Pasar al contenido principal

SENSORES PARA APLICACIONES MULTI-ESCALA EN TELEDETECCION

TEC2017-85244-C2-2-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling the two- and three-dimensional displacement field in Lorca, Spain, subsidence and the global implications

  • Fernández Torres, José
  • Prieto, Juan Francisco
  • Escayo, Joaquin
  • Camacho, Antonio G.
  • Luzón, Francisco
  • Tiampo, Kristy F.
  • Palano, Mimmo
  • Abajo, Tamara
  • Pérez, Enrique
  • Velasco, Jesus
  • Herrero, Tomas
  • Bru, Guadalupe
  • Molina, Iñigo
  • López, Juan
  • Rodríguez Velasco, Gema
  • Gómez, Israel
  • Mallorquí Franquet, Jordi Joan
Land subsidence associated with overexploitation of aquifers is a hazard that commonly affects large areas worldwide. The Lorca area, located in southeast Spain, has undergone one of the highest subsidence rates in Europe as a direct consequence of long-term aquifer exploitation. Previous studies carried out on the region assumed that the ground deformation retrieved from satellite radar interferometry corresponds only to vertical displacement. Here we report, for the first time, the two- and three-dimensional displacement field over the study area using synthetic aperture radar (SAR) data from Sentinel-1A images and Global Navigation Satellite System (GNSS) observations. By modeling this displacement, we provide new insights on the spatial and temporal evolution of the subsidence processes and on the main governing mechanisms. Additionally, we also demonstrate the importance of knowing both the vertical and horizontal components of the displacement to properly characterize similar hazards. Based on these results, we propose some general guidelines for the sustainable management and monitoring of land subsidence related to anthropogenic activities. Introduction, The research has been supported by the Spanish Ministry of Economy and Competitiveness research projects ESP2013-47780-557 C2-1-R and TEC2017-85244-C2-2-P. It is a contribution to the Moncloa Campus of International Excellence., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sentinel-1 InSAR coherence for land cover mapping: a comparison of multiple feature-based classifiers

  • Jacob, Alex
  • Vicente-Guijalba, Fernando
  • López Martínez, Carlos|||0000-0002-1366-9446
  • López Sánchez, Juan Manuel
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
This article investigates and demonstrates the suitability of the Sentinel-1 interferometric coherence for land cover and vegetation mapping. In addition, this study analyzes the performance of this feature along with polarization and intensity products according to different classification strategies and algorithms. Seven different classification workflows were evaluated, covering pixel- and object-based analyses, unsupervised and supervised classification, different machine-learning classifiers, and the various effects of distinct input features in the SAR domain—interferometric coherence, backscattered intensities, and polarization. All classifications followed the Corine land cover nomenclature. Three different study areas in Europe were selected during 2015 and 2016 campaigns to maximize diversity of land cover. Overall accuracies (OA), ranging from 70% to 90%, were achieved depending on the study area and methodology, considering between 9 and 15 classes. The best results were achieved in the rather flat area of Doñana wetlands National Park in Spain (OA 90%), but even the challenging alpine terrain around the city of Merano in northern Italy (OA 77%) obtained promising results. The overall potential of Sentinel-1 interferometric coherence for land cover mapping was evaluated as very good. In all cases, coherence-based results provided higher accuracies than intensity-based strategies, considering 12 days of temporal sampling of the Sentinel-1 A stack. Both coherence and intensity prove to be complementary observables, increasing the overall accuracies in a combined strategy. The accuracy is expected to increase when Sentinel-1 A/B stacks, i.e., six-day sampling, are considered., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impact of wind-induced scatterers motion on GB-SAR imaging

  • Lort Cuenca, Marc
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • López Martínez, Carlos|||0000-0002-1366-9446
  • Fabregas Canovas, Francisco Javier|||0000-0002-7654-9695
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Ground-based synthetic aperture radar (GB-SAR) sensors represent a cost-effective solution for change detection and ground displacement assessment of small-scale areas in real-time early warning applications. GB-SAR systems based on stepped linear frequency modulated continuous wave signals have led to several improvements such as a significant reduction of the acquisition time. Nevertheless, the acquisition time is still long enough to force a degradation of the quality of the reconstructed images because of possible short-term variable reflectivity of the scenario. This reduction of the quality may degrade the differential interferometric detection process. In scenarios where interesting targets are surrounded by vegetation, this is normally related to atmospheric conditions, in particular, the wind. The present paper characterizes the effect of the short-term variable reflectivity in the GB-SAR image reconstruction and evaluates its equivalent blurring effect, the decorrelation introduced in the SAR images, and the degradation of the extracted parameters. In order to validate the results, the study assesses different GB-SAR images obtained with the RISKSAR-X sensor, which has been developed by the Universitat Politècnica de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An accurate method to correct atmospheric phase delay for InSAR with the ERA5 global atmospheric model

  • Hu, Zhongbo
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
Differential SAR Interferometry (DInSAR) has proven its unprecedented ability and merits of monitoring ground deformation on a large scale with centimeter to millimeter accuracy. However, atmospheric artifacts due to spatial and temporal variations of the atmospheric state often affect the reliability and accuracy of its results. The commonly-known Atmospheric Phase Screen (APS) appears in the interferograms as ghost fringes not related to either topography or deformation. Atmospheric artifact mitigation remains one of the biggest challenges to be addressed within the DInSAR community. State-of-the-art research works have revealed that atmospheric artifacts can be partially compensated with empirical models, point-wise GPS zenith path delay, and numerical weather prediction models. In this study, we implement an accurate and realistic computing strategy using atmospheric reanalysis ERA5 data to estimate atmospheric artifacts. With this approach, the Line-of-Sight (LOS) path along the satellite trajectory and the monitored points is considered, rather than estimating it from the zenith path delay. Compared with the zenith delay-based method, the key advantage is that it can avoid errors caused by any anisotropic atmospheric phenomena. The accurate method is validated with Sentinel-1 data in three different test sites: Tenerife island (Spain), Almería (Spain), and Crete island (Greece). The effectiveness and performance of the method to remove APS from interferograms is evaluated in the three test sites showing a great improvement with respect to the zenith-based approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Spatial analysis of land subsidence in the San Luis Potosi Valley induced by aquifer overexploitation using the coherent pixels technique (CPT) and Sentinel-1 InSAR observation

