestressed concrete (PC) is used in a wide range of building and civil structures. As these structures approach the end of their in-service life, it is essential to assess their current stress-strain condition. In this study, the effectiveness of the Saw-Cut Test (SCT) as a non-destructive method to estimate residual prestressing forces in PC members is explored. Mechanical strain gauges varying nominal measurement base lengths (NMBLs) are employed, enabling analysis of strain relief across the generated Isolated Concrete Block (ICB). Special attention was given to key parameters such as cut spacing (S) and depth (D). Relative displacements and strain profiles were measured during progressive cutting and compared with numerical model simulations. The findings highlight a symmetric stress relief behavior of the ICB and a strong influence of cut depth in governing the decompression threshold, reached for D = [30¿ 35] mm with S = 120 mm in the unbonded post-tensioned beam tested. The use of multiple NMBLs enhanced measurement reliability. The numerical model accurately reproduces the experimental trends in displacements, with differences below ±0.004 mm. The study confirms that top-surface measurements are sufficient for effective strain change determination, while lateral instrumentation, although informative, was found non-essential. These results support the integration of SCT into broader in-situ assessment campaigns, offering a robust and scalable methodology for assessing residual performance of aging PC structures., This work has been developed at ICITECH laboratories with the financial support of the following competitive research projects funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain: PID2020 118495RB-I00 / AEI / 10.13039/501100011033 and PID2023 149364OB-I00 / AEI / 10.13039/501100011033. Also, with the financial support of the competitive research project CIAICO/2022/ 045, funded by the Generalitat Valenciana (Spain). Regarding human resources support, the first author was granted (PRE2021 098777 / AEI / 10.13039/501100011033) by the Agencia Estatal de Investigacion (State Research Agency) of Spain for his doctoral training. Finally, the authors would like to thank Francisco J. Martorell Romero and Daniel Tasquer Val, who are both part of the technical staff at ICITECH, for their assistance with laboratory tasks. Funding for open access charge: CRUE Universitat Politecnica de Valencia.