Pasar al contenido principal

ROBINSTRUCT: INSTRUYENDO ROBOTS USANDO HABILIDADES COMUNICATIVAS NATURALES

TIN2014-58178-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Incremental learning of skills in a task-parameterized Gaussian mixture model

  • Hoyos, Jose
  • Prieto, Flavio
  • Alenyà, Guillem
  • Torras, Carme
Programming by demonstration techniques facilitate the programming of robots. Some of them allow the generalization of tasks through parameters, although they require new training when trajectories different from the ones used to estimate the model need to be added. One of the ways to re-train a robot is by incremental learning, which supplies additional information of the task and does not require teaching the whole task again. The present study proposes three techniques to add trajectories to a previously estimated task-parameterized Gaussian mixture model. The first technique estimates a new model by accumulating the new trajectory and the set of trajectories generated using the previous model. The second technique permits adding to the parameters of the existent model those obtained for the new trajectories. The third one updates the model parameters by running a modified version of the Expectation-Maximization algorithm, with the information of the new trajectories. The techniques were evaluated in a simulated task and a real one, and they showed better performance than that of the existent model., This work has been partially funded by Universidad del Quindio (Colombia) and by the Spanish Ministry of Economy and Competitiveness under project Robinstruct TIN2014-58178-R, and by the CSIC project TextilRob 201550E028., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sequential non-rigid structure from motion using physical priors

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
  • Calvo, Begoña
  • Montiel, J. M. M.
We propose a new approach to simultaneously recover camera pose and 3D shape of non-rigid and potentially extensible surfaces from a monocular image sequence. For this purpose, we make use of the Extended Kalman Filter based Simultaneous Localization And Mapping (EKF-SLAM) formulation, a Bayesian optimization framework traditionally used in mobile robotics for estimating camera pose and reconstructing rigid scenarios. In order to extend the problem to a deformable domain we represent the object's surface mechanics by means of Navier's equations, which are solved using a Finite Element Method (FEM). With these main ingredients, we can further model the material's stretching, allowing us to go a step further than most of current techniques, typically constrained to surfaces undergoing isometric deformations. We extensively validate our approach in both real and synthetic experiments, and demonstrate its advantages with respect to competing methods. More specifically, we show that besides simultaneously retrieving camera pose and non-rigid shape, our approach is adequate for both isometric and extensible surfaces, does not require neither batch processing all the frames nor tracking points over the whole sequence and runs at several frames per second., This work was partly funded by the MINECO projects Abdomesh DPI2011-27939-C02-01, RobInstruct TIN2014-58178-R and SVMap DPI2012-32168; by the ERA-net CHISTERA project VISEN PCIN-2013-047; and by a scholarship FPU12/04886 from the Spanish MECD., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Execution fault recovery in robot programming by demonstration using multiple models

  • Hoyos, Jose
  • Prieto, Flavio
  • Alenyà, Guillem
  • Torras, Carme
Deformable object (e.g., clothes) manipulation by a robot in interaction with a human being presents several interesting challenges. Due to texture and deformability, the object can get hooked in the human limbs. Moreover, the human can change their limbs position and curvature, which require changes in the paths to be followed by the robot. To help solve these problems, in this paper we propose a technique of learning by demonstration able to adapt to changes in position and curvature of the object (human limb) and recover from execution faults (hooks). The technique is tested using simulations, but with data obtained from a real robot., Este trabajo fue financiado por la Universidad Nacional de Colombia y la Universidad del Quindío, y parcialmente por los proyectos Robinstruct (MINECO TIN2014-58178-R) y I-DRESS (ERA-net CHISTERA PCIN-2015-147)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time 3D reconstruction of non-rigid shapes with a single moving camera

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
  • Calvo, Begoña
  • Montiel, J. M. M.
This paper describes a real-time sequential method to simultaneously recover the camera motion and the 3D shape of deformable objects from a calibrated monocular video. For this purpose, we consider the Navier-Cauchy equations used in 3D linear elasticity and solved by finite elements, to model the time-varying shape per frame. These equations are embedded in an extended Kalman filter, resulting in sequential Bayesian estimation approach. We represent the shape, with unknown material properties, as a combination of elastic elements whose nodal points correspond to salient points in the image. The global rigidity of the shape is encoded by a stiffness matrix, computed after assembling each of these elements. With this piecewise model, we can linearly relate the 3D displacements with the 3D acting forces that cause the object deformation, assumed to be normally distributed. While standard finite-element-method techniques require imposing boundary conditions to solve the resulting linear system, in this work we eliminate this requirement by modeling the compliance matrix with a generalized pseudoinverse that enforces a pre-fixed rank. Our framework also ensures surface continuity without the need for a post-processing step to stitch all the piecewise reconstructions into a global smooth shape. We present experimental results using both synthetic and real videos for different scenarios ranging from isometric to elastic deformations. We also show the consistency of the estimation with respect to 3D ground truth data, include several experiments assessing robustness against artifacts and finally, provide an experimental validation of our performance in real time at frame rate for small maps., This work has been partially supported by the Spanish Ministry of Science and Innovation under projects RT-SLAM DPI2015-67275-P, RobInstruct TIN2014-58178-R and Keratocono DPI2014-54981-R; by the FP7-SME-2013 606634 PopCorn project from the European Union FP7; by the ERA-net CHISTERA project VISEN PCIN-2013-047 and I-DRESS PCIN-2015-147; and by a scholarship FPU12/04886 awarded by the Spanish MECD., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining semantic and geometric features for object class segmentation of indoor scenes

