Pasar al contenido principal

RED ESPAÑOLA EN ALMACENAMIENTO DE ENERGIA TERMICA

RED2024-153629-T

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Transferencia y Colaboración
Subprograma Subprograma Estatal para impulsar la Colaboración en y entre los Sectores Público y Privado
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Modelling for the continuous production of bio-based phase change materials obtained from non-edible animal fat

  • Font Prieur, Daylen Yara
  • Escribà i Gelonch, Marc
  • López Bastida, Eduardo Julio
  • Cabeza, Luisa F.
This study presents the modelling and simulation of the production of phase change materials (PCM) from non-edible fats. To achieve this aim triacyl glycerides are sequentially hydrolysed in the presence of sodium hydroxide, followed by an acidification with sulfuric acid for sodium extraction in continuous flow. The process is modelled with Aspen Plus framework using a plug-low reactor (PFR). The primary objective is to develop a scalable model that enables the optimization of PCM production from animal fat through computational simulation. The proposed model operates under continuous flow conditions, making it particularly suitable for industrial applications. To assess its accuracy and applicability, the simulation results are systematically compared with experimental data, achieving a correlation coefficient (R2) of 0.98, indicating an excellent fit with actual values. Plug-flow reactors are commonly used in industry due to their ideal axial non-mixing characteristics, which minimize back −mixing and support high conversion rates with low byproduct formation due to process intensification (Novel Process Windows). The simulation is based on non-random two-liquid thermodynamic model to accurately mimic the system behaviour. This study provides a useful tool for understanding the sequential reaction kinetics PFR reactors, to be used for future applications in the production of biomass-based PCM., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement THUMBS UP (101096921). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme and Serra Hunter programme. This work was also partially funded by Ministerio de Ciencia e Innovaci´ on - Agencia Estatal de Investigaci´ on (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER) UE), and by Ministerio de Ciencia, Innovaci´ on y Universidades - Agencia Estatal de Investigaci´ on (AEI) (RED2024-153629-T)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Ús de la intel·ligència artificial per la simulació de dipòsits d’emmagatzematge d’energia tèrmica

  • Rojas Cala, Edgar Felipe
Els tancs d'emmagatzematge d'energia tèrmica (TES en anglès) són com bateries que guarden energia en forma de calor. Durant el seu disseny, els tancs TES poden ser modelats computacionalment per conèixer la serva eficàcia i si es comporten com es desitja; el procés de simulació pot ser costós i requerir moltes hores de treball addicional. Per a això, proposem entrenar una intel·ligència artificial (IA) capaç de fer simulació computacional de tancs TES, reduint els costos i el temps implicat en aquest procés., Aquest treball està parcialment finançat pel Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-I00 – MCIN/AEI/10.13039/501100011033/FEDER, UE), el Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2022-139835NB-C22 – MCIN/AEI/10.13039/501100011033/FEDER, UE), el Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2023-152814OB-I00 – MCIN/AEI/10.13039/501100011033/FEDER, UE) i el Ministerio de Ciencia e Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2024-153629-T). Els autors agraeixen a la Generalitat de Catalunya l’acreditació de qualitat concedida al grup de recerca GREiA (2021 SGR 01615). GREiA és un agent certificat TECNIO en la categoria de desenvolupadors tecnològics de la Generalitat de Catalunya. Aquest treball està parcialment secundat per ICREA dins del programa ICREA Academia. Edgar Freire Rojas també és agraït a: “Convocatòria 2023 d’Ajuts UdL per a la contractació de personal predoctoral en formació. Núm. Expedient: 2023 UdL 12”. Aquest projecte està cofinançat pel programa de recerca i innovació de la Unió Europea Horizon Europe dins del projecte NitRecercat2425 (GA 101162003).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Predicting state of charge in latent thermal energy storage systems using artificial intelligence modelling techniques

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Bastida, Hector
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
Accurate state of charge (SoC) estimation in latent thermal energy storage (latent TES) systems is critical for optimizing renewable energy integration and ensuring efficient energy storage operation. Traditional physics-based methods, though accurate, were computationally intensive and required complex parameter calibration, limiting their applicability for real-time applications. This study introduced an artificial intelligence (AI) framework for real-time SoC estimation in shell-and-tube latent TES systems, integrating long short-term memory recurrent neural networks (LSTM-RNN) and extreme gradient boosting (XGBoost) through an optimised weighted ensemble (0.3 LSTM-RNN, 0.7 XGBoost), with weights determined using grid search. The framework was trained and validated on 605 charging and discharging profiles from a previously experimentally validated model, significantly expanding prior studies. The dataset covered a broad range of operating conditions, including charging (140–150 °C) and discharging (100–110 °C) cycles with mass flow rates between 0.8 and 1.2 kg/s. The ensemble model achieved superior accuracy (RMSE: 1.7%, MAE: 0.9%, R2 >99.7% for charging; RMSE: 1.4%, MAE: 0.8%, R2 >99.8% for discharging) compared to individual LSTM-RNN and XGBoost models, while reducing computational costs by 80%, enabling inference within 2.6 ms per sample. This significant reduction in computational requirements transforms SoC estimation from a computational bottleneck into an enabling technology for real-time control integration, allowing direct deployment in industrial control systems where traditional physics-based methods remain impractical due to their computational demands., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement COCOOL (101007976). This project was also funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This work was partially funded by the Ministerio de Ciencia e Innovacion ´ - Agencia Estatal de Investigacion ´ (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2024-153629-T). Professor A Sciacovelli also acknowledges the Novo Nordisk Foundation for the funding received (AI-LoDES, NNF25OC0100591)
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Scale-up of Nanoencapsulated Phase Change Material Slurry

  • López-Pedrajas, Daniel
  • Rodríguez, Juan F.
  • Carmona, M.
  • Borreguero, Ana M.
The scale-up of the nanoencapsulated phase change material slurry (NPCS) production from lab scale (0.25 L reactor) to pilot plant scale (100 L reactor) has been carried out. The properties of the products obtained on these two scales remained almost unchanged. The long-term stability of the NPCS (pilot plant scale) was analyses by comparing the main properties after twenty months of storage time. The capsules maintained the nanometric size with a slight increase due to coalescence of them (dn0.5 = 75.0 nm just after preparation; dn0.5 = 87.3 nm at 20 months). The thermal storage capacity was also practically the same (𝛥𝐻𝐿= 46.1 J g-1 at the beginning; 𝛥𝐻𝐿=46.7 J g-1 at 20 months), as well as the colloidal stability (|ζ| changed from 54.2 to 47.9 mV after 20 months). Therefore, the scalability of the production process and the long-term stability of the NPCS is demonstrated, what is essential for being considered as an interesting solution to reduce fossil fuel dependence in the building sector., This work was supported by MCIU/AEI/10.13039/501100011033 due to the projects with references PID2021-123625OB-100 and RED2024-153629-T, the financial support from the European Regional Development Fund and the Regional Government of Castilla-La Mancha, project with reference SBPLY/21/180225/000082, and the fellowship for PhD studies (FPU16/02345) of Daniel Lopez-Pedrajas. Daniel Lopez-Pedrajas also must thanks to the European Union’s Next Generation funds, coordinated at the Spanish level by the Recovery, Transformation and Resilience Plan.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Numerical study of the melting/solidification process in a sphere filled with PCM for cold storage applications

  • Piqueras-Martínez, Enrique
  • Almendros-Ibáñez, José Antonio
  • Córcoles, Juan Ignacio
This work presents a numerical study of the heat transfer in a melting/solidification process in a sphere (4 cm i.d.) filled with PCM (savE OM08 PCM) for cold thermal energy storage. The numerical model, implemented in the commercial code Ansys Workbench v. 2020 R2, has been validated with experimental data from the literature. The main results indicate that the melting time varies between 14 and 58 min for wall temperatures between 10 ºC and 20 ºC. Longer times are required for solidification., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Assessment of the transient thermal response of lightweight aggregate mortars with vacuum-incorporated PCMs