  • Navarro Hernández, María Inés
  • Tomás Jover, Roberto
  • López Sánchez, Juan Manuel
  • Cárdenas Tristán, Abraham
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
The San Luis Potosi metropolitan area has suffered considerable damage from land subsidence over the past decades, which has become visible since 1990. This paper seeks to evaluate the effects of groundwater withdrawal on land subsidence in the San Luis Potosi Valley and the development of surface faults due to the differential compaction of sediments. For this purpose, we applied the Coherent Pixels Technique (CPT), a Persistent Scatterer Interferometry (PSI) technique, using 112 Sentinel-1 acquisitions from October 2014 to November 2019 to estimate the deformation rate. The results revealed that the deformation areas in the municipality of Soledad de Graciano Sánchez mostly exhibit subsidence values between -1.5 and -3.5 cm/year; whereas in San Luis Potosi these values are between -1.8 and -4.2 cm/year. The PSI results were validated by five Global Navigation Satellite System (GNSS) benchmarks available, providing a data correlation between the results obtained with both techniques of 0.986. This validation suggests that interferometric derived deformations agree well with results obtained from GNSS data. The strong relationship between trace fault, land subsidence,e and groundwater extraction suggests that groundwater withdrawal is resulting in subsidence induced faulting, which follows the pattern of structural faults buried by sediments., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), the State Agency of Research (AEI) and European Funds for Regional Development (FEDER) under project TEMUSA (TEC2017-85244-C2-1-P and TEC2017-85244-C2-2-P) and by Mexican Council of Science and technology (CONACYT). This paper is also funded by the PRIMA programme supported by the European Union under grant agreement No 1924, project RESERVOIR. It also has been supported by the CommSensLab, which is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigacion, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Improving PSI processing of mining induced large deformations with external models

  • Du, Sen
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Fan, Hongdong
  • Zheng, Meinan
Ground subsidences, either caused by natural phenomena or human activities, can threaten the safety of nearby infrastructures and residents. Among the different causes, mining operations can trigger strong subsidence phenomena with a fast nonlinear temporal behaviour. Therefore, a reliable and precise deformation monitoring is of great significance for safe mining and protection of facilities located above or near the mined-out area. Persistent Scatterer Interferometry (PSI) is a technique that uses stacks Synthetic Aperture Radar (SAR) images to remotely monitor the ground deformation of large areas with a high degree of precision at a reasonable cost. Unfortunately, PSI presents limitations when monitoring large gradient deformations when there is phase ambiguity among adjacent Persistent Scatterer (PS) points. In this paper, an improvement of PSI processing, named as External Model-based Deformation Decomposition PSI (EMDD-PSI), is proposed to address this limitation by taking advantage of an external model. The proposed method first uses interferograms generated from SAR Single Look Complex (SLC) images to optimize the parameter adjustments of the external model. Then, the modelled spatial distribution of subsidence is utilized to reduce the fringes of the interferograms generated from the SAR images and to ease the PSI processing. Finally, the ground deformation is retrieved by jointly adding the external model and PSI results. In this paper, fourteen Radarsat-2 SAR images over Fengfeng mining area (China) are used to demonstrate the capabilities of the proposed method. The results are evaluated by comparing them with leveling data of the area covering the same temporal period. Results have shown that, after the optimization, the model is able to mimic the real deformation and the fringes of the interferograms can be effectively reduced. As a consequence, the large gradient deformation then can be better retrieved with the preservation of the nonlinear subsidence term. The ground truth shows that, comparing with the classical PSI and PSI with unadjusted parameters, the proposed scheme reduces the error by 35.2% and 20.4%, respectively., This research was funded by China Scholarship Council (grant No.201806420035); by the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO); by the State Research Agency (AEI); by the European Funds for Regional Development (EFRD) under project TEC2017-85244-C2-2-P; and by the CommSensLab. CommSensLab is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Atmospheric artifacts correction with a covariance-weighted linear model over mountainous regions

  • Hu, Zhongbo
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • Fan, Hongdong
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Mitigating the atmospheric phase delay is one of the largest challenges faced by the differential synthetic aperture radar (SAR) interferometry community. Recently, many publications have studied correcting the stratified tropospheric phase delay by assuming a linear model between them and the topography. However, most of these studies have not considered the effect of turbulent atmospheric artifacts when adjusting the linear model to data. In this paper, we present an improved technique that minimizes the influence of the turbulent atmosphere in the model adjustment. In the proposed algorithm, the model is adjusted to the phase differences of pixels instead of using the unwrapped phase of each pixel. In addition, the different phase differences are weighted as a function of its atmospheric phase screen covariance estimated from an empirical variogram to reduce, in the model adjustment, the impact of pixel pairs with a significant turbulent atmosphere. The good performance of the proposed method has been validated with both the simulated and real Sentinel-1A SAR data in the mountainous area of Tenerife island, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessment of 3-D printing technologies for millimeter-wave reflectors

