Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introducing a novel experimental setup for assessing the progressive collapse resistance of structures

  • Setiawan, Andri
  • Cetina-Berdugo, Diego Fernando
  • Gerbaudo, Maria Luz
  • Marin, Lorenzo|||0000-0002-7117-1291
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The paper describes the development process of a novel experimental setup to assess the ability of a structural system to arrest collapse propagation. Unlike traditional pushdown tests, the proposed setup allows more realistic interactions of different failure modes during a collapse process. The adopted boundary conditions and loading protocol were designed and calibrated using advanced computational simulations representing full-building (global) responses. Then, a particular portion of the building (subassembly) was extracted, scaled down, and constructed in our laboratory. It is expected that the new setup will help to reveal new and insightful information about the progressive collapse phenomenon., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral programs of the Generalitat Valenciana/Fons Social Europeu [CIAPOS/2023/216] and for the Evolve project (ref. CIGE/2023/199).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Fusibles estructurales para evitar la propagación de fallos en las cimbras de edificación

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
[ES] La construcción de edificios con estructura de hormigón armado se realiza, habitualmente, con la ayuda de puntales metálicos que se encargan de transmitir las cargas de las plantas recién hormigonadas a las inferiores. Los principales problemas que presenta el empleo de puntales son: a) la aparición de cargas superiores a las previstas en los puntales, pudiendo provocar el colapso de toda la cimbra o incluso del edificio, b) la heterogeneidad de las cargas que reciben los puntales de una misma planta cimbrada, y c) la limitada variedad de puntales de que disponen las casas comerciales. Todo ello obliga a que, en la mayor parte de las ocasiones, los puntales empleados en las obras estén claramente sobredimensionados. En este artículo se presenta el fusible estructural para el control de la carga de los puntales (también llamado limitador de carga o LL por sus siglas en inglés), que fue desarrollado en ICITECH a partir de estudios teóricos avanzados, una intensa campaña experimental y la ejecución de una prueba de concepto. El artículo se compone de: 1) una breve recopilación de los trabajos experimentales y de validación computacional llevados a cabo; y 2) el estudio realizado con simulación numérica avanzada para evaluar y cuantificar la posible mitigación del daño y el riesgo de fallo de estructuras de edificios durante su construcción. De los resultados obtenidos se puede afirmar que con el uso de LLs se consigue una mejora: de la seguridad, frente a fallos locales de la cimbra cuyas consecuencias podrían propagarse de forma desproporcionada; de la eficiencia estructural, con una mayor uniformidad en las cargas que reciben los puntales; y de los costes del sistema de apuntalamiento., Los autores quieren expresar su gratitud a todas las entidades por la financiación recibida (FPU13/02466; PRX17/00302; GV/2015/063; APOSTD/2019/101; 101000396; IJC2020- 042642-I), así como a las empresas Encofrado J. Alsina S.A. y Levantina, Ingeniería y Construcción S.L. por su invalorable cooperación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Structural fuse-based segmentation for limiting disproportionate building collapse: design requirements

  • Gerbaudo, Maria Luz|||0009-0003-2838-0316
  • Setiawan, Andri
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Our changing world exposes buildings to extreme events, causing localised failure that can spread and lead to a larger collapse. Existing standards and solutions focused solely on continuity that might be ineffective for extreme scenarios with large initial failures. This article presents a novel approach that combines continuity and segmentation called "fuse-based segmentation philosophy", taking advantage of the benefits of each. By subjecting a building to column losses through computational modelling, we can understand the behaviour of the building and ensure safety by allowing continuity in case of minor failures and segmentation in case of major collapses. Different failures are investigated to increase our understanding of the phenomenon, and various structural fuses are explored to prevent building col- lapses., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (Grant agree- ment No. 101000396).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Tests on a Full-Scale Precast Building for Robustness Assessment

