Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Solving Ceramic Tile Factory Production Programming by MAS

  • Argente, Estefanía|||0000-0002-5431-3868
  • Giret Boggino, Adriana Susana|||0000-0002-2311-0785
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Gómez-Gasquet, Pedro|||0000-0002-9184-6735
  • Julian, Vicente|||0000-0002-2743-6037
[EN] This paper presents a system architecture to manage the production programming in a Ceramic Tile factory. The proposed architecture is based on the multi-agent system paradigm since it provides a natural way to solve problems in manufacturing industry domains. The production programming problem is considered as one of the main critical issues in a Ceramic Tile Company because obtaining an agile and reactive production planning and scheduling system is essential in manufacturing. The paper describes the proposed agent organization and the different needed scenarios and interactions in detail., This work has been partially funded by Polytechnic University of Valencia under grant PII-UPV 5574. Financial support from Spanish government under grant FPU AP2001-1516 and TIC2003-07369-C02-01 is also gratefully acknowledge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

PSO Tuning of a Second Order Sliding Mode Controller to Adjust Active Standard Power Levels on a Single-Phase Voltage Source Inverter

  • Gonzales-Zurita, Oscar
  • Clairand, Jean-Michel
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] Electricity management in non-conventional energy systems requires advanced control algorithms to produce and distribute electricity efficiently. Various countries worldwide have promoted policies to manage electricity from power inverters under typical voltage, current, and power values. This paper proposes a DQ control for active power regulation on a single-phase voltage source inverter (SPVSI) using a Second Order Sliding Mode Control (SMC-2). The SMC-2 tunning is performed by a metaheuristics algorithm like the Particle Swarm Optimization (PSO) to adjust the SMC-2 parameters. PSO appropriately tuns the SMC-2 through MATLAB, where the results showed lower Integral of Absolute Error value (IAE) and Integral of Square Error value (ISE) as performance indexes., This paper belongs to the project IEA.JCG.20.01 from Universidad de las Americas-Ecuador
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

Robust Scan Matching Localization using Ultrasonic Range Finders

  • Burguera, Antoni
  • Oliver, Gabriel
  • Tardos, Juan D.
[eng] The work presented in this paper deals with scan matching localization using ultrasonic range sensors. Our contribution resides in the extension of ICP based algorithms to be used with ultrasonic sensor data. This extension consists of a pre-process step, where ultrasonic sensor readings are grouped to overcome their sparseness, and a post-process step, where the whole robot trajectory involved in the grouping process is corrected. Thanks to that a great improvement with respect to odometry is obtained. Experimental results show that even huge odometric errors are corrected with the presented method.
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

ATHRAIA: A hybrid control architecture for a world modeller robot

  • Burguera, Antoni
  • González, Yolanda
  • Oliver, Gabriel
[eng] Autonomous mobile vehicles need spatial information about the envoronment in order to effectively plan and execute navigation tasks. This paper present ATHRAIA, a control architecture able to safely guide a robot through an unknown environment while mapping it. ATHRAIA uses the map to correct the robot estimated position and to plan the mission execution. The system has been tested on a versatile simulation environment and now is being implemented on the real robot CABRIT.
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

A Robust System for Localization and Mapping While Navigating

  • Burguera, Antoni
  • González, Yolanda
  • Oliver, Gabriel
[eng] Autonomous mobile vehicles need spatial information about the environment in order to effectively plan and execute navigation tasks. This paper present a straightforward system that permits both incrementally robust map building and vehicle relocation simultaneously while navegating. The systen is able to build the local occupancy grid and to analyce it generating a hybrid topological-metric map in real time. The topological nodes, which symbolize landmarks of interest, are computed by means of computer vision techniques using the metric information obtained during navigation. The relocation process is based on the landmark identification and some pose uncertainty constraints.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Exploring an unknown environment with a mobile robot

