Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Predicting state of charge in latent thermal energy storage systems using artificial intelligence modelling techniques

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Bastida, Hector
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
Accurate state of charge (SoC) estimation in latent thermal energy storage (latent TES) systems is critical for optimizing renewable energy integration and ensuring efficient energy storage operation. Traditional physics-based methods, though accurate, were computationally intensive and required complex parameter calibration, limiting their applicability for real-time applications. This study introduced an artificial intelligence (AI) framework for real-time SoC estimation in shell-and-tube latent TES systems, integrating long short-term memory recurrent neural networks (LSTM-RNN) and extreme gradient boosting (XGBoost) through an optimised weighted ensemble (0.3 LSTM-RNN, 0.7 XGBoost), with weights determined using grid search. The framework was trained and validated on 605 charging and discharging profiles from a previously experimentally validated model, significantly expanding prior studies. The dataset covered a broad range of operating conditions, including charging (140–150 °C) and discharging (100–110 °C) cycles with mass flow rates between 0.8 and 1.2 kg/s. The ensemble model achieved superior accuracy (RMSE: 1.7%, MAE: 0.9%, R2 >99.7% for charging; RMSE: 1.4%, MAE: 0.8%, R2 >99.8% for discharging) compared to individual LSTM-RNN and XGBoost models, while reducing computational costs by 80%, enabling inference within 2.6 ms per sample. This significant reduction in computational requirements transforms SoC estimation from a computational bottleneck into an enabling technology for real-time control integration, allowing direct deployment in industrial control systems where traditional physics-based methods remain impractical due to their computational demands., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement COCOOL (101007976). This project was also funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This work was partially funded by the Ministerio de Ciencia e Innovacion ´ - Agencia Estatal de Investigacion ´ (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2024-153629-T). Professor A Sciacovelli also acknowledges the Novo Nordisk Foundation for the funding received (AI-LoDES, NNF25OC0100591)
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Artificial Intelligence Applied to Computational Fluid Dynamics and Its Application in Thermal Energy Storage: A Bibliometric Analysis

  • Rojas Cala, Edgar Felipe
  • Béjar Torres, Ramón
  • Mateu Piñol, Carles
  • Borri, Emiliano
  • Cabeza, Luisa F.
Computational fluid dynamics became an essential tool for analyzing complex fluid behavior, with applications ranging from aerospace engineering to renewable energy systems. Recent advancements in artificial intelligence further enhanced computational fluid dynamics capabilities, improving computational efficiency and predictive accuracy. However, despite its widespread adoption, the integration of artificial intelligence in computational fluid dynamics for thermal energy storage remained an underexplored research area. This study presented a bibliometric analysis of the existing literature on artificial intelligence applications in computational fluid dynamics, with a specific focus on thermal energy storage systems. By comparing two research domains-artificial intelligence in computational fluid dynamics and artificial intelligence in computational fluid dynamics applied to thermal energy storage-this paper identified a significant gap in the latter, as reflected in the low number of publications, limited collaboration networks, and weak citation relationships. While artificial intelligence-driven computational fluid dynamics research expanded across multiple disciplines, its application in thermal energy storage is still in its early stages, highlighting the need for further investigations. The results indicated a growing interest in artificial intelligence-enhanced computational fluid dynamics models for thermal energy storage optimization, particularly in areas such as heat transfer, phase change materials, and system efficiency improvements. The results also included an analysis of leading contributors to this field, along with emerging countries' contributions. A study of the key publication sources with a high impact in this domain was also included., Funding: This project was funded by the European Union’s Horizon 2020 research and innovation program under Grant No. 101007976 (CO-COOL). The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was also partially funded by the Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/FEDER, UE, -T, PID2022- 139835NB-C22—MCIN/AEI/10.13039/501100011033/FEDER, EU, and PID 2023-152814OB-100— MCIN/AEI/10.13039/501100011033/FECER, EU) and by Agencia Estatal de Investigación (MICIU/ AEI/10.13039/501100011033) (RED2024-153629-T). Acknowledgments: The authors would also like to thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified TECNIO agent in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia program. Edgar F. Rojas Cala is also grateful to “Convocatòria 2023 d’Ajuts UdL per la con-tractació de personal predoctoral en formació. Núm. expedient: 2023 UdL 12”. This paper is part of RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Experimental evaluation of different macro-encapsulation designs for PCM storages for cooling applications

  • Rehman, Omais Abdur
  • Palomba, Valeria
  • Vérez, David
  • Borri, Emiliano
  • Frazzica, Andrea
  • Brancato, Vincenza
  • Botargues, Teresa
  • Ure, Zafer
  • Cabeza, Luisa F.
Extensive research has been conducted on utilizing phase change materials for cooling applications, making it one of the most explored techniques in this domain. This research paper presents a comprehensive performance evaluation of a latent heat thermal energy storage unit featuring three distinct macro-encapsulation designs for phase change materials. The study aims to assess the thermal performance, efficiency, and practical applicability of these macro-encapsulation designs in a storage system. The PCM macro-encapsulation designs under investigation include cylindrical and rectangular shapes, each possessing different geometry. Two different configurations have been considered in this study. One configuration contains same PCM mass in order to have similar storage capacity while the other configuration has maximum PCM mass that can be inserted inside the tank. The used phase change material is a salt hydrate with melting temperature of 17 °C. The experimental setup consists of a controlled test rig that simulates real-world conditions and enables the comparative analysis of the three designs. Key performance parameters such as the charging and discharging time, temperature profiles, heat transfer rate, and energy storage/retrieval rates are measured and analysed. The results obtained from the experimental study provide valuable insights into the thermal behaviour, energy storage capacity, and overall effectiveness of the three macro-encapsulation designs. It is important to mention that use of an encapsulation design is highly dependent on application. The findings of this study contribute to the understanding of the impact of different macro-encapsulation designs on performance of thermal energy storage units. The results serve as a basis for optimizing macro-encapsulation designs, improving the efficiency and reliability of latent heat storage systems, and promoting their wider adoption in various energy management applications., This project was funded by the European Union's Horizon 2020 Research and Innovation Programme under No. 101007976 (CO-COOL). This work is partially supported by ICREA under the ICREA Academia programme. This work is also partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU and RED2022-134219-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Development of thermal storage as grid service for increasing renewables penetration (vídeo)

