Pasar al contenido principal

DESARROLLO DE MODELOS INTEGRALES PARA LA SIMULACION DE LA INTERACCION DINAMICA VEHICULO-DESVIO

PID2020-118013RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A linear non-Hertzian unsteady tangential wheel-rail contact model

  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Bruni, Stefano
  • Liu, Binbin
[EN] The increase in computational capacity has considerably reduced the use of linear models for wheel/rail tangential contact, being currently replaced by theories that adopt non-linear formulations able to address the most complex conditions realistically. However, linear formulations are difficult to replace in certain applications such as acoustic problem modelling, in which case a linear formulation of the track-contact-vehicle system is needed. The vibration that appears in this type of problem covers a wide range of audible frequencies, so, in addition to linearity, these theories are required to be non-stationary. The literature in contact mechanics gives response to this problem through models that consider low creepage levels, but it remains to cover other conditions in which the mean creepage is not small, such as when a railway vehicle negotiates a curve. This work presents a new theory of unsteady linear tangential rolling contact for non-Hertzian areas that considers kinematics as the sum of a constant creepage resulting from large stationary forces (such as those that occur when the vehicle negotiates a curve with constant radius) and small variable creepage due to a high-frequency phenomenon (e.g. the dynamic interaction between the vehicle and the track). The model is based on the Variational Theory (i.e. the CONTACT method for tangential problems), from which a linear formulation with variable creepage is deduced. According to this formulation, the non-steady state contact problem can be solved for any shape of the wheel/rail contact region, requiring a much smaller computational effort than the general unsteady CONTACT approach. The results show a satisfactory agreement of the proposed model to the unsteady CONTACT version, hence confirming the soundness of the proposed contact model., The first and third authors acknowledge the financial support through the grants PID2020-118013RB-C21 (funded by MCIN/AEI/10.13039/501100011033) and PROMETEO/2021/046 (funded by Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A direct method for the extension of FastSim under non-Hertzian contact conditions

  • Gómez-Bosch, Jorge
  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Carballeira, Javier|||0000-0002-4179-8499
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[EN] In wheel-rail contact mechanics, there coexist different models characterised by their ability to reproduce the real phenomenon and the time associated with computing the solution. In simulation of the vehicle dynamics, the increase in the computational performance places researchers close to a horizon in which it is possible to implement the most realistic theories (Variational Theory or finite elements), although at present the use of these models is mainly limited to offline calculations, far from real-time simulation. In this context, this work presents a tangential contact theory that is an intermediate point between simplified models (unable to model non-Hertzian contact) and more realistic models (whose complexity triggers simulation times). The tangential contact model proposed is based on the FastSim algorithm, whose precision comes from the algorithm convergence to the results of an exact adhesion theory (i.e. when creepages tend to zero). The impossibility of considering Kalker's Linear Theory as an adjustment method when the hypotheses of the Hertzian model are not fulfilled leads to the adoption of the Kalker's steady-state CONTACT version in adhesion conditions. The calculations presented through the proposed algorithm provide errors for creep forces lower than 4% with computational times one order lower than the Variational Theory., The authors gratefully acknowledge the financial support of the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the grant PID2020-118013RB-C21 and PRE2018-084067, the latter funded together with the EU Program 'ESF Investing in your future'. The acknowledge is extended to Generalitat Valenciana for the financing of the grant PROMETEO/2021/046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of rotation on the rolling noise radiated by wheelsets in high-speed railways