  • Alvarez-Rodriguez, Matias
  • Silva, Luis Tomas
  • Alonso-Martinez, Mar
  • Suarez-Ramon, Ines
Lightweight aggregate mortars (LWAM) incorporating phase change materials (PCMs) were produced using two vacuum-based techniques: impregnation of prefabricated samples and pre-impregnation of lightweight aggregates. Two PCMs with similar phase change properties but different viscosities were used. Results show that PCM viscosity strongly influences the amount of PCM incorporated, leading to significant differences between both methods. Pre-impregnation of aggregates enabled higher PCM content, particularly for the low-viscosity PCM. Transient thermal tests revealed an increased thermal inertia for PCM-containing mortars, with the transient thermal response depending on both the incorporation route and the PCM content. When sufficiently high PCM contents are achieved, a uniform distribution within the aggregates proved more effective than a superficial PCM layer in enhancing thermal inertia., This work was supported by the Spain Ministry of Universities (FPU21/05062); Spain Ministry of Science, Innovation, and Universities (RED2024-153629-T); and Asturian Agency for Science, Business Competitiveness, and Innovation – SEKUENS (IDE/2024/000732). The authors thank CRODA International Plc. for the materials provided for this study.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Life cycle analysis for thermal energy storage systems

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Mani Kala, Saranprabhu
  • Escribà i Gelonch, Marc
Thermal energy storage systems help to reduce the environmental impact of heating in Europe. New, more efficient materials are being developed, as current materials lose performance with use. Life cycle assessment (LCA) needs to be applied to measure the energy required, the environmental impact and the cost of these new materials. The aim is to select the most environmentally friendly and efficient materials to move towards clean and sustainable heating in Europe., This project was funded by the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 101007976. This work was also partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-I00 – MCIN/AEI/10.13039/501100011033/FEDER, UE) and the Ministerio de Ciencia e Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2024-153629-T). This work is also partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to the research group (2021 SGR 01615). GREiA is a certified TECNIO agent in the category of technology developers of the Government of Catalonia. This project is also co-funded by the European Union’s research and innovation programme Horizon Europe under the project NitRecercat2425 (GA 101162003).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Estimation of solar absorptivity through color quantification for CSP solid particles

  • Cerutti-Cristaldo, Leonel Mario
  • Flores-Ríos, Paula María
  • Díaz-Heras, Minerva
  • Hernández-López, Leonor
  • Almendros-Ibáñez, José Antonio
This study evaluates cost-effective colorimetric alternatives to broad-spectrum spectrophotometry for characterizing CSP solar absorptivity. Using a visible-range spectrometer, three indicators were tested: the visible solar absorptivity (𝛼𝑉𝐼𝑆), lightness (L), and distance to the ideal black point (Δ𝐶). Results for various achromatic materials showed high reliability, with 𝛼𝑉𝐼𝑆 yielding 𝑅2=0.985. Colorimetric parameters performed similar, with a 𝑅2=0.981. While specular materials like SiC introduce geometric measurement errors, the findings confirm that CIELab quantification is a highly accurate, high-throughput screening tool for neutral-colored CSP materials., This work was partially funded by the project PID2024-159711OB-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain, grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain and CIPROM/ 2023/44 funded by Generalitat Valenciana.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Thermal performance characterisation of a bulk PCM tank for cold thermal energy storage

  • Alfaro-López, Miguel Á.
  • Belmonte, Juan F.
  • Almendros-Ibáñez, José A.
The projected growth in building cooling demand and its impact on peak electricity demand has highlighted the need for advanced energy management strategies. Thermal energy storage offers a promising approach through load shifting, while Phase Change Materials (PCM) are attractive due to their high energy density. This study presents preliminary experimental results on the characterisation of a bulk PCM tank for cold storage containing 322 kg of the commercial inorganic PCM SP12SK. Tank performance was evaluated in terms of temperature distribution and stored energy capacity through solidification and melting tests at three inlet temperature differences respect melting point (T = 4, 6 and 8ºC). The results show that nearly 90% of the theoretical storage capacity is reached, with stored and released energies between 9.3 and 14.4 kWh, confirming the strong potential of bulk inorganic PCM systems for cold storage., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain. This work has been carried out as part of the predoctoral contract 2024-UNIVERS-12844 at the University of Castilla-La Mancha (UCLM), funded by the European Union through the European Social Fund Plus (FSE+).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

A systematic benchmark of thermal energy storage schemes in concentrating solar power applications

  • Tagle-Salazar, Pablo
  • Cabeza, Luisa F.
  • López-Román, Anton
  • Prieto, Cristina
Thermal energy storage (TES) plays a crucial role in enhancing the efficiency and reliability of concentrating solar power (CSP) plants by mitigating the intermittent nature of solar energy. Although molten salts are the predominant TES solution, alternative systems such as solid-state and latent heat storage offer promising advantages. This study investigated the impact of three TES technologies, namely two-tank molten salt, concrete-based storage, and phase change materials (PCMs), on the performance of CSP systems. By assessing the key performance indicators on an annual timescale and under identical operating conditions, this study elucidates the suitability of each TES technology for CSP plant operations. All three concepts demonstrated comparable performance at both the system and TES levels, with differences of less than 3%. The advantage of PCM lies in its substantial volume reduction of approximately 27% compared to molten salt, whereas concrete TES achieves similar results with a slight increase in volume relative to the molten salt TES., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033 and FSE+) (PID2024-156068OB-C21 and PID2024-156068OB-C22).). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of cascade finned shell and tube TES tanks with organic phase change materials

  • Megra, Kassahun Tadesse
  • Mani Kala, Saranprabhu
  • Peccolo, Simone
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
Latent heat thermal energy storage (TES) systems using phase change materials (PCMs) are promising for mitigating renewable energy intermittency and improving waste heat recovery, due to their high energy density and near-constant operating temperature. To increase energy storage capacity, PCMs can operate beyond their melting point, but this induces thermal stress. Cascade TES systems overcome these issues by using multiple PCMs with different melting points and enable multilevel energy utilisation. A custom-built experimental setup is used to investigate the charging and discharging characteristics of a three-stage cascade TES system using organic PCMs in finned shell and tube TES tanks. The results show that cascade systems can be effectively integrated over a wide temperature range, storing a higher energy than single stage systems., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+. This work is also Funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Performance benchmark of thermal energy storage concepts in concentrating solar power

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
Thermal energy storage (TES) plays a critical role in enhancing the efficiency and dispatchability of concentrating solar power (CSP) plants by mitigating solar energy intermittency. Although molten salts remain the dominant TES solution, alternative systems such as solid-state and latent heat storage offer promising advantages. This study analyses the performance impact of different TES technologies—two-tank molten salt, concrete-based storage, and phase change materials (PCMs)—when integrated into CSP systems. By comparing key performance indicators under identical operating conditions, this study provides insights into the suitability of each TES technology for CSP plant operations. The results highlight the trade-offs between energy yield, efficiency, and footprint. All three concepts demonstrated comparable performance at both the system and TES levels, with disparities of less than 3 %. The advantage of PCM lies in its substantial volume reduction of approximately 27 % compared to molten salt, whereas concrete TES achieves similar outcomes with a slight increase in volume relative to molten salt TES volume., This project was funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033 and FSE+) (PID2024-156068OB-C21). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Proyecto fin de carrera (BachelorThesis)

Disseny termo-mecànic d’un tanc d’emmagatzematge d’energia térmica amb criteris biomimètics