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] As modern society faces unprecedented challenges related to climate stability and conflict, the need to design more sustainable and resilient buildings is undeniable. Several studies show that building with precast concrete components can result in significant advantages with respect to sustainability. However, the fact that such structures exhibit clear lines of weakness at the joints between elements can make them more vulnerable to progressive collapse. Although this can be overcome by adequate detailing of connections, there exist several uncertain factors which may affect the interaction between different precast elements and the global behaviour of such structural systems. This means that experimental testing is usually required for safe development of adequate solutions. Despite this fact, there have been very few studies on the robustness of precast concrete structures when compared to research on cast-in-place and steel structures. As such, this work presents the results of an ambitious experimental campaign involving the sudden removal of 3 different columns from a specifically built 15 m x 12 m two-storey precast concrete building incorporating simple and practical solutions to enhance robustness., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would like to acknowledge the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/ 10.13039/501100011033 and ¿ERDF A way of making Europe¿. The authors would also like to express their gratitude for funding received under the postdoctoral programs of Generalitat Valenciana/European Social Fund [APOSTD/2019/101] and grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by ¿European Union NextGenerationEU/PRTR¿. The help and support provided by Ayman El-Fouly (Applied Science International) for performing simulations in ELS is also gratefully acknowledged. Finally, the authors are also grateful for the invaluable cooperation of the Levantina, Ingeniería y Construcción S.L. (LIC) company, and the contribution of members and collaborators of the Building Resilient research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A simplified approach for modelling failure propagation of steel structures

  • Marin, Lorenzo|||0000-0002-7117-1291
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Assessing the likelihood of progressive collapse in buildings resulting from the local failure of individual structural elements is challenging, especially in steel buildings. Engineers invest significant effort in modelling various connections between structural members, requiring detailed 3D solid elements. The complexity and computation time increase exponentially when analysing an entire building instead of local subassemblies. This study presents a practical methodology for modelling steel structures to predict progressive collapse rapidly. It adopts the distributed plastic hinges approach and is able to accurately simulate large deformations expected in collapse scenarios. Suitable experimental tests were selected to validate the proposed methodology, revealing the sensitivity of predictions to modelling assumptions such as the positioning of the hinges, the plastic length of each hinge, the cross-section discretisation, and the material definition. Finally, a set of recommendations for the simplified modelling of steel structures is provided for practising engineers working in the progressive collapse domain., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant Agreement No. 101000396).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Large-Scale Tests on RC Purpose-Built Buildings for Improving Robustness

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[EN] Although recent years have been marked by a substantial research effort on the progressive collapse of steel as well as cast-in-place and precast concrete structures, the fact is that almost all studies are focused on reduced-scale tests, tests on isolated frame structures, tests on substructures or analytical and numerical analysis. Within this context, large-scale tests avoid size effects and allow all resisting mechanisms that a structure can develop after an initial-local failure to be studied. This paper presents the case of large-scale tests performed on two purpose-built buildings: one made of cast-in-place concrete and the other with precast concrete elements. In both cases, sudden column removal scenarios were considered for the robustness assessment of the structural system. The structures were provided with simple solutions to enhance the robustness and arrest progressive collapse initiated by the sudden failure of a column. The cast-in-place concrete building had two 3 m high floors, with 2 × 2 bays of 5 m span length. The total in-plan dimensions of the building were 10 × 10 m2. This building was subjected to sudden corner column failure scenarios with and without the presence of infill masonry walls. The precast concrete structure also had two 3 m high floors, with 3 × 2 bays of 5 m and 6 m span, respectively. The total in-plan dimensions of the building were 15 × 12 m2. This building was subjected to sudden column failure scenarios for three different tests, involving the removal of: a corner column, an edge column in a frame parallel to the direction of one-way hollow-core slabs, and an edge column in a frame perpendicular to the one-way slabs. This paper presents and discusses a summary of the results and outcomes of these studies., The work for the cast-in-place concrete building was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The work for the precast concrete building was carried out with the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. This research also serves as the basis of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude to the Levantina, Ingeniería y Construcción S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101], grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGeneration EU/PRTR, and Universitat Politècnica de València [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Natural fuse-segmentation to arrest failure propagation in precast concrete buildings

