Pasar al contenido principal

MODELIZACION VIBROACUSTICA Y DESARROLLO DE DISPOSITIVOS OPTIMIZADOS DE REDUCCION SONORA PARA LA MITIGACION DE LA CONTAMINACION ACUSTICA DEL FERROCARRIL EN AREAS URBANAS

PID2020-112886RA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A model of a rotating railway wheel for the prediction of sound radiation

  • Andrés-Ruiz, Víctor Tomás
  • Thompson, D.J.
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
[EN] The axial symmetry of a railway wheel is taken into account to expand its vibrational response around the circumferential direction using Fourier series. This allows the vibroacoustic problem of the wheel to be formulated in a two-dimensional frame, solving for the dynamic and acoustic variables analytically in the circumferential direction. By adopting an Eulerian approach, the inertial effects associated with the rotation of the wheelset are included in the model, assuming a constant angular speed of rotation. To represent a railway wheelset, the wheel is constrained at the inner edge of the hub and the contribution of the rigid body motion of the wheelset is superimposed on its response. The latter is evaluated analytically under the assumption of small rigid body displacements. The computational efficiency of the proposed methodology is found to be three orders of magnitude greater than a full three-dimensional methodology, without compromising the accuracy. The results are compared in terms of acoustic radiation with the commercial package Ansys, showing similar sound power levels in almost all the frequency range apart from some differences at low frequencies due to the use of an acoustic model based on radiation ratios., This paper is part of the project PID2020-112886RA-I00, grant FPU18/03999 and grant EST21/00213 funded by MCIN/AEI/10.13039/501100011033 as well as by "ESF Investing in your future". The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Comprehensive dynamic models of railway wheelsets and tracks for the prediction of rolling noise