  • Knuth, C.
  • Squicciarini, G.
  • Thompson, D. J.
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[EN] Railway rolling noise is produced by the vibration of both the wheelsets and the track; the wheelsets dominate the high frequency noise and become increasingly important at high speed. The effect of rotation on the wheelset vibration and noise radiation is investigated using different wheelset models in a rolling noise prediction model for a wide range of speeds. Each wheelset model takes account of the rotation to a different extent. An axisymmetric finite element model of a flexible rotating wheelset is implemented based on a complex exponential formulation and expressed in either an inertial or a non-inertial frame of reference. The model can include the inertial Coriolis and centrifugal forces and is also extended to include stress stiffening. Modes of the rotating wheel with non-zero number of nodal diameters are split into co- and counter-rotating waves with separated natural frequencies. The extent of the frequency separation depends on the shape of the mode and its dominant component of vibration. At common train speeds the frequency shifts due to stress-stiffening and spin-softening effects are found to be small compared with the gyroscopic effects due to the Coriolis forces. The effect of including the inertial Coriolis and centrifugal forces on the overall A-weighted sound power level is less than 0.3 dB below 400 km/h, while for higher train speeds, differences may exceed 1 dB in some one-third octave bands. Overall, these differences are small compared with other sources of uncertainty in rolling noise modelling, confirming that representing the wheel rotation with a moving load approach provides a suitable approximation for use in rolling noise predictions., The fourth author acknowledges the financial support through the grant PID2020-118013RB-C21 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comprehensive model of a rotating flexible wheelset for high-frequency railway dynamics

  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Knuth, Christopher
  • Thompson, David J.
The first and second authors acknowledge the financial support through the grants PID2020-118013RB-C21 (funded by MCIN/AEI/10.13039/501100011033) and PROMETEO/2021/046 (funded by Generalitat Valenciana). The first author is very grateful to Dr Giacomo Squicciarini from the ISVR for the helpful discussions that contributed to increase the importance of the present work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fast version of &apos, CONTACT&apos, for normal problem calculations

  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • Gómez-Bosch, Jorge
  • Alonso, Asier
[EN] In its different versions, the CONTACT method developed by Prof. Kalker is the primary reference in wheel-rail contact mechanics. Despite adopting simplifications associated with the elastic behaviour of the solids and being a non-conformal contact theory, CONTACT provides precise solutions for most wheel-rail contact conditions, with lower computational and modelling costs than other numerical methods such as Finite Elements. Nevertheless, the computational cost of CONTACT is still too high for its implementation in dynamic simulation. The present work proposes a fast and accurate wheel-rail contact method for normal problems based on Kalker's CONTACT algorithm. Dissimilarly to CONTACT, the new method formulates the normal traction distribution through a suitable basis, which reduces the dimension of the problem. This method is able to faithfully reproduce the contact patch and the normal traction distribution, even when the yaw angle of the wheelset is non-zero. Results obtained with this method are compared with the ones calculated with CONTACT, and errors about 0.05% are obtained in normal contact forces, with a reduction on the computation cost between 30 and 60 times., Grant PRE2018-084067 funded by MCIN/AEI/10.13039/501100011033 and by the EU program "ESF Investing in your future". Grant PID2020-118013RB-C21 funded by MCIN/AEI/10.13039/501100011033. Grant PROMETEO/2021/046 funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study on the allowed maximum amplitudes of low-order polygonal wear on resilient wheels based on operational safety

  • Zhong, Shuoqiao
  • Zhou, Xin
  • Sheng, Xiaozhen
  • Hou, Chuanlun
  • Qi, Yuan
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[EN] Following the extensive use of resilient wheels on trams, several subways in China have started pre-launch testing of resilient wheels. While it remains at an early stage, the long-term behavior of the wheel has become a great concern for subway operators and wheel suppliers. To address the concern, this study focuses on derailment risk by evaluating the allowed maximum amplitudes of low-order polygonal wear on resilient wheels. Firstly, a metro vehicle-track dynamic system model equipped with resilient wheels is built. Then, based on the operation safety index and current re-profiling regulations for conventional wheels, the influence of wheel axial and radial stiffness on the radial amplitude limits of resilient wheel polygonal wear is analyzed. To perform the analysis, firstly the commonly-used stiffness for a resilient wheel (300 kN/mm in radial direction and 50 kN/mm in axial direction) is adopted to study the effect of resilient wheel polygonization on wheel load reduction ratio. Then, wheel load reduction ratio is predicted for different radial (up to 600 kN/mm) and axial (up to 100 kN/mm) stiffnesses of the resilient wheel and different orders (up to 10) of wheel polygonization of 1 mm amplitude. A contour plot is provided to illustrate how the wheel load reduction ratio varies with the harmonic order and amplitude of wheel polygonization under different combinations of resilient wheel's equivalent axial and radial stiffnesses. It is found that, with the increase of the amplitude of the polygonal wear of a certain harmonic order on resilient wheel, the number of the available combinations of the equivalent stiffnesses adopted by the resilient wheel becomes less by considering the operation safety indexed with wheel load reduction ratio. Besides, depending on the stiffness of the resilient wheel, the allowed amplitude corresponding to the polygonization of each order has been suggested with the contour plots., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work has been supported by the National Natural Science Foundation of China (52272352 and 52202477), as well as "SUESHigh-End Foreign Experts Recruitment Program". The last author acknowledges to the financial support through the grants PID2020-118013RB-C21 (funded by MCIN/AEI/10.13039/501100011033) and PROMETEO/2021/046 (funded by Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A geometric approach to wheel-rail contact accounting for non-prismatic rails in turnouts

