Pasar al contenido principal

INTERACCION MACROFAGOS-OSTEOBLASTOS-CONDROCITOS EN LA INTERFAZ COCR FUNCIONALIZADO CON OXIDO DE GRAFENO REDUCIDO PARA OPTIMIZACION DE PROTESIS ARTICULARES: EFECTO DEL DESGASTE

RTI2018-101506-B-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of degradation products of iron-bioresorbable implants on the physiological behavior of macrophages in vitro

  • Fagali, Natalia S.
  • Madrid, Marcos A.
  • Pérez-Maceda, B. T.
  • López-Fernández, M.E.
  • Lozano, R.M.
  • Fernández Lorenzo de Mele, Mónica
24 p.-7 fig. (In memory of Dr Blanca Teresa Perez-Maceda whose lovely life, plenty of fortitude, unwavering strength, joy and spiritual values, we had the honour of sharing.), The degradation of bioresorbable metals in vivo changes the physicochemical properties in the environment of an implant, such as a stent in the artery wall, and may induce the alteration of the functions of the surrounding cells. The Fe-degradation, from bioresorbable stents, is a particularly intricate process because it leads to the release of soluble (SDP) and insoluble degradation products(IDP) of varied composition. Macrophages are involved in the resorption of the exogenous agents coming from degradation of these materials. In the present work an Fe0 ring, made with a pure Fe wire,in contact with macrophage cell cultures was used to simulate the behaviour of a biodegradable Fe-based implant in a biological environment. Non-invasive time-lapse optical microscopy was applied to obtain images of macrophages exposed to Fe-degradation products, without using staining to avoid distortions and artefacts. It was noticed that as metal degraded, the IDP formed in situ accumulated close to the Fe0 ring. In this zone, the macrophages showed a dynamic process of uptake of dark Fe-containing products, confirmed by SEM-EDX. These macrophages showed alterations in the morphology and decrease in the motility and viability. The inability of the macrophages to move and to degrade the engulfed products caused a long persistence of IDP in the zone closest to the metal. The deleterious effects of IDP accumulated close to the ring, were significantly worse than those observed in the experiments made with (1) concentrated salt solutions (Fe3+ salt 3 mM), with the same amount of precipitates but uniformly distributed in the well, and (2) diluted salt solutions (Fe3+ salt 1 mM) with mainly soluble species. The results were confirmed by standard staining protocols that revealed dead cells close to the Fe0 ring and oxidative stress in cells exposed to both soluble and insoluble species., CONICET (P-UE 22920170100100CO), ANPCyT (PICT 2015-0232, PICT 2016-1424), UNLP(11/I221), MICINN (MAT2011-29152-C02-02), MINECO (MAT2015-67750-C3-2-R), RTI2018-101506-B-C33., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Corrosion Behaviour and J774A.1 Macrophage Response to Hyaluronic Acid Functionalization of Electrochemically Reduced Graphene Oxide on Biomedical Grade CoCr

  • Chico, Belén
  • Pérez-Maceda, B. T.
  • San José-Pinilla, Sara
  • Escudero Rincón, María Lorenza
  • García-Alonso, M. C.
  • Lozano, R.M.
Improvements in the lubrication of metal¿metal joint prostheses are of great clinical interest in order to minimize the particles released during wear¿corrosion processes. In this work, electrochemically reduced graphene oxide (ErGO) on CoCr was functionalized with hyaluronic acid (ErGOHA). Functionalization was carried out by soaking for 24 h in phosphate buffer saline (PBS) solution containing 3 g/L hyaluronic acid (HA). The corrosion performance of CoCrErGO and CoCrErGOHA surfaces was studied by electrochemical impedance spectroscopy (EIS) for 7 days in PBS. Biocompatibility and cytotoxicity were studied in mouse macrophages J774A.1 cell line by the measurement of mitochondrial activity (WST-1 assay) and plasma membrane damage (LDH assay). The inflammatory response was examined through TNF-¿ and IL-10 cytokines in macrophages culture supernatants, used as indicators of pro-inflammatory and anti-inflammatory responses, respectively. EIS diagrams of CoCrErGOHA revealed two time constants: the first one, attributed to the hydration and diffusion processes of the HA layer adsorbed on ErGO, and the second one, the corrosion resistance of ErGOHA/CoCr interface. Macrophage assays showed better behavior on CoCrErGOHA than CoCr and CoCrErGO surfaces based on their biocompatible, cytotoxic, and inflammatory responses. Comparative analysis of IL-10 showed that functionalization with HA induces higher values of anti-inflammatory cytokine, suggesting an improvement in inflammatory behavior., Financial support received through the RTI2018-101506-B-C31 and RTI2018-101506-B-C33 from the Ministerio de Ciencia, Innovación y Universidades (MICIU/FEDER), and through the MAT2015-67750-C3-2-R, MAT2015-67750-C3-1-R from the Ministerio de Economía y Competitividad (MINECO/FEDER) from Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wettability, corrosion resistance, and osteoblast response to reduced graphene oxide on CoCr functionalized with hyaluronic acid

