Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reaching a consensus on indoor photovoltaics testing

  • Hoye, Robert L.Z.|||0000-0002-7675-0065
  • Koutsourakis, George
  • Freitag, Marina
  • Jehl Li-Kao, , ZacharieJehl
  • Österberg, Thomas
  • Aliwell, Simon
  • Bellanger, Mathieu
  • Brown, Thomas M.
  • Brunetti, Francesca
  • Carnie, Matthew J.
  • Chakraborty, Abhisek
  • Grancini, Giulia
  • Kärhä, Petri
  • Kauer, Matthias
  • Kirchartz, Thomas
  • Lin, Chieh-Ting
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Long, Yean-San
  • Öz, Senol
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Saucedo, Edgardo
  • Vivo, Paola
  • Leow, Shin Woei
  • Wojciechowski, Konrad
  • Zampetti, Andrea
  • Zhou, Ru
  • Züfle, Simon
  • Burwell , Gregory
Most authors are part of a consortium that meets through the Indoor Photovoltaics Conference (IPVC), which is organized in conjunction with the MENTOR Marie Skłodowska-Curie Actions Doctoral Network. The IPVC is held annually, and brings together groups from academia, companies commercializing indoor photovoltaic (IPV) and Internet of Things (IoT) devices, national laboratories, and equipment manufacturers. More information can be found at https://projects.tuni.fi/mentor/. Another Marie Skłodowska-Curie Doctoral Network (MASAUTO), funded at the same time, also focuses on IoT development, including IPVs, as well as energy storage and low-power memory (http://masauto-net.eu/).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Transient numerical model of a latent heat thermal energy storage unit at around 222ºC for its integration with a high-temperature-heat-pump

  • Toloza, Juan
  • Payá, Jorge
  • Barceló, Francisco
Latent heat thermal energy storage (LHTES) systems are critical for improving the flexibility and efficiency of many applications. For instance, they can be an added value for industrial process heat applications, when combined with High-Temperature-Heat-Pumps (HTHPs). However, the low thermal conductivity of most phase change materials (PCM) requires optimizing the heat exchanger geometry, encapsulation solutions or metal wools to reach higher heat transfer rates. Among these alternatives, shell and tube configurations are interesting for their high compactness, structural robustness, and capacity for thermal enhancement. This work presents a transient numerical model developed in the Modelica language, for the simulation of a vertical shell and tube LHTES storage unit. Using a eutectic NaNO₃–KNO₃ mixture, the model employs an effective heat capacity method and finite volume discretization. This flexible framework can enable the simulation of different PCMs and heat transfer fluids, aiming for an efficient tool for the design and optimization of industrial storage systems., This work has been performed within the European project CHASE (Combined Heat pump and thermal Storage for Energy efficient industry). The research was funded by CETPartnership, the Clean Energy Transition Partnership under the 2023 joint call for research proposals, co-funded by the European Commission (GA N°101069750) and in Spain with the funding organization “Agencia Estatal de Investigación” of the “Ministerio de Ciencia, Innovación y Universidades”, ref. MICIU/AEI/10.13039/501100011033/UE owing to the call “Proyectos de Colaboración Internacional, convocatoria 2024-2”, ref. PCI2024-155036-2.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Metal alloy phase change material for thermal energy storage systems: characterization and compatibility studies

  • Mani Kala, Saranprabhu
  • Wolf, Gerhar
  • Borri, Emiliano
  • Reinholz, Jonas
  • Kugler, Felix
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) as an energy storage medium offer several advantages; however, drawbacks appear when employing inorganic PCM, including low thermal conductivity and corrosion issues. In this study, a ZnAl6 metal alloy PCM was selected, and its potential for use in TES systems was explored. The thermophysical properties of the metal alloy were measured, including latent heat, melting point, solidification point, and degradation temperature. The metal alloy PCM was further evaluated for its compatibility with a stainless-steel tube by subjecting it to thermal cycling in a furnace, encompassing 1,000 cycles between its melting and solidification temperatures. FeAl phases were observed to form at the junction near the stainless-steel tube in contact with the PCM. Furthermore, the ZnAl6 eutectic composition remained stable even after 1000 thermal cycles., This research was funded by the German Ministry of Education and Research under grant no. 03SF0541 and the CETPartnership, the Clean Energy Transition Partnership is a transnational joint programming initiative to boost and accelerate the energy transition, building upon regional and national RDI funding programmes. The initiative is receiving funding from the European Union’s research and innovation programme “Horizon Europe” under grant agreement No 101069750. This paper is part of the PID2024-156068OB-C21 and RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is also funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T).Also, this work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Electric Heating Design for Decarbonized Industrial Steam: A Metallic Phase Change Material Power-to-Heat System

