Pasar al contenido principal

DESARROLLO DE UN MORTERO DE REVESTIMIENTO INTELIGENTE BASADO EN CEMENTOS ECOEFICIENTES TERMOCROMICOS

BIA2014-56827-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

First approach to thermochromic mortars: compatibility between thermochromic pigments and cement

  • Pérez Álvarez-Quiñones, Gloria
  • Guerrero Bustos, Ana María
  • Alonso, M. Cruz
  • Pons Aglio, Alicia
2nd ICCS 16, Madrid 13-15 junio (2016) ; http://www.iccs16.org/frontal/default.asp, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Caracterización del color y la reflectancia solar de un cemento eco-eficiente para revestimiento de fachadas

  • Pérez Álvarez-Quiñones, Gloria
  • Mota-Heredia, Carlos
  • Pons Aglio, Alicia
  • Guerrero Bustos, Ana María
4 pags., 3 figs., 1 tab. ; Color 2016, Campus de As Lagoas, Ourense, 19-22 Julio, 2016, Este trabajo se centra en el estudio de las propiedades ópticas de un cemento eco-eficiente sintetizado en el laboratorio con un proceso de menor temperatura que el cemento Portland convencional y sin emisión de CO2 y que además recicla una ceniza volante residual de una central térmica. Se compara su reflectancia y su color con el de dos cementos convencionales (cemento Portland gris convencional y un cemento Portland blanco) para evaluar su posible aplicación como material de base en el desarrollo de materiales base-cemento fríos de revestimiento de fachadas., Los autores agradecen al Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad el apoyo para la realización de este trabajo mediante la subvención de referencia BIA2014-56827-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design, optimization and construction of a prototype for a thermochromic Trombe wall

  • Martín-Consuegra, Fernando
  • Alonso, Carmen
  • Pérez Álvarez-Quiñones, Gloria
  • Frutos Vázquez, Borja
  • Oteiza San José, Ignacio
In Press., Most of the existing buildings in Spain lack any thermal insulation in their envelope. They are in urgent need to be refurbished to reduce their energy consumption. The standard solution for the rehabilitation of facades is to incorporate thermal insulation materials to reduce heat transmission. This work proposes an extension of the conventional approach: the installation of Trombe walls on sunny facades incorporating an outer layer of thermochromic mortar, the thermochromic Trombe wall (TTW). This improves the energy performance of the existing buildings by enhancing their solar gains. This paper describes the design and configuration of the new TTW system. While traditional solutions can be evaluated with a simple heat transfer equation, a complex energy model is needed to evaluate TTW. Energy simulation is used to determine parameters that influence thermal performance. Thermochromic mortar transition temperature is designed to achieve maximum efficiency. The results obtained from the parametric study were used to determine the aspects of the construction of the first prototype on a laboratory test cell. The information obtained from the experiment will be used for the calibration of the energy model that will establish the potential for the incorporation of the TTW to the existing buildings., This work is part of the tasks developed for the project BIA2014-56827-R ‘Development of an intelligent coating mortar based on thermochromic ecoefficient cements (MICET)’ funded by Ministerio de Economía y Competitividad (Spanish Ministry of Economy, Industry and Competitiveness). The construction system analysis was produced under funding of the Spanish Ministry of Economy and Competitiveness project BIA 2017-83231-C2-1-R: ‘HABITA-RES: Nueva herramienta integrada de evaluación para áreas urbanas vulnerables. Hacia la autosuficiencia energética y a favor de un modelo de habitabilidad biosaludable’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selection of suitable materials for the development of an innovative thermochromic Trombe wall

  • Pérez Álvarez-Quiñones, Gloria
  • Rodríguez Allegro, Virginia
  • Alonso, Carmen
  • Martín-Consuegra, Fernando
  • Oteiza San José, Ignacio
  • Frutos Vázquez, Borja
  • Guerrero Bustos, Ana María
In Press., An innovative system based on the Trombe Wall concept is under development to improve energy efficiency in buildings in different climatic conditions. The system takes advantage of the variable optical properties of a thermochromic mortar coating on the façade to optimize thermal behaviour. The mortar is based on the addition of organic thermochromic pigments to the cementitious matrix and is characterized by a high solar reflectance for temperatures higher than a nominal colour change value (Tc) and a low solar reflectance for lower temperatures. Materials potentially useful for this innovative system were analysed in this work. As prepared thermochromic mortar specimens, mortar specimens coated with different UV protecting products and mortar specimens covered by filter glasses with different optical responses were exposed to controlled outdoor environmental conditions during several days. Surface and environmental temperatures were monitored during the experiment. Moreover, reflectance spectra of the samples were recorded every day early in the morning, when the environmental temperature is significantly lower than Tc, and in the afternoon, when it is significantly higher than this value. Most suitable materials for the intended application were defined from an analysis of the optical and thermal properties of these specimens and their durability., This work was supported by Ministry of Economy Industry and Competitiveness of Spain under the project BIA2014-56827-R ‘Development of an intelligent coating mortar based on thermochromic eco-efficient cements (MICET)’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Smart reversible thermochromic mortar for improvement of energy efficiency in buildings