  • Risco Amigó, Sara
L’ús dels materials de canvi de fase (PCM) com medi per l’emmagatzematge d’energia tèrmica (TES) consagren aquesta tecnologia com una solució eficient i fiable per la gestió de l’energia tèrmica. Aquest requisit és molt important en moltes aplicacions on la demanda energètica i el consum energètic no coincideixen en el temps. Però, molts PCM presenten una baixa conductivitat tèrmica, fet que dificulta la propagació de la calor cap a les zones més llunyades del seu volum. Per tal de millorar la transferència de calor entre el fluid caloportador (HTF), en aquest cas aigua, i el PCM, aquest Treball de Final de Grau proposa una idea de concepte de disseny d’un dipòsit TES de calor latent inspirat en la natura (BioTES) que, una vegada materialitzat amb fabricació additiva, es valida mitjançant l’avaluació experimental en un banc d’assaig personalitzat. Una vegada detectades les limitacions en la distribució del flux en el primer concepte de dipòsit amb orientació vertical, es planteja la redistribució de la geometria interna, a més d’un canvi d’orientació i l’augment de l’àrea efectiva de la superfície d’intercanvi d’energia tèrmica. A més, els resultats de simulacions de dinàmica de fluids (CFD) realitzades per l’empresa externa ANALISIS-DSC, soci del projecte SUSHEAT, mostren que aquest redisseny afavoreix una distribució mñes homogènia del HTF respecte la configuració vertical (ANALISIS-DSC, n.d.). Els resultats experimentals realitzats amb PCM inorgànic han permès comparar el rendiment energètic entre les configuracions dissenyades i un dipòsit TES de carcassa i tubs. Per una banda, el BioTES horitzontal, completa els processos de càrrega i descàrrega aproximadament en 0,30 h i 1,45 h, respectivament. Aquests valors representen una reducció del temps fins a un 41% en la càrrega i un 40% en la descàrrega respecte als sistemes TES de calor latent analitzats. A més, presenta una millor relació entre l’energia útil emmagatzemada o alliberada i la velocitat a la qual es produeix aquest procés. En conjunt, l’evolució des de l’estructura ramificada, jeràrquica i recursiva del BioTES vertical fins a una geometria tridimensional més distribuïda en el BioTES horitzontal, dona com a resultat l’optimització de l’estructura de la xarxa de distribució assolint una millor homogeneïtzació del fluid caloportador. Així, s’estableix una base per al desenvolupament de futures configuracions bioinspirades més eficients., The use of phase change materials (PCMs) as a medium for thermal energy storage (TES) establishes this technology as an efficient and reliable solution for thermal energy management. This requirement is particularly important in applications where energy demand and energy consumption do not coincide in time. However, many PCMs exhibit low thermal conductivity, which hinders heat propagation to regions farther from the heat-transfer surface. Therefore, to improve heat transfer between the heat transfer fluid (HTF)—in this study, water—and the PCM, this Bachelor's Final Project proposes a design concept for a nature-inspired latent heat storage TES tank. Once manufactured using additive manufacturing, the proposed concept is validated through experimental evaluation on a custom-built test bench. After identifying limitations in flow distribution in the first vertically oriented tank concept, the internal geometry was redistributed, the System orientation was modified, and the effective heat-transfer surface area was increased. In addition, computational fluid Dynamics (CFD) simulation results obtained by ANALISIS-DSC, a partner of SUSHEAT projetc, show that this redesign promotes a more homogeneous Distribution of the HTF compared with the vertical configuration (ANALISIS-DSC, n.d.). The experimental results obtained with inorganic PCM enabled the energy performance of the designed configurations to be compared with that of a shelland-tube TES tank. On the one hand, the horizontal BioTES completes the charging and discharging processes in approximately 0,30 h and 1,45 h, respectively. These values represent reductions of up to 41% in charging time and 40% in discharging time compared with the latent heat TES systems analyzed. Moreover, it offers a better ratio of useful energy stored or released to the rate at which this process occurs. Overall, the transition from the branched, hierarchical, and recursive structure of the vertical BioTES to a more distributed, three-dimensional geometry in the horizontal BioTES results in an optimized distribution network, achieving a more homogeneous distribution of the heat-transfer fluid. Thus, this work establishes a basis for the development of more efficient future bio-inspired configurations., This study has received funding from the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No.101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. 2 Aquest treball ha estat finançat pel Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021 – 123511OB-C31 – MCIN/AEI/ 10.13039/501100011033/FEDER, UE). Aquest treball ha estat finançat pel Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). Finalment, agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2021 SGR 01615) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

A stochastic thermo-economic analysis of thermal energy storage for cooling and heating load shifting in residential buildings in Spain

  • Alfaro-López, Miguel Á.
  • Ramírez, Francisco J.
  • Belmonte, Juan F.
  • Almendros-Ibáñez, José A.
Residential electricity demand and peak loads are expected to increase, highlighting the need for advanced demand-side management strategies. Thermal energy storage enables load shifting to off-peak periods and may reduce operating costs. This study presents a stochastic thermo-economic assessment of integrating a water storage tank into the heating and cooling system of a high-rise residential building in two Spanish climates. TRNSYS simulations were combined with deterministic and stochastic economic analyses, using Monte Carlo simulations. TES achieved cooling electricity savings of up to 13%, although annual electricity consumption increased by around 10% due to storage heat losses. Despite this, operating costs were reduced by up to 21%, with slightly better economic indicators in the colder climates. However, the moderate profitability suggests that further optimisation is required to enhance overall economic feasibility., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain. This work has been carried out as part of the predoctoral contract 2024-UNIVERS-12844 at the University of Castilla-La Mancha (UCLM), funded by the European Union through the European Social Fund Plus (FSE+).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Enhancing Solar District Energy System Performance via Advanced Thermal Storage Modelling and Multi-Objective Optimization

  • Kotegov, Ruslan
  • Chaabane, Hamza
  • Marín, Marc
  • Abokersh, Mohamed
  • Mateu Piñol, Carles
  • Shobo, Adedamola
  • Boer, Dieter
  • Vallés, Manel
This work presents a fully automated TRNSYS-Python framework for optimizing Solar District Energy Systems under realistic operating conditions. Applied to a residential case in Falset (Spain), the method evaluates configurations integrating solar thermal collectors, PV panels, heat pumps, batteries, and thermal energy storage. Results show that coordinated use of a seasonal storage tank and a DHW tank enables strong seasonal balancing, with space-heating solar fractions of 97.6% and global solar fractions of 82.5-91%. The approach identifies designs that minimize life-cycle cost and environmental impact without relying on surrogate models, demonstrating that properly sized thermal storage is essential for achieving high solar penetration and reducing reliance on fossil fuels., The authors acknowledge financial support from the Ministry of Science, Innovation and Universities of Spain (MICIU/AEI) through Grant PID2024-155409OB-C2 (co-funded by ERDF, EU; DOI: 10.13039/501100011033) and project RED2024-153629-T, as well as projects PID2021-127713OA-I00, PID2021-123511OB-C31, and PID2021-123511OB-C33. Additional support was provided by the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR), Generalitat de Catalunya, under grant 2024 FISDU 00027.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Insights into the Creep Behavior of AISI 347H Stainless Steel in Molten Nitrate Salts

  • Ardila-Parra, Sergio
  • Osorio, Julián
  • Prieto, Cristina
  • Fernández Renna, Ana Inés
This study examines the tensile and creep properties of AISI 347H stainless steel when in direct contact with molten nitrate salts at elevated temperatures. A specialized experimental apparatus was designed to conduct mechanical tests under conditions of molten salt exposure, while simultaneously applying a thermal gradient along the specimen. Tensile tests conducted at 560 °C demonstrated a notable decrease in the yield strength compared to values obtained at room temperature. Creep tests indicated that deformation and rupture are predominantly influenced by the hottest section of the specimen. A segmented interpretation approach is introduced to analyze the creep behavior under non-uniform temperature conditions. The findings offer experimental insights pertinent to the structural materials employed in concentrated solar power (CSP) and thermal energy storage systems., The authors would like to thank the Grant PID2021-123511OB-C31, PID2021-123511OB-C32 and Grant RED2024-153629-T funded by MCIU/AEI/ 10.13039/501100011033 and FEDER, UE. This work was authored in part by the NREL, operated by Alliance for Sustainable Energy, LLC, for the U. S. Department of Energy (DOE) under Contract No. DE-AC36- 08GO28308. Partial support was provided by the U.S. DOE – Solar Energy Technologies Office (SETO) under the agreement 52729 – “Addressing Failures in Molten Nitrate Thermal Energy Storage Tanks Through the Design and Fabrication Optimization of the Tank Floor and Experimental Validation.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Metal alloy phase change material for thermal energy storage systems: characterization and compatibility studies

