Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Synthesizing new materials for thermal energy storage

  • Nahad, Mahya Nikoo
Why do we need to store thermal energy? Storing thermal energy is essential because it helps mitigate climate change, reduce energy costs, and preserve resources for future generations. What is the objective of developing new materials for thermal energy storage? The goal is to create efficient and sustainable materials that can store and release heat effectively. Phase Change Materials (PCMs) are an example of such materials, as they store heat when they melt and release it when they solidify., This study has received funding from the European Union’s Horizon Europe research and innovation programme under Grant Agreement No. 101084182 (HYBRIDplus). The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or AINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, EU). It was also funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, EU) and by the Ministerio de Ciencia e Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2024-153629-T). In addition, this work was partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Government of Catalonia for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified TECNIO agent in the category of technology developers by the Government of Catalonia. This project is also co-funded by the European Union’s Horizon Europe research and innovation programme under the project NitRecercat2425 (101162003).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Evaluación comparativa de las tecnologías de almacenamiento de energía térmica (TES) integradas a sistemas de generación termosolar (CSP)

  • Tagle-Salazar, Pablo D.
El almacenamiento de energía térmica (TES) capta el calor extra de los periodos soleados y lo libera cuando el recurso solar es insuficiente para generar electricidad. Así, se garantiza un suministro de energía constante y fiable. En las centrales termosolares (CSP), el TES mantiene la producción de electricidad, incluso después del ocaso. Objetivos: 1. Comparar sistemas de almacenamiento usando sales fundidas, hormigón y materiales de cambio de fase (PCM) como medios de almacenamiento integrados a centrales CSP en las mismas condiciones para descubrir sus puntos fuertes y sus limitaciones. 2. Desarrollar una herramienta hecha a medida que modele cómo se comporta cada sistema de almacenamiento a lo largo del tiempo e interactúa con otras partes de la planta, lo que permite un análisis realista del rendimiento., Este proyecto ha sido financiado por el programa de investigación e innovación Horizonte Europa de la Unión Europea mediante el acuerdo de subvención 101084182 (HYBRJ Plus). No obstante, las opiniones y puntos de vista expresados son exclusivamente los de los autores y no reflejan necesariamente los de la Unión Europea ni los de CINEA. Ni la Unión Europea ni la autoridad que concede la subvención pueden ser consideradas responsables de los mismos. Este trabajo está parcialmente financiado por el Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (AEI) (REF: 2024-153629-I) y por el Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-I00 – MCIN/AEI/10.13039/501100011033/FEDER, UE). Asimismo, ha sido financiado por el Ministerio de Ciencia e Innovación de España (MCIN/AEI/10.13039/501100011033) y por la Unión Europea a través de NextGenerationEU/PRTR (Grant Agreement TED2021-132216A-I00). Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. Los autores agradecen al Departament de Recerca i Universitats de la Generalitat de Catalunya la acreditación de calidad concedida a su grupo de investigación (2021 SGR 01615). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos de la Generalitat de Catalunya. Este proyecto está cofinanciado por el programa de investigación e innovación de la Unión Europea Horizonte Europa, dentro del proyecto NitRecercat2425 (GA 101162003).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Dynamic heat transfer model for thermal energy storage using metal wool–phase change material composites

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • López-Román, Antón
  • Prieto, Cristina
Decarbonisation of the energy sector is critical for climate change mitigation, with the power sector remaining a major contributor to global emissions. Concentrating solar power (CSP) technology combined with thermal energy storage (TES) presents a promising solution to overcome this challenge. TES systems, particularly those utilising phase change materials (PCMs), offer efficient energy storage by harnessing latent heat, enabling reliable power generation, and providing high-temperature heat for industrial processes. This research introduces a heat transfer model designed to simulate the thermal behaviour of TES systems utilising wool–PCM composites as storage medium. The mathematical model was implemented on the OpenModelica platform and it is intended to be incorporated into a simulation tool currently being developed by the authors to assess the performance of CSP plants under dynamic conditions. The model was validated by comparing the simulation results with the experimental measurements of the temperature within the composite domain during both the charging and discharging cycles. The simulations replicated key experimental parameters, including geometry, material properties, and boundary conditions, and evaluated two configurations with coarse and fine wool fibres. The results demonstrated good agreement with the experimental data for coarse wool, with a root mean square error (RMSE) of up to 2.29 K. For fine fibres, the RMSE increased to 5.31 K, indicating a larger deviation. Despite these challenges, the model successfully captured the overall thermal response trend and phase transition behaviour observed experimentally. The findings highlight the efficacy and limitations of the proposed thermal model and emphasise the necessity for advanced macroscopic-scale effective thermal conductivity modelling approaches for such composites that integrate the influence of pore-scale characteristics (i.e., volume change). This research will advance the current state-of-the-art in this field and will mitigate the discrepancies identified in this study when these models are applied in practice. This integration is crucial for enhancing the accuracy and improving the time simulation of large-scale TES systems in CSP applications., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE). Funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/ AEI /10.13039/501100011033) (RED2024-153629-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Phase change material cascade storage for CSP: A performance evaluation

