Pasar al contenido principal

PRODUCCION DE SOFTWARE ORIENTADO A SERVICIOS BASADA EN REQUISITOS: LA PARTE NO-FUNCIONAL

TIN2010-19130-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GoBIS: An integrated framework to analyse the goal and business process perspectives in information systems

  • Ruiz Carmona, Luz Marcela
  • Costal, Dolors
  • España Cubillo, Sergio
  • Franch, Xavier
  • Pastor López, Oscar|||0000-0002-1320-8471
[EN] Context Organisational reengineering, continuous process improvement, alignment among complementary analysis perspectives, and information traceability are some current motivations to promote investment and scientific effort for integrating goal and business process perspectives. Providing support to integrate information systems analysis becomes a challenge in this complex setting. Objective The GoBIS framework integrates two goal and business process modelling approaches: i⁎ (a goal-oriented modelling method) and Communication Analysis (a communication-oriented business process modelling method). Method In this paper, we describe the methodological integration of both methods with the aim of fulfilling several criteria: i) to rely on appropriate theories; ii) to provide abstract and concrete syntaxes; iii) to provide scenarios of application; iv) to develop tool support; v) to provide demonstrable benefits to potential adopters. Results We provide guidelines for using the two modelling methods in a top-down analysis scenario. The guidelines are validated by means of a comparative experiment and a focus-group session with students. Conclusions From a practitioner viewpoint (modeller and/or analyst), the guidelines facilitate the traceability between goal and business process models, the experimental results highlight the benefits of GoBIS in performance and usability perceptions, and demonstrate an improvement on the completeness of the latter having an impact on efficiency. From a researcher perspective, the validation has produced useful feedback for future research., This work has been supported by the Spanish MICINN Project ProS-Req (TIN2010-19130-C02-01, TIN2010-19130-C02-02) and EOSSAC (TIN2013-44641-P); the Generalitat Valenciana Project IDEO (PROMETEOII/2014/039); the FPI-UPV Pre-Doctoral Grant; the European Commission Project CaaS (FP7 611351); and the ERDF Structural Funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Integrating the goal and business process perspectives in information system analysis

  • Ruiz Carmona, Luz Marcela
  • Costal, Dolors
  • España Cubillo, Sergio
  • Franch, Xavier
  • Pastor López, Oscar|||0000-0002-1320-8471
There are several motivations to promote investment and scientific effort in the integration of intentional and operational perspectives: organisa- tional reengineering, continuous improvement of business processes, alignment among complementary analysis perspectives, information traceability, etc. In this paper we propose the integration of two modelling languages that support the creation of goal and business process models: the i* goal-oriented modelling method and Communication Analysis, a communication-oriented business process modelling method. We describe the methodological integration of the two modelling methods with the aim of fulfilling several criteria: i) to rely on appropriate theories; ii) to provide abstract and concrete syntaxes; iii) to provide scenarios of application; and iv) to develop tool support. We provide guidelines for using the two modelling methods in a top-down analysis scenario. We also present an illustrative case that demonstrates the feasibility of the approach., This work has been supported by the Spanish MICINN PROS-Req (TIN2010-19130-C02-01, TIN2010-19130-C02-02); the Generalitat Valenciana ORCA (PROMETEO/2009/015); the FPI-UPV pre-doctoral grant; the European Commission FP7 Project CaaS (611351); and the ERDF structural funds.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Monitoring the service-based system lifecycle with SALMon

  • Oriol Hilari, Marc|||0000-0003-1928-7024
  • Franch Gutiérrez, Javier|||0000-0001-9733-8830
  • Marco Gómez, Jordi|||0000-0002-0078-7929
Context and motivation: Service-Based Systems are highly dynamic software systems composed of several web services. In contrast to other types of systems, Service-Based Systems rely on service providers to ensure that their web services comply with the agreed Quality of Service. Delivering an adequate Quality of Service is a critical and significant challenge that requires monitoring along the different activities in the Service-Based System's lifecycle.; Question/problem: Current monitoring systems are designed to support specific activities (e.g. service selection, adaptation, etc.), but do not fulfil the requirements of all the activities in the Service-Based System's lifecycle.; Principal ideas/results: In this paper, we present SALMon, a QoS monitoring framework able to support the whole Service-Based System's lifecycle. SALMon is highly versatile, since it combines different strategies for its configuration (model-based and invocation-based) and for the way it gets the Quality of Service (passive monitoring and online testing). Furthermore, its architecture supports easy extensibility with new quality attributes, independence of the technology of the monitored services and interoperability with other tools. We conducted a performance evaluation over real web services using suitable estimators for response time and evaluated both its overhead and capacity.; Contribution: SALMon provides infrastructure that can be used in very different scenarios, as exemplified in this paper, both in terms of the lifecycle's phase addressed and the type of system (pure Service-Oriented Architecture, cloud-based systems, etc.). This diversity of situations addressed makes SALMon a significant contribution both for practitioners that may be interested in integrating a working technology in their software solutions, and for researchers who can conduct their investigation on top of a reliable infrastructure., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Quality models for web services: a systematic mapping