  • Andrés Ruiz, Víctor Tomás
[ES] El ruido de rodadura de vehículos ferroviarios presenta importantes desafíos en entornos urbanos y suburbanos, siendo precisa una comprensión integral de sus mecanismos subyacentes para una mitigación efectiva. Esta Tesis ofrece una investigación exhaustiva sobre la generación de ruido de rodadura, tanto en vías rectas como curvas, a través del desarrollo de modelos avanzados de alta frecuencia y herramientas de cálculo para una rigurosa predicción de niveles de ruido. El ruido de rodadura surge de la interacción entre las ruedas y los carriles en presencia de imperfecciones en sus superficies de contacto. Los principales componentes ferroviarios que contribuyen a la emisión acústica son las traviesas, los carriles y las ruedas. Las traviesas y los carriles están conectados por medio de las placas de asiento, mientras que las ruedas y los carriles están dinámicamente acoplados a través de su contacto. En consecuencia, cambios en cualquier componente pueden afectar al comportamiento dinámico y acústico del resto, subrayando la necesidad de un modelo integral para abordar eficazmente la radiación por ruido de rodadura. En esta Tesis se exploran y desarrollan diferentes modelos dinámicos de la vía y del eje montado. La vía, que se asume infinita, se describe utilizando la teoría de estructuras periódicas y se caracteriza por sus números y formas de onda. El eje montado se modeliza mediante el Método de Elementos Finitos y se caracteriza por sus frecuencias naturales y modos de vibración. La interacción rueda/carril se describe como una relación linealizada entre el movimiento relativo de ambos componentes y las fuerzas de contacto. Cabe indicar que los modelos explorados en este trabajo están formulados en el dominio de la frecuencia. Asimismo, se realiza un estudio de influencia del diseño de la vía en la radiación por ruido de rodadura, cuantificando los parámetros contribuyentes a la emisión acústica mediante técnicas estadísticas. Los resultados apuntan a que la geometría del carril tiene un impacto limitado en la radiación, mientras que las propiedades viscoelásticas de la vía, en particular la rigidez de la placa de asiento, desempeñan un papel fundamental en la generación de ruido. Es remarcable que, entre los distintos diseños, se han encontrado variaciones de hasta 7,4 dB(A) en la radiación acústica. Durante el desarrollo de esta investigación, se ha prestado atención al modelizado del eje montado. Su rotación se incluye usando coordenadas Eulerianas, lo que resulta un enfoque conveniente ya que el punto de contacto de la rueda con el carril permanece en una posición espacial constante. Dada la simetría axial de su geometría, la respuesta dinámica del eje montado se expande a lo largo de la dirección circunferencial mediante series de Fourier, lo que permite formular el comportamiento dinámico y acústico de este cuerpo tridimensional (3D) en un marco bidimensional (2D), resolviendo analíticamente la coordenada circunferencial. Esta metodología ofrece sin pérdida de generalidad una reducción del tiempo de cálculo computacional, lo que hace que el modelo sea idóneo para su integración en algoritmos de optimización. Por último, se realiza una investigación pionera sobre el ruido de rodadura cuando el vehículo negocia una curva. Si bien la curva está generalmente asociada con el ruido por chirridos, esta Tesis explora y confirma la importancia que también tiene el ruido de rodadura en estas condiciones. Para ello, se modelizan los efectos inerciales y giroscópicos que sufre un eje montado al describir una trayectoria curva. Además, diferentes fenómenos complejos que ocurren en el contacto rueda/carril, como por ejemplo el movimiento relativo entre estos elementos, se incorporan en el modelo de interacción. Los resultados indican que la posición del contacto rueda/carril sirve como un buen indicador del impacto que la negociación de una curva tiene en el ruido de rodadura., [CA] El soroll de rodament de vehicles ferroviaris presenta importants reptes en entorns urbans i suburbans, requerint una comprensió integral dels seus mecanismes subjacents per a una mitigació efectiva. Aquesta Tesi ofereix una investigació exhaustiva sobre la generació de soroll de rodament, tant en vies rectes com corbes, mitjançant el desenvolupament de models avançats d'alta freqüència i eines de càlcul per a la rigorosa predicció dels nivells de soroll radiat. El soroll de rodament sorgeix de la interacció entre les rodes i els carrils en presència d'imperfeccions en les seues superfícies de contacte. Els principals components ferroviaris que contribueixen a l'emissió acústica són les travesses, els carrils i les rodes. Les travesses i els carrils estan connectats a través de les plaques d'assentament, mentre que les rodes i els carrils estan acoblats mitjançant la seua interacció. En conseqüència, canvis en qualsevol component poden afectar al comportament dinàmic i acústic de la resta, subratllant la necessitat d'un model integral. En aquesta Tesi s'exploren i desenvolupen diversos models dinàmics de la via i de l'eix muntat. La via, que es considera infinita, es descriu utilitzant la teoria d'estructures periòdiques i es caracteritza pels seus números i formes d'ona. L'eix muntat es modelitza mitjançant el Mètode d'Elements Finits i es caracteritza per les seues freqüències naturals i modes de vibració. La interacció entre l'eix muntat i la via es descriu com una relació linealitzada entre el moviment relatiu d'ambdós components i les forces de contacte. Cal assenyalar que els models explorats en aquest treball estan formulats en el domini de la freqüència. Així mateix, es realitza un estudi d'influència del disseny de la via en la radiació, quantificant els paràmetres contribuents a l'emissió acústica mitjançant tècniques estadístiques. Els resultats apunten que la geometria del carril té un impacte limitat en la radiació sonora, mentre que les propietats viscoelàstiques de la via, en particular la rigidesa de la placa d'assentament, tenen un paper fonamental en la generació de soroll. És destacable que, entre els diferents dissenys, s'han trobat variacions de fins a 7,4 dB(A) en la radiació per soroll de rodament. Durant el desenvolupament d'aquesta investigació, s'ha prestat atenció al modelatge de l'eix muntat. La seua rotació s'inclou en la formulació utilitzant coordenades Eulerianes, la qual cosa resulta un enfocament convenient ja que el punt de contacte de la roda amb el carril roman en una posició constant. Donada la simetria axial de la seua geometria, la resposta dinàmica de l'eix muntat s'amplia al llarg de la direcció circumferencial mitjançant sèries de Fourier, permetent formular el comportament dinàmic i acústic d'aquest cos tridimensional (3D) en un marc bidimensional (2D), i resolent la coordenada circumferencial analíticament. Aquesta metodologia ofereix sense pèrdua de generalitat una reducció del temps de càlcul computacional, la qual cosa fa que el model siga idoni per a la seua integració en algoritmes d'optimització. Finalment, es realitza una investigació pionera sobre el soroll de rodament quan el vehicle negocia una corba. Si bé la corba està generalment associada amb el soroll per grinyols, aquesta Tesi explora i confirma la importància que també té el soroll de rodament en aquestes condicions. Per a això, es modelitzen els efectes inercials i giroscòpics que pateix un eix muntat al descriure una trajectòria corba. A més, diferents fenòmens complexes que ocorren en el contacte roda/carril, com el moviment relatiu entre aquests elements, s'incorporen en el model d'interacció. Els resultats indiquen que la posició del contacte roda/carril serveix com un bon indicador de l'impacte que la negociació d'una corba té en el soroll de rodament., [EN] Rolling noise emission in railway systems presents significant challenges in urban and suburban environments, requiring a comprehensive understanding of its underlying mechanisms for effective mitigation. This Thesis offers a thorough investigation into rolling noise generation, considering both tangent and curved tracks, through the development of advanced high-frequency models and calculation tools to predict noise levels accurately. Rolling noise arises from the interaction between railway wheels and tracks in the presence of roughness on their contact surfaces. The principal components contributing to the acoustic emission are the sleepers, rails, and wheels. Sleepers and rails are interconnected through rail pads, while wheels and rails are dynamically coupled due to their contact. Consequently, changes in any component might impact the dynamic and acoustic behaviour of all of them, outlining the necessity of a comprehensive model to address rolling noise radiation effectively. Various models for the track and wheelset are explored and developed in this Thesis. The track, assumed to be infinite, is described using periodic structure theory and it is characterised by its wavenumbers and waveshapes. The wheelset is modelled through the Finite Element Method (FEM) and it is characterised by its natural frequencies and vibration modes. The wheelset and track interaction is described as a linearised relationship between the relative motion of both components and the contact forces. The models examined in this work are formulated in the frequency domain. Identified track properties influencing rolling noise radiation are quantified using statistical techniques. While the rail geometry is found to have a limited impact on the total radiation, the viscoelastic properties of the track, particularly the rail pad stiffness, play a crucial role in noise generation. Variations up to 7.4 dB(A) were observed for different track designs. Special attention is devoted to the wheelset modelling in this Thesis. Its rotation is considered using Eulerian coordinates, a convenient approach as the wheel contact point with the rail remains at a constant spatial position. Given the axial symmetry of its geometry, the wheelset dynamic response is expanded around the circumferential direction using Fourier series, which yields a two-dimensional (2D) formulation of the dynamic and acoustic behaviour of this three-dimensional (3D) system, with the circumferential coordinate being solved analytically. This methodology, denoted as axisymmetric approach, offers a significant reduction in the associated computational calculation time while preserving accuracy, making the model well suited for its integration into optimisation algorithms. Lastly, a novel investigation into rolling noise when the vehicle negotiates a curve is conducted. While curved tracks are generally associated with squeal noise, this Thesis offers valuable insights into the importance of rolling noise as well. To achieve this, the inertial and gyroscopic effects associated with a wheelset running on a curve are modelled. Complex phenomena occurring at the wheel/rail contact, such as the relative motion between these two elements, are incorporated into the interaction model. The results indicate that the wheel/rail contact position serves as a reliable indicator of the impact of a curve on the rolling noise., This Thesis has been supported by Ministerio de Ciencia, Innovación y Universidades in the framework of the FPU grant program. Grants FPU18/03999, EST21/00213, and EST22/00353 as well as projects TRA2017-84701-R, PID2020-112886RA-I00, and PID2023-148483OB-I00 funded by MCIN/AEI/10.13039/501100011033, “ESF Investing in your future”, and “ERDF A way of making Europe” are acknowledged. The author also expresses his gratitude for the support provided by Programa PROMETEO/2021/046 of Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

