Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing the adsorption mechanisms of nitroxides on ultrapure, metallicity-sorted carbon nanotubes

  • Ruiz-Soria, Georgina
  • Pérez Paz, Alejandro
  • Mowbray, Duncan J.
  • Rubio, Angel
  • Goldoni, Andrea
  • Ayala, Paola
  • Pichler, Thomas
Terms of Use CC-BY.-- et al., Carbon nanotubes are a natural choice as gas sensor components given their high surface to volume ratio, electronic properties, and capability to mediate chemical reactions. However, a realistic assessment of the interaction of the tube wall and the adsorption processes during gas phase reactions has always been elusive. Making use of ultraclean single-walled carbon nanotubes, we have followed the adsorption kinetics of NO2 and found a physisorption mechanism. Additionally, the adsorption reaction directly depends on the metallic character of the samples. Franck–Condon satellites, hitherto undetected in nanotube–NOx systems, were resolved in the N 1s X-ray absorption signal, revealing a weak chemisorption, which is intrinsically related to NO dimer molecules. This has allowed us to identify that an additional signal observed in the higher binding energy region of the core level C 1s photoemission signal is due to the C═O species of ketene groups formed as reaction byproducts . This has been supported by density functional theory calculations. These results pave the way toward the optimization of nanotube-based sensors with tailored sensitivity and selectivity to different species at room temperature., This work was supported by the Austrian Science Fund through Project FWF P21333-N20 and by the EU Proposal No. 20105285 for ELETTRA. P.A. was supported by a Marie Curie Intra European Fellowship within the Seventh European Community Framework Programme. D.J.M. acknowledges funding through the Spanish “Juan de la Cierva” program (JCI-2010-08156). We acknowledge funding by the European Research Council Advanced Grant DYNamo (ERC-2010-AdG-Proposal No. 267374), Spanish Grants (FIS2010-21282-C02-01 and PIB2010US-00652), “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-319-07 and IT-578-13), and the European Commission project CRONOS (280879-2 CRONOS CP-FP7) and POCAONTAS (FP7-PEOPLE-2012-ITN). A.G. thanks the COST ACTION EuNetAir (No. TD1105)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the effect of a single solvent molecule on the charge-transfer band of a donor-acceptor anion

  • Houmøller, Jørgen
  • Wanko, Marius
  • Støchkel, Kristian
  • Rubio, Angel
  • Brøndsted Nielsen, Steen
Many biochromophore anions located within protein pockets display charge-transfer (CT) transitions that are perturbed by the nearby environment, such as water or amino acid residues. These anions often contain the phenolate moiety as the electron donor and an acceptor group that couples to the donor via a π-conjugated system. Here we show using action spectroscopy that single molecules of water, methanol, and acetonitrile cause blue shifts in the electronic transition energy of the bare m-nitrophenolate anion by 0.22, 0.22, and 0.12 eV, respectively (uncertainty of 0.05 eV). These shifts are similar to CC2-predicted ones and are in accordance with the weaker binding to the phenolate end of the ion by acetonitrile in comparison with water and methanol. The nitro acceptor group is almost decoupled from the phenolate donor, and this ion therefore represents a good model for CT excitations of an anion. We found that the shift caused by one acetonitrile molecule is almost half of that experienced in bulk acetonitrile solution, clearly emphasizing the important role played by the microenvironment. In protic solvents, the shifts are larger because of hydrogen bonds to the phenolate oxygen. Finally, but not least, we provide experimental data that serve to benchmark calculations of excited states of ion–solvent complexes., S.B.N. acknowledges support from The Lundbeck Foundation and The Danish Council for Independent Research Natural Sciences (10-082088). M.W. and A.R. acknowledge support from ERC Advanced Grant DYNamo (ERC-2010-AdG 267374), Spanish Grants (FIS2010-21282- C02-01 and PIB2010US- 00652), Grupo Consolidado UPV/EHU del Gobierno Vasco (IT578-13), and European Commission Projects CRONOS (Grant 280879-2 CRONOS CP-FP7) and POCAONTAS (FP7-PEOPLE-2012-ITN, Project 316633). M.W. acknowledges support from the MICINN “Juan de la Cierva” Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Loss spectroscopy of molecular solids: combining experiment and theory

  • Roth, Friedrich
  • Cudazzo, Pierluigi
  • Gatti, Matteo
  • Knupfer, M.
  • Rubio, Angel
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence.-- et al., The nature of the lowest-energy electronic excitations in prototypical molecular solids is studied here in detail by combining electron energy loss spectroscopy (EELS) experiments and state-of-the-art many-body calculations based on the Bethe–Salpeter equation. From a detailed comparison of the spectra in picene, coronene and tetracene we generally find a good agreement between theory and experiment, with an upshift of the main features of the calculated spectrum of 0.1–0.2 eV, which can be considered the error bar of the calculation. We focus on the anisotropy of the spectra, which illustrates the complexity of this class of materials, showing a high sensitivity with respect to the three-dimensional packing of the molecular units in the crystal. The differences between the measured and the calculated spectra are explained in terms of the small differences between the crystal structures of the measured samples and the structural model used in the calculations. Finally, we discuss the role played by the different electron–hole interactions in the spectra. We thus demonstrate that the combination of highly accurate experimental EELS and theoretical analysis is a powerful tool to elucidate and understand the electronic properties of molecular solids., We are grateful to the Deutsche Forschungsgemeinschaft for financial support (grant numbers KN393/13 and KN393/14). We acknowledge financial support also from the European Research Council Advanced Grant DYNamo (ERC-2010-AdG-267374), Spanish Grants (2010-21282-C02-01 and PIB2010US-00652), Grupos Consolidados UPV/EHU del Gobierno Vasco (IT578-13) and European Commission projects CRONOS (grant number 280879-2 CRONOS CP-FP7) and POCAONTAS (FP7-PEOPLE-2012-ITN. Project number 316633)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-space grids and the Octopus code as tools for the development of new simulation approaches for electronic systems

  • Andrade, Xavier
  • Strubbe, David A.
  • Giovannini, Umberto de
  • Larsen, Ask Hjorth
  • Oliveira, Micael J. T.
  • Alberdi-Rodríguez, Joseba
  • Varas, Alejandro
  • Theophilou, Iris
  • Helbig, N.
  • Verstraete, Matthieu J.
  • Stella, Lorenzo
  • Nogueira, Fernando
  • Aspuru-Guzik, Alán
  • Castro, Alberto
  • Marques, Miguel A. L.
  • Rubio, Angel
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence., Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of implementing and testing new physical models. Based on our experience with the Octopus code, in this article we discuss how the real-space approach has allowed for the recent development of new ideas for the simulation of electronic systems. Among these applications are approaches to calculate response properties, modeling of photoemission, optimal control of quantum systems, simulation of plasmonic systems, and the exact solution of the Schrödinger equation for low-dimensionality systems., XA acknowledges that part of this work was performed under the auspices of the U.S. Department of Energy at Lawrence Livermore National Laboratory under Contract DE-AC52-07A27344. XA and AA-G would like to thank the support received from Nvidia Corporation through the CUDA Center of Excellence program and the US Defense Threat Reduction Agency under contract no. HDTRA1-10-1-0046. DAS acknowledges support from the U.S. National Science Foundation graduate research program and IGERT fellowships, and from ARPA-E under grant DE-AR0000180. MJTO acknowledges financial support from the Belgian FNRS through FRFC project number 2.4545.12 “Control of attosecond dynamics: applications to molecular reactivity”. NH and IT received support from a Emmy-Noether grant from Deutsche Forschungsgemeinschaft. JAR, AV, UDG, AHL and AR ackowledge financial support by the European Research Council Advanced Grant DYNamo (ERC-2010-AdG-267374), European Commission project CRONOS (Grant number 280879-2 CRONOS CP-FP7), Marie Curie ITN POCAONTAS (FP7-PEOPLE-2012-ITN, project number 316633), OST Actions CM1204 (XLIC), and MP1306 (EUSpec), Spanish Grant (FIS2013-46159-C3-1-P) and Grupo Consolidado UPV/EHU del Gobierno Vasco (IT578-13). JAR acknowledges the Department of Education, Universities and Research of the Basque Government (grant IT395-10). AC acknowledges support from the grant FIS2013-46159-C3-2-P of the Spanish government., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanically interlocked single-wall sarbon nanotubes

  • Juan, Alberto de
  • Pouillon, Yann
  • Martín, Nazario
  • Rubio, Angel
  • Pérez, Emilio M.
Extensive research has been devoted to the chemical manipulation of carbon nanotubes. The attachment of molecular fragments through covalent-bond formation produces kinetically stable products, but implies the saturation of some of the C[BOND]C double bonds of the nanotubes. Supramolecular modification maintains the structure of the SWNTs but yields labile species. Herein, we present a strategy for the synthesis of mechanically interlocked derivatives of SWNTs (MINTs). In the key rotaxane-forming step, we employed macrocycle precursors equipped with two π-extended tetrathiafulvalene SWNT recognition units and terminated with bisalkenes that were closed around the nanotubes through ring-closing metathesis (RCM). The mechanically interlocked nature of the derivatives was probed by analytical, spectroscopic, and microscopic techniques, as well as by appropriate control experiments. Individual macrocycles were observed by HR STEM to circumscribe the nanotubes., A.d.J and E.M.P. are grateful for funding from the European Research Council (Starting Independent Research Grant MINT; ERC-2012-StG Proposal No. 307609) and the Spanish MINECO (CTQ2011-25714). N.M. acknowledges funding from the Spanish MINECO (CTQ2011-24652) and the Comunidad Autónoma de Madrid (MADRISOLAR-2 S2009/PPQ-1533). Y.P. and A.R. acknowledge funding from the European Research Council (Advanced Grant DYNamo; ERC-2010-AdG Proposal No. 267374), CRONOS (Grant number 280879-2 CRONOS CP-FP7), POCAONTAS (FP7-PEOPLE-2012-ITN-Project 316633), and the Spanish Grants FIS2010-21282-C02-01, as well as the “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-578-13). A.T.-P. was supported by a PICATA postdoctoral fellowship of the Moncloa Campus of International Excellence (UCM)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PFO-BPy solubilizers for SWNTs: Modelling of polymers from oligomers

  • Glanzmann, Livia N.
  • Mowbray, Duncan J.
  • Rubio, Angel
arXiv:1411.3275v1, Due to their exeptional physical properties, single walled carbon nanotubes (SWNTs) embedded in organic polymers (polymer-SWNT hybrid systems) are promising materials for organic photovoltaic devices. Already at the SWNT sorting and debundling step, polymers such as the copolymer of 9,9-dioctylfluorenyl-2,7-diyl and bipyridine (PFO-BPy) are used as solubilizers. However, to model polymer-SWNT hybrid systems, we must first determine the smallest oligomer needed to sufficiently describe the electronic and optical absorption properties of the polymer. To do so, we use time dependent density functional theory (TDDFT) to model the PFO-BPy polymer using the monomers, dimers and trimers of the PFO-BPy and Py-PFO-Py building blocks, which are also compared to the infinitely long polymer. We find the Py-PFO-Py monomer, with shortened side chains, already describes the PFO-BPy polymer within the expected accuracies of TDDFT., We acknowledge funding from the European Projects DYNamo (ERC-2010-AdG-267374), CRONOS (280879-2CRONOS CP-FP7) and POCAONTAS (FP7-PEOPLE-2012-ITN-316633); Spanish Grants (FIS2012-37549-C05-02, FIS2010- 21282-C02-01, PIB2010US-00652, JCI-2010-08156); and Grupos Consolidados UPV/EHU del Gobierno Vasco (IT-319-07)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Gas sensing and thermal transport through carbon-nanotube-based nanodevices

  • Pouillon, Yann
  • Pérez Paz, Alejandro
  • Mowbray, Duncan J.
  • García-Lastra, J. M.
  • Kukovecz, Ákos
  • Rubio, Angel
et al., Designing nanoscale devices, such as gas sensors and thermal dissipators, is challenging at multiple levels. Exploring their properties through combined experimental and theoretical collaborations is a valuable approach that expands the understanding of their peculiarities and allows for the optimization of the design process. In order to select the most relevant functional molecules for carbon-based gas sensors, and provide the best sensitivity and selectivity possible, we study the electronic transport properties of functionalized carbon nanotubes (CNTs), both through experiments and theoretical calculations. The measurements are carried out both in argon and synthetic air, using CO, NO, and H2S as test cases, with carboxyl-functionalized CNTs. The calculations, performed in the framework of density functional theory, consider both metallic and semi-conducting prototype CNTs, with respective chiralities (6,6) and (7,0), exploring a broader range of functional molecules and gases. The behavior of individual carboxyl-functionalized CNTs deduced from the multiscale results consistently reflect what happens at a larger scale and provides useful insights regarding the experimental results. CNTs are excellent thermal conductors as well and show much promise as heat dissipators in microelectronics. However, in practice, thermal properties of CNTs are affected due to the unavoidable presence of defects and interface with the environment. We investigated these limitations using a multiscale approach. Using molecular dynamics simulations, here we investigate the heat flow across the interface of a (10,10) CNT with various substances, including air and water. We also analyzed computationally the impact of CNT defects on its thermal transport properties using first principles calculations., We acknowledge financial support from the European Union through the FP7 project: “Thermal management with carbon nanotube architectures” (THEMA-CNT, contract number 228539), the European Research Council Advanced Grant DYNamo (ERC-2010-AdG - 267374) and European Commission projects CRONOS (Grant number 280879-2 CRONOS CP-FP7) and POCAONTAS (FP7-PEOPLE-2012-ITN. Project number 316633). We also received financial support from the Spanish Grants FIS2011-65702-C02-01 and PIB2010US-00652, as well as from the Ikerbasque foundation. Y.P. and A.R. acknowledge funding by the Spanish MEC (FIS2007-65702-C02-01), “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-319-07 & IT578-13). Y.P. also acknowledges a contract funded by MICINN (PTA2008-0982-I) and ETORTEK-inanoGUNE (2009–2011)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Modelling of polymer-carbon nanotube heterojunctions for photovoltaic applications

  • Glanzmann, Livia N.
A thesis presented to the University of the Basque Country UPV/EHU in fulfilment of the thesis requirement for the degree of Doctor of Philosophy in Physics of Nanostructures and Advanced Materials., Semiconducting single-walled carbon nanotubes (s-SWNT) are promising materialsfor efficient organic photovoltaics (OPVs). Unfortunately, the implementation of s-SWNTs has so far not lead to the expected increase in power conversion efficienciesof OPVs. For this reason, we want to study the electronic processes within polymer-SWNT heterojunctions. Transient spectroscopy provides direct information aboutphotoexcitation processes in blends. We modelled the transient spectrum of apolymer:fullerene:s-SWNT blend using Linear Response. Based on our results, weare able to explain the structure transient spectra of s-SWNT systems and theelectronic dynamics linked to it. Further, we studied the internal quantum efficiencyof different donor/acceptor blends by carrying out calculations of the Landauer-Bütticker conductance of prototypical donor/acceptor heterojunctions. We find adependence of the conductivity on the level alignment. By improving the levelalignment of the polymer and SWNT through the use of larger band gap SWNTs,one may obtain a dramatic improvement in OPV efficiency. In summary, our resultsprovide a deeper insight into the photoexcitation and electronic processes ofpolymer-carbon nanotube heterojunctions and thus support the development of moreefficient polymer-SWNT OPVs., I acknowledge funding from from the European Projects POCAONTAS (FP7-PEOPLE-2012- ITN- 316633), DYNamo (ERC-2010-AdG-267374), MOSTOPHOS (SEP-210187476), and EUSpec (COST Action MP-1306), and CRONOS (280879-2 CRONOS CP-FP7); Spanish Grants (FIS2012-37549-C05-02, FIS2010-21282-C02-01, PIB2010US-00652, JCI-2010-08156); and Grupos Consolidados UPV/EHU del Gobierno Vasco (IT-578-13); and the computational time from the BSC Red Espagnola de Supercomputacion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Confined linear carbon chains as a route to bulk carbyne

  • Shi, Lei
  • Rohringer, Philip
  • Suenaga, Kazu
  • Niimi, Yoshiko
  • Kotakoski, Jani
  • Meyer, Jannik C.
  • Peterlik, Herwig
  • Wanko, Marius
  • Cahangirov, Seymur
  • Rubio, Angel
  • Lapin, Zachary J.
  • Novotny, Lukas
  • Ayala, Paola
  • Pichler, Thomas
Strong chemical activity and extreme instability in ambient conditions characterize carbyne, an infinite sp1 hybridized carbon chain. As a result, much less has been explored about carbyne as compared to other carbon allotropes such as fullerenes, nanotubes and graphene. Although end-capping groups can be used to stabilize carbon chains, length limitations are still a barrier for production, and even more so for application. We report a method for the bulk production of long acetylenic linear carbon chains protected by thin double-walled carbon nanotubes. The synthesis of very long arrangements is confirmed by a combination of transmission electron microscopy, X-ray diffraction and (near-field) resonance Raman spectroscopy. Our results establish a route for the bulk production of exceptionally long and stable chains composed of more than 6,000 carbon atoms, representing an elegant forerunner towards the final goal of carbyne’s bulk production., This work was supported by the Austrian Science Fund (FWF, NanoBlends I 943–N19). L.S. acknowledges the scholarship supported by the China Scholarship Council. K.S. and Y.N. acknowledge the JST Research Acceleration Programme. J.K. and J.C.M. acknowledge financial support by the European Research Council Starting Grant No. 336453-PICOMAT. J.K. acknowledges FWF for funding through project MA14-009, as well as Vienna Scientific Cluster for computational time, and he also thanks G. Kresse and M. Marsman for their help in DFT calculations. S.C. acknowledges financial support from the Marie Curie Grant FP7-PEOPLE-2013-IEF project ID 628876. A.R. acknowledges financial support by the European Research Council Advanced Grant DYNamo (ERC-2010-AdG-267374), POCAONTAS (FP7-PEOPLE-2012-ITN No. 316633), MINECO (FIS2013-46159-C3-1-P), Grupo Consolidado UPV/EHU del Gobierno Vasco (IT578-13), AFOSR Grant No. FA2386-15-1-0006 AOARD 144088, and COST Action MP1306 (EUSpec). Z.J.L. and L.N. acknowledge Swiss National Science Foundation (CR2212-152944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling vacancy oxidation on metallicity-sorted carbon nanotubes

  • Mowbray, Duncan J.
  • Pérez Paz, Alejandro
  • Ruiz-Soria, Georgina
  • Sauer, Markus
  • Lacovig, Paolo
  • Dalmiglio, Matteo
  • Lizzit, Silvano
  • Yanagi, Kazuhiro
  • Goldoni, Andrea
  • Pichler, Thomas
  • Ayala, Paola
  • Rubio, Angel
arXiv:1608.01424v1, Pristine single-walled carbon nanotubes (SWCNTs) are rather inert to O2 and N2, which for low doses chemisorb only on defect sites or vacancies of the SWCNTs at the ppm level. However, very low doping has a major effect on the electronic properties and conductivity of the SWCNTs. Already at low O2 doses (80 L), the X-ray photoelectron spectroscopy (XPS) O 1s signal becomes saturated, indicating nearly all of the SWCNT’s vacancies have been oxidized. As a result, probing vacancy oxidation on SWCNTs via XPS yields spectra with rather low signal-to-noise ratios, even for metallicity-sorted SWCNTs. We show that, even under these conditions, the first-principles density functional theory calculated Kohn–Sham O 1s binding energies may be used to assign the XPS O 1s spectra for oxidized vacancies on SWCNTs into its individual components. This allows one to determine the specific functional groups or bonding environments measured. We find the XPS O 1s signal is mostly due to three O-containing functional groups on SWCNT vacancies: epoxy (C2>O), carbonyl (C2>C═O), and ketene (C═C═O), as ordered by abundance. Upon oxidation of nearly all of the SWCNT’s vacancies, the central peak’s intensity for the metallic SWCNT sample is 60% greater than that for the semiconducting SWCNT sample. This suggests a greater abundance of O-containing defect structures on the metallic SWCNT sample. For both metallic and semiconducting SWCNTs, we find O2 does not contribute to the measured XPS O 1s spectra., D.J.M. acknowledges funding through the Spanish “Juan de la Cierva” program (JCI-2010-08156). A.P.P. acknowledges funding through the Proyecto Diputación Foral de Gipuzkoa (Q4818001B), “Ayuda para la Especialización de Personal Investigador del Vicerrectorado de Investigación de la UPV/EHU-2013”, and the Spanish “Juan de la Cierva-incorporación” program (IJCI-2014-20147). P.A. was supported by a Marie Curie Intra European Fellowship within the seventh European Community Framework Programme. A.G. thanks the FIRB NANOSOLAR (RBAP11C58Y). We acknowledge funding by European Projects DYNamo (ERC-2015-AdG-694097), POCAONTAS (FP7-PEOPLE-2012-ITN-316633), MOSTOPHOS (GA no. 646259), and EUSpec (COST Action MP1306); Spanish Grants (FIS2013-46159-C3-1-P) and “Grupos Consolidados UPV/EHU del Gobierno” (IT-578-13); and the Air Force Office of Scientific Research (AFOSR) (FA2386-15-1-0006 AOARD 144088). This work was supported by the Austrian Science Fund through projects FWF P21333-N20, FWF P27769-N20, and FWF NanoBlends I 943-N19 and by EU Proposal no. 20105285 for ELETTRA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoinduced absorption within single-walled carbon nanotube systems

  • Glanzmann, Livia N.
  • Mowbray, Duncan J.
  • Figueroa del Valle, Diana Gisell
  • Scotognella, Francesco
  • Lanzani, Guglielmo
  • Rubio, Angel
arXiv:1602.00010v1, We study the photoabsorption properties of photoactive bulk polymer/fullerene/nanotube heterojunctions in the near-infrared region. By combining pump–probe spectroscopy and linear response time-dependent density functional theory within the random phase approximation (TDDFT-RPA) we elucidate the excited state dynamics of the E11 transition within (6,5) and (7,5) single-walled carbon nanotubes (SWNTs) and combined with poly(3-hexylthiophene-2,5-diyl) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) in P3HT/PCBM/SWNT blended samples. We find the presence of a photoinduced absorption (PA) peak is related mainly to the width of the photobleach (PB) peak and the charge carrier density of the SWNT system. For mixed SWNT samples, the PB peak is too broad to observe the PA peak, whereas within P3HT/PCBM/SWNT blended samples P3HT acts as a hole acceptor, narrowing the PB peak by exciton delocalization, which reveals a PA peak. Our results suggest that the PA peak originates from a widening of the band gap in the presence of excited electrons and holes. These results have important implications for the development of new organic photovoltaic heterojunctions including SWNTs., We acknowledge financial support from the European Projects POCAONTAS (FP7-PEOPLE-2012-ITN No. 316633), DYNamo (ERC-2010-AdG-267374), OLIMPIA (P7-PEOPLE-212-ITN No. 316832); Spanish Grants (FIS20113-46159-C3-1-P); Italian Grants (GGP12033); Grupos Consolidados UPV/EHU del Gobierno Vasco (IT-578-13); and computational time from the BSC Red Espanola de Supercomputacion., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Real-space grids and the Octopus code as tools for the development of new simulation approaches for electronic systems

  • Andrade, Xavier
  • Strubbe, David
  • De Giovannini, Umberto
  • Hjorth Larsen, Ask
  • Oliveira, Micael J.T.
  • Alberdi-Rodriguez, Joseba
  • Varas, Alejandro
  • Theophilou, Iris
  • Helbig, Nicole
  • Verstraete, Matthieu J.
  • Stella, Lorenzo
  • Nogueira, Fernando
  • Aspuru-Guzik, Alan
  • Castro, Alberto
  • Marques, Miguel A.L.
  • Rubio, Angel
Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of implementing and testing new physical models. Based on our experience with the Octopus code, in this article we discuss how the real-space approach has allowed for the recent development of new ideas for the simulation of electronic systems. Among these applications are approaches to calculate response properties, modeling of photoemission, optimal control of quantum systems, simulation of plasmonic systems, and the exact solution of the Schrodinger equation for low-dimensionality systems.