  • Prieto, Cristina
  • López-Román, Antón
  • Tagle-Salazar, Pablo D.
  • de Giorgi, Paolo
  • Cabeza, Luisa F.
The integration of supercritical CO2 (sCO2) Brayton cycles in Concentrating Solar Power (CSP) plants offers a pathway to higher thermal efficiencies compared to conventional Rankine cycles. However, achieving high operational temperatures demands advanced Thermal Energy Storage (TES) solutions beyond the limits of traditional molten salt systems. This study evaluates a novel cascade phase change material (PCM) TES system, comparing it to a single PCM storage configuration under identical operating conditions to assess its feasibility for large-scale CSP applications. The results demonstrate that the cascade PCM TES system achieves an 282 % increase in energy storage capacity and enables more stable thermal management. A new two-dimensional model is developed to simulate the thermal behavior of PCM–metal wool composites in both single and cascade configurations under CSP operating conditions. The findings underscore the advantages of cascade PCM TES systems, particularly in maintaining solar salt as a viable heat transfer fluid while supporting next-generation sCO2 power cycles. Additionally, the hybridization potential of this system allows direct integration with surplus renewable electricity, increasing dispatchability and grid flexibility. These advancements position cascade PCM storage as a promising solution for cost-effective, high-efficiency CSP deployment., This project was funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). This work was partially funded by the Ministerio de Ciencia e Innovación de España (MICIU/AEI/10.13039/501100011033) and the European Union by NextGenerationEU/PRTR (Grant Agreement TED2021-132216A-I00). This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE). Funded by Agencia Estatal de Investigación (MICIU/AEI/10.13039/501100011033) (RED2024-153629-T). The authors from University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Development of copper metal wool incorporated in a latent thermal energy storage tank for improved charging and discharging

  • Mani Kala, Saranprabhu
  • Ribezzo, Alessandro
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
The thermal energy storage tank is an essential component of a conventional thermal energy storage system. Nevertheless, low charging and discharging rates is one of the different problems associated with them. Many research studies were conducted to improve the charging and discharging characteristics of thermal energy storage tanks. Those include the addition of nanoparticles, heat pipes, metal foams, and encapsulation of the phase change material. Even though those approaches improved the thermal performance of the storage tank, they also promoted some problems, like nanoparticle deposition, suppression of natural convection, and reduced energy density. This study, used a different approach to improve the thermal performance, integrating copper metal wool of two discrete thicknesses perpendicular to the heat transfer fluid carrying tubes. Accordingly, with two different packaging factor four different configurations of metal wool-packed tanks were developed and compared against the reference, i.e., a conventional shell and tube tank. The thermal performance of the developed cases was tested using a custom-built test rig. The integration of copper metal wool reduced the charging and discharging time significantly. However, the fully stacked fine fibre wool packed tank showed a remarkable 85% reduction in solidification time and a 37.4% reduction in melting time compared to the conventional shell and tube tank. Moreover, it showed a higher mean power than all the developed cases, with 414% enhancement during the discharging cycle and 42% during the charging cycle. Thus, the incorporation of metal wool into a tank is an effective way to enhance its thermal performance., This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement N. 101036910 (StoRIES). This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Performance enhancement of a PCM-based cascaded thermal energy storage system through integration of an electrically charged stage

  • López-Román, Antón
  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
This research offers an in-depth benchmark analysis that evaluates two cascaded thermal energy storage (TES) systems utilising phase change materials (PCMs) as the storage medium. A conventional four-stage thermal-only cascaded system was assessed against an alternative configuration that incorporated an electrically-charged (EC) and thermally-discharged high-temperature stage. The findings demonstrate that the incorporation of an EC stage substantially increased the total energy discharged, nearly doubling it, and accounting for a 64.83% increase in the discharging process duration, with a volume increase of 20.14%. Furthermore, the discharge of the thermal stages was improved by up to 56.66% compared to its non-electrified counterpart. These findings offer valuable insights into the design and implementation of advanced high-temperature TES systems for future low-carbon energy systems., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Compatibility of carbonate mixtures to be used as molten salts with different metal alloys to be used as container materials

  • Cabeza, Luisa F.
  • Martínez, Franklin R.
  • Borri, Emiliano
The energy transition can only be achieved if the global energy sector is transformed from a fossil-based system to a zero-carbon-based source system. To achieve this aim, two technologies have shown promising advances in high-temperature application. Concentrating solar power (CSP) plants are seen as a key technology to achieve the needed energy transition, and carbon dioxide (CO2) capture and storage (CCS) is a promising technology for decarbonizing the industrial sector. To implement both technologies, molten carbonate salts are considered promising material. However, their corrosive behavior needs to be evaluated, especially at high temperatures, where corrosion is more aggressive in metal structures. This paper presents an experimental evaluation of the static corrosion of two molten carbonate salts, a Li2CO3-Na2CO3-K2CO3-LiOH·H2O (56.65-12.19-26.66-4.51wt.%) mixture and a Li2CO3 salt, under an air atmosphere with five corrosion-resistant metal alloys, including Alloy 600, Alloy 601, Alloy 625, Alloy 214, and Alloy X1. In this study, the corrosion rate and mass losses were quantified. In addition, in all the cases, the results of the experimental evaluation showed corrosion rate values between 0.0009 mg/cm2·yr and 0.0089 mg/cm2·yr., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/FEDER, UE), and Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (RED2022-134219-T). TED2021-132216A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union by NextGenerationEU/PRTR. Franklin R. Martinez Alcocer thanks the National Doctorate Scholarship for foreign students ANID 2021 Folio 21211932 for the financial support in the research. S. Ushak acknowledges to ANID/PUENTE N° 1522A0006 and ANID/FONDECYT REGULAR N° 1231721 projects. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the company STAX for their contribution to the study.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Enhancement of heat transfer through the incorporation of copper metal wool in latent heat thermal energy storage systems