A vibroacoustic model of the stationary railway wheel for sound radiation prediction through an axisymmetric approach

  • Andrés Ruiz, Víctor
  • Denia Guzmán, Francisco
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
[EN] In the literature, different dynamic models of the railway wheel have been developed to predict its sound radiation; however, there are still certain aspects that can be improved. Specifically, the high computational cost of these models, either because they solve the fluidstructure interaction or because they solve the dynamics and acoustics of the three-dimensional wheel, makes it difficult to carry out numerous simulations with the aim of achieving quieter designs. In the present work, a vibroacoustic model of the stationary wheel is developed through an axisymmetric approach, yielding an efficient and comprehensive acoustic prediction tool. The calculation methodology consists of, firstly, adopting an axisymmetric approach to solve the vibratory dynamics of the wheel from its cross-section, using finite element techniques; subsequently, the acoustic radiation of the three-dimensional wheel is calculated from the dynamics of the aforementioned section through an analytical formulation. Finally, the vibroacoustic model developed is validated via comparison with commercial software that solves the fluid-structure interaction, showing the aforementioned computational advantages that the former has over the latter., The authors gratefully acknowledge the financial support of Agencia Estatal de Investigación and European Regional Development Fund (grant FPU18/03999, project TRA2017-84701-R and project PID2020-112886RA-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational approach for the acoustic modelling of large aftertreatment devices with multimodal incident sound fields

