Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 72
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Selection of the appropriate phase change material for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Fernández, Ángel G.
  • Cabeza, Luisa F.
The implementation of thermal energy storage systems using phase change materials to support the integration of renewable energies is a key element that allows reducing the energy consumption in buildings by increasing self-consumption and system efficiency. The selection of the most suitable phase change material is an important part of the successful implementation of the thermal energy storage system. The aim of this paper is to present the methodology used to assess the suitability of potential phase change materials to be used in two innovative energy storage systems, one of them being mainly intended to provide cooling, while the other provides heating and domestic hot water to residential buildings. The selection methodology relies on a qualitative decision matrix, which uses some common features of phase change materials to assign an overall score to each material that should allow comparing the different options. Experimental characterization of the best candidates was also performed to help in making a final decision. The results indicate some of the most suitable candidates for both systems, with RT4 being the most promising commercial phase change material for the system designed to provide cooling, while for the system designed to provide heating and domestic hot water, the most promising candidate is RT64HC, another commercial product., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of a novel three-fluids heat exchanger embedded with phase change materials for cooling applications

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Phase change material selection for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Gasia, Jaume
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Within the framework of HYBUILD, an EU Horizon 2020-funded project, two innovative compact hybrid electrical/thermal storage systems for stand-alone and district connected residential buildings will be developed and tested in three demos located in Spain, France, and Cyprus. One of the innovative systems is aimed to be placed in buildings located in Mediterranean climate regions, where cooling loads are dominant, while the other system is intended for Continental climate regions, where the heating demand is dominant. Each system will include, among others components such as a sorption storage system and domestic hot water tanks, a latent thermal energy storage (LTES) system that will be connected to a heat pump through an innovative heat exchanger made of aluminium and filled with phase change material (PCM). In both cases, the heat pump works with electricity provided by a photovoltaic system that is, at the same time, connected to an electrical storage battery. The aim of using the LTES system is to enhance the use of solar energy, which will be translated into a reduction of the building energy consumption and related costs. This study focuses on the selection of the most suitable PCM to be used in each system. On the one hand, the LTES system of the Mediterranean system will be used to store cold to reduce the cooling demand. Taking into account that, according to the design parameters, the heat pump will require a refrigerant evaporation temperature around 2 ºC, and the building cooling system will require water supply in the range from 7 ºC to 12 ºC, the PCM melting temperature range should be within 0 ºC and 7 ºC. On the other hand, the LTES system of the Continental system will be used to store heat to reduce the domestic hot water (DHW) demand. The LTES will be located at the compressor outlet and will be charged by the hot refrigerant that exits the compressor at temperatures as high as 120 ºC. During the discharge process, the heat stored in the LTES will be supplied to the DHW at a temperature in the range between 50 ºC to 55 ºC. As a consequence, the range for the PCM melting temperature investigated in this case should be between 62 ºC and 68 ºC. Besides the melting temperature, other selection criteria considered include the PCM melting enthalpy and melting range, maximum allowed working temperature, density, thermal conductivity, availability, cost, and compatibility with aluminium. To decide the ideal PCM candidate for each system, a decision matrix was defined and used, by applying a weighted score to the selection criteria items according to their importance. The preliminary results indicate that for the Mediterranean system the best candidate is the commercial savE OM3 PCM, while for the Continental system, another commercial product PureTemp 63 is the most adequate option., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

HYBUILD project in a nutshell

  • Pascale, Carmine
  • Zsembinszki, Gabriel
  • Morata, M.
  • Decorme, Régis
  • Barrère, C.
  • Frazzica, Andrea
  • Palomba, Valeria
  • Emhofer, Johann
  • Barz, Tilman
  • Cabeza, Luisa F.
• HYBUILD project develops innovative fully‐integrated components for hybrid electric/thermal storage solutions at domestic level • The developed solutions were optimized for both heating and cooling applications. Three demo sites have been used to validate the solutions • The full‐scale systems were successfully tested under lab‐controlled conditions but the partnership agrees that further research is needed for full market exploitation of the entire systems • Market exploitation of the entire system requires specific Business models to be developed among the entire partnership, single exploitable results are already mature for market exploitation
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Integration of a compact two fluid PCM heat exchanger into the hot superheated section of an air source heat pump cycle for optimized DHW generation

  • Emhofer, Johann
  • Barz, Tilman
  • Marx, Klemens
  • Hochwallner, Felix
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Weiss, Michael
This contribution presents a concept for the direct integration of a refrigerant/water Heat Exchanger (HEX) with a Phase Change Material (PCM) in the hot superheated section of an R32 - air source compression Heat Pump (HP) cycle, for optimized Domestic Hot Water (DHW) generation in multi-family houses. The concept takes advantage of the PCMs high thermal storage capacity integrated into a high performance compact enhanced plate-and-fin aluminium HEX. On the refrigerant side, it works as a de-superheater for DHW generation during heating and cooling operation whereas the process water is connected to decentralized DHW storages located in single apartments of a low energy building. We present results from simulations at a system level for typical operating conditions and corresponding seasonal and annual performances. Compared to conventional systems, the results indicate savings up to 11% of electric energy over the year for DHW generation in average climate., The authors thank C. Köfinger, M. Lauermann, W. Pink and A. Zottl for critical discussion.This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Hybrid cascade heat pump and thermal-electric energy storage system for residential buildings: experimental testing and performance analysis

  • Palomba, Valeria
  • Bonanno, Antonino
  • Brunaccini, Giovanni
  • Aloisio, Davide
  • Sergi, Francesco
  • Dino, Giuseppe E.
  • Varvagiannis, Efstratios
  • Karellas, Sotirios
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Groβe, André
  • Herrmann, Ralph
  • Barmparitsas, Nikolaos
  • Koch, Nelson
  • Vérez, David
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Frazzica, Andrea
The need for innovative heating and cooling systems to decarbonize the building sector is widely recognized. It is especially important to increase the share of renewables at building level by maximizing self-consumption and reducing the primary energy demand. Accordingly, in the present paper, the results on a wide experimental campaign on a hybrid system are discussed. The system included a sorption module working as the topping cycle in a cascade configuration with a DC-driven vapor compression heat pump. A three-fluids heat exchanger with a phase change material (PCM), i.e., RT4 with nominal melting temperature of 4 °C, was installed on the evaporator side of the heat pump, for simultaneous operation as thermal storage and heat pumping purposes. The heat pump was connected to a DC-bus that included PV connection and electricity storage (batteries). Results showed that the energy efficiency of the heat pump in cascade operation was double compared to compression-only configuration and that, when simultaneously charging and discharging the latent storage in cascade configuration, no penalization in terms of efficiency compared to the compression-only configuration was measured. The self-sufficiency of the system was evaluated for three reference weeks in summer conditions of Athens climate and it was found that up to 100% of the electricity needed to drive the system could be self-produced for a modest cooling demand and up to 67% for the warmer conditions with high cooling demand., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investi-gación (AEI) (RED2018-102431-T). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia program.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Phase change materials: is it still the starring technology of thermal energy storage? Current applications, perspectives and research gaps

  • Cabeza, Luisa F.
  • Borri, Emiliano
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Economia y Competitividad (TIN2015-71799-C2-2-P (MINECO/FEDER)), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PCI2020-120695-2 through PCI call), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945) and EuNightCat20 (954506). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Experimental Assessment of the Influence of the Design on the Performance of Novel Evaporators with Latent Energy Storage Ability

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Borri, Emiliano
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Cabeza, Luisa F.
This study was carried out within the HYBUILD project, as part of the task aimed at developing novel evaporators for compact and direct integration of phase-change materials (PCM) into air-conditioning systems for efficient utilization of solar energy. To achieve this, novel evaporators were designed to contain PCM between refrigerant and heat transfer fluid (HTF) channels, allowing a three-media heat exchange mechanism. This paper experimentally assesses the influence of the configuration/arrangement of the channels on the performance of the evaporators, using three different lab-scale prototypes. Key performance indicators (KPI) relevant for thermal energy storage (TES) and heat exchangers (HEX) were used to study the influence of the design on the performance of the different designs of the novel evaporators. The results show that the change in the PCM, refrigerant, and HTF channel configuration affects the performance of the novel evaporators independently. The coefficient of performance (COP) of the refrigeration system and the energy storage density of the modules are the least affected KPIs (less than 16%), whereas the state of charge (SOC) at thermal equilibrium is the most affected KPI (about 44%). A discussion on how these effects provide unique strength for specific applications is included., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Measuring user relevance in online debates through an argumentative model