  • Ribezzo, Alessandro
  • Morciano, Matteo
  • Zsembinszki, Gabriel
  • Risco Amigó, Santiago
  • Mani Kala, Saranprabhu
  • Borri, Emiliano
  • Bergamasco, Luca
  • Fasano, Matteo
  • Chiavazzo, Eliodoro
  • Prieto, Cristina
  • Cabeza, Luisa F.
The design of thermal energy storage (TES) tank is the key part that can limit charging and discharging process. Most research findings highlight that the use of fins augments the heat transfer rate. This work experimentally investigates the use of aligned copper wools as fillers to enhance the thermal performance of a lab-scale shelland- tube TES tank filled with phase change material (PCM). Two copper wools with different fibre thicknesses were chosen and discretely laid around the TES tank tubes in two design patterns. Accordingly, five shell-andtube TES tank configurations were obtained, including the reference, for performance evaluation. The TES tank was loaded with n-octadecane as PCM for all the cases studied. The results showed up to a 16 % reduction in melting time with the inclusion of copper wool. The TES tank significantly increased the mean power during charging (53 %) and discharging (205 %). The addition of metal wool into the TES tank enables the PCM to release the heat at a constant temperature during the entire phase transition process. And the overall efficiency of the TES tank was found to get improved. Therefore, a copper wool integrated TES tank would be a beneficial addition to thermal energy storage systems., This project was funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Department de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of cascade finned shell and tube TES tanks with organic phase change materials

  • Megra, Kassahun Tadesse
  • Mani Kala, Saranprabhu
  • Peccolo, Simone
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
Latent heat thermal energy storage (TES) systems using phase change materials (PCMs) are promising for mitigating renewable energy intermittency and improving waste heat recovery, due to their high energy density and near-constant operating temperature. To increase energy storage capacity, PCMs can operate beyond their melting point, but this induces thermal stress. Cascade TES systems overcome these issues by using multiple PCMs with different melting points and enable multilevel energy utilisation. A custom-built experimental setup is used to investigate the charging and discharging characteristics of a three-stage cascade TES system using organic PCMs in finned shell and tube TES tanks. The results show that cascade systems can be effectively integrated over a wide temperature range, storing a higher energy than single stage systems., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+. This work is also Funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Performance benchmark of thermal energy storage concepts in concentrating solar power

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
Thermal energy storage (TES) plays a critical role in enhancing the efficiency and dispatchability of concentrating solar power (CSP) plants by mitigating solar energy intermittency. Although molten salts remain the dominant TES solution, alternative systems such as solid-state and latent heat storage offer promising advantages. This study analyses the performance impact of different TES technologies—two-tank molten salt, concrete-based storage, and phase change materials (PCMs)—when integrated into CSP systems. By comparing key performance indicators under identical operating conditions, this study provides insights into the suitability of each TES technology for CSP plant operations. The results highlight the trade-offs between energy yield, efficiency, and footprint. All three concepts demonstrated comparable performance at both the system and TES levels, with disparities of less than 3 %. The advantage of PCM lies in its substantial volume reduction of approximately 27 % compared to molten salt, whereas concrete TES achieves similar outcomes with a slight increase in volume relative to molten salt TES volume., This project was funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033 and FSE+) (PID2024-156068OB-C21). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Effective thermal conductivity measurement of anisotropic metal wool-loaded PCM matrix

  • López-Román, Antón
  • Mani Kala, Saranprabhu
  • Ribezzo, Alessandro
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Megra, Kassahun Tadesse
  • Prieto, Cristina
  • Cabeza, Luisa F.
Metal wool is an emerging heat-transfer enhancer to improve the power density of thermal energy storage (TES) systems using phase change materials (PCMs). Previous experimental studies showed that metal wools can be placed in different ways and positions into TES tanks. Therefore, measuring the effective thermal conductivity of a metal wool-loaded PCM matrix is essential for determining the direction of maximum thermal-conductivity enhancement, given the anisotropic nature of metal wools. Most existing studies report the effective thermal conductivity of such matrices through steady-state measurements in TES tanks. This study uniquely assesses the effective thermal conductivity of a metal wool-loaded PCM matrix in all three axial directions of the samples. Copper and stainless-steel 434 are the metal wools, while n-octadecane and sodium nitrate are the PCMs examined in this study. Various metal wool-loaded PCM matrix samples were developed by varying the metal wool weight fraction in the PCM. Incorporating 20 wt% stainless-steel metal wool into the PCM enhances the effective thermal conductivity by 55% to 90% along all three axial directions compared to the bulk PCM. A maximum enhancement of 649% was observed for the copper metal wool-loaded n-octadecane matrix samples, along the direction aligned with the metal wool fibres. Results demonstrate that the anisotropic characteristics of metal wool become relevant when assessing the effective thermal conductivity of a metal wool-loaded PCM matrix, especially for PCM loaded with high thermal conductivity metal wool. Conclusions from this study also support the numerical simulation of TES systems, enabling more precise modelling for real-world applications., This project was funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, PID2024-156068OB-C21, PID2024-156068OBC22funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work was partially funded by the Ministerio de Ciencia e Innovacion ´ – Agencia Estatal de Investigacion ´ (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE). This work was partially funded by Ministerio de Ciencia e Innovacion ´ - Agencia Estatal de Investigacion ´ (AEI) (RED2024-153629-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Thermal Energy Storage Using Phase Change Materials in High-Temperature Industrial Applications: Multi-Criteria Selection of the Adequate Material