  • Chico, Belén
  • Pérez-Maceda, B. T.
  • San José-Pinilla, Sara
  • Escudero Rincón, María Lorenza
  • García-Alonso, M. C.
  • Lozano, R.M.
14 p.-8 fig.-2 tab. Blanca Teresa Pérez-Maceda who participated actively in this research with great enthusiasm has passed away., The durability of metal–metal prostheses depends on achieving a higher degree of lubrication. The beneficial effect of hyaluronic acid (HA) on the friction and wear of both natural and artificial joints has been reported. For this purpose, graphene oxide layers have been electrochemically reduced on CoCr surfaces (CoCrErGO) and subsequently functionalized with HA (CoCrErGOHA). These layers have been evaluated from the point of view of wettability and corrosion resistance in a physiological medium containing HA. The wettability was analyzed by contact angle measurements in phosphate buffer saline-hyaluronic acid (PBS-HA) solution. The corrosion behavior of functionalized CoCr surfaces was studied with electrochemical measurements. Biocompatibility, cytotoxicity, and expression of proteins related to wound healing and repair were studied in osteoblast-like MC3T3-E1 cell cultures. All of the reported results suggest that HA-functionalized CoCr surfaces, through ErGO layers in HA-containing media, exhibit higher hydrophilicity and better corrosion resistance. Related to this increase in wettability was the increase in the expressions of vimentin and ICAM-1, which favored the growth and adhesion of osteoblasts. Therefore, it is a promising material for consideration in trauma applications, with improved properties in terms of wettability for promoting the adhesion and growth of osteoblasts, which is desirable in implanted materials used for bone repair, Financial support is received through the RTI2018-101506-B-C31 and RTI2018-101506-B-C33 from the Ministerio de Ciencia, Innovación (MICINN/FEDER), and through the MAT2015-67750-C3-2-R, MAT2015-67750-C3-1-R from the Ministerio de Economía y Competitividad (MINECO/FEDER) from Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Covalent immobilization of graphene oxide on biomedical grade CoCr alloy by an improved multilayer system assembly via Silane/GO bonding

  • Sánchez-López, Luna
  • Chico, Belén
  • Llorente, Irene
  • Escudero Rincón, María Lorenza
  • Lozano, R.M.
  • García-Alonso, M. C.
Improvements in durable lubrication together with minimized wear are essential for obtaining long-term, functioning metallic joint prostheses. To achieve this objective, CoCr surface was functionalized with Graphene Oxide (GO) and characterized by FTIR and XPS. CoCr alloy was subjected to alkalinization in order to generate high hydroxyl content on the surface. FTIR and XPS revealed reactive OH groups, enabling intermediate coupling via (3-aminopropyl) triethoxysilane (APTES), which was cured at 45 °C and 75 °C for 24 h and 30 min, respectively. FTIR revealed cross-linked films (Si–O–Si), inferring condensation and self-assembly of silane layers, while XPS revealed the presence of NH, enabling chemical binding of GO. Silane-coated CoCr disks were immersed in GO solution at 60 °C for 12h and 24h, respectively. FTIR displayed C[dbnd]C band confirming the assembly of GO on silane-coated CoCr surfaces. XPS revealed three possible surface mechanisms: (1) reaction between primary amines of APTES and epoxy groups of GO; (2) free –OH groups in APTES and carboxyl groups in GO; and (3) reaction between APTES primary amines and –OH from carboxyl groups of GO. Overall, the multilayer system CoCr–OH–Si45-GO24h showed covalent functionalization of metal substrate with GO to a large extension of surface area among all the multilayer systems studied., This work was supported through RTI2018-101506-B-C31 and RTI2018-101506-B-C33 from the Ministerial de Ciencia, Innovación y Universidades (MICIU/FEDER).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Barrier Graphene Oxide on a CoCr Alloy via Silane/GO Covalent Bonding and Its Electrochemical Behavior in a Simulated Synovial Fluid Electrolyte

