Pasar al contenido principal

HETEROUNIONES DE PEROVSKITAS LIBRES DE PLOMO Y MXENES PARA LA CONVERSION DE ENERGIA SOLAR

PID2022-143344OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain in Halide Perovskites and Solar Cell Stability, Accelerated Stress Tests under Bias Voltage

  • Baumann, Fanny|||0000-0003-0203-5971
  • Karimipour, Masoud|||0000-0002-6619-4798
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Pouteaux, Rémy
  • Alcalá Ibarra, Alex
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Santiso, José|||0000-0003-4274-2101
  • Lira-Cantu, Monica|||0000-0002-3393-7436
The lifespan of halide perovskite solar cells (PSCs) is currently a major concern for the implementation and commercialization of the technology. Tensile and compressive strain alters the halide perovskite (HP) lattice under operando conditions, affecting PSC stability. However, the mechanisms governing strain responses are still unknown. In this work, we monitored the evolution of strain in PSCs during accelerated stability tests under continuous light irradiation and bias-voltage. Additive engineering led to a compression of the HP lattice, improving PSC stability. The temporal evolution of the HP lattice, together with the electrical response of devices employing modified and reference HP, was tracked by in situ X-ray diffraction, photoluminescence, and quasi in situ electrochemical impedance spectroscopy. Our results demonstrate a good correlation between lattice expansion (strain) and the device's current decay and stability. Additionally, and contrary to the current understanding, we observed that lattice compression in HP was not sufficient to ensure protection against degradation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The Roles of Ion Migration on Perovskite Solar Cell Operational Stability at Various Illumination Intensities

  • Tanko, Kenedy T.|||0000-0002-2466-7104
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Vahedigharehchopogh, Naji|||0000-0001-7063-0858
  • Baumann, Fanny|||0000-0003-0203-5971
  • Karimipour, Masoud|||0000-0002-6619-4798
  • Miranda-Gamboa, Ramsés Alejandro|||0000-0003-1086-4905
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Monitoring the stability of perovskite solar cells (PSCs) under operational conditions is crucial for their development. This study integrates maximum power point (MPP) tracking with quasi in-situ electrochemical impedance spectroscopy at successive intervals to elucidate the temporal evolution of degradation mechanisms in PSCs. The gradual losses in photocurrent, photovoltage, and fill factor during MPP tracking were attributed to alterations in recombination processes, kinetic constants, shunt pathways, and series resistances, each manifesting at distinct phases of the PSC stability assessment. Notably, these variations correlated with a progressive increase in ionic density and mobility within the perovskite layer, as evidenced by a shift in the low-frequency ionic response and a 0.13 eV reduction in ionic activation energy. This apparent enhancement in ionic conductivity was more pronounced under illuminance levels below 1000Lx, predominantly affecting shunt resistance and leading to significant implications for indoor photovoltaic performance. The reported methodology offers a straightforward, non-destructive, and effective means to augment conventional PSC stability analyses across various lighting conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stabilizing perovskite solar cells at 85 °C via additive engineering and MXene interlayers

  • Baumann, Fanny|||0000-0003-0203-5971
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Karimipour, Masoud|||0000-0002-6619-4798
  • Vahedigharehchopogh, Naji|||0000-0001-7063-0858
  • Santiso, José|||0000-0003-4274-2101
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Miranda-Gamboa, Ramsés Alejandro|||0000-0003-1086-4905
  • Tian, Zhenchuan|||0009-0002-5741-9868
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Lira-Cantu, Monica|||0000-0002-3393-7436
The commercialization of Perovskite Solar Cells (PSCs) is currently a reality. The detection of early instabilities, especially at high temperatures is vital for the successful widespread implementation of the technology. Commercial devices must sustain temperatures as high as 85 °C in order to surpass standardized tests and certification for the final PV product. However, in situ and operando stability analysis and detailed structural and electronic properties of full devices are still rarely found in the literature. In this work, we carried out in situ operational stability testing at 85 °C, complemented by in situ X-ray diffraction, impedance spectroscopy, photoluminescence, current-voltage measurements and electron microscopy. Our results demonstrate a large lattice expansion in the halide perovskite which provokes a clear voltage drop in the PSC. While no changes in lattice constants were observed over time at 85 °C, we noticed a reversible formation of an amorphous "carbon rich" surface shell material surrounding the perovskite grains. This material is linked to a decrease in shunt resistance, and the increase of ionic conductivity. The latter triggered the gradual photovoltaic performance loss observed in our PSC at high temperature. Additionally, we demonstrate the possibility to delay this PSC degradation by employing stability-enhancing methods such as additive engineering and the application of functionalized 2D Ti3C2 MXene interlayers to the PSC. Our work showcases the value of complementing stability tests with advanced characterization, significantly showcasing the value of in operando structural studies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reaching a consensus on indoor photovoltaics testing