  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Palsson, Bjorn
  • Alonso, Asier
[EN] This work introduces a comprehensive methodology for solving the geometric wheel-rail contact problem, applicable to both mainline tracks and turnouts. The approach accurately identifies all contact areas, computes the contact plane and determines distances between undeformed surfaces. Unlike traditional nonlinear methods that may miss critical contact points, this method ensures full intersection detection through an analytical closed-form solution between conical frustums (wheels) and linear segments (rails or turnout surfaces). The formulation supports parallel computation on CPUs or GPUs. The geometric model is coupled with the Variational Theory to address the elastic contact problem, enabling the calculation of approaches, potential contact zones and traction distributions. Principal Component Analysis defines the contact plane, while mapping techniques handle the representation of successive turnout profiles. Static simulations of wheelset positions at crossings reveal key phenomena, such as sudden shifts in contact locations, variations in overall contact stiffness and wheel radius differences that increase creepage and localised wear. These findings are crucial for improving the understanding of vehicle dynamics through turnouts and enhancing the design and maintenance of railway infrastructure., The authors acknowledge the financial support through the grant PID2020-118013RB-C21 (funded by MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Acoustic modelling of large aftertreatment devices with multimodal incident sound fields

  • F. D. Denia|||0000-0003-4536-8610
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[EN] The influence of multimodal incident sound fields on the acoustic behaviour of large aftertreatment devices (ATD) is analysed in detail. The mode matching method is applied to the compatibility conditions of the three-dimensional (3D) acoustic fields at the device geometric discontinuities, leading to the computation of the complex wave amplitudes in all the subdomains involved and the corresponding transmission loss (TL). To have a realistic model, 3D propagation must be considered in the inlet/outlet ducts and chambers, while 1D wave propagation has to be assumed along the small capillaries of the catalytic converter/particulate filter monoliths of the ATD; therefore, these monoliths can be replaced by plane wave four pole transfer matrices from an acoustical point of view [1]. On the other hand, for large ATD inlet ducts such as those found in heavy-duty and off-road engines, the usual models with plane incident wave excitation are not accurate since the onset of higher order incident modes in the inlet duct is expected for the frequency range of interest. Therefore, a TL variation is likely to occur depending on these modes, similar to the results found in large dissipative silencers [2]. Results are presented for three different multimodal incident sound field hypotheses [3]: equal modal amplitude (EMA), equal modal power (EMP) and equal modal energy density (EMED). A relevant influence on the sound attenuation is found for the test problems considered in the current investigation. References [1] Denia, F. D., Martínez-Casas, J., Carballeira, J., Nadal, E., Fuenmayor, F. J., Computational performance of analytical methods for the acoustic modelling of automotive exhaust devices incorporating monoliths. Journal of Computational and Applied Mathematics, 330: 995--1006, 2018. [2] Kirby, R., Lawrie, J. B., A point collocation approach to modelling large dissipative silencers. Journal of Sound and Vibration, 286: 313--339, 2005. [3] Mechel, F. P., Formulas of Acoustics. Berlin, Springer, 2008., The authors gratefully acknowledge Grants PID2020-112886RA-I00 and PID2020-118013RB-C21 funded by MCIN/AEI/10.13039/501100011033 and Project PROMETEO/2021/046 from Generalitat Valenciana.