  • Adam, Jose M|||0000-0002-9205-8458
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Caredda, Giacomo|||0000-0002-6888-0409
  • Marin, Lorenzo|||0000-0002-7117-1291
  • Cetina-Berdugo, Diego Fernando|||0009-0008-2884-9694
  • Gerbaudo, Maria Luz|||0009-0003-2838-0316
  • Oliver-Cano, Marina
  • Tasquer-Val, Daniel
  • Sempertegui, Geovanny
[EN] Our previous work on precast construction has shown that sufficient structural robustness can be achieved by adequately designing the connection detailing to withstand a sudden column removal under the accidental load scenario. However, the behaviour of such a system under larger initial failure has not been investigated to date. This article presents one of the recent tests carried out by the Building Resilient research group of the Universitat Politècnica de València, where a full-scale precast building of 2 storeys (6 m) and 3 x 2 spans (15 x 12 m2) has been tested under removal of three columns. Preliminary computational simulations were performed using the applied element method (AEM) to design the load scenarios. The test results indicated that the precast system has a natural segmentation ability, which is beneficial to arrest the failure propagation, limiting the collapse extent to a minimum., This article is written as a part of a research project (Endure) funded by the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral program IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the ¿European Union NextGenerationEU/PRTR¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Improving building robustness through fuse-segmentation

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] As the impacts of climate change and emerging conflicts become more and more apparent, it is undeniable that more robust building structures are required for resilient societies to be able to thrive. In fact, there has been a growing research effort over the past few decades on structural robustness and progressive collapse. As a result, several building codes now include specific provisions for improving the progressive collapse resistance of building structures. At present, almost all methods for improving structural robustness included in relevant codes rely on providing extensive continuity within a structural system to ensure that alternative load paths are available to redistribute loads supported by a structural component after its failure. Although this approach has proven to be effective in many cases, certain situations do exist for which it may increase the risk of disproportionate collapse. These include, for example, cases of large initial failure or of buildings with wide spans between columns. In such situations, the remaining parts of a structural system may not be able to find a stable state of equilibrium after initial failure. Having extensive continuity can contribute to the collapsing part pulling down the rest of the structure. A possible approach for arresting failure propagation in these situations involves segmenting building structures. In fact, there exist several examples of real occurrences when the extent of a collapse was limited thanks to a building being segmented into different parts. This includes the partial collapse of the Pentagon (Washington, 2001) and of the terminal 2E building at Charles de Gaulle airport (Paris, 2004). Although segmentation was not necessarily introduced in building design for improving robustness in these cases, they do demonstrate its effectiveness in limiting the extent of progressive collapse. However, segmentation with weak borders does interrupt continuity, which has already proven its efficiency for redistributing loads in the case of small initial failures. To overcome this limitation, there exists the possibility of using structural fuses to connect different segments of a structure. Such fuses should be able to provide continuity for normal and accidental design situations considered by current building codes but would separate building segments when failure propagation is inevitable. In fact, a novel fuse-based segmentation design approach to limit the propagation of failures in building structures is currently being developed by the Endure project thanks to a grant of €2.5 million awarded by the European Research Council. This paper presents the framework being used within this project to i) develop a performance-based approach for the design of fuse-segmented buildings, ii) design and test structural fuses for selected building types, and iii) implement and validate the performance of structural fuses in full-scale buildings., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for the postdoctoral Grant IJC2020- 042642-I funded by MCIN/AEI/10.13039/501100011033 and by the ¿European Union NextGenerationEU/PRTR¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Natural fuse-segmentation to arrest failure propagation in precast concrete buildings

  • Adam, Jose M|||0000-0002-9205-8458
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Caredda, Giacomo|||0000-0002-6888-0409
  • Marin, Lorenzo|||0000-0002-7117-1291
  • Cetina-Berdugo, Diego Fernando|||0009-0008-2884-9694
  • Gerbaudo, Maria Luz|||0009-0003-2838-0316
  • Oliver-Cano, Marina
  • Sempertegui, Geovanny
[EN] The use of precast concrete structures is rapidly increasing worldwide because of their advantages in terms of quality, safety, sustainability, and speed of construction. In the field of progressive collapse of structures, few experimental studies have been carried out to investigate its structural integrity or robustness when subjected to a local initial failure. Previous work by the authors has shown that sufficient structural robustness can be achieved by properly designing the connection detailing between the structural components to withstand a sudden column removal under the accidental load combination defined in the codes. However, some aspects remain open for scientific discussions, such as: ¿What would happen if the initial failures were not limited to the failure of a single column?¿. In such a scenario (multiple column removals or other large initial disturbances), it has been shown that the probability of local collapse propagating to the rest of the structure is significantly higher. This article presents one of the recent tests carried out by the Building Resilient research group of the Universitat Politècnica de València, where a full-scale precast building of 2 storeys (6m) and 3 x 2 spans (15 x 12 m2) has been tested under removal of three columns. The results indicate that the way in which the detailing was provided to the precast elements allowed the system to arrest the failure propagation and limit the collapse extent to a minimum. It can be argued that precast concrete structures naturally have fused connections that take advantage of continuity for small initial failures yet automatically segment the building into individual parts when failure propagation is inevitable., This article is written as part of a research project (Endure) funded by the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral program IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the ¿European Union NextGenerationEU/PRTR¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Simplified Modelling Strategy For Evaluating Failure Propagation In Reinforced Concrete Structures