  • Husain, Farzad
  • Schulz, Hannes
  • Dellen, Babette
  • Torras, Carme
  • Behnke, Sven
Scene understanding is a necessary prerequisite for robots acting autonomously in complex environments. Low-cost RGB-D cameras such as Microsoft Kinect enabled new methods for analyzing indoor scenes and are now ubiquitously used in indoor robotics. We investigate strategies for efficient pixelwise object class labeling of indoor scenes that combine both pretrained semantic features transferred from a large color image dataset and geometric features, computed relative to the room structures, including a novel distance-from-wall feature, which encodes the proximity of scene points to a detected major wall of the room. We evaluate our approach on the popular NYU v2 dataset. Several deep learning models are tested, which are designed to exploit different characteristics of the data. This includes feature learning with two different pooling sizes. Our results indicate that combining semantic and geometric features yields significantly improved results for the task of object class segmentation., This research is partially funded by the CSIC project MANIPlus (201350E102), and the project RobInstruct (TIN2014-58178-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Action recognition based on efficient deep feature learning in the spatio-temporal domain

  • Husain, Farzad
  • Dellen, Babette
  • Torras, Carme
Hand-crafted feature functions are usually designed based on the domain knowledge of a presumably controlled environment and often fail to generalize, as the statistics of real-world data cannot always be modeled correctly. Data-driven feature learning methods, on the other hand, have emerged as an alternative that often generalize better in uncontrolled environments. We present a simple, yet robust, 2-D convolutional neural network extended to a concatenated 3-D network that learns to extract features from the spatio-temporal domain of raw video data. The resulting network model is used for content-based recognition of videos. Relying on a 2-D convolutional neural network allows us to exploit a pretrained network as a descriptor that yielded the best results on the largest and challenging ILSVRC-2014 dataset. Experimental results on commonly used benchmarking video datasets demonstrate that our results are state-of-the-art in terms of accuracy and computational time without requiring any preprocessing (e.g., optic flow) or a priori knowledge on data capture (e.g., camera motion estimation), which makes it more general and flexible than other approaches. Our implementation is made available., This research is partially funded by the CSIC project TextilRob (201550E028), and the project RobInstruct (TIN2014-58178-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A 3D descriptor to detect task-oriented grasping points in clothing

  • Ramisa, Arnau
  • Alenyà, Guillem
  • Moreno-Noguer, Francesc
  • Torras, Carme
Manipulating textile objects with a robot is a challenging task, especially because the garment perception is difficult due to the endless configurations it can adopt, coupled with a large variety of colors and designs. Most current approaches follow a multiple re-grasp strategy, in which clothes are sequentially grasped from different points until one of them yields a recognizable configuration. In this work we propose a method that combines 3D and appearance information to directly select a suitable grasping point for the task at hand, which in our case consists of hanging a shirt or a polo shirt from a hook. Our method follows a coarse-to-fine approach in which, first, the collar of the garment is detected and, next, a grasping point on the lapel is chosen using a novel 3D descriptor. In contrast to current 3D descriptors, ours can run in real time, even when it needs to be densely computed over the input image. Our central idea is to take advantage of the structured nature of range images that most depth sensors provide and, by exploiting integral imaging, achieve speed-ups of two orders of magnitude with respect to competing approaches, while maintaining performance. This makes it especially adequate for robotic applications as we thoroughly demonstrate in the experimental section., This research is partially funded by the Spanish Ministry of Economy and Competitiveness under project TIN2014-58178-R, by the CSIC project MANIPlus (201350E102), and by the ERA-Net CHISTERA projects ViSen PCIN-2013-047 and I-DRESS PCIN-2015-147. A. Ramisa worked under the JAE-DOC grant from CSIC and FSE. The authors are grateful to the Nvidia donation program for its support with GPU cards., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Bayesian approach to simultaneously recover camera pose and non-rigid shape from monocular images

  • Moreno-Noguer, Francesc
  • Porta, Josep M.
In this paper we bring the tools of the Simultaneous Localization and Map Building (SLAM) problem from a rigid to a deformable domain and use them to simultaneously recover the 3D shape of non-rigid surfaces and the sequence of poses of a moving camera. Under the assumption that the surface shape may be represented as a weighted sum of deformation modes, we show that the problem of estimating the modal weights along with the camera poses, can be probabilistically formulated as a maximum a posteriori estimate and solved using an iterative least squares optimization. In addition, the probabilistic formulation we propose is very general and allows introducing different constraints without requiring any extra complexity. As a proof of concept, we show that local inextensibility constraints that prevent the surface from stretching can be easily integrated. An extensive evaluation on synthetic and real data, demonstrates that our method has several advantages over current non-rigid shape from motion approaches. In particular, we show that our solution is robust to large amounts of noise and outliers and that it does not need to track points over the whole sequence nor to use an initialization close from the ground truth., This work has been partially funded by Spanish Ministry of Economy and Competitiveness under projects RobInstruct TIN2014-58178-R and RobCab DPI2014-57220-C2-2-P; and by the ERA-net CHISTERA project I-DRESS PCIN-2015-147., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interactive multiple object learning with scanty human supervision