  • Sánchez-López, Luna
  • Chico, Belén
  • Escudero Rincón, María Lorenza
  • Lozano, R.M.
  • García-Alonso, M. C.
In this work, impermeable and ultrathin surface nanomodifications for joint applications based on graphene oxide (GO) are assembled on CoCr surfaces via covalent immobilization between GO nanosheets and silane monolayers. Two silane curing temperatures, 45 °C for 24 h and 75 °C for 30 min, on CoCr surfaces and two incubation times for GO suspension, 12 h and 24 h, on silanized CoCr surfaces are prepared. Electrochemical characterization is performed using electrochemical impedance spectroscopy (EIS) in a 3 g/L hyaluronic acid solution. Results show that GO nanosheets immobilized with silane covalent bonding confer impermeability of sp2 networks on GO and strong interfacial adhesion of GO sheets anchored to silanized CoCr via organosilane chemistry, which prevents the permeation of oxidant species at the metal interface. At short GO incubation times (12 h), the Rs values decrease with the immersion time, indicating that small species, such as metal ions, are able to diffuse through the interlayer gaps of nanolayers. Longer GO incubation times (24 h) favor the formation of bonds between the GO and the silane, thus slowing downdiffusion and metal ion release into the medium. EIS data confirm the impermeability of GO nanocoatings with lengthening GO incubation time for medical application of metallic implants., Grant RTI2018-101506-B-C31 and RTI2018-101506-B-C33 were funded by Ministerio de Ciencia e Innovación, MCIN/AEI/10.13039/501100011033/, and “ERDF A way of making Europe”. Grant PRE2019-090122 was funded by Ministerio de Ciencia e Innovación, MCIN/AEI/10.13039/501100011033/and “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of wear-corrosion of reduced graphene oxide functionalized with hyaluronic acid on inflammatory and proteomic response of J774A.1 macrophages

  • Sánchez-López, Luna
  • Ropero de Torres, N.
  • Chico, Belén
  • Fagali, Natalia S.
  • Ríos, Vivian de los
  • Escudero Rincón, María Lorenza
  • García-Alonso, M. C.
  • Lozano, R.M.
The presence of a worn surface in the implanted material, as in the case of a replacement of a damaged osteoarticular joint, is the normal condition after implantation. This manuscript focuses precisely on the comparative study of the cellular behavior on worn CoCr surfaces, analyzing the effect of different surface modifications on macrophages¿ responses. CoCr surfaces were modified by the deposition of electrochemically reduced graphene oxide (CoCrErGO), followed by additional surface functionalization with hyaluronic acid (CoCrErGOHA). After the wear corrosion processes, the macrophage response was studied. In addition, macrophage supernatants exposed to the surfaces, before and after wear, were also evaluated for osteoblast response through the analysis of the metabolic activity, plasma membrane damage, and phosphatase alkaline activity (ALP). The proteomic analysis and the quantitative TNF-¿/IL-10 ratios of the J774A.1 macrophages exposed to the surfaces under study showed a polarization shift from M0 (basal state) to M1, associated with the pro-inflammatory response of all surfaces. A lower M1 polarization was observed upon exposure to the surface modification with ErGO, whereas posterior HA functionalization attenuated, even more, the M1 polarization. The wear corrosion process contributed to inflammation and exacerbated the M1 polarization response on macrophages to CoCr, which was diminished for the ErGO and attenuated the most for the ErGOHA surfaces. Comparative proteomics showed that the pathways related to M1 polarization were downregulated on the surfaces of CoCrErGOHA, which suggests mechanisms for the observed attenuation of M1 polarization. The suitable immuno-modulatory potential induced by the ErGOHA surface, with and without wear, together with the stimulation of ALP activity in osteoblasts induced by macrophage supernatants, promotes the mineralization processes necessary for bone repair. This makes it feasible to consider the adsorption of ErGOHA on CoCr as a recommended surface treatment for the use of biomaterials in osseous joint applications., Financial support was received through the RTI2018-101506-B-C31 and RTI2018-101506-B-C33 from the Ministerio de Ciencia, Innovación y Universidades (MICIU/FEDER) in Spain. L. Sánchez-López thanks financial support from MICIU for the predoctoral contract PRE2019-090122. ANPCyT (PICT 2019-0631), CONICET (PIP 112-201501-00601CO and External Grant for Young Researchers for N.S.F.) and UNLP (11/X900)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tribocorrosion behavior of graphene-based solid lubricants biofunctionalized with hyaluronic acid on CoCr surfaces

