Pasar al contenido principal

DESARROLLO DE UN MODELO INTEGRAL DE INTERACCION VEHICULO/VIA EN CURVA PARA LA REDUCCION DEL IMPACTO ACUSTICO DEL TRANSPORTE FERROVIARIO

PRE2018-084067

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A direct method for the extension of FastSim under non-Hertzian contact conditions

  • Gómez-Bosch, Jorge
  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Carballeira, Javier|||0000-0002-4179-8499
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[EN] In wheel-rail contact mechanics, there coexist different models characterised by their ability to reproduce the real phenomenon and the time associated with computing the solution. In simulation of the vehicle dynamics, the increase in the computational performance places researchers close to a horizon in which it is possible to implement the most realistic theories (Variational Theory or finite elements), although at present the use of these models is mainly limited to offline calculations, far from real-time simulation. In this context, this work presents a tangential contact theory that is an intermediate point between simplified models (unable to model non-Hertzian contact) and more realistic models (whose complexity triggers simulation times). The tangential contact model proposed is based on the FastSim algorithm, whose precision comes from the algorithm convergence to the results of an exact adhesion theory (i.e. when creepages tend to zero). The impossibility of considering Kalker's Linear Theory as an adjustment method when the hypotheses of the Hertzian model are not fulfilled leads to the adoption of the Kalker's steady-state CONTACT version in adhesion conditions. The calculations presented through the proposed algorithm provide errors for creep forces lower than 4% with computational times one order lower than the Variational Theory., The authors gratefully acknowledge the financial support of the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the grant PID2020-118013RB-C21 and PRE2018-084067, the latter funded together with the EU Program 'ESF Investing in your future'. The acknowledge is extended to Generalitat Valenciana for the financing of the grant PROMETEO/2021/046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fast version of &apos, CONTACT&apos, for normal problem calculations

  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • Gómez-Bosch, Jorge
  • Alonso, Asier
[EN] In its different versions, the CONTACT method developed by Prof. Kalker is the primary reference in wheel-rail contact mechanics. Despite adopting simplifications associated with the elastic behaviour of the solids and being a non-conformal contact theory, CONTACT provides precise solutions for most wheel-rail contact conditions, with lower computational and modelling costs than other numerical methods such as Finite Elements. Nevertheless, the computational cost of CONTACT is still too high for its implementation in dynamic simulation. The present work proposes a fast and accurate wheel-rail contact method for normal problems based on Kalker's CONTACT algorithm. Dissimilarly to CONTACT, the new method formulates the normal traction distribution through a suitable basis, which reduces the dimension of the problem. This method is able to faithfully reproduce the contact patch and the normal traction distribution, even when the yaw angle of the wheelset is non-zero. Results obtained with this method are compared with the ones calculated with CONTACT, and errors about 0.05% are obtained in normal contact forces, with a reduction on the computation cost between 30 and 60 times., Grant PRE2018-084067 funded by MCIN/AEI/10.13039/501100011033 and by the EU program "ESF Investing in your future". Grant PID2020-118013RB-C21 funded by MCIN/AEI/10.13039/501100011033. Grant PROMETEO/2021/046 funded by Generalitat Valenciana.