  • Mani Kala, Saranprabhu
  • Wolf, Gerhar
  • Borri, Emiliano
  • Reinholz, Jonas
  • Kugler, Felix
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) as an energy storage medium offer several advantages; however, drawbacks appear when employing inorganic PCM, including low thermal conductivity and corrosion issues. In this study, a ZnAl6 metal alloy PCM was selected, and its potential for use in TES systems was explored. The thermophysical properties of the metal alloy were measured, including latent heat, melting point, solidification point, and degradation temperature. The metal alloy PCM was further evaluated for its compatibility with a stainless-steel tube by subjecting it to thermal cycling in a furnace, encompassing 1,000 cycles between its melting and solidification temperatures. FeAl phases were observed to form at the junction near the stainless-steel tube in contact with the PCM. Furthermore, the ZnAl6 eutectic composition remained stable even after 1000 thermal cycles., This research was funded by the German Ministry of Education and Research under grant no. 03SF0541 and the CETPartnership, the Clean Energy Transition Partnership is a transnational joint programming initiative to boost and accelerate the energy transition, building upon regional and national RDI funding programmes. The initiative is receiving funding from the European Union’s research and innovation programme “Horizon Europe” under grant agreement No 101069750. This paper is part of the PID2024-156068OB-C21 and RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is also funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T).Also, this work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Evaluation of the corrosion of metal-based containers in contact with molten salts at high temperature under inert atmosphere

  • Cabeza, Luisa F.
  • Martínez Alcocer, F. Rodrigo
  • Borri, Emiliano
  • Mani Kala, Saranprabhu
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
The reliable deployment of high-temperature thermal energy storage (TES) systems in concentrated solar power (CSP) plants requires an accurate assessment of material compatibility under realistic operating conditions. However, conventional corrosion testing in air atmosphere does not adequately represent the inert environments typically used in TES tanks, potentially leading to overly conservative material selection. This study experimentally evaluates the corrosion behaviour of PCM–metal wool composite materials under inert atmosphere conditions representative of CSP operation. Sixteen molten salt formulations, including nitrate-, carbonate-, chloride-, and sulphate-based systems, were tested in contact with metallic fibres and structural alloys (SS 314, SS 434, and Alloy 20) over a wide temperature range. The results demonstrate that inert atmosphere significantly alters material compatibility. Several PCM formulations that previously failed under air conditions exhibit acceptable behaviour under inert atmosphere, highlighting the limitations of conventional testing approaches. Nitrate- and carbonate-based systems operating between 300 and 500 °C show good compatibility with conventional alloys, whereas chloride-rich systems above 500 °C remain highly corrosive regardless of the atmosphere. These findings define a clear operational window for safe material selection. Importantly, the incorporation of metallic wool as a conductive matrix does not introduce additional corrosion penalties within this window, supporting the feasibility of PCM–metal wool composites for enhanced TES performance. This work provides experimental validation of TES materials under representative conditions and demonstrates that inert atmosphere is a critical factor for realistic material qualification in CSP applications., This study was partially funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovacion ´ - Agencia Estatal de Investigacion ´ (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/ 501100011033/FEDER, UE). Funded by Ministerio de Ciencia e Innovacion ´ y Universidades - Agencia Estatal de Investigacion ´ (MICIU/ AEI /10.13039/501100011033) (RED2024-153629-T, PID2024- 156068OB-C21, PID2024-156068OB-C22). This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE + . This work is partially supported by ICREA under the ICREA Academia and Serra Hunter programmes. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Síntesis de materiales de cambio de fase para almacenamiento de energía a partir de residuos agroindustriales

  • Font Prieur, Daylen Yara
Se estudia el uso de ácidos grasos de origen animal como potenciales materiales de cambio de fase (PCM), para ser usados en almacenamiento energético en sistemas de construcción, calefacción solar y climatización, como una alternativa sostenible, alineada con los principios de la economía circular. En este estudio se evalúan las propiedades térmicas de las mezclas obtenidas por extracción y purificación de fracciones lipídicas no comestibles de pollo, cerdo, cordero y vaca, especies comúnmente utilizadas en la producción ganadera. Para su obtención, se emplea un proceso de extracción basado en hidrólisis y cristalización, optimizado para maximizar el rendimiento y la pureza de los compuestos obtenidos. Para que este proceso pueda utilizarse a nivel industrial, se realizan simulaciones por ordenador que mimetizan el proceso. Estas simulaciones permiten ajustar el uso de materiales, energía y tiempos de reacción, ayudando a hacer el proceso más eficiente y sostenible, sin necesidad de realizar experimentos costosos a nivel de planta piloto. Así, se da un paso importante hacia el aprovechamiento real de estos residuos como fuente de energía limpia., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia e Innovación – AEI (RED2024-153629-I). Los autores agradecen a la Generalitat de Catalunya la acreditación de calidad concedida al grupo de investigación GREiA (2021 SGR 01615). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos de la Generalitat de Catalunya. Este trabajo está parcialmente secundado por ICREA dentro del programa ICREA Academia. Este proyecto está cofinanciado por el programa de investigación e innovación de la Unión Europea Horizonte Europa dentro del proyecto NitRecercat2425 (GA 101162003).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Thermo-mechanical behaviour of steel , fibres reinforced refractory concrete for thermal energy storage applications

  • Alshouha, Abdelrahman
  • Castro Chicot, José Ramón
  • Zsembinszki, Gabriel
  • Mani Kala, Saranprabhu
  • Cabeza, Luisa F.
Based on a review and analysis of recent experimental studies on high-temperature concrete, this study investigates the performance of calcium aluminate concrete developed for sensible thermal energy storage applications. The primary aim of this research is to evaluate the effect of steel fibres on thermo-mechanical behaviour of both non-thermally treated and thermally treated calcium aluminate concrete. Two types of steel fibres were incorporated into the concrete mixtures, that is wavy low carbon steel fibres and wool stainless-steel fibres at varying dosages (0, 30, 50, and 75 kg/m³), to investigate their effect on physical, mechanical, and thermal performance of calcium aluminate concrete at high temperatures up to 700 °C. The results showed that both thermally treated and non-thermally treated concrete reinforced with wavy low carbon steel fibres experienced crack formation and subsequent degradation after 25 thermal cycles, leading to loss of compressive strength and matrix-fibres separation. In contrast, thermally treated concrete reinforced with wool stainless-steel fibres showed stability in retention of compressive strength after 25 thermal cycles. The influence of the steel fibres on the thermo-mechanical behaviour of refractory concrete allows the prediction of the failure mechanism of the composites., This project is part of the PID2024-156068OB-C21, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+, and Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). This project was partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Synthesis and characterization of bio-based ionic liquids to be used as phase change materials