  • García-Alonso, M. C.
  • Chico, Belén
  • Lozano, R.M.
  • Escudero Rincón, María Lorenza
In this work graphene-based solid lubricants biofunctionalized with hyaluronic acid were deposited on CoCr surfaces to decrease wear-corrosion phenomena. Graphene oxide was electrochemically reduced on CoCr in an aqueous suspension of graphene oxide 4 g/L by cyclic voltammetry. Biofunctionalization in phosphate buffer solution with HA 3 g/L (PBS-HA) for 24 h was performed. A pin-on-disk tribometer with an integrated cell was used for tribocorrosion tests. Wear-corrosion tests were performed against AISI316 steel balls applying normal load 1 N, 120 rpm for 500 m, in PBS and PBS-HA. Coefficients of friction in PBS were higher than in PBS-HA. ErGO and HA-ErGO increased wear rate in AISI316 balls, i.e., ErGO hardens the CoCr surface. Bio- functionalization reduces abrasive properties of ErGO deposits., Funding: This work was supported by the Spanish Ministry of Science, Innovation and Universities [RTI2018–101506-B-C31, RTI2018–101506-B-C33]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Macrophage proteomic analysis of covalent immobilization ofhyaluronic acid and graphene oxide on CoCr alloy in atribocorrosive environment

  • Sánchez-López, Luna
  • Chico, Belén
  • García-Alonso, M. C.
  • Lozano, R.M.
19 p.-10 fig.-2 tab., In this work, a sequential covalent immobilization of graphene oxide (GO) and hyaluronic acid (HA) is performed to obtain a biocompatible wear-resistant nanocoating on the surface of the biomedical grade cobalt-chrome (CoCr) alloy. Nanocoated CoCr surfaces were characterized by Raman spectroscopy and electrochemical impedance spectroscopy (EIS) in 3 g/L HA electrolyte. Tribocorrosion tests of the nanocoated CoCr surfaces were carried out in a pin on flat tribometer. The biological response of covalently HA/GO biofunctionalized CoCr surfaces with and without wear-corrosion processes was studied through the analysis of the proteome of macrophages. Raman spectra revealed characteristic bands of GO and HA on the functionalized CoCr surfaces. The electrochemical response by EIS showed a stable and protective behavior over 23 days in the simulated biological environment. HA/GO covalently immobilized on CoCr alloy is able to protect the surface and reduce the wear volume released under tribocorrosion tests. Unsupervised classification analysis of the macrophage proteome via hierarchical clustering and principal component analysis (PCA) revealed that the covalent functionalization on CoCr enhances the macrophage biocompatibility in vitro. On the other hand, disruption of the HA/GO nanocoating by tribocorrosion processes induced a macrophage proteome which was differently clustered and was distantly located in the PCA space. In addition, tribocorrosion induced an increase in the percentage of upregulated and downregulated proteins in the macrophage proteome, revealing that disruption of the covalent nanocoating impacts the macrophage proteome. Although macrophage inflammation induced by tribocorrosion of HA/GO/CoCr surfaces is observed, it is ameliorated by the covalently grafting of HA, which provides immunomodulation by eliciting downregulations in characteristic pro-inflammatory signaling involved in inflammation and aseptic loosening of CoCr joint arthroplasties. Covalent HA/GO nanocoating on CoCr provides potential applications for in vivo joint prostheses led a reduced metal-induced inflammation and degradation by wear-corrosion., This wok was supported by RTI2018-101506-B-C31 and RTI2018-101506-B-C33 from the Ministerio de Ciencia, Innovación y Universidades (MICIU/FEDER) in Spain. Author L. Sánchez-López has received financial support from MICIU for the predoctoral contract PRE2019-090122, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hematological Response to Particle Debris Generated During Wear–Corrosion Processes of CoCr Surfaces Modified with Graphene Oxide and Hyaluronic Acid for Joint Prostheses