  • Rehman, Omais Abdur
• This research study will be carried out in the framework of CO-COOL project. • The aim is to develop low-carbon and storage integrated cooling technologies. • This study comprises of both simulation and experimental activities., El proyecto CO-COOL (GA 101007976) recibe financiación del programa de investigación e innovación Horizon 2020 de la Unión Europea. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Life cycle analysis for thermal energy storage systems

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Mani Kala, Saranprabhu
  • Escribà i Gelonch, Marc
Thermal energy storage systems help to reduce the environmental impact of heating in Europe. New, more efficient materials are being developed, as current materials lose performance with use. Life cycle assessment (LCA) needs to be applied to measure the energy required, the environmental impact and the cost of these new materials. The aim is to select the most environmentally friendly and efficient materials to move towards clean and sustainable heating in Europe., This project was funded by the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 101007976. This work was also partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-I00 – MCIN/AEI/10.13039/501100011033/FEDER, UE) and the Ministerio de Ciencia e Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2024-153629-T). This work is also partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to the research group (2021 SGR 01615). GREiA is a certified TECNIO agent in the category of technology developers of the Government of Catalonia. This project is also co-funded by the European Union’s research and innovation programme Horizon Europe under the project NitRecercat2425 (GA 101162003).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Development of thermal storage as grid service for increasing renewables penetration

  • Rehman, Omais Abdur
• This research study will be carried out in the framework of CO-COOL project. • The aim is to develop low-carbon and storage integrated cooling technologies. • This study comprises of both simulation and experimental activities., El proyecto CO-COOL (GA 101007976) recibe financiación del programa de investigación e innovación Horizon 2020 de la Unión Europea. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Analysis on integration of heat pumps and thermal energy storage in current energy system: From research outputs to energy policies

  • Rehman, Omais Abdur
  • Borri, Emiliano
  • Palomba, Valeria
  • Frazzica, Andrea
  • Brancato, Vincenza
  • Botargues, Teresa
  • Cabeza, Luisa F.
This paper presents a comprehensive examination of the integration of heat pumps and thermal energy storage (TES) within the current energy system. Utilizing bibliometric analysis, recent research trends and gaps are identified, shedding light on the evolving landscape of this dynamic field. The study delves into the research outputs since 1969, offering insights into the global scholarly contributions shaping the discourse. Furthermore, an extensive policy analysis is conducted, focusing on seven countries with the highest research output. The interplay between research advancements and energy policies is explored, providing an understanding of the practical implications of the integration of heat pumps and TES. An understanding is tried to reach as how research and policy sector influence each other. This analysis contributes not only to the academic understanding of the subject but also informs policymakers about potential pathways for enhancing energy efficiency and sustainability in heating and cooling sector., This project was funded by the European Union's Horizon 2020 Research and Innovation Programme under No. 101007976 (CO-COOL). This work is partially supported by ICREA under the ICREA Academia programme. This work is also partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU and RED2022-134219-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Artificial intelligence-based prediction of state of charge in latent thermal energy storage systems

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Bastida, Hector
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
Accurate state of charge (SoC) estimation in latent thermal energy storage (TES) systems is essential for efficient renewable energy integration. Traditional physics-based methods, while precise, are computationally heavy and unsuitable for real-time control. This study proposes an artificial intelligence-based framework using a hybrid ensemble of advanced machine learning models, optimized through grid search. The model was trained on 605 simulated charging/discharging profiles from a validated physics-based model, covering realistic operating ranges. The ensemble model achieved high accuracy and reduced computational cost by 80%, enabling inference in 2.6 ms per sample. This advancement transforms SoC estimation into a real-time solution for industrial control systems, overcoming limitations of traditional approaches., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement CO-COOL (101007976). This project was also funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Phase Change Slurries for Cooling and Storage: An Overview of Research Trends and Gaps