  • Nahad, Mahya Nikoo
  • Font-Prieur, Daylen Y.
  • Escribà i Gelonch, Marc
  • Cabeza, Luisa F.
This study investigates the synthesis of a bio-based ionic liquids (ILs) from waste biomass, as potential phase change materials to be used for thermal energy storage. The reaction path includes two-stage scalable synthetic pathway, achieving 96% yield in the first and an overall yield of 80% on the second stage. The methodology was statistically validated, achieving an average intermediate conversion of 96% with high repeatability. Rection pathways and kinetics were monitored using 1H-NMR spectroscopy. The bio-based ionic liquids developed in this study represent promising candidates for thermal energy storage applications, offering the dual advantages of inherent sustainability and a molecular design, optimized for high latent heat capacity and cost-effective production., This work has received funding from the Ministerio de Ciencia, Innovación y Universidades and the Agencia Estatal de Investigación (Action CNS2024-154421 funded by MICIU/AEI/10.13039/501100011033). This work is partially supported by ICREA under the ICREA Academia programme. This work was also partially funded by the Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Thermal conductivity of phase change materials in solid state at high temperature

  • Mani Kala, Saranprabhu
  • Ribezzo, Alessandro
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
The portfolio of phase change material (PCM) candidates available for high temperature applications that are fully characterized in the solid-phase within these elevated temperature ranges is limited. In this study, 11 PCM candidates—previously proposed for high-temperature applications—were experimentally characterized in terms of solid-phase thermal conductivity at both room (20 °C) and high temperature (300 °C). The results revealed a substantial and general decrease in solid-phase thermal conductivity with increasing temperature, highlighting the importance of conducting thermal characterization at high temperature. These PCM candidates were subsequently compared with the few PCMs reported in the literature for similar applications and characterized within the same temperature ranges, by considering the solid-phase thermal conductivity analyzed in study, as well as the melting temperature and latent heat obtained from a previous study. Thanks to this, a comprehensive comparative map of PCM candidates fully characterized in the solid state at high temperature was finally presented (≥300 °C)., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement HYBRIDplus (101084182). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. “This work was partially funded by the Ministerio de Ciencia e Innovaci´ on - Agencia Estatal de Investigaci´ on (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE)”. This paper is part of the RYC2023- 044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is part of the PID2024-156068OB-C21 and PID2024- 156068OB-C22, funded by Ministerio de Ciencia e Innovaci´ on y Universidades - Agencia Estatal de Investigaci´ on MICIU/AEI/10.13039/ 501100011033 and FSE+. Funded by Ministerio de Ciencia e Innovaci´ on y Universidades - Agencia Estatal de Investigaci´ on (MICIU/ AEI/10.13039/501100011033) (RED2024-153629-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Assessment of the transient thermal response of lightweight aggregate mortars with vacuum-incorporated PCMs

  • Alvarez-Rodriguez, Matias
  • Silva, Luis Tomas
  • Alonso-Martinez, Mar
  • Suarez-Ramon, Ines
Lightweight aggregate mortars (LWAM) incorporating phase change materials (PCMs) were produced using two vacuum-based techniques: impregnation of prefabricated samples and pre-impregnation of lightweight aggregates. Two PCMs with similar phase change properties but different viscosities were used. Results show that PCM viscosity strongly influences the amount of PCM incorporated, leading to significant differences between both methods. Pre-impregnation of aggregates enabled higher PCM content, particularly for the low-viscosity PCM. Transient thermal tests revealed an increased thermal inertia for PCM-containing mortars, with the transient thermal response depending on both the incorporation route and the PCM content. When sufficiently high PCM contents are achieved, a uniform distribution within the aggregates proved more effective than a superficial PCM layer in enhancing thermal inertia., This work was supported by the Spain Ministry of Universities (FPU21/05062); Spain Ministry of Science, Innovation, and Universities (RED2024-153629-T); and Asturian Agency for Science, Business Competitiveness, and Innovation – SEKUENS (IDE/2024/000732). The authors thank CRODA International Plc. for the materials provided for this study.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Predicting state of charge in latent thermal energy storage systems using artificial intelligence modelling techniques

  • Mehraj, Nadiya
  • Mateu Piñol, Carles
  • Zsembinszki, Gabriel
  • Bastida, Hector
  • Sciacovelli, Adriano
  • Cabeza, Luisa F.
Accurate state of charge (SoC) estimation in latent thermal energy storage (latent TES) systems is critical for optimizing renewable energy integration and ensuring efficient energy storage operation. Traditional physics-based methods, though accurate, were computationally intensive and required complex parameter calibration, limiting their applicability for real-time applications. This study introduced an artificial intelligence (AI) framework for real-time SoC estimation in shell-and-tube latent TES systems, integrating long short-term memory recurrent neural networks (LSTM-RNN) and extreme gradient boosting (XGBoost) through an optimised weighted ensemble (0.3 LSTM-RNN, 0.7 XGBoost), with weights determined using grid search. The framework was trained and validated on 605 charging and discharging profiles from a previously experimentally validated model, significantly expanding prior studies. The dataset covered a broad range of operating conditions, including charging (140–150 °C) and discharging (100–110 °C) cycles with mass flow rates between 0.8 and 1.2 kg/s. The ensemble model achieved superior accuracy (RMSE: 1.7%, MAE: 0.9%, R2 >99.7% for charging; RMSE: 1.4%, MAE: 0.8%, R2 >99.8% for discharging) compared to individual LSTM-RNN and XGBoost models, while reducing computational costs by 80%, enabling inference within 2.6 ms per sample. This significant reduction in computational requirements transforms SoC estimation from a computational bottleneck into an enabling technology for real-time control integration, allowing direct deployment in industrial control systems where traditional physics-based methods remain impractical due to their computational demands., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement COCOOL (101007976). This project was also funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No. 101096921 (THUMBS UP). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This work was partially funded by the Ministerio de Ciencia e Innovacion ´ - Agencia Estatal de Investigacion ´ (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2024-153629-T). Professor A Sciacovelli also acknowledges the Novo Nordisk Foundation for the funding received (AI-LoDES, NNF25OC0100591)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of the corrosion of metal-based containers in contact with molten salts at high temperature under inert atmosphere

  • Cabeza, Luisa F.
  • Martínez Alcocer, F. Rodrigo
  • Borri, Emiliano
  • Mani Kala, Saranprabhu
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
The reliable deployment of high-temperature thermal energy storage (TES) systems in concentrated solar power (CSP) plants requires an accurate assessment of material compatibility under realistic operating conditions. However, conventional corrosion testing in air atmosphere does not adequately represent the inert environments typically used in TES tanks, potentially leading to overly conservative material selection. This study experimentally evaluates the corrosion behaviour of PCM–metal wool composite materials under inert atmosphere conditions representative of CSP operation. Sixteen molten salt formulations, including nitrate-, carbonate-, chloride-, and sulphate-based systems, were tested in contact with metallic fibres and structural alloys (SS 314, SS 434, and Alloy 20) over a wide temperature range. The results demonstrate that inert atmosphere significantly alters material compatibility. Several PCM formulations that previously failed under air conditions exhibit acceptable behaviour under inert atmosphere, highlighting the limitations of conventional testing approaches. Nitrate- and carbonate-based systems operating between 300 and 500 °C show good compatibility with conventional alloys, whereas chloride-rich systems above 500 °C remain highly corrosive regardless of the atmosphere. These findings define a clear operational window for safe material selection. Importantly, the incorporation of metallic wool as a conductive matrix does not introduce additional corrosion penalties within this window, supporting the feasibility of PCM–metal wool composites for enhanced TES performance. This work provides experimental validation of TES materials under representative conditions and demonstrates that inert atmosphere is a critical factor for realistic material qualification in CSP applications., This study was partially funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovacion ´ - Agencia Estatal de Investigacion ´ (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/ 501100011033/FEDER, UE). Funded by Ministerio de Ciencia e Innovacion ´ y Universidades - Agencia Estatal de Investigacion ´ (MICIU/ AEI /10.13039/501100011033) (RED2024-153629-T, PID2024- 156068OB-C21, PID2024-156068OB-C22). This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE + . This work is partially supported by ICREA under the ICREA Academia and Serra Hunter programmes. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A systematic benchmark of thermal energy storage schemes in concentrating solar power applications