  • Villamizar, Michael
  • Garrell, Anaís
  • Sanfeliu, Alberto
  • Moreno-Noguer, Francesc
We present a fast and online human-robot interaction approach that progressively learns multiple object classifiers using scanty human supervision. Given an input video stream recorded during the human-robot interaction, the user just needs to annotate a small fraction of frames to compute object specific classifiers based on random ferns which share the same features. The resulting methodology is fast (in a few seconds, complex object appearances can be learned), versatile (it can be applied to unconstrained scenarios), scalable (real experiments show we can model up to 30 different object classes), and minimizes the amount of human intervention by leveraging the uncertainty measures associated to each classifier. We thoroughly validate the approach on synthetic data and on real sequences acquired with a mobile platform in indoor and outdoor scenarios containing a multitude of different objects. We show that with little human assistance, we are able to build object classifiers robust to viewpoint changes, partial occlusions, varying lighting and cluttered backgrounds., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness under projects ERA-Net Chistera project ViSen PCIN-2013-047, RobInstruct TIN2014-58178-R, ROBOT-INT-COOP DPI2013-42458-P, and by the EU project AEROARMS H2020-ICT-2014-1-644271., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Trajectory generation for unmanned aerial manipulators through quadratic programming

  • Rossi, Roberto
  • Santamaria-Navarro, Àngel
  • Andrade-Cetto, Juan
  • Rocco, Paolo
In this paper a trajectory generation approach using quadratic programming is described for aerial manipulation, i.e. for the control of an aerial vehicle equipped with a robot arm. The proposed approach applies the online active set strategy to generate a feasible trajectory of the joints, in order to accomplish a set of tasks with defined bounds and constraint inequalities. The definition of the problem in the acceleration domain allows to integrate and perform a large set of tasks and, as a result, to obtain smooth motion of the joints. A weighting strategy, associated with a normalization procedure, allows to easily define the relative importance of the tasks. This approach is useful to accomplish different phases of a mission with different redundancy resolution strategies. The performance of the proposed technique is demonstrated through real experiments with all the algorithms running onboard in real time. In particular, the aerial manipulator can successfully perform navigation and interaction phases, while keeping motion within prescribed bounds and avoiding collisions with external obstacles., Their work has been partially funded by the EU project AEROARMS H2020-ICT2014-1-644271 and by the Spanish Ministry of Economy and Competitiveness project ROBINSTRUCT TIN2014-58178-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uncalibrated visual servo for unmanned aerial manipulation

  • Santamaria-Navarro, Àngel
  • Grosch, Patrick
  • Lippiello, Vincenzo
  • Solà, Joan
  • Andrade-Cetto, Juan
This paper addresses the problem of autonomous servoing an unmanned redundant aerial manipulator using computer vision. The overactuation of the system is exploited by means of a hierarchical control law, which allows to prioritize several tasks during flight. We propose a safety-related primary task to avoid possible collisions. As a secondary task, we present an uncalibrated image-based visual servo strategy to drive the arm end-effector to a desired position and orientation by using a camera attached to it. In contrast to the previous visual servo approaches, a known value of camera focal length is not strictly required. To further improve flight behavior, we hierarchically add one task to reduce dynamic effects by vertically aligning the arm center of gravity to the multirotor gravitational vector, and another one that keeps the arm close to a desired configuration of high manipulability and avoiding arm joint limits. The performance of the hierarchical control law, with and without activation of each of the tasks, is shown in simulations and in real experiments confirming the viability of such prioritized control scheme for aerial manipulation., This work has been funded by the EU project AEROARMS H2020-ICT2014-1-644271 and by the Spanish Ministry of Economy and Competitiveness project ROBINSTRUCT TIN2014-58178-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Visual grasp point localization, classification and state recognition in robotic manipulation of cloth: An overview

  • Jiménez Schlegl, Pablo
Cloth manipulation by robots is gaining popularity among researchers because of its relevance, mainly (but not only) in domestic and assistive robotics. The required science and technologies begin to be ripe for the challenges posed by the manipulation of soft materials, and many contributions have appeared in the last years. This survey provides a systematic review of existing techniques for the basic perceptual tasks of grasp point localization, state estimation and classification of cloth items, from the perspective of their manipulation by robots. This choice is grounded on the fact that any manipulative action requires to instruct the robot where to grasp, and most garment handling activities depend on the correct recognition of the type to which the particular cloth item belongs and its state. The high inter- and intraclass variability of garments, the continuous nature of the possible deformations of cloth and the evident difficulties in predicting their localization and extension on the garment piece are challenges that have encouraged the researchers to provide a plethora of methods to confront such problems, with some promising results. The present review constitutes for the first time an effort in furnishing a structured framework of these works, with the aim of helping future contributors to gain both insight and perspective on the subject., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under projects RobInstruct (TIN2014-58178-R) and I-DRESS: Assistive interactive robotic system for support in dressing (PCIN-2015-147)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Word ordering and document adjacency for large loop closure detection in 2D laser maps

