Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear imaging microscopy for assessing structural and photochemical modifications upon laser removal of dammar varnish on photosensitive substrates

  • Oujja, Mohamed
  • Psilodimitrakopoulos, Sotiris
  • Carrasco, Esther
  • Sanz, Mikel
  • Philippidis, A.
  • Selimis, A.
  • Pouli, P.
  • Filippidis, G.
  • Castillejo, Marta
The nonlinear optical microscopy (NLM) modalities of Multi-Photon Excited Fluorescence (MPEF) and Third Harmonic Generation (THG) have been combined in this work to characterize as a function of depth with micrometric resolution the type and extent of morphological and photochemical modifications that take place upon ultraviolet (UV) pulsed laser removal of a dammar varnish layer applied on a photosensitive substrate. The latter consists on a layer of the synthetic polymer polymethyl methacrylate doped with a photosensitizer, the aromatic compound 1,4-di[2-(5-phenyloxazolyl)] benzene, that strongly fluoresces upon UV light illumination. A number of laser conditions for partial or total elimination of the varnish coating were explored, namely different wavelengths (266, 248 and 213 nm) and pulse durations, in the nanosecond, picosecond and femtosecond ranges. Changes in the MPEF signals upon laser ablation of the outermost varnish layer successfully signpost photochemical modifications of the varnish or of the photosensitive under-layer, and their dependence with the laser ablation parameters, i.e., wavelength and pulse duration. In turn, THG signals mark the presence of layer boundaries and the reduction by laser ablation of the thickness of the varnish coating. The obtained MPEF and THG data are complemented by morphological observation by optical microscopy and measurements of laser induced fluorescence and micro-Raman spectra of the samples before and after laser ablation at the selected laser irradiation conditions. The results acquired through these nondestructive NLM imaging techniques serve to understand the phenomena that are induced upon laser ablation and to determine the best operating conditions that ensure controlled removal of the varnish with minimal morphological and chemical modifications to the under-layers. This research is of direct application to the UV pulsed laser cleaning of paintings and demonstrates the potential of NLM as a novel assessment tool for non-destructive, on line monitoring of the laser cleaning process., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of biological colonization on ceramic roofing tiles by lichens and a combined laser and biocide procedure for its removal

  • Peña Poza, Javier
  • Ascaso, Carmen
  • Sanz, Mikel
  • Pérez-Ortega, Sergio
  • Oujja, Mohamed
  • Wierzchos, Jacek
  • Souza-Egipsy, Virginia
  • Cañamares, María Vega
  • Urizal, M.
  • Castillejo, Marta
  • García Heras, Manuel
Biodeterioration damage is an important issue in conservation and restoration of built heritage, especially when ceramic materials are used. Biological colonization of ceramic roofing tiles by lichens is a common phenomenon. However, there are no reports to date of lichens removal from unglazed roofing tiles for conservation purposes. This paper for the first time reveals the results of a combined procedure undertaken to assess the removal of lichens on different kinds of unglazed ceramic roofing tiles by treatments based on both dual sequential laser irradiation and treatment using Acticide CF biocide. Three species of lichens were identified: Verrucaria nigrescens, Calogaya decipiens and Pyrenodesmia teicholyta. The chemical and mineralogical composition of roofing tiles were characterized by X-ray fluorescence (XRF) spectrometry, optical polarized petrographic microscopy, and X-ray diffraction (XRD). Laser irradiation was accomplished by applying sequences of nanosecond laser pulses at two wavelengths (1064 and 266 nm). After dual sequential laser irradiation a biocide was applied. To assess the combined effect of both treatments several techniques were used, including stereo and fluorescence (FM) microscopies, scanning (SEM) and transmission (TEM) electron microscopies, and FT-Raman spectroscopy. Chemical composition of the analyzed roofing tiles was shown as a relevant factor regarding the degree of interaction between the biological colonization and the substrate, and hence, the bioweathering effect. The combined procedure has proved to be very effective in ablating cortical layers in all species, or even complete areolae in V. nigrescens, enhancing biocide effect in the thalli of C. decipiens and P. teicholyta, and producing the complete damage of both bionts., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

X-ray and ion irradiation effects on azurite, malachite and alizarin pictorial models

  • Carrasco, Esther
  • Oujja, Mohamed
  • Sanz, Mikel
  • Marco, J.F.
  • Castillejo, Marta
The analysis by intense radiation sources of painting materials used in artworks gives valuable information about their composition and state of conservation, but it can also induce undesired modifications on the studied substrates. Here we use X-ray photoelectron spectroscopy (XPS) to follow the surface chemical changes that prolonged irradiation with soft X-rays (with maximum doses ranging from ~ 1.2x1017 to ~ 3.4x1017 photons cm-2) produce on azurite, malachite and alizarin pigments and on two egg-yolk temperas containing azurite or alizarin. The effects following exposure to Argon ion irradiation have been also studied for malachite and azurite tempera. XPS spectra of the samples show that both types of radiation induce similar superficial alterations, although, at the selected experimental conditions, the modification rate is slower for exposure to soft X-rays. The highest radiation stability is shown for alizarin and, on the contrary, azurite and malachite experience a progressive chemical reduction of Cu2+ to Cu+. The reduction of copper takes also place in the azurite tempera, while the proteins and lipids of the egg-yolk binder of azurite and alizarin temperas are subjected to degradation by irradiation with photons and ions. By employing XPS, the cleavage of C-N, C-O(H) and C=O bonds has been identified in the egg-yolk temperas., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multianalytical non-invasive characterization of phthalocyanine acrylic paints through spectroscopic and non-linear optical techniques

  • Fovo, A.D.
  • Oujja, Mohamed
  • Sanz, Mikel
  • Martínez-Hernández, A.
  • Cañamares, María Vega
  • Castillejo, Marta
  • Fontana, R.
The documentation and monitoring of cleaning operations on paintings benefit from the identification and determination of thickness of the materials to be selectively removed. Since in artworks diagnosis the preservation of the object's integrity is a priority, the application of non-invasive techniques is commonly preferred. In this work, we present the results obtained with a set of non-invasive optical techniques for the chemical and physical characterization of six copper-phthalocyanine (Cu-Pc) acrylic paints. Cu-Pc pigments have been extensively used by artists over the past century, thanks to their properties and low cost of manufacture. They can also be found in historical paintings in the form of overpaints/retouchings, providing evidence of recent conservation treatments. The optical behaviour and the chemical composition of Cu-Pc paints were investigated through a multi-analytical approach involving micro-Raman spectroscopy, Fibre Optics Reflectance Spectroscopy (FORS) and Laser Induced Fluorescence (LIF), enabling the differentiation among pigments and highlighting discrepancies with the composition declared by the manufacturer. The applicability of Non Linear Optical Microscopy (NLOM) for the evaluation of paint layer thickness was assessed using the modality of Multi-photon Excitation Fluorescence (MPEF). Thickness values measured with MPEF were compared with those retrieved through Optical Coherence Tomography (OCT), showing significant consistency and paving the way for further non-linear stratigraphic investigations on painting materials., Peer Reviewed