  • Borri, Emiliano
  • Hua, Nan
  • Sciacovelli, Adriano
  • Wu, Dawei
  • Ding, Yulong
  • Li, Yongliang
  • Brancato, Vincenza
  • Zhang, Yannan
  • Frazzica, Andrea
  • Li, Wenguang
  • Yu, Zhibin
  • Milian, Yanio
  • Ushak, Svetlana
  • Grageda, Mario
  • Cabeza, Luisa F.
Phase change slurries (PCSs) have great potential as both a heat transfer fluid and an energy storage medium for cooling processes, cold energy storage, and cold energy transportation due to desirable thermophysical properties. One of the major benefits of PCSs compared to pure phase change materials is their fluidity, thus making them cooled or heated by a heat exchanger, pumped through pipes, discharged, and stored directly in a thermal energy storage tank. The use of encapsulated phase change slurries and gas hydrate slurry has thus attracted considerable interest as reflected in the literature with a rising number of publications and institutions involved in the area. The use of bibliometric techniques has found a recent interest in the literature to define the progress of different scientific topics and inspire researchers to identify novelties. In this paper, bibliometric analysis and a detailed systematic review are carried out to show the state-of-the-art development of PCSs for cooling applications. Research gaps and hotspots are identified to help define future perspectives on this topic., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement CO-COOL (101007976). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31— MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. This work is partially supported by Agencia Nacional de Investigación y Desarollo, SERC-Chile Fondap 15110019 project.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CIES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Modeling of TES Tanks by Means of CFD Simulation Using Neural Networks

  • Rojas Cala, Edgar Felipe
  • Béjar Torres, Ramón
  • Mateu Piñol, Carles
  • Borri, Emiliano
  • Romagnoli, Alessandro
  • Cabeza, Luisa F.
Modeling of thermal energy storage (TES) tanks with computational fluid dynamics (CFD) tools exhibits limitations that hinder the time, scalability, and standardization of the procedure. In this study, an innovative technique is proposed to overcome the challenges in CFD modeling of TES tanks. This study assessed the feasibility of employing neural networks for TES tank modeling, evaluating the similarities in terms of structure and signal-to-noise ratio by comparing images generated by neural networks with those produced through CFD simulations. The results regarding the structural similarity index indicate that around 94% of the images obtained have a similarity index above 0.9. For the signal-to-noise ratio, the results indicate a mean value of 25 dB, which can be considered acceptable, although indicating room for improvement. Additional results show that our neural network model obtains the best performance when working with initial states close to the stable phase of the TES tank. The results obtained in this study are promising, laying the groundwork for a future pathway that could potentially replace the current methods used for TES tank modeling., This project was funded by the European Union’s Horizon 2020 Research and Innovation Programme under Grant No. 101007976 (CO-COOL). The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI)—NextGeneration EU (TED2021-129462B-I00—MCIN/AEI/10.13039/501100011033/ NextGenerationEU/PRTR). This work was also partially funded by the Ministerio de Ciencia e Innovación— Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/ FEDER, UE, RED2022-134219-T, PID2022-139835NB-C22—MCIN/AEI/10.13039/501100011033/FEDER, EU, and PID 2023-152814OB-100—MCIN/AEI/10.13039/501100011033/FECER, EU). This paper is part of RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (EIRES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CNIT 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Environmental performance of a multi-energy liquid air energy storage (LAES) system in cogeneration asset – A life cycle assessment-based comparison with lithium ion (Li-ion) battery

  • Tafone, Alessio
  • Borri, Emiliano
  • Cabeza, Luisa F.
  • Romagnoli, Alessandro
Increase in energy demand is shaping both developed and developing countries globally. As a result, the endeavour to reduce carbon emissions also encompasses electrical energy storage systems to ensure environmentally friendly power production and distribution. Currently, the scientific community is actively exploring and developing new storage technologies for this purpose. The focus of this work is to compare the eco-friendliness of a relatively novel technology such as liquid air energy storage (LAES) with an established storage solution such as Li-Ion battery (Li-ion). The comparison is carried out through Life Cycle Assessment (LCA) methodology which aims to assess the environmental impacts from each life stage, according to different impact categories. In particular, the study refers to the unitary storage and the delivery of electricity as well as cooling energy, considering all the inefficiencies and limits of each technology. The results show that in the full electric case study Li-ion battery environmentally outperform LAES due to (1) the higher round trip efficiency and (2) the significantly high environmental impact of the diathermic oil utilized by LAES, accounting for 92 % of the manufacture and disposal phase. Conversely, the cogeneration case study highlights that the “flexibility” and “dualism” of LAES, capable to efficiently deliver both electricity and cooling, offset the impact related to the higher electricity consumption during the use phase. Notably in energy mix frameworks with high share of primary energy source from fossil fuels, cogenerative LAES demonstrates superior environmental performance compared to Li-ion battery (i.e. 1302 kgCO2eq/MWhe vs 1140 kgCO2eq/MWhe for Singapore energy mix), attributable to its reduced electricity consumption., This project was funded by the European Union’s Horizon 2020 Research and Innovation Programme under No. 101007976 (COCOOL). This work is partially supported by ICREA under the ICREA Academia programme. This work is also partially funded by Ministerio de Ciencia e Innovacion´ —Agencia Estatal de Investigacion ´ (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, EU and RED2022-134219-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

The hidden use of lithium in thermal energy storage systems: a bibliometric study

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Zsembinszki, Gabriel
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T) Funding has also been received from European Union’s Horizon 2020 research and innovation programs under project CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental evaluation of different macro-encapsulation designs for PCM storages for cooling applications