  • Burguera Burguera, Antonio
  • González Cid, Yolanda
  • Oliver Codina, Gabriel
[eng] An autonomous mobile robot needs information of the environment and its own position in order to successfully navigate and execute useful missions. A robust system for detecting, identifying, analyzing and comparing environmental landmarks obtained from standard range sensors is presented in this paper. These landmarks are used to incrementally build a hybrid topological-metric map of the environment and to correct the robot position estimation. The object oriented control architecture which integrates this mapping and localization techniques is also described, as well as the experimental results obtained with a simulation environment and a real robot.
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

Achieving accurate mobile robot localization by combining topological maps and raw sonar readings

  • Burguera, Antoni
  • González, Yolanda
  • Oliver, Gabriel
[eng] This paper presents a mobile robot selflocalization system that takes advantage of both geometrically constrained and raw reading based methods using sonar. This system is structured in three layers. The lower layer operates at high frequency, providing the robot continuously an estimation of its position. This is accomplished by simply doing dead reckoning. The intermiediate layer operates at a lower frequency and uses the raw range information provided by sonar sensors to perform scan matching. Finally, the higher layer operates sporadically by exploiting the geometry of indoor environments through a topological map. Thanks to these three layers an accurate localization is achieved, as demonstrated by the experimental results.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Determinación del contenido y composición de la grasa intramuscular a partir de una biopsia en porcino

  • Bosch Puig, Lluís
  • Tor i Naudí, Marc
  • Villalba Mata, Daniel
  • Puigvert Colomer, Xavier
  • Estany Illa, Joan
Trabajo financiado por la CICYT (proyecto AGL-2001-0648).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Evaluación de un método de determinación in vivo del contenido y composición de la grasa intramuscular en porcino a partir de una biopsia

  • Bosch Puig, Lluís
  • Tor i Naudí, Marc
  • Villalba Mata, Daniel
  • Puigvert Colomer, Xavier
  • Reixach, Josep
  • Estany Illa, Josep
Trabajo financiado por el proyecto CICYT AGL2001-0648.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Diagenetic evolution of platform carbonates linked to the diapir growth (Central High Atlas, Morocco)

  • Baqués, Vinyet
  • Moragas, Mar
  • Traveset, Anna
  • Vergés Masip, Jaume
  • Martín-Martín, J. D.
  • Saura, Eduard
  • Messager, G.
  • Hunt, David W.
15th Bathurst Meeting of Carbonate Sedimentologists ,13 - 16 July 2015 / Edinburgh, UK, The diagenetic history of strata juxtaposed against diapirs can differ significantly to other basin strata. Key contributing factors are localised uplift, fracturing and brecciation associated with syn- and post-depositional diapiric movements and focused fluid flow along the diapirs flanks during burial. To better understand carbonate diagenesis in diapiric settings, we have studied Jurassic strata flanking the elongate Toumliline (8 km) and Tazoult (22 km) diapirs in the Central High Atlas, Morocco. Similar trends and diagenetic chronology are identified between the two diapirs. During the early growth of the diapir (stage 1), slightly evaporated marine waters circulated along the diapir walls, causing dolomitization of the lower flanking carbonate units. Further active growth of the diapir (stage 2), promoted exposure of the platform, meteoric karstification of the platform carbonates, and the deposition of down-flank syn-diapiric breccias. This is an important step that distinguishes this work from other studies. The continuation of the diapir growth (stage 3) then favoured interaction of the carbonates with mixing marine and meteoric waters, and relates to the dolomitization and calcite cementation of upper flanking carbonate units. After the fossilization of the diapir (stage 4), hydrothermal fluids ascended through dilatant fractures, producing a halo of calcite recrystallization and dolomite cement precipitation. Late karstification of the carbonate deposits are attributed to meteoric fluids circulated during the uplift related to the Tertiary compression (stage 5). The results show a clear influence of diapirism on diagenesis of the flanking carbonates in terms of both the processes and fluids involved. This link between diagenesis and diapirism is generally comparable to those recorded by other authors in La Popa Basin, the South Oman Salt Basin and offshore of Tunisia. This similarity points towards the role of some key fundamental processes., This study is funded by Statoil Research Centre, Bergen (Norway), by the Spanish Ministry of Education and Science (MEC) through the porcets Intramural Especial (CSIC 201330E030), Atiza (CGL2009-1355) and Tecla (CGL2001-26670), CSIC-FSE 2007-2013 JAE-Doc postdoctoral research contract (E.S.), as well as the Group of Sedimentary reserarch of the University of Barcelona (UB).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Multiple-length-scale small-angle X-ray scattering analysis on maghemite nanocomposites