  • Escudero Rincón, María Lorenza
  • García-Alonso, M. C.
  • Chico, Belén
  • Lozano, R.M.
  • Sánchez-López, Luna
  • Flores-Sáenz, Manuel
  • Cristóbal-Aguado, Soledad
  • Moreno-Gómez-Toledano, Rafael
  • Aguado-Henche, Soledad
Various surface modifications to increase the lifespan of cobalt–chromium (CoCr) joint prostheses are being studied to reduce the wear rate in bone joint applications. One recently proposed modification involves depositing graphene oxide functionalized with hyaluronic acid (a compound present in joints) on CoCr surfaces, which can act as a solid lubricant. This paper analyzes the biological alterations caused by wear–corrosion phenomena that occur in joints, both from the perspective of the worn surface (in vitro model) and the particles generated during the wear processes (in vivo model). The analysis of the inflammatory response of macrophage was performed on CoCr surfaces modified with graphene oxide and functionalized with hyaluronic acid (CoCr-GO-HA), before and after wear–corrosion processes. The wear particles released during the wear–corrosion tests of the CoCr-GO-HA/CoCr ball pair immersed in 3 g/L hyaluronic acid were intra-articularly injected into the experimental animals. The hematological analysis in vivo was made considering a murine model of intra-articular injection into the left knee in male adult Wistar rats, at increasing concentrations of the collected wear particles dispersed in 0.9% NaCl. Non-significant differences in the inflammatory response to unworn CoCr-GO-HA surfaces and control (polystyrene) were obtained. The wear–corrosion of the CoCr-GO-HA disk increased the inflammatory response at both 72 and 96 h of material exposure compared to the unworn CoCr-GO-HA surfaces, although the differences were not statistically significant. The pro-inflammatory response of the macrophages was reduced on the worn surfaces of the CoCr modified and functionalized with graphene oxide (GO) and hyaluronic acid (HA), compared to the worn surfaces of the unmodified CoCr. The hematological analysis and tissue reactions after intra-articular injection did not reveal pathological damage, with average hematological values recorded, although slight reductions in creatinine and protein within non-pathological ranges were found. Some traces of biomaterial particles in the knee at the highest concentration of injected particles were only found but without inflammatory signs. The results show the potential benefits of using graphene in intra-articular prostheses, which could improve the quality of life for numerous patients., This wok was supported by RTI2018-101506-B-C31, RTI2018-101506-B-C32 and RTI2018-101506-B-C33 projects funded by MCIN/AEI/10.13039/501100011033/ from Ministerio de Ciencia, Innovación y Universidades and by “ERDF A way of making Europe”. Grant PRE2019-090122 was funded by MCIN/AEI/10.13039/501100011033/ from Ministerio de Ciencia, Innovación y Universidades and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Potential Application of AZ31-Mg(OH)2/CeO2 as Temporary Medical Implants: Evaluation of the Corrosion Resistance and Biocompatibility Properties