  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Blanch Boris, Sebastián|||0000-0002-8757-583X
  • Vidal, Neus
  • Lopez-Villegas, Jose Maria
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Three different 3D printing technologies: Stereolithography (SLA), Fused Deposition Modeling (FDM) and HP Multi Jet Fusion Technology (MJF) are compared to build a parabolic reflector operating at 100 GHz. Fabrication tolerance and surface roughness before and after metallization are accurately measured. The performance of the reflectors is measured in the near field and its performance is compared against an optical grade reflector. In this way the performance of the final product is thoroughly assessed, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Collimated beam FMCW radar for vital sign patient monitoring

  • Prat, Arnau
  • Blanch Boris, Sebastián|||0000-0002-8757-583X
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Patient monitoring of vital signals such as breathing rhythm and heart beat rate can be done remotely by the use of a radar system. This approach is advantageous since it does not require any contact with the patient. Obviously contactless monitoring results in a more comfortable situation for the patient, and in occasions it is almost mandatory as in the case of heavy burnt or newborn patients. Moreover, additional information such movement patterns are also available. A 120 GHz FMCW radar is described with special focus on the design, construction and testing of a specific reflector antenna for the system. The system is based on a commercial radar chipset that includes its own antennas. The challenge has been to design the optimum reflector and to build it and test it in a cost effective way. The reflector has been 3D printed and a near-field testing technique has been implemented to assess its performance. The results show that the system is able to measure the vital signs at distances beyond one meter.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Bistatic SAR imaging and precise orbit determination using geostationary telecommunication satellites

  • Carreño Megias, Xavier
  • Nicolás Álvarez, Jorge|||0000-0001-6143-1515
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., SAR Satellite missions from Geostationary orbits (GEOSAR) would offer the short revisit times required in the observation of fast phenomena. Multiple baseline inteferometry based on receiving ground stations is a technique under study for precise orbit determination of GEO satellites, a requirement for SAR processing echo data in GEOSAR missions. This interferometric technique can be complementary to GNSS based orbit determination which is degraded for high altitude missions above the MEO GNSS constellations. A multichannel coherent receiver is presented with two complementary functions: interferometric orbit determination and bistatic SAR imaging using present GEO telecommunication satellites transmissions. To improve orbit determination large baselines are formed based on urban reflectors of opportunity. The obtained orbits are the basis for Synthetic Aperture focusing of received echo data allowing to form images from the urban and natural areas surrounding the inteferometer site. In return the images allow to select new reflectors of opportunity that can be used to increase the number of baselines and further improve the orbits. The paper describes the developed system, the synergies between both orbit and imaging functions and preliminary experimental results with interferometric and polarimetric applications., This work has been supported by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu MDM-2016-0600 and under projects TEC2017-85244-C2-2-P and PID2020-117303GB-C21/AEI/10.13039/501100011033, and by the Spanish Ministry of Science and Innovation under grant PRE2018-086003, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A temporal phase coherence estimation algorithm and its application on DInSAR pixel selection

  • Zhao, Feng
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Pixel selection is a crucial step of all advanced Differential Interferometric Synthetic Aperture Radar (DInSAR) techniques that have a direct impact on the quality of the final DInSAR products. In this paper, a full-resolution phase quality estimator, i.e., the temporal phase coherence (TPC), is proposed for DInSAR pixel selection. The method is able to work with both distributed scatterers (DSs) and permanent scatterers (PSs). The influence of different neighboring window sizes and types of interferograms combinations [both the single-master (SM) and the multi-master (MM)] on TPC has been studied. The relationship between TPC and phase standard deviation (STD) of the selected pixels has also been derived. Together with the classical coherence and amplitude dispersion methods, the TPC pixel selection algorithm has been tested on 37 VV polarization Radarsat-2 images of Barcelona Airport. Results show the feasibility and effectiveness of TPC pixel selection algorithm. Besides obvious improvements in the number of selected pixels, the new method shows some other advantages comparing with the other classical two. The proposed pixel selection algorithm, which presents an affordable computational cost, is easy to be implemented and incorporated into any advanced DInSAR processing chain for high-quality pixels' identification., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modeling the two- and three-dimensional displacement field in Lorca, Spain, subsidence and the global implications

  • Fernández Torres, José
  • Prieto Morin, Juan Francisco
  • Escayo Menéndez, Joaquín
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
Land subsidence associated with overexploitation of aquifers is a hazard that commonly affects large areas worldwide. The Lorca area, located in southeast Spain, has undergone one of the highest subsidence rates in Europe as a direct consequence of long-term aquifer exploitation. Previous studies carried out on the region assumed that the ground deformation retrieved from satellite radar interferometry corresponds only to vertical displacement. Here we report, for the first time, the two- and three-dimensional displacement field over the study area using synthetic aperture radar (SAR) data from Sentinel-1A images and Global Navigation Satellite System (GNSS) observations. By modeling this displacement, we provide new insights on the spatial and temporal evolution of the subsidence processes and on the main governing mechanisms. Additionally, we also demonstrate the importance of knowing both the vertical and horizontal components of the displacement to properly characterize similar hazards. Based on these results, we propose some general guidelines for the sustainable management and monitoring of land subsidence related to anthropogenic activities., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

SMF-POLOPT: an adaptive multitemporal pol(DIn)SAR filtering and phase optimization algorithm for PSI applications