  • Pérez Álvarez-Quiñones, Gloria
  • Allegro, Virginia R.
  • Corroto, M.
  • Pons Aglio, Alicia
  • Guerrero Bustos, Ana María
A smart reversible thermochromic mortar based on ordinary white Portland cement and organic microencapsulated thermochromic pigments is presented in this work. Chemical and morphological composition of the mortar assures chemical stability and proper physical and organic activity of the pigments within the cementitious matrix. The optical properties of the mortar change with temperature at the transition value of the pigments (31 °C). For higher temperatures, the material shows a light colour and high reflectance in the visible range, while for lower temperatures it shows a dark grey colour associated to a low reflectance. Infrared spectroscopy and electron scanning microscopy results confirm the chemical and morphological stability of the microencapsulated pigments within mortar samples cured for 28 days. Finally, physic-mechanical properties of fresh and hardened mortar demonstrate the suitability of this innovative material as a dynamic building coating for improvement of energy efficiency., This work was supported by the Spanish Ministry of Economy and Competitiveness under the Project BIA2014-56827R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compatibility between thermochromic pigments and Portland cement-based materials

  • Pérez Álvarez-Quiñones, Gloria
  • Mota-Heredia, Carlos
  • Sánchez-García, J. A.
  • Guerrero Bustos, Ana María
Encapsulated reversible thermochromic (ERTC) pigments with optical properties that change reversibly with temperature have been used in building coatings to improve energy efficiency and reduce environmental impact of buildings. This work presents a detailed characterization of commercial ERTC pigments useful for this application and an analysis of their compatibility with the aggressive cementitious matrix. Chemical reactions involving the pigment are identified through the analysis of the solid phase and pore solution of a white Portland cement paste and a mortar with calcareous aggregate during the first 3 h of hydration. The results indicate that a low concentration of potassium ions in the aqueous phase is necessary with respect to the concentration of pigment microcapsules to achieve a proper stability of the thermochromic response. This condition is fulfilled in the case of mortar formulations used for building coatings, thus ensuring the viability of developing a chemically stable thermochromic mortar coating., This work was supported by theMinistry of Economy and Competitiveness of Spain, under the Project BIA2014-56827R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermochromic mortar façade coating: impact on the building energy performance, Revestimiento de mortero termocrómico en fachada: impacto en la eficiencia energética del edificio

  • Gavira Galocha, María Jesús
  • Pérez Álvarez-Quiñones, Gloria
  • Acha-Román, Consolación
  • Guerrero Bustos, Ana María
[EN]: Thermochromic materials, with optical properties changing with temperature, optimize the use of solar energy by the building envelope for the improvement of energy efficiency. The purpose of this research is to determine the impact of a thermochromic mortar (TM) façade coating on the building energy performance in a Mediterranean climate. A new calculation methodology is proposed to implement the dynamical optical properties of the mortar in conventional energetic simulation tools. This study considers a coating with variable optical properties that move from 0,65 to 0,60 solar absorptance value, and a transition temperature moving from 20ºC to 35ºC. The mortar shows a dark grey colour for low temperatures and a light colour for high temperatures. The building with TM coating shows a 3 % lower yearly energy demand than the building with non-variable optical properties, with a maximum heating demand reduction reaching 8 %., [ES]: Los materiales termocrómicos, con propiedades ópticas variables con la temperatura, optimizan el aprovechamiento de la energía solar por la envolvente del edificio para mejorar su eficiencia energética. El objeto de este estudio es determinar el impacto de un revestimiento de mortero termocrómico (MT) en fachada sobre la eficiencia energética del edificio en un clima mediterráneo. Se propone una metodología de cálculo para implementar las propiedades ópticas variables del mortero en la simulación energética. Se estudia un revestimiento de MT con absortancia solar entre 0,65 y 0,60, y una temperatura de transición entre 20ºC y 35ºC. El mortero muestra color gris oscuro para temperaturas bajas y color claro para temperaturas altas. El edificio presenta una demanda energética anual un 3 % inferior que con revestimiento de propiedades ópticas no variables. La reducción de demanda de calefacción puede llegar a un 8%., This work is part of the tasks developed for the project BIA2014-56827-R “Development of an intelligent coating mortar based on thermochromic ecoefficient cements (MICET)” funded by Spanish Ministry of Economy, Industry and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved methodology for the characterization of thermochromic coatings for adaptive façades