  • Onofre-Bustamante, E.
  • Lozano, R.M.
  • Escudero Rincón, María Lorenza
  • Spíndola-Flores, Ana
  • Benito-Santiago, Sandra
Magnesium-based alloys are considered to be promising materials for the fabrication of temporary bone repair medical implants. The AZ31 magnesium-based (AZ31-Mg) alloy contains 3% aluminum and 1% zinc in its microstructure, which gives it mechanical strength and corrosion resistance. Nonetheless, the corrosion rate is high, which can lead to implant failure due to rapid degradation, which triggers the release of harmful metal ions. In the present work, a passive layer was obtained on the AZ31-Mg alloy, and subsequently, a cerium oxide (CeO2) coating was deposited through a chemical conversion treatment using 0.01 M CeO2 as a precursor. Based on X-ray photoelectron spectroscopy, the calculated amount of Ce(IV) and Ce(III) present in AZ31-Mg(OH)2/CeO2 was 93.6% and 6.4%, respectively. AZ31-Mg(OH)2/CeO2 showed improved corrosion resistance compared with the bare sample. The in vitro assessment of MC3T3-E1 pre-osteoblast cell viability showed that AZ31-Mg(OH)2/CeO2 was biocompatible after incubation for 24 and 72 h. The results revealed that the CeO2 coating confers greater electrochemical stability and biocompatibility properties, mostly due to the presence of Ce4+ ions., This research was supported by Secretaría de Ciencia, Humanindades, Tecnología e Innovación (SECIHTI) Science grant, (SIP project 20253511 and 20250589) through Instituto Politécnico Nacional. Financial support was also obtained from ICOOP 2021 (Ref COOPA20479) of Consejo Superior de Investigaciones Científicas (CSIC, Spain) and by RTI2018-101506-B-C33 from the Ministerio de Ciencia, Innovación y Universidades (MICIU/FEDER) in Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Past, Present, and Future of Fe-Mg Bioresorbable Alloys for Medical Applications

  • Estrada, Rafael Guillermo
  • Fagali, Natalia S.
  • Multigner, Marta
  • Lieblich, Marcela
The search for biocompatible and bioabsorbable metallic materials for temporary medical implants dates back to the late nineteenth century. Interest in these materials arises from their potential social and medical benefits. However, extensive research did not start until the early twentieth century, primarily focusing on magnesium (Mg), iron (Fe), and zinc (Zn) as biocompatible and biodegradable base metals. In this work, we explore the combination of two of these metals, Fe and Mg, and the opportunity to investigate Fe-Mg alloys as potential candidates for biomedical applications through a review of their development from their initial production to the present, as well as their future prospects. A distinctive characteristic of Fe-Mg systems is their mutual immiscibility in thermodynamic equilibrium, which poses significant processing challenges and explains why Fe-Mg alloys have been relatively unexplored. However, it is precisely this immiscibility that offers the opportunity to achieve a metastable state that potentiates degradation. As evidenced by the review of recent research on bioabsorbable Fe-Mg alloys developed specifically for biomedical applications, given their promising properties and potential applications, a more comprehensive exploration of this alloy system appears warranted., Grant PID2022-139323NB-I00, PRE2020-092118 (R.E.), PID2021-123891OB-I00 funded by MCIN/AEI/ https://doi.org/10.13039/501100011033, RTI2018-101506-B-C33 by MICIU/FEDER Spain. CONICET [PIP 2021 11220200100315CO]; ANPCyT [PICT 2019-00631, PICT-2020-02169, PICT Start Up 2020-0034]; and UNLP [Project 11/X900].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Past, Present, and Future of Fe-Mg Bioresorbable Alloys for Medical Applications