  • Rehman, Omais Abdur
This research activity presents a comprehensive performance evaluation of a latent heat thermal energy storage unit featuring three distinct macro-encapsulation designs for phase change materials. The study aims to assess the thermal performance, efficiency, and practical applicability of these macro-encapsulation designs within an energy storage system., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31-MCIN/AEI/10.13039/501100011033/FEDER, UE) y por el Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2022-134219-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2021SGR01615). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos por el Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA en el marco del programa ICREA Academia. Cofinanciado por el programa de investigación e innovación Horizon Europe de la Unión Europea, en el marco del proyecto NitRecerCat (GA101061189)..
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Progress and prospects of cold thermal energy storage for liquid air energy storage systems - A critical review

  • Tafone, Alessio
  • Borri, Emiliano
  • Cabeza, Luisa F.
  • O'Callaghan, Odhran
  • Donnellan, Philip
  • Mashayekh, Afshin
  • Kothari, Rohit
  • Haglind, Fredrik
  • Li, Dacheng
  • Xu, Lejin
  • Ding, Yulong
  • Li, Yongliang
  • Yang, Lizhong
  • Romagnoli, Alessandro
  • Dzido, Aleksandra
  • Krawczyk, Piotr
Electrical energy storage plays a vital role in enabling renewable energy integration and achieving decarbonization targets under the Paris Agreement. Liquid air energy storage (LAES) is a promising large-scale, longduration storage technology due to its scalability, site flexibility, and high energy density. A crucial component of LAES performance is the cold thermal energy storage (CTES), which recovers cryogenic exergy during air regasification to recovery during the liquefaction phase, significantly improving the round trip efficiency. This paper presents a comprehensive and critical review of CTES technologies for LAES, aiming to identify optimal design approaches based on current literature and industrial practices. The review covers sensible and latent heat storage systems, hybrid and cascade configurations, and advanced geometries, assessed through thermodynamic and techno-economic performance indicators. Our analysis finds that packed beds with sensible heat materials are the most mature and cost-effective option, while phase change material-based systems offer higher efficiency potential-achieving round-trip efficiency improvements of up to 55 %-but face challenges in material cost, availability, and scalability. Hybrid and cascade configurations show promise in simulations, though experimental data remain limited. Cold storage losses are shown to impact round-trip efficiency up to seven times more than heat losses, highlighting the strategic importance of CTES optimization. The authors identify key research needs in dynamic system modeling, scalable material development, and lifecycle techno-economic assessment. Addressing these gaps will be critical to advancing CTES as a performance-enhancing and cost-effective component of next-generation LAES systems.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Formulation and development of composite materials for thermally driven and storage‑integrated cooling technologies: a review

  • Borri, Emiliano
  • Ushak, Svetlana
  • Li, Yongliang
  • Frazzica, Andrea
  • Zhang, Yannan
  • Milian, Yanio
  • Grageda, Mario
  • Li, Dacheng
  • Cabeza, Luisa F.
  • Brancato, Vincenza
The energy consumption for cooling takes up 50% of all the consumed final energy in Europe, which still highly depends on the utilization of fossil fuels. Thus, it is required to propose and develop new technologies for cooling driven by renewable energy. Also, thermal energy storage is an emerging technology to relocate intermittent low-grade heat source, like solar thermal energy and industrial waste heat as well as to exploit off-peak electricity, for cooling applications. This review aims to summarize the recent advances in thermally driven cooling and cold storage technologies, focusing on the formation and fabrication of adopted composites materials, including sorption materials, phase change materials, and slurries. Herein, first the classifications, selection criteria, and properties for these three types of materials is discussed. Then, the application potentials of all the materials are prospected in terms of economic analysis and sustainability., Acknowledgements The authors at University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certifed agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This project has received funding from ThumbsUp (Thermal energy storage solUtions to optimally Manage BuildingS and Unlock their grid balancing and fexibility Potential). ThumbsUP is a Horizon Europe Project supported by the European Commission under contract No. 101096921. Funding This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement CO-COOL (101007976). Authors acknowledge to ANID/ PUENTE No 1522A0006 and ANID/FONDECYT REGULAR No 1231721 projects. This work was partially funded by the Ministerio de Ciencia e Innovación de España [(PID2021-123511OB-C31— MCIU/AEI/FEDER, UE) (RED2022-134219-T)]. The authors at the University of Birmingham gratefully acknowledge the fnancial supports from the Engineering and Physical Sciences Research Council (EPSRC) of the UK (EP/T022701/1). Data availability Data is available und
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Artificial intelligence in state of charge estimation: Pioneering approaches across energy storage systems

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Bastida, Hector
  • Li, Yongliang
  • Ding, Yulong
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
This review investigates the role of artificial intelligence in predicting the state of charge for thermal energy storage devices. Traditional estimation methods often struggled with complex dynamics and large-scale data, showing accuracy limitations of 5–10 % under dynamic conditions. Artificial intelligence significantly improved accuracy, efficiency, and scalability, achieving 98 % prediction accuracy in electrical storage, a 30 % efficiency gain in thermal energy storage, a 77 % reduction in power fluctuations for mechanical storage, and a 40 % efficiency boost in chemical storage. The review analysed various artificial intelligence methodologies applied to thermal energy storage, including neural networks, support vector machines, reinforcement learning, and hybrid models, which reduced computational time by up to 60 %. Integrating artificial intelligence with the internet of things and big data enabled real-time analysis of thermal energy storage systems, reducing monitoring latency by 70 %. However, challenges persisted regarding data integrity, integration costs, and ethical concerns. The study also revealed implementation gaps within thermal storage technologies, with artificial intelligence adoption at 15 % in latent thermal energy storage compared to other energy systems like electrical storage where adoption reaches 85 %. Future research should focus on explainable artificial intelligence models, robust data quality frameworks, and standardized integration protocols, specifically tailored for the unique challenges of thermal energy storage including sensible, latent, and thermochemical systems. This review highlights the transformative impact of artificial intelligence on state of charge estimation in thermal energy storage systems, paving the way for more efficient and reliable energy management strategies., This work was funded by the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 101007976 (CO-COOL). This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2024-153629-T).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CIES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis on integration of heat pumps and thermal energy storage in current energy system: From research outputs to energy policies