  • Hoye, Robert L.Z.|||0000-0002-7675-0065
  • Koutsourakis, George
  • Freitag, Marina
  • Jehl Li-Kao, , ZacharieJehl
  • Österberg, Thomas
  • Aliwell, Simon
  • Bellanger, Mathieu
  • Brown, Thomas M.
  • Brunetti, Francesca
  • Carnie, Matthew J.
  • Chakraborty, Abhisek
  • Grancini, Giulia
  • Kärhä, Petri
  • Kauer, Matthias
  • Kirchartz, Thomas
  • Lin, Chieh-Ting
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Long, Yean-San
  • Öz, Senol
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Saucedo, Edgardo
  • Vivo, Paola
  • Leow, Shin Woei
  • Wojciechowski, Konrad
  • Zampetti, Andrea
  • Zhou, Ru
  • Züfle, Simon
  • Burwell , Gregory
Most authors are part of a consortium that meets through the Indoor Photovoltaics Conference (IPVC), which is organized in conjunction with the MENTOR Marie Skłodowska-Curie Actions Doctoral Network. The IPVC is held annually, and brings together groups from academia, companies commercializing indoor photovoltaic (IPV) and Internet of Things (IoT) devices, national laboratories, and equipment manufacturers. More information can be found at https://projects.tuni.fi/mentor/. Another Marie Skłodowska-Curie Doctoral Network (MASAUTO), funded at the same time, also focuses on IoT development, including IPVs, as well as energy storage and low-power memory (http://masauto-net.eu/).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalized MXene/halide perovskite heterojunctions for perovskite solar cells Stable under real outdoor conditions

  • Karimipour, Masoud
  • Paingott Parambil, Ashitha
  • Tabah, Kenedy
  • Zhang, Tiankai
  • Gao, Feng
  • Lira-Cantú, Mónica
Despite the performance improvement in perovskite solar cells (PSCs) when MXenes are employed as transport layers, device stability studies are still missing. Especially under real outdoor conditions where devices are subjected to the synergy of multiple stressors. In this work, functionalized 2D titanium carbide (Ti3C2) MXene is employed in normal PSC configuration, at the interface between the halide perovskite and the hole transport layer. The functionalization of the Ti3C2 MXene is made utilizing the same organic additive passivating the halide perovskite layer. The functionalizing strategy creates a continuous link between the MXene and the halide perovskite layer. Champion MXene-based PSCs revealed a ≈22% efficiency, in comparison with the control device showing 20.56%. Stability analyses under ISOS protocols under different conditions (dark, continuous light irradiation and real outdoor analysis) reveal that the enhancement of the PSCs lifespan is always observed when the MXene layer is employed. Analysis under continuous light irradaition (ISOS-L) reveal an almost 100% retention of the efficiency for the MXene-modified device, and outdoor testing (ISOS-O) carried out for > 600 h reveals a T80 of ≈600 h, while the control device degrades completely. To the best of the authors' knowledge, this is the first report of the stability assesment of MXene-based PSCs carried out under real outdoor (ISOS-O) conditions., The authors give thanks to the Spanish State Research Agency for the grant Self-Power (PDI2022-143344OB-100 / AEI / 10.13039/501100011033). This work was part of the project PCI2020-112185, granted by MCIN/AEI/ 10.13039/501100011033 project and the European Union “NextGenerationEU”/PRTR. To the OrgEnergy Excelence Network (CTQ2016-81911- REDT), to the Agencia de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2021 SGR 01617 and the Xarxa d'R+D+I Energy for Society (XRE4S). Part of this work was under Materials Science Ph.D. Degree for A.P. and K.T. of the Universitat Autonoma de Barcelona (UAB, Spain). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The authors thank the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under grant no. SEV-2017-0706 for the postdoctoral contract to M.K. F.G. would like also to thank the supporting fund from the Swedish Energy Agency (P2022-00756)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Strain in Halide Perovskites and Solar Cell Stability: Accelerated Stress Tests under Bias Voltage