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
Online debating forums are important social media for people to voice their opinions and engage in debates with each other. Measuring user relevance on these forums can be useful to identify different user profiles or behaviors in online debates, for example, users that tend to participate at the beginning of a debate and whose comments trigger participation, or users that post relevant comments but are not replied too much. To help users to distinguish such different user profiles, we propose graded measures based on users’ influence, the controversy that they generate throughout the debates, their contribution to the polarization of the debates, and their social acceptance, that we extract by analyzing the debates in which the users participate. Our approach is based on an argumentation-based analysis that represents a debate as a valued argumentation framework, in which comments of a debate are arguments, the attack relation between arguments models disagreement between comments, and values for arguments represent the overall support of users for comments. Finally, we test our measures with a sample of users from Reddit debates, identifying four main groups of users, from users with almost no impact on the debate to very active ones with decisive comments for the outcome of the debate., This work was partially funded by Spanish Project TIN2015-71799-C2-2-P (MINECO/FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537. The authors would like to thank anonymous reviewers for providing helpful comments.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

HYBUILD project in a nutshell

  • Zsembinszki, Gabriel
  • Morata, M.
  • Frazzica, Andrea
  • Palomba, Valeria
  • Emhofer, Johann
  • Barz, Tilman
  • Cabeza, Luisa F.
This is part of the project that has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824. The content of this document reflects only the author’s view and the Commission is not responsible for any use that may be made of the information it contains.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Contribución de proyectos europeos a la reducción del consumo de energía en aplicaciones en edificios y en la industria

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Fernández, Ángel G.
  • Argelich Romà, Josep
El grupo de investigación GREiA de la Universidad de Lleida, España, participa actualmente en seis proyectos financiados por la Comisión Europea a través del programa de investigación e innovación Horizonte 2020, cuyo principal objetivo es la reducción del consumo de energía y la mejora de la eficiencia energética en los sectores de la edificación y la industria. Se trata de los proyectos Innova MicroSolar, HYBUILD, SWS-HEATING, SolBio-Rev, InhibiTES y REHIB. Los primeros cuatro proyectos desarrollarán sistemas innovadores de aprovechamiento de la energía solar tales como colectores Fresnel, paneles fotovoltaicos, o colectores de vacío, combinados con equipos eficientes de generación de calor, frío o electricidad, así como sistemas de almacenamiento de energía térmica y/o eléctrica. El proyecto InhibiTES se centrará en el estudio del uso de sales fundidas de cloruros como material de almacenamiento de energía en centrales de concentración solar de torre. Finalmente, el proyecto REHIB desarrollará una herramienta de toma de decisiones para guiar a los arquitectos e ingenieros hacia la integración de tecnologías de energía renovable en edificios históricos., El grupo de investigación GREiA de la Universidad de Lleida, España, participa actualmente en seis proyectos financiados por la Comisión Europea a través del programa de investigación e innovación Horizonte 2020, cuyo principal objetivo es la reducción del consumo de energía y la mejora de la eficiencia energética en los sectores de la edificación y la industria. Se trata de los proyectos Innova MicroSolar, HYBUILD, SWS-HEATING, SolBio-Rev, InhibiTES y REHIB.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Phenomenological modelling of solid/liquid phase transitions in non-ideal PCM

  • Barz, Tilman
  • Emhofer, Johann
  • Marx, Klemens
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Thermal energy storage technologies through solid/liquid phase change materials (PCMs) use the thermodynamic principles of melting and solidification to absorb and release thermal energy. In the ideal case, this technology allows to charge and discharge relatively high amounts of thermal energy at a constant, unique temperature. However, for most commercially available technicalgrade solid/liquid PCMs melting and solidification cannot be assigned to a single, unique temperature. Instead, the phase transition takes place over a temperature range in which solid and liquid phases coexist. Moreover, supercooling sometimes causes hysteresis in the phase transitions depending on the applied heating and cooling rates. These phenomena cause non-ideal phase transition behaviour and generally reduce the applicability of the PCMs. PCM models which can reproduce this non-ideal behaviour are crucial for the numerical analysis of the charging and discharging operation of latent heat storages. This contribution presents a generic workflow for the identification of phase transition models for industrial-grade solid/liquid PCMs. Adopting a purely phenomenological approach models are directly identified from PCM heat capacity measurement data. Thus, if the data contains information on temperature ranges with coexisting phases and hysteresis in the temperature induced phase transitions these phenomena are directly accounted for. The identified transition models predict liquid mass phase fractions using PCM temperature as a model input. These models are then used to describe apparent (effective) PCM properties in the phase transition temperature range, i.e. specific heat, density and thermal conductivity. Applications of the workflow are presented for different commercial PCMs from Climator Sweden AB. The effects of non-ideal phase transition behaviour on absorption and release of heat in a latent thermal energy storage are discussed by simulation studies., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Phenomenological modelling of phase transitions with hysteresis in solid/liquid PCM

  • Barz, Tilman
  • Emhofer, Johann
  • Marx, Klemens
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Technical-grade and mixed solid/liquid phase change materials (PCM) typically melt and solidify over a temperature range, sometimes exhibiting thermal hysteresis. Three phenomenological phase transition models are presented which are directly parametrized using data from complete melting and solidification experiments. They predict hysteresis phenomena and are used to calculate effective PCM properties. Two models have already been implemented in commercial building simulation and/or multiphysics software, but not the third novel model. Applications are presented for two commercial PCM: a paraffin, and a salt water mixture with additives. Numerical implementation aspects are discussed, and significant differences in the predicted absorbed and released heat are highlighted when simulating consecutive incomplete phase transitions. The models are linked with energy balance equations to predict recorded PCM temperatures of a thermal energy storage. The cross-validation with data from 26 partial load conditions clearly indicate a superior predictive performance of the novel hysteresis model., The authors thank Birgo Nitsch, Vladimir Parfenov and Andreas Strehlow (AKG Verwaltungsgesellschaft mbH) for fruitful discussion and support in the modelling of the heat transfer in the compact plate fin heat exchanger. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Union’s Horizon 2020 research and innovation programme [grant number 768824] (HYBUILD) and from the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Life Cycle Assessment of an Innovative Hybrid Energy Storage System for Residential Buildings in Continental Climates

  • Llantoy, Noelia
  • Zsembinszki, Gabriel
  • Palomba, Valeria
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Cabeza, Luisa F.
With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31–MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades–Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

State of art of PCM for air conditioning and refrigeration

  • Cabeza, Luisa F.
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: Propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: Improve existing knowledge through research and innovation ; Help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects, HYBUILD (768824), SWS-HEATING (764025). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Methods for the determination of the state-of-charge of a thermal energy storage device

  • Zsembinszki, Gabriel
  • Vérez, David
  • Mselle, Boniface Dominick
  • Borri, Emiliano
  • Luisa F. Cabeza
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental evaluation of a heat pump-latent storage system for increasing renewable share of the residential stock

  • Palomba, Valeria
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Barmparitsas, Nikolaos
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Leontaritis, Aris
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
  • Strehlow, Andreas
The HYBUILD project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement n° 768824.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Performance study of direct integration of phase change material into an innovative evaporator of a simple vapour compression system

  • Mselle, Boniface Dominick
  • Vérez, David
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. This paper experimentally investigates the direct integration of 3.15 kg of phase change materials (PCM) into a standard vapour compression system of variable cooling capacity, through an innovative lab-scale refrigerant-PCM-water heat exchanger (RPW-HEX), replacing the conventional evaporator. Its performance was studied in three operating modes: charging, discharging, and direct heat transfer between the three fluids. In the charging mode, a maximum energy of 300 kJ can be stored in the PCM for the cooling capacity at 30% of the maximum value. By doubling the cooling power, the duration of charging is reduced by 50%, while the energy stored is only reduced by 13%. In the discharging mode, the process duration is reduced from 25 min to 9 min by increasing the heat transfer fluid (HTF) flow rate from 50 L·h-1 to 150 L·h-1. In the direct heat transfer mode, the energy stored in the PCM depends on both the cooling power and the HTF flow rate, and can vary from 220 kJ for a cooling power at 30% and HTF flow rate of 50 L·h-1 to 4 kJ for a compressor power at 15% and a HTF flow rate of 150 L·h-1. The novel heat exchanger is a feasible solution to implement latent energy storage in vapour compression systems resulting to a compact and less complex system., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Approximate and Optimal Solutions for the Bipartite Polarization Problem