  • Cabeza, Luisa F.
  • Martínez, Franklin R.
  • Borri, Emiliano
  • Ushak, Svetlana
  • Prieto, Cristina
Thermal energy storage (TES) plays an important role in industrial applications with intermittent generation of thermal energy. In particular, the implementation of latent heat thermal energy storage (LHTES) technology in industrial thermal processes has shown promising results, significantly reducing sensible heat losses. However, in order to implement this technology, a proper selection of materials is important. In this study, a new multi-criteria phase change material (PCM) selection methodology is presented, which considers relevant factors from an application and material handling point of view, such as hygroscopicity, metal compatibility (corrosion), level hazard, cost, and thermal and atmospheric stability. The methodology starts after setting up the system requirements where the PCM will be used, then a material screening is able to find all possible candidates that are listed with all available properties as listed before. Then, a color map is produced, with a qualitative assessment of material properties drawbacks, hazard level, melting enthalpy, and price. The experimentation starts with a preliminary set of tests on hygroscopicity and one-week corrosion test, which allows disregarding PCMs and selecting a short list of potential PCMs that would need further characterization before the final selection., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/FEDER, UE), and Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (RED2022-134219-T). TED2021-132216A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union by NextGenerationEU/PRTR. Franklin R. Martinez Alcocer thanks the National Doctorate Scholarship for foreign students ANID 2021 Folio 21211932 for the financial support in the research. S. Ushak acknowledges to ANID/PUENTE N◦ 1522A0006 and ANID/FONDECYT REGULAR N◦ 1231721 projects.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Innovation trends on high-temperature thermal energy storage to defossilize energy systems

  • Pantaleo, Antonio
  • Trevisan, Silvia
  • Matteucci, Francesco
  • Cabeza, Luisa F.
The EU climate neutrality ambitious goals require breakthrough solutions and innovative products in many technological areas. The need of a transition to a more affordable energy system highlights the importance of new cost-competitive energy storage systems, including thermal energy storage (TES) for waste heat recovery, heating and cooling supply or for the increased flexibility of power systems via power to heat to power. This work focusses on technologically mature or close to market TES solutions, overviewing some of the most promising start-ups active in the sector of mid to high temperature TES for industrial heat applications or power to heat to power. It also discusses key elements to transfer these technologies to products available for market uptake. These key challenges include technical issues, such as control mechanisms, increased durability and stability of the employed materials, devices' reliability and fast dynamic performances to provide grid services or enable demand response; but also the development of new business models and novel approaches to produce revenues. Moreover, the review identifies as a key ingredient for the success in scaling up new TES products and manufacturing lines the capability to fast develop demonstration and first of a kind plants that can increase investors' trust., This project was partially funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreements 101083899 (SHARP-sCO2), 101136000 (SCO2OP-TES), 101084182 (HYBRIDplus), and 101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the EISMEA or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Evaluation of the corrosion of metal-based containers in contact with molten salts at high temperature under inert atmosphere

  • Cabeza, Luisa F.
  • Martínez Alcocer, F. Rodrigo
  • Borri, Emiliano
  • Mani Kala, Saranprabhu
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
The reliable deployment of high-temperature thermal energy storage (TES) systems in concentrated solar power (CSP) plants requires an accurate assessment of material compatibility under realistic operating conditions. However, conventional corrosion testing in air atmosphere does not adequately represent the inert environments typically used in TES tanks, potentially leading to overly conservative material selection. This study experimentally evaluates the corrosion behaviour of PCM–metal wool composite materials under inert atmosphere conditions representative of CSP operation. Sixteen molten salt formulations, including nitrate-, carbonate-, chloride-, and sulphate-based systems, were tested in contact with metallic fibres and structural alloys (SS 314, SS 434, and Alloy 20) over a wide temperature range. The results demonstrate that inert atmosphere significantly alters material compatibility. Several PCM formulations that previously failed under air conditions exhibit acceptable behaviour under inert atmosphere, highlighting the limitations of conventional testing approaches. Nitrate- and carbonate-based systems operating between 300 and 500 °C show good compatibility with conventional alloys, whereas chloride-rich systems above 500 °C remain highly corrosive regardless of the atmosphere. These findings define a clear operational window for safe material selection. Importantly, the incorporation of metallic wool as a conductive matrix does not introduce additional corrosion penalties within this window, supporting the feasibility of PCM–metal wool composites for enhanced TES performance. This work provides experimental validation of TES materials under representative conditions and demonstrates that inert atmosphere is a critical factor for realistic material qualification in CSP applications., This study was partially funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovacion ´ - Agencia Estatal de Investigacion ´ (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/ 501100011033/FEDER, UE). Funded by Ministerio de Ciencia e Innovacion ´ y Universidades - Agencia Estatal de Investigacion ´ (MICIU/ AEI /10.13039/501100011033) (RED2024-153629-T, PID2024- 156068OB-C21, PID2024-156068OB-C22). This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE + . This work is partially supported by ICREA under the ICREA Academia and Serra Hunter programmes. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Heat transfer enhancement of thermal energy storage systems using phase change materials: experimental work