  • Millán, A.
  • Urtizberea, A.
  • Silva, N. J. De Oliveira E
  • Boesecke, P.
  • Natividad, E.
  • Palacio, F.
  • Snoeck, E
  • Soriano, L.
  • Gutiérrez, A.
  • Quirós, C.
O2, repositorio institucional de la UOC
Publicación Contribución de congreso (ConferenceOutput)

PN to CSP Methodology: Improved Bounds

  • Riera Terrén, Daniel
  • Piera, Miquel Angel
  • Guasch, Antoni
Traditional production planning techniques are constrained by large numbers of decision variables, uncertainty in demand and time production, and non-deterministic system behaviour (intrinsic characteristics in manufacturing). This paper presents an improvement to a methodology in the area of Knowledge Based Systems (KBS) which generates automatically Constraint Satisfaction Problems (CSP), using Petri-nets (PN) to model the problem and Constraint Programming (CP) in the solution. The methodology combines the modelling power of PN to represent both manufacturing architecture and production logistics, together with the optimisation performance given by CP. While PN can represent a whole production system, CP is effective in solving large problems, especially in the area of planning. The improvement raises from the design of a more complete algorithm to calculate the transitions firings bounds, and hence to remove useless problem variables.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Evaluación de un método de determinación in vivo del contenido y composición de la grasa intramuscular en porcino a partir de una biopsia

  • Bosch Puig, Lluís
  • Tor i Naudí, Marc
  • Villalba Mata, Daniel
  • Puigvert Colomer, Xavier
  • Reixach, Josep
  • Estany Illa, Josep
Trabajo financiado por el proyecto CICYT AGL2001-0648.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Neutron cross-sections for advanced nuclear systems: the n_TOF project at CERN

  • Barbagallo, Massimo
  • Mastromarco, M.
  • Colonna, Nicola
  • Calviño Tavares, Francisco
  • Cortés Rossell, Guillem Pere
  • Riego Pérez, Albert
The study of neutron-induced reactions is of high relevance in a wide variety of fields, ranging from stellar nucleosynthesis and fundamental nuclear physics to applications of nuclear technology. In nuclear energy, high accuracy neutron data are needed for the development of Generation IV fast reactors and accelerator driven systems, these last aimed specifically at nuclear waste incineration, as well as for research on innovative fuel cycles. In this context, a high luminosity Neutron Time Of Flight facility, n_TOF, is operating at CERN since more than a decade, with the aim of providing new, high accuracy and high resolution neutron cross-sections. Thanks to the features of the neutron beam, a rich experimental program relevant to nuclear technology has been carried out so far. The program will be further expanded in the near future, thanks in particular to new highflux experimental area, now under construction., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Determinación del contenido y composición de la grasa intramuscular a partir de una biopsia en porcino

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Astrophysics at n-TOF facility

  • Tagliente, G.
  • Colonna, Nicola
  • Marrone, S.
  • Calviño Tavares, Francisco
  • Cortés Rossell, Guillem Pere
  • Poch Parés, Agustí
  • Pretel Sánchez, Carme
The neutron time of flight (n_TOF) facility at CERN is a neutron spallation source, its white neutron energy spectrum ranges from thermal to several GeV, covering the full energy range of interest for nuclear astrophysics, in particular for measurements of the neutron capture cross section required in s-process nucleosynthesis. This contribution gives an overview on the astrophysical program made at n_TOF facility, the results and the implications will be reported., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Measurements of the 90,91,92,93,94,96zr (n, gamma) cross-sections at n_tof