  • Tagle-Salazar, Pablo
  • Cabeza, Luisa F.
  • López-Román, Anton
  • Prieto, Cristina
Thermal energy storage (TES) plays a crucial role in enhancing the efficiency and reliability of concentrating solar power (CSP) plants by mitigating the intermittent nature of solar energy. Although molten salts are the predominant TES solution, alternative systems such as solid-state and latent heat storage offer promising advantages. This study investigated the impact of three TES technologies, namely two-tank molten salt, concrete-based storage, and phase change materials (PCMs), on the performance of CSP systems. By assessing the key performance indicators on an annual timescale and under identical operating conditions, this study elucidates the suitability of each TES technology for CSP plant operations. All three concepts demonstrated comparable performance at both the system and TES levels, with differences of less than 3%. The advantage of PCM lies in its substantial volume reduction of approximately 27% compared to molten salt, whereas concrete TES achieves similar results with a slight increase in volume relative to the molten salt TES., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033 and FSE+) (PID2024-156068OB-C21 and PID2024-156068OB-C22).). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Enhancing Solar District Energy System Performance via Advanced Thermal Storage Modelling and Multi-Objective Optimization

  • Kotegov, Ruslan
  • Chaabane, Hamza
  • Marín, Marc
  • Abokersh, Mohamed
  • Mateu Piñol, Carles
  • Shobo, Adedamola
  • Boer, Dieter
  • Vallés, Manel
This work presents a fully automated TRNSYS-Python framework for optimizing Solar District Energy Systems under realistic operating conditions. Applied to a residential case in Falset (Spain), the method evaluates configurations integrating solar thermal collectors, PV panels, heat pumps, batteries, and thermal energy storage. Results show that coordinated use of a seasonal storage tank and a DHW tank enables strong seasonal balancing, with space-heating solar fractions of 97.6% and global solar fractions of 82.5-91%. The approach identifies designs that minimize life-cycle cost and environmental impact without relying on surrogate models, demonstrating that properly sized thermal storage is essential for achieving high solar penetration and reducing reliance on fossil fuels., The authors acknowledge financial support from the Ministry of Science, Innovation and Universities of Spain (MICIU/AEI) through Grant PID2024-155409OB-C2 (co-funded by ERDF, EU; DOI: 10.13039/501100011033) and project RED2024-153629-T, as well as projects PID2021-127713OA-I00, PID2021-123511OB-C31, and PID2021-123511OB-C33. Additional support was provided by the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR), Generalitat de Catalunya, under grant 2024 FISDU 00027.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A stochastic thermo-economic analysis of thermal energy storage for cooling and heating load shifting in residential buildings in Spain

  • Alfaro-López, Miguel Á.
  • Ramírez, Francisco J.
  • Belmonte, Juan F.
  • Almendros-Ibáñez, José A.
Residential electricity demand and peak loads are expected to increase, highlighting the need for advanced demand-side management strategies. Thermal energy storage enables load shifting to off-peak periods and may reduce operating costs. This study presents a stochastic thermo-economic assessment of integrating a water storage tank into the heating and cooling system of a high-rise residential building in two Spanish climates. TRNSYS simulations were combined with deterministic and stochastic economic analyses, using Monte Carlo simulations. TES achieved cooling electricity savings of up to 13%, although annual electricity consumption increased by around 10% due to storage heat losses. Despite this, operating costs were reduced by up to 21%, with slightly better economic indicators in the colder climates. However, the moderate profitability suggests that further optimisation is required to enhance overall economic feasibility., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain. This work has been carried out as part of the predoctoral contract 2024-UNIVERS-12844 at the University of Castilla-La Mancha (UCLM), funded by the European Union through the European Social Fund Plus (FSE+).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Insights into the Creep Behavior of AISI 347H Stainless Steel in Molten Nitrate Salts

  • Ardila-Parra, Sergio
  • Osorio, Julián
  • Prieto, Cristina
  • Fernández Renna, Ana Inés
This study examines the tensile and creep properties of AISI 347H stainless steel when in direct contact with molten nitrate salts at elevated temperatures. A specialized experimental apparatus was designed to conduct mechanical tests under conditions of molten salt exposure, while simultaneously applying a thermal gradient along the specimen. Tensile tests conducted at 560 °C demonstrated a notable decrease in the yield strength compared to values obtained at room temperature. Creep tests indicated that deformation and rupture are predominantly influenced by the hottest section of the specimen. A segmented interpretation approach is introduced to analyze the creep behavior under non-uniform temperature conditions. The findings offer experimental insights pertinent to the structural materials employed in concentrated solar power (CSP) and thermal energy storage systems., The authors would like to thank the Grant PID2021-123511OB-C31, PID2021-123511OB-C32 and Grant RED2024-153629-T funded by MCIU/AEI/ 10.13039/501100011033 and FEDER, UE. This work was authored in part by the NREL, operated by Alliance for Sustainable Energy, LLC, for the U. S. Department of Energy (DOE) under Contract No. DE-AC36- 08GO28308. Partial support was provided by the U.S. DOE – Solar Energy Technologies Office (SETO) under the agreement 52729 – “Addressing Failures in Molten Nitrate Thermal Energy Storage Tanks Through the Design and Fabrication Optimization of the Tank Floor and Experimental Validation.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling for the continuous production of bio-based phase change materials obtained from non-edible animal fat

  • Font Prieur, Daylen Yara
  • Escribà i Gelonch, Marc
  • López Bastida, Eduardo Julio
  • Cabeza, Luisa F.
This study presents the modelling and simulation of the production of phase change materials (PCM) from non-edible fats. To achieve this aim triacyl glycerides are sequentially hydrolysed in the presence of sodium hydroxide, followed by an acidification with sulfuric acid for sodium extraction in continuous flow. The process is modelled with Aspen Plus framework using a plug-low reactor (PFR). The primary objective is to develop a scalable model that enables the optimization of PCM production from animal fat through computational simulation. The proposed model operates under continuous flow conditions, making it particularly suitable for industrial applications. To assess its accuracy and applicability, the simulation results are systematically compared with experimental data, achieving a correlation coefficient (R2) of 0.98, indicating an excellent fit with actual values. Plug-flow reactors are commonly used in industry due to their ideal axial non-mixing characteristics, which minimize back −mixing and support high conversion rates with low byproduct formation due to process intensification (Novel Process Windows). The simulation is based on non-random two-liquid thermodynamic model to accurately mimic the system behaviour. This study provides a useful tool for understanding the sequential reaction kinetics PFR reactors, to be used for future applications in the production of biomass-based PCM., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement THUMBS UP (101096921). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme and Serra Hunter programme. This work was also partially funded by Ministerio de Ciencia e Innovaci´ on - Agencia Estatal de Investigaci´ on (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER) UE), and by Ministerio de Ciencia, Innovaci´ on y Universidades - Agencia Estatal de Investigaci´ on (AEI) (RED2024-153629-T)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical study of the melting/solidification process in a sphere filled with PCM for cold storage applications

  • Piqueras-Martínez, Enrique
  • Almendros-Ibáñez, José Antonio
  • Córcoles, Juan Ignacio
This work presents a numerical study of the heat transfer in a melting/solidification process in a sphere (4 cm i.d.) filled with PCM (savE OM08 PCM) for cold thermal energy storage. The numerical model, implemented in the commercial code Ansys Workbench v. 2020 R2, has been validated with experimental data from the literature. The main results indicate that the melting time varies between 14 and 58 min for wall temperatures between 10 ºC and 20 ºC. Longer times are required for solidification., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Metal alloy phase change material for thermal energy storage systems: characterization and compatibility studies