  • Zhao, Feng
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Speckle noise and decorrelation can hamper the application and interpretation of PolSAR images. In this paper, a new adaptive multitemporal Pol(DIn)SAR filtering and phase optimization algorithm is proposed to address these limitations. This algorithm first categorizes and adaptively filters permanent scatterer (PS) and distributed scatterer (DS) pixels according to their polarimetric scattering mechanisms [i.e., the scattering-mechanism-based filtering (SMF)]. Then, two different polarimetric DInSAR (POLDInSAR) phase OPTimization methods are applied separately on the filtered PS and DS pixels (i.e., POLOPT). Finally, an inclusive pixel selection approach is used to identify high-quality pixels for ground deformation estimation. Thirty-one full-polarization Radarsat-2 SAR images over Barcelona (Spain) and 31 dual-polarization TerraSAR-X images over Murcia (Spain) have been used to evaluate the performance of the proposed algorithm. The PolSAR filtering results show that the speckle of PolSAR images has been well reduced with the preservation of details by the proposed SMF. The obtained ground deformation monitoring results have shown significant improvements, about ×7.2 (the full-polarization case) and ×3.8 (the dual-polarization case) with respect to the classical full-resolution single-pol amplitude dispersion method, on the valid pixels' densities. The excellent PolSAR filtering and ground deformation monitoring results achieved by the adaptive Pol(DIn)SAR filtering and phase optimization algorithm (i.e., the SMF-POLOPT) have validated the effectiveness of this proposed scheme., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Interferometric orbit determination system for geosynchronous SAR missions: experimental proof of concept

  • Nicolás Álvarez, Jorge|||0000-0001-6143-1515
  • Carreño Megias, Xavier
  • Ferrer Torres, Estel
  • Albert Galí, Miquel
  • Rodriguez Tersa, Judith
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
Future Geosynchronous Synthetic Aperture Radar (GEOSAR) missions will provide permanent monitoring of continental areas of the planet with revisit times of less than 24 h. Several GEOSAR missions have been studied in the USA, Europe, and China with different applications, including water cycle monitoring and early warning of disasters. GEOSAR missions require unprecedented orbit determination precision in order to form focused Synthetic Aperture Radar (SAR) images from Geosynchronous Orbit (GEO). A precise orbit determination technique based on interferometry is proposed, including a proof of concept based on an experimental interferometer using three antennas separated 10–15 m. They provide continuous orbit observations of present communication satellites operating at GEO as illuminators of opportunity. The relative phases measured between the receivers are used to estimate the satellite position. The experimental results prove the interferometer is able to track GEOSAR satellites based on the transmitted signals. This communication demonstrates the consistency and feasibility of the technique in order to foster further research with longer interferometric baselines that provide observables delivering higher orbital precision., This work has been supported by the Spanish Science, Research and Innovation Plan (MICINN) with Project Codes TEC2017-85244-C2-2-P and PID2020-117303GB-C21 and by Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impact of SAR image resolution on polarimetric persistent scatterer interferometry with amplitude dispersion optimization

  • Zhao, Feng
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
  • López Sánchez, Juan Manuel
Polarimetric persistent scatterer interferometry (PolPSI) takes advantage of polarimetric optimization algorithms that enhance interferograms’ phase quality by adequately combining the available polarization channels (e.g., HH, VV, HV, and VH) into an improved one. Amplitude dispersion ( DA ) is one of the commonly used phase quality metrics for this optimization. The resolution of the images is supposed to have an impact on the performance of DA -based PolPSI in terms of both pixel density and quality. In this research, this impact is investigated. Specifically, 30 quad-pol RADARSAT-2 images over Barcelona with a resolution around 5 m in both range and azimuth are employed to generate additional data sets with degraded resolutions, ranging from 7.5 to 20 m. The results confirm that, in all cases, the ability of DA to select high-quality pixels, i.e., persistent scatterers, decreases when the spatial resolution worsens because the loss of resolution increases the number of scatterers present in a resolution cell. In addition, it would be expected that the performance of the polarimetric optimization of DA would tend to decrease when the spatial resolution worsens. However, for all employed resolutions, the polarimetric optimization improves the density and quality of PSs with respect to that of any single polarimetric channel. Moreover, this improvement is more noticeable, in relative terms, as the image resolution degrades., This work was supported in part by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), the State Research Agency (AEI) and the European Funds for Regional Development (EFRD) under Project TEC2017-85244-C2-1-P and Project TEC2017-85244-C2-2-P, in part by the National Natural Science Foundation of China under Grant 42004011 and Grant 41874044, in part by the China Postdoctoral Science Foundation under Grant 2020M671646, in part by the Priority Academic Program Development (PAPD) of Jiangsu Higher Education Institutions (Science and Technology of Surveying and Mapping), and in part by the CommSensLab, which is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the AEI, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Coherency Matrix Decomposition-Based Polarimetric Persistent Scatterer Interferometry

  • Zhao, Feng
  • Mallorquí Franquet, Jordi Joan|||0000-0002-9424-1889
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The rationale of polarimetric optimization techniques is to enhance the phase quality of the interferograms by combining adequately the different polarization channels available to produce an improved one. Different approaches have been proposed for polarimetric persistent scatterer interferometry (PolPSI). They range from the simple and computationally efficient BEST, where, for each pixel, the polarimetric channel with the best response in terms of phase quality is selected, to those with high-computational burden like the equal scattering mechanism (ESM) and the suboptimum scattering mechanism (SOM). BEST is fast and simple, but it does not fully exploit the potentials of polarimetry. On the other side, ESM explores all the space of solutions and finds the optimal one but with a very high-computational burden. A new PolPSI algorithm, named coherency matrix decomposition-based PolPSI (CMD-PolPSI), is proposed to achieve a compromise between phase optimization and computational cost. Its core idea is utilizing the polarimetric synthetic aperture radar (PolSAR) coherency matrix decomposition to determine the optimal polarization channel for each pixel. Three different PolSAR image sets of both full- (Barcelona) and dual-polarization (Murcia and Mexico City) are used to evaluate the performance of CMD-PolPSI. The results show that CMD-PolPSI presents better optimization results than the BEST method by using either $D_{\mathrm{ A}}$ or temporal mean coherence as phase quality metrics. Compared with the ESM algorithm, CMD-PolPSI is 255 times faster but its performance is not optimal. The influence of the number of available polarization channels and pixel's resolutions on the CMD-PolPSI performance is also discussed., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Atmospheric artifacts correction with a covariance-weighted linear model over mountainous regions