  • Cetina-Berdugo, Diego Fernando|||0009-0008-2884-9694
  • Setiawan, Andri
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The progressive collapse of reinforced concrete (RC) structures involves a series of complex loadresisting mechanisms, including flexural, arching and catenary actions, among others. A detailed model comprised of 3D-solid elements with refined mesh and complex material models is typically adopted to accurately simulate these phenomena in new or existing buildings. However, this approach is computationally expensive and unsuitable for practical applications, especially when dealing with large models of real buildings. This study proposes practical modelling strategies that balance the accuracy of an RC structural response to an initial failure with a practical method of preparing and analysing the models. The proposed modelling approaches include a) the PMM¿lumped hinge (based on the FEMA- 356 guideline), b) a modification to the FEMA hinge, and c) the fibre¿distributed hinge. Several progressive collapse tests from the literature were simulated on RC subassemblies with various boundary conditions and loading scenarios from the literature to systematically validate and compare the different approaches. The results revealed that the PMM-lumped approach cannot accurately simulate the structure¿s response under large deformation mode (catenary) where plastic hinges (yielding of reinforcement) are typically formed at a more extended region along the member. The present study suggests that the fibre-distributed hinge is the most suitable approach for simulating the progressive collapse of structures. This finding is pertinent (yet also alarming) as some new studies in the progressive collapse field still adopt the traditional PMM-hinge approach, which may eventually lead to invalid conclusions., This article is written as part of the Endure Research Project funded by the European Research Council (ERC) under the European Union¿s Horizon 2020 Research and Innovation Programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral program IJC2020-042642-I, funded by MCIN/AEI/10.13039/501100011033 and the ¿European Union NextGenerationEU/PRTR¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Limitations of Current Robustness Standards in Steel-Composite Buildings

  • Marin, Lorenzo|||0000-0002-7117-1291
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Current design standards emphasize structural continuity to achieve resilient, safe, efficient and durable building structures. Incidents such as the collapse of the Plasco Building (2017, Iran) and the partial collapse of the Ministry of Foreign Affairs Building (2024, New Zealand) highlight how extraordinary events can cause failure of a steel-composite building, making it unsafe. Var-ious methods aim to enhance the robustness of steel structures against ex-treme events or local-initial failures. Prescriptive tying rules improve continui-ty by introducing a minimum number of continuous ties. The alternative load path method explicitly verifies load redistribution after an initial component failure. These methods rely on structural continuity to manage load redistri-bution and maintain stability after small initial failures. However, in larger failure scenarios, they can contribute to complete collapse. This study exam-ines a steel-composite building (7x3-bays, 10-meter spans, three sto-reys) designed by Eurocodes for common loads, wind, seismic and accidental actions. The goal is to assess the limitations of continuity-based methods and the risk of propagating an initial failure. Results aim to inform future stand-ards to improve designs and mitigate major structural failures., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (Grant Agreement No. 101000396).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A risk-based framework for enhancing the robustness of framed building structures through segmentation