  • Baumann, Fanny
  • Karimipour, Masoud
  • Padilla-Pantoja, Jessica
  • Chávez-Angel, Emigdio
  • Caicedo, José Manuel
  • Pouteaux, Rémy
  • Alcalá Ibarra, Alex
  • Raga, Sonia R.
  • Santiso, José
  • Lira-Cantú, Mónica
The lifespan of halide perovskite solar cells (PSCs) is currently a major concern for the implementation and commercialization of the technology. Tensile and compressive strain alters the halide perovskite (HP) lattice under operando conditions, affecting PSC stability. However, the mechanisms governing strain responses are still unknown. In this work, we monitored the evolution of strain in PSCs during accelerated stability tests under continuous light irradiation and bias-voltage. Additive engineering led to a compression of the HP lattice, improving PSC stability. The temporal evolution of the HP lattice, together with the electrical response of devices employing modified and reference HP, was tracked by in situ X-ray diffraction, photoluminescence, and quasi in situ electrochemical impedance spectroscopy. Our results demonstrate a good correlation between lattice expansion (strain) and the device's current decay and stability. Additionally, and contrary to the current understanding, we observed that lattice compression in HP was not sufficient to ensure protection against degradation., We thank Prof. Anita Ho-Baillie and Dr. Jae Sung Yun for constructive comments on electrode fabrication. This work was supported by the Spanish Ministry of Science and Innovation (MCIN) and the AEI under the Project No. PID2022-143344OB-I00. This work constitutes part of the Materials Science Ph.D. Program for F.B. at the Universitat Autonoma de Barcelona (UAB, Spain), and the authors acknowledge the Spanish Ministry of Science and Innovation for providing the predoctoral contract to F.B. with reference No. PRE2020-092669 of the Project No. SEV-2017-0706-20-3. S.R.R. acknowledges the support from “la Caixa” Foundation (ID 100010434) with fellowship LCF/BQ/PI20/11760024 and Grant PID2021-122349OAI00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe. ICN2, including the postdoctoral contract to M.K., was supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Thanks are extended to Agencia de Gestio d’Ajuts Universitaris i de Recerca for Grant No. SGR 01617 and the Xarxa d’ R + D + I Energy for Society. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. E.C.A. acknowledges support from MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. We would like to thank Dámaso Torres for his assistance with graphical design., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stability and reliability of perovskite photovoltaics: Are we there yet?

  • Tabah, Kenedy
  • Tian, Zhenchuan
  • Raga, Sonia R.
  • Xie, Haibing
  • Katz, Eugene A.
  • Lira-Cantú, Mónica
The power-conversion efficiency (PCE) of perovskite solar cells (PSCs) has exceeded in 2024 the theoretical single-junction Shockley-Queisser limit of 33.7% with the perovskite/silicon tandem version. The commercialization of the technology is now a reality with the PV industry demonstrating its first commercial products. Many companies have shown excellent module reliability with most of them passing the IEC standardization (required for commercial silicon solar cells). In this article, we want to bring some light on the most intriguing question regarding the stability and reliability of PSC technology: Are we there yet? Issues on stability are still under strong investigation and research on the topic has increased exponentially in the last 10 years. Since some companies have already promised excellent reliability of their modules, with 80% retention of the initial PCE after 25 years, the following  two or three years will be crucial to demonstrate these pledges. In this work, we present an outline of the most stable PSC devices reported to date and discuss the most important strategies leading to highly stable devices., The authors give thanks to the Spanish State Research Agency for the grant PerMXSol (PID2022-143344OB-I00). The authors acknowledge the ORgEnergy Excellence Network (CTQ2016-81911-REDT), to the Agencia de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2021 SGR 01617 and the Xarxa d'R+D+I Energy for Society (XRE4S). Part of this work was under Materials Science PhD degree for K.T.T. and Z.T. of the Universitat Autònoma de Barcelona (UAB, Spain). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The authors thank the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant No. SEV-2017-0706 for the postdoctoral contract, and the PhD scholarship PRE2022-000291 granted to Z.T. E.A.K. acknowledges financial support from the European Union through the TESTARE Project (Grant ID: 101079488)., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. E.A.K. acknowledges financial support from the European Union through the TESTARE Project (Grant ID: 101079488). M.L-C. gives thanks to the Spanish State Research Agency for the Grant PerMXSol (PID2022-143344OB-I00)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Me-4PACz Functionalized MXene for Halide Perovskite Solar Cells

