Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution of Isolated Atoms and Clusters in Catalysis

  • Corma, Avelino
  • Liu, Lichen
Structural transformation and evolution of active metal sites can occur in metal-catalyzed reactions in both homogeneous and heterogeneous systems. Such structural changes have an important impact on the catalytic behavior, including activity, selectivity, and stability. Aiming to establish a link between homogeneous and heterogeneous catalytic systems, this review begins with a discussion on dynamic structural transformations of metal catalysts in homogeneous reactions and the corresponding implications. We then discuss the evolution of isolated metal atoms and clusters in heterogeneous catalysts during catalyst activation and under reaction conditions. Finally, strategies for stabilizing subnanometric metal species on solid supports are presented for potential industrial applications., We are grateful for financial support from the EU through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the ‘Severo Ochoa Program’ (SEV-2016-0683).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the Catalytic Properties of UiO-66 Metal-Organic Frameworks: From Lewis to Defect-Induced Brønsted Acidity

  • Cirujano, F.G.
  • Llabrés i Xamena, Francesc X.
The Lewis/Brønsted acidity and catalytic properties of UiO-66-type metal-organic frameworks are studied in the context of tunable acid catalysts based on the presence of linker defects that create coordinatively unsaturated Zr4+ centers. Fourier transform infrared spectroscopy of adsorbed CO and direct pH measurements are employed to characterize hydrated and dehydrated UiO-66 containing different number of Zr4+ sites associated with defects. These sites can strongly polarize coordinated water molecules, which induces Brønsted acidity in the hydrated material. Upon dehydration of the solid, the coordinated water molecules are removed, and the underlying coordinatively unsaturated Zr4+ cations become exposed and available as Lewis acid sites. Herein we show, for various acid-catalyzed reactions, how it is possible to shift from a Brønsted acid to a Lewis acid catalyst by simply controlling the hydration degree of the solid. This control adds a new dimension to the design and engineering of MOFs for catalytic applications., Financial support by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and the Severo Ochoa program (SEV-2016-0683).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Confining isolated atoms and clusters in crystalline porous materials for catalysis

  • Liu, Lichen
  • Corma, Avelino
Structure–reactivity relationships for nanoparticle-based catalysts have been greatly influenced by the study of catalytic materials with either supported isolated metal atoms or metal clusters comprising a few atoms. The stability of these metal species is a key challenge because they can sinter into large nanoparticles under harsh reaction conditions. However, stability can be achieved by confining the nanoparticles in crystalline porous materials (such as zeolites and metal–organic frameworks). More importantly, the interaction between the metal species and the porous framework may modulate the geometric and electronic structures of the subnanometric metal species, especially for metal clusters. This confinement effect can induce shape-selective catalysis or different chemoselectivity from that of metal atoms supported on open-structure solid carriers. In this Review, we discuss the structural features, synthesis methodologies, characterization techniques and catalytic applications of subnanometric species confined in zeolites and metal–organic frameworks. We make a critical comparison between confined and non-confined isolated atoms and metal clusters, and provide future perspectives for the field., We are grateful for financial support from the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish Government through the Severo Ochoa Program (SEV-2016-0683)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalysis in Confined Spaces of Metal Organic Frameworks

  • Dhakshinamoorthy, Amarajothi
  • Asiri, Abdullah M.
  • García Gómez, Hermenegildo
Compared to homogeneous catalysis, heterogeneous catalysis can achieve product selectivity due to spatial constraints and differences in molecular dimensions of substrates and products by performing the reaction in a confined space. Shape selectivity for substrates, products or transition states is a well-established phenomenon observed in porous inorganic solids like zeolites with considerable impact in petrochemistry. More recently, metal organic frameworks (MOFs) have emerged as heterogeneous solid catalysts for a broad range of organic reactions due to their unique properties of large surface area, tuneable pore volume and high density of sites. The present mini-review aims to describe the current evidences showing MOFs as shape-selective catalysts. After a brief introduction on the concept, types and examples of shape-selectivity, the available data on MOFs as shape-selective catalysts have been organized according the nature of active sites promoting the reaction, starting from metal nodes as Lewis acid sites and commenting examples of encapsulated metal nanoparticles (NPs) and molecular guests as centers in various reactions such as addition to carbonyl compounds, hydrogenations, oxidations and oxidative dehydrogenations. The final section provides our view on the current achievements and prospective for future developments in the field., HG acknowledges the financial assistance rendered through Spanish Ministry of Science and Innovation (Severo Ochoa and CTQ2018‐980237‐CO2‐1and Generalitat Valenciana (Prometeo 2017–083). A.D. extends his thanks to University Grants Commission (UGC), New Delhi, for awarding Assistant Professorship through Faculty Recharge Programme. A.D. is also thankful to Science Engineering Research Board for the financial assistance by Extra Mural Research grant (EMR/2016/006500).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal organic frameworks for biomass conversion

  • Fang, R.
  • Dhakshinamoorthy, Amarajothi
  • Li, Y.
  • García Gómez, Hermenegildo
Biomass is increasingly used as a source of fuels and chemicals as a renewable alternative to fossil feedstocks. Cellulose, hemicellulose and lignin are converted into platform chemicals from which a large range of compounds are derived with different structures. These biomass transformation processes require the use of efficient and durable catalysts that should drive the selectivity of the process. This review focuses on the use of metal-organic frameworks (MOFs) and derivatives as catalysts for biomass conversion. After an introduction setting up the importance of the field and the MOF features that justify their prevalence as heterogeneous catalysts for liquid phase reactions, the two main parts of the review are the description of MOF synthesis and adaptation and coverage of the catalytic reactions involving biomass substrates organized according to the type of MOF. The last section summarizes the current state of the art and our outlook for the future development of the field., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and CTQ2018-980237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. A. D. thanks the University Grants Commission (UGC), New Delhi, for the award of an Assistant Professorship under its Faculty Recharge Programme. A. D. thanks the Science Engineering Research Board (SERB), Department of Science and Technology, India, for the financial support through Extra Mural Research Funding (EMR/2016/006500). A. D. thanks the University Grants Commission, New Delhi, for the award of an Assistant Professorship under its Faculty Recharge Programme. Y. L. and R. F. thank the National Natural Science Foundation of China (21825802, 21908068), the Fundamental Research Funds for the Central Universities (2019PY11, 2019MS041), the Science and Technology Program of Guangzhou (201804020009), the State Key Laboratory of Pulp and Paper Engineering (2017ZD04, 2018TS03), and the Natural Science Foundation of Guangdong Province (2016A050502004, 2017A030312005, 2020A1515010376).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous Single-Crystal-Based Inorganic Semiconductor Photocatalysts for Energy Production and Environmental Remediation: Preparation, Modification, and Applications

  • Niu, Jinan
  • Albero, J.
  • Atienzar, Pedro
  • García Gómez, Hermenegildo
Semiconductor photocatalytic and photovoltaic performance depends on crystallinity and surface area to a large extent. One strategy that has recently emergyed to improve semiconductor photoresponse efficiency is their synthesis as porous single crystals (PSCs), therefore providing simultaneously high crystallinity, minimization of grain boundaries, and large specific surface area. Other factors, such as high density of active sites, and enhanced light absorption, also contribute to increased PSC photoresponse with respect to analogous bulk or amorphous materials. This review initially presents the concept and main properties of PSCs. Then, the synthetic routes and the applications as photocatalysts and as photovoltaic devices, mainly in sunlight applications, are summarized. The synthetic procedures have been classified according to the mechanism of pore generation. Applications cover photocatalysis for environmental remediation, solar fuels production, selective photooxidation of organic compounds, and photovoltaic devices. Finally, a summary and views on future developments are provided. The purpose of this review is to show how the use of PSCs is a powerful general methodology applicable beyond metal oxides and can ultimately lead to sufficient photoresponse efficiency, bringing these processes close to commercial application., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016‐0683 and RTI2018‐89023‐CO2‐R1) and by the Generalitat Valenciana (Prometeo 2017–083) is gratefully acknowledged. J.N. also gratefully acknowledges financial support from the Fundamental Research Funds for the Central Universities (2019XKQYMS76).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Applications of Zeolites to C1 Chemistry: Recent Advances, Challenges, and Opportunities

  • Zhang, Qiang
  • Yu, J.
  • Corma, Avelino
C1 chemistry, which is the catalytic transformation of C1 molecules including CO, CO, CH, CHOH, and HCOOH, plays an important role in providing energy and chemical supplies while meeting environmental requirements. Zeolites are highly efficient solid catalysts used in the chemical industry. The design and development of zeolite-based mono-, bi-, and multifunctional catalysts has led to a booming application of zeolite-based catalysts to C1 chemistry. Combining the advantages of zeolites and metallic catalytic species has promoted the catalytic production of various hydrocarbons (e.g., methane, light olefins, aromatics, and liquid fuels) and oxygenates (e.g., methanol, dimethyl ether, formic acid, and higher alcohols) from C1 molecules. The key zeolite descriptors that influence catalytic performance, such as framework topologies, nanoconfinement effects, Brønsted acidities, secondary-pore systems, particle sizes, extraframework cations and atoms, hydrophobicity and hydrophilicity, and proximity between acid and metallic sites are discussed to provide a deep understanding of the significance of zeolites to C1 chemistry. An outlook regarding challenges and opportunities for the conversion of C1 resources using zeolite-based catalysts to meet emerging energy and environmental demands is also presented., The authors thank the National Natural Science Foundation of China (Grants 21920102005, 21835002, and 21621001), the National Key Research and Development Program of China (Grant 2016YFB0701100), the 111 Project of China (B17020), and the Spanish Government through “Severo Ochoa” (SEV‐2016‐0683, MINECO) and PGC2018‐101247‐B‐I00 for supporting this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles

  • Liu, Lichen
  • Corma, Avelino
Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications., L.L. thanks the financial supports from National Key R&D Program of China (2022YFA1503901), National Natural Science Foundation of China (22272087), and Tsinghua University (Initiative Scientific Research Program 20211080079). A.C. thanks Spanish Government for support through the “Severo Ochoa Program” (SEV-2016-0683)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2016-0683)., Peer reviewed