Pasar al contenido principal

CELDAS SOLARES EN TANDEM DE MATERIALES PEROVSKITA Y ORGANICOS

PID2021-122349OA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain in Halide Perovskites and Solar Cell Stability, Accelerated Stress Tests under Bias Voltage

  • Baumann, Fanny|||0000-0003-0203-5971
  • Karimipour, Masoud|||0000-0002-6619-4798
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Pouteaux, Rémy
  • Alcalá Ibarra, Alex
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Santiso, José|||0000-0003-4274-2101
  • Lira-Cantu, Monica|||0000-0002-3393-7436
The lifespan of halide perovskite solar cells (PSCs) is currently a major concern for the implementation and commercialization of the technology. Tensile and compressive strain alters the halide perovskite (HP) lattice under operando conditions, affecting PSC stability. However, the mechanisms governing strain responses are still unknown. In this work, we monitored the evolution of strain in PSCs during accelerated stability tests under continuous light irradiation and bias-voltage. Additive engineering led to a compression of the HP lattice, improving PSC stability. The temporal evolution of the HP lattice, together with the electrical response of devices employing modified and reference HP, was tracked by in situ X-ray diffraction, photoluminescence, and quasi in situ electrochemical impedance spectroscopy. Our results demonstrate a good correlation between lattice expansion (strain) and the device's current decay and stability. Additionally, and contrary to the current understanding, we observed that lattice compression in HP was not sufficient to ensure protection against degradation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The Roles of Ion Migration on Perovskite Solar Cell Operational Stability at Various Illumination Intensities

  • Tanko, Kenedy T.|||0000-0002-2466-7104
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Vahedigharehchopogh, Naji|||0000-0001-7063-0858
  • Baumann, Fanny|||0000-0003-0203-5971
  • Karimipour, Masoud|||0000-0002-6619-4798
  • Miranda-Gamboa, Ramsés Alejandro|||0000-0003-1086-4905
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Monitoring the stability of perovskite solar cells (PSCs) under operational conditions is crucial for their development. This study integrates maximum power point (MPP) tracking with quasi in-situ electrochemical impedance spectroscopy at successive intervals to elucidate the temporal evolution of degradation mechanisms in PSCs. The gradual losses in photocurrent, photovoltage, and fill factor during MPP tracking were attributed to alterations in recombination processes, kinetic constants, shunt pathways, and series resistances, each manifesting at distinct phases of the PSC stability assessment. Notably, these variations correlated with a progressive increase in ionic density and mobility within the perovskite layer, as evidenced by a shift in the low-frequency ionic response and a 0.13 eV reduction in ionic activation energy. This apparent enhancement in ionic conductivity was more pronounced under illuminance levels below 1000Lx, predominantly affecting shunt resistance and leading to significant implications for indoor photovoltaic performance. The reported methodology offers a straightforward, non-destructive, and effective means to augment conventional PSC stability analyses across various lighting conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stabilizing perovskite solar cells at 85 °C via additive engineering and MXene interlayers

  • Baumann, Fanny|||0000-0003-0203-5971
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Karimipour, Masoud|||0000-0002-6619-4798
  • Vahedigharehchopogh, Naji|||0000-0001-7063-0858
  • Santiso, José|||0000-0003-4274-2101
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Miranda-Gamboa, Ramsés Alejandro|||0000-0003-1086-4905
  • Tian, Zhenchuan|||0009-0002-5741-9868
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Lira-Cantu, Monica|||0000-0002-3393-7436
The commercialization of Perovskite Solar Cells (PSCs) is currently a reality. The detection of early instabilities, especially at high temperatures is vital for the successful widespread implementation of the technology. Commercial devices must sustain temperatures as high as 85 °C in order to surpass standardized tests and certification for the final PV product. However, in situ and operando stability analysis and detailed structural and electronic properties of full devices are still rarely found in the literature. In this work, we carried out in situ operational stability testing at 85 °C, complemented by in situ X-ray diffraction, impedance spectroscopy, photoluminescence, current-voltage measurements and electron microscopy. Our results demonstrate a large lattice expansion in the halide perovskite which provokes a clear voltage drop in the PSC. While no changes in lattice constants were observed over time at 85 °C, we noticed a reversible formation of an amorphous "carbon rich" surface shell material surrounding the perovskite grains. This material is linked to a decrease in shunt resistance, and the increase of ionic conductivity. The latter triggered the gradual photovoltaic performance loss observed in our PSC at high temperature. Additionally, we demonstrate the possibility to delay this PSC degradation by employing stability-enhancing methods such as additive engineering and the application of functionalized 2D Ti3C2 MXene interlayers to the PSC. Our work showcases the value of complementing stability tests with advanced characterization, significantly showcasing the value of in operando structural studies.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Strain in Halide Perovskites and Solar Cell Stability: Accelerated Stress Tests under Bias Voltage