  • Hu, Zhongbo
  • Mallorquí Franquet, Jordi Joan
  • Fan, Hongdong
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Mitigating the atmospheric phase delay is one of the largest challenges faced by the differential synthetic aperture radar (SAR) interferometry community. Recently, many publications have studied correcting the stratified tropospheric phase delay by assuming a linear model between them and the topography. However, most of these studies have not considered the effect of turbulent atmospheric artifacts when adjusting the linear model to data. In this paper, we present an improved technique that minimizes the influence of the turbulent atmosphere in the model adjustment. In the proposed algorithm, the model is adjusted to the phase differences of pixels instead of using the unwrapped phase of each pixel. In addition, the different phase differences are weighted as a function of its atmospheric phase screen covariance estimated from an empirical variogram to reduce, in the model adjustment, the impact of pixel pairs with a significant turbulent atmosphere. The good performance of the proposed method has been validated with both the simulated and real Sentinel-1A SAR data in the mountainous area of Tenerife island, Spain., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A temporal phase coherence estimation algorithm and its application on DInSAR pixel selection

  • Zhao, Feng
  • Mallorquí Franquet, Jordi Joan
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Pixel selection is a crucial step of all advanced Differential Interferometric Synthetic Aperture Radar (DInSAR) techniques that have a direct impact on the quality of the final DInSAR products. In this paper, a full-resolution phase quality estimator, i.e., the temporal phase coherence (TPC), is proposed for DInSAR pixel selection. The method is able to work with both distributed scatterers (DSs) and permanent scatterers (PSs). The influence of different neighboring window sizes and types of interferograms combinations [both the single-master (SM) and the multi-master (MM)] on TPC has been studied. The relationship between TPC and phase standard deviation (STD) of the selected pixels has also been derived. Together with the classical coherence and amplitude dispersion methods, the TPC pixel selection algorithm has been tested on 37 VV polarization Radarsat-2 images of Barcelona Airport. Results show the feasibility and effectiveness of TPC pixel selection algorithm. Besides obvious improvements in the number of selected pixels, the new method shows some other advantages comparing with the other classical two. The proposed pixel selection algorithm, which presents an affordable computational cost, is easy to be implemented and incorporated into any advanced DInSAR processing chain for high-quality pixels' identification., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An accurate method to correct atmospheric phase delay for InSAR with the ERA5 global atmospheric model

  • Hu, Zhongbo
  • Mallorquí Franquet, Jordi Joan
Differential SAR Interferometry (DInSAR) has proven its unprecedented ability and merits of monitoring ground deformation on a large scale with centimeter to millimeter accuracy. However, atmospheric artifacts due to spatial and temporal variations of the atmospheric state often affect the reliability and accuracy of its results. The commonly-known Atmospheric Phase Screen (APS) appears in the interferograms as ghost fringes not related to either topography or deformation. Atmospheric artifact mitigation remains one of the biggest challenges to be addressed within the DInSAR community. State-of-the-art research works have revealed that atmospheric artifacts can be partially compensated with empirical models, point-wise GPS zenith path delay, and numerical weather prediction models. In this study, we implement an accurate and realistic computing strategy using atmospheric reanalysis ERA5 data to estimate atmospheric artifacts. With this approach, the Line-of-Sight (LOS) path along the satellite trajectory and the monitored points is considered, rather than estimating it from the zenith path delay. Compared with the zenith delay-based method, the key advantage is that it can avoid errors caused by any anisotropic atmospheric phenomena. The accurate method is validated with Sentinel-1 data in three different test sites: Tenerife island (Spain), Almería (Spain), and Crete island (Greece). The effectiveness and performance of the method to remove APS from interferograms is evaluated in the three test sites showing a great improvement with respect to the zenith-based approach., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sentinel-1 InSAR coherence for land cover mapping: a comparison of multiple feature-based classifiers

  • Jacob, Alex
  • Vicente-Guijalba, Fernando
  • López Martínez, Carlos
  • López Sánchez, Juan Manuel
  • Mallorquí Franquet, Jordi Joan
This article investigates and demonstrates the suitability of the Sentinel-1 interferometric coherence for land cover and vegetation mapping. In addition, this study analyzes the performance of this feature along with polarization and intensity products according to different classification strategies and algorithms. Seven different classification workflows were evaluated, covering pixel- and object-based analyses, unsupervised and supervised classification, different machine-learning classifiers, and the various effects of distinct input features in the SAR domain—interferometric coherence, backscattered intensities, and polarization. All classifications followed the Corine land cover nomenclature. Three different study areas in Europe were selected during 2015 and 2016 campaigns to maximize diversity of land cover. Overall accuracies (OA), ranging from 70% to 90%, were achieved depending on the study area and methodology, considering between 9 and 15 classes. The best results were achieved in the rather flat area of Doñana wetlands National Park in Spain (OA 90%), but even the challenging alpine terrain around the city of Merano in northern Italy (OA 77%) obtained promising results. The overall potential of Sentinel-1 interferometric coherence for land cover mapping was evaluated as very good. In all cases, coherence-based results provided higher accuracies than intensity-based strategies, considering 12 days of temporal sampling of the Sentinel-1 A stack. Both coherence and intensity prove to be complementary observables, increasing the overall accuracies in a combined strategy. The accuracy is expected to increase when Sentinel-1 A/B stacks, i.e., six-day sampling, are considered., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bistatic SAR imaging and precise orbit determination using geostationary telecommunication satellites

