Pasar al contenido principal

PRODUCCION DE SOFTWARE ORIENTADO A SERVICIOS BASADA EN REQUISITOS: LA PARTE FUNCIONAL

TIN2010-19130-C02-02

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GoBIS: An integrated framework to analyse the goal and business process perspectives in information systems

  • Ruiz Carmona, Luz Marcela
  • Costal, Dolors
  • España Cubillo, Sergio
  • Franch, Xavier
  • Pastor López, Oscar|||0000-0002-1320-8471
[EN] Context Organisational reengineering, continuous process improvement, alignment among complementary analysis perspectives, and information traceability are some current motivations to promote investment and scientific effort for integrating goal and business process perspectives. Providing support to integrate information systems analysis becomes a challenge in this complex setting. Objective The GoBIS framework integrates two goal and business process modelling approaches: i⁎ (a goal-oriented modelling method) and Communication Analysis (a communication-oriented business process modelling method). Method In this paper, we describe the methodological integration of both methods with the aim of fulfilling several criteria: i) to rely on appropriate theories; ii) to provide abstract and concrete syntaxes; iii) to provide scenarios of application; iv) to develop tool support; v) to provide demonstrable benefits to potential adopters. Results We provide guidelines for using the two modelling methods in a top-down analysis scenario. The guidelines are validated by means of a comparative experiment and a focus-group session with students. Conclusions From a practitioner viewpoint (modeller and/or analyst), the guidelines facilitate the traceability between goal and business process models, the experimental results highlight the benefits of GoBIS in performance and usability perceptions, and demonstrate an improvement on the completeness of the latter having an impact on efficiency. From a researcher perspective, the validation has produced useful feedback for future research., This work has been supported by the Spanish MICINN Project ProS-Req (TIN2010-19130-C02-01, TIN2010-19130-C02-02) and EOSSAC (TIN2013-44641-P); the Generalitat Valenciana Project IDEO (PROMETEOII/2014/039); the FPI-UPV Pre-Doctoral Grant; the European Commission Project CaaS (FP7 611351); and the ERDF Structural Funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Supporting Navigation Accessibility Requirements in Web Engineering Methods

  • Moreno, L.
  • Valverde Giromé, Francisco
  • Martinez, P.
  • Pastor López, Oscar|||0000-0002-1320-8471
[EN] Web accessibility not only guarantees universal user access to the Web, but also provides interesting benefits for Web development. In order to achieve the goal of Web accessibility, an interesting approach is the incorporation of accessibility requirements into current Web engineering methods. This article presents the Accessibility for Web Applications (AWA) approach with the aim of integrating accessibility into Web engineering methods. The paper also discusses the application of the AWA approach to the Object- Oriented Web Solutions (OOWS) engineering method to produce accessible Web applications with a focus on navigational requirements. In order to demonstrate the practical applicability and usefulness of the approach, a proof of concept is described, the results of which indicating the satisfaction of navigation accessibility requirements. With the application of the AWA approach in the model-driven development (MDD) method, previously-defined OOWS models have been extended with the accessibility criteria, providing resources for the required changes in the process., This study has been developed with the support of the MAVIR Research Network (S2009/TIC-1542 [www.mavir.net/]), MULTIMEDICA PROJECT(tin201020644-c03-01) and the Spanish Ministry of Science and Innovation through the project, PROS-Req TIN2010-19130-C02-02. Co-financing was received from the ERDF.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Including Functional Usability Features in a Model-Driven Development Method