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
In a recent work we introduced a problem about finding the highest polarized bipartition on a weighted and labeled graph that represents a debate developed trough some social network, where nodes represent user’s opinions and edges agreement or disagreement between users. Finding this target bipartition is an optimization problem that can be seen as a generalization of the maxcut problem, so we first introduced a basic local search algorithm to find approximate solutions of the problem. In this paper we go one step further, and we present an exact algorithm for finding the optimal solution, based on an integer programming formulation, and compare the performance of a new variant of our local search algorithm with the exact algorithm. Our results show that at least on real instances of the problem, obtained from Reddit debates, the approximate solutions obtained are almost always identical to the optimal solutions., This work was partially funded by Spanish Project PID2019- 111544GB-C22 (MINECO / FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Energia renovable, nova economia i abandonament o reforçament dels petits municipis

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gasa, Gemma
Aquest treball està parcialment finançat pel Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 (FEDER)), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), y Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya i és co-finançat per la Unió Europea a través del Fons Europeu de Desenvolupament Regional (FEDER) (2019PROD00101). També s’ha rebut finançament de l’Horitzo 2020 de l’Unió Europea dins de programes de recerca i innovació amb els projectes Innova MicroSOLAR (723596), HYBUILD (768824), SWSHEATING (764025), SolBio-Rev (814945) i CSPplus (Cofund ERA-NET Action, N° 838311). Agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2017 SGR 1537) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Measuring Polarization in Online Debates

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
Social networks can be a very successful tool to engage users to discuss relevant topics for society. However, there are also some dangers that are associated with them, such as the emergence of polarization in online discussions. Recently, there has been a growing interest to try to understand this phenomenon, as some consider that this can be harmful concerning the building of a healthy society in which citizens get used to polite discussions and even listening to opinions that may be different from theirs. In this work, we face the problem of defining a precise measure that can quantify in a meaningful way the level of polarization present in an online discussion. We focus on the Reddit social network, given that its primary focus is to foster discussions, in contrast to other social networks that have some other uses. Our measure is based on two different characteristics of an online discussion: the existence of a balanced bipartition of the users of the discussion, where one partition contains mainly users in agreement (regarding the topic of the discussion) and the other users in disagreement, and the degree of negativity of the sentiment of the interactions between these two groups of users. We discuss how different characteristics of the discussions affect the value of our polarization measure, and we finally perform an empirical evaluation over different sets of Reddit discussions about diverse classes of topics. Our results seem to indicate that our measure can capture differences in the polarization level of different discussions, which can be further understood when analyzing the values of the different factors used to define the measure., This research was funded by Spanish Project PID2019-111544GB-C22 (MINECO/FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Energy assessment based on semi-dynamic modelling of a photovoltaic driven vapour compression chiller using phase change materials for cold energy storage

  • Varvagiannis, Efstratios
  • Charalampidis, Antonios
  • Zsembinszki, Gabriel
  • Karellas, Sotirios
  • Cabeza, Luisa F.
Solar cooling systems are a promising solution for reducing the electrical consumption of conventional building cooling systems. Among various alternatives, photovoltaic driven vapour compression chillers are currently the most mature and economically feasible solar cooling technology. This study focuses on the semi-dynamic modelling of a vapour compression chiller coupled with a novel refrigerant-phase change material (PCM)-water heat exchanger (RPW-HEX) which replaces the conventional chiller's evaporator, allowing the efficient storage of the produced cooling energy. A custom-build lumped parameter model was developed in TRNSYS and was used to assess the performance of the proposed system on annual basis. Using as benchmark a conventional PV driven vapour compression chiller with electrical storage, the retrofitted hybrid storage system showed improved performance, limiting the cooling demand peaks and enhancing the solar fraction, especially for partial cooling loads. Last, a comparison of the PCM thermal energy storage to conventional batteries was carried out, leading to enhanced performance characteristics for the latter., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Dynamic Modelling of a Hybrid Solar Thermal/electric Energy Storage System for Application in Residential Buildings

  • Frazzica, Andrea
  • Palomba, Valeria
  • Sergi, Francesco
  • Ferraro, Marco
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Oró Prim, Eduard
  • Karellas, Sotirios
  • Varvagiannis, Efstratios
  • Emhofer, Johann
  • Barz, Tilman
The present paper presents the dynamic modelling of a hybrid thermal/electric energy storage for residential applications. Two systems are considered, which are suitable for application in Continental and Mediterranean climates. Both systems are suitable for the provision of heating, cooling and domestic hot water, but the Continental system is optimized for heating and domestic hot water production, whereas the Mediterranean system is optimized for the covering of cooling demands. The models are realized in Dymola/Modelica environment and are structured according to a modular approach, using only self-developed components or open source libraries. An adsorption module, used for thermal energy storage purposes, a battery pack, used for electrical storage, latent heat storages and heat pumps are the main components modelled. The integration in sub-system and the typical operation during one day under reference conditions are shown, which prove the successful integration of several sub-modules., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Repositori Obert UdL
Publicación Capítulo o parte de un libro (BookPart)

Buildings (< 50 kWh/day). Integrated Batteries with Phase Change Materials (PCM) for Peak Shaving and Load Management: The HYBUILD Example

  • Frazzica, Andrea
  • Valeria , Palomba
  • Aloisio, Davide
  • Zsembinszki, Gabriel
  • Ferraro, Marco
  • Sergi, Francesco
  • Cabeza, Luisa F.
The continuous increasing of renewable-based energy systems, both for heating and power generation, at building level requires the development of innova-tive compact hybrid energy storages. These technologies are able to support the flex-ible operation of such complex systems, increasing the exploitability of renewables and the overall system efficiency. In this chapter, a brief overview of different storage technologies, such as thermal, electric and hybrid, at building level is provided, mostly focusing on their integration with onsite renewable generation and smart grids. The analysis highlights the relevant role of flexible energy storages at building level as well as the lack of innovative components able to provide multiple services (e.g. heating, cooling, domestic hot water and power) to buildings. In such a back-ground, the experience carried out in the framework of the EU-funded HYBUILD project is described. The overall concept, integrating electric batteries, latent, and thermochemical storages, with highly efficient reversible heat pumps is described, showing the different options developed for continental and mediterranean climates. The fully integrated Mediterranean system, validated both at lab-scale and in a demo building, demonstrated the ability of increasing the share of renewables in buildings, maximizing the self-consumption and increasing the overall energy efficiency of the system., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31–MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia e Inno-vación (PID2021-123511OB-C31—MCIN/AEI/https://doi.org/10.13039/501100011033/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades–Agencia Estatal de Investi-gación (AEI) (RED2018-102431-T and RED2022-134219-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537 and 2022 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical‐Thermal Storage System for Residential Buildings in Mediterranean Climate

  • Zsembinszki, Gabriel
  • Llantoy, Noelia
  • Palomba, Valeria
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Cabeza, Luisa F.
The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings' decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact., This project received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Implementing SDGs to a Sustainable Rural Village Development from Community Empowerment: Linking Energy, Education, Innovation, and Research

  • Arco Bravo, Isabel del
  • Ramos Pla, Anabel
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
Rural depopulation is a worldwide fact and has a domino effect on medium and small cities, which act as a nucleus of reference for small towns. Moreover, the United Nations (UN) stressed that disparities between rural and urban areas are pronounced and still growing over time. Globally, people in rural areas lack access to modern energy services, which affects productivity, educational and health services, exacerbating poverty, among other things. Given this reality, the following research questions arise: how can we act to reverse this reality? Are there examples of transformation in rural contexts where community empowerment is a key strategy? This paper aims at describing the transformation process of a small rural municipality towards a sustainable development, in parallel to the activation of the local productivity that helps to eliminate the effects of rural depopulation. Therefore, the project ALMIA was established as an example of a sustainable village that is Almatret (Catalonia-Spain). The backbone of such project is the commitment to community impowerment, where the main results are the generation of networks with experts and researchers to help the municipality's energy transition, the involvement of the local administration, the commitment to technological development, as well as the socio-community development. Moreover, the activities developed within the project ALMIA are aligned with the UNs Sustainable Development Goals, alignment that is analyzed in detail. Thus, this paper aims to further highlight existing sustainable development practices related to community empowerment in order to promote similar practices., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 and under the grant agreement No 723596. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Almatret municipality for their involvement in this challenging project.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental comparison of small-scale and full-scale latent storage for integration in efficient heat pumps