  • Rehman, Omais Abdur
  • Borri, Emiliano
  • Palomba, Valeria
  • Frazzica, Andrea
  • Brancato, Vincenza
  • Botargues, Teresa
  • Cabeza, Luisa F.
This paper presents a comprehensive examination of the integration of heat pumps and thermal energy storage (TES) within the current energy system. Utilizing bibliometric analysis, recent research trends and gaps are identified, shedding light on the evolving landscape of this dynamic field. The study delves into the research outputs since 1969, offering insights into the global scholarly contributions shaping the discourse. Furthermore, an extensive policy analysis is conducted, focusing on seven countries with the highest research output. The interplay between research advancements and energy policies is explored, providing an understanding of the practical implications of the integration of heat pumps and TES. An understanding is tried to reach as how research and policy sector influence each other. This analysis contributes not only to the academic understanding of the subject but also informs policymakers about potential pathways for enhancing energy efficiency and sustainability in heating and cooling sector., This project was funded by the European Union's Horizon 2020 Research and Innovation Programme under No. 101007976 (CO-COOL). This work is partially supported by ICREA under the ICREA Academia programme. This work is also partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU and RED2022-134219-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Predicting state of charge in latent thermal energy storage systems using artificial intelligence modelling techniques

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Bastida, Hector
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
Accurate state of charge (SoC) estimation in latent thermal energy storage (latent TES) systems is critical for optimizing renewable energy integration and ensuring efficient energy storage operation. Traditional physics-based methods, though accurate, were computationally intensive and required complex parameter calibration, limiting their applicability for real-time applications. This study introduced an artificial intelligence (AI) framework for real-time SoC estimation in shell-and-tube latent TES systems, integrating long short-term memory recurrent neural networks (LSTM-RNN) and extreme gradient boosting (XGBoost) through an optimised weighted ensemble (0.3 LSTM-RNN, 0.7 XGBoost), with weights determined using grid search. The framework was trained and validated on 605 charging and discharging profiles from a previously experimentally validated model, significantly expanding prior studies. The dataset covered a broad range of operating conditions, including charging (140–150 °C) and discharging (100–110 °C) cycles with mass flow rates between 0.8 and 1.2 kg/s. The ensemble model achieved superior accuracy (RMSE: 1.7%, MAE: 0.9%, R2 >99.7% for charging; RMSE: 1.4%, MAE: 0.8%, R2 >99.8% for discharging) compared to individual LSTM-RNN and XGBoost models, while reducing computational costs by 80%, enabling inference within 2.6 ms per sample. This significant reduction in computational requirements transforms SoC estimation from a computational bottleneck into an enabling technology for real-time control integration, allowing direct deployment in industrial control systems where traditional physics-based methods remain impractical due to their computational demands., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement COCOOL (101007976). This project was also funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This work was partially funded by the Ministerio de Ciencia e Innovacion ´ - Agencia Estatal de Investigacion ´ (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2024-153629-T). Professor A Sciacovelli also acknowledges the Novo Nordisk Foundation for the funding received (AI-LoDES, NNF25OC0100591)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Development of thermal storage as grid service for increasing renewables penetration

  • Rehman, Omais Abdur
• This research study will be carried out in the framework of CO-COOL project. • The aim is to develop low-carbon and storage integrated cooling technologies. • This study comprises of both simulation and experimental activities., El proyecto CO-COOL (GA 101007976) recibe financiación del programa de investigación e innovación Horizon 2020 de la Unión Europea. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Artificial intelligence in state of charge estimation: Pioneering approaches across energy storage systems

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Bastida, Hector
  • Li, Yongliang
  • Ding, Yulong
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
This review investigates the role of artificial intelligence in predicting the state of charge for thermal energy storage devices. Traditional estimation methods often struggled with complex dynamics and large-scale data, showing accuracy limitations of 5–10 % under dynamic conditions. Artificial intelligence significantly improved accuracy, efficiency, and scalability, achieving 98 % prediction accuracy in electrical storage, a 30 % efficiency gain in thermal energy storage, a 77 % reduction in power fluctuations for mechanical storage, and a 40 % efficiency boost in chemical storage. The review analysed various artificial intelligence methodologies applied to thermal energy storage, including neural networks, support vector machines, reinforcement learning, and hybrid models, which reduced computational time by up to 60 %. Integrating artificial intelligence with the internet of things and big data enabled real-time analysis of thermal energy storage systems, reducing monitoring latency by 70 %. However, challenges persisted regarding data integrity, integration costs, and ethical concerns. The study also revealed implementation gaps within thermal storage technologies, with artificial intelligence adoption at 15 % in latent thermal energy storage compared to other energy systems like electrical storage where adoption reaches 85 %. Future research should focus on explainable artificial intelligence models, robust data quality frameworks, and standardized integration protocols, specifically tailored for the unique challenges of thermal energy storage including sensible, latent, and thermochemical systems. This review highlights the transformative impact of artificial intelligence on state of charge estimation in thermal energy storage systems, paving the way for more efficient and reliable energy management strategies., This work was funded by the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 101007976 (CO-COOL). This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2024-153629-T).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental evaluation of different macro-encapsulation designs for PCM storages for cooling applications