  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • F. D. Denia|||0000-0003-4536-8610
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
[EN] The influence of multimodal incident sound fields on the acoustic behaviour of large aftertreatment devices incorporating a monolith is modelled and analysed in detail. The analytical mode matching method is applied to the compatibility conditions of the three-dimensional acoustic fields at the device geometric discontinuities, leading to the computation of the complex wave amplitudes in all the subdomains involved and the corresponding device transmission loss. To have a realistic model, three-dimensional propagation must be considered in the inlet/outlet ducts and chambers, while one-dimensional wave propagation has to be assumed along the small capillaries of the aftertreatment device monolith (such catalytic converters and particulate filters); therefore, the monolith can be replaced by a plane wave four-pole transfer matrix from an acoustical point of view. On the other hand, for large aftertreatment device inlet ducts such as those found in heavy-duty and off-road engines, the usual models with plane incident wave excitation are not accurate since the onset of higher order incident modes in the inlet duct is expected for the frequency range of interest. Therefore, a variation of the acoustic attenuation performance is likely to occur depending on these modes, similar to the results previously found in the case of large dissipative silencers. Results are presented for three different multimodal incident sound field hypotheses: equal modal amplitude, equal modal power and equal modal energy density. A relevant influence on the sound attenuation is found for the test problems considered in the current investigation., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Project supported by Grant PID2020-112886RA-I00 funded by MCIN/AEI/10.13039/501100011033 and Project PROMETEO/2021/046 from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence study of rail geometry and track properties on railway rolling noise

  • Andrés-Ruiz, Víctor Tomás
  • Thompson, D. J.
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
[EN] Wheel/rail interaction generates an excitation due to the roughness present on the surface of both components that produces vibration and consequently rolling noise. In this work, the railway track properties that most influence rolling noise are identified and this influence is analysed to reduce noise emission. The acoustic calculation methodology consists of characterizing the wheel using finite element techniques and the track using periodic structure theory. The influence of the track properties on the sound radiation is analysed by means of statistical techniques applied to the acoustic power results of different track configurations. To achieve this, the rail cross-section geometry is parameterized and numerous simulations are carried out by modifying these geometric parameters and the viscoelastic properties of the track components. Considering the contribution of the wheel, rail and sleeper, the results obtained indicate that the total radiation can be reduced by up to 7.4 dB(A) through an optimal combination of the track design parameters, compared to the worst combination found. In particular, the rail pad stiffness is shown to be the most influential parameter in the sound radiation., This paper is part of the project PID2020-112886RA-I00, grant FPU18/03999 and grant EST21/00213 funded by MCIN/AEI/10.13039/501100011033 as well as by "ESF Investing in your future". The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Railway rolling noise mitigation through optimal track design

  • Andrés Ruiz, Víctor
  • Denia Guzmán, Francisco
  • Thompson, D. J.
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
[EN] The main goal of the present work lies in the identification of the railway track properties that influence acoustic radiation, as well as in the analysis of these properties for the reduction of sound levels. This is achieved through a dynamic model of the railway wheel and track that allows the study of rolling noise, produced as a result of the wheel/rail interaction. Once the vibrational response of the railway components is determined, the sound power radiated by them is evaluated. The influence of the track properties on the sound radiation is determined by analysing the acoustic power results of different track configurations. From the results obtained, a number of guidelines are presented for noise mitigation of the involved railway elements. Between the worst and the best track design, there are differences of approximately 7.4 dB(A) in the radiation considering the wheel, rail and sleeper noise., The authors gratefully acknowledge the financial support of Agencia Estatal de Investigación and European Regional Development Fund (grant FPU18/03999, project TRA2017-84701-R and project PID2020-112886RA-I00)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Railway rolling noise in curved tracks: Dynamic modelling of the wheelset and influence of the curve