  • Deray, Jeremie
  • Solà, Joan
  • Andrade-Cetto, Juan
We address in this paper the problem of loop closure detection for laser-based simultaneous localization and mapping (SLAM) of very large areas. Consistent with the state of the art, the map is encoded as a graph of poses, and to cope with very large mapping capabilities, loop closures are asserted by comparing the features extracted from a query laser scan against a previously acquired corpus of scan features using a bag-ofwords (BoW) scheme. Two contributions are here presented. First, to benefit from the graph topology, feature frequency scores in the BoW are computed not only for each individual scan but also from neighboring scans in the SLAM graph. This has the effect of enforcing neighbor relational information during document matching. Secondly, a weak geometric check that takes into account feature ordering and occlusions is introduced that substantially improves loop closure detection performance. The two contributions are evaluated both separately and jointly on four common SLAM datasets, and are shown to improve the state-of-the-art performance both in terms of precision and recall in most of the cases. Moreover, our current implementation is designed to work at nearly frame rate, allowing loop closure query resolution at nearly 22 Hz for the best case scenario and 2 Hz for the worst case scenario., This work was supported by the Spanish Ministry of Economy and Competitiveness project ROBINSTRUCT TIN2014-58178-R, the EU H2020 LOGMATIC project 687534, and the Industrial Doctoral program of the Catalan Agency for Management of University and Research Grants., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D human pose tracking priors using geodesic mixture models

  • Simo-Serra, Edgar
  • Torras, Carme
  • Moreno-Noguer, Francesc
We present a novel approach for learning a finite mixture model on a Riemannian manifold in which Euclidean metrics are not applicable and one needs to resort to geodesic distances consistent with the manifold geometry. For this purpose, we draw inspiration on a variant of the expectation-maximization algorithm, that uses a minimum message length criterion to automatically estimate the optimal number of components from multivariate data lying on an Euclidean space. In order to use this approach on Riemannian manifolds, we propose a formulation in which each component is defined on a different tangent space, thus avoiding the problems associated with the loss of accuracy produced when linearizing the manifold with a single tangent space. Our approach can be applied to any type of manifold for which it is possible to estimate its tangent space. Additionally, we consider using shrinkage covariance estimation to improve the robustness of the method, especially when dealing with very sparsely distributed samples. We evaluate the approach on a number of situations, going from data clustering on manifolds to combining pose and kinematics of articulated bodies for 3D human pose tracking. In all cases, we demonstrate remarkable improvement compared to several chosen baselines., This work was partly funded by the Spanish MINECO project RobInstruct TIN2014-58178-R and by the ERA-net CHISTERA project I-DRESS PCIN-2015-147., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining local-physical and global-statistical models for sequential deformable shape from motion

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
In this paper, we simultaneously estimate camera pose and non-rigid 3D shape from a monocular video, using a sequential solution that combines local and global representations. We model the object as an ensemble of particles, each ruled by the linear equation of the Newton’s second law of motion. This dynamic model is incorporated into a bundle adjustment framework, in combination with simple regularization components that ensure temporal and spatial consistency. The resulting approach allows to sequentially estimate shape and camera poses, while progressively learning a global low-rank model of the shape that is fed back into the optimization scheme, introducing thus, global constraints. The overall combination of local (physical) and global (statistical) constraints yields a solution that is both efficient and robust to several artifacts such as noisy and missing data or sudden camera motions, without requiring any training data at all. Validation is done in a variety of real application domains, including articulated and non-rigid motion, both for continuous and discontinuous shapes. Our on-line methodology yields significantly more accurate reconstructions than competing sequential approaches, being even comparable to the more computationally demanding batch methods., This work has been partially supported by the Spanish Ministry of Science and Innovation under project RobInstruct TIN2014-58178-R; by a scholarship FPU12/04886 from the Spanish MECD; and by the ERA-net CHISTERA projects VISEN PCIN-2013-047 and I-DRESS PCIN-2015-147., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Relational reinforcement learning for planning with exogenous effects

  • Martínez, David
  • Alenyà, Guillem
  • Ribeiro, Tony
  • Inoue, Katsumi
  • Torras, Carme
Probabilistic planners have improved recently to the point that they can solve difficult tasks with complex and expressive models. In contrast, learners cannot tackle yet the expressive models that planners do, which forces complex models to be mostly handcrafted. We propose a new learning approach that can learn relational probabilistic models with both action effects and exogenous effects. The proposed learning approach combines a multivalued variant of inductive logic programming for the generation of candidate models, with an optimization method to select the best set of planning operators to model a problem. We also show how to combine this learner with reinforcement learning algorithms to solve complete problems. Finally, experimental validation is provided that shows improvements over previous work in both simulation and a robotic task. The robotic task involves a dynamic scenario with several agents where a manipulator robot has to clear the tableware on a table. We show that the exogenous effects learned by our approach allowed the robot to clear the table in a more efficient way., This work has been supported by the MINECO project RobInstruct TIN2014-58178-R and the European Union’s Horizon 2020 research and innovation programme under grant agreement H2020-ICT-2016-1-731761 IMAGINE. D. Martínez is also supported by the Spanish Ministry of Education, Culture and Sport via a FPU doctoral grant (FPU12-04173)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Learning depth-aware deep representations for robotic perception