  • Rehman, Omais Abdur
  • Palomba, Valeria
  • Vérez, David
  • Borri, Emiliano
  • Frazzica, Andrea
  • Brancato, Vincenza
  • Botargues, Teresa
  • Ure, Zafer
  • Cabeza, Luisa F.
Extensive research has been conducted on utilizing phase change materials for cooling applications, making it one of the most explored techniques in this domain. This research paper presents a comprehensive performance evaluation of a latent heat thermal energy storage unit featuring three distinct macro-encapsulation designs for phase change materials. The study aims to assess the thermal performance, efficiency, and practical applicability of these macro-encapsulation designs in a storage system. The PCM macro-encapsulation designs under investigation include cylindrical and rectangular shapes, each possessing different geometry. Two different configurations have been considered in this study. One configuration contains same PCM mass in order to have similar storage capacity while the other configuration has maximum PCM mass that can be inserted inside the tank. The used phase change material is a salt hydrate with melting temperature of 17 °C. The experimental setup consists of a controlled test rig that simulates real-world conditions and enables the comparative analysis of the three designs. Key performance parameters such as the charging and discharging time, temperature profiles, heat transfer rate, and energy storage/retrieval rates are measured and analysed. The results obtained from the experimental study provide valuable insights into the thermal behaviour, energy storage capacity, and overall effectiveness of the three macro-encapsulation designs. It is important to mention that use of an encapsulation design is highly dependent on application. The findings of this study contribute to the understanding of the impact of different macro-encapsulation designs on performance of thermal energy storage units. The results serve as a basis for optimizing macro-encapsulation designs, improving the efficiency and reliability of latent heat storage systems, and promoting their wider adoption in various energy management applications., This project was funded by the European Union's Horizon 2020 Research and Innovation Programme under No. 101007976 (CO-COOL). This work is partially supported by ICREA under the ICREA Academia programme. This work is also partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU and RED2022-134219-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (EIRES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Development of thermal storage as grid service for increasing renewables penetration (vídeo)

  • Rehman, Omais Abdur
• This research study will be carried out in the framework of CO-COOL project. • The aim is to develop low-carbon and storage integrated cooling technologies. • This study comprises of both simulation and experimental activities., El proyecto CO-COOL (GA 101007976) recibe financiación del programa de investigación e innovación Horizon 2020 de la Unión Europea. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Environmental performance of a multi-energy liquid air energy storage (LAES) system in cogeneration asset – A life cycle assessment-based comparison with lithium ion (Li-ion) battery

  • Tafone, Alessio
  • Borri, Emiliano
  • Cabeza, Luisa F.
  • Romagnoli, Alessandro
Increase in energy demand is shaping both developed and developing countries globally. As a result, the endeavour to reduce carbon emissions also encompasses electrical energy storage systems to ensure environmentally friendly power production and distribution. Currently, the scientific community is actively exploring and developing new storage technologies for this purpose. The focus of this work is to compare the eco-friendliness of a relatively novel technology such as liquid air energy storage (LAES) with an established storage solution such as Li-Ion battery (Li-ion). The comparison is carried out through Life Cycle Assessment (LCA) methodology which aims to assess the environmental impacts from each life stage, according to different impact categories. In particular, the study refers to the unitary storage and the delivery of electricity as well as cooling energy, considering all the inefficiencies and limits of each technology. The results show that in the full electric case study Li-ion battery environmentally outperform LAES due to (1) the higher round trip efficiency and (2) the significantly high environmental impact of the diathermic oil utilized by LAES, accounting for 92 % of the manufacture and disposal phase. Conversely, the cogeneration case study highlights that the “flexibility” and “dualism” of LAES, capable to efficiently deliver both electricity and cooling, offset the impact related to the higher electricity consumption during the use phase. Notably in energy mix frameworks with high share of primary energy source from fossil fuels, cogenerative LAES demonstrates superior environmental performance compared to Li-ion battery (i.e. 1302 kgCO2eq/MWhe vs 1140 kgCO2eq/MWhe for Singapore energy mix), attributable to its reduced electricity consumption., This project was funded by the European Union’s Horizon 2020 Research and Innovation Programme under No. 101007976 (COCOOL). This work is partially supported by ICREA under the ICREA Academia programme. This work is also partially funded by Ministerio de Ciencia e Innovacion´ —Agencia Estatal de Investigacion ´ (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, EU and RED2022-134219-T). The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modeling of TES Tanks by Means of CFD Simulation Using Neural Networks