  • Panach Navarrete, José Ignacio
  • Juristo Juzgado, Natalia
  • Pastor López, Oscar|||0000-0002-1320-8471
The Software Engineering (SE) community has historically focused on working with models to represent functionality and persistence, pushing interaction modelling into the background, which has been covered by the Human Computer Interaction (HCI) community. Recently, adequately modelling interaction, and specifically usability, is being considered as a key factor for success in user acceptance, making the integration of the SE and HCI communities more necessary. If we focus on the Model-Driven Development (MDD) paradigm, we notice that there is a lack of proposals to deal with usability features from the very first steps of software development process. In general, usability features are manually implemented once the code has been generated from models. This contradicts the MDD paradigm, which claims that all the analysts effort must be focused on building models, and the code generation is relegated to model to code transformations. Moreover, usability features related to functionality may involve important changes in the system architecture if they are not considered from the early steps. We state that these usability features related to functionality can be represented abstractly in a conceptual model, and their implementation can be carried out automatically., This work has been developed with the support of MICINN (PROS-Req TIN2010-19130-C02-02, TIN2011-23216), UV (UV-INV-PRECOMP12-80627), GVA (ORCA PROMETEO /2009 /015), and co-financed with ERDF. We also acknowledge the support of the ITEA2 Call 3 UsiXML (20080026) and funding by the MITYC under the project TSI-020400-2011-20.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Proposal for Modelling Usability in a Holistic MDD Method

  • Panach Navarrete, José Ignacio
  • AQUINO SALVIONI, NATHALIE
  • Pastor López, Oscar|||0000-0002-1320-8471
Holistic methods for Model-Driven Development (MDD) aim to model all the system features in a conceptual model. This conceptual model is the input for a model compiler that can generate software systems by means of automatic transformations. However, in general, MDD methods focus on modelling the structure and functionality of systems, relegating the interaction and usability features to manual implementations at the last steps of the software development process. Some usability features are strongly related to the functionality of the system and their inclusion is not so easy. In order to facilitate the inclusion of functional usability features from the first steps of the development process and bring closer MDD methods to the holistic perspective, we propose a Usability Model. The Usability Model gathers conceptual primitives that represent functional usability features in a sufficiently abstract way so that the model can be used with different holistic MDD methods. This paper defines all the primitives that can be used to represent functional usability features. Moreover, we have defined a process to include the Usability Model in any MDD method without affecting its existing conceptual model. The proposal is based on model-to-model and model-to-code transformations. As proof of concept, we have applied our proposal to an existing MDD method called the OO-method and we have measured its efficiency. (C) 2013 Elsevier B.V. All rights reserved., This work has been developed with the support of MICINN (PROS-Req TIN2010-19130-C02-02), UV (UV-INV-PRECOMP13-115032), GVA (ORCA PROMETEO/2009/015), and co-financed with ERDF. We acknowledge the support of the ITEA2 Call 3 UsiXML (20080026) and funding by the MITYC (TSI-020400-2011-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An empirical approach for evaluating the usability of model-driven tools

  • Condori-Fernandez, Nelly
  • Panach Navarrete, José Ignacio
  • Baars, Arthur Iwan
  • Vos, Tanja Ernestina|||0000-0002-6003-9113
  • Pastor López, Oscar|||0000-0002-1320-8471
MDD tools are very useful to draw conceptual models and to automate code generation. Even though this would bring many benefits, wide adoption of MDD tools is not yet a reality. Various research activities are being undertaken to find why and to provide the required solutions. However, insufficient research has been done on a key factor for the acceptance of MDD tools: usability. With the help of end-users, this paper presents a framework to evaluate the usability of MDD tools. The framework will be used as a basis for a family of experiments to get clear insights into the barriers to usability that prevent MDD tools from being widely adopted in industry. To illustrate the applicability of our framework, we instantiated it for performing a usability evaluation of a tool named INTEGRANOVA. Furthermore, we compared the outcome of the study with another usability evaluation technique based on ergonomic criteria., This work has been developed with the support of the Intra European Marie Curie Fellowship Grant 50911302 PIEF-2010, MICINN (TIN2008-00555, PROS-Req TIN2010-19130-C02-02), GVA (ORCA PROMETEO/2009/015), and co-financed with ERDF. We also acknowledge the support of the ITEA2 Call 3 UsiXML (20080026) and financed by the MITYC under the project TSI-020400-2011-20. Our thanks also to Ignacio Romeu for the video data gathering setup.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A proposal to elicit usability requirements within a model-driven development environment