  • Palomba, Valeria
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Barmparitsas, Nikolaos
  • Leontaritis, Aris
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Zsembinszki, Gabriel
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

A new methodological approach for the evaluation of scaling up a latent storage module for integration in heat pumps

  • Zsembinszki, Gabriel
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Frazzica, Andrea
  • Palomba, Valeria
  • Cabeza, Luisa F.
A clear gap was identified in the literature regarding the in-depth evaluation of scaling up thermal energy storage components. To cover such a gap, a new methodological approach was developed and applied to a novel latent thermal energy storage module. The purpose of this paper is to identify some key aspects to be considered when scaling up the module from lab-scale to full-scale using different performance indicators calculated in both charge and discharge. Different normalization methods were applied to allow an appropriate comparison of the results at both scales. As a result of the scaling up, the theoretical energy storage capacity increases by 52% and 145%, the average charging power increases by 21% and 94%, while the average discharging power decreases by 16% but increases by 36% when mass and volume normalization methods are used, respectively. When normalization by the surface area of heat transfer is used, all of the above performance indicators decrease, especially the average discharging power, which decreases by 49%. Moreover, energy performance in charge and discharge decreases by 17% and 15%, respectively. However, efficiencies related to charging, discharging, and round-trip processes are practically not affected by the scaling up., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

ALMIA Educativa as an educational strategy towards an effective energy transition of a rural village

  • Arco Bravo, Isabel del
  • Ramos Pla, Anabel
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
The 2030 Agenda for Sustainable Development [1] was adopted in 2015 by the United Nations (UN) and its member states with the main objective of providing a path to protect the planet from degradation and to people prosperity and world peace. A total of 17 Sustainable Development Goals (SDGs) are included in the agenda, with specific targets and actions to achieve this ambitious overarching goal. In Sustainable Development the person is key for policies and efforts to improve conditions in each social context. The three key aspects to consider are: (i) the promotion of remote human and socially equitable development for all humanity based on inclusion, (ii) the guidance of economic development at the service of human development, and finally, (iii) the promotion of responsible use of the planet’s natural resources [2]. The fast growth of population in large urban areas is expected to generate or aggravate many problems related to citizen insecurity, energy and water supply, excessive production and over-consumption, waste generation, etc. At the same time, access to affordable, reliable, sustainable, and modern energy for all people living in rural areas must be ensured. Education is a fundamental tool to build sustainable societies actively involving all citizens in the sustainable development. The objective of this paper is to describe the ALMIA project as a strategic plan for the transformation of a small village called Almatret (Catalonia, Spain) towards sustainable development as a net positive energy and sustainable village, aligned with the implementation of the 17 SDGs. This paper focuses on ALMIA Educativa as an educational strategy to make the energy transition effective in the rural village., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 and under the grant agreement No 723596. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Almatret municipality for their involvement in this challenging project.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment of an innovative hybrid energy storage system for residential buildings

  • Llantoy, Noelia
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Acknowledgements ThisprojecthasreceivedfundingfromtheEuropeanUnion’sHorizon2020researchandinnovationprogrammeundergrantagreementNo768824(HYBUILD).ThisworkispartiallyfundedbytheMinisteriodeCiencia,InnovaciónyUniversidadesdeEspaña(RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE)andtheMinisteriodeCiencia,InnovaciónyUniversidades-AgenciaEstataldeInvestigación(AEI)(RED2018-102431-T).TheauthorswouldliketothanktheCatalanGovernmentforthequalityaccreditationgiventotheirresearchgroup(2017SGR1537).GREiAisacertifiedagentTECNIOinthecategoryoftechnologydevelopersfromtheGovernmentofCatalonia.ThisworkispartiallysupportedbyICREAundertheICREAAcademiaprogramme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of an innovative compact hybrid electrical-thermal storage system for residential buildings in Mediterranean climate

  • Palomba, Valeria
  • Llantoy, Noelia
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
The buildings sector accounts for around 40% of the total energy demand worldwide and is therefore paramount to reduce its environmental impact. Accordingly, the use of renewable energy sources coupled with energy storage systems in buildings has been widely investigated in the last years and different solutions for cooling, heating and domestic hot water have been proposed, with the aim of reducing the building electrical consumption needed to keep comfort conditions. This study investigates the environmental impact of an innovative system proposed for residential buildings in the Mediterranean climate through a life cycle assessment. Results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849- B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Experimental evaluation of a hybrid electrical and thermal energy storage system in a pilot residential house during summer conditions in a Mediterranean climate

  • Zsembinszki, Gabriel
  • Vérez, David
  • Cabeza, Luisa F.
The integration of various types of renewable energy sources, coupled with the implementation of energy storage systems, can enhance solar energy utilisation and reduce primary energy consumption in buildings. This paper focuses on experimentally assessing the effectiveness of an innovative hybrid electric/thermal system designed to provide cooling, heating, and domestic hot water (DHW) services for single-family houses in Mediterranean climate regions. Specifically, the system integrates a sorption chiller coupled with a heat pump and a hybrid electric/thermal energy storage system to enhance overall system efficiency. It includes Fresnel solar collectors and photovoltaic panels to reduce the reliance on primary energy derived from fossil fuels. Experimental testing was conducted at a pilot house located in Spain over one representative week in the summer. The results were assessed based on various key performance indicators (KPIs), including the thermal energy efficiency ratio and performance ratio, electric selfconsumption, self-sufficiency, and share of renewables, among others. The sorption chiller exhibited a relatively low thermal efficiency ratio of 0.35 and a higher thermal performance factor of 1.88, indicating limited use of this component. Positive outcomes were obtained for selfconsumption, self-sufficiency, and share of renewables, which attained a weekly average of 0.80, 0.50, and 0.67, respectively., This project was funded by the European Union's Horizon 2020 Research and Innovation Programme under No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU; and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank all the persons that contributed to the design and development of the installation evaluated in this paper.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Techno-economic analysis of a heat pump cycle including a three-media refrigerant/phase change material/water heat exchanger in the hot superheated section for effi cient domestic hot water generation

  • Emhofer, Johann
  • Marx, Klemens
  • Barz, Tilman
  • Hochwallner, Felix
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Wiesflecker, Michael
  • Pink, Werner
Integration of a three-media refrigerant/phase change material (PCM)/water heat exchanger (RPW-HEX) in the hot superheated section of a heat pump (HP) system is a promising approach to save energy for domestic hot water (DHW) generation in multi-family houses. The RPW-HEX works as a desuperheater and as a latent thermal energy storage in the system. The latent thermal energy storage is charged during heating and cooling operation and discharged for DHW production. For this purpose, the water side of the RPW-HEX is connected to decentralized DHW storage devices. DHWconsumption, building standards and climate, energy prices, material costs, and production costs are the constraints for the selection of the optimal storage size and RPW-HEX design. This contribution presents the techno-economic analysis of the RPW-HEX integrated into an R32 air source HP. With the aid of experimentally validated dynamic computer models, the optimal sizing of the RPW-HEX storage is discussed to maximize energy savings and to minimize the investment costs. The results are discussed in the context of a return of investment analysis, practical implementation aspects and energetic potential of the novel technology., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially supported by ICREA under the ICREA Academia programme. The authors thank C. Köfinger, M. Lauermann, and A. Zottl for critical discussion. Furthermore, we thank A. Bras and S. Hauer for their assistance in generating the data of the different buildings. The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental evaluation of a heat pump-latent storage system for increasing renewable share of the residential stock

  • Palomba, Valeria
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Barmparitsas, Nikolaos
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Leontaritis, Aris
  • Strehlow, Andreas
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
In the present work, the integration of a three-fluids heat exchanger in the evaporator of a reversible heat pump is evaluated. The heat exchanger includes internally finned passages for the refrigerant of the heat pump cycle and for the heat transfer fluid (water/glycol mixture) and externally finned passages for Phase Change Material (PCM). The selected PCM is a commercial paraffin (RT4) with nominal melting point of 4°C. The operation of the integrated heat pump with latent storage under typical cooling season conditions in Mediterranean warm climates were evaluated through an experimental campaign at CNR. The effect of operating modes and operational conditions was identified. During charge, the variable speed of the compressor was found to yield the maximum effect on storage dynamics, whereas during discharge the prevalent effect is that of the heat transfer fluid flow rate. Based on the outcomes of measurement, a critical design review and control strategy improvement were carried out., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of an innovative compact hybrid electrical-thermal storage system for residential buildings in Mediterranean climate