  • Baumann, Fanny
  • Karimipour, Masoud
  • Padilla-Pantoja, Jessica
  • Chávez-Angel, Emigdio
  • Caicedo, José Manuel
  • Pouteaux, Rémy
  • Alcalá Ibarra, Alex
  • Raga, Sonia R.
  • Santiso, José
  • Lira-Cantú, Mónica
The lifespan of halide perovskite solar cells (PSCs) is currently a major concern for the implementation and commercialization of the technology. Tensile and compressive strain alters the halide perovskite (HP) lattice under operando conditions, affecting PSC stability. However, the mechanisms governing strain responses are still unknown. In this work, we monitored the evolution of strain in PSCs during accelerated stability tests under continuous light irradiation and bias-voltage. Additive engineering led to a compression of the HP lattice, improving PSC stability. The temporal evolution of the HP lattice, together with the electrical response of devices employing modified and reference HP, was tracked by in situ X-ray diffraction, photoluminescence, and quasi in situ electrochemical impedance spectroscopy. Our results demonstrate a good correlation between lattice expansion (strain) and the device's current decay and stability. Additionally, and contrary to the current understanding, we observed that lattice compression in HP was not sufficient to ensure protection against degradation., We thank Prof. Anita Ho-Baillie and Dr. Jae Sung Yun for constructive comments on electrode fabrication. This work was supported by the Spanish Ministry of Science and Innovation (MCIN) and the AEI under the Project No. PID2022-143344OB-I00. This work constitutes part of the Materials Science Ph.D. Program for F.B. at the Universitat Autonoma de Barcelona (UAB, Spain), and the authors acknowledge the Spanish Ministry of Science and Innovation for providing the predoctoral contract to F.B. with reference No. PRE2020-092669 of the Project No. SEV-2017-0706-20-3. S.R.R. acknowledges the support from “la Caixa” Foundation (ID 100010434) with fellowship LCF/BQ/PI20/11760024 and Grant PID2021-122349OAI00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe. ICN2, including the postdoctoral contract to M.K., was supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Thanks are extended to Agencia de Gestio d’Ajuts Universitaris i de Recerca for Grant No. SGR 01617 and the Xarxa d’ R + D + I Energy for Society. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. E.C.A. acknowledges support from MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. We would like to thank Dámaso Torres for his assistance with graphical design., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilizing perovskite solar cells at 85 °C via additive engineering and MXene interlayers

  • Baumann, Fanny
  • Padilla-Pantoja, Jessica
  • Caicedo, José Manuel
  • Karimipour, Masoud
  • Vahedigharehchopogh, Naji
  • Santiso, José
  • Ballesteros, Belén
  • Miranda Gamboa, Ramsés A.
  • Tian, Zhenchuan
  • Raga, Sonia R.
  • Lira-Cantú, Mónica
The commercialization of Perovskite Solar Cells (PSCs) is currently a reality. The detection of early instabilities, especially at high temperatures is vital for the successful widespread implementation of the technology. Commercial devices must sustain temperatures as high as 85 °C in order to surpass standardized tests and certification for the final PV product. However, in situ and operando stability analysis and detailed structural and electronic properties of full devices are still rarely found in the literature. In this work, we carried out in situ operational stability testing at 85 °C, complemented by in situ X-ray diffraction, impedance spectroscopy, photoluminescence, current–voltage measurements and electron microscopy. Our results demonstrate a large lattice expansion in the halide perovskite which provokes a clear voltage drop in the PSC. While no changes in lattice constants were observed over time at 85 °C, we noticed a reversible formation of an amorphous “carbon rich” surface shell material surrounding the perovskite grains. This material is linked to a decrease in shunt resistance, and the increase of ionic conductivity. The latter triggered the gradual photovoltaic performance loss observed in our PSC at high temperature. Additionally, we demonstrate the possibility to delay this PSC degradation by employing stability-enhancing methods such as additive engineering and the application of functionalized 2D Ti3C2 MXene interlayers to the PSC. Our work showcases the value of complementing stability tests with advanced characterization, significantly showcasing the value of in operando structural studies., The authors acknowledge the Spanish Ministry of Science and Innovation for the predoctoral contract to F. B. with Reference No. PRE2020-092669 of the Project No. SEV-2017-0706-20-3 and the contract of N. V. with ref. PRE2022-103001 of the project CEX2021-001214-S-20-6. This work constitutes part of the Materials Science PhD Program for F. B., N. V. and Z. T. at the Universitat Autonoma de Barcelona (UAB, Spain). This project was funded by the project PerMXSol (ref. PID2022-143344OB-I00), project TAMPOPO, (ref. PID2021-122349OAI00) and project SPOT-IT (ref. PCI2023-146003-2) funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, co-financed by the European Union. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. Thanks to Agencia de Gestio d’Ajuts Universitaris i de Recerca for Grant No. SGR 01617 and the Xarxa d’ R + D + I Energy for Society. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. We would like to acknowledge the team from Syre (syre.ai), especially Dr Brian Carlsen, for lending us their software prototype facilitating steps in the automatic processing of results from experiments. We would like to thank Juan A. Anta and colleagues for their help in setting up the drift diffusion simulations. We would like to thank Damaso Torres for his aid with graphic design, and Rafael León Lavin for modifications of the XRD holder and LITOS customized sample stages., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Roles of Ion Migration on Perovskite Solar Cell Operational Stability at Various Illumination Intensities