  • Ormeño Ayala, Yeshica Isela
  • Panach Navarrete, José Ignacio
  • Condori Fernández, Olinda Nelly
  • Pastor López, Oscar|||0000-0002-1320-8471
[EN] Nowadays there are sound Model-Driven Development (MDD) methods that deal with functional requirements, but in general, usability is not considered from the early stages of the development. Analysts that work with MDD implement usability features manually once the code has been generated. This manual implementation contradicts the MDD paradigm and it may involve much rework. This paper proposes a method to elicit usability requirements at early stages of the software development process such a way non-experts at usability can use it. The approach consists of organizing several interface design guidelines and usability guidelines in a tree structure. These guidelines are shown to the analyst through questions that she/he must ask to the end-user. Answers to these questions mark the path throughout the tree structure. At the end of the process, we gather all the answers of the end-user to obtain the set of usability requirements. If we represent usability requirements according to the conceptual models that compose the framework of a MDD method, these requirements can be the input for next steps of the software development process. The approach is validated with a laboratory demonstration., This work has been developed with the support of MICINN (PROS-Req TIN2010-19130-C02-02), UV (UV-INV-PRECOMP13-115032), GVA (ORCA PROMETEO/2009/015), and cofinanced with ERDF. We also acknowledge the support of the Intra European Marie Curie Fellowship Grant 50911302 PIEF-2010. We also thank Sergio España, Francisco Valverde, Marcela Ruiz and María Jose Villanueva for their participation in the experimental validation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Appling visual learning in the teaching of software measurement concepts

  • Cuadrado-Gallego, juan José
  • Martin Herrera, Borja
  • Marín, Beatriz
  • Pastor López, Oscar|||0000-0002-1320-8471
Applying new learning methodologies in education, such as visual learning based on virtual reality and three-dimensional (3D) environments, is an important aspect in education, since it offers possibilities that can remarkably improve the current education system. Technological advances, along with the chance to create and represent the varying contents offered by information technologies, make the new learning methodologies the focus of attention in the future. Currently, 3D methodologies are only used in Computer Science to improve physical characteristics (virtual laboratories, virtual worlds, etc.), but they are not used to improve the internal mental processes by which human beings understand and retain abstract concepts. In these cases, the use of visual learning helps to clarify them. In Computer Science, particularly in Software measurement courses, the complexity of the concepts is possibly greater than in other courses because there is a lot of learning material that is based on abstract concepts that students find hard to recognize in the real world. In this paper, we present a visual environment that can be used to learn software measurement concepts like the IFPUG functional size measurement method. To validate the new learning model, an experiment was carried out. © 2011 World Scientific Publishing Company., We would like to thank the Alcala University for supporting this research study through the research funds assigned to professor Cuadrado-Gallego under the program I3. We would also like to thank MEC under the project PROS-REQ TIN2010-19130-C02-02 and GVA ORCA PROMETEO/2009/015 for supporting this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using a functional size measurement procedure to evaluate the quality of models in MDD environments

  • Marín, Beatriz
  • ALAIN ABRAN
  • Giachetti-Herrera, Giovanni Andrés
  • Pastor López, Oscar|||0000-0002-1320-8471
  • Vos, Tanja Ernestina|||0000-0002-6003-9113
Models are key artifacts in Model-Driven Development (MDD) methods. To produce high-quality software by using MDD methods, quality assurance of models is of paramount importance. To evaluate the quality of models, defect detection is considered a suitable approach and is usually applied using reading techniques. However, these reading techniques have limitations and constraints, and new techniques are required to improve the efficiency at finding as many defects as possible. This article presents a case study that has been carried out to evaluate the use of a Functional Size Measurement (FSM) procedure in the detection of defects in models of an MDD environment. To do this, we compare the defects and the defect types found by an inspection group with the defects and the defect types found by the FSM procedure. The results indicate that the FSM is useful since it finds all the defects related to a specific defect type, it finds different defect types than an inspection group, and it finds defects related to the correctness and the consistency of the models., This work has been developed with the support of the Spanish Government under the projects PROS-REQ TIN2010-19130-C02-02 and GVA ORCA PROMETEO/2009/015.