Pasar al contenido principal

DISEÑO EFICIENTE DE SISTEMAS DE CONTROL EN RED INALAMBRICA APLICADOS A UXVS UTILIZANDO TECNICAS DE CONTROL CON MUESTREO NO CONVENCIONAL Y BASADAS EN EVENTOS.

PRE2019-088467

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control synthesis of nonholonomic mobile robots under time-varying delays and input saturation: experimental validation.

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • Carbonell-Lázaro, Rafael|||0000-0002-2573-5041
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
[EN] This paper presents a new control synthesis methodology for nonholonomic mobile robots subjected to time-varying delays and input saturation constraints. The proposed control method is based on smooth static nonlinear functions, leading to a simpler structure than other available control strategies for this class of systems. In addition, the convergence to a certain target position with guaranteed exponential decay rate can be proved for any orientation error. To this end, a nonlinear Lyapunov-Krasovskii functional has specifically been designed to deal with the inherent discontinuity of the kinematics model as well as the presence of time-varying delays. Thus, the control design can efficiently be addressed by means of Linear Matrix Inequalities (LMIs). Finally, the effectiveness of the proposed control design algorithm is validated through simulation and experimentally using a two-wheeled mobile robot., This work was supported in part by MCIN/AEI/10.13039/501100011033 under Grant PID2020-116585GB-I00 and Grant PRE2019-088467, in part by ESF Investing in Your Future, and in part by Vicerrectorado de Investigación de la Universitat Politècnica de València under Grant PAID-11-23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Remote path-following control for a holonomic Mecanum-wheeled robot in a resource-efficient networked control system

  • Carbonell-Lázaro, Rafael|||0000-0002-2573-5041
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Casanova Calvo, Vicente|||0000-0002-7040-4815
  • Aranda-Escolástico, Ernesto
[EN] This paper introduces a novel resource-efficient control structure for remote path-following control of autonomous vehicles based on a comprehensive combination of Kalman filtering, non-uniform dual-rate sampling, periodic event-triggered communication, and prediction-based and packet-based control techniques. An essential component of the control solution is a non-uniform dual-rate extended Kalman filter (NUDREKF), which includes an h-step ahead prediction stage. The prediction error of the NUDREKF is ensured to be exponentially mean-square bounded. The algorithmic implementation of the filter is straightforward and triggered by periodic event conditions. The main goal of the approach is to achieve efficient usage of resources in a wireless networked control system (WNCS), while maintaining satisfactory path-following behavior for the vehicle (a holonomic Mecanum-wheeled robot). The proposal is additionally capable of coping with typical drawbacks of WNCS such as time-varying delays, and packet dropouts and disorder. A Simscape Multibody simulation application reveals reductions of up to 93% in resource usage compared to a nominal time-triggered control solution. The simulation results are experimentally validated in the holonomic Mecanum-wheeled robotic platform., This work was supported by Grant PRE2019-088467 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future", and by the Spanish State Research Agency under Project PID2020-112658RB-I00/AEI/10.13039/501100011033 and by the UNED under Project 2021V/-TAJOV/001.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual-Rate Extended Kalman Filter Based Path-Following Motion Control for an Unmanned Ground Vehicle: Realistic Simulation

  • Carbonell-Lázaro, Rafael|||0000-0002-2573-5041
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Casanova Calvo, Vicente|||0000-0002-7040-4815
  • Pizá, Ricardo|||0000-0001-8261-0045
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
[EN] In this paper, a two-wheel drive unmanned ground vehicle (UGV) path-following motion control is proposed. The UGV is equipped with encoders to sense angular velocities and a beacon system which provides position and orientation data. Whereas velocities can be sampled at a fast rate, position and orientation can only be sensed at a slower rate. Designing a dynamic controller at this slower rate implies not reaching the desired control requirements, and hence, the UGV is not able to follow the predefined path. The use of dual-rate extended Kalman filtering techniques enables the estimation of the fast-rate non-available position and orientation measurements. As a result, a fast-rate dynamic controller can be designed, which is provided with the fast-rate estimates to generate the control signal. The fast-rate controller is able to achieve a satisfactory path following, outperforming the slow-rate counterpart. Additionally, the dual-rate extended Kalman filter (DREKF) is fit for dealing with non-linear dynamics of the vehicle and possible Gaussian-like modeling and measurement uncertainties. A Simscape Multibody (TM) (Matlab(R)/Simulink) model has been developed for a realistic simulation, considering the contact forces between the wheels and the ground, not included in the kinematic and dynamic UGV representation. Non-linear behavior of the motors and limited resolution of the encoders have also been included in the model for a more accurate simulation of the real vehicle. The simulation model has been experimentally validated from the real process. Simulation results reveal the benefits of the control solution., Grant RTI2018-096590-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF Away of making Europe" and Grant PRE2019-088467 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nonuniform Dual-Rate Extended Kalman-Filter-Based Sensor Fusion for Path-Following Control of a Holonomic Mobile Robot with Four Mecanum Wheels

  • Pizá, Ricardo|||0000-0001-8261-0045
  • Carbonell-Lázaro, Rafael|||0000-0002-2573-5041
  • Casanova Calvo, Vicente|||0000-0002-7040-4815
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
[EN] This paper presents an extended Kalman-filter-based sensor fusion approach, which enables path-following control of a holonomic mobile robot with four mecanum wheels. Output measurements of the mobile platform may be sensed at different rates: odometry and orientation data can be obtained at a fast rate, whereas position information may be generated at a slower rate. In addition, as a consequence of possible sensor failures or the use of lossy wireless sensor networks, the presence of the measurements may be nonuniform. These issues may degrade the path-following control performance. The consideration of a nonuniform dual-rate extended Kalman filter (NUDREKF) enables us to estimate fast-rate robot states from nonuniform, slow-rate measurements. Providing these estimations to the motion controller, a fast-rate control signal can be generated, reaching a satisfactory path-following behavior. The proposed NUDREKF is stated to represent any possible sampling pattern by means of a diagonal matrix, which is updated at a fast rate from the current, existing measurements. This fact results in a flexible formulation and a straightforward algorithmic implementation. A modified Pure Pursuit path-tracking algorithm is used, where the reference linear velocity is decomposed into Cartesian components, which are parameterized by a variable gain that depends on the distance to the target point. The proposed solution was evaluated using a realistic simulation model, developed with Simscape Multibody (Matlab/Simulink), of the four-mecanum-wheeled mobile platform. This model includes some of the nonlinearities present in a real vehicle, such as dead-zone, saturation, encoder resolution, and wheel sliding, and was validated by comparing real and simulated behavior. Comparison results reveal the superiority of the sensor fusion proposal under the presence of nonuniform, slow-rate measurements., Grant RTI2018-096590-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and Grant PRE2019-088467 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".