Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

On the combination of TDDFT with molecular dynamics: New developments

  • Alonso, José Luis
  • Castro, Alberto
  • Echenique, Pablo
  • Rubio, Angel
In principle, we should not need the time-dependent extension of density-functional theory (TDDFT) for excitations, and in particular not for Molecular Dynamics (MD) studies: the theorem by Hohenberg and Kohn teaches us that for any observable that we wish to look at (including dynamical properties or observables dependent on excited states) there is a corresponding functional of the ground-state density. Yet the unavailability of such magic functionals in many cases (the theorem is a non-constructive existence result) demands the development and use of the alternative exact reformulation of quantum mechanics provided by TDDFT. This theory defines a convenient route to electronic excitations and to the dynamics of a many-electron system subject to an arbitrary time-dependent perturbation. This is, in fact, the main purpose of inscribing TDDFT in a MD framework -the inclusion of the effect of electronic excited states in the dynamics. However, as we will show in this review, it may not be the only use of TDDFT in this context. In this manuscript, we review two recent proposals: In Section 1.2, we show how TDDFT can be used to design efficient gsBOMD algorithms -even if the electronic excited states are in this case not relevant. The work described in Section 1.3 addresses the problem of mixed quantum-classical systems at thermal equilibrium., J. L. Alonso, A. Castro and P. Echenique acknowledge support from the research grants E24/3 (DGA, Spain), FIS2009-13364-C02-01 (MICINN, Spain). P. Echenique acknowledges support from the research grant 200980I064 (CSIC, Spain). A. Rubio acknowledges funding by the Spanish MEC (FIS2007-65702- C02-01), ACI-promciona project (ACI2009-1036), “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-319-07), the European Research Council through the advance grant DYNamo (267374), and the European Community through projects e-I3 ETSF (Contract No. 211956) and THEMA (228539).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Response functions in TDDFT: Concepts and implementation

  • Strubbe, David A.
  • Lehtovaara, Lauri
  • Rubio, Angel
  • Marques, Miguel A. L.
  • Louie, Steven G.
Many physical properties of interest about solids and molecules can be considered as the reaction of the system to an external perturbation, and can be expressed in terms of response functions, in time or frequency and in real or reciprocal space. Response functions in time-dependent densityfunctional theory (TDDFT) can be calculated by a variety of methods. Timepropagation is a non-perturbative approach in the time domain, whose static analogue is the method of finite differences. Other approaches are perturbative and are formulated in the frequency domain. The Sternheimer equation solves for the variation of the wavefunctions, the Dyson equation is used to solve directly for response functions, and the Casida equation solves for the excited states via an expansion in an electron-hole basis. These techniques can be used to study a range of different response functions, including electric, magnetic, structural, and k·p perturbations. In this chapter, we give an overview of the basic concepts behind response functions and the methods that can be employed to efficiently compute the response properties within TDDFT and the physical quantities that can be studied., DAS acknowledges support from the US National Science Foundation, Grant No. DMR10-1006184 and a graduate fellowship. LL and MALM acknowledges support from the French ANR (ANR-08-EXC8-008-01). AR acknowledges funding by the European Research Council Advanced Grant DYNamo (ERC-2010-AdG -Proposal No. 267374) Spanish MICINN (FIS2010-21282-C02-01), ACI-promociona project (ACI2009-1036), “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-319-07), and the European Community through e-I3 ETSF project (Contract No. 211956). SGL was supported by the Director, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, U.S. Department of Energy under Contract No. DEAC02-05CH11231., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Computational design of chemical nanosensors: Transition metal doped single-walled carbon nanotubes

  • Mowbray, Duncan J.
  • García-Lastra, J. M.
  • Larraza Arocena, Iker
  • Rubio, Angel
  • Thygesen, Kristian S.
  • Jacobsen, K. W.
Chapter 7 in "Chemical Sensors: Simulation and Modeling", Ghenadii Korotcenkov (ed.)., We present a general approach to the computational design of nanostructured chemical sensors. The scheme is based on identification and calculation of microscopic descriptors (design parameters) which are used as input to a thermodynamic model to obtain the relevant macroscopic properties. In particular, we consider the functionalization of a (6,6) metallic armchair single-walled carbon nanotube (SWNT) by nine different 3d transition metal (TM) atoms occupying three types of vacancies. For six gas molecules (N_{2}, O_{2}, H_{2}O, CO, NH_{3}, H_{2}S) we calculate the binding energy and change in conductance due to adsorption on each of the 27 TM sites. For a given type of TM functionalization, this allows us to obtain the equilibrium coverage and change in conductance as a function of the partial pressure of the "target" molecule in a background of atmospheric air. Specifically, we show how Ni and Cu doped metallic (6,6) SWNTs may work as effective multifunctional sensors for both CO and NH_{3}. In this way, the scheme presented allows one to obtain macroscopic device characteristics and performance data for nanoscale (in this case SWNT) based devices., We acknowledge funding through the European Research Council Advanced Grant DYNamo (ERC-2010-AdG -Proposal No. 267374), Spanish “Juan de la Cierva” and José Castillejo programs (JCI-2010-08156), Spanish Ministerio de Ciencia e Innovación (FIS2010-21282-C02-01, FIS2010-19609-02-01), Spanish “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-319-07, IT-366-07), and ACI-Promociona (ACI2009-1036), ARINA, NABIIT and the Danish Center for Scientific Computing. The Center for Atomic-scale Materials Design (CAMD) is sponsored by the Lundbeck Foundation., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Gas sensing and thermal transport through carbon-nanotube-based nanodevices

  • Pouillon, Yann
  • Pérez Paz, Alejandro
  • Mowbray, Duncan J.
  • García-Lastra, J. M.
  • Kukovecz, Ákos
  • Rubio, Angel
et al., Designing nanoscale devices, such as gas sensors and thermal dissipators, is challenging at multiple levels. Exploring their properties through combined experimental and theoretical collaborations is a valuable approach that expands the understanding of their peculiarities and allows for the optimization of the design process. In order to select the most relevant functional molecules for carbon-based gas sensors, and provide the best sensitivity and selectivity possible, we study the electronic transport properties of functionalized carbon nanotubes (CNTs), both through experiments and theoretical calculations. The measurements are carried out both in argon and synthetic air, using CO, NO, and H2S as test cases, with carboxyl-functionalized CNTs. The calculations, performed in the framework of density functional theory, consider both metallic and semi-conducting prototype CNTs, with respective chiralities (6,6) and (7,0), exploring a broader range of functional molecules and gases. The behavior of individual carboxyl-functionalized CNTs deduced from the multiscale results consistently reflect what happens at a larger scale and provides useful insights regarding the experimental results. CNTs are excellent thermal conductors as well and show much promise as heat dissipators in microelectronics. However, in practice, thermal properties of CNTs are affected due to the unavoidable presence of defects and interface with the environment. We investigated these limitations using a multiscale approach. Using molecular dynamics simulations, here we investigate the heat flow across the interface of a (10,10) CNT with various substances, including air and water. We also analyzed computationally the impact of CNT defects on its thermal transport properties using first principles calculations., We acknowledge financial support from the European Union through the FP7 project: “Thermal management with carbon nanotube architectures” (THEMA-CNT, contract number 228539), the European Research Council Advanced Grant DYNamo (ERC-2010-AdG - 267374) and European Commission projects CRONOS (Grant number 280879-2 CRONOS CP-FP7) and POCAONTAS (FP7-PEOPLE-2012-ITN. Project number 316633). We also received financial support from the Spanish Grants FIS2011-65702-C02-01 and PIB2010US-00652, as well as from the Ikerbasque foundation. Y.P. and A.R. acknowledge funding by the Spanish MEC (FIS2007-65702-C02-01), “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-319-07 & IT578-13). Y.P. also acknowledges a contract funded by MICINN (PTA2008-0982-I) and ETORTEK-inanoGUNE (2009–2011)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Dynamical processes in open quantum systems from a TDDFT perspective: Resonances and electron photoemission

  • Larsen, Ask Hjorth
  • Giovannini, Umberto de
  • Rubio, Angel
We present a review of different computational methods to describe time-dependent phenomena in open quantum systems and their extension to a density-functional framework. We focus the discussion on electron emission processes in atoms and molecules addressing excited-state lifetimes and dissipative processes. Initially we analyze the concept of an electronic resonance, a central concept in spectroscopy associated with a metastable state from which an electron eventually escapes (electronic lifetime). Resonances play a fundamental role in many time-dependent molecular phenomena but can be rationalized from a time-independent context in terms of scattering states. We introduce the method of complex scaling, which is used to capture resonant states as localized states in the spirit of usual bound-state methods, and work on its extension to static and time-dependent density-functional theory. In a time-dependent setting, complex scaling can be used to describe excitations in the continuum as well as wave packet dynamics leading to electron emission. This process can also be treated by using open boundary conditions which allow time-dependent simulations of emission processes without artificial reflections at the boundaries (i.e., borders of the simulation box). We compare in detail different schemes to implement open boundaries, namely transparent boundaries using Green functions, and absorbing boundaries in the form of complex absorbing potentials and mask functions. The last two are regularly used together with time-dependent density-functional theory to describe the electron emission dynamics of atoms and molecules. Finally, we discuss approaches to the calculation of energy and angle-resolved time-dependent pump–probe photoelectron spectroscopy of molecular systems., We acknowledge financial support from the European Research Council Advanced Grant DYNamo (ERC-2010-AdG-267374), Ministerio de Economia y Competitividad or MINECO, Spanish Grant (FIS2013-46159-C3-1-P), Grupos Consolidados UPV/EHU del Gobierno Vasco (IT578-13), European Commission FP7 project CRONOS (Grant number 280879-2), COST Actions CM1204 (XLIC), and MP1306 (EUSpec)., Peer reviewed