  • Caredda, Giacomo|||0000-0002-6888-0409
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
  • Chryssanthopoulos, Marios
[EN] Ensuring suitable robustness and resilience in building construction is a major priority for contemporary society. The study of past structural collapses resulting in disastrous consequences has revealed shortcomings in current robustness regulations. Particularly in cases of large initial damage, the widespread practice of ensuring extensive continuity may prove counterproductive, contributing to the propagation of failures rather than limiting their extent. This research presents the principles of an innovative design approach aimed at arresting the propagation of structural collapse through the segmentation of buildings. A performance-based framework is here proposed to guide designers in preventive structural planning for improved resilience. A cost-benefit analysis, a key tool to quantify the benefit of this philosophy , is introduced in order to support design decisions in accordance with required performance objectives., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (Grant Agree- ment No. 101000396).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Enhancing Building Robustness Through a Novel Risk-Based Segmentation Strategy: A Case Study

  • Caredda, Giacomo|||0000-0002-6888-0409
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
  • Chryssanthopoulos, Marios
[EN] The disproportionate collapse of building structures is a matter of growing concern. Current design strategies have been shown to have limitations in ensuring adequate robustness when dealing with large initial failures, which can impact the structural safety. This research has developed a novel risk-based strategy to enhance building robustness through segmentation. The proposed methodology involves the identification of an optimal segmentation configuration, with this being based on structural and geometric criteria. Following this, a cost-benefit analysis is developed to evaluate the efficiency of the proposed solution. To illustrate the application of the proposed strategy, a case study has been identified in which the segmentation strategy is applied, and the cost-effectiveness of the identified solution is evaluated., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors also acknowledge funding received from the Generalitat Valenciana for the Evolve project (ref. CIGE/2023/199).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Partial collapse tests of a precast concrete building specimen

  • Setiawan, Andri
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The paper describes a new design approach, so-called hierarchy-based collapse isolation, to arrest fail-ure propagation in buildings. The approach ensures that buildings have sufficient resistance to withstand loads under operational conditions and small initial failures. Yet, some connector elements are deliber-ately designed to break to isolate the collapse when failure propagation is inevitable. To validate the proposed concept, a two-storey purpose-built precast building specimen with 12 m × 15 m plan dimen-sions was tested and the main findings are discussed here. The work is expected to promote the wider adoption of robust precast systems, contributing to more resilient and sustainable buildings., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral programs of the Generalitat Valenciana/Fons Social Europeu [CIAPOS/2023/216] and for the Evolve project (ref. CIGE/2023/199).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Incorporación de una nueva última línea de defensa frente a colapsos progresivos en estructuras de hormigón prefabricadas, Incorporating a new last line of defence against progressive collapse in precast concrete structures

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The paper describes a new design approach, so-called hierarchy-based collapse isolation, to arrest failure propagation in buildings. The approach ensures that buildings have sufficient resistance to withstand loads under operational conditions and small initial failures. Yet, some connector elements are deliberately designed to break to isolate the collapse when failure propagation is inevitable. To validate the proposed concept, a two-storey purpose-built precast building specimen with 12 m × 15 m plan dimensions was tested and the main findings are discussed here. The work is expected to promote the wider adoption of robust precast systems, contributing to more resilient and sustainable buildings., Este artículo forma parte de un proyecto (Endure) que ha recibido financiación del Consejo Europeo de Investigación (ERC) en el marco del programa de investigación e innovación Horizonte 2020 de la Unión Europea (Grant agreement No. 101000396). Los autores también desean expresar su agradecimiento por la financiación recibida en el marco de los programas postdoctorales IJC2020-042642-I financiada por MCIN/AEI/10.13039/501100011033 y por la «NextGenerationEU/PRTR» de la Unión Europea, de la Generalitat Valenciana/Fons Social Europeu [CIAPOS/2023/216] y del proyecto Evolve (ref. CIGE/2023/199).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

On the Effectiveness of Fuse-Based Segmentation for Improving the Robustness of Buildings