  • Megra, Kassahun Tadesse
Growing energy demand and environmental concerns are accelerating the shift to renewable sources. Solar and other renewables need efficient storage due to their intermittent nature. TES systems using phase change materials (PCMs) are promising for storing heat at constant temperatures. This research enhances TES performance by optimizing heat transfer and evaluating PCMs under real conditions. The results aim to support efficient and sustainable integration of renewable energy., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement HYBRIDplus (101084182) and SUNSHINE (101103552). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196, funded by MCIN/AEI/10.13039/501100011033 and FSE+, and Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, UE). This work is also partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is a certified TECNIO agent in the category of technology developers of the Government of Catalonia. This project is also co-funded by the European Union’s research and innovation programme Horizon Europe under the project NitRecercat2425 (GA 101162003).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Experimental characterization of phase change materials for thermal energy storage in the temperature range between 270 °C and 400 °C

  • Martínez, Franklin R.
  • Borri, Emiliano
  • Ushak, Svetlana
  • Mani Kala, Saranprabhu
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) with phase change materials (PCM) is an interesting technology to be used to improve the energy efficiency of industrial processes, contributing to their decarbonization and the integration of renewable energy sources. Even though literature lists many materials that can be used as PCM in the temperature range between 270 °C and 400 °C, most of them lack a full characterisation, jeopardising their potential implementation by practitioners and scientists. Therefore, this paper presents a complete experimental characterisation of 24 PCMs, with melting temperature, melting enthalpy, degradation temperature, and thermal conductivity in the solid state (at room temperature) determination. Moreover, corrosion tests with two different stainless-steel fibres and with Alloy 20 fibres is presented. The findings obtained in the characterization highlight the necessity of these analyses, as notable differences were observed compared to the available data, particularly in thermal stability and thermal conductivity. Moreover, the findings obtained in the compatibility test reveals that out of the 24 selected PCMs, 11 are potentially compatible with Alloy 20, and 8 with both stainless-steel fibres under environmental conditions (air atmosphere). Finally, the results presented will allow researchers and practitioners to have very detailed data on the characterisation of those PCMs., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovacion´ - Agencia Estatal de Investigacion´ (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Franklin R. Martinez Alcocer thanks the National Doctorate Scholarship for foreign students ANID 2021 Folio 21211932 for the financial support in the research. S. Ushak acknowledges to ANID/PUENTE N◦ 1523A0006 and ANID/FONDECYT REGULAR N◦ 1231721 projects
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Performance enhancement of a PCM-based cascaded thermal energy storage system through integration of an electrically charged stage

  • López-Román, Antón
  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
This research offers an in-depth benchmark analysis that evaluates two cascaded thermal energy storage (TES) systems utilising phase change materials (PCMs) as the storage medium. A conventional four-stage thermal-only cascaded system was assessed against an alternative configuration that incorporated an electrically-charged (EC) and thermally-discharged high-temperature stage. The findings demonstrate that the incorporation of an EC stage substantially increased the total energy discharged, nearly doubling it, and accounting for a 64.83% increase in the discharging process duration, with a volume increase of 20.14%. Furthermore, the discharge of the thermal stages was improved by up to 56.66% compared to its non-electrified counterpart. These findings offer valuable insights into the design and implementation of advanced high-temperature TES systems for future low-carbon energy systems., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental characterization of phase change materials for thermal energy storage in the temperature range between 270 °C and 400 °C

  • Martínez, Franklin R.
  • Borri, Emiliano
  • Ushak, Svetlana
  • Mani Kala, Saranprabhu
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) with phase change materials (PCM) is an interesting technology to be used to improve the energy efficiency of industrial processes, contributing to their decarbonization and the integration of renewable energy sources. Even though literature lists many materials that can be used as PCM in the temperature range between 270 °C and 400 °C, most of them lack a full characterisation, jeopardising their potential implementation by practitioners and scientists. Therefore, this paper presents a complete experimental characterisation of 24 PCMs, with melting temperature, melting enthalpy, degradation temperature, and thermal conductivity in the solid state (at room temperature) determination. Moreover, corrosion tests with two different stainless-steel fibres and with Alloy 20 fibres is presented. The findings obtained in the characterization highlight the necessity of these analyses, as notable differences were observed compared to the available data, particularly in thermal stability and thermal conductivity. Moreover, the findings obtained in the compatibility test reveals that out of the 24 selected PCMs, 11 are potentially compatible with Alloy 20, and 8 with both stainless-steel fibres under environmental conditions (air atmosphere). Finally, the results presented will allow researchers and practitioners to have very detailed data on the characterisation of those PCMs., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovacion´ - Agencia Estatal de Investigacion´ (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Franklin R. Martinez Alcocer thanks the National Doctorate Scholarship for foreign students ANID 2021 Folio 21211932 for the financial support in the research. S. Ushak acknowledges to ANID/PUENTE N◦ 1523A0006 and ANID/FONDECYT REGULAR N◦ 1231721 projects
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of the corrosion of metal-based containers in contact with molten salts at high temperature under inert atmosphere