  • Karimipour, Masoud
  • Oliveras, Nil Monrós
  • Tian, Zhenchuan
  • Salutari, Francesco
  • Spadaro, Maria Chiara
  • Zhang, Tiankai
  • Vahedigharehchopogh, Naji
  • Arbiol, Jordi
  • Gao, Feng
  • Lira-Cantú, Mónica
Interfacial passivation employing 2D Ti3C2 MXenes has proved to be an excellent strategy to optimize band alignment and passivate defects, leading to the reduction of non-radiative recombination in Perovskite Solar Cells (PSCs). Here in, the synthesis and functionalization of Ti3C2 MXene are reported with the [4-(3,6-Dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid molecule (MXene:Me-4PACz), which is proved by XRD and HRTEM-EELS analyses. Its application at the interface between the halide perovskite (HP) and the Spiro-OMeTAD in normal configuration PSCs, results in the enhancement of indoor and outdoor stability. The MXene:Me-4PACz nanomaterial is obtained in the form of nanoneedles, which, applied in complete PSCs, resulted in a power conversion efficiency (PCE) of ≈21.5%, in comparison with the control device with ≈20.1%. The modified device showed a T88 operational stability obtained at 1000 h for ISOS-L-1 and T50 at ≈1000 h for ISOS-O-2. While, all the control devices degraded 55% after 1000 h under ISOS-L and almost 100% after 900 h under ISOS-O-2. Characterization analyses indicate that the efficiency and stability enhancement is due to the improved energy band alignment and charge extraction, to the increased perovskite surface hydrophobicity, and the significant reduction of deep and shallow trap states., The authors give thanks to the Spanish State Research Agency for the grant PerMXSol (PID2022-143344OB-I00). This work was part of the project PCI2020-112185, granted by MCIN/AEI/10.13039/501100011033 project and the “NextGenerationEU”/PRTR. To the OrgEnergy Excelence Network (CTQ2016-81911- REDT), to the Agencia de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2021 SGR 01617 and the Xarxa d'R+D+I Energy for Society (XRE4S). Part of this work was under Materials Science Ph.D. Degree for Z.T. of the Universitat Autonoma de Barcelona (UAB, Spain). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (grant no. European Union SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The authors thank the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under grant no. SEV-2017-0706 for the postdoctoral contract to M.K. and the PhD scholarship PRE2022-000291 granted to Z.T. F.G. would also like to thank the supporting fund from the Swedish Energy Agency (P2022-00756). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. The authors thank funding from Horizon Europe through the PathFinder Open project SOLARUP (project number 101046297). ICN2 is a founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epoxy-based encapsulation of halide perovskite solar cells for outdoor stability assessment (ISOS-O)