  • Palomba, Valeria
  • Llantoy, Noelia
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
The buildings sector accounts for around 40% of the total energy demand worldwide and is therefore paramount to reduce its environmental impact. Accordingly, the use of renewable energy sources coupled with energy storage systems in buildings has been widely investigated in the last years and different solutions for cooling, heating and domestic hot water have been proposed, with the aim of reducing the building electrical consumption needed to keep comfort conditions. This study investigates the environmental impact of an innovative system proposed for residential buildings in the Mediterranean climate through a life cycle assessment. Results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849- B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Selection of the appropriate phase change material for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Fernández, Ángel G.
  • Cabeza, Luisa F.
The implementation of thermal energy storage systems using phase change materials to support the integration of renewable energies is a key element that allows reducing the energy consumption in buildings by increasing self-consumption and system efficiency. The selection of the most suitable phase change material is an important part of the successful implementation of the thermal energy storage system. The aim of this paper is to present the methodology used to assess the suitability of potential phase change materials to be used in two innovative energy storage systems, one of them being mainly intended to provide cooling, while the other provides heating and domestic hot water to residential buildings. The selection methodology relies on a qualitative decision matrix, which uses some common features of phase change materials to assign an overall score to each material that should allow comparing the different options. Experimental characterization of the best candidates was also performed to help in making a final decision. The results indicate some of the most suitable candidates for both systems, with RT4 being the most promising commercial phase change material for the system designed to provide cooling, while for the system designed to provide heating and domestic hot water, the most promising candidate is RT64HC, another commercial product., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Methods for the determination of the state-of-charge of a thermal energy storage device

  • Zsembinszki, Gabriel
  • Vérez, David
  • Mselle, Boniface Dominick
  • Borri, Emiliano
  • Luisa F. Cabeza
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental comparison of small-scale and full-scale latent storage for integration in efficient heat pumps

  • Palomba, Valeria
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Barmparitsas, Nikolaos
  • Leontaritis, Aris
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Zsembinszki, Gabriel
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Energia renovable, nova economia i abandonament o reforçament dels petits municipis

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gasa, Gemma
Aquest treball està parcialment finançat pel Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 (FEDER)), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), y Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya i és co-finançat per la Unió Europea a través del Fons Europeu de Desenvolupament Regional (FEDER) (2019PROD00101). També s’ha rebut finançament de l’Horitzo 2020 de l’Unió Europea dins de programes de recerca i innovació amb els projectes Innova MicroSOLAR (723596), HYBUILD (768824), SWSHEATING (764025), SolBio-Rev (814945) i CSPplus (Cofund ERA-NET Action, N° 838311). Agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2017 SGR 1537) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

State of art of PCM for air conditioning and refrigeration

  • Cabeza, Luisa F.
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: Propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: Improve existing knowledge through research and innovation ; Help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects, HYBUILD (768824), SWS-HEATING (764025). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance study of direct integration of phase change material into an innovative evaporator of a simple vapour compression system

  • Mselle, Boniface Dominick
  • Vérez, David
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. This paper experimentally investigates the direct integration of 3.15 kg of phase change materials (PCM) into a standard vapour compression system of variable cooling capacity, through an innovative lab-scale refrigerant-PCM-water heat exchanger (RPW-HEX), replacing the conventional evaporator. Its performance was studied in three operating modes: charging, discharging, and direct heat transfer between the three fluids. In the charging mode, a maximum energy of 300 kJ can be stored in the PCM for the cooling capacity at 30% of the maximum value. By doubling the cooling power, the duration of charging is reduced by 50%, while the energy stored is only reduced by 13%. In the discharging mode, the process duration is reduced from 25 min to 9 min by increasing the heat transfer fluid (HTF) flow rate from 50 L·h-1 to 150 L·h-1. In the direct heat transfer mode, the energy stored in the PCM depends on both the cooling power and the HTF flow rate, and can vary from 220 kJ for a cooling power at 30% and HTF flow rate of 50 L·h-1 to 4 kJ for a compressor power at 15% and a HTF flow rate of 150 L·h-1. The novel heat exchanger is a feasible solution to implement latent energy storage in vapour compression systems resulting to a compact and less complex system., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Phase change materials: is it still the starring technology of thermal energy storage? Current applications, perspectives and research gaps

  • Cabeza, Luisa F.
  • Borri, Emiliano
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Economia y Competitividad (TIN2015-71799-C2-2-P (MINECO/FEDER)), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PCI2020-120695-2 through PCI call), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945) and EuNightCat20 (954506). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental evaluation of a heat pump-latent storage system for increasing renewable share of the residential stock

  • Palomba, Valeria
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Barmparitsas, Nikolaos
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Leontaritis, Aris
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
  • Strehlow, Andreas
The HYBUILD project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement n° 768824.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Techno-economic analysis of a heat pump cycle including a three-media refrigerant/phase change material/water heat exchanger in the hot superheated section for effi cient domestic hot water generation

  • Emhofer, Johann
  • Marx, Klemens
  • Barz, Tilman
  • Hochwallner, Felix
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Wiesflecker, Michael
  • Pink, Werner
Integration of a three-media refrigerant/phase change material (PCM)/water heat exchanger (RPW-HEX) in the hot superheated section of a heat pump (HP) system is a promising approach to save energy for domestic hot water (DHW) generation in multi-family houses. The RPW-HEX works as a desuperheater and as a latent thermal energy storage in the system. The latent thermal energy storage is charged during heating and cooling operation and discharged for DHW production. For this purpose, the water side of the RPW-HEX is connected to decentralized DHW storage devices. DHWconsumption, building standards and climate, energy prices, material costs, and production costs are the constraints for the selection of the optimal storage size and RPW-HEX design. This contribution presents the techno-economic analysis of the RPW-HEX integrated into an R32 air source HP. With the aid of experimentally validated dynamic computer models, the optimal sizing of the RPW-HEX storage is discussed to maximize energy savings and to minimize the investment costs. The results are discussed in the context of a return of investment analysis, practical implementation aspects and energetic potential of the novel technology., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially supported by ICREA under the ICREA Academia programme. The authors thank C. Köfinger, M. Lauermann, and A. Zottl for critical discussion. Furthermore, we thank A. Bras and S. Hauer for their assistance in generating the data of the different buildings. The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment of an innovative hybrid energy storage system for residential buildings

  • Llantoy, Noelia
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Acknowledgements ThisprojecthasreceivedfundingfromtheEuropeanUnion’sHorizon2020researchandinnovationprogrammeundergrantagreementNo768824(HYBUILD).ThisworkispartiallyfundedbytheMinisteriodeCiencia,InnovaciónyUniversidadesdeEspaña(RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE)andtheMinisteriodeCiencia,InnovaciónyUniversidades-AgenciaEstataldeInvestigación(AEI)(RED2018-102431-T).TheauthorswouldliketothanktheCatalanGovernmentforthequalityaccreditationgiventotheirresearchgroup(2017SGR1537).GREiAisacertifiedagentTECNIOinthecategoryoftechnologydevelopersfromtheGovernmentofCatalonia.ThisworkispartiallysupportedbyICREAundertheICREAAcademiaprogramme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Measuring Polarization in Online Debates

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
Social networks can be a very successful tool to engage users to discuss relevant topics for society. However, there are also some dangers that are associated with them, such as the emergence of polarization in online discussions. Recently, there has been a growing interest to try to understand this phenomenon, as some consider that this can be harmful concerning the building of a healthy society in which citizens get used to polite discussions and even listening to opinions that may be different from theirs. In this work, we face the problem of defining a precise measure that can quantify in a meaningful way the level of polarization present in an online discussion. We focus on the Reddit social network, given that its primary focus is to foster discussions, in contrast to other social networks that have some other uses. Our measure is based on two different characteristics of an online discussion: the existence of a balanced bipartition of the users of the discussion, where one partition contains mainly users in agreement (regarding the topic of the discussion) and the other users in disagreement, and the degree of negativity of the sentiment of the interactions between these two groups of users. We discuss how different characteristics of the discussions affect the value of our polarization measure, and we finally perform an empirical evaluation over different sets of Reddit discussions about diverse classes of topics. Our results seem to indicate that our measure can capture differences in the polarization level of different discussions, which can be further understood when analyzing the values of the different factors used to define the measure., This research was funded by Spanish Project PID2019-111544GB-C22 (MINECO/FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical‐Thermal Storage System for Residential Buildings in Mediterranean Climate