  • Cabeza, Luisa F.
  • Martínez Alcocer, F. Rodrigo
  • Borri, Emiliano
  • Mani Kala, Saranprabhu
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
The reliable deployment of high-temperature thermal energy storage (TES) systems in concentrated solar power (CSP) plants requires an accurate assessment of material compatibility under realistic operating conditions. However, conventional corrosion testing in air atmosphere does not adequately represent the inert environments typically used in TES tanks, potentially leading to overly conservative material selection. This study experimentally evaluates the corrosion behaviour of PCM–metal wool composite materials under inert atmosphere conditions representative of CSP operation. Sixteen molten salt formulations, including nitrate-, carbonate-, chloride-, and sulphate-based systems, were tested in contact with metallic fibres and structural alloys (SS 314, SS 434, and Alloy 20) over a wide temperature range. The results demonstrate that inert atmosphere significantly alters material compatibility. Several PCM formulations that previously failed under air conditions exhibit acceptable behaviour under inert atmosphere, highlighting the limitations of conventional testing approaches. Nitrate- and carbonate-based systems operating between 300 and 500 °C show good compatibility with conventional alloys, whereas chloride-rich systems above 500 °C remain highly corrosive regardless of the atmosphere. These findings define a clear operational window for safe material selection. Importantly, the incorporation of metallic wool as a conductive matrix does not introduce additional corrosion penalties within this window, supporting the feasibility of PCM–metal wool composites for enhanced TES performance. This work provides experimental validation of TES materials under representative conditions and demonstrates that inert atmosphere is a critical factor for realistic material qualification in CSP applications., This study was partially funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovacion ´ - Agencia Estatal de Investigacion ´ (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/ 501100011033/FEDER, UE). Funded by Ministerio de Ciencia e Innovacion ´ y Universidades - Agencia Estatal de Investigacion ´ (MICIU/ AEI /10.13039/501100011033) (RED2024-153629-T, PID2024- 156068OB-C21, PID2024-156068OB-C22). This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE + . This work is partially supported by ICREA under the ICREA Academia and Serra Hunter programmes. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Phase change material cascade storage for CSP: A performance evaluation

  • Prieto, Cristina
  • López-Román, Antón
  • Tagle-Salazar, Pablo D.
  • de Giorgi, Paolo
  • Cabeza, Luisa F.
The integration of supercritical CO2 (sCO2) Brayton cycles in Concentrating Solar Power (CSP) plants offers a pathway to higher thermal efficiencies compared to conventional Rankine cycles. However, achieving high operational temperatures demands advanced Thermal Energy Storage (TES) solutions beyond the limits of traditional molten salt systems. This study evaluates a novel cascade phase change material (PCM) TES system, comparing it to a single PCM storage configuration under identical operating conditions to assess its feasibility for large-scale CSP applications. The results demonstrate that the cascade PCM TES system achieves an 282 % increase in energy storage capacity and enables more stable thermal management. A new two-dimensional model is developed to simulate the thermal behavior of PCM–metal wool composites in both single and cascade configurations under CSP operating conditions. The findings underscore the advantages of cascade PCM TES systems, particularly in maintaining solar salt as a viable heat transfer fluid while supporting next-generation sCO2 power cycles. Additionally, the hybridization potential of this system allows direct integration with surplus renewable electricity, increasing dispatchability and grid flexibility. These advancements position cascade PCM storage as a promising solution for cost-effective, high-efficiency CSP deployment., This project was funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). This work was partially funded by the Ministerio de Ciencia e Innovación de España (MICIU/AEI/10.13039/501100011033) and the European Union by NextGenerationEU/PRTR (Grant Agreement TED2021-132216A-I00). This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE). Funded by Agencia Estatal de Investigación (MICIU/AEI/10.13039/501100011033) (RED2024-153629-T). The authors from University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancement of heat transfer through the incorporation of copper metal wool in latent heat thermal energy storage systems

  • Ribezzo, Alessandro
  • Morciano, Matteo
  • Zsembinszki, Gabriel
  • Risco Amigó, Santiago
  • Mani Kala, Saranprabhu
  • Borri, Emiliano
  • Bergamasco, Luca
  • Fasano, Matteo
  • Chiavazzo, Eliodoro
  • Prieto, Cristina
  • Cabeza, Luisa F.
The design of thermal energy storage (TES) tank is the key part that can limit charging and discharging process. Most research findings highlight that the use of fins augments the heat transfer rate. This work experimentally investigates the use of aligned copper wools as fillers to enhance the thermal performance of a lab-scale shelland- tube TES tank filled with phase change material (PCM). Two copper wools with different fibre thicknesses were chosen and discretely laid around the TES tank tubes in two design patterns. Accordingly, five shell-andtube TES tank configurations were obtained, including the reference, for performance evaluation. The TES tank was loaded with n-octadecane as PCM for all the cases studied. The results showed up to a 16 % reduction in melting time with the inclusion of copper wool. The TES tank significantly increased the mean power during charging (53 %) and discharging (205 %). The addition of metal wool into the TES tank enables the PCM to release the heat at a constant temperature during the entire phase transition process. And the overall efficiency of the TES tank was found to get improved. Therefore, a copper wool integrated TES tank would be a beneficial addition to thermal energy storage systems., This project was funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Department de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Innovation trends on high-temperature thermal energy storage to defossilize energy systems