  • Porzi, Lorenzo
  • Rota Buló, Samuel
  • Peñate-Sánchez, Adrián
  • Ricci, Elisa
  • Moreno-Noguer, Francesc
Exploiting RGB-D data by means of Convolutional Neural Networks (CNNs) is at the core of a number of robotics applications, including object detection, scene semantic segmentation and grasping. Most existing approaches, however, exploit RGB-D data by simply considering depth as an additional input channel for the network. In this paper we show that the performance of deep architectures can be boosted by introducing DaConv, a novel, general-purpose CNN block which exploits depth to learn scale-aware feature representations. We demonstrate the benefits of DaConv on a variety of robotics oriented tasks, involving affordance detection, object coordinate regression and contour detection in RGB-D images. In each of these experiments we show the potential of the proposed block and how it can be readily integrated into existing CNN architectures., This work is partly funded by the Spanish MINECO project RobInstruct TIN2014-58178-R, by the ERA-Net Chistera project I-DRESS PCIN-2015-147, by the EU project AEROARMS H2020-ICT-2014-1-644271 and by the EU project SECOND HANDS H2020-ICT-2014-1-643950., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual REPS: A generalization of relative entropy policy search exploiting bad experiences

  • Colomé, Adrià
  • Torras, Carme
Policy search (PS) algorithms are widely used for their simplicity and effectiveness in finding solutions for robotic problems. However, most current PS algorithms derive policies by statistically fitting the data from the best experiments only. This means that experiments yielding a poor performance are usually discarded or given too little influence on the policy update. In this paper, we propose a generalization of the relative entropy policy search (REPS) algorithm that takes bad experiences into consideration when computing a policy. The proposed approach, named dual REPS (DREPS) following the philosophical interpretation of the duality between good and bad, finds clusters of experimental data yielding a poor behavior and adds them to the optimization problem as a repulsive constraint. Thus, considering that there is a duality between good and bad data samples, both are taken into account in the stochastic search for a policy. Additionally, a cluster with the best samples may be included as an attractor to enforce faster convergence to a single optimal solution in multimodal problems. We first tested our proposed approach in a simulated reinforcement learning setting and found that DREPS considerably speeds up the learning process, especially during the early optimization steps and in cases where other approaches get trapped in between several alternative maxima. Further experiments in which a real robot had to learn a task with a multimodal reward function confirm the advantages of our proposed approach with respect to REPS., This work is partially funded by Spanish project RoboInstruct (TIN2014-58178-R) and CSIC project MANIPlus (201350E102). Adria Colome is also supported by the Spanish Ministry of Education, Culture and Sport via a FPU doctoral grant (AP2010-1989)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Random clustering ferns for multimodal object recognition

  • Villamizar, Michael
  • Garrell, Anaís
  • Sanfeliu, Alberto
  • Moreno-Noguer, Francesc
We propose an efficient and robust method for the recognition of objects exhibiting multiple intra-class modes, where each one is associated with a particular object appearance. The proposed method, called random clustering ferns, combines synergically a single and real-time classifier, based on the boosted assembling of extremely randomized trees (ferns), with an unsupervised and probabilistic approach in order to recognize efficiently object instances in images and discover simultaneously the most prominent appearance modes of the object through tree-structured visual words. In particular, we use boosted random ferns and probabilistic latent semantic analysis to obtain a discriminative and multimodal classifier that automatically clusters the response of its randomized trees in function of the visual object appearance. The proposed method is validated extensively in synthetic and real experiments, showing that the method is capable of detecting objects with diverse and complex appearance distributions in real-time performance., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness under projects ERA-Net Chistera project ViSen PCIN-2013-047, RobInstruct TIN2014-58178-R, ROBOT-INT-COOP DPI2013-42458-P, and by the EU project AEROARMS H2020-ICT-2014-1-644271., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modal space: A physics-based model for sequential estimation of time-varying shape from monocular video

  • Agudo Martínez, Antonio
  • Montiel, J. M. M.
  • Agapito, Lourdes
  • Calvo, Begoña
This paper describes two sequential methods for recovering the camera pose together with the 3D shape of highly deformable surfaces from a monocular video. The nonrigid 3D shape is modeled as a linear combination of mode shapes with time-varying weights that define the shape at each frame and are estimated on-the-fly. The low-rank constraint is combined with standard smoothness priors to optimize the model parameters over a sliding window of image frames. We propose to obtain a physics-based shape basis using the initial frames on the video to code the time-varying shape along the sequence, reducing the problem from trilinear to bilinear. To this end, the 3D shape is discretized by means of a soup of elastic triangular finite elements where we apply a force balance equation. This equation is solved using modal analysis via a simple eigenvalue problem to obtain a shape basis that encodes the modes of deformation. Even though this strategy can be applied in a wide variety of scenarios, when the observations are denser, the solution can become prohibitive in terms of computational load. We avoid this limitation by proposing two efficient coarse-to-fine approaches that allow us to easily deal with dense 3D surfaces. This results in a scalable solution that estimates a small number of parameters per frame and could potentially run in real time. We show results on both synthetic and real videos with ground truth 3D data, while robustly dealing with artifacts such as noise and missing data., This work was partly supported by the MINECO projects RT-SLAM DPI2015-67275-P, RobInstruct TIN2014-58178-R and Keratocono DPI2014-54981-R; by the SecondHands project funded by the EU Horizon 2020 Research and Innovation programme under grant agreement No 643950; by the ERA-net CHISTERA projects VISEN PCIN-2013-047 and I-DRESS PCIN-2015-147; and by a scholarship FPU12/04886 from the Spanish MECD., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active garment recognition and target grasping point detection using deep learning

