Pasar al contenido principal

EN BUSCA DEL PRETENSADO PERDIDO: ESTRATEGIA MULTINIVEL Y METODO NO DESTRUCTIVO PARA DIAGNOSTICO DE ESTRUCTURAS DE HORMIGON EXISTENTES

PRE2021-098777

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study on the Stresses Released in a Notched, Postensioned Concrete Beam

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Gimenez-Carbo, Ester|||0000-0002-2856-4081
  • Serna Ros, Pedro|||0000-0001-8754-1165
  • Castro-Bugallo, M Carmen|||0000-0001-9201-6162
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] Structural prestressed concrete elements (SPCE) face uncertainties in accurately assessing the actual prestressing force. Over time, the initial prestressing force decreases due to several factors. Incorrect estimation of prestress losses can lead to design inefficiencies or structural issues. Monitoring the prestressing force can be achieved through instrumentation during casting, but existing SPCE lack such devices, necessitating indirect methods to determine prestressing force variations. This study focuses on analyzing stresses released in a notched post tensioned concrete beam using the saw cutting technique. Surface notches induce local decompression, allowing for strain measurements in the isolated concrete block. These measurements, considering uncertainties in initial prestress and material properties, are analyzed through backward calculations. The findings enhance understanding of saw cutting and enable future applications to determine effective prestressing force in unmonitored SPCE. Further experimental studies are required to explore prestressing force consistency under monitored conditions. This research provides valuable insights into the potential of the saw cutting technique as a non destructive testing method for assessing prestressing force in unmonitored SPCE. Accurately determining the prestressing force is crucial for evaluating existing SPCE and ensuring their structural integrity., This work forms part of the Project Looking for the lost prestress: multilevel strategy and non-destructive method for diagnosis of existing concrete structures funded by the Agencia Estatal de Investigación (State Research Agency) of Spain (competitive research project PID2020-118495RB-I00 / AEI / 10.13039/501100011033 and human resources funding PRE2021-098777 / AEI / 10.13039/501100011033). The authors would also like to thank the ICITECH technical staff, Francisco J. Martorell Romero and Daniel Tasquer Val, for their valuable contributions and involvement in the development of the experimental work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nondestructive approach to evaluate strain changes in prestressed concrete by saw-cutting

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] Prestressed concrete members are designed to generate concrete pre-compressive states through the prestressing force. After casting, prestress losses reduce the prestressing force, whose evaluation requires indirect determinations for existing unmonitored members. Pioneer determinations have been made by applying non-destructive methods such as saw-cutting, with limitations related to the use of electric-resistance strain gauges. As an alternative measurement approach, this paper presents a new specific methodology for evaluating concrete strain changes based solely on the use of mechanical strain gauges. The feasibility of the methodology is experimentally assessed through redundant determinations to characterise the behaviour of the Isolated Concrete Block (ICB) generated by saw-cutting a post-tensioned concrete beam. The approach offers a consistent derivation of concrete strain changes and a clear identification of the decompression state. For the selected key parameters of 120 mm distance between the pair of cuts and progressive discretised cut depths until 50 mm, the ICB presented a clear evolutive behaviour and showed full prestress release between 30 and 35 mm cut depth. The robustness of the experimental results obtained from different measurement base lengths demonstrates the viability of the conceived methodology for future applications as a basis for assessing the residual prestressing force., This work forms part of the competitive research projects PID2020-118495RB-I00/AEI/10.13039/501100011033 and PID2023-149364OB-I00/AEI/10.13039/501100011033 and the human resources funding PRE2021-098777/AEI/10.13039/501100011033), all of them funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain, and the competitive research project CIAICO/2022/045 funded by the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of single and twin notches in prestressed concrete beams