  • Estrada, Rafael Guillermo
  • Fagali, Natalia S.
  • Multigner, Marta
  • Lieblich, Marcela
The search for biocompatible and bioabsorbable metallic materials for temporary medical implants dates back to the late nineteenth century. Interest in these materials arises from their potential social and medical benefits. However, extensive research did not start until the early twentieth century, primarily focusing on magnesium (Mg), iron (Fe), and zinc (Zn) as biocompatible and biodegradable base metals. In this work, we explore the combination of two of these metals, Fe and Mg, and the opportunity to investigate Fe-Mg alloys as potential candidates for biomedical applications through a review of their development from their initial production to the present, as well as their future prospects. A distinctive characteristic of Fe-Mg systems is their mutual immiscibility in thermodynamic equilibrium, which poses significant processing challenges and explains why Fe-Mg alloys have been relatively unexplored. However, it is precisely this immiscibility that offers the opportunity to achieve a metastable state that potentiates degradation. As evidenced by the review of recent research on bioabsorbable Fe-Mg alloys developed specifically for biomedical applications, given their promising properties and potential applications, a more comprehensive exploration of this alloy system appears warranted., Grant PID2022-139323NB-I00, PRE2020-092118 (R.E.), PID2021-123891OB-I00 funded by MCIN/AEI/ https://doi.org/10.13039/501100011033, RTI2018-101506-B-C33 by MICIU/FEDER Spain. CONICET [PIP 2021 11220200100315CO]; ANPCyT [PICT 2019-00631, PICT-2020-02169, PICT Start Up 2020-0034]; and UNLP [Project 11/X900].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradation, cytotoxicity, and antibacterial properties of Fe-Mg powders in simulated body fluids

  • Estrada, Rafael Guillermo
  • Fagali, Natalia Soledad
  • Multigner, Marta
  • Lozano, R.M.
  • Pacha-Olivenza, Miguel
  • González-Martín, María Luisa
  • Lieblich, Marcela
Bioabsorbable metals offer great promise for temporary medical implants. Among them, iron (Fe) and magnesium (Mg) alloys are of particular interest due to their biocompatibility, mechanical properties, and degradation behavior. However, Fe degrades too slowly, while Mg degrades too quickly. Combining both elements has been proposed to overcome these drawbacks, though their immiscibility presents a processing challenge. In this study, Fe-5 wt% Mg powder was produced via high-energy ball milling (Fe5Mg-BM), and its degradation was compared with pure Fe (Fe99) and milled Fe (Fe-BM). In vitro degradation was evaluated in three simulated body fluids: phosphate-buffered saline (PBS), modified Hanks' balanced salt solution (HBSS), and Dulbecco's Modified Eagle Medium (DMEM). Ion release, pH changes, and degradation products were characterized, along with cytotoxicity and antibacterial activity. The results showed that Fe5Mg-BM exhibited accelerated degradation compared to Fe99 and Fe-BM. Among the media, modified HBSS induced the greatest diversity and quantity of degraded compounds. Ion analysis revealed negligible iron release in PBS and HBSS, with the highest levels in DMEM for Fe5Mg-BM. Magnesium release followed the trend: PBS < DMEM < HBSS. Fe5Mg-BM showed limited cytotoxicity at 3 days and enhanced antibacterial activity in PBS and HBSS compared to Fe-BM. These results indicate that the biological effects arise from complex interactions at the material interface and the solubility of degradation products, suggesting that Mg is a promising alloying element for enhancing the performance of Fe-based materials in biomedical applications., Grant PID2022–139323NB-I00, PRE2020–092118 (R.E.), PID2022–140422OB-I00, PID2021–123891OB-I00 funded by MCIN/AEI/ 10.13039/501100011033, Spain. Thanks are due to the Laboratory of x-ray diffraction and of Electron Microscopy of CENIM-CSIC. RTI2018–101506-B-C33 by MICIU/FEDER and FEDER “Una manera de hacer Europa”; GR24043 supported by Government of Extremadura, Project Action VI by UEX. Microbiology measurements were performed by the ICTS “NANBIOSIS,” specifically by the U16 Unit: “Surface Characterization and Bacterial Colonization” of the CIBER in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN) located at the University of Extremadura in Badajoz (Spain). CONICET (External Fellowship of NSF, PIP 2021 11220200100315CO), ANPCyT (PICT 2019–0631, PICT Start Up 2020–0034, PICT 2020–02169), UNLP (11/X900)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Macrophage proteome modulation induced by tribocorrosion of graphene oxide-hyaluronic acid-coated CoCr surfaces