  • Corona Puyane, Enric
  • Alenyà, Guillem
  • Gabás Nova, Antoni
  • Torras, Carme
Identification and bi-manual handling of deformable objects, like textiles, is one of the most challenging tasks in the field of industrial and service robotics. Their unpredictable shape and pose makes it very difficult to identify the type of garment and locate the most relevant parts that can be used for grasping. In this paper, we propose an algorithm that first, identifies the type of garment and second, performs a search of the two grasping points that allow a robot to bring the garment to a known pose. We show that using an active search strategy it is possible to grasp a garment directly from predefined grasping points, as opposed to the usual approach based on multiple re-graspings of the lowest hanging parts. Our approach uses a hierarchy of three Convolutional Neural Networks (CNNs) with different levels of specialization, trained both with synthetic and real images. The results obtained in the three steps (recognition, first grasping point, second grasping point) are promising. Experiments with real robots show that most of the errors are due to unsuccessful grasps and not to the localization of the grasping points, thus a more robust grasping strategy is required., This work was partially supported by the EU CHIST-ERA I-DRESS project PCIN-2015-147, by the Spanish Ministry of Economy and Competitiveness under project Robinstruct TIN2014-58178-R, and by the CSIC project TextilRob 201550E028., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robot motion adaptation through user intervention and reinforcement learning

  • Jevtić, Aleksandar
  • Colomé, Adrià
  • Alenyà, Guillem
  • Torras, Carme
Assistant robots are designed to perform specific tasks for the user, but their performance is rarely optimal, hence they are required to adapt to user preferences or new task requirements. In the previous work, the potential of an interactive learning framework based on user intervention and reinforcement learning (RL) was assessed. The framework allowed the user to correct an unfitted segment of the robot trajectory by using hand movements to guide the robot along a corrective path. So far, only the usability of the framework was evaluated through experiments with users. In the current work, the framework is described in detail and its ability to learn from a set of sample trajectories using an RL algorithm is analyzed. To evaluate the learning performance, three versions of the framework are proposed that differ in the method used to obtain the sample trajectories, which are: human-guided learning, autonomous learning, and combined human-guided with autonomous learning. The results show that the combination of the human-guided and autonomous learning achieved the best performance, and although it needed a higher number of sample trajectories than the human-guided learning, it required less user involvement. Autonomous learning alone obtained the lowest reward value and needed the highest number of sample trajectories., This work was performed as a part of the I-DRESS project (EU CHIST-ERA 2014) and funded by the programme “Acciones de Programación Conjunta Internacional 2015” of the Spanish Ministry of Economy, Industry and Competitiveness (ref. num. PCIN-2015-147), and partially supported by the Spanish national project RobInstruct (ref. num. TIN2014-58178-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A scalable, efficient, and accurate solution to non-rigid structure from motion

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
Most Non-Rigid Structure from Motion (NRSfM) solutions are based on factorization approaches that allow reconstructing objects parameterized by a sparse set of 3D points. These solutions, however, are low resolution and generally, they do not scale well to more than a few tens of points. While there have been recent attempts at bringing NRSfM to a dense domain, using for instance variational formulations, these are computationally demanding alternatives which require certain spatial continuity of the data, preventing their use for articulated shapes with large deformations or situations with multiple discontinuous objects. In this paper, we propose incorporating existing point trajectory low-rank models into a probabilistic framework for matrix normal distributions. With this formalism, we can then simultaneously learn shape and pose parameters using expectation maximization, and easily exploit additional priors such as known point correlations. While similar frameworks have been used before to model distributions over shapes, here we show that formulating the problem in terms of distributions over trajectories brings remarkable improvements, especially in generality and efficiency. We evaluate the proposed approach in a variety of scenarios including one or multiple objects, sparse or dense reconstructions, missing observations, mild or sharp deformations, and in all cases, with minimal prior knowledge and low computational cost., This work has been partially supported by the Spanish Ministry of Science and Innovation under projects RobInstruct TIN2014-58178-R and HuMoUR TIN2017-90086-R, and by a Google Faculty Award., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosted Random Ferns for object detection

  • Villamizar, Michael
  • Andrade-Cetto, Juan
  • Sanfeliu, Alberto
  • Moreno-Noguer, Francesc
In this paper we introduce the Boosted Random Ferns (BRFs) to rapidly build discriminative classifiers for learning and detecting object categories. At the core of our approach we use standard random ferns, but we introduce four main innovations that let us bring ferns from an instance to a category level, and still retain efficiency. First, we define binary features on the histogram of oriented gradients-domain (as opposed to intensity-), allowing for a better representation of intra-class variability. Second, both the positions where ferns are evaluated within the sliding window, and the location of the binary features for each fern are not chosen completely at random, but instead we use a boosting strategy to pick the most discriminative combination of them. This is further enhanced by our third contribution, that is to adapt the boosting strategy to enable sharing of binary features among different ferns, yielding high recognition rates at a low computational cost. And finally, we show that training can be performed online, for sequentially arriving images. Overall, the resulting classifier can be very efficiently trained, densely evaluated for all image locations in about 0.1 seconds, and provides detection rates similar to competing approaches that require expensive and significantly slower processing times. We demonstrate the effectiveness of our approach by thorough experimentation in publicly available datasets in which we compare against state-of-the-art, and for tasks of both 2D detection and 3D multi-view estimation., This work was partially supported by the Catalan Agency for Management of University and Research Grants for the Consolidated Group VIS (2014 SGR 897). A.S. acknowledges support also from project ColRobTransp (DPI2016-78957-R), and J.A. and F.M. from project RobInstruct (TIN2014-58178-R), both funded by the Spanish Ministry of Economy, Industry and Competitiveness. J.A., A.S., and F.M. were also partially supported by the European Union projects AEROARMS (H2020-ICT-2014-1-644271) and LOGIMATIC (H2020-Galileo-2015-1-687534)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