  • Oriol Hilari, Marc|||0000-0003-1928-7024
  • Marco Gómez, Jordi|||0000-0002-0078-7929
  • Franch Gutiérrez, Javier|||0000-0001-9733-8830
Context: Quality of Service (QoS) is a major issue in various web service related activities. Quality models have been proposed as the engineering artefact to provide a common framework of understanding for QoS, by defining the quality factors that apply to web service usage.; Objective: The goal of this study is to evaluate the current state of the art of the proposed quality models for web services, specifically: (1) which are these proposals and how are they related; (2) what are their structural characteristics; (3) what quality factors are the most and least addressed; and (4) what are their most consolidated definitions.; Method: We have conducted a systematic mapping by defining a robust protocol that combines automatic and manual searches from different sources. We used a rigorous method to elicitate the keywords from the research questions and a selection criteria to retrieve the final papers to evaluate. We have adopted the ISO/IEC 25010 standard to articulate our analysis.; Results: We have evaluated 47 different quality models from 65 papers that fulfilled the selection criteria. By analyzing in depth these quality models, we have: (1) distributed the proposals along the time dimension and identified their relationships; (2) analyzed their size (visualizing the number of nodes and levels) and definition coverage (as indicator of quality of the proposals); (3) quantified the coverage of the different ISO/IEC 25010 quality factors by the proposals; (4) identified the quality factors that appeared in at least 30% of the surveyed proposals and provided the most consolidated definitions for them.; Conclusions: We believe that this panoramic view on the anatomy of the quality models for web services may be a good reference for prospective researchers and practitioners in the field and especially may help avoiding the definition of new proposals that do not align with current research., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adding semantic modules to improve goal-oriented analysis of data warehouses using I-star

  • Mate, Alejandro
  • Trujillo Mondejar, Juan Carlos
  • Franch Gutiérrez, Javier|||0000-0001-9733-8830
The success rate of data warehouse (DW) development is improved by performing a requirements elicitation stage in which the users' needs are modeled. Currently, among the different proposals for modeling requirements, there is a special focus on goal-oriented models, and in particular on the i* framework. In order to adapt this framework for DW development, we previously developed a UML profile for DWs. However, as the general i* framework, the proposal lacks modularity. This has a specially negative impact for DW development, since DW requirement models tend to include a huge number of elements with crossed relationships between them. In turn, the readability of the models is decreased, harming their utility and increasing the error rate and development time. In this paper, we propose an extension of our i* profile for DWs considering the modularization of goals. We provide a set of guidelines in order to correctly apply our proposal. Furthermore, we have performed an experiment in order to assess the validity our proposal. The benefits of our proposal are an increase in the modularity and scalability of the models which, in turn, increases the error correction capability, and makes complex models easier to understand by DW developers and non expert users., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Requirements reuse and patterns: a survey

  • Palomares Bonache, Cristina|||0000-0003-4722-5584
  • Franch Gutiérrez, Javier|||0000-0001-9733-8830
  • Quer, Carme|||0000-0002-9000-6371
Context and motivation: Multiple proposals exist that propose the adoption of reuse practices during requirements engineering processes. Question/problem: Which is the current level of adoption of these practices in organizations? Principal ideas/results: In this paper we present the preliminary results of a survey initiated at REFSQ’13 that addresses this question. The survey first investigates requirements reuse in general, and then goes in depth asking about a specific technique, software requirement patterns (SRP), which is the backbone of our PABRE framework. Contribution: The survey results show that requirements reuse is not a widespread practice in IT projects, being the most common techniques those based on the copy and later modification by hand of requirements coming from previous projects. Regarding the use of SRP, the results seem to support our hypothesis that SRP could help to ameliorate some common problems related to requirements specifications like lack of uniformity and incompleteness., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Requirements reuse and patterns: a survey

  • Palomares Bonache, Cristina
  • Franch Gutiérrez, Javier
  • Quer, Carme
Context and motivation: Multiple proposals exist that propose the adoption of reuse practices during requirements engineering processes. Question/problem: Which is the current level of adoption of these practices in organizations? Principal ideas/results: In this paper we present the preliminary results of a survey initiated at REFSQ’13 that addresses this question. The survey first investigates requirements reuse in general, and then goes in depth asking about a specific technique, software requirement patterns (SRP), which is the backbone of our PABRE framework. Contribution: The survey results show that requirements reuse is not a widespread practice in IT projects, being the most common techniques those based on the copy and later modification by hand of requirements coming from previous projects. Regarding the use of SRP, the results seem to support our hypothesis that SRP could help to ameliorate some common problems related to requirements specifications like lack of uniformity and incompleteness., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Monitoring the service-based system lifecycle with SALMon