  • Rojas Cala, Edgar Felipe
  • Béjar Torres, Ramón
  • Mateu Piñol, Carles
  • Borri, Emiliano
  • Romagnoli, Alessandro
  • Cabeza, Luisa F.
Modeling of thermal energy storage (TES) tanks with computational fluid dynamics (CFD) tools exhibits limitations that hinder the time, scalability, and standardization of the procedure. In this study, an innovative technique is proposed to overcome the challenges in CFD modeling of TES tanks. This study assessed the feasibility of employing neural networks for TES tank modeling, evaluating the similarities in terms of structure and signal-to-noise ratio by comparing images generated by neural networks with those produced through CFD simulations. The results regarding the structural similarity index indicate that around 94% of the images obtained have a similarity index above 0.9. For the signal-to-noise ratio, the results indicate a mean value of 25 dB, which can be considered acceptable, although indicating room for improvement. Additional results show that our neural network model obtains the best performance when working with initial states close to the stable phase of the TES tank. The results obtained in this study are promising, laying the groundwork for a future pathway that could potentially replace the current methods used for TES tank modeling., This project was funded by the European Union’s Horizon 2020 Research and Innovation Programme under Grant No. 101007976 (CO-COOL). The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI)—NextGeneration EU (TED2021-129462B-I00—MCIN/AEI/10.13039/501100011033/ NextGenerationEU/PRTR). This work was also partially funded by the Ministerio de Ciencia e Innovación— Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/ FEDER, UE, RED2022-134219-T, PID2022-139835NB-C22—MCIN/AEI/10.13039/501100011033/FEDER, EU, and PID 2023-152814OB-100—MCIN/AEI/10.13039/501100011033/FECER, EU). This paper is part of RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental evaluation of different macro-encapsulation designs for PCM storages for cooling applications

  • Rehman, Omais Abdur
This research activity presents a comprehensive performance evaluation of a latent heat thermal energy storage unit featuring three distinct macro-encapsulation designs for phase change materials. The study aims to assess the thermal performance, efficiency, and practical applicability of these macro-encapsulation designs within an energy storage system., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31-MCIN/AEI/10.13039/501100011033/FEDER, UE) y por el Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2022-134219-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2021SGR01615). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos por el Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA en el marco del programa ICREA Academia. Cofinanciado por el programa de investigación e innovación Horizon Europe de la Unión Europea, en el marco del proyecto NitRecerCat (GA101061189)..
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Artificial intelligence-based prediction of state of charge in latent thermal energy storage systems

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Bastida, Hector
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
Accurate state of charge (SoC) estimation in latent thermal energy storage (TES) systems is essential for efficient renewable energy integration. Traditional physics-based methods, while precise, are computationally heavy and unsuitable for real-time control. This study proposes an artificial intelligence-based framework using a hybrid ensemble of advanced machine learning models, optimized through grid search. The model was trained on 605 simulated charging/discharging profiles from a validated physics-based model, covering realistic operating ranges. The ensemble model achieved high accuracy and reduced computational cost by 80%, enabling inference in 2.6 ms per sample. This advancement transforms SoC estimation into a real-time solution for industrial control systems, overcoming limitations of traditional approaches., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement CO-COOL (101007976). This project was also funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Formulation and development of composite materials for thermally driven and storage‑integrated cooling technologies: a review

  • Borri, Emiliano
  • Ushak, Svetlana
  • Li, Yongliang
  • Frazzica, Andrea
  • Zhang, Yannan
  • Milian, Yanio
  • Grageda, Mario
  • Li, Dacheng
  • Cabeza, Luisa F.
  • Brancato, Vincenza
The energy consumption for cooling takes up 50% of all the consumed final energy in Europe, which still highly depends on the utilization of fossil fuels. Thus, it is required to propose and develop new technologies for cooling driven by renewable energy. Also, thermal energy storage is an emerging technology to relocate intermittent low-grade heat source, like solar thermal energy and industrial waste heat as well as to exploit off-peak electricity, for cooling applications. This review aims to summarize the recent advances in thermally driven cooling and cold storage technologies, focusing on the formation and fabrication of adopted composites materials, including sorption materials, phase change materials, and slurries. Herein, first the classifications, selection criteria, and properties for these three types of materials is discussed. Then, the application potentials of all the materials are prospected in terms of economic analysis and sustainability., Acknowledgements The authors at University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certifed agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This project has received funding from ThumbsUp (Thermal energy storage solUtions to optimally Manage BuildingS and Unlock their grid balancing and fexibility Potential). ThumbsUP is a Horizon Europe Project supported by the European Commission under contract No. 101096921. Funding This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement CO-COOL (101007976). Authors acknowledge to ANID/ PUENTE No 1522A0006 and ANID/FONDECYT REGULAR No 1231721 projects. This work was partially funded by the Ministerio de Ciencia e Innovación de España [(PID2021-123511OB-C31— MCIU/AEI/FEDER, UE) (RED2022-134219-T)]. The authors at the University of Birmingham gratefully acknowledge the fnancial supports from the Engineering and Physical Sciences Research Council (EPSRC) of the UK (EP/T022701/1). Data availability Data is available und
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The hidden use of lithium in thermal energy storage systems: a bibliometric study

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Zsembinszki, Gabriel
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T) Funding has also been received from European Union’s Horizon 2020 research and innovation programs under project CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Progress and prospects of cold thermal energy storage for liquid air energy storage systems - A critical review

