Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combining SfM Photogrammetry and Terrestrial Laser Scanning to Assess Event-Scale Sediment Budgets along a Gravel-Bed Ephemeral Stream

  • Conesa-García, Carmelo
  • Puig-Mengual, Carlos
  • Riquelme, Adrián
  • Tomás, Roberto
  • García-Lorenzo, Rafael
  • Pastor, José L.
  • Pérez-Cutillas, Pedro
  • Cano Gonzalez, Miguel
  • Martinez-Capel, Francisco|||0000-0003-4991-0251
[EN] Stream power represents the rate of energy expenditure along a stream reach and can be calculated using topographic data acquired via structure-from-motion (SfM) photogrammetry and terrestrial laser scanning (TLS). This study sought to quantitatively relate morphological adjustments in the Azohia Rambla, a gravel-bed ephemeral stream in southeastern Spain, to stream power (omega), critical power (omega(c)), and energy gradients ( partial differential omega/ partial differential s), along different reference channel reaches of 200 to 300 m in length. High-resolution digital terrain models (HRDTMs), combined with ortophotographs and point clouds from 2018, 2019, and 2020, and ground-based surveys, were used to estimate the spatial variability of morphological sediment budgets and to assess channel bed mobility during the study period at different spatial scales: reference channel reaches (RCRs), pilot bed survey areas (PBSAs), and representative geomorphic units (RGUs). The optimized complementary role of the SfM technique and terrestrial laser scanning allowed the generation of accurate and reliable HRDTMs, upon which a 1-D hydrodynamic model was calibrated and sediment budgets calculated. The resulting high-resolution maps allowed a spatially explicit analysis of stream power and transport efficiency in relation to volumes of erosion and deposition in the RCR and PBSA. In addition, net incision or downcutting and vertical sedimentary accretion were monitored for each flood event in relation to bedforms and hydraulic variables. Sediment sources and sinks and bed armoring processes showed different trends according to the critical energy and stream power gradient, which were verified from field observations. During flows exceeding bankfull discharges (between 18 and 24 m(3) s(-1) according to channel reach), significant variations in partial differential omega/ partial differential s values and omega/omega(c) ratios (e.g., -15 < partial differential omega/ partial differential s < 15 Wm(-3); omega/omega(c) > 2 for a peak discharge of 31 m(3) s(-1)) were associated with a large amount of bedload mobilized upstream and vertical accretion along the middle reach (average rise height of 0.20 to 0.35 m for the same event). By contrast, more moderate peak flows (<= 10 m(3) s(-1)) only produced minor changes resulting in surface washing, selective transport, and local bed scouring., This research was funded by ERDF/Spanish Ministry of Science, Innovation and Universities-State Research Agency/Project CGL2017-84625-C2-1-R (CCAMICEM); State Program for Research, Development and Innovation Focused on the Challenges of Society, the Spanish Ministry of Economy and Competitiveness (MINECO) and EU FEDER under Project TEC2017-85244-C2-1-P and by the University of Alicante (vigrob-157 and GRE18-05).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluación de la estabilidad de taludes rocosos a partir de nubes de puntos 3D obtenidas con un vehículo aéreo no tripulado, Evaluation of the stability of rocky slopes using 3D point clouds obtained from an unmanned aerial vehicle

  • Tomás, R.
  • Riquelme, A.
  • Cano, M.
  • Pastor, J. L.
  • Pagán, J. I.
  • Asensio, J. L.
  • Ruffo, M.
[ES] En este trabajo se describe una metodología propuesta para la identificación semiautomática de discontinuidades y el posterior análisis cinemático y de estabilidad a través de su aplicación a una trinchera excavada en roca de una línea de ferrocarril. La adquisición de imágenes se ha llevado a cabo mediante un vehículo aéreo no tripulado de seis rotores para su posterior restitución fotogramétrica a través de la técnica digital Structure from Motion (SfM) mediante el programa Agisoft Metashape que proporciona una nube de puntos 3D. A partir de esta nube de puntos, se han identificado cuatro familias de discontinuidades (J1, J2, J3 y J4) que afectan al talud haciendo uso del programa de código abierto Discontinuity Set Extractor (DSE). Finalmente, se han llevado a cabo análisis cinemáticos y de estabilidad de las posibles roturas de bloques a favor de las discontinuidades identificadas en el talud. Los resultados muestran tres potenciales roturas por cuña y una plana que han sido validadas cualitativamente mediante el análisis de la geometría de las nubes de puntos., [EN] In this work, a methodology proposed for the semiautomatic identification of discontinuities and the later kinematic and stability analyses is described through its application to a rocky railway line cutting. Image acquisition has been performed using a six-rotors unmanned aerial vehicle for their subsequent photogrammetric restitution by means of the digital technique Structure from Motion (SfM) by means of the software Agisoft Metashape that provides a 3D point cloud. From this 3D point cloud, four discontinuity sets (J1, J2, J3 and J4) affecting the cutting have been identified using the open source software Discontinuity Set Extractor (DSE). Finally, kinematic and stability analyses of the potential block failures controlled by the discontinuities identified in the cutting. The results show three potential wedge and planar failures that have been qualitatively validated trough the geometric analysis of the 3D point cloud., Este trabajo se ha realizado en el marco del proyecto MOMIT, recibiendo financiación de Shift2Rail Joint Undertaking perteneciente al programa de investigación e innovación H2020 de la Unión Europea a través de la subvención No 777630, del proyecto de la Universidad de Alicante GRE18-05 y del proyecto TEC2017-85244-C2-1-P del Ministerio de Economía y Competitividad (MINECO) y EU FEDER. Los autores quieren dar las gracias a José Miguel García Torres (Geotor S.L.) por la fotografía del UAV incluida en la Figura 1.