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Caredda, Giacomo|||0000-0002-6888-0409
  • Setiawan, Andri
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] There has been a considerable research effort over the past few decades on better understanding and avoiding the progressive collapse of building structures. As a result, current building codes now include provisions to prevent the occurrence of this phenomenon. Most of these measures rely on providing extensive continuity so that alternative load paths are available to redistribute loads after the initial failure of a component. This form of load redistribution can be an effective way of preventing collapse initiation after the failure of single columns. However, after larger initial failures, continuity can promote rather than prevent failure propagation by enabling collapsing parts to pull down parts of the structure that would otherwise be unaffected. In such situations, dividing the structure into different segments can be a more effective way of isolating an initial failure and preventing its propagation. Nevertheless, implementing a segmentation design strategy that completely interrupts continuity would entail reducing safety under operational conditions and after small initial failures. To overcome these limitations, a fuse-based segmentation design approach can be used to combine the advantages of both continuity and segmentation. Using this approach, buildings are not only designed to have sufficient connectivity to prevent collapse after small initial failures, but they are also designed to segment and isolate collapse after large initial failures. Although it has recently been demonstrated that it is possible to design buildings that perform as intended by the fuse-based segmentation approach, it is still not well understood when the approach can be advantageous. As such, this work makes use of collapse simulations based on the Applied Element Method (AEM) to identify initial failure scenarios in which continuity can contribute to more disproportionate collapse for a specific case study involving a reinforced concrete framed building structure., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors also acknowledge funding received from the Generalitat Valenciana for the Evolve project (ref. CIGE/2023/199).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Colapso progresivo y robustez de edificios y puentes, Progressive collapse and robustness of buildings and bridges

  • Adam, Jose M|||0000-0002-9205-8458
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
[ES] Los últimos años han estado marcados por un número cada vez más elevado de estudios sobre el colapso progresivo y la robustez estructural como consecuencia de la persistente aparición y aparentemente creciente frecuencia de fallos estructurales catastróficos. En la actualidad, la gran mayoría de estos estudios se centran en simulaciones computacionales y en pruebas de laboratorio de subestructuras a escala reducida. Aunque esta filosofía de estudio ha permitido avanzar sustancialmente en la materia, estas estrategias se caracterizan por sus importantes limitaciones, que sólo pueden superarse mediante ensayos a escala real de las estructuras. Este artículo presenta algunos de los principales trabajos de investigación realizados en este sentido por el grupo de investigación Building Resilient del instituto ICITECH de la Universitat Politècnica de València. Se presentan los trabajos más importantes relacionados con el cimbrado de edificios, las estructuras de edificios de hormigón armado ejecutadas in situ y prefabricadas, los puentes metálicos en celosía y los edificios segmentados por fusibles, junto con los resultados más significativos obtenidos hasta el momento., Estos trabajos no hubieran dado sus frutos sin la financiación y ayuda recibidas por: FGV (Ferrocarrils de la Generalitat Valenciana), Calsens, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Ministerio de Educación y Formación Profesional, Fundación BBVA, European Research Council, LIC Levantina, Ingeniería y Construcción, y Encofrados Alsina.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Framework for Improving Building Robustness Through Segmentation

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The protection of buildings and infrastructures from extreme abnormal events due to natural hazards (e.g. hurricanes, floods), accidents (e.g. vehicle impact, gas explosions, unexpected failure due to poor design or lack of maintenance) and malicious actions (e.g. terrorist attacks), is currently of great societal and scientific concern. To prevent the spreading of a local-initial damage into progressive collapse, the current design philosophies consider that when a critical element fails (e.g. column, load-bearing wall), continuity structural details should provide alternative load paths to redistribute the load of the failed element to the rest of the structure. Although this strategy is valid in certain situations (e.g. small initial failure), in others (e.g. large initial failure due to blast loading), it has proved to be mistaken and has led to disastrous consequences. Over recent years, a debate has emerged about whether or not segmentation can improve a building¿s capacity to arrest progressive collapse. Segmenting a building into individual parts can prevent failures in one zone from propagating to other parts of the structure, as was the case, for example, in the Pentagon (2001) and Terminal 3 of the Charles de Gaulle Airport (2004). However, segmentation breaks continuity, which works well for small initial failure scenarios. In the context of an ERC-Consolidator Grant project, the use of structural fuses has been proposed. While fuses will provide continuity under normal loads or for small local-initial failures currently considered by relevant standards, they will separate to prevent disproportionate collapse during more extreme situations when failure propagation is inevitable. This paper presents the first achievements of the project, involving the development of a framework that can be employed to identify situations when continuity is disadvantageous and for which segmentation is beneficial., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral Grant IJC2020¿042642- I funded by MCIN/AEI/ https://doi.org/10.13039/501100011033 and by the ¿European Union NextGenerationEU/PRTR¿.