  • Mani Kala, Saranprabhu
  • Wolf, Gerhar
  • Borri, Emiliano
  • Reinholz, Jonas
  • Kugler, Felix
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) as an energy storage medium offer several advantages; however, drawbacks appear when employing inorganic PCM, including low thermal conductivity and corrosion issues. In this study, a ZnAl6 metal alloy PCM was selected, and its potential for use in TES systems was explored. The thermophysical properties of the metal alloy were measured, including latent heat, melting point, solidification point, and degradation temperature. The metal alloy PCM was further evaluated for its compatibility with a stainless-steel tube by subjecting it to thermal cycling in a furnace, encompassing 1,000 cycles between its melting and solidification temperatures. FeAl phases were observed to form at the junction near the stainless-steel tube in contact with the PCM. Furthermore, the ZnAl6 eutectic composition remained stable even after 1000 thermal cycles., This research was funded by the German Ministry of Education and Research under grant no. 03SF0541 and the CETPartnership, the Clean Energy Transition Partnership is a transnational joint programming initiative to boost and accelerate the energy transition, building upon regional and national RDI funding programmes. The initiative is receiving funding from the European Union’s research and innovation programme “Horizon Europe” under grant agreement No 101069750. This paper is part of the PID2024-156068OB-C21 and RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is also funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T).Also, this work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermal conductivity of phase change materials in solid state at high temperature

  • Mani Kala, Saranprabhu
  • Ribezzo, Alessandro
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
The portfolio of phase change material (PCM) candidates available for high temperature applications that are fully characterized in the solid-phase within these elevated temperature ranges is limited. In this study, 11 PCM candidates—previously proposed for high-temperature applications—were experimentally characterized in terms of solid-phase thermal conductivity at both room (20 °C) and high temperature (300 °C). The results revealed a substantial and general decrease in solid-phase thermal conductivity with increasing temperature, highlighting the importance of conducting thermal characterization at high temperature. These PCM candidates were subsequently compared with the few PCMs reported in the literature for similar applications and characterized within the same temperature ranges, by considering the solid-phase thermal conductivity analyzed in study, as well as the melting temperature and latent heat obtained from a previous study. Thanks to this, a comprehensive comparative map of PCM candidates fully characterized in the solid state at high temperature was finally presented (≥300 °C)., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement HYBRIDplus (101084182). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. “This work was partially funded by the Ministerio de Ciencia e Innovaci´ on - Agencia Estatal de Investigaci´ on (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE)”. This paper is part of the RYC2023- 044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is part of the PID2024-156068OB-C21 and PID2024- 156068OB-C22, funded by Ministerio de Ciencia e Innovaci´ on y Universidades - Agencia Estatal de Investigaci´ on MICIU/AEI/10.13039/ 501100011033 and FSE+. Funded by Ministerio de Ciencia e Innovaci´ on y Universidades - Agencia Estatal de Investigaci´ on (MICIU/ AEI/10.13039/501100011033) (RED2024-153629-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Synthesis and characterization of bio-based ionic liquids to be used as phase change materials

  • Nahad, Mahya Nikoo
  • Font-Prieur, Daylen Y.
  • Escribà i Gelonch, Marc
  • Cabeza, Luisa F.
This study investigates the synthesis of a bio-based ionic liquids (ILs) from waste biomass, as potential phase change materials to be used for thermal energy storage. The reaction path includes two-stage scalable synthetic pathway, achieving 96% yield in the first and an overall yield of 80% on the second stage. The methodology was statistically validated, achieving an average intermediate conversion of 96% with high repeatability. Rection pathways and kinetics were monitored using 1H-NMR spectroscopy. The bio-based ionic liquids developed in this study represent promising candidates for thermal energy storage applications, offering the dual advantages of inherent sustainability and a molecular design, optimized for high latent heat capacity and cost-effective production., This work has received funding from the Ministerio de Ciencia, Innovación y Universidades and the Agencia Estatal de Investigación (Action CNS2024-154421 funded by MICIU/AEI/10.13039/501100011033). This work is partially supported by ICREA under the ICREA Academia programme. This work was also partially funded by the Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Thermo-mechanical behaviour of steel , fibres reinforced refractory concrete for thermal energy storage applications

  • Alshouha, Abdelrahman
  • Castro Chicot, José Ramón
  • Zsembinszki, Gabriel
  • Mani Kala, Saranprabhu
  • Cabeza, Luisa F.
Based on a review and analysis of recent experimental studies on high-temperature concrete, this study investigates the performance of calcium aluminate concrete developed for sensible thermal energy storage applications. The primary aim of this research is to evaluate the effect of steel fibres on thermo-mechanical behaviour of both non-thermally treated and thermally treated calcium aluminate concrete. Two types of steel fibres were incorporated into the concrete mixtures, that is wavy low carbon steel fibres and wool stainless-steel fibres at varying dosages (0, 30, 50, and 75 kg/m³), to investigate their effect on physical, mechanical, and thermal performance of calcium aluminate concrete at high temperatures up to 700 °C. The results showed that both thermally treated and non-thermally treated concrete reinforced with wavy low carbon steel fibres experienced crack formation and subsequent degradation after 25 thermal cycles, leading to loss of compressive strength and matrix-fibres separation. In contrast, thermally treated concrete reinforced with wool stainless-steel fibres showed stability in retention of compressive strength after 25 thermal cycles. The influence of the steel fibres on the thermo-mechanical behaviour of refractory concrete allows the prediction of the failure mechanism of the composites., This project is part of the PID2024-156068OB-C21, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+, and Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). This project was partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Thermal performance characterisation of a bulk PCM tank for cold thermal energy storage

  • Alfaro-López, Miguel Á.
  • Belmonte, Juan F.
  • Almendros-Ibáñez, José A.
The projected growth in building cooling demand and its impact on peak electricity demand has highlighted the need for advanced energy management strategies. Thermal energy storage offers a promising approach through load shifting, while Phase Change Materials (PCM) are attractive due to their high energy density. This study presents preliminary experimental results on the characterisation of a bulk PCM tank for cold storage containing 322 kg of the commercial inorganic PCM SP12SK. Tank performance was evaluated in terms of temperature distribution and stored energy capacity through solidification and melting tests at three inlet temperature differences respect melting point (T = 4, 6 and 8ºC). The results show that nearly 90% of the theoretical storage capacity is reached, with stored and released energies between 9.3 and 14.4 kWh, confirming the strong potential of bulk inorganic PCM systems for cold storage., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain. This work has been carried out as part of the predoctoral contract 2024-UNIVERS-12844 at the University of Castilla-La Mancha (UCLM), funded by the European Union through the European Social Fund Plus (FSE+).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of cascade finned shell and tube TES tanks with organic phase change materials

  • Megra, Kassahun Tadesse
  • Mani Kala, Saranprabhu
  • Peccolo, Simone
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
Latent heat thermal energy storage (TES) systems using phase change materials (PCMs) are promising for mitigating renewable energy intermittency and improving waste heat recovery, due to their high energy density and near-constant operating temperature. To increase energy storage capacity, PCMs can operate beyond their melting point, but this induces thermal stress. Cascade TES systems overcome these issues by using multiple PCMs with different melting points and enable multilevel energy utilisation. A custom-built experimental setup is used to investigate the charging and discharging characteristics of a three-stage cascade TES system using organic PCMs in finned shell and tube TES tanks. The results show that cascade systems can be effectively integrated over a wide temperature range, storing a higher energy than single stage systems., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+. This work is also Funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Scale-up of Nanoencapsulated Phase Change Material Slurry