  • Andrés-Ruiz, Víctor Tomás
  • Thompson, D. J.
  • Bruni, Stefano
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
[EN] Railway wheelsets operating on curved tracks experience complex dynamic behaviour which can affect the generation of rolling noise. This paper presents a comprehensive study on the dynamic response of wheelsets on curved tracks and the associated rolling noise radiation from the wheel and track. A dynamic model is developed to accurately compute the vibrational response of the flexible wheelset, considering the inertial effects associated with its rotation and trajectory along the curved track. An axisymmetric approach is proposed, which reduces significantly the computational effort in comparison to a three-dimensional numerical model. Considering a railway vehicle and its interaction with the track, the rolling noise generated in curved conditions is evaluated. Noise radiated as a result of a vehicle running on curves of 300 m and 2 km radius is compared with a tangent track. Differences in the sound radiation are found among the acoustic levels associated with each wheelset, the steady-state position of such wheelsets on the rails being a key factor., This paper is part of the project PID2020-112886RA-I00, project PID2023-148483OB-I00, grant FPU18/03999, and grant EST22/00353 funded by MCIN/AEI/10.13039/501100011033 as well as by "ESF Investing in your future". The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic topology optimization using a mixed formulation and a three-material scheme

  • Ferrándiz-Catalá, Borja
  • F. D. Denia|||0000-0003-4536-8610
  • Martínez Casas, José|||0000-0001-5706-4951
  • Nadal, Enrique|||0000-0002-2808-298X
  • Ródenas, Juan José|||0000-0003-2195-7920
[EN] Topology optimization (TO) has demonstrated significant efficacy in generating innovative designs to minimize acoustic or elastic responses, providing sophisticated structures that mitigate challenges such as the harmful effects of urban noise pollution. However, vibroacoustic problems require distinct governing equations for air and structural subdomains, making standard density-based TO methods unsuitable. This challenge can be addressed by adopting a mixed displacement/pressure formulation, enabling unified modeling of air and structure. In this work, this formulation is applied only to a localized design subdomain to balance its high computational cost, while the remaining acoustic domain uses a conventional pressure-based approach. A three-material interpolation scheme is introduced to optimize designs with air, solid, and porous materials, and is applied to three case studies. Additionally, structural continuity and load-carrying capacity are ensured by incorporating a linear elasticity TO problem under realistic loading conditions, achieving robust, acoustically optimized designs., The authors gratefully acknowledge the financial support of project PID2020-112886RA-I00, and project PID2023-148483OB-I00, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Acoustic modelling of large aftertreatment devices with multimodal incident sound fields

  • F. D. Denia|||0000-0003-4536-8610
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[EN] The influence of multimodal incident sound fields on the acoustic behaviour of large aftertreatment devices (ATD) is analysed in detail. The mode matching method is applied to the compatibility conditions of the three-dimensional (3D) acoustic fields at the device geometric discontinuities, leading to the computation of the complex wave amplitudes in all the subdomains involved and the corresponding transmission loss (TL). To have a realistic model, 3D propagation must be considered in the inlet/outlet ducts and chambers, while 1D wave propagation has to be assumed along the small capillaries of the catalytic converter/particulate filter monoliths of the ATD; therefore, these monoliths can be replaced by plane wave four pole transfer matrices from an acoustical point of view [1]. On the other hand, for large ATD inlet ducts such as those found in heavy-duty and off-road engines, the usual models with plane incident wave excitation are not accurate since the onset of higher order incident modes in the inlet duct is expected for the frequency range of interest. Therefore, a TL variation is likely to occur depending on these modes, similar to the results found in large dissipative silencers [2]. Results are presented for three different multimodal incident sound field hypotheses [3]: equal modal amplitude (EMA), equal modal power (EMP) and equal modal energy density (EMED). A relevant influence on the sound attenuation is found for the test problems considered in the current investigation. References [1] Denia, F. D., Martínez-Casas, J., Carballeira, J., Nadal, E., Fuenmayor, F. J., Computational performance of analytical methods for the acoustic modelling of automotive exhaust devices incorporating monoliths. Journal of Computational and Applied Mathematics, 330: 995--1006, 2018. [2] Kirby, R., Lawrie, J. B., A point collocation approach to modelling large dissipative silencers. Journal of Sound and Vibration, 286: 313--339, 2005. [3] Mechel, F. P., Formulas of Acoustics. Berlin, Springer, 2008., The authors gratefully acknowledge Grants PID2020-112886RA-I00 and PID2020-118013RB-C21 funded by MCIN/AEI/10.13039/501100011033 and Project PROMETEO/2021/046 from Generalitat Valenciana.