  • Carreño Megias, Xavier
  • Nicolás Álvarez, Jorge
  • Broquetas Ibars, Antoni
  • Aguasca Solé, Alberto
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., SAR Satellite missions from Geostationary orbits (GEOSAR) would offer the short revisit times required in the observation of fast phenomena. Multiple baseline inteferometry based on receiving ground stations is a technique under study for precise orbit determination of GEO satellites, a requirement for SAR processing echo data in GEOSAR missions. This interferometric technique can be complementary to GNSS based orbit determination which is degraded for high altitude missions above the MEO GNSS constellations. A multichannel coherent receiver is presented with two complementary functions: interferometric orbit determination and bistatic SAR imaging using present GEO telecommunication satellites transmissions. To improve orbit determination large baselines are formed based on urban reflectors of opportunity. The obtained orbits are the basis for Synthetic Aperture focusing of received echo data allowing to form images from the urban and natural areas surrounding the inteferometer site. In return the images allow to select new reflectors of opportunity that can be used to increase the number of baselines and further improve the orbits. The paper describes the developed system, the synergies between both orbit and imaging functions and preliminary experimental results with interferometric and polarimetric applications., This work has been supported by the Spanish MCINN funds Unidad de Excelencia Maria de Maeztu MDM-2016-0600 and under projects TEC2017-85244-C2-2-P and PID2020-117303GB-C21/AEI/10.13039/501100011033, and by the Spanish Ministry of Science and Innovation under grant PRE2018-086003, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Spatial analysis of land subsidence in the San Luis Potosi Valley induced by aquifer overexploitation using the coherent pixels technique (CPT) and Sentinel-1 InSAR observation

  • Navarro Hernández, María Inés
  • Tomás Jover, Roberto
  • López Sánchez, Juan Manuel
  • Cárdenas Tristán, Abraham
  • Mallorquí Franquet, Jordi Joan
The San Luis Potosi metropolitan area has suffered considerable damage from land subsidence over the past decades, which has become visible since 1990. This paper seeks to evaluate the effects of groundwater withdrawal on land subsidence in the San Luis Potosi Valley and the development of surface faults due to the differential compaction of sediments. For this purpose, we applied the Coherent Pixels Technique (CPT), a Persistent Scatterer Interferometry (PSI) technique, using 112 Sentinel-1 acquisitions from October 2014 to November 2019 to estimate the deformation rate. The results revealed that the deformation areas in the municipality of Soledad de Graciano Sánchez mostly exhibit subsidence values between -1.5 and -3.5 cm/year; whereas in San Luis Potosi these values are between -1.8 and -4.2 cm/year. The PSI results were validated by five Global Navigation Satellite System (GNSS) benchmarks available, providing a data correlation between the results obtained with both techniques of 0.986. This validation suggests that interferometric derived deformations agree well with results obtained from GNSS data. The strong relationship between trace fault, land subsidence,e and groundwater extraction suggests that groundwater withdrawal is resulting in subsidence induced faulting, which follows the pattern of structural faults buried by sediments., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), the State Agency of Research (AEI) and European Funds for Regional Development (FEDER) under project TEMUSA (TEC2017-85244-C2-1-P and TEC2017-85244-C2-2-P) and by Mexican Council of Science and technology (CONACYT). This paper is also funded by the PRIMA programme supported by the European Union under grant agreement No 1924, project RESERVOIR. It also has been supported by the CommSensLab, which is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigacion, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of wind-induced scatterers motion on GB-SAR imaging

  • Lort Cuenca, Marc
  • Aguasca Solé, Alberto
  • López Martínez, Carlos
  • Fabregas Canovas, Francisco Javier
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Ground-based synthetic aperture radar (GB-SAR) sensors represent a cost-effective solution for change detection and ground displacement assessment of small-scale areas in real-time early warning applications. GB-SAR systems based on stepped linear frequency modulated continuous wave signals have led to several improvements such as a significant reduction of the acquisition time. Nevertheless, the acquisition time is still long enough to force a degradation of the quality of the reconstructed images because of possible short-term variable reflectivity of the scenario. This reduction of the quality may degrade the differential interferometric detection process. In scenarios where interesting targets are surrounded by vegetation, this is normally related to atmospheric conditions, in particular, the wind. The present paper characterizes the effect of the short-term variable reflectivity in the GB-SAR image reconstruction and evaluates its equivalent blurring effect, the decorrelation introduced in the SAR images, and the degradation of the extracted parameters. In order to validate the results, the study assesses different GB-SAR images obtained with the RISKSAR-X sensor, which has been developed by the Universitat Politècnica de Catalunya., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of SAR image resolution on polarimetric persistent scatterer interferometry with amplitude dispersion optimization