  • López-Pedrajas, Daniel
  • Rodríguez, Juan F.
  • Carmona, M.
  • Borreguero, Ana M.
The scale-up of the nanoencapsulated phase change material slurry (NPCS) production from lab scale (0.25 L reactor) to pilot plant scale (100 L reactor) has been carried out. The properties of the products obtained on these two scales remained almost unchanged. The long-term stability of the NPCS (pilot plant scale) was analyses by comparing the main properties after twenty months of storage time. The capsules maintained the nanometric size with a slight increase due to coalescence of them (dn0.5 = 75.0 nm just after preparation; dn0.5 = 87.3 nm at 20 months). The thermal storage capacity was also practically the same (𝛥𝐻𝐿= 46.1 J g-1 at the beginning; 𝛥𝐻𝐿=46.7 J g-1 at 20 months), as well as the colloidal stability (|ζ| changed from 54.2 to 47.9 mV after 20 months). Therefore, the scalability of the production process and the long-term stability of the NPCS is demonstrated, what is essential for being considered as an interesting solution to reduce fossil fuel dependence in the building sector., This work was supported by MCIU/AEI/10.13039/501100011033 due to the projects with references PID2021-123625OB-100 and RED2024-153629-T, the financial support from the European Regional Development Fund and the Regional Government of Castilla-La Mancha, project with reference SBPLY/21/180225/000082, and the fellowship for PhD studies (FPU16/02345) of Daniel Lopez-Pedrajas. Daniel Lopez-Pedrajas also must thanks to the European Union’s Next Generation funds, coordinated at the Spanish level by the Recovery, Transformation and Resilience Plan.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Proyecto fin de carrera (BachelorThesis)

Disseny termo-mecànic d’un tanc d’emmagatzematge d’energia térmica amb criteris biomimètics

  • Risco Amigó, Sara
L’ús dels materials de canvi de fase (PCM) com medi per l’emmagatzematge d’energia tèrmica (TES) consagren aquesta tecnologia com una solució eficient i fiable per la gestió de l’energia tèrmica. Aquest requisit és molt important en moltes aplicacions on la demanda energètica i el consum energètic no coincideixen en el temps. Però, molts PCM presenten una baixa conductivitat tèrmica, fet que dificulta la propagació de la calor cap a les zones més llunyades del seu volum. Per tal de millorar la transferència de calor entre el fluid caloportador (HTF), en aquest cas aigua, i el PCM, aquest Treball de Final de Grau proposa una idea de concepte de disseny d’un dipòsit TES de calor latent inspirat en la natura (BioTES) que, una vegada materialitzat amb fabricació additiva, es valida mitjançant l’avaluació experimental en un banc d’assaig personalitzat. Una vegada detectades les limitacions en la distribució del flux en el primer concepte de dipòsit amb orientació vertical, es planteja la redistribució de la geometria interna, a més d’un canvi d’orientació i l’augment de l’àrea efectiva de la superfície d’intercanvi d’energia tèrmica. A més, els resultats de simulacions de dinàmica de fluids (CFD) realitzades per l’empresa externa ANALISIS-DSC, soci del projecte SUSHEAT, mostren que aquest redisseny afavoreix una distribució mñes homogènia del HTF respecte la configuració vertical (ANALISIS-DSC, n.d.). Els resultats experimentals realitzats amb PCM inorgànic han permès comparar el rendiment energètic entre les configuracions dissenyades i un dipòsit TES de carcassa i tubs. Per una banda, el BioTES horitzontal, completa els processos de càrrega i descàrrega aproximadament en 0,30 h i 1,45 h, respectivament. Aquests valors representen una reducció del temps fins a un 41% en la càrrega i un 40% en la descàrrega respecte als sistemes TES de calor latent analitzats. A més, presenta una millor relació entre l’energia útil emmagatzemada o alliberada i la velocitat a la qual es produeix aquest procés. En conjunt, l’evolució des de l’estructura ramificada, jeràrquica i recursiva del BioTES vertical fins a una geometria tridimensional més distribuïda en el BioTES horitzontal, dona com a resultat l’optimització de l’estructura de la xarxa de distribució assolint una millor homogeneïtzació del fluid caloportador. Així, s’estableix una base per al desenvolupament de futures configuracions bioinspirades més eficients., The use of phase change materials (PCMs) as a medium for thermal energy storage (TES) establishes this technology as an efficient and reliable solution for thermal energy management. This requirement is particularly important in applications where energy demand and energy consumption do not coincide in time. However, many PCMs exhibit low thermal conductivity, which hinders heat propagation to regions farther from the heat-transfer surface. Therefore, to improve heat transfer between the heat transfer fluid (HTF)—in this study, water—and the PCM, this Bachelor's Final Project proposes a design concept for a nature-inspired latent heat storage TES tank. Once manufactured using additive manufacturing, the proposed concept is validated through experimental evaluation on a custom-built test bench. After identifying limitations in flow distribution in the first vertically oriented tank concept, the internal geometry was redistributed, the System orientation was modified, and the effective heat-transfer surface area was increased. In addition, computational fluid Dynamics (CFD) simulation results obtained by ANALISIS-DSC, a partner of SUSHEAT projetc, show that this redesign promotes a more homogeneous Distribution of the HTF compared with the vertical configuration (ANALISIS-DSC, n.d.). The experimental results obtained with inorganic PCM enabled the energy performance of the designed configurations to be compared with that of a shelland-tube TES tank. On the one hand, the horizontal BioTES completes the charging and discharging processes in approximately 0,30 h and 1,45 h, respectively. These values represent reductions of up to 41% in charging time and 40% in discharging time compared with the latent heat TES systems analyzed. Moreover, it offers a better ratio of useful energy stored or released to the rate at which this process occurs. Overall, the transition from the branched, hierarchical, and recursive structure of the vertical BioTES to a more distributed, three-dimensional geometry in the horizontal BioTES results in an optimized distribution network, achieving a more homogeneous distribution of the heat-transfer fluid. Thus, this work establishes a basis for the development of more efficient future bio-inspired configurations., This study has received funding from the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No.101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. 2 Aquest treball ha estat finançat pel Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021 – 123511OB-C31 – MCIN/AEI/ 10.13039/501100011033/FEDER, UE). Aquest treball ha estat finançat pel Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). Finalment, agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2021 SGR 01615) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estimation of solar absorptivity through color quantification for CSP solid particles

  • Cerutti-Cristaldo, Leonel Mario
  • Flores-Ríos, Paula María
  • Díaz-Heras, Minerva
  • Hernández-López, Leonor
  • Almendros-Ibáñez, José Antonio
This study evaluates cost-effective colorimetric alternatives to broad-spectrum spectrophotometry for characterizing CSP solar absorptivity. Using a visible-range spectrometer, three indicators were tested: the visible solar absorptivity (𝛼𝑉𝐼𝑆), lightness (L), and distance to the ideal black point (Δ𝐶). Results for various achromatic materials showed high reliability, with 𝛼𝑉𝐼𝑆 yielding 𝑅2=0.985. Colorimetric parameters performed similar, with a 𝑅2=0.981. While specular materials like SiC introduce geometric measurement errors, the findings confirm that CIELab quantification is a highly accurate, high-throughput screening tool for neutral-colored CSP materials., This work was partially funded by the project PID2024-159711OB-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain, grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain and CIPROM/ 2023/44 funded by Generalitat Valenciana.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance benchmark of thermal energy storage concepts in concentrating solar power

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
Thermal energy storage (TES) plays a critical role in enhancing the efficiency and dispatchability of concentrating solar power (CSP) plants by mitigating solar energy intermittency. Although molten salts remain the dominant TES solution, alternative systems such as solid-state and latent heat storage offer promising advantages. This study analyses the performance impact of different TES technologies—two-tank molten salt, concrete-based storage, and phase change materials (PCMs)—when integrated into CSP systems. By comparing key performance indicators under identical operating conditions, this study provides insights into the suitability of each TES technology for CSP plant operations. The results highlight the trade-offs between energy yield, efficiency, and footprint. All three concepts demonstrated comparable performance at both the system and TES levels, with disparities of less than 3 %. The advantage of PCM lies in its substantial volume reduction of approximately 27 % compared to molten salt, whereas concrete TES achieves similar outcomes with a slight increase in volume relative to molten salt TES volume., This project was funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033 and FSE+) (PID2024-156068OB-C21). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.