BreakingNews: Article annotation by image and text processing

  • Ramisa, Arnau
  • Yan, Fei
  • Moreno-Noguer, Francesc
  • Mikolajczyk, Krystian
Building upon recent Deep Neural Network architectures, current approaches lying in the intersection of Computer Vision and Natural Language Processing have achieved unprecedented breakthroughs in tasks like automatic captioning or image retrieval. Most of these learning methods, though, rely on large training sets of images associated with human annotations that specifically describe the visual content. In this paper we propose to go a step further and explore the more complex cases where textual descriptions are loosely related to the images. We focus on the particular domain of news articles in which the textual content often expresses connotative and ambiguous relations that are only suggested but not directly inferred from images. We introduce an adaptive CNN architecture that shares most of the structure for multiple tasks including source detection, article illustration and geolocation of articles. Deep Canonical Correlation Analysis is deployed for article illustration, and a new loss function based on Great Circle Distance is proposed for geolocation. Furthermore, we present BreakingNews, a novel dataset with approximately 100K news articles including images, text and captions, and enriched with heterogeneous meta-data (such as GPS coordinates and user comments). We show this dataset to be appropriate to explore all aforementioned problems, for which we provide a baseline performance using various Deep Learning architectures, and different representations of the textual and visual features. We report very promising results and bring to light several limitations of current state-of-the-art in this kind of domain, which we hope will help spur progress in the field., This work has been partially funded by Spanish Ministry of Economy and Competitiveness under project RobInstruct TIN2014-58178-R, by the ERA-net CHISTERA projects VISEN PCIN2013-047 and I-DRESS PCIN-2015-147., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Autonomous navigation of micro aerial vehicles using high-rate and low-cost sensors

  • Santamaria-Navarro, Àngel
  • Loianno, Giuseppe
  • Solà, Joan
  • Kumar, Vijay
  • Andrade-Cetto, Juan
The combination of visual and inertial sensors for state estimation has recently found wide echo in the robotics community, especially in the aerial robotics field, due to the lightweight and complementary characteristics of the sensors data. However, most state estimation systems based on visual-inertial sensing suffer from severe processor requirements, which in many cases make them impractical. In this paper, we propose a simple, low-cost and high rate method for state estimation enabling autonomous flight of micro aerial vehicles, which presents a low computational burden. The proposed state estimator fuses observations from an inertial measurement unit, an optical flow smart camera and a time-of-flight range sensor. The smart camera provides optical flow measurements up to a rate of 200 Hz, avoiding the computational bottleneck to the main processor produced by all image processing requirements. To the best of our knowledge, this is the first example of extending the use of these smart cameras from hovering-like motions to odometry estimation, producing estimates that are usable during flight times of several minutes. In order to validate and defend the simplest algorithmic solution, we investigate the performances of two Kalman filters, in the extended and error-state flavors, alongside with a large number of algorithm modifications defended in earlier literature on visual-inertial odometry, showing that their impact on filter performance is minimal. To close the control loop, a non-linear controller operating in the special Euclidean group SE(3) is able to drive, based on the estimated vehicle’s state, a quadrotor platform in 3D space guaranteeing the asymptotic stability of 3D position and heading. All the estimation and control tasks are solved on board and in real time on a limited computational unit. The proposed approach is validated through simulations and experimental results, which include comparisons with ground-truth data provided by a motion capture system. For the benefit of the community, we make the source code public., This work was funded by the project ROBINSTRUCT (TIN2014-58178-R) and the Ramón y Cajal posdoctoral fellowship (RYC-2012-11604) from the Spanish Ministry of Economy and Competitiveness, by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the EU H2020 project AEROARMS (H2020-ICT-2014-1-644271)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Force-based representation for non-rigid Shape and elastic model estimation

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
This paper addresses the problem of simultaneously recovering 3D shape, pose and the elastic model of a deformable object from only 2D point tracks in a monocular video. This is a severely under-constrained problem that has been typically addressed by enforcing the shape or the point trajectories to lie on low-rank dimensional spaces. We show that formulating the problem in terms of a low-rank force space that induces the deformation and introducing the elastic model as an additional unknown, allows for a better physical interpretation of the resulting priors and a more accurate representation of the actual object's behavior. In order to simultaneously estimate force, pose, and the elastic model of the object we use an expectation maximization strategy, where each of these parameters are successively learned by partial M-steps. Once the elastic model is learned, it can be transfered to similar objects to code its 3D deformation. Moreover, our approach can robustly deal with missing data, and encode both rigid and non-rigid points under the same formalism. We thoroughly validate the approach on Mocap and real sequences, showing more accurate 3D reconstructions than state-of-the-art, and additionally providing an estimate of the full elastic model with no a priori information., This work has been partially supported by the Spanish Ministry of Science and Innovation under project RobInstruct TIN2014-58178-R; and by a Google Faculty Award. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM-2016-0656., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Breakingnews: article annotation by image and text processing