  • Oriol Hilari, Marc
  • Franch Gutiérrez, Javier
  • Marco Gómez, Jordi
Context and motivation: Service-Based Systems are highly dynamic software systems composed of several web services. In contrast to other types of systems, Service-Based Systems rely on service providers to ensure that their web services comply with the agreed Quality of Service. Delivering an adequate Quality of Service is a critical and significant challenge that requires monitoring along the different activities in the Service-Based System's lifecycle.; Question/problem: Current monitoring systems are designed to support specific activities (e.g. service selection, adaptation, etc.), but do not fulfil the requirements of all the activities in the Service-Based System's lifecycle.; Principal ideas/results: In this paper, we present SALMon, a QoS monitoring framework able to support the whole Service-Based System's lifecycle. SALMon is highly versatile, since it combines different strategies for its configuration (model-based and invocation-based) and for the way it gets the Quality of Service (passive monitoring and online testing). Furthermore, its architecture supports easy extensibility with new quality attributes, independence of the technology of the monitored services and interoperability with other tools. We conducted a performance evaluation over real web services using suitable estimators for response time and evaluated both its overhead and capacity.; Contribution: SALMon provides infrastructure that can be used in very different scenarios, as exemplified in this paper, both in terms of the lifecycle's phase addressed and the type of system (pure Service-Oriented Architecture, cloud-based systems, etc.). This diversity of situations addressed makes SALMon a significant contribution both for practitioners that may be interested in integrating a working technology in their software solutions, and for researchers who can conduct their investigation on top of a reliable infrastructure., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adding semantic modules to improve goal-oriented analysis of data warehouses using I-star

  • Mate, Alejandro
  • Trujillo Mondejar, Juan Carlos
  • Franch Gutiérrez, Javier
The success rate of data warehouse (DW) development is improved by performing a requirements elicitation stage in which the users' needs are modeled. Currently, among the different proposals for modeling requirements, there is a special focus on goal-oriented models, and in particular on the i* framework. In order to adapt this framework for DW development, we previously developed a UML profile for DWs. However, as the general i* framework, the proposal lacks modularity. This has a specially negative impact for DW development, since DW requirement models tend to include a huge number of elements with crossed relationships between them. In turn, the readability of the models is decreased, harming their utility and increasing the error rate and development time. In this paper, we propose an extension of our i* profile for DWs considering the modularization of goals. We provide a set of guidelines in order to correctly apply our proposal. Furthermore, we have performed an experiment in order to assess the validity our proposal. The benefits of our proposal are an increase in the modularity and scalability of the models which, in turn, increases the error correction capability, and makes complex models easier to understand by DW developers and non expert users., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quality models for web services: a systematic mapping

  • Oriol Hilari, Marc
  • Marco Gómez, Jordi
  • Franch Gutiérrez, Javier
Context: Quality of Service (QoS) is a major issue in various web service related activities. Quality models have been proposed as the engineering artefact to provide a common framework of understanding for QoS, by defining the quality factors that apply to web service usage.; Objective: The goal of this study is to evaluate the current state of the art of the proposed quality models for web services, specifically: (1) which are these proposals and how are they related; (2) what are their structural characteristics; (3) what quality factors are the most and least addressed; and (4) what are their most consolidated definitions.; Method: We have conducted a systematic mapping by defining a robust protocol that combines automatic and manual searches from different sources. We used a rigorous method to elicitate the keywords from the research questions and a selection criteria to retrieve the final papers to evaluate. We have adopted the ISO/IEC 25010 standard to articulate our analysis.; Results: We have evaluated 47 different quality models from 65 papers that fulfilled the selection criteria. By analyzing in depth these quality models, we have: (1) distributed the proposals along the time dimension and identified their relationships; (2) analyzed their size (visualizing the number of nodes and levels) and definition coverage (as indicator of quality of the proposals); (3) quantified the coverage of the different ISO/IEC 25010 quality factors by the proposals; (4) identified the quality factors that appeared in at least 30% of the surveyed proposals and provided the most consolidated definitions for them.; Conclusions: We believe that this panoramic view on the anatomy of the quality models for web services may be a good reference for prospective researchers and practitioners in the field and especially may help avoiding the definition of new proposals that do not align with current research., Peer Reviewed, Postprint (author's final draft)