  • Zsembinszki, Gabriel
  • Llantoy, Noelia
  • Palomba, Valeria
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Cabeza, Luisa F.
The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings' decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact., This project received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Capítulo o parte de un libro (BookPart)

Buildings (< 50 kWh/day). Integrated Batteries with Phase Change Materials (PCM) for Peak Shaving and Load Management: The HYBUILD Example

  • Frazzica, Andrea
  • Valeria , Palomba
  • Aloisio, Davide
  • Zsembinszki, Gabriel
  • Ferraro, Marco
  • Sergi, Francesco
  • Cabeza, Luisa F.
The continuous increasing of renewable-based energy systems, both for heating and power generation, at building level requires the development of innova-tive compact hybrid energy storages. These technologies are able to support the flex-ible operation of such complex systems, increasing the exploitability of renewables and the overall system efficiency. In this chapter, a brief overview of different storage technologies, such as thermal, electric and hybrid, at building level is provided, mostly focusing on their integration with onsite renewable generation and smart grids. The analysis highlights the relevant role of flexible energy storages at building level as well as the lack of innovative components able to provide multiple services (e.g. heating, cooling, domestic hot water and power) to buildings. In such a back-ground, the experience carried out in the framework of the EU-funded HYBUILD project is described. The overall concept, integrating electric batteries, latent, and thermochemical storages, with highly efficient reversible heat pumps is described, showing the different options developed for continental and mediterranean climates. The fully integrated Mediterranean system, validated both at lab-scale and in a demo building, demonstrated the ability of increasing the share of renewables in buildings, maximizing the self-consumption and increasing the overall energy efficiency of the system., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31–MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia e Inno-vación (PID2021-123511OB-C31—MCIN/AEI/https://doi.org/10.13039/501100011033/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades–Agencia Estatal de Investi-gación (AEI) (RED2018-102431-T and RED2022-134219-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537 and 2022 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Measuring user relevance in online debates through an argumentative model

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
Online debating forums are important social media for people to voice their opinions and engage in debates with each other. Measuring user relevance on these forums can be useful to identify different user profiles or behaviors in online debates, for example, users that tend to participate at the beginning of a debate and whose comments trigger participation, or users that post relevant comments but are not replied too much. To help users to distinguish such different user profiles, we propose graded measures based on users’ influence, the controversy that they generate throughout the debates, their contribution to the polarization of the debates, and their social acceptance, that we extract by analyzing the debates in which the users participate. Our approach is based on an argumentation-based analysis that represents a debate as a valued argumentation framework, in which comments of a debate are arguments, the attack relation between arguments models disagreement between comments, and values for arguments represent the overall support of users for comments. Finally, we test our measures with a sample of users from Reddit debates, identifying four main groups of users, from users with almost no impact on the debate to very active ones with decisive comments for the outcome of the debate., This work was partially funded by Spanish Project TIN2015-71799-C2-2-P (MINECO/FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537. The authors would like to thank anonymous reviewers for providing helpful comments.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Approximate and Optimal Solutions for the Bipartite Polarization Problem

  • Alsinet, Teresa
  • Argelich Romà, Josep
  • Béjar Torres, Ramón
  • Martínez Rodríguez, Santi
In a recent work we introduced a problem about finding the highest polarized bipartition on a weighted and labeled graph that represents a debate developed trough some social network, where nodes represent user’s opinions and edges agreement or disagreement between users. Finding this target bipartition is an optimization problem that can be seen as a generalization of the maxcut problem, so we first introduced a basic local search algorithm to find approximate solutions of the problem. In this paper we go one step further, and we present an exact algorithm for finding the optimal solution, based on an integer programming formulation, and compare the performance of a new variant of our local search algorithm with the exact algorithm. Our results show that at least on real instances of the problem, obtained from Reddit debates, the approximate solutions obtained are almost always identical to the optimal solutions., This work was partially funded by Spanish Project PID2019- 111544GB-C22 (MINECO / FEDER), by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreements 723596, 768824, 764025 and 814945, and by 2017 SGR 1537.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Implementing SDGs to a Sustainable Rural Village Development from Community Empowerment: Linking Energy, Education, Innovation, and Research

  • Arco Bravo, Isabel del
  • Ramos Pla, Anabel
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
Rural depopulation is a worldwide fact and has a domino effect on medium and small cities, which act as a nucleus of reference for small towns. Moreover, the United Nations (UN) stressed that disparities between rural and urban areas are pronounced and still growing over time. Globally, people in rural areas lack access to modern energy services, which affects productivity, educational and health services, exacerbating poverty, among other things. Given this reality, the following research questions arise: how can we act to reverse this reality? Are there examples of transformation in rural contexts where community empowerment is a key strategy? This paper aims at describing the transformation process of a small rural municipality towards a sustainable development, in parallel to the activation of the local productivity that helps to eliminate the effects of rural depopulation. Therefore, the project ALMIA was established as an example of a sustainable village that is Almatret (Catalonia-Spain). The backbone of such project is the commitment to community impowerment, where the main results are the generation of networks with experts and researchers to help the municipality's energy transition, the involvement of the local administration, the commitment to technological development, as well as the socio-community development. Moreover, the activities developed within the project ALMIA are aligned with the UNs Sustainable Development Goals, alignment that is analyzed in detail. Thus, this paper aims to further highlight existing sustainable development practices related to community empowerment in order to promote similar practices., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 and under the grant agreement No 723596. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Almatret municipality for their involvement in this challenging project.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hybrid cascade heat pump and thermal-electric energy storage system for residential buildings: experimental testing and performance analysis

  • Palomba, Valeria
  • Bonanno, Antonino
  • Brunaccini, Giovanni
  • Aloisio, Davide
  • Sergi, Francesco
  • Dino, Giuseppe E.
  • Varvagiannis, Efstratios
  • Karellas, Sotirios
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Groβe, André
  • Herrmann, Ralph
  • Barmparitsas, Nikolaos
  • Koch, Nelson
  • Vérez, David
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Frazzica, Andrea
The need for innovative heating and cooling systems to decarbonize the building sector is widely recognized. It is especially important to increase the share of renewables at building level by maximizing self-consumption and reducing the primary energy demand. Accordingly, in the present paper, the results on a wide experimental campaign on a hybrid system are discussed. The system included a sorption module working as the topping cycle in a cascade configuration with a DC-driven vapor compression heat pump. A three-fluids heat exchanger with a phase change material (PCM), i.e., RT4 with nominal melting temperature of 4 °C, was installed on the evaporator side of the heat pump, for simultaneous operation as thermal storage and heat pumping purposes. The heat pump was connected to a DC-bus that included PV connection and electricity storage (batteries). Results showed that the energy efficiency of the heat pump in cascade operation was double compared to compression-only configuration and that, when simultaneously charging and discharging the latent storage in cascade configuration, no penalization in terms of efficiency compared to the compression-only configuration was measured. The self-sufficiency of the system was evaluated for three reference weeks in summer conditions of Athens climate and it was found that up to 100% of the electricity needed to drive the system could be self-produced for a modest cooling demand and up to 67% for the warmer conditions with high cooling demand., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investi-gación (AEI) (RED2018-102431-T). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia program.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Phenomenological modelling of solid/liquid phase transitions in non-ideal PCM

  • Barz, Tilman
  • Emhofer, Johann
  • Marx, Klemens
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Thermal energy storage technologies through solid/liquid phase change materials (PCMs) use the thermodynamic principles of melting and solidification to absorb and release thermal energy. In the ideal case, this technology allows to charge and discharge relatively high amounts of thermal energy at a constant, unique temperature. However, for most commercially available technicalgrade solid/liquid PCMs melting and solidification cannot be assigned to a single, unique temperature. Instead, the phase transition takes place over a temperature range in which solid and liquid phases coexist. Moreover, supercooling sometimes causes hysteresis in the phase transitions depending on the applied heating and cooling rates. These phenomena cause non-ideal phase transition behaviour and generally reduce the applicability of the PCMs. PCM models which can reproduce this non-ideal behaviour are crucial for the numerical analysis of the charging and discharging operation of latent heat storages. This contribution presents a generic workflow for the identification of phase transition models for industrial-grade solid/liquid PCMs. Adopting a purely phenomenological approach models are directly identified from PCM heat capacity measurement data. Thus, if the data contains information on temperature ranges with coexisting phases and hysteresis in the temperature induced phase transitions these phenomena are directly accounted for. The identified transition models predict liquid mass phase fractions using PCM temperature as a model input. These models are then used to describe apparent (effective) PCM properties in the phase transition temperature range, i.e. specific heat, density and thermal conductivity. Applications of the workflow are presented for different commercial PCMs from Climator Sweden AB. The effects of non-ideal phase transition behaviour on absorption and release of heat in a latent thermal energy storage are discussed by simulation studies., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A new methodological approach for the evaluation of scaling up a latent storage module for integration in heat pumps