  • Ramisa Ayats, Arnau
  • Yan, Fei
  • Moreno-Noguer, Francesc
  • Mikolajczyk, Krystian
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Building upon recent Deep Neural Network architectures, current approaches lying in the intersection of Computer Vision and Natural Language Processing have achieved unprecedented breakthroughs in tasks like automatic captioning or image retrieval. Most of these learning methods, though, rely on large training sets of images associated with human annotations that specifically describe the visual content. In this paper we propose to go a step further and explore the more complex cases where textual descriptions are loosely related to the images. We focus on the particular domain of news articles in which the textual content often expresses connotative and ambiguous relations that are only suggested but not directly inferred from images. We introduce an adaptive CNN architecture that shares most of the structure for multiple tasks including source detection, article illustration and geolocation of articles. Deep Canonical Correlation Analysis is deployed for article illustration, and a new loss function based on Great Circle Distance is proposed for geolocation. Furthermore, we present BreakingNews, a novel dataset with approximately 100K news articles including images, text and captions, and enriched with heterogeneous meta-data (such as GPS coordinates and user comments). We show this dataset to be appropriate to explore all aforementioned problems, for which we provide a baseline performance using various Deep Learning architectures, and different representations of the textual and visual features. We report very promising results and bring to light several limitations of current state-of-the-art in this kind of domain, which we hope will help spur progress in the field., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

MSClique: Multiple structure discovery through the maximum weighted clique problem

  • Sanromà Güell, Gerard
  • Peñate Sánchez, Adrián
  • Alquézar Mancho, René|||0000-0002-6420-0517
  • Serratosa Casanelles, Francesc|||0000-0001-6112-5913
  • Moreno-Noguer, Francesc
  • Andrade-Cetto, Juan|||0000-0002-6354-8941
  • González Ballester, Miguel Ángel
We present a novel approach for feature correspondence and multiple structure discovery in computer vision. In contrast to existing methods, we exploit the fact that point-sets on the same structure usually lie close to each other, thus forming clusters in the image. Given a pair of input images, we initially extract points of interest and extract hierarchical representations by agglomerative clustering. We use the maximum weighted clique problem to find the set of corresponding clusters with maximum number of inliers representing the multiple structures at the correct scales. Our method is parameter-free and only needs two sets of points along with their tentative correspondences, thus being extremely easy to use. We demonstrate the effectiveness of our method in multiple-structure fitting experiments in both publicly available and in-house datasets. As shown in the experiments, our approach finds a higher number of structures containing fewer outliers compared to state-of-the-art methods., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Breakingnews: article annotation by image and text processing

  • Ramisa Ayats, Arnau
  • Yan, Fei
  • Moreno-Noguer, Francesc
  • Mikolajczyk, Krystian
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Building upon recent Deep Neural Network architectures, current approaches lying in the intersection of Computer Vision and Natural Language Processing have achieved unprecedented breakthroughs in tasks like automatic captioning or image retrieval. Most of these learning methods, though, rely on large training sets of images associated with human annotations that specifically describe the visual content. In this paper we propose to go a step further and explore the more complex cases where textual descriptions are loosely related to the images. We focus on the particular domain of news articles in which the textual content often expresses connotative and ambiguous relations that are only suggested but not directly inferred from images. We introduce an adaptive CNN architecture that shares most of the structure for multiple tasks including source detection, article illustration and geolocation of articles. Deep Canonical Correlation Analysis is deployed for article illustration, and a new loss function based on Great Circle Distance is proposed for geolocation. Furthermore, we present BreakingNews, a novel dataset with approximately 100K news articles including images, text and captions, and enriched with heterogeneous meta-data (such as GPS coordinates and user comments). We show this dataset to be appropriate to explore all aforementioned problems, for which we provide a baseline performance using various Deep Learning architectures, and different representations of the textual and visual features. We report very promising results and bring to light several limitations of current state-of-the-art in this kind of domain, which we hope will help spur progress in the field., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

MSClique: Multiple structure discovery through the maximum weighted clique problem

  • Sanromà Güell, Gerard
  • Peñate Sánchez, Adrián
  • Alquézar Mancho, René
  • Serratosa Casanelles, Francesc
  • Moreno-Noguer, Francesc
  • Andrade-Cetto, Juan
  • González Ballester, Miguel Ángel
We present a novel approach for feature correspondence and multiple structure discovery in computer vision. In contrast to existing methods, we exploit the fact that point-sets on the same structure usually lie close to each other, thus forming clusters in the image. Given a pair of input images, we initially extract points of interest and extract hierarchical representations by agglomerative clustering. We use the maximum weighted clique problem to find the set of corresponding clusters with maximum number of inliers representing the multiple structures at the correct scales. Our method is parameter-free and only needs two sets of points along with their tentative correspondences, thus being extremely easy to use. We demonstrate the effectiveness of our method in multiple-structure fitting experiments in both publicly available and in-house datasets. As shown in the experiments, our approach finds a higher number of structures containing fewer outliers compared to state-of-the-art methods., Peer Reviewed, Postprint (published version)