Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Synthesis and optimization of bio-based phase change materials from industrial non-edible chicken fat waste

  • Font-Prieur, Daylen Y.
  • Escribà i Gelonch, Marc
  • Nahad, Mahya Nikoo
  • López Bastida, Eduardo Julio
  • Cabeza, Luisa F.
Fatty acids are promising candidates as phase change materials (PCMs) for thermal energy storage; however, the influence of animal fat composition on their performance is not yet fully understood. In this study, non-edible chicken fats were evaluated as a fatty acid-based PCM source. The synthesis process was optimized using a Box-Behnken design based on response surface methodology, considering yield as the response variable. By including temperature, reaction time, NaOH concentration, and the acidifying agent as predictive factors, the model achieved a high level of accuracy in yield prediction (R² = 0.944), with all factors being statistically significant (p < 0.05). The highest yields were achieved at high temperatures (120 ºC) and longer reaction times, with oxalic acid standing out as an effective alternative to sulfuric acid., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement THUMBS UP (101096921). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Artificial intelligence-based prediction of state of charge in latent thermal energy storage systems

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Bastida, Hector
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
Accurate state of charge (SoC) estimation in latent thermal energy storage (TES) systems is essential for efficient renewable energy integration. Traditional physics-based methods, while precise, are computationally heavy and unsuitable for real-time control. This study proposes an artificial intelligence-based framework using a hybrid ensemble of advanced machine learning models, optimized through grid search. The model was trained on 605 simulated charging/discharging profiles from a validated physics-based model, covering realistic operating ranges. The ensemble model achieved high accuracy and reduced computational cost by 80%, enabling inference in 2.6 ms per sample. This advancement transforms SoC estimation into a real-time solution for industrial control systems, overcoming limitations of traditional approaches., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement CO-COOL (101007976). This project was also funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Preliminary characterization of a sorption TES to enhance flexible exploitation of renewables in buildings

  • Calò, Matteo
  • Mittelbach, Walter
  • Fotia, Antonio
  • Brancato, Vincenza
  • Frazzica, Andrea
A novel sorption TES was developed, using a composite sorbent as active storage material and water as working fluid. The prototype is equipped with a power-to-heat converter to store the excess of renewable energy in the form of thermochemical energy, to provide both heating and cooling to a building. Once manufactured, the prototype was preliminarily characterized in the lab to analyze the performance. An overall stored energy of 21.4 kWh was achieve, using very low charging temperatures, i.e. 70 °C. The system is able to deliver continuous heating power of 2.7 kW while discharging with a round trip efficiency of 0.86. The performance will be further assessed during the demonstration campaign that will take place in a residential building in Valladolid, Spain, in the coming year., This project has received funding from the European Union’s Horizon Europe research and innovation programme under grant agreement No 101096921 (ThumbsUp).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Impact of Synthesis Methods on the Long-Term Performance of Calcium Chloride-Impregnated Silica Gel for Thermochemical Storage

  • Mastronardo, Emanuela
  • Palamara, Davide
  • Fotia, Antonio
  • Brancato, Vincenza
  • Frazzica, Andrea
  • Milone, Candida
  • Calabrese, Luigi
This study evaluates silica gel/calcium chloride composites for thermochemical energy storage. Comparing three impregnation techniques (Dry, Wet, and Airbrush) results show the Airbrush method provides superior durability, with only 4.0% degradation after 6,000 cycles. While the DRY method experienced higher degradation (10.7%), it remains a viable, scalable option., This project has funded from ThumbsUp (Thermal energy storage solUtions to optimally Manage BuildingS and Unlock their grid balancing and flexibility Potential). ThumbsUP is a Horizon Europe Project supported by the European Commission under contract No. 101096921.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Impact of Synthesis Methods on the Long-Term Performance of Calcium Chloride-Impregnated Silica Gel for Thermochemical Storage

  • Mastronardo, Emanuela
  • Palamara, Davide
  • Fotia, Antonio
  • Brancato, Vincenza
  • Frazzica, Andrea
  • Milone, Candida
  • Calabrese, Luigi
This study evaluates silica gel/calcium chloride composites for thermochemical energy storage. Comparing three impregnation techniques (Dry, Wet, and Airbrush) results show the Airbrush method provides superior durability, with only 4.0% degradation after 6,000 cycles. While the DRY method experienced higher degradation (10.7%), it remains a viable, scalable option., This project has funded from ThumbsUp (Thermal energy storage solUtions to optimally Manage BuildingS and Unlock their grid balancing and flexibility Potential). ThumbsUP is a Horizon Europe Project supported by the European Commission under contract No. 101096921.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Artificial intelligence-based prediction of state of charge in latent thermal energy storage systems

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Bastida, Hector
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
Accurate state of charge (SoC) estimation in latent thermal energy storage (TES) systems is essential for efficient renewable energy integration. Traditional physics-based methods, while precise, are computationally heavy and unsuitable for real-time control. This study proposes an artificial intelligence-based framework using a hybrid ensemble of advanced machine learning models, optimized through grid search. The model was trained on 605 simulated charging/discharging profiles from a validated physics-based model, covering realistic operating ranges. The ensemble model achieved high accuracy and reduced computational cost by 80%, enabling inference in 2.6 ms per sample. This advancement transforms SoC estimation into a real-time solution for industrial control systems, overcoming limitations of traditional approaches., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement CO-COOL (101007976). This project was also funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Preliminary characterization of a sorption TES to enhance flexible exploitation of renewables in buildings

  • Calò, Matteo
  • Mittelbach, Walter
  • Fotia, Antonio
  • Brancato, Vincenza
  • Frazzica, Andrea
A novel sorption TES was developed, using a composite sorbent as active storage material and water as working fluid. The prototype is equipped with a power-to-heat converter to store the excess of renewable energy in the form of thermochemical energy, to provide both heating and cooling to a building. Once manufactured, the prototype was preliminarily characterized in the lab to analyze the performance. An overall stored energy of 21.4 kWh was achieve, using very low charging temperatures, i.e. 70 °C. The system is able to deliver continuous heating power of 2.7 kW while discharging with a round trip efficiency of 0.86. The performance will be further assessed during the demonstration campaign that will take place in a residential building in Valladolid, Spain, in the coming year., This project has received funding from the European Union’s Horizon Europe research and innovation programme under grant agreement No 101096921 (ThumbsUp).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Synthesis and optimization of bio-based phase change materials from industrial non-edible chicken fat waste

  • Font-Prieur, Daylen Y.
  • Escribà i Gelonch, Marc
  • Nahad, Mahya Nikoo
  • López Bastida, Eduardo Julio
  • Cabeza, Luisa F.
Fatty acids are promising candidates as phase change materials (PCMs) for thermal energy storage; however, the influence of animal fat composition on their performance is not yet fully understood. In this study, non-edible chicken fats were evaluated as a fatty acid-based PCM source. The synthesis process was optimized using a Box-Behnken design based on response surface methodology, considering yield as the response variable. By including temperature, reaction time, NaOH concentration, and the acidifying agent as predictive factors, the model achieved a high level of accuracy in yield prediction (R² = 0.944), with all factors being statistically significant (p < 0.05). The highest yields were achieved at high temperatures (120 ºC) and longer reaction times, with oxalic acid standing out as an effective alternative to sulfuric acid., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement THUMBS UP (101096921). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.