  • Milazzo, P.M.
  • Tagliente, G.
  • Abbondanno, U.
  • Calviño Tavares, Francisco
  • Cortés Rossell, Guillem Pere
  • Poch Parés, Agustí
  • Pretel Sánchez, Carme
Neutron capture cross sections for zirconium isotopes have important implications in the field of nuclear astrophysics as well as in the nuclear technology. In particular they play a key role for the determination of the neutron density in the He burning zone of the Red Giant stars. Zirconium is also largely used as structural materials of traditional and advanced nuclear reactors. Neutron capture cross sections of the 90,91,92,93,94,96Zr have been measured at the spallation neutron facility n_TOF at CERN. The innovative features of the neutron beam, in particular its high instantaneous flux, the high energy resolution and low background, together with improvements of the neutron sensitivity of the capture detectors make this facility unique for neutron-induced reaction cross section measurements with much improved accuracy., Postprint (published version)
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Individual's problem solving: adaptation vs. innovation. An study in UPM

  • Martín Rubio, Irene|||0000-0002-9180-8165
  • Andina de la Fuente, Diego|||0000-0001-7036-2646
  • Méndez Lázaro, Ana María|||0000-0001-9642-0875
  • Gascó Guerrero, Gabriel|||0000-0001-6751-2287
  • Gómez-Limón, Dulce
  • Medina, Silvia
  • Fabregat Sisto, Joaquin Angel
  • Antón Corrales, José Manuel
  • Grau Olive, Juan Bautista|||0000-0002-0880-4201
  • Moratiel Yugueros, Ruben|||0000-0002-9920-3937
  • Saa Requejo, Antonio|||0000-0002-0329-0934
  • Tarquis Alfonso, Ana María|||0000-0003-2336-5371
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Ontology-based integration of biomedical databases

  • Pérez del Rey, David|||0000-0002-9021-2597
  • Maojo García, Víctor Manuel|||0000-0001-5103-4292
  • García Remesal, Miguel|||0000-0002-5948-8691
  • Billhardt, Holger
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Uso de tecnologías de agentes para la integración de bases de datos clínicas y genéticas

  • Bahillo Santos, Ricardo
  • García Remesal, Miguel|||0000-0002-5948-8691
  • Pérez del Rey, David|||0000-0002-9021-2597
  • Alonso Calvo, Raúl|||0000-0002-2803-0215
  • Romero Moraleda, Blanca
  • LLorente Rodríguez, Juan Carlos
  • Martínez Risque, Gustavo
  • Barbado Macarrón, Vanessa
  • Moral Rodríguez, César
  • Martínez Agra, Alejandra
  • Martín-Sánchez, Fernando
  • Sousa, A.
  • Oliveira, Ilidio Castro
  • Maojo García, Víctor Manuel|||0000-0001-5103-4292
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Biomedical ontologies in post-genomic information systems

  • Pérez del Rey, David|||0000-0002-9021-2597
  • Maojo García, Víctor Manuel|||0000-0001-5103-4292
  • García Remesal, Miguel|||0000-0002-5948-8691
  • Alonso Calvo, Raúl|||0000-0002-2803-0215
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

A virtual approach to integrating biomedical databases and terminologies

  • Maojo García, Víctor Manuel|||0000-0001-5103-4292
  • García Remesal, Miguel|||0000-0002-5948-8691
  • Billhardt, Holger
  • Crespo del Arco, Jose|||0000-0002-0772-5421
  • Martín-Sánchez, Fernando
  • Pereira, Antonio Sousa
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Biomedical information integration for health applications with grid: a requirements perspective

  • Oliveira, Ilidio Castro
  • Oliveira, José Luís
  • Pereira, Antonio Sousa
  • Martín-Sánchez, Fernando
  • Maojo García, Víctor Manuel|||0000-0001-5103-4292
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

The BIOINFOMED study: towards the synergy between research in medical informatics and bioinformatics