  • Pantaleo, Antonio
  • Trevisan, Silvia
  • Matteucci, Francesco
  • Cabeza, Luisa F.
The EU climate neutrality ambitious goals require breakthrough solutions and innovative products in many technological areas. The need of a transition to a more affordable energy system highlights the importance of new cost-competitive energy storage systems, including thermal energy storage (TES) for waste heat recovery, heating and cooling supply or for the increased flexibility of power systems via power to heat to power. This work focusses on technologically mature or close to market TES solutions, overviewing some of the most promising start-ups active in the sector of mid to high temperature TES for industrial heat applications or power to heat to power. It also discusses key elements to transfer these technologies to products available for market uptake. These key challenges include technical issues, such as control mechanisms, increased durability and stability of the employed materials, devices' reliability and fast dynamic performances to provide grid services or enable demand response; but also the development of new business models and novel approaches to produce revenues. Moreover, the review identifies as a key ingredient for the success in scaling up new TES products and manufacturing lines the capability to fast develop demonstration and first of a kind plants that can increase investors' trust., This project was partially funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreements 101083899 (SHARP-sCO2), 101136000 (SCO2OP-TES), 101084182 (HYBRIDplus), and 101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the EISMEA or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Compatibility of carbonate mixtures to be used as molten salts with different metal alloys to be used as container materials

  • Cabeza, Luisa F.
  • Martínez, Franklin R.
  • Borri, Emiliano
The energy transition can only be achieved if the global energy sector is transformed from a fossil-based system to a zero-carbon-based source system. To achieve this aim, two technologies have shown promising advances in high-temperature application. Concentrating solar power (CSP) plants are seen as a key technology to achieve the needed energy transition, and carbon dioxide (CO2) capture and storage (CCS) is a promising technology for decarbonizing the industrial sector. To implement both technologies, molten carbonate salts are considered promising material. However, their corrosive behavior needs to be evaluated, especially at high temperatures, where corrosion is more aggressive in metal structures. This paper presents an experimental evaluation of the static corrosion of two molten carbonate salts, a Li2CO3-Na2CO3-K2CO3-LiOH·H2O (56.65-12.19-26.66-4.51wt.%) mixture and a Li2CO3 salt, under an air atmosphere with five corrosion-resistant metal alloys, including Alloy 600, Alloy 601, Alloy 625, Alloy 214, and Alloy X1. In this study, the corrosion rate and mass losses were quantified. In addition, in all the cases, the results of the experimental evaluation showed corrosion rate values between 0.0009 mg/cm2·yr and 0.0089 mg/cm2·yr., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/FEDER, UE), and Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (RED2022-134219-T). TED2021-132216A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union by NextGenerationEU/PRTR. Franklin R. Martinez Alcocer thanks the National Doctorate Scholarship for foreign students ANID 2021 Folio 21211932 for the financial support in the research. S. Ushak acknowledges to ANID/PUENTE N° 1522A0006 and ANID/FONDECYT REGULAR N° 1231721 projects. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the company STAX for their contribution to the study.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of copper metal wool incorporated in a latent thermal energy storage tank for improved charging and discharging

  • Mani Kala, Saranprabhu
  • Ribezzo, Alessandro
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
The thermal energy storage tank is an essential component of a conventional thermal energy storage system. Nevertheless, low charging and discharging rates is one of the different problems associated with them. Many research studies were conducted to improve the charging and discharging characteristics of thermal energy storage tanks. Those include the addition of nanoparticles, heat pipes, metal foams, and encapsulation of the phase change material. Even though those approaches improved the thermal performance of the storage tank, they also promoted some problems, like nanoparticle deposition, suppression of natural convection, and reduced energy density. This study, used a different approach to improve the thermal performance, integrating copper metal wool of two discrete thicknesses perpendicular to the heat transfer fluid carrying tubes. Accordingly, with two different packaging factor four different configurations of metal wool-packed tanks were developed and compared against the reference, i.e., a conventional shell and tube tank. The thermal performance of the developed cases was tested using a custom-built test rig. The integration of copper metal wool reduced the charging and discharging time significantly. However, the fully stacked fine fibre wool packed tank showed a remarkable 85% reduction in solidification time and a 37.4% reduction in melting time compared to the conventional shell and tube tank. Moreover, it showed a higher mean power than all the developed cases, with 414% enhancement during the discharging cycle and 42% during the charging cycle. Thus, the incorporation of metal wool into a tank is an effective way to enhance its thermal performance., This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement N. 101036910 (StoRIES). This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31- MCIN/AEI/10.13039/501100011033/FEDER, UE and RED2022-134219-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic heat transfer model for thermal energy storage using metal wool–phase change material composites