  • Tabah, Kenedy
  • Karimipour, Masoud
  • Kieftenburg, Rico
  • Alcalá Ibarra, Alex
  • Lira-Cantú, Mónica
A key factor in the widespread commercialization of perovskite solar cells (PSCs) is the need for comprehensive stability analysis, particularly under real-world outdoor conditions across diverse global locations. However, a simple and reliable encapsulation strategy for outdoor stability analysis that can be implemented at the laboratory level is currently missing, hindering progress in the study of PSC lifetime. In this work, we present a simple and effective two-step strategy to encapsulate laboratory-scale PSCs at room temperature, applying commercially available epoxies. We have examined nine epoxies, including single and bicomponent epoxies, as well as air-curing and UV-curing epoxies. The possible reaction of the epoxy’s fumes with the halide perovskite during epoxy curing was monitored by means of XRD analyses, SEM imaging, FTIR, and Raman spectroscopies, as well as via stability assessment of devices following ISOS protocols. The encapsulation method was analyzed in different types of PSCs, including normal n-i-p configuration applying Au and carbon electrodes, and inverted p-i-n configuration with Ag contacts. The devices, both in normal and inverted configurations, were also analyzed at different locations (Spain, Israel, and Germany), showing impressive stability under the ISOS-O protocol, demonstrating its viability for the analysis of lab-scale PSC devices. We hope that the disclosure of this encapsulation strategy will permit the PSC community to carry out extensive lifetime stability analyses, allowing the advancement of the PSC technology and its commercialization, The authors give thanks to the Spanish State Research Agency for the grant PerMXSol (Grant No. PID2022-143344OB-I00). The ICN2 is supported by the Severo Ochoa Centers of Excellence program (Grant No. CEX2021-001214-S), both funded by MCIN/AEI/10.13039.501100011033, and by the CERCA, Generalitat de Catalunya. To the Spanish Ministry of Science, Innovation, and Universities (MICIU) and the Research State Agency (AEI) with DOI: 10.13039/501100011033, the DOI for the project NextPVNet ref Grant No. RED2024-154A8-T. Thanks to Agencia de Gestio d’Ajuts Universitaris i de Recerca for Grant No. SGR 01617 and Xarxa d’ R + D + I Energy for Society. The authors thank the Ben-Gurion Solar Energy Center, Swiss Inst. for Dryland Environmental and Energy Research, the Jacob Blaustein Institutes for Desert Research (BIDR), Ben-Gurion University of the Negev, Sede Boker Campus, Midereshet Ben-Gurion 84990, Israel, and the PV systems performance analysis group at PVcomB, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, 12489 Berlin, Germany, for providing their outdoor stability testing facilities for the experiments reported in this work. This work has been carried out within the framework of the doctorate in Materials Science at the Autonomous University of Barcelona., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilizing perovskite solar cells at 85 °C via additive engineering and MXene interlayers

  • Baumann, Fanny
  • Padilla-Pantoja, Jessica
  • Caicedo, José Manuel
  • Karimipour, Masoud
  • Vahedigharehchopogh, Naji
  • Santiso, José
  • Ballesteros, Belén
  • Miranda Gamboa, Ramsés A.
  • Tian, Zhenchuan
  • Raga, Sonia R.
  • Lira-Cantú, Mónica
The commercialization of Perovskite Solar Cells (PSCs) is currently a reality. The detection of early instabilities, especially at high temperatures is vital for the successful widespread implementation of the technology. Commercial devices must sustain temperatures as high as 85 °C in order to surpass standardized tests and certification for the final PV product. However, in situ and operando stability analysis and detailed structural and electronic properties of full devices are still rarely found in the literature. In this work, we carried out in situ operational stability testing at 85 °C, complemented by in situ X-ray diffraction, impedance spectroscopy, photoluminescence, current–voltage measurements and electron microscopy. Our results demonstrate a large lattice expansion in the halide perovskite which provokes a clear voltage drop in the PSC. While no changes in lattice constants were observed over time at 85 °C, we noticed a reversible formation of an amorphous “carbon rich” surface shell material surrounding the perovskite grains. This material is linked to a decrease in shunt resistance, and the increase of ionic conductivity. The latter triggered the gradual photovoltaic performance loss observed in our PSC at high temperature. Additionally, we demonstrate the possibility to delay this PSC degradation by employing stability-enhancing methods such as additive engineering and the application of functionalized 2D Ti3C2 MXene interlayers to the PSC. Our work showcases the value of complementing stability tests with advanced characterization, significantly showcasing the value of in operando structural studies., The authors acknowledge the Spanish Ministry of Science and Innovation for the predoctoral contract to F. B. with Reference No. PRE2020-092669 of the Project No. SEV-2017-0706-20-3 and the contract of N. V. with ref. PRE2022-103001 of the project CEX2021-001214-S-20-6. This work constitutes part of the Materials Science PhD Program for F. B., N. V. and Z. T. at the Universitat Autonoma de Barcelona (UAB, Spain). This project was funded by the project PerMXSol (ref. PID2022-143344OB-I00), project TAMPOPO, (ref. PID2021-122349OAI00) and project SPOT-IT (ref. PCI2023-146003-2) funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, co-financed by the European Union. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. Thanks to Agencia de Gestio d’Ajuts Universitaris i de Recerca for Grant No. SGR 01617 and the Xarxa d’ R + D + I Energy for Society. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. We would like to acknowledge the team from Syre (syre.ai), especially Dr Brian Carlsen, for lending us their software prototype facilitating steps in the automatic processing of results from experiments. We would like to thank Juan A. Anta and colleagues for their help in setting up the drift diffusion simulations. We would like to thank Damaso Torres for his aid with graphic design, and Rafael León Lavin for modifications of the XRD holder and LITOS customized sample stages., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Roles of Ion Migration on Perovskite Solar Cell Operational Stability at Various Illumination Intensities

