Pasar al contenido principal

TELEDETECCION MULTI-SENSOR Y MULTI-ESCALA: SENSORES Y APLICACIONES

TEC2017-85244-C2-1-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combining SfM Photogrammetry and Terrestrial Laser Scanning to Assess Event-Scale Sediment Budgets along a Gravel-Bed Ephemeral Stream

  • Conesa-García, Carmelo
  • Puig-Mengual, Carlos
  • Riquelme, Adrián
  • Tomás, Roberto
  • García-Lorenzo, Rafael
  • Pastor, José L.
  • Pérez-Cutillas, Pedro
  • Cano Gonzalez, Miguel
  • Martinez-Capel, Francisco|||0000-0003-4991-0251
[EN] Stream power represents the rate of energy expenditure along a stream reach and can be calculated using topographic data acquired via structure-from-motion (SfM) photogrammetry and terrestrial laser scanning (TLS). This study sought to quantitatively relate morphological adjustments in the Azohia Rambla, a gravel-bed ephemeral stream in southeastern Spain, to stream power (omega), critical power (omega(c)), and energy gradients ( partial differential omega/ partial differential s), along different reference channel reaches of 200 to 300 m in length. High-resolution digital terrain models (HRDTMs), combined with ortophotographs and point clouds from 2018, 2019, and 2020, and ground-based surveys, were used to estimate the spatial variability of morphological sediment budgets and to assess channel bed mobility during the study period at different spatial scales: reference channel reaches (RCRs), pilot bed survey areas (PBSAs), and representative geomorphic units (RGUs). The optimized complementary role of the SfM technique and terrestrial laser scanning allowed the generation of accurate and reliable HRDTMs, upon which a 1-D hydrodynamic model was calibrated and sediment budgets calculated. The resulting high-resolution maps allowed a spatially explicit analysis of stream power and transport efficiency in relation to volumes of erosion and deposition in the RCR and PBSA. In addition, net incision or downcutting and vertical sedimentary accretion were monitored for each flood event in relation to bedforms and hydraulic variables. Sediment sources and sinks and bed armoring processes showed different trends according to the critical energy and stream power gradient, which were verified from field observations. During flows exceeding bankfull discharges (between 18 and 24 m(3) s(-1) according to channel reach), significant variations in partial differential omega/ partial differential s values and omega/omega(c) ratios (e.g., -15 < partial differential omega/ partial differential s < 15 Wm(-3); omega/omega(c) > 2 for a peak discharge of 31 m(3) s(-1)) were associated with a large amount of bedload mobilized upstream and vertical accretion along the middle reach (average rise height of 0.20 to 0.35 m for the same event). By contrast, more moderate peak flows (<= 10 m(3) s(-1)) only produced minor changes resulting in surface washing, selective transport, and local bed scouring., This research was funded by ERDF/Spanish Ministry of Science, Innovation and Universities-State Research Agency/Project CGL2017-84625-C2-1-R (CCAMICEM); State Program for Research, Development and Innovation Focused on the Challenges of Society, the Spanish Ministry of Economy and Competitiveness (MINECO) and EU FEDER under Project TEC2017-85244-C2-1-P and by the University of Alicante (vigrob-157 and GRE18-05).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluación de la estabilidad de taludes rocosos a partir de nubes de puntos 3D obtenidas con un vehículo aéreo no tripulado, Evaluation of the stability of rocky slopes using 3D point clouds obtained from an unmanned aerial vehicle

  • Tomás, R.
  • Riquelme, A.
  • Cano, M.
  • Pastor, J. L.
  • Pagán, J. I.
  • Asensio, J. L.
  • Ruffo, M.
[ES] En este trabajo se describe una metodología propuesta para la identificación semiautomática de discontinuidades y el posterior análisis cinemático y de estabilidad a través de su aplicación a una trinchera excavada en roca de una línea de ferrocarril. La adquisición de imágenes se ha llevado a cabo mediante un vehículo aéreo no tripulado de seis rotores para su posterior restitución fotogramétrica a través de la técnica digital Structure from Motion (SfM) mediante el programa Agisoft Metashape que proporciona una nube de puntos 3D. A partir de esta nube de puntos, se han identificado cuatro familias de discontinuidades (J1, J2, J3 y J4) que afectan al talud haciendo uso del programa de código abierto Discontinuity Set Extractor (DSE). Finalmente, se han llevado a cabo análisis cinemáticos y de estabilidad de las posibles roturas de bloques a favor de las discontinuidades identificadas en el talud. Los resultados muestran tres potenciales roturas por cuña y una plana que han sido validadas cualitativamente mediante el análisis de la geometría de las nubes de puntos., [EN] In this work, a methodology proposed for the semiautomatic identification of discontinuities and the later kinematic and stability analyses is described through its application to a rocky railway line cutting. Image acquisition has been performed using a six-rotors unmanned aerial vehicle for their subsequent photogrammetric restitution by means of the digital technique Structure from Motion (SfM) by means of the software Agisoft Metashape that provides a 3D point cloud. From this 3D point cloud, four discontinuity sets (J1, J2, J3 and J4) affecting the cutting have been identified using the open source software Discontinuity Set Extractor (DSE). Finally, kinematic and stability analyses of the potential block failures controlled by the discontinuities identified in the cutting. The results show three potential wedge and planar failures that have been qualitatively validated trough the geometric analysis of the 3D point cloud., Este trabajo se ha realizado en el marco del proyecto MOMIT, recibiendo financiación de Shift2Rail Joint Undertaking perteneciente al programa de investigación e innovación H2020 de la Unión Europea a través de la subvención No 777630, del proyecto de la Universidad de Alicante GRE18-05 y del proyecto TEC2017-85244-C2-1-P del Ministerio de Economía y Competitividad (MINECO) y EU FEDER. Los autores quieren dar las gracias a José Miguel García Torres (Geotor S.L.) por la fotografía del UAV incluida en la Figura 1.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suitability Assessment of X-Band Satellite SAR Data for Geotechnical Monitoring of Site Scale Slow Moving Landslides

  • Bru, Guadalupe
  • Escayo, Joaquin
  • Fernández Torres, José
  • Mallorquí Franquet, Jordi Joan
  • Iglesias, Rubén
  • Sansosti, Eugenio
  • Abajo, Tamara
  • Morales, Antonio
This work addresses the suitability of using X-band Synthetic Aperture Radar (SAR) data for operational geotechnical monitoring of site scale slow moving landslides, affecting urban areas and infrastructures. The scale of these studies requires high resolution data. We propose a procedure for the practical use of SAR data in geotechnical landslides campaigns, that includes an appropriate dataset selection taking into account the scenario characteristics, a visibility analysis, and considerations when comparing advanced differential SAR interferometry (A-DInSAR) results with other monitoring techniques. We have determined that Sentinel-2 satellite optical images are suited for performing high resolution land cover classifications, which results in the achievement of qualitative visibility maps. We also concluded that A-DInSAR is a very powerful and versatile tool for detailed scale landslide monitoring, although in combination with other instrumentation techniques., This work was financially supported by the Spanish Ministerio de Economía y Competitividad (MINECO) research projects IPT-2011-1234-310000, ESP2013-47780-C2-1-R, and RTC-2014-1922-5. Research by RI and JJM has been also supported by the Big Risk project (contract number BIA2008-06614) and by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), the State Research Agency (AEI) and the European Funds for Regional Development (EFRD) under project TEC2017-85244-C2-1-P. CommSensLab is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring TanDEM-X Interferometric Products for Crop-Type Mapping

  • Busquier, Mario
  • López-Sánchez, Juan M.
  • Mestre-Quereda, Alejandro
  • Navarro, Elena
  • González-Dugo, María P.
  • Mateos, Luciano
This article belongs to the Special Issue Feature-Based Methods for Remote Sensing Image Classification., The application of satellite single-pass interferometric data to crop-type mapping is demonstrated for the first time in this work. A set of nine TanDEM-X dual-pol pairs of images acquired during its science phase, from June to August 2015, is exploited for this purpose. An agricultural site located in Sevilla (Spain), composed of fields of 13 different crop species, is employed for validation. Sets of input features formed by polarimetric and interferometric observables are tested for crop classification, including single-pass coherence and repeat-pass coherence formed by consecutive images. The backscattering coefficient at HH and VV channels and the correlation between channels form the set of polarimetric features employed as a reference set upon which the added value of interferometric coherence is evaluated. The inclusion of single-pass coherence as feature improves by 2% the overall accuracy (OA) with respect to the reference case, reaching 92%. More importantly, in single-pol configurations OA increases by 10% for the HH channel and by 8% for the VV channel, reaching 87% and 88%, respectively. Repeat-pass coherence also improves the classification performance, but with final scores slightly worse than with single-pass coherence. However, it improves the individual performance of the backscattering coefficient by 6–7%. Furthermore, in products evaluated at field level the dual-pol repeat-pass coherence features provide the same score as single-pass coherence features (overall accuracy above 94%). Consequently, the contribution of interferometry, both single-pass and repeat-pass, to crop-type mapping is proved., This work was funded by the Spanish Ministry of Science and Innovation, the State Agency of Research (AEI) and the European Funds for Regional Development (EFRD) under Project TEC2017-85244-C2-1-P, and by the European Commission, H2020 Programme, under Project MOSES (Managing crOp water Saving with Enterprise Services).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Canopy Height Estimation in Mediterranean Forests of Spain with TanDEM-X Data

  • Gómez, Cristina
  • López-Sánchez, Juan M.
  • Romero-Puig, Noelia
  • Zhu, Jianjun
  • Fu, Haiqiang
  • Ze, Wenjie
  • Xie, Yanzhou
  • Xie, Qinghua
Centro de Investigación Forestal (CIFOR), Canopy height is an essential feature in forest inventory, and for the assessment of biomass and carbon budgets. Spatially explicit maps of forest height over large areas can be derived from satellite synthetic aperture radar data. We aimed to evaluate the capacity of TanDEM-X (TDX) data to assess canopy height in Mediterranean forests of Spain, which are of relatively short height (typically < 20 m), diverse in species and structure, and adapted to summer drought. Interferogram coherence was retrieved from single-pol image pairs. Forest height estimation was carried out by previously fitting a sinc-type function, with two empirical parameters, to the data measured. Six types of forest were defined to assess the convenience of stratification for model implementation. The influence of terrain slope, forest type, and interferometric baseline on model performance was evaluated, and a strategy for large area mapping was proposed and tested. TDX-derived heights were compared to a contemporaneous LiDAR-derived canopy height model for assessment of quality. Results limited to slopes below 10° provided the best results, reaching R2 = 0.91 and root-mean-square error = 1.24 m in one of the study sites. However, in some areas the results were much worse, especially in regions characterized by rugged terrain with broadleaved species. This work demonstrates the feasibility of deriving a forest height map over the entire area of Spain from TDX data. Stratification per slope interval and selection of long interferometric baselines are recommended., This work was supported in part by the Spanish Ministry of Science, Innovation, and University and EU EFDR funds under Project TEC2017-85244-C2-1-P, and in part by the National Natural Science Foundation of China under Grant 41820104005, Grant 41804004, and Grant 41904004. The work of Cristina Gómez was supported under Project FORESTCHANGE (AGL2016-76769-C2-1-R) German Aerospace Center (DLR) provided all the TanDEM-X data under Project OTHER7349, Peer reviewed, 10 Pág
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mapping the global threat of land subsidence

  • Herrera García, Gerardo
  • Ezquerro Martín, Pablo
  • Tomás, Roberto
  • Béjar Pizarro, Marta
  • López-Vinielles, Juan
  • Rossi, Mauro
  • Mateos Ruiz, Rosa María
  • Carreón Freyre, Dora
  • Lambert, John
  • Teatini, Pietro
  • Cabral Cano, E.
  • Erkens, Gilles
  • Galloway, Devin
  • Hung, Wei-Chia
  • Kakar, Najeebullah
  • Sneed, Michelle
  • Tosi, Luigi
  • Wang, Hanmei
  • Ye, Shujun
Funding for this study was provided partly by the Spanish Research Agency (AQUARISK, PRX19/00065, TEC2017-85244-C2-1-P projects) and PRIMA RESERVOIR project, and by all the institutions represented in the Land Subsidence International Initiative from UNESCO., Peer reviewed