  • Bauset-Tortonda, I.
  • Mateu-Sánchez, J.A.
  • Serna, Pedro
  • Gimenez-Carbo, Ester|||0000-0002-2856-4081
  • Castro-Bugallo, M Carmen|||0000-0001-9201-6162
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
[EN] Main codes and standards offer sufficient provisions for the prestressing design of prestressed concrete members (PCMs). The designer must set the prestressing force and estimate the prestressing losses, so that the PCM meets its requirements over its service life. In addition, PCM can be instrumented during casting (e.g. vibrating wire strain gauges, magneto-elastic devices ¿) with the aim of measuring parameters of interest for a real-time monitoring in service in a direct manner. In particular, a key parameter is the residual prestressing force at each time. However, there are many PCMs, which were cast without instrumentation, and consequently, the residual prestressing force can only be estimated indirectly. In these cases, additional complexity must be considered in relation to the initial prestress, the materials properties, their evolution, and the accounted short- and long-term prestress losses. Regarding the indirect methods, they can be both destructive and non-destructive, the last including cases of reduced local damage susceptible of aesthetic restitution. A recent and promising non-destructive testing method is based on performing surface notches by saw-cutting the concrete. The key idea is to measure changes in stress/strain of the concrete accounted for after each introduced notch. Subsequently, a complex post-analysis is required to estimate the residual prestressing force. Consequently, this paper focuses on the analysis of the effect of single and twin notches in prestressed concrete beams when the prestressing force is known. In this way, the information obtained may be used to simplify the corresponding post-analysis in the case of existing PCMs tested without direct control of the prestressing force. A finite element model to account for the effect of single and twin notches in PCMs is implemented. The main variables included in this numerical modelling have been: cross-section dimensions, eccentricity of the prestressing reinforcement, single notch or twin notches, notch depth, distance between each pair of notches, and length of basis for obtention of displacements between the corresponding nodes. Curves [average longitudinal stress dissipation] versus [notch depth] for several combinations of variables can be reproduced, which will serve to a better understanding of the testing technique and may help to protocolize the aforementioned post-analysis by calibrating curves suitable for case studies with unknown prestressing force., This work forms part of the Project Looking for the lost prestress: multi-level strategy and non-destructive method for diagnosis of existing concrete structures funded by the Agencia Estatal de Investigación (State Research Agency) of Spain (competitive research project PID2020-118495RB-I00 and human resources funding PRE2021-098777).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methodological strategy for saw-cut testing implementation in prestressed concrete

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] The saw-cut test (SCT) is a non-destructive testing technique based on performing superficial cuts in a prestressed concrete (PC) member aimed at inducing the relief of compressive stresses in the resulting isolated concrete block (ICB). The SCT is suitable in the context of assessing the residual prestressing force in existing unmonitored PC members. However, issues related to the use of electrical resistance-based strain gauges limit their application. To overcome these issues, this paper presents a new methodological strategy focusing on an efficient alternative measurement approach to determine the involved concrete strain changes by the SCT. To this end, three prototypes were tested with the aim of familiarizing with and learning about the SCT, and then a subsequent experimental program including four PC members was carried out to assess the feasibility and reliability of the conceived measurement approach by validating its implementation under conditions of redundancy, reproducibility and repeatability. By the sole use of mechanical extensometry as a measurement technique, the study confirms the viability of consistently characterizing the behavior of an ICB through conforming internal measurement bases of different nominal base lengths within the ICB from measurements taken from external measurement bases to the ICB., The authors would like to thank F.J. Martorell and D. Tasquer for their assistance as technical staff at ICITECH. This study has been carried out in the framework of the competitive research projects PID2023-149364OB-I00/AEI/10.13039/501100011033 and PID2020-118495RB-I00/AEI/10.13039/501100011033 and the predoctoral training contract PRE2021-098777/AEI/10.13039/501100011033), all three granted by the Agencia Estatal de Investigacion (State Research Agency) of Spain, and the competitive research project CIAICO/2022/045 granted by the Generalitat Valenciana. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Saw-cut method for stress-strain assessment in prestressed concrete: Experimental validation and numerical simulation