  • Zsembinszki, Gabriel
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Frazzica, Andrea
  • Palomba, Valeria
  • Cabeza, Luisa F.
A clear gap was identified in the literature regarding the in-depth evaluation of scaling up thermal energy storage components. To cover such a gap, a new methodological approach was developed and applied to a novel latent thermal energy storage module. The purpose of this paper is to identify some key aspects to be considered when scaling up the module from lab-scale to full-scale using different performance indicators calculated in both charge and discharge. Different normalization methods were applied to allow an appropriate comparison of the results at both scales. As a result of the scaling up, the theoretical energy storage capacity increases by 52% and 145%, the average charging power increases by 21% and 94%, while the average discharging power decreases by 16% but increases by 36% when mass and volume normalization methods are used, respectively. When normalization by the surface area of heat transfer is used, all of the above performance indicators decrease, especially the average discharging power, which decreases by 49%. Moreover, energy performance in charge and discharge decreases by 17% and 15%, respectively. However, efficiencies related to charging, discharging, and round-trip processes are practically not affected by the scaling up., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Energy assessment based on semi-dynamic modelling of a photovoltaic driven vapour compression chiller using phase change materials for cold energy storage

  • Varvagiannis, Efstratios
  • Charalampidis, Antonios
  • Zsembinszki, Gabriel
  • Karellas, Sotirios
  • Cabeza, Luisa F.
Solar cooling systems are a promising solution for reducing the electrical consumption of conventional building cooling systems. Among various alternatives, photovoltaic driven vapour compression chillers are currently the most mature and economically feasible solar cooling technology. This study focuses on the semi-dynamic modelling of a vapour compression chiller coupled with a novel refrigerant-phase change material (PCM)-water heat exchanger (RPW-HEX) which replaces the conventional chiller's evaporator, allowing the efficient storage of the produced cooling energy. A custom-build lumped parameter model was developed in TRNSYS and was used to assess the performance of the proposed system on annual basis. Using as benchmark a conventional PV driven vapour compression chiller with electrical storage, the retrofitted hybrid storage system showed improved performance, limiting the cooling demand peaks and enhancing the solar fraction, especially for partial cooling loads. Last, a comparison of the PCM thermal energy storage to conventional batteries was carried out, leading to enhanced performance characteristics for the latter., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

HYBUILD project in a nutshell

  • Pascale, Carmine
  • Zsembinszki, Gabriel
  • Morata, M.
  • Decorme, Régis
  • Barrère, C.
  • Frazzica, Andrea
  • Palomba, Valeria
  • Emhofer, Johann
  • Barz, Tilman
  • Cabeza, Luisa F.
• HYBUILD project develops innovative fully‐integrated components for hybrid electric/thermal storage solutions at domestic level • The developed solutions were optimized for both heating and cooling applications. Three demo sites have been used to validate the solutions • The full‐scale systems were successfully tested under lab‐controlled conditions but the partnership agrees that further research is needed for full market exploitation of the entire systems • Market exploitation of the entire system requires specific Business models to be developed among the entire partnership, single exploitable results are already mature for market exploitation
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

ALMIA Educativa as an educational strategy towards an effective energy transition of a rural village

  • Arco Bravo, Isabel del
  • Ramos Pla, Anabel
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
The 2030 Agenda for Sustainable Development [1] was adopted in 2015 by the United Nations (UN) and its member states with the main objective of providing a path to protect the planet from degradation and to people prosperity and world peace. A total of 17 Sustainable Development Goals (SDGs) are included in the agenda, with specific targets and actions to achieve this ambitious overarching goal. In Sustainable Development the person is key for policies and efforts to improve conditions in each social context. The three key aspects to consider are: (i) the promotion of remote human and socially equitable development for all humanity based on inclusion, (ii) the guidance of economic development at the service of human development, and finally, (iii) the promotion of responsible use of the planet’s natural resources [2]. The fast growth of population in large urban areas is expected to generate or aggravate many problems related to citizen insecurity, energy and water supply, excessive production and over-consumption, waste generation, etc. At the same time, access to affordable, reliable, sustainable, and modern energy for all people living in rural areas must be ensured. Education is a fundamental tool to build sustainable societies actively involving all citizens in the sustainable development. The objective of this paper is to describe the ALMIA project as a strategic plan for the transformation of a small village called Almatret (Catalonia, Spain) towards sustainable development as a net positive energy and sustainable village, aligned with the implementation of the 17 SDGs. This paper focuses on ALMIA Educativa as an educational strategy to make the energy transition effective in the rural village., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 and under the grant agreement No 723596. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Almatret municipality for their involvement in this challenging project.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental Assessment of the Influence of the Design on the Performance of Novel Evaporators with Latent Energy Storage Ability

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Borri, Emiliano
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Cabeza, Luisa F.
This study was carried out within the HYBUILD project, as part of the task aimed at developing novel evaporators for compact and direct integration of phase-change materials (PCM) into air-conditioning systems for efficient utilization of solar energy. To achieve this, novel evaporators were designed to contain PCM between refrigerant and heat transfer fluid (HTF) channels, allowing a three-media heat exchange mechanism. This paper experimentally assesses the influence of the configuration/arrangement of the channels on the performance of the evaporators, using three different lab-scale prototypes. Key performance indicators (KPI) relevant for thermal energy storage (TES) and heat exchangers (HEX) were used to study the influence of the design on the performance of the different designs of the novel evaporators. The results show that the change in the PCM, refrigerant, and HTF channel configuration affects the performance of the novel evaporators independently. The coefficient of performance (COP) of the refrigeration system and the energy storage density of the modules are the least affected KPIs (less than 16%), whereas the state of charge (SOC) at thermal equilibrium is the most affected KPI (about 44%). A discussion on how these effects provide unique strength for specific applications is included., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of a novel three-fluids heat exchanger embedded with phase change materials for cooling applications

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Phenomenological modelling of phase transitions with hysteresis in solid/liquid PCM

  • Barz, Tilman
  • Emhofer, Johann
  • Marx, Klemens
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Technical-grade and mixed solid/liquid phase change materials (PCM) typically melt and solidify over a temperature range, sometimes exhibiting thermal hysteresis. Three phenomenological phase transition models are presented which are directly parametrized using data from complete melting and solidification experiments. They predict hysteresis phenomena and are used to calculate effective PCM properties. Two models have already been implemented in commercial building simulation and/or multiphysics software, but not the third novel model. Applications are presented for two commercial PCM: a paraffin, and a salt water mixture with additives. Numerical implementation aspects are discussed, and significant differences in the predicted absorbed and released heat are highlighted when simulating consecutive incomplete phase transitions. The models are linked with energy balance equations to predict recorded PCM temperatures of a thermal energy storage. The cross-validation with data from 26 partial load conditions clearly indicate a superior predictive performance of the novel hysteresis model., The authors thank Birgo Nitsch, Vladimir Parfenov and Andreas Strehlow (AKG Verwaltungsgesellschaft mbH) for fruitful discussion and support in the modelling of the heat transfer in the compact plate fin heat exchanger. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Union’s Horizon 2020 research and innovation programme [grant number 768824] (HYBUILD) and from the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Life Cycle Assessment of an Innovative Hybrid Energy Storage System for Residential Buildings in Continental Climates