  • Tafone, Alessio
  • Borri, Emiliano
  • Cabeza, Luisa F.
  • O'Callaghan, Odhran
  • Donnellan, Philip
  • Mashayekh, Afshin
  • Kothari, Rohit
  • Haglind, Fredrik
  • Li, Dacheng
  • Xu, Lejin
  • Ding, Yulong
  • Li, Yongliang
  • Yang, Lizhong
  • Romagnoli, Alessandro
  • Dzido, Aleksandra
  • Krawczyk, Piotr
Electrical energy storage plays a vital role in enabling renewable energy integration and achieving decarbonization targets under the Paris Agreement. Liquid air energy storage (LAES) is a promising large-scale, longduration storage technology due to its scalability, site flexibility, and high energy density. A crucial component of LAES performance is the cold thermal energy storage (CTES), which recovers cryogenic exergy during air regasification to recovery during the liquefaction phase, significantly improving the round trip efficiency. This paper presents a comprehensive and critical review of CTES technologies for LAES, aiming to identify optimal design approaches based on current literature and industrial practices. The review covers sensible and latent heat storage systems, hybrid and cascade configurations, and advanced geometries, assessed through thermodynamic and techno-economic performance indicators. Our analysis finds that packed beds with sensible heat materials are the most mature and cost-effective option, while phase change material-based systems offer higher efficiency potential-achieving round-trip efficiency improvements of up to 55 %-but face challenges in material cost, availability, and scalability. Hybrid and cascade configurations show promise in simulations, though experimental data remain limited. Cold storage losses are shown to impact round-trip efficiency up to seven times more than heat losses, highlighting the strategic importance of CTES optimization. The authors identify key research needs in dynamic system modeling, scalable material development, and lifecycle techno-economic assessment. Addressing these gaps will be critical to advancing CTES as a performance-enhancing and cost-effective component of next-generation LAES systems.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CNIT 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Phase Change Slurries for Cooling and Storage: An Overview of Research Trends and Gaps

  • Borri, Emiliano
  • Hua, Nan
  • Sciacovelli, Adriano
  • Wu, Dawei
  • Ding, Yulong
  • Li, Yongliang
  • Brancato, Vincenza
  • Zhang, Yannan
  • Frazzica, Andrea
  • Li, Wenguang
  • Yu, Zhibin
  • Milian, Yanio
  • Ushak, Svetlana
  • Grageda, Mario
  • Cabeza, Luisa F.
Phase change slurries (PCSs) have great potential as both a heat transfer fluid and an energy storage medium for cooling processes, cold energy storage, and cold energy transportation due to desirable thermophysical properties. One of the major benefits of PCSs compared to pure phase change materials is their fluidity, thus making them cooled or heated by a heat exchanger, pumped through pipes, discharged, and stored directly in a thermal energy storage tank. The use of encapsulated phase change slurries and gas hydrate slurry has thus attracted considerable interest as reflected in the literature with a rising number of publications and institutions involved in the area. The use of bibliometric techniques has found a recent interest in the literature to define the progress of different scientific topics and inspire researchers to identify novelties. In this paper, bibliometric analysis and a detailed systematic review are carried out to show the state-of-the-art development of PCSs for cooling applications. Research gaps and hotspots are identified to help define future perspectives on this topic., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement CO-COOL (101007976). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31— MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. This work is partially supported by Agencia Nacional de Investigación y Desarollo, SERC-Chile Fondap 15110019 project.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Artificial Intelligence Applied to Computational Fluid Dynamics and Its Application in Thermal Energy Storage: A Bibliometric Analysis

  • Rojas Cala, Edgar Felipe
  • Béjar Torres, Ramón
  • Mateu Piñol, Carles
  • Borri, Emiliano
  • Cabeza, Luisa F.
Computational fluid dynamics became an essential tool for analyzing complex fluid behavior, with applications ranging from aerospace engineering to renewable energy systems. Recent advancements in artificial intelligence further enhanced computational fluid dynamics capabilities, improving computational efficiency and predictive accuracy. However, despite its widespread adoption, the integration of artificial intelligence in computational fluid dynamics for thermal energy storage remained an underexplored research area. This study presented a bibliometric analysis of the existing literature on artificial intelligence applications in computational fluid dynamics, with a specific focus on thermal energy storage systems. By comparing two research domains-artificial intelligence in computational fluid dynamics and artificial intelligence in computational fluid dynamics applied to thermal energy storage-this paper identified a significant gap in the latter, as reflected in the low number of publications, limited collaboration networks, and weak citation relationships. While artificial intelligence-driven computational fluid dynamics research expanded across multiple disciplines, its application in thermal energy storage is still in its early stages, highlighting the need for further investigations. The results indicated a growing interest in artificial intelligence-enhanced computational fluid dynamics models for thermal energy storage optimization, particularly in areas such as heat transfer, phase change materials, and system efficiency improvements. The results also included an analysis of leading contributors to this field, along with emerging countries' contributions. A study of the key publication sources with a high impact in this domain was also included., Funding: This project was funded by the European Union’s Horizon 2020 research and innovation program under Grant No. 101007976 (CO-COOL). The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was also partially funded by the Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/FEDER, UE, -T, PID2022- 139835NB-C22—MCIN/AEI/10.13039/501100011033/FEDER, EU, and PID 2023-152814OB-100— MCIN/AEI/10.13039/501100011033/FECER, EU) and by Agencia Estatal de Investigación (MICIU/ AEI/10.13039/501100011033) (RED2024-153629-T). Acknowledgments: The authors would also like to thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified TECNIO agent in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia program. Edgar F. Rojas Cala is also grateful to “Convocatòria 2023 d’Ajuts UdL per la con-tractació de personal predoctoral en formació. Núm. expedient: 2023 UdL 12”. This paper is part of RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+.