  • Tanko, Kenedy T.
  • Raga, Sonia R.
  • Vahedigharehchopogh, Naji
  • Baumann, Fanny
  • Karimipour, Masoud
  • Miranda Gamboa, Ramsés A.
  • Lira-Cantú, Mónica
This article also appears in: Indoor Photovoltaics, Monitoring the stability of perovskite solar cells (PSCs) under operational conditions is crucial for their development. This study integrates maximum power point (MPP) tracking with quasi in-situ electrochemical impedance spectroscopy at successive intervals to elucidate the temporal evolution of degradation mechanisms in PSCs. The gradual losses in photocurrent, photovoltage, and fill factor during MPP tracking were attributed to alterations in recombination processes, kinetic constants, shunt pathways, and series resistances, each manifesting at distinct phases of the PSC stability assessment. Notably, these variations correlated with a progressive increase in ionic density and mobility within the perovskite layer, as evidenced by a shift in the low-frequency ionic response and a 0.13 eV reduction in ionic activation energy. This apparent enhancement in ionic conductivity was more pronounced under illuminance levels below 1000Lx, predominantly affecting shunt resistance and leading to significant implications for indoor photovoltaic performance. The reported methodology offers a straightforward, non-destructive, and effective means to augment conventional PSC stability analyses across various lighting conditions., This work was supported by SOLAR-ERA.NET Cofund 2 by the Spanish Ministry of Science and Innovation (SMSI) and the AEI under the Project No. PCI2020−112185 and CDTI Project No. IDI-20210171. The ICN2 is supported by the Severo Ochoa Centers of Excellence program (Grant No. CEX2021-001214-S), both funded by MCIN/AEI/10.13039.501100011033, and by the CERCA, Generalitat de Catalunya. Thanks to Agencia de Gestio d’Ajuts Universitaris i de Recerca for the Grant No. SGR 01617 and the Xarxa d’ R + D + I Energy for Society. S.R.R. acknowledges the support from “la Caixa” Foundation (ID 100010434) with fellowship LCF/BQ/PI20/11760024 and Grant PID2021-122349OAI00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe.” This work constitutes part of the Materials Science Ph.D. Program for F.B., N.V. and K.T.T. at the Universitat Autonoma de Barcelona (UAB, Spain), and the authors acknowledge the SMSI for the predoctoral contract of F.B. with ref. PRE2020−092669 of the project SEV-2017-0706-20−3 and the contract of N.V. with ref. PRE2022-103001 of the project CEX2021-001214-S-20−6 and the contract to K.T. through the project PerMXSol (ref. PID2022-143344OB-I00). To the Spanish Ministry of Science, Innovation and Universities and AEI for the Research Network NextPVNet (Ref RED2024-154178-T). The authors thank Prof. Juan Antonio Anta and Prof. Wolfgang Tress for the fruitful discussions., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Monitoring the stability and degradation mechanisms of perovskite solar cells by in situ and operando characterization

  • Baumann, Fanny|||0000-0003-0203-5971
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Solar energy technologies are among the most promising renewable energy sources. The massive growth of global solar generating capacity to multi-terawatt scale is now a requirement to mitigate climate change. Perovskite solar cells (PSCs) are one of the most efficient and cost-effective photovoltaic (PV) technologies with efficiencies reaching the 26% mark. They have attracted substantial interest due to their light-harvesting capacity combined with a low cost of manufacturing. However, unsolved questions of perovskite stability are still a concern, challenging the potential of widespread commercialization. Thus, it is imperative to advance in the understanding of the degradation mechanism of PSCs under in situ and operando conditions where variable and unpredictable stressors intervene, in parallel or sequentially, on the device stability. This review aims to debate the advantages behind in situ and operando characterization to complement stability-testing of PV parameters in the strive to achieve competitive stability and reproducibility in PSCs. We consider the impact of applying single and multi-stressors under constant monitoring of alterations observed in PSC components or complete devices. We outline key future research directions to achieve the long-term stability necessary for the successful commercialization of this promising PV technology.