  • Zhao, Feng
  • Mallorquí Franquet, Jordi Joan
  • López Sánchez, Juan Manuel
Polarimetric persistent scatterer interferometry (PolPSI) takes advantage of polarimetric optimization algorithms that enhance interferograms’ phase quality by adequately combining the available polarization channels (e.g., HH, VV, HV, and VH) into an improved one. Amplitude dispersion ( DA ) is one of the commonly used phase quality metrics for this optimization. The resolution of the images is supposed to have an impact on the performance of DA -based PolPSI in terms of both pixel density and quality. In this research, this impact is investigated. Specifically, 30 quad-pol RADARSAT-2 images over Barcelona with a resolution around 5 m in both range and azimuth are employed to generate additional data sets with degraded resolutions, ranging from 7.5 to 20 m. The results confirm that, in all cases, the ability of DA to select high-quality pixels, i.e., persistent scatterers, decreases when the spatial resolution worsens because the loss of resolution increases the number of scatterers present in a resolution cell. In addition, it would be expected that the performance of the polarimetric optimization of DA would tend to decrease when the spatial resolution worsens. However, for all employed resolutions, the polarimetric optimization improves the density and quality of PSs with respect to that of any single polarimetric channel. Moreover, this improvement is more noticeable, in relative terms, as the image resolution degrades., This work was supported in part by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), the State Research Agency (AEI) and the European Funds for Regional Development (EFRD) under Project TEC2017-85244-C2-1-P and Project TEC2017-85244-C2-2-P, in part by the National Natural Science Foundation of China under Grant 42004011 and Grant 41874044, in part by the China Postdoctoral Science Foundation under Grant 2020M671646, in part by the Priority Academic Program Development (PAPD) of Jiangsu Higher Education Institutions (Science and Technology of Surveying and Mapping), and in part by the CommSensLab, which is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the AEI, Spain., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modeling the two- and three-dimensional displacement field in Lorca, Spain, subsidence and the global implications

  • Fernández Torres, José
  • Prieto Morin, Juan Francisco
  • Escayo Menéndez, Joaquín
  • Mallorquí Franquet, Jordi Joan
Land subsidence associated with overexploitation of aquifers is a hazard that commonly affects large areas worldwide. The Lorca area, located in southeast Spain, has undergone one of the highest subsidence rates in Europe as a direct consequence of long-term aquifer exploitation. Previous studies carried out on the region assumed that the ground deformation retrieved from satellite radar interferometry corresponds only to vertical displacement. Here we report, for the first time, the two- and three-dimensional displacement field over the study area using synthetic aperture radar (SAR) data from Sentinel-1A images and Global Navigation Satellite System (GNSS) observations. By modeling this displacement, we provide new insights on the spatial and temporal evolution of the subsidence processes and on the main governing mechanisms. Additionally, we also demonstrate the importance of knowing both the vertical and horizontal components of the displacement to properly characterize similar hazards. Based on these results, we propose some general guidelines for the sustainable management and monitoring of land subsidence related to anthropogenic activities., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interferometric orbit determination system for geosynchronous SAR missions: experimental proof of concept

  • Nicolás Álvarez, Jorge
  • Carreño Megias, Xavier
  • Ferrer Torres, Estel
  • Albert Galí, Miquel
  • Rodriguez Tersa, Judith
  • Aguasca Solé, Alberto
  • Broquetas Ibars, Antoni
Future Geosynchronous Synthetic Aperture Radar (GEOSAR) missions will provide permanent monitoring of continental areas of the planet with revisit times of less than 24 h. Several GEOSAR missions have been studied in the USA, Europe, and China with different applications, including water cycle monitoring and early warning of disasters. GEOSAR missions require unprecedented orbit determination precision in order to form focused Synthetic Aperture Radar (SAR) images from Geosynchronous Orbit (GEO). A precise orbit determination technique based on interferometry is proposed, including a proof of concept based on an experimental interferometer using three antennas separated 10–15 m. They provide continuous orbit observations of present communication satellites operating at GEO as illuminators of opportunity. The relative phases measured between the receivers are used to estimate the satellite position. The experimental results prove the interferometer is able to track GEOSAR satellites based on the transmitted signals. This communication demonstrates the consistency and feasibility of the technique in order to foster further research with longer interferometric baselines that provide observables delivering higher orbital precision., This work has been supported by the Spanish Science, Research and Innovation Plan (MICINN) with Project Codes TEC2017-85244-C2-2-P and PID2020-117303GB-C21 and by Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Collimated beam FMCW radar for vital sign patient monitoring

  • Prat, Arnau
  • Blanch Boris, Sebastián
  • Aguasca Solé, Alberto
  • Romeu Robert, Jordi
  • Broquetas Ibars, Antoni
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Patient monitoring of vital signals such as breathing rhythm and heart beat rate can be done remotely by the use of a radar system. This approach is advantageous since it does not require any contact with the patient. Obviously contactless monitoring results in a more comfortable situation for the patient, and in occasions it is almost mandatory as in the case of heavy burnt or newborn patients. Moreover, additional information such movement patterns are also available. A 120 GHz FMCW radar is described with special focus on the design, construction and testing of a specific reflector antenna for the system. The system is based on a commercial radar chipset that includes its own antennas. The challenge has been to design the optimum reflector and to build it and test it in a cost effective way. The reflector has been 3D printed and a near-field testing technique has been implemented to assess its performance. The results show that the system is able to measure the vital signs at distances beyond one meter., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

SMF-POLOPT: an adaptive multitemporal pol(DIn)SAR filtering and phase optimization algorithm for PSI applications