  • Sánchez-López, Luna
  • Chico, Belén
  • García-Alonso, M. C.
  • Lozano, R.M.
Hip and knee implant components, such as femoral bearings, acetabulum liners, and stem taper junctions are subjected to mechanical stresses and undergo electrochemical processes that compromise their functionality. Cobalt-chromium (CoCr) alloys are widely used as implants owing to their excellent mechanical properties, corrosion resistance, and biocompatibility. However, they are susceptible to simultaneous surface processes of wear and corrosion, known as tribocorrosion, which reduce their longevity and impact their performance. Our group has developed covalent multifunctional nanocoatings of graphene oxide (GO) and hyaluronic acid (HA) on CoCr surfaces providing chemical protection, reducing inflammatory response and enhancing wear-corrosion resistance. However, when the GO/HA nanocoating is disrupted by tribocorrosion, as takes place underin vivoconditions, macrophages, crucial cells for inflammation and healing, could exhibit a significantly different proteome. For this purpose, CoCr modified GO/HA surfaces were configured in a tribometer to simulate tribocorrosion of CoCrMo/CoCrMo joint implants, and the biological effects were studied in murine macrophages and analyzed via high-throughput proteomics. Simulated tribocorrosion testing revealed that metal degradation activates phagocytosis and increases endo-lysosomal membrane proteins, indicating enriched phagosomal compartment formation in macrophages. Additionally, macrophage exposure to worn CoCr-modified surfaces activates metal sensitization mechanisms and antigen presentation, leading to macrophage activation and polarization., This work was funded by the Ministerio de Ciencia, Innovación y Universidades (MICIU), Spain, with co-funding from the European Regional Development Fund (FEDER), through grants RTI2018-101506-B-C31 and RTI2018-101506-B-C33. Luna Sánchez-López has received financial support from MICIU for the predoctoral contract (PRE2019-090122)., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Hematological Response to Particle Debris Generated During Wear-Corrosion Processes of CoCr Surfaces Modified with Graphene Oxide and Hyaluronic Acid for Joint Prostheses

  • Escudero, María L.
  • García Alonso, María C.
  • Chico, Belén
  • Lozano, Rosa M.
  • Sánchez López, Luna
  • Flores Sáenz, Manuel
  • Cristobal Aguado, Soledad|||0009-0006-5199-9557
  • Moreno Gómez-Toledano, Rafael Felipe|||0000-0002-4834-289X
  • Aguado Henche, Salud Soledad|||0000-0003-2188-3618
Various surface modifications to increase the lifespan of cobalt–chromium (CoCr) joint prostheses are being studied to reduce the wear rate in bone joint applications. One recently proposed modification involves depositing graphene oxide functionalized with hyaluronic acid (a compound present in joints) on CoCr surfaces, which can act as a solid lubricant. This paper analyzes the biological alterations caused by wear–corrosion phenomena that occur in joints, both from the perspective of the worn surface (in vitro model) and the particles generated during the wear processes (in vivo model). The analysis of the inflammatory response of macrophage was performed on CoCr surfaces modified with graphene oxide and functionalized with hyaluronic acid (CoCr-GO-HA), before and after wear–corrosion processes. The wear particles released during the wear–corrosion tests of the CoCr-GO-HA/CoCr ball pair immersed in 3 g/L hyaluronic acid were intra-articularly injected into the experimental animals. The hematological analysis in vivo was made considering a murine model of intra-articular injection into the left knee in male adult Wistar rats, at increasing concentrations of the collected wear particles dispersed in 0.9% NaCl. Non-significant differences in the inflammatory response to unworn CoCr-GO-HA surfaces and control (polystyrene) were obtained. The wear–corrosion of the CoCr-GO-HA disk increased the inflammatory response at both 72 and 96 h of material exposure compared to the unworn CoCr-GO-HA surfaces, although the differences were not statistically significant. The pro-inflammatory response of the macrophages was reduced on the worn surfaces of the CoCr modified and functionalized with graphene oxide (GO) and hyaluronic acid (HA), compared to the worn surfaces of the unmodified CoCr. The hematological analysis and tissue reactions after intra-articular injection did not reveal pathological damage, with average hematological values recorded, although slight reductions in creatinine and protein within non-pathological ranges were found. Some traces of biomaterial particles in the knee at the highest concentration of injected particles were only found but without inflammatory signs. The results show the potential benefits of using graphene in intra-articular prostheses, which could improve the quality of life for numerous patients., Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación