Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Nanostructured carbon materials: synthesis and applications

  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
The family of carbon nanostructures includes a great number of forms with different properties derived from their reduced dimensionality. In particular, carbon nanotubes (CNTs) and graphene show special electronic, optical, mechanical and chemical properties that allow their potential application in new materials and devices. The real possibilities of pristine CNTs and graphene depend on their synthetic origin, which can be roughly classified into methods starting from graphite and chemical vapor deposition (CVD) processes. Applications of CNTs and graphene encompass electronics, energy devices, multifunctional composites, catalysis and sensors. Their reduced size and weight suggest potential uses in portable, wearable and mobile equipment with a high added value., This work has been funded by MINECO and European Regional Development Fund (ENE 2016-79282-C5-1-R), Government of Aragon and European Social Fund (DGA-ESF-T66 “Grupo Consolidado”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Optimizing bacterial cellulose production towards materials for water remediation

  • Calvo Peña, Víctor
  • Torrubia, Javier
  • Blanco, Domingo
  • García-Bordejé, José Enrique
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
Cellulose is a renewable alternative to mass consumption plastics, but its manufacture by the classical methods is not sustainable due to the use of large amounts of strong acids, bases and/or organic species (e.g. ionic liquids) in its production, generating many residues. Bacterial cellulose (BC) has a simpler processing because it is much more cleanly generated. In this work, BC aerogels and xerogels are compared in order to ascertain how the bacterial culture conditions (pH, carbon and nitrogen sources) and the raw hydrogels processing determine their thermal stability, crystallinity index, swelling ratio and flammability. The most notable results are the influence of the drying method on the swelling ratio and the carbon source on the thermal stability. Finally, a feasible application of BC aerogels is presented by treating contaminated water and by capturing water within a non-polar solvent, taking advantage of the dry BC sorption capacity., Financial support was obtained from the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO), through project IJCI-2016-27789, the Spanish Research Agency (AEI) through GRAPEROS project (ref ENE2016-79282-C5-1-R1 and associated EU Regional Development Funds), and from Gobierno de Aragón (Grupo Reconocido DGA T03_17R, A02_17R and associated EU Regional Development Funds). Dr. J.M.G.-D. greatfully acknowledges MINEICO for his ‘Juan de la Cierva – Incorporación’ research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Carbon nanostructures and polysaccharides for biomedical materials

  • González Domínguez, José Miguel
  • Álvarez Sánchez, Miguel Ángel
  • Hadad, Caroline
  • Benito, Ana M.
  • Maser, Wolfgang K.
19 figures, 2 tables., Even though many members from the broad family of carbon nanostructures have been known to us for decades, and despite their promising potential in biology and medicine, there is still a long way ahead to reach the goal of using them in real applications. The cause of such a gap still lies in the persistent drawbacks of insolubility, processability difficulties, poor consistency of macroscopic assemblies and surface inertness of carbon nanostructures. However, solely their direct chemical derivatization might not solve the problem right away. New processing elements need to come into play, but this also twists the whole picture, as the toxicity and performance profiles become more complex. We herein analyse the potential of natural polysaccharides (with a particular focus on cellulose) towards hybrid materials and structures for biomedical purposes. The role that these biopolymers acquire when interfacing with carbon nanostructures goes far beyond a mere dispersing effect, but instead creates unprecedented synergies leading to hydrogels, aerogels, films or fibres with high biocompatibility and bioactivity. In this chapter, the history of carbon nanostructures and natural polysaccharides in the field of biomedical applications will be respectively reviewed, to subsequently go into detail of specific hybrids made with the most relevant biopolymers (namely cellulose, chitin, chitosan and alginate) with extraordinary prospects in biomedicine., Financial support was obtained from MINEICO under project ENE2016-79282-C5-1-R (AEI/UE/FEDER), the Gobierno de Aragón (Grupo Reconocido T03_20R), and a ‘Juan de la Cierva – Incorporación’ research grant (IJCI-2016- 27789)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3D structures

  • González Domínguez, José Miguel
  • Baigorri, Alejandro
  • Álvarez Sánchez, Miguel Ángel
  • Colom, E.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
11 figures, 1 table., In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray- or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures., This research was funded by Spanish MINEICO/MICINN, under project references ENE2016-79282-C5-1-R (AEI/UE/FEDER) and PID2019-104272RB-C51/AEI/10.13039/501100011033, and the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R). J.M.G.-D. greatly acknowledges Spanish MINEICO for his ‘Juan de la Cierva Incorporation’ contract and associated research funds (ref. IJCI-2016-27789). The APC predoctoral contracts of E.C. and M.Á.Á.-S. were funded by the Spanish MINEICO (BES2017-080020, including EU Social Funds) and the Gobierno de Aragón, respectively. The work performed at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R)., Peer reviewed