Pasar al contenido principal

HACIA LA PROXIMA GENERACION DE ALMACENAMIENTO DE ENERGIA TERMOQUIMICA PARA UNA EDIFICACION SOSTENIBLE: INTEGRACION DE MATERIALES COMPUESTOS Y REACTORES DE BAJA TEMPERATURA

PID2024-159711OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Estimation of solar absorptivity through color quantification for CSP solid particles

  • Cerutti-Cristaldo, Leonel Mario
  • Flores-Ríos, Paula María
  • Díaz-Heras, Minerva
  • Hernández-López, Leonor
  • Almendros-Ibáñez, José Antonio
This study evaluates cost-effective colorimetric alternatives to broad-spectrum spectrophotometry for characterizing CSP solar absorptivity. Using a visible-range spectrometer, three indicators were tested: the visible solar absorptivity (𝛼𝑉𝐼𝑆), lightness (L), and distance to the ideal black point (Δ𝐶). Results for various achromatic materials showed high reliability, with 𝛼𝑉𝐼𝑆 yielding 𝑅2=0.985. Colorimetric parameters performed similar, with a 𝑅2=0.981. While specular materials like SiC introduce geometric measurement errors, the findings confirm that CIELab quantification is a highly accurate, high-throughput screening tool for neutral-colored CSP materials., This work was partially funded by the project PID2024-159711OB-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain, grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain and CIPROM/ 2023/44 funded by Generalitat Valenciana.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Thermal performance characterisation of a bulk PCM tank for cold thermal energy storage

  • Alfaro-López, Miguel Á.
  • Belmonte, Juan F.
  • Almendros-Ibáñez, José A.
The projected growth in building cooling demand and its impact on peak electricity demand has highlighted the need for advanced energy management strategies. Thermal energy storage offers a promising approach through load shifting, while Phase Change Materials (PCM) are attractive due to their high energy density. This study presents preliminary experimental results on the characterisation of a bulk PCM tank for cold storage containing 322 kg of the commercial inorganic PCM SP12SK. Tank performance was evaluated in terms of temperature distribution and stored energy capacity through solidification and melting tests at three inlet temperature differences respect melting point (T = 4, 6 and 8ºC). The results show that nearly 90% of the theoretical storage capacity is reached, with stored and released energies between 9.3 and 14.4 kWh, confirming the strong potential of bulk inorganic PCM systems for cold storage., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain. This work has been carried out as part of the predoctoral contract 2024-UNIVERS-12844 at the University of Castilla-La Mancha (UCLM), funded by the European Union through the European Social Fund Plus (FSE+).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

A stochastic thermo-economic analysis of thermal energy storage for cooling and heating load shifting in residential buildings in Spain

  • Alfaro-López, Miguel Á.
  • Ramírez, Francisco J.
  • Belmonte, Juan F.
  • Almendros-Ibáñez, José A.
Residential electricity demand and peak loads are expected to increase, highlighting the need for advanced demand-side management strategies. Thermal energy storage enables load shifting to off-peak periods and may reduce operating costs. This study presents a stochastic thermo-economic assessment of integrating a water storage tank into the heating and cooling system of a high-rise residential building in two Spanish climates. TRNSYS simulations were combined with deterministic and stochastic economic analyses, using Monte Carlo simulations. TES achieved cooling electricity savings of up to 13%, although annual electricity consumption increased by around 10% due to storage heat losses. Despite this, operating costs were reduced by up to 21%, with slightly better economic indicators in the colder climates. However, the moderate profitability suggests that further optimisation is required to enhance overall economic feasibility., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain. This work has been carried out as part of the predoctoral contract 2024-UNIVERS-12844 at the University of Castilla-La Mancha (UCLM), funded by the European Union through the European Social Fund Plus (FSE+).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A stochastic thermo-economic analysis of thermal energy storage for cooling and heating load shifting in residential buildings in Spain

  • Alfaro-López, Miguel Á.
  • Ramírez, Francisco J.
  • Belmonte, Juan F.
  • Almendros-Ibáñez, José A.
Residential electricity demand and peak loads are expected to increase, highlighting the need for advanced demand-side management strategies. Thermal energy storage enables load shifting to off-peak periods and may reduce operating costs. This study presents a stochastic thermo-economic assessment of integrating a water storage tank into the heating and cooling system of a high-rise residential building in two Spanish climates. TRNSYS simulations were combined with deterministic and stochastic economic analyses, using Monte Carlo simulations. TES achieved cooling electricity savings of up to 13%, although annual electricity consumption increased by around 10% due to storage heat losses. Despite this, operating costs were reduced by up to 21%, with slightly better economic indicators in the colder climates. However, the moderate profitability suggests that further optimisation is required to enhance overall economic feasibility., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain. This work has been carried out as part of the predoctoral contract 2024-UNIVERS-12844 at the University of Castilla-La Mancha (UCLM), funded by the European Union through the European Social Fund Plus (FSE+).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Thermal performance characterisation of a bulk PCM tank for cold thermal energy storage

  • Alfaro-López, Miguel Á.
  • Belmonte, Juan F.
  • Almendros-Ibáñez, José A.
The projected growth in building cooling demand and its impact on peak electricity demand has highlighted the need for advanced energy management strategies. Thermal energy storage offers a promising approach through load shifting, while Phase Change Materials (PCM) are attractive due to their high energy density. This study presents preliminary experimental results on the characterisation of a bulk PCM tank for cold storage containing 322 kg of the commercial inorganic PCM SP12SK. Tank performance was evaluated in terms of temperature distribution and stored energy capacity through solidification and melting tests at three inlet temperature differences respect melting point (T = 4, 6 and 8ºC). The results show that nearly 90% of the theoretical storage capacity is reached, with stored and released energies between 9.3 and 14.4 kWh, confirming the strong potential of bulk inorganic PCM systems for cold storage., This work was partially funded by the project PID2024-159711OB-I00, TED2021-131046B-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain and grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain. This work has been carried out as part of the predoctoral contract 2024-UNIVERS-12844 at the University of Castilla-La Mancha (UCLM), funded by the European Union through the European Social Fund Plus (FSE+).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estimation of solar absorptivity through color quantification for CSP solid particles

  • Cerutti-Cristaldo, Leonel Mario
  • Flores-Ríos, Paula María
  • Díaz-Heras, Minerva
  • Hernández-López, Leonor
  • Almendros-Ibáñez, José Antonio
This study evaluates cost-effective colorimetric alternatives to broad-spectrum spectrophotometry for characterizing CSP solar absorptivity. Using a visible-range spectrometer, three indicators were tested: the visible solar absorptivity (𝛼𝑉𝐼𝑆), lightness (L), and distance to the ideal black point (Δ𝐶). Results for various achromatic materials showed high reliability, with 𝛼𝑉𝐼𝑆 yielding 𝑅2=0.985. Colorimetric parameters performed similar, with a 𝑅2=0.981. While specular materials like SiC introduce geometric measurement errors, the findings confirm that CIELab quantification is a highly accurate, high-throughput screening tool for neutral-colored CSP materials., This work was partially funded by the project PID2024-159711OB-I00 and RED2024-153629-T, by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/5011000 11033/, by European Regional Development Fund ‘‘A way of making Europe’’, by European Union NextGenerationEU/PRTR, grant SBPLY/24/180225/000071, funded by the Regional Government of Castilla-La Mancha, Spain, grant 2025-GRIN-38585, funded the University of Castilla-La Mancha, Spain and CIPROM/ 2023/44 funded by Generalitat Valenciana.