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • López-Román, Antón
  • Prieto, Cristina
Decarbonisation of the energy sector is critical for climate change mitigation, with the power sector remaining a major contributor to global emissions. Concentrating solar power (CSP) technology combined with thermal energy storage (TES) presents a promising solution to overcome this challenge. TES systems, particularly those utilising phase change materials (PCMs), offer efficient energy storage by harnessing latent heat, enabling reliable power generation, and providing high-temperature heat for industrial processes. This research introduces a heat transfer model designed to simulate the thermal behaviour of TES systems utilising wool–PCM composites as storage medium. The mathematical model was implemented on the OpenModelica platform and it is intended to be incorporated into a simulation tool currently being developed by the authors to assess the performance of CSP plants under dynamic conditions. The model was validated by comparing the simulation results with the experimental measurements of the temperature within the composite domain during both the charging and discharging cycles. The simulations replicated key experimental parameters, including geometry, material properties, and boundary conditions, and evaluated two configurations with coarse and fine wool fibres. The results demonstrated good agreement with the experimental data for coarse wool, with a root mean square error (RMSE) of up to 2.29 K. For fine fibres, the RMSE increased to 5.31 K, indicating a larger deviation. Despite these challenges, the model successfully captured the overall thermal response trend and phase transition behaviour observed experimentally. The findings highlight the efficacy and limitations of the proposed thermal model and emphasise the necessity for advanced macroscopic-scale effective thermal conductivity modelling approaches for such composites that integrate the influence of pore-scale characteristics (i.e., volume change). This research will advance the current state-of-the-art in this field and will mitigate the discrepancies identified in this study when these models are applied in practice. This integration is crucial for enhancing the accuracy and improving the time simulation of large-scale TES systems in CSP applications., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/ 501100011033/FEDER, UE). Funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/ AEI /10.13039/501100011033) (RED2024-153629-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of cascade finned shell and tube TES tanks with organic phase change materials

  • Megra, Kassahun Tadesse
  • Mani Kala, Saranprabhu
  • Peccolo, Simone
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
Latent heat thermal energy storage (TES) systems using phase change materials (PCMs) are promising for mitigating renewable energy intermittency and improving waste heat recovery, due to their high energy density and near-constant operating temperature. To increase energy storage capacity, PCMs can operate beyond their melting point, but this induces thermal stress. Cascade TES systems overcome these issues by using multiple PCMs with different melting points and enable multilevel energy utilisation. A custom-built experimental setup is used to investigate the charging and discharging characteristics of a three-stage cascade TES system using organic PCMs in finned shell and tube TES tanks. The results show that cascade systems can be effectively integrated over a wide temperature range, storing a higher energy than single stage systems., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+. This work is also Funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermal Energy Storage Using Phase Change Materials in High-Temperature Industrial Applications: Multi-Criteria Selection of the Adequate Material

  • Cabeza, Luisa F.
  • Martínez, Franklin R.
  • Borri, Emiliano
  • Ushak, Svetlana
  • Prieto, Cristina
Thermal energy storage (TES) plays an important role in industrial applications with intermittent generation of thermal energy. In particular, the implementation of latent heat thermal energy storage (LHTES) technology in industrial thermal processes has shown promising results, significantly reducing sensible heat losses. However, in order to implement this technology, a proper selection of materials is important. In this study, a new multi-criteria phase change material (PCM) selection methodology is presented, which considers relevant factors from an application and material handling point of view, such as hygroscopicity, metal compatibility (corrosion), level hazard, cost, and thermal and atmospheric stability. The methodology starts after setting up the system requirements where the PCM will be used, then a material screening is able to find all possible candidates that are listed with all available properties as listed before. Then, a color map is produced, with a qualitative assessment of material properties drawbacks, hazard level, melting enthalpy, and price. The experimentation starts with a preliminary set of tests on hygroscopicity and one-week corrosion test, which allows disregarding PCMs and selecting a short list of potential PCMs that would need further characterization before the final selection., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31—MCIN/AEI/10.13039/501100011033/FEDER, UE), and Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (RED2022-134219-T). TED2021-132216A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union by NextGenerationEU/PRTR. Franklin R. Martinez Alcocer thanks the National Doctorate Scholarship for foreign students ANID 2021 Folio 21211932 for the financial support in the research. S. Ushak acknowledges to ANID/PUENTE N◦ 1522A0006 and ANID/FONDECYT REGULAR N◦ 1231721 projects.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance benchmark of thermal energy storage concepts in concentrating solar power

  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
Thermal energy storage (TES) plays a critical role in enhancing the efficiency and dispatchability of concentrating solar power (CSP) plants by mitigating solar energy intermittency. Although molten salts remain the dominant TES solution, alternative systems such as solid-state and latent heat storage offer promising advantages. This study analyses the performance impact of different TES technologies—two-tank molten salt, concrete-based storage, and phase change materials (PCMs)—when integrated into CSP systems. By comparing key performance indicators under identical operating conditions, this study provides insights into the suitability of each TES technology for CSP plant operations. The results highlight the trade-offs between energy yield, efficiency, and footprint. All three concepts demonstrated comparable performance at both the system and TES levels, with disparities of less than 3 %. The advantage of PCM lies in its substantial volume reduction of approximately 27 % compared to molten salt, whereas concrete TES achieves similar outcomes with a slight increase in volume relative to molten salt TES volume., This project was funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033 and FSE+) (PID2024-156068OB-C21). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.