Pasar al contenido principal

NANOFLUIDOS TERMOREGULADORES PARA TECNOLOGIAS AVANZADAS CON EXIGENTE DEMANDA ENERGETICA

PID2021-123625OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Scale-up of Nanoencapsulated Phase Change Material Slurry

  • López-Pedrajas, Daniel
  • Rodríguez, Juan F.
  • Carmona, M.
  • Borreguero, Ana M.
The scale-up of the nanoencapsulated phase change material slurry (NPCS) production from lab scale (0.25 L reactor) to pilot plant scale (100 L reactor) has been carried out. The properties of the products obtained on these two scales remained almost unchanged. The long-term stability of the NPCS (pilot plant scale) was analyses by comparing the main properties after twenty months of storage time. The capsules maintained the nanometric size with a slight increase due to coalescence of them (dn0.5 = 75.0 nm just after preparation; dn0.5 = 87.3 nm at 20 months). The thermal storage capacity was also practically the same (𝛥𝐻𝐿= 46.1 J g-1 at the beginning; 𝛥𝐻𝐿=46.7 J g-1 at 20 months), as well as the colloidal stability (|ζ| changed from 54.2 to 47.9 mV after 20 months). Therefore, the scalability of the production process and the long-term stability of the NPCS is demonstrated, what is essential for being considered as an interesting solution to reduce fossil fuel dependence in the building sector., This work was supported by MCIU/AEI/10.13039/501100011033 due to the projects with references PID2021-123625OB-100 and RED2024-153629-T, the financial support from the European Regional Development Fund and the Regional Government of Castilla-La Mancha, project with reference SBPLY/21/180225/000082, and the fellowship for PhD studies (FPU16/02345) of Daniel Lopez-Pedrajas. Daniel Lopez-Pedrajas also must thanks to the European Union’s Next Generation funds, coordinated at the Spanish level by the Recovery, Transformation and Resilience Plan.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Catalyst effect on the ssPCMs production by Sol-gel Method

  • Elbasyouni, Dounia
  • Rodríguez, Juan F.
  • Carmona, Manuel
  • Borreguero, Ana M.
In this work, H2SO4 and HNO3 as strong inorganic acids and CH3COOH and CH3SO3H as organic acids were used for promoting the hydrolysis of the silica precursor tetraethylorthosilicate (TEOS) for the synthesis ssPCM by sol-gel method, using PEG1000 as PCM. All acids allowed to stabilize PEG1000 in the silica matrix. However, the process yield when using CH3COOH was low, causing a product leakage of 79.85% when subjecting it to 50ºC for 2 hours. CH3SO3H presented the lowest leakage and the best latent heat. Thus, ssPCMCH4O3S was selected as the best material for the long-term stability tests, subjecting it to 100 thermal cycles of heating and cooling, observing no significant differences., This work was supported by the Spanish Ministry of Science, Innovation and Universities due to the projects with references PID2021-123625OB-100 and MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), the financial support from the European Regional Development Fund and the Regional Government of Castilla-La Mancha, projects with references SBPLY/21/180225/000082 and SBPLY/24/180225/000092.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Catalyst effect on the ssPCMs production by Sol-gel Method

  • Elbasyouni, Dounia
  • Rodríguez, Juan F.
  • Carmona, Manuel
  • Borreguero, Ana M.
In this work, H2SO4 and HNO3 as strong inorganic acids and CH3COOH and CH3SO3H as organic acids were used for promoting the hydrolysis of the silica precursor tetraethylorthosilicate (TEOS) for the synthesis ssPCM by sol-gel method, using PEG1000 as PCM. All acids allowed to stabilize PEG1000 in the silica matrix. However, the process yield when using CH3COOH was low, causing a product leakage of 79.85% when subjecting it to 50ºC for 2 hours. CH3SO3H presented the lowest leakage and the best latent heat. Thus, ssPCMCH4O3S was selected as the best material for the long-term stability tests, subjecting it to 100 thermal cycles of heating and cooling, observing no significant differences., This work was supported by the Spanish Ministry of Science, Innovation and Universities due to the projects with references PID2021-123625OB-100 and MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), the financial support from the European Regional Development Fund and the Regional Government of Castilla-La Mancha, projects with references SBPLY/21/180225/000082 and SBPLY/24/180225/000092.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Scale-up of Nanoencapsulated Phase Change Material Slurry

  • López-Pedrajas, Daniel
  • Rodríguez, Juan F.
  • Carmona, M.
  • Borreguero, Ana M.
The scale-up of the nanoencapsulated phase change material slurry (NPCS) production from lab scale (0.25 L reactor) to pilot plant scale (100 L reactor) has been carried out. The properties of the products obtained on these two scales remained almost unchanged. The long-term stability of the NPCS (pilot plant scale) was analyses by comparing the main properties after twenty months of storage time. The capsules maintained the nanometric size with a slight increase due to coalescence of them (dn0.5 = 75.0 nm just after preparation; dn0.5 = 87.3 nm at 20 months). The thermal storage capacity was also practically the same (𝛥𝐻𝐿= 46.1 J g-1 at the beginning; 𝛥𝐻𝐿=46.7 J g-1 at 20 months), as well as the colloidal stability (|ζ| changed from 54.2 to 47.9 mV after 20 months). Therefore, the scalability of the production process and the long-term stability of the NPCS is demonstrated, what is essential for being considered as an interesting solution to reduce fossil fuel dependence in the building sector., This work was supported by MCIU/AEI/10.13039/501100011033 due to the projects with references PID2021-123625OB-100 and RED2024-153629-T, the financial support from the European Regional Development Fund and the Regional Government of Castilla-La Mancha, project with reference SBPLY/21/180225/000082, and the fellowship for PhD studies (FPU16/02345) of Daniel Lopez-Pedrajas. Daniel Lopez-Pedrajas also must thanks to the European Union’s Next Generation funds, coordinated at the Spanish level by the Recovery, Transformation and Resilience Plan.