  • Martín-Sánchez, Fernando
  • Maojo García, Víctor Manuel|||0000-0001-5103-4292
  • Vicente-Martín, F.
  • Hermosilla-Gimeno, Isabel
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

INFOGENMED: Integrating heterogeneous medical and genetic databases and terminologies

  • García Remesal, Miguel|||0000-0002-5948-8691
  • Crespo del Arco, Jose|||0000-0002-0772-5421
  • Silva Vazquez, Andrés|||0000-0002-7273-0526
  • Billhardt, Holger
  • Martín-Sánchez, Fernando
  • Rodríguez Pedrosa, Juan
  • Martín, V.
  • Pereira, Antonio Sousa
  • Babic, Aleksandar|||0000-0001-7677-2451
  • Maojo García, Víctor Manuel|||0000-0001-5103-4292
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Strategies to reduce design time in multimodal/multilingual dialog applications

  • D'Haro Enríquez, Luis Fernando|||0000-0002-3411-7384
  • Córdoba Herralde, Ricardo de|||0000-0002-7136-9636
  • San Segundo Hernández, Rubén|||0000-0001-9659-5464
  • Montero Martínez, Juan Manuel|||0000-0002-7908-5400
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Pardo Muñoz, José Manuel|||0000-0002-1009-590X
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Nanosensor for detection of glucose

  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
A novel fibre-optic sensor sensitive to glucose has been designed based on electrostatic self-assembly method. The polycation of the structure is a mixture of poly(allylamine hydrochloride) (PAH) and Prussian Blue, whereas the polyanion is well-known enzyme glucose oxidase (GOx). The range of glucose concentration that can be measured is submilimolar and is located between 0.1 and 2 mM. Measures are based on a new detection scheme based on the slope of the change of signal produced by injection of glucose, yielding to a linear response. The sensor responses in a PH range between 4 and 7.4, which includes the physiological PH of blood. Some rules for estimation of the refractive index of the material deposited and the thickness of bilayers are also given., This work was supported by Spanish Ministerio de Ciencia y Tecnologia and FEDER Research Grants CICYT-TIC 2003-00909 and CICYT-TIC 2001-0877-C02-02; Gobierno de Navarra and FPU MECD Grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

High-resolution absolute-distance measurements using multiple-tunable fiber Bragg gratings

  • Luquin Rodríguez, Elena
  • Frazão, Orlando
  • Ferreira, Luis Alberto
  • Araújo, Francisco Moita
  • López-Amo Sáinz, Manuel
  • Santos, José Luís
We present and demonstrate a high-resolution absolute-distance measurement system based on multiple-wavelength interferometry. The information on a cavity length is obtained by sampling a fringe of its spectral response at different wavelengths. This is achieved by simultaneously tuning multiple fiber Bragg gratings. For a two wavelength system, an unambiguous measurement range of 262 tm was obtained with a resolution of 14.3 nm., Financial support from the Spanish Comisión Interministerial de Ciencia y TecnologIa within proyects TIC2001-0877- C02 and TIC2003-00909 is acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Molecules assembly toward fiber optic nanosensor development

  • Matías Maestro, Ignacio
  • Del Villar, Ignacio
  • Arregui San Martín, Francisco Javier
  • Claus, Richard O.
Different optical fiber sensor configurations based on a LBL nano-technique will be presented. With this technique it is possible to fabricate different structures such as nano Fabry Perot interferometers, optical fiber gratings and any other one dimensional photonic bandgap structures that may be used either for sensing applications or for the implementation of other fiber optic devices. Some of the proposed fiber optic sensors have been fabricated and their main characteristics are their negligible temperature dependence, their fast response, the possibility of using low cost LEDs instead of lasers or even the possibility of operating at different wavelengths., This work was supported by Spanish Ministerio de Ciencia y Tecnologia and FEDER Research Grants CICYT-TIC 2003-00909 and CICYT-TIC 2001-0877-C02-02; Gobierno de Navarra and FPU MECD Grant.