  • Llantoy, Noelia
  • Zsembinszki, Gabriel
  • Palomba, Valeria
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Cabeza, Luisa F.
With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31–MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades–Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Phase change material selection for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Gasia, Jaume
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Within the framework of HYBUILD, an EU Horizon 2020-funded project, two innovative compact hybrid electrical/thermal storage systems for stand-alone and district connected residential buildings will be developed and tested in three demos located in Spain, France, and Cyprus. One of the innovative systems is aimed to be placed in buildings located in Mediterranean climate regions, where cooling loads are dominant, while the other system is intended for Continental climate regions, where the heating demand is dominant. Each system will include, among others components such as a sorption storage system and domestic hot water tanks, a latent thermal energy storage (LTES) system that will be connected to a heat pump through an innovative heat exchanger made of aluminium and filled with phase change material (PCM). In both cases, the heat pump works with electricity provided by a photovoltaic system that is, at the same time, connected to an electrical storage battery. The aim of using the LTES system is to enhance the use of solar energy, which will be translated into a reduction of the building energy consumption and related costs. This study focuses on the selection of the most suitable PCM to be used in each system. On the one hand, the LTES system of the Mediterranean system will be used to store cold to reduce the cooling demand. Taking into account that, according to the design parameters, the heat pump will require a refrigerant evaporation temperature around 2 ºC, and the building cooling system will require water supply in the range from 7 ºC to 12 ºC, the PCM melting temperature range should be within 0 ºC and 7 ºC. On the other hand, the LTES system of the Continental system will be used to store heat to reduce the domestic hot water (DHW) demand. The LTES will be located at the compressor outlet and will be charged by the hot refrigerant that exits the compressor at temperatures as high as 120 ºC. During the discharge process, the heat stored in the LTES will be supplied to the DHW at a temperature in the range between 50 ºC to 55 ºC. As a consequence, the range for the PCM melting temperature investigated in this case should be between 62 ºC and 68 ºC. Besides the melting temperature, other selection criteria considered include the PCM melting enthalpy and melting range, maximum allowed working temperature, density, thermal conductivity, availability, cost, and compatibility with aluminium. To decide the ideal PCM candidate for each system, a decision matrix was defined and used, by applying a weighted score to the selection criteria items according to their importance. The preliminary results indicate that for the Mediterranean system the best candidate is the commercial savE OM3 PCM, while for the Continental system, another commercial product PureTemp 63 is the most adequate option., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Dynamic Modelling of a Hybrid Solar Thermal/electric Energy Storage System for Application in Residential Buildings

  • Frazzica, Andrea
  • Palomba, Valeria
  • Sergi, Francesco
  • Ferraro, Marco
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Oró Prim, Eduard
  • Karellas, Sotirios
  • Varvagiannis, Efstratios
  • Emhofer, Johann
  • Barz, Tilman
The present paper presents the dynamic modelling of a hybrid thermal/electric energy storage for residential applications. Two systems are considered, which are suitable for application in Continental and Mediterranean climates. Both systems are suitable for the provision of heating, cooling and domestic hot water, but the Continental system is optimized for heating and domestic hot water production, whereas the Mediterranean system is optimized for the covering of cooling demands. The models are realized in Dymola/Modelica environment and are structured according to a modular approach, using only self-developed components or open source libraries. An adsorption module, used for thermal energy storage purposes, a battery pack, used for electrical storage, latent heat storages and heat pumps are the main components modelled. The integration in sub-system and the typical operation during one day under reference conditions are shown, which prove the successful integration of several sub-modules., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integration of a compact two fluid PCM heat exchanger into the hot superheated section of an air source heat pump cycle for optimized DHW generation

  • Emhofer, Johann
  • Barz, Tilman
  • Marx, Klemens
  • Hochwallner, Felix
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Weiss, Michael
This contribution presents a concept for the direct integration of a refrigerant/water Heat Exchanger (HEX) with a Phase Change Material (PCM) in the hot superheated section of an R32 - air source compression Heat Pump (HP) cycle, for optimized Domestic Hot Water (DHW) generation in multi-family houses. The concept takes advantage of the PCMs high thermal storage capacity integrated into a high performance compact enhanced plate-and-fin aluminium HEX. On the refrigerant side, it works as a de-superheater for DHW generation during heating and cooling operation whereas the process water is connected to decentralized DHW storages located in single apartments of a low energy building. We present results from simulations at a system level for typical operating conditions and corresponding seasonal and annual performances. Compared to conventional systems, the results indicate savings up to 11% of electric energy over the year for DHW generation in average climate., The authors thank C. Köfinger, M. Lauermann, W. Pink and A. Zottl for critical discussion.This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental evaluation of a heat pump-latent storage system for increasing renewable share of the residential stock

  • Palomba, Valeria
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Barmparitsas, Nikolaos
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Leontaritis, Aris
  • Strehlow, Andreas
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
In the present work, the integration of a three-fluids heat exchanger in the evaporator of a reversible heat pump is evaluated. The heat exchanger includes internally finned passages for the refrigerant of the heat pump cycle and for the heat transfer fluid (water/glycol mixture) and externally finned passages for Phase Change Material (PCM). The selected PCM is a commercial paraffin (RT4) with nominal melting point of 4°C. The operation of the integrated heat pump with latent storage under typical cooling season conditions in Mediterranean warm climates were evaluated through an experimental campaign at CNR. The effect of operating modes and operational conditions was identified. During charge, the variable speed of the compressor was found to yield the maximum effect on storage dynamics, whereas during discharge the prevalent effect is that of the heat transfer fluid flow rate. Based on the outcomes of measurement, a critical design review and control strategy improvement were carried out., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Contribución de proyectos europeos a la reducción del consumo de energía en aplicaciones en edificios y en la industria

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Fernández, Ángel G.
  • Argelich Romà, Josep
El grupo de investigación GREiA de la Universidad de Lleida, España, participa actualmente en seis proyectos financiados por la Comisión Europea a través del programa de investigación e innovación Horizonte 2020, cuyo principal objetivo es la reducción del consumo de energía y la mejora de la eficiencia energética en los sectores de la edificación y la industria. Se trata de los proyectos Innova MicroSolar, HYBUILD, SWS-HEATING, SolBio-Rev, InhibiTES y REHIB. Los primeros cuatro proyectos desarrollarán sistemas innovadores de aprovechamiento de la energía solar tales como colectores Fresnel, paneles fotovoltaicos, o colectores de vacío, combinados con equipos eficientes de generación de calor, frío o electricidad, así como sistemas de almacenamiento de energía térmica y/o eléctrica. El proyecto InhibiTES se centrará en el estudio del uso de sales fundidas de cloruros como material de almacenamiento de energía en centrales de concentración solar de torre. Finalmente, el proyecto REHIB desarrollará una herramienta de toma de decisiones para guiar a los arquitectos e ingenieros hacia la integración de tecnologías de energía renovable en edificios históricos., El grupo de investigación GREiA de la Universidad de Lleida, España, participa actualmente en seis proyectos financiados por la Comisión Europea a través del programa de investigación e innovación Horizonte 2020, cuyo principal objetivo es la reducción del consumo de energía y la mejora de la eficiencia energética en los sectores de la edificación y la industria. Se trata de los proyectos Innova MicroSolar, HYBUILD, SWS-HEATING, SolBio-Rev, InhibiTES y REHIB.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental evaluation of a hybrid electrical and thermal energy storage system in a pilot residential house during summer conditions in a Mediterranean climate

  • Zsembinszki, Gabriel
  • Vérez, David
  • Cabeza, Luisa F.
The integration of various types of renewable energy sources, coupled with the implementation of energy storage systems, can enhance solar energy utilisation and reduce primary energy consumption in buildings. This paper focuses on experimentally assessing the effectiveness of an innovative hybrid electric/thermal system designed to provide cooling, heating, and domestic hot water (DHW) services for single-family houses in Mediterranean climate regions. Specifically, the system integrates a sorption chiller coupled with a heat pump and a hybrid electric/thermal energy storage system to enhance overall system efficiency. It includes Fresnel solar collectors and photovoltaic panels to reduce the reliance on primary energy derived from fossil fuels. Experimental testing was conducted at a pilot house located in Spain over one representative week in the summer. The results were assessed based on various key performance indicators (KPIs), including the thermal energy efficiency ratio and performance ratio, electric selfconsumption, self-sufficiency, and share of renewables, among others. The sorption chiller exhibited a relatively low thermal efficiency ratio of 0.35 and a higher thermal performance factor of 1.88, indicating limited use of this component. Positive outcomes were obtained for selfconsumption, self-sufficiency, and share of renewables, which attained a weekly average of 0.80, 0.50, and 0.67, respectively., This project was funded by the European Union's Horizon 2020 Research and Innovation Programme under No. 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU; and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank all the persons that contributed to the design and development of the installation evaluated in this paper.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

HYBUILD project in a nutshell

  • Zsembinszki, Gabriel
  • Morata, M.
  • Frazzica, Andrea
  • Palomba, Valeria
  • Emhofer, Johann
  • Barz, Tilman
  • Cabeza, Luisa F.
This is part of the project that has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824. The content of this document reflects only the author’s view and the Commission is not responsible for any use that may be made of the information it contains.