  • Zhao, Feng
  • Mallorquí Franquet, Jordi Joan
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Speckle noise and decorrelation can hamper the application and interpretation of PolSAR images. In this paper, a new adaptive multitemporal Pol(DIn)SAR filtering and phase optimization algorithm is proposed to address these limitations. This algorithm first categorizes and adaptively filters permanent scatterer (PS) and distributed scatterer (DS) pixels according to their polarimetric scattering mechanisms [i.e., the scattering-mechanism-based filtering (SMF)]. Then, two different polarimetric DInSAR (POLDInSAR) phase OPTimization methods are applied separately on the filtered PS and DS pixels (i.e., POLOPT). Finally, an inclusive pixel selection approach is used to identify high-quality pixels for ground deformation estimation. Thirty-one full-polarization Radarsat-2 SAR images over Barcelona (Spain) and 31 dual-polarization TerraSAR-X images over Murcia (Spain) have been used to evaluate the performance of the proposed algorithm. The PolSAR filtering results show that the speckle of PolSAR images has been well reduced with the preservation of details by the proposed SMF. The obtained ground deformation monitoring results have shown significant improvements, about ×7.2 (the full-polarization case) and ×3.8 (the dual-polarization case) with respect to the classical full-resolution single-pol amplitude dispersion method, on the valid pixels' densities. The excellent PolSAR filtering and ground deformation monitoring results achieved by the adaptive Pol(DIn)SAR filtering and phase optimization algorithm (i.e., the SMF-POLOPT) have validated the effectiveness of this proposed scheme., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving PSI processing of mining induced large deformations with external models

  • Du, Sen
  • Mallorquí Franquet, Jordi Joan
  • Fan, Hongdong
  • Zheng, Meinan
Ground subsidences, either caused by natural phenomena or human activities, can threaten the safety of nearby infrastructures and residents. Among the different causes, mining operations can trigger strong subsidence phenomena with a fast nonlinear temporal behaviour. Therefore, a reliable and precise deformation monitoring is of great significance for safe mining and protection of facilities located above or near the mined-out area. Persistent Scatterer Interferometry (PSI) is a technique that uses stacks Synthetic Aperture Radar (SAR) images to remotely monitor the ground deformation of large areas with a high degree of precision at a reasonable cost. Unfortunately, PSI presents limitations when monitoring large gradient deformations when there is phase ambiguity among adjacent Persistent Scatterer (PS) points. In this paper, an improvement of PSI processing, named as External Model-based Deformation Decomposition PSI (EMDD-PSI), is proposed to address this limitation by taking advantage of an external model. The proposed method first uses interferograms generated from SAR Single Look Complex (SLC) images to optimize the parameter adjustments of the external model. Then, the modelled spatial distribution of subsidence is utilized to reduce the fringes of the interferograms generated from the SAR images and to ease the PSI processing. Finally, the ground deformation is retrieved by jointly adding the external model and PSI results. In this paper, fourteen Radarsat-2 SAR images over Fengfeng mining area (China) are used to demonstrate the capabilities of the proposed method. The results are evaluated by comparing them with leveling data of the area covering the same temporal period. Results have shown that, after the optimization, the model is able to mimic the real deformation and the fringes of the interferograms can be effectively reduced. As a consequence, the large gradient deformation then can be better retrieved with the preservation of the nonlinear subsidence term. The ground truth shows that, comparing with the classical PSI and PSI with unadjusted parameters, the proposed scheme reduces the error by 35.2% and 20.4%, respectively., This research was funded by China Scholarship Council (grant No.201806420035); by the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO); by the State Research Agency (AEI); by the European Funds for Regional Development (EFRD) under project TEC2017-85244-C2-2-P; and by the CommSensLab. CommSensLab is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of 3-D printing technologies for millimeter-wave reflectors

  • Romeu Robert, Jordi
  • Blanch Boris, Sebastián
  • Vidal, Neus
  • Lopez-Villegas, Jose Maria
  • Aguasca Solé, Alberto
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Three different 3D printing technologies: Stereolithography (SLA), Fused Deposition Modeling (FDM) and HP Multi Jet Fusion Technology (MJF) are compared to build a parabolic reflector operating at 100 GHz. Fabrication tolerance and surface roughness before and after metallization are accurately measured. The performance of the reflectors is measured in the near field and its performance is compared against an optical grade reflector. In this way the performance of the final product is thoroughly assessed, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Coherency Matrix Decomposition-Based Polarimetric Persistent Scatterer Interferometry

  • Zhao, Feng
  • Mallorquí Franquet, Jordi Joan
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The rationale of polarimetric optimization techniques is to enhance the phase quality of the interferograms by combining adequately the different polarization channels available to produce an improved one. Different approaches have been proposed for polarimetric persistent scatterer interferometry (PolPSI). They range from the simple and computationally efficient BEST, where, for each pixel, the polarimetric channel with the best response in terms of phase quality is selected, to those with high-computational burden like the equal scattering mechanism (ESM) and the suboptimum scattering mechanism (SOM). BEST is fast and simple, but it does not fully exploit the potentials of polarimetry. On the other side, ESM explores all the space of solutions and finds the optimal one but with a very high-computational burden. A new PolPSI algorithm, named coherency matrix decomposition-based PolPSI (CMD-PolPSI), is proposed to achieve a compromise between phase optimization and computational cost. Its core idea is utilizing the polarimetric synthetic aperture radar (PolSAR) coherency matrix decomposition to determine the optimal polarization channel for each pixel. Three different PolSAR image sets of both full- (Barcelona) and dual-polarization (Murcia and Mexico City) are used to evaluate the performance of CMD-PolPSI. The results show that CMD-PolPSI presents better optimization results than the BEST method by using either $D_{\mathrm{ A}}$ or temporal mean coherence as phase quality metrics. Compared with the ESM algorithm, CMD-PolPSI is 255 times faster but its performance is not optimal. The influence of the number of available polarization channels and pixel's resolutions on the CMD-PolPSI performance is also discussed., Peer Reviewed, Postprint (author's final draft)