  • Cuenca-Romero, Ana
  • Barnetche, Magdalena
  • Prieto, Cristina
  • Al-Saaidi,, Hussein
  • Reinholz, Jonas
  • Melka, Bartlomiej
This study analyzes ways to electrify a thermal energy storage tank with direct steam generation in terms of implementation, power and temperature requirements and performance. The analyzed storage tank unit contains a metallic phase change material as thermal storage medium, with a maximum operation temperature of 430 °C, a charging power of 135 kW and delivers steam at 165 ºC and 6.5 barg. The heating methods analyzed were immersion heaters, heat tracing and heat bands. CFD simulations of a simplified tank geometry were carried out to analyze the different heating methods and the results show that all are applicable in terms of heating up and melting the phase change material. Heat bands deliver higher power per surface area, meeting the desired charging time, but limited contact surface and natural convection lead to significant temperature gradients., This work was partially funded by European Union's HORIZON MSCA Doctoral Network program under grant agreement 101072537 TOPCSP. This research was funded by CETP, the Clean Energy Transition Partnership under the 2022 CETP joint call for research proposals, co-funded by the European Commission (GA N°101069750) and with the funding organizations detailed on https://cetpartnership.eu/fundingagencies-and-call-modules. The project code SERA-20231002 has received funding from the Centro para el Desarrollo Tecnológico y la Innovación (CDTI).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Electric Heating Design for Decarbonized Industrial Steam: A Metallic Phase Change Material Power-to-Heat System

  • Cuenca-Romero, Ana
  • Barnetche, Magdalena
  • Prieto, Cristina
  • Al-Saaidi,, Hussein
  • Reinholz, Jonas
  • Melka, Bartlomiej
This study analyzes ways to electrify a thermal energy storage tank with direct steam generation in terms of implementation, power and temperature requirements and performance. The analyzed storage tank unit contains a metallic phase change material as thermal storage medium, with a maximum operation temperature of 430 °C, a charging power of 135 kW and delivers steam at 165 ºC and 6.5 barg. The heating methods analyzed were immersion heaters, heat tracing and heat bands. CFD simulations of a simplified tank geometry were carried out to analyze the different heating methods and the results show that all are applicable in terms of heating up and melting the phase change material. Heat bands deliver higher power per surface area, meeting the desired charging time, but limited contact surface and natural convection lead to significant temperature gradients., This work was partially funded by European Union's HORIZON MSCA Doctoral Network program under grant agreement 101072537 TOPCSP. This research was funded by CETP, the Clean Energy Transition Partnership under the 2022 CETP joint call for research proposals, co-funded by the European Commission (GA N°101069750) and with the funding organizations detailed on https://cetpartnership.eu/fundingagencies-and-call-modules. The project code SERA-20231002 has received funding from the Centro para el Desarrollo Tecnológico y la Innovación (CDTI).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Transient numerical model of a latent heat thermal energy storage unit at around 222ºC for its integration with a high-temperature-heat-pump

  • Toloza, Juan
  • Payá, Jorge
  • Barceló, Francisco
Latent heat thermal energy storage (LHTES) systems are critical for improving the flexibility and efficiency of many applications. For instance, they can be an added value for industrial process heat applications, when combined with High-Temperature-Heat-Pumps (HTHPs). However, the low thermal conductivity of most phase change materials (PCM) requires optimizing the heat exchanger geometry, encapsulation solutions or metal wools to reach higher heat transfer rates. Among these alternatives, shell and tube configurations are interesting for their high compactness, structural robustness, and capacity for thermal enhancement. This work presents a transient numerical model developed in the Modelica language, for the simulation of a vertical shell and tube LHTES storage unit. Using a eutectic NaNO₃–KNO₃ mixture, the model employs an effective heat capacity method and finite volume discretization. This flexible framework can enable the simulation of different PCMs and heat transfer fluids, aiming for an efficient tool for the design and optimization of industrial storage systems., This work has been performed within the European project CHASE (Combined Heat pump and thermal Storage for Energy efficient industry). The research was funded by CETPartnership, the Clean Energy Transition Partnership under the 2023 joint call for research proposals, co-funded by the European Commission (GA N°101069750) and in Spain with the funding organization “Agencia Estatal de Investigación” of the “Ministerio de Ciencia, Innovación y Universidades”, ref. MICIU/AEI/10.13039/501100011033/UE owing to the call “Proyectos de Colaboración Internacional, convocatoria 2024-2”, ref. PCI2024-155036-2.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Metal alloy phase change material for thermal energy storage systems: characterization and compatibility studies

  • Mani Kala, Saranprabhu
  • Wolf, Gerhar
  • Borri, Emiliano
  • Reinholz, Jonas
  • Kugler, Felix
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) as an energy storage medium offer several advantages; however, drawbacks appear when employing inorganic PCM, including low thermal conductivity and corrosion issues. In this study, a ZnAl6 metal alloy PCM was selected, and its potential for use in TES systems was explored. The thermophysical properties of the metal alloy were measured, including latent heat, melting point, solidification point, and degradation temperature. The metal alloy PCM was further evaluated for its compatibility with a stainless-steel tube by subjecting it to thermal cycling in a furnace, encompassing 1,000 cycles between its melting and solidification temperatures. FeAl phases were observed to form at the junction near the stainless-steel tube in contact with the PCM. Furthermore, the ZnAl6 eutectic composition remained stable even after 1000 thermal cycles., This research was funded by the German Ministry of Education and Research under grant no. 03SF0541 and the CETPartnership, the Clean Energy Transition Partnership is a transnational joint programming initiative to boost and accelerate the energy transition, building upon regional and national RDI funding programmes. The initiative is receiving funding from the European Union’s research and innovation programme “Horizon Europe” under grant agreement No 101069750. This paper is part of the PID2024-156068OB-C21 and RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is also funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T).Also, this work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.