  • Pérez Álvarez-Quiñones, Gloria
  • Sirvent, Paloma
  • Sánchez-García, J. A.
  • Guerrero Bustos, Ana María
Recent simulation studies conclude that the use of thermochromic (TC) materials at facade coatings has strong potential to reduce the energy demand of the building and the urban heat island effect. However, an improved methodology for the characterization of TC materials is necessary to obtain realistic simulations and to validate the simulated thermal behavior through affordable tests. In this context, the detailed variation of the optical performance of a TC mortar is characterized in this work under dynamic conditions, both for increasing and decreasing temperatures. The specific solar reflectance is determined for each temperature within the transition range with a resolution of 1 °C. The key factor is to couple the time for each measurement and the rate of temperature variation of the material. Furthermore, an affordable setup is defined to quantify the effect of the TC mortar on the surface temperature of facades compared to conventional coatings. The configuration adequately reproduces the relative orientation of facade coatings with respect to solar radiation. In addition, it ensures comparable exposure to solar radiation on all surfaces under analysis. Outdoor tests are carried out during three periods that represent the autumn, winter and summer climates in Madrid (Spain) and the experimental results are consistent with previous energy simulations. The methodology proposed in this work will be useful for the characterization of TC materials with greater durability currently under development. It will allow for more precise energy simulations and quantitative estimates of the effect of TC façade cladding on the sustainability of buildings., This work was supported by Ministry of Economy, Industry and Competitiveness of Spain [project BIA2014-56827-R]. Dr. Paloma Sirvent work was supported by the Department of Education, Youth and Sports of Madrid and the European Social Fund, through the Youth Employment Initiative [PEJD-2018-POST/IND-8684].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental analysis of a prototype for a thermochromic Trombe wall

  • Martínez, Arturo
  • Alonso, Carmen
  • Martín-Consuegra, Fernando
  • Pérez Álvarez-Quiñones, Gloria
  • Frutos Vázquez, Borja
  • Gutiérrez, Álvaro
Ambitious and innovative refurbishment measures will be required to meet the European Union’s goals for limiting building energy consumption. Envelope efficiency can be enhanced, for instance, with new materials and improved passive techniques. Trombe walls (TWs), one such technique, reduce heating demand in winter, although they cause overheating in warm climates. That drawback may be corrected with thermal-optically reversible materials. In this study, a thermochromic mortar was applied to a prototype TW to reduce solar absorption in summer without affecting its wintertime efficacy. Further to field measurements, the maximum surface temperature reached on the wall’s thermochromic cladding (TCC) was 32°C in winter and 44.7°C in summer. The indoor cold weather temperature in the module ranged from 7.9°C to 16.5°C for a mean of 11°C, compared to 25.1°C to 32.2°C with a mean of 28.9°C in warm weather. Ventilating the air gap at 60–200 ach prevented the cladding from fading to nearly colourless in winter. In light of the improved thermal transfer performance delivered, the TTW proposed can profitably be used for energy refurbishment in existing buildings., This research was supported by the grants from Ministry of Economy and Competitiveness of Spain [Project BIA2014-56827R], and from the CSIC in the i-Link + 2019 call under the project LINKA20220 Project ‘Nanotechnology-based thermochromic materials for adaptive building envelopes’ (2020–2021). Funding was also received from Mexico’s National Council of Science and Technology (CONACYT) and the Foundation of the National Institute of Fine Arts (FINBA). This research was supported by the grants from Ministry of Economy and Competitiveness of Spain, under the Project BIA2014-56827R, and from the CSIC in the i-Link + 2019 call under the project LINKA20220 Project ‘Nanotechnology - based thermochromic materials for adaptive building envelopes’ (2020-2021). Funding was also received from Mexico’s National Council of Science and Technology (CONACYT) and the foundation of the National Institute of Fine Arts (FINBA). The support provided by the Spanish Meteorological State Agency (AEMET) in the form of data is gratefully acknowledged., Peer reviewed