Pasar al contenido principal

DESARROLLO DE UN MORTERO DE REVESTIMIENTO INTELIGENTE BASADO EN CEMENTOS ECOEFICIENTES TERMOCROMICOS

BIA2014-56827-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design, optimization and construction of a prototype for a thermochromic Trombe wall

  • Martín-Consuegra, Fernando
  • Alonso, Carmen
  • Pérez Álvarez-Quiñones, Gloria
  • Frutos Vázquez, Borja
  • Oteiza San José, Ignacio
In Press., Most of the existing buildings in Spain lack any thermal insulation in their envelope. They are in urgent need to be refurbished to reduce their energy consumption. The standard solution for the rehabilitation of facades is to incorporate thermal insulation materials to reduce heat transmission. This work proposes an extension of the conventional approach: the installation of Trombe walls on sunny facades incorporating an outer layer of thermochromic mortar, the thermochromic Trombe wall (TTW). This improves the energy performance of the existing buildings by enhancing their solar gains. This paper describes the design and configuration of the new TTW system. While traditional solutions can be evaluated with a simple heat transfer equation, a complex energy model is needed to evaluate TTW. Energy simulation is used to determine parameters that influence thermal performance. Thermochromic mortar transition temperature is designed to achieve maximum efficiency. The results obtained from the parametric study were used to determine the aspects of the construction of the first prototype on a laboratory test cell. The information obtained from the experiment will be used for the calibration of the energy model that will establish the potential for the incorporation of the TTW to the existing buildings., This work is part of the tasks developed for the project BIA2014-56827-R ‘Development of an intelligent coating mortar based on thermochromic ecoefficient cements (MICET)’ funded by Ministerio de Economía y Competitividad (Spanish Ministry of Economy, Industry and Competitiveness). The construction system analysis was produced under funding of the Spanish Ministry of Economy and Competitiveness project BIA 2017-83231-C2-1-R: ‘HABITA-RES: Nueva herramienta integrada de evaluación para áreas urbanas vulnerables. Hacia la autosuficiencia energética y a favor de un modelo de habitabilidad biosaludable’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selection of suitable materials for the development of an innovative thermochromic Trombe wall

  • Pérez Álvarez-Quiñones, Gloria
  • Rodríguez Allegro, Virginia
  • Alonso, Carmen
  • Martín-Consuegra, Fernando
  • Oteiza San José, Ignacio
  • Frutos Vázquez, Borja
  • Guerrero Bustos, Ana María
In Press., An innovative system based on the Trombe Wall concept is under development to improve energy efficiency in buildings in different climatic conditions. The system takes advantage of the variable optical properties of a thermochromic mortar coating on the façade to optimize thermal behaviour. The mortar is based on the addition of organic thermochromic pigments to the cementitious matrix and is characterized by a high solar reflectance for temperatures higher than a nominal colour change value (Tc) and a low solar reflectance for lower temperatures. Materials potentially useful for this innovative system were analysed in this work. As prepared thermochromic mortar specimens, mortar specimens coated with different UV protecting products and mortar specimens covered by filter glasses with different optical responses were exposed to controlled outdoor environmental conditions during several days. Surface and environmental temperatures were monitored during the experiment. Moreover, reflectance spectra of the samples were recorded every day early in the morning, when the environmental temperature is significantly lower than Tc, and in the afternoon, when it is significantly higher than this value. Most suitable materials for the intended application were defined from an analysis of the optical and thermal properties of these specimens and their durability., This work was supported by Ministry of Economy Industry and Competitiveness of Spain under the project BIA2014-56827-R ‘Development of an intelligent coating mortar based on thermochromic eco-efficient cements (MICET)’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental analysis of a prototype for a thermochromic Trombe wall

  • Martínez, Arturo
  • Alonso, Carmen
  • Martín-Consuegra, Fernando
  • Pérez Álvarez-Quiñones, Gloria
  • Frutos Vázquez, Borja
  • Gutiérrez, Álvaro
Ambitious and innovative refurbishment measures will be required to meet the European Union’s goals for limiting building energy consumption. Envelope efficiency can be enhanced, for instance, with new materials and improved passive techniques. Trombe walls (TWs), one such technique, reduce heating demand in winter, although they cause overheating in warm climates. That drawback may be corrected with thermal-optically reversible materials. In this study, a thermochromic mortar was applied to a prototype TW to reduce solar absorption in summer without affecting its wintertime efficacy. Further to field measurements, the maximum surface temperature reached on the wall’s thermochromic cladding (TCC) was 32°C in winter and 44.7°C in summer. The indoor cold weather temperature in the module ranged from 7.9°C to 16.5°C for a mean of 11°C, compared to 25.1°C to 32.2°C with a mean of 28.9°C in warm weather. Ventilating the air gap at 60–200 ach prevented the cladding from fading to nearly colourless in winter. In light of the improved thermal transfer performance delivered, the TTW proposed can profitably be used for energy refurbishment in existing buildings., This research was supported by the grants from Ministry of Economy and Competitiveness of Spain [Project BIA2014-56827R], and from the CSIC in the i-Link + 2019 call under the project LINKA20220 Project ‘Nanotechnology-based thermochromic materials for adaptive building envelopes’ (2020–2021). Funding was also received from Mexico’s National Council of Science and Technology (CONACYT) and the Foundation of the National Institute of Fine Arts (FINBA). This research was supported by the grants from Ministry of Economy and Competitiveness of Spain, under the Project BIA2014-56827R, and from the CSIC in the i-Link + 2019 call under the project LINKA20220 Project ‘Nanotechnology - based thermochromic materials for adaptive building envelopes’ (2020-2021). Funding was also received from Mexico’s National Council of Science and Technology (CONACYT) and the foundation of the National Institute of Fine Arts (FINBA). The support provided by the Spanish Meteorological State Agency (AEMET) in the form of data is gratefully acknowledged., Peer reviewed