  • Mateu-Sánchez, Juan Antonio|||0000-0001-6351-5886
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
[EN] Prestressed concrete (PC) is used in a wide range of building and civil structures. As these structures approach the end of their in-service life, it is essential to assess their current stress-strain condition. In this study, the effectiveness of the Saw-Cut Test (SCT) as a non-destructive method to estimate residual prestressing forces in PC members is explored. Mechanical strain gauges varying nominal measurement base lengths (NMBLs) are employed, enabling analysis of strain relief across the generated Isolated Concrete Block (ICB). Special attention was given to key parameters such as cut spacing (S) and depth (D). Relative displacements and strain profiles were measured during progressive cutting and compared with numerical model simulations. The findings highlight a symmetric stress relief behavior of the ICB and a strong influence of cut depth in governing the decompression threshold, reached for D = [30¿ 35] mm with S = 120 mm in the unbonded post-tensioned beam tested. The use of multiple NMBLs enhanced measurement reliability. The numerical model accurately reproduces the experimental trends in displacements, with differences below ±0.004 mm. The study confirms that top-surface measurements are sufficient for effective strain change determination, while lateral instrumentation, although informative, was found non-essential. These results support the integration of SCT into broader in-situ assessment campaigns, offering a robust and scalable methodology for assessing residual performance of aging PC structures., This work has been developed at ICITECH laboratories with the financial support of the following competitive research projects funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain: PID2020 118495RB-I00 / AEI / 10.13039/501100011033 and PID2023 149364OB-I00 / AEI / 10.13039/501100011033. Also, with the financial support of the competitive research project CIAICO/2022/ 045, funded by the Generalitat Valenciana (Spain). Regarding human resources support, the first author was granted (PRE2021 098777 / AEI / 10.13039/501100011033) by the Agencia Estatal de Investigacion (State Research Agency) of Spain for his doctoral training. Finally, the authors would like to thank Francisco J. Martorell Romero and Daniel Tasquer Val, who are both part of the technical staff at ICITECH, for their assistance with laboratory tasks. Funding for open access charge: CRUE Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of prestressing in old full-scale concrete members

  • Mateu-Sánchez, J.A.
  • Serna, Pedro
  • Castro-Bugallo, M Carmen|||0000-0001-9201-6162
  • Gimenez-Carbo, Ester|||0000-0002-2856-4081
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] The effective prestressing force is a key parameter that affects the performance of prestressed concrete members (PCM). In fact, the accurate determination of the residual prestressing force is crucial to assess existing PCM since it influences load-carrying capacities, in-service structural properties and remaining service life. The aging of structures, with limited functional capacity, implies a major problem that must be addressed without delay. Progress in the promotion of innovative solutions to extend the service life of structures depends on: (a) the availability of reliable indirect methods, since old PCM were usually no instrumented during casting; (b) the formulation of adequate diagnostics of the residual stress¿strain state of structures; and (c) the availability of highly refined predictive tools. The implementation of these elements in the management and maintenance systems of PCM will serve to support decision making associated with structural assessment and to gather information to establish criteria for the design of more resilient PCM. Among the destructive methods available to empirically assess the actual condition of PCM, it can be found: crack initiation, crack re-opening and tendon cutting. As destructive methods inevitably cause structural damage and are not suitable for application to in-service structures, non-destructive methods or with conditions that only require aesthetic restitution (e.g. exposed tendon deformation, hole-drilling and saw-cuts) appear as an alternative of increasing interest. As a first step to obtain feed-back from several experimental tests carried out on unmonitored full-scale PCM over the years, this paper examines different techniques and methods used to evaluate the residual prestressing force, and also presents the deviations and uncertainties regarding predictions of short- and long-term prestress losses from main code models used in design. It is concluded that it is interesting to follow a non-destructive indirect testing methodology to be able to keep in service and monitor the current structures. This would make it possible to draw up a maintenance plan based on the condition of the PCM., This work forms part of the Project Looking for the lost prestress: multi-level strategy and non-destructive method for diagnosis of existing concrete structures funded by the Agencia Estatal de Investigación (State Research Agency) of Spain (competitive research project PID2020-118495RB-I00 and human resources funding PRE2021-098777).