Pasar al contenido principal

SISTEMA AUTONOMO AIRE/TIERRA DE BAJA ALTURA PARA GEOLOCALIZACION DE INCENDIOS FORESTALES. MODELADO ELECTRO-TERMICO Y DISEÑO DE AMPLIFICADORES DE POTENCIA EFICIENTES.

TEC2017-88242-C3-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Dual-Band class J power amplifier at 2.45 and 5.8 GHz for UAVs communications

  • Morales Fernandez, Ainhoa
  • Fernández Barciela, Mónica
  • Isasi De Vicente, Fernando Guillermo
  • Martín Rodríguez, Fernando
  • Tasker, Paul J.
A hybrid dual-band power amplifier (PA) prototype working at two Industrial, Scientific and Medical (ISM) bands, 2.4-2.5 GHz and 5.725-5.875 GHz, was designed for Unmanned Aerial Vehicles (UAVs) communication applications in Spain. Initially, two single-band PA prototypes centered at each band were designed to evaluate the single-band achievable RF performance. In all the PAs, the Gallium Nitride (GaN) Qorvo HEMT TGF2977-SM was used, as well as microstrip transmission lines technology. To achieve wideband, good linearity and efficiency, the PAs were designed in class J. The measured results for the dual-band PA prototype at the 2dB compression point at the lower and higher bands, respectively, are 14.8 dB and 11.2 dB of Transducer Power Gain ( GT ), 35.7 dBm and 34.8 dBm of RF output power (Pout) and 59.2% and 43.5% of Drain Efficiency ( η ). At 3dB compression the respective lower and higher bands results are 37.9 dBm and 37 dBm of Pout and 73.9% and 55% of η ., Agencia Estatal de Investigación | Ref. TEC2017-88242-C3-2-R, Agencia Estatal de Investigación | Ref. PID2020-116569RB-C33
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Ultra-compact mm-wave monolithic IC doherty power amplifier for mobile handsets

  • Sajedin, Maryam
  • Elfergani, Issa
  • Rodríguez, Jonathan
  • Abd-Alhameed, Raed
  • Fernández Barciela, Mónica
  • Violas, Manuel
This work develops a novel dynamic load modulation Power Amplifier (PA) circuity that can provide an optimum compromise between linearity and efficiency while covering multiple cellular frequency bands. Exploiting monolithic microwave integrated circuits (MMIC) technology, a fully integrated 1W Doherty PA architecture is proposed based on 0.1 μm AlGaAs/InGaAs Depletion-Mode (D-Mode) technology provided by the WIN Semiconductors foundry. The proposed wideband DPA incorporates the harmonic tuning Class-J mode of operation, which aims to engineer the voltage waveform via second harmonic capacitive load termination. Moreover, the applied post-matching technique not only reduces the impedance transformation ratio of the conventional DPA, but also restores its proper load modulation. The simulation results indicate that the monolithic drive load modulation PA at 4 V operation voltage delivers 44% PAE at the maximum output power of 30 dBm at the 1 dB compression point, and 34% power-added efficiency (PAE) at 6 dB power back-off (PBO). A power gain flatness of around 14 ± 0.5 dB was achieved over the frequency band of 23 GHz to 27 GHz. The compact MMIC load modulation technique developed for the 5G mobile handset occupies the die area of 3.2 mm2., Fundação para a Ciência e a Tecnologia | Ref. UIDP/50008/2020, Agencia Estatal de Investigación | Ref. TEC2017-88242-C3-2-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A survey on RF and microwave doherty power amplifier for mobile handset applications

  • Sajedin, Maryam
  • Elfergani, I.T.E.
  • Rodríguez, Jonathan
  • Abd-Alhameed, Raed
  • Fernández Barciela, Mónica
This survey addresses the cutting-edge load modulation microwave and radio frequency power amplifiers for next-generation wireless communication standards. The basic operational principle of the Doherty amplifier and its defective behavior that has been originated by transistor characteristics will be presented. Moreover, advance design architectures for enhancing the Doherty power amplifier’s performance in terms of higher efficiency and wider bandwidth characteristics, as well as the compact design techniques of Doherty amplifier that meets the requirements of legacy 5G handset applications, will be discussed., Agencia Estatal de Investigación | Ref. TEC2017-88242-C3-2-R, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50008/2019
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Multi-resonant Class-F power amplifier design for 5G cellular networks

  • Sajedin, Maryam
  • Elfergani, Issa
  • Rodríguez, Jonathan
  • Violas, Manuel
  • Asharaa, Abdalfettah
  • Abd-Alhameed, Raed
  • Fernández Barciela, Mónica
  • Abdulkhaleq, Ahmed
This work integrates a harmonic tuning mechanism in synergy with the GaN HEMT transistor for 5G mobile transceiver applications. Following a theoretical study on the operational behavior of the Class-F power amplifier (PA), a complete amplifier design procedure is described that includes the proposed Harmonic Control Circuits for the second and third harmonics and optimum loading conditions for phase shifting of the drain current and voltage waveforms. The performance improvement provided by the Class-F configuration is validated by comparing the experimental and simulated results. The designed 10W Class-F PA prototype provides a measured peak drain efficiency of 64.7% at 1dB compression point of the PA at 3.6 GHz frequency., Agencia Estatal de Investigación | Ref. TEC2017-88242-C3-2-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Evaluation of admittance domain behavioural model complexity requirements for Power Amplifier design

  • Moure Fernández, María del Rocío
  • Casbon, Michael
  • Ladero Canle, Nicolás
  • Fernández Barciela, Mónica
  • Tasker, Paul J.
In the framework of Power Amplifier (PA) design for communications, frequency domain non-linear behavioural models have shown their potential as efficient complementary modelling tools when Field Effect Transistor compact models are not available or sufficiently accurate. The Admittance behavioural model, formulated in the V-I domain, is especially suitable for device size and fundamental frequency scaling. It is important to note that the direct extraction of this model, from the Nonlinear Vector Network Analyser (NVNA) load-pull (LP) measurements, requires some extra processing since it necessitates a Look-up-Table indexed to |V11| rather than |A11|. When using such models in PA design, there is the need for the user to select the necessary model complexity. To address this requirement, in this paper, a systematic analysis methodology, to guide the user, is presented and validated in different PA design scenarios. The methodology was tested using NVNA LP measurements of GaN Heterostructure FETs. A fifth order Admittance model formulation showed good accuracy in the studied PA design scenarios., Agencia Estatal de Investigación | Ref. TEC2017‐88242‐C3‐2‐R, Xunta de Galicia and European Regional Development Fund - ERDF| Ref. "Centro singular de investigación de Galicia accreditation 2019-2022, atlanTTic", Agencia Estatal de Investigación | Ref. PID2020-116569RB-C33