Pasar al contenido principal

DESARROLLO DE UN MODELO INTEGRAL DE INTERACCION VEHICULO/VIA EN CURVA PARA LA REDUCCION DEL IMPACTO ACUSTICO DEL TRANSPORTE FERROVIARIO

TRA2017-84701-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

A vibroacoustic model of the stationary railway wheel for sound radiation prediction through an axisymmetric approach

  • Andrés Ruiz, Víctor
  • Denia Guzmán, Francisco
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
[EN] In the literature, different dynamic models of the railway wheel have been developed to predict its sound radiation; however, there are still certain aspects that can be improved. Specifically, the high computational cost of these models, either because they solve the fluidstructure interaction or because they solve the dynamics and acoustics of the three-dimensional wheel, makes it difficult to carry out numerous simulations with the aim of achieving quieter designs. In the present work, a vibroacoustic model of the stationary wheel is developed through an axisymmetric approach, yielding an efficient and comprehensive acoustic prediction tool. The calculation methodology consists of, firstly, adopting an axisymmetric approach to solve the vibratory dynamics of the wheel from its cross-section, using finite element techniques; subsequently, the acoustic radiation of the three-dimensional wheel is calculated from the dynamics of the aforementioned section through an analytical formulation. Finally, the vibroacoustic model developed is validated via comparison with commercial software that solves the fluid-structure interaction, showing the aforementioned computational advantages that the former has over the latter., The authors gratefully acknowledge the financial support of Agencia Estatal de Investigación and European Regional Development Fund (grant FPU18/03999, project TRA2017-84701-R and project PID2020-112886RA-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Railway rolling noise mitigation through optimal track design

  • Andrés Ruiz, Víctor
  • Denia Guzmán, Francisco
  • Thompson, D. J.
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
[EN] The main goal of the present work lies in the identification of the railway track properties that influence acoustic radiation, as well as in the analysis of these properties for the reduction of sound levels. This is achieved through a dynamic model of the railway wheel and track that allows the study of rolling noise, produced as a result of the wheel/rail interaction. Once the vibrational response of the railway components is determined, the sound power radiated by them is evaluated. The influence of the track properties on the sound radiation is determined by analysing the acoustic power results of different track configurations. From the results obtained, a number of guidelines are presented for noise mitigation of the involved railway elements. Between the worst and the best track design, there are differences of approximately 7.4 dB(A) in the radiation considering the wheel, rail and sleeper noise., The authors gratefully acknowledge the financial support of Agencia Estatal de Investigación and European Regional Development Fund (grant FPU18/03999, project TRA2017-84701-R and project PID2020-112886RA-I00)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Rolling noise reduction through GA-based wheel shape optimization techniques

  • Garcia-Andrés, Xavier
  • Gutiérrez-Gil, Jorge
  • Andrés, Víctor Tomás
  • Denia, Francisco David
  • Martínez Casas, José|||0000-0001-5706-4951
[EN] Railway rolling noise is nowadays a major source of acoustic pollution in urban areas, with nearly up to 12 million people daily affected in Europe by this phenomenon [1]. Hence, the search for ways of decreasing such noise radiation has become a highly active and significant research field. Following this approach, a Genetic Algorithms-based shape optimization of the railway wheel [2] is developed with the aim of minimizing rolling noise. Different approaches are considered to address the problem, such as directly minimizing radiated Sound poWer Level (SWL) or using the maximization of the natural frequencies if computational efficiency is especially critical. A parametric Finite Element model is implemented for the wheel based on the most relevant geometric parameters in rolling noise radiation. For the acoustic calculation, the sound radiation models used in the TWINS software [3] are adopted, which also accounts for the whole dynamics of the wheel/rail system. Furthermore, for every candidate wheel proposed, a structural analysis is computed in order to check design feasibility in accordance with the corresponding standard [4]. In all cases, new geometries for the wheel cross section are achieved that reduce the radiated rolling noise., This study has been supported by the Agencia Estatal de Investigación and the European Regional Development Fund (project TRA2017-84701-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

On the calculation of the Kalker&apos, s creep coefficients for non-elliptical contact areas

  • Gómez-Bosch, Jorge
  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Carballeira, Javier|||0000-0002-4179-8499
[EN] FastSim is the most widely used tangential contact method due to its accuracy and computational efficiency. However, its use is limited to elliptic contact areas, as it needs results from Kalker’s Linear Theory, a Hertzian contact theory, to obtain the so-called elastic parameters. This makes FastSim unable to face some of the current railway challenges, such as wear, corrugation, Rolling Contact Fatigue (RCF), wheel flats, etc. Taking this limitation into account, in the present work, an alternative methodology to Kalker’s Linear Theory is proposed, which will enable FastSim to deal with non-Hertzian conditions., The authors gratefully acknowledge the financial support of Agencia Estatal de Investigación and European Regional Development Fund (grant PRE2018-084067 and project TRA2017-84701-R).