  • Tanko, Kenedy T.
  • Raga, Sonia R.
  • Vahedigharehchopogh, Naji
  • Baumann, Fanny
  • Karimipour, Masoud
  • Miranda Gamboa, Ramsés A.
  • Lira-Cantú, Mónica
This article also appears in: Indoor Photovoltaics, Monitoring the stability of perovskite solar cells (PSCs) under operational conditions is crucial for their development. This study integrates maximum power point (MPP) tracking with quasi in-situ electrochemical impedance spectroscopy at successive intervals to elucidate the temporal evolution of degradation mechanisms in PSCs. The gradual losses in photocurrent, photovoltage, and fill factor during MPP tracking were attributed to alterations in recombination processes, kinetic constants, shunt pathways, and series resistances, each manifesting at distinct phases of the PSC stability assessment. Notably, these variations correlated with a progressive increase in ionic density and mobility within the perovskite layer, as evidenced by a shift in the low-frequency ionic response and a 0.13 eV reduction in ionic activation energy. This apparent enhancement in ionic conductivity was more pronounced under illuminance levels below 1000Lx, predominantly affecting shunt resistance and leading to significant implications for indoor photovoltaic performance. The reported methodology offers a straightforward, non-destructive, and effective means to augment conventional PSC stability analyses across various lighting conditions., This work was supported by SOLAR-ERA.NET Cofund 2 by the Spanish Ministry of Science and Innovation (SMSI) and the AEI under the Project No. PCI2020−112185 and CDTI Project No. IDI-20210171. The ICN2 is supported by the Severo Ochoa Centers of Excellence program (Grant No. CEX2021-001214-S), both funded by MCIN/AEI/10.13039.501100011033, and by the CERCA, Generalitat de Catalunya. Thanks to Agencia de Gestio d’Ajuts Universitaris i de Recerca for the Grant No. SGR 01617 and the Xarxa d’ R + D + I Energy for Society. S.R.R. acknowledges the support from “la Caixa” Foundation (ID 100010434) with fellowship LCF/BQ/PI20/11760024 and Grant PID2021-122349OAI00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe.” This work constitutes part of the Materials Science Ph.D. Program for F.B., N.V. and K.T.T. at the Universitat Autonoma de Barcelona (UAB, Spain), and the authors acknowledge the SMSI for the predoctoral contract of F.B. with ref. PRE2020−092669 of the project SEV-2017-0706-20−3 and the contract of N.V. with ref. PRE2022-103001 of the project CEX2021-001214-S-20−6 and the contract to K.T. through the project PerMXSol (ref. PID2022-143344OB-I00). To the Spanish Ministry of Science, Innovation and Universities and AEI for the Research Network NextPVNet (Ref RED2024-154178-T). The authors thank Prof. Juan Antonio Anta and Prof. Wolfgang Tress for the fruitful discussions., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed