Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 511
Encontrada(s) 6 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

A stochastic height-diameter model for maritime pine ecoregions in Galicia (northwestern Spain)

  • Castedo Dorado, Fernando
  • Barrio Anta, Marcos
  • Parresol, Bernard R.
  • Álvarez González, Juan Gabriel
[EN] A stochastic height-diameter model was developed for maritime pine (Pinus pinaster Ait.) in Galicia (northwestern Spain). Four well-known growth functions were initially considered in this work, however, only Schnute's function performed adequately. A set of 20 695 pairs of height-diameter measures, collected in thinned and unthinned pure and even-aged stands, were used to fit the model. These stands were located throughout Galicia Autonomous Region covering a wide range of forest stands and site conditions. Since unequal error variance occurs, the generalized non-linear least squares method was used to take into account the error structure. Different weighting factors were employed to remove the heterogeneous variance of the errors. Because the local model (including only tree dimensions as explanatory variables) did not provide adequate results, stand variables were tested and incorporated into the height-diameter model. Ecoregion differences in the height-diameter relationship were analysed using the non-linear extra sum of squares method and the Lakkis-Jones test. Both tests showed that model parameters were significantly different between the two ecoregions normally defined for this species: coast and interior. The effect of thinning was examined; however, no benefits were obtained by introducing an additional thinning response variable in the prediction model. Finally, since trees with the same diameter usually do not have the same height, even within the same stand, a stochastic component was added to the deterministic height function. This approach mimics the natural variability of heights and therefore provides more realistic height predictions, SI, This study was financed by the Comisión Interministerial de Ciencia y Tecnología (CICYT), project No AGL2001-3871-C02-01
Docta Complutense
Publicación Artículo científico (JournalArticle)

Overshooting the critical threshold for the Greenland ice sheet

  • Bochow, Nils
  • Poltronieri, Anna
  • Robinson, Alexander James
  • Montoya Redondo, María Luisa
  • Rypdal, Martin
  • Boers, Niklas
Melting of the Greenland ice sheet (GrIS) in response to anthropogenic global warming poses a severe threat in terms of global sea-level rise (SLR)1. Modelling and palaeoclimate evidence suggest that rapidly increasing temperatures in the Arctic can trigger positive feedback mechanisms for the GrIS, leading to self-sustained melting2-4, and the GrIS has been shown to permit several stable states5. Critical transitions are expected when the global mean temperature (GMT) crosses specific thresholds, with substantial hysteresis between the stable states6. Here we use two independent ice-sheet models to investigate the impact of different overshoot scenarios with varying peak and convergence temperatures for a broad range of warming and subsequent cooling rates. Our results show that the maximum GMT and the time span of overshooting given GMT targets are critical in determining GrIS stability. We find a threshold GMT between 1.7 degrees C and 2.3 C-degrees above preindustrial levels for an abrupt ice-sheet loss. GrIS loss can be substantially mitigated, even for maximum GMTs of 6 C-degrees or more above preindustrial levels, if the GMT is subsequently reduced to less than 1.5 C-degrees above preindustrial levels within a few centuries. However, our results also show that even temporarily overshooting the temperature threshold, without a transition to a new ice-sheet state, still leads to a peak in SLR of up to several metres.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Nutrients return from leaves and litterfall in a mediterranean cork oak (Quercus suber L.) forest in southwestern Spain

  • Andivia Muñoz, Enrique
  • Fernández, Manuel
  • Vázquez Piqué, Javier
  • González Pérez, Aranzazu
  • Tapias, Raúl
The knowledge of the cycle of nutrients is fundamental for the correct comprehension of the tree–soil relationship and for an adequate forest management. In order to analyse the nutrients return from leaves and litterfall in a Mediterranean cork oak forest in southwestern Spain, 12 trees were randomly selected and litterfall collected for 2 years. Samples were taken monthly and separated in different fractions (leaves, twigs, catkins, acorns and miscellaneous), then leaves nutrients were analyzed. Simultaneously, we analyzed the nutrient content of living leaves from the same trees in each season during 1 year. The analyzed nutrients were C, N, P, K, Ca, Mg, Fe, Mn, S, Cu, Zn and Mo. Annual patterns of each nutrient in fallen leaves were characterized and compared with seasonal values of these nutrients in living leaves. Leaves fall has two annual maximum, first and most important in spring around April coinciding with renewal of foliar cover and second around October. Main concentration patterns of N, P and K are related with phenological patterns, in consequence minimum concentration in leaves fall were obtained in periods of growing and maximum litterfall. Concentrations of Ca, Fe and Mn increase with the age of the leaves and maximum concentrations were obtained before periods of maximum litterfall while concentrations of Cu, Mo and Mg stay stable. Seasonal analysis of nutrients in living leaves collected from the same trees in four different periods of the year allowed to corroborate the patterns of leaves fall and the probable osmotic function of K.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Glycosylated human oxyhaemoglobin activates nuclear factor-jB and activator protein-1 in cultured human aortic smooth muscle

  • Peiró Vallejo, Concepción
  • Matesanz, Nuria
  • Nevado, Julián
  • Lafuente, Nuria
  • Cercas, Elena
  • Azcutia Criado, Verónica
  • Vallejo, Susana
  • Rodríguez-Mañas, Leocadio
  • Sánchez-Ferrer, Carlos F.
1 Diabetic vessels undergo structural changes that are linked to a high incidence of cardiovascular diseases. Reactive oxygen species (ROS) mediate cell signalling in the vasculature, where they can promote cell growth and activate redox-regulated transcription factors, like activator protein-1 (AP-1) or nuclear factor-kB (NF-kB), which are involved in remodelling and inflammation processes. Amadori adducts, formed through nonenzymatic glycosylation, can contribute to ROS formation in diabetes. 2 In this study, we analysed whether Amadori-modified human oxyhaemoglobin, glycosylated at either normal (N-Hb) or elevated (E-Hb) levels, can induce cell growth and activate AP-1 and NF-kB in cultured human aortic smooth muscle cells (HASMC). 3 E-Hb (1 nM–1 mM), but not N-Hb, promoted a concentration-dependent increase in cell size from nanomolar concentrations, although it failed to stimulate HASMC proliferation. At 10 nM, E-Hb stimulated both AP-1 and NF-kB activity, as assessed by transient transfection, electromobility shift assays or immunofluorescence staining. The effects of E-Hb resembled those of the proinflammatory cytokine tumour necrosis factor-a (TNF-a). E-Hb enhanced intracellular superoxide anions content and its effects on HASMC were abolished by different ROS scavengers. 4 In conclusion, E-Hb stimulates growth and activates AP-1 and NF-kB in human vascular smooth muscle by redox-sensitive pathways, thus suggesting a possible direct role for Amadori adducts in diabetic vasculopathy.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

El descuento social

  • Souto Nieves, Guadalupe|||0000-0002-8056-9330
En este trabajo se presenta una revisión de las principales teorias sobre el descuento social, la preferencia temporal y el coste de oportunidad del capital, cuyos resultados empíricos suelen arrojar diferencias significativas. Sin embargo, se muestra que no se trata de dos enfoques alternativos sino complementarios, pues la forma correcta de actualizar los flujos de un proyecto social consiste en combinarlos. Para ello es necesario disponer de estimaciones de la tasa de preferencia temporal, del coste de oportunidad del capital, del precio sombra del capital y de los efectos que el proyecto provoca sobre el consumo y la inversión privados. El procedimiento correcto para llevar a cabo dichas estimaciones también es objeto de análisis., In this paper the two main theories on social discounting, the time preference and the opportunity cost ofcapital, are reviewed. Although their empirical results are often quite different, they are not altemative but complementary approaches. The correct way to discount the impacts ofa social project is a combination ofthe social time preference rate and the social opportunity cost ofcapital. This needs also the val u e ofthe shadow price ofcapital and the estimation ofthe effects ofthe social project on private consumption and investment. The method for obtaining these estimations is also analyzed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Three-dimensional dental topography of fossil suids and paleoenvironmental reconstruction of earliest Vallesian (Late Miocene) sites from the Vallès-Penedès Basin (NE Iberian Peninsula)

  • McKenzie, Sharrah|||0000-0002-8259-3756
The earliest Vallesian (∼11.2 Ma) sites of Castell de Barberà (CB) and Creu de Conill 20 (CCN20), in the Vallès-Penedès Basin (NE Iberian Peninsula), are similarly well sampled but display differences in faunal composition that hint at paleoenvironmental differences. Most importantly, CB records one of the few co-occurrences of hominoids and pliopithecoids in the Miocene of Europe, while primates are seemingly absent from CCN20. Differences are also reflected in the more diverse suid assemblage from CB. To ascertain the paleoecological basis for such differences, here we investigate the diets of the suids from these sites-the suine Propotamochoerus palaeochoerus, the tetraconodontines Parachleustochoerus valentini and Versoporcus steinheimensis, and the listriodontine Listriodon splendens. We use 3D dental topography to infer paleodiet and provide further insight into the local paleoenvironmental differences between these sites. We measure four variables-orientation patch count, relief index, angularity, and mean surface slope-and distinguish herbivorous from omnivorous taxa, with the former categorized as browsers, mixed feeders, and grazers. The analyzed suids are similar in terms of angularity but differ in mean surface slope, orientation patch count and relief index. A canonical variate analysis classifies the CB and CCN20 suids as herbivorous (mixed feeders), except for P. palaeochoerus from CCN20, which displays greater similarities to omnivores (higher surface complexity), suggesting more varied diets in the latter locality. We conclude that, despite being roughly coeval and geographically close (∼10 km), these two sites record different local paleoenvironments-with CB representing a very humid and densely forested habitat, and CCN20 recording a more open, arid, and seasonal environment. This confirms previous inferences based on faunal composition and would explain the absense of primates from CCN20. Our study further highlights the relevance of local paleoenvironments for understanding differences in faunal composition among past communities from the same area.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reseñas

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phylogenetic signal in primate tooth enamel proteins and its relevance for paleoproteomics

  • Fong-Zazueta, Ricardo|||0000-0003-1212-7837
  • Krueger, Johanna|||0000-0002-2685-718X
  • Alba, David M.|||0000-0002-8886-5580
  • Aymerich Núñez de Arenas, Xènia|||0000-0002-5848-1068
  • Beck, Robin|||0000-0002-7050-7072
  • Cappellini, Enrico|||0000-0001-7885-7811
  • Carrillo-Martin, Guillermo
  • Cirilli, Omar|||0000-0001-8478-1462
  • Clark, Nathan|||0000-0003-0006-8374
  • Cornejo, Omar E.|||0000-0003-4076-4227
  • Farh, Kyle Kai-How|||0000-0001-6947-8537
  • Ferrández-Peral, Luis|||0000-0003-0338-0603
  • Juan, David|||0000-0003-1912-9667
  • Kelley, Joanna|||0000-0002-7731-605X
  • Kuderna, Lukas F. K.|||0000-0002-9992-9295
  • Little, Jordan|||0000-0002-8590-9357
  • Orkin, Joseph|||0000-0001-6922-2072
  • Paterson, Ryan S.|||0000-0003-0260-9947
  • Pawar, Harvinder|||0000-0002-3852-4999
  • Marquès i Bonet, Tomàs|||0000-0002-5597-3075
  • Lizano, Esther|||0000-0003-3304-9807
Ancient tooth enamel, and to some extent dentin and bone, contain characteristic peptides that persist for long periods of time. In particular, peptides from the enamel proteome (enamelome) have been used to reconstruct the phylogenetic relationships of fossil taxa. However, the enamelome is based on only about 10 genes, whose protein products undergo fragmentation in vivo and post mortem. This raises the question as to whether the enamelome alone provides enough information for reliable phylogenetic inference. We address these considerations on a selection of enamel-associated proteins that has been computationally predicted from genomic data from 232 primate species. We created multiple sequence alignments for each protein and estimated the evolutionary rate for each site. We examined which sites overlap with the parts of the protein sequences that are typically isolated from fossils. Based on this, we simulated ancient data with different degrees of sequence fragmentation, followed by phylogenetic analysis. We compared these trees to a reference species tree. Up to a degree of fragmentation that is similar to that of fossil samples from 1-2 million years ago, the phylogenetic placements of most nodes at family level are consistent with the reference species tree. We tested phylogenetic analysis on combinations of different enamel proteins and found that the composition of the proteome can influence deep splits in the phylogeny. With our methods, we provide guidance for researchers on how to evaluate the potential of paleoproteomics for phylogenetic studies before sampling valuable ancient specimens.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Evaluación de multiplicadores contables en el marco de una matriz de contabilidad social regional

  • Cardenete Flores, Manuel Alejandro|||0000-0001-7495-7479
  • Sancho Pifarré, Ferran|||0000-0002-6200-116X
El objetivo de este trabajo es doble. En primer lugar presentamos una matriz de contabilidad social de le economía andaluza para el año 1995, siguiendo la tendencia que se ha seguido en los últimos años de regionalizar este tipo de base de datos. Utilizando los datos disponibles de Contabilidad Regional, otras fuentes estadísticas a nivel nacional y la Tabla Input-Output de Andalucía para el año 1995, se reordenan y presentan en formato tabular los flujos entre los distintos agentes de la economía. En segundo lugar, y usando la base de datos compilada, realizamos una descomposición de los multiplicadores contables en sus tres efectos ("directos, indirectos e inducidos"), lo que nos permite analizar las relaciones más importantes entre los diferentes sectores productivos de la economía andaluza y comprobar las versatilidad de la metodología de análisis lineal en el tratamiento de este tipo de base de datos., The main goal of this paper is to present a recent Social Accounting Matrix for the region of Andalusia (SAMAND95). Using a variety of available data, such as the Regional Income and Product Accounts, the 1995 Input-Output Table for Andalusia, as well as some national level data, we have constructed a square SAM that reflects all flows and interactions for the base year. With the database we have performed a modeling exercise that allows us to obtain accounting multipliers, and their decomposition into direct, indirect, and induced effects, that show some of the structural relationship among productive sectors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Where's dinner? Variation in carnivoran distributional responses to the mid-Vallesian faunal turnover

  • Madern, Anneke|||0000-0002-1755-0717
  • Braumuller|||0000-0003-3960-2933
  • Mavikurt, Aslı Ceren|||0000-0002-1548-9406
  • Mayda, Serdar|||0000-0001-5432-3559
  • Bergwerff, Leonie
  • Janssen, Naomi
  • Cantalapiedra, Juan L.|||0000-0003-0913-7735
  • Robles Gimenez, Josep Maria|||0000-0002-5410-3529
  • Casanovas i Vilar, Isaac|||0000-0001-7092-9622
  • van Welzen, Peter|||0000-0002-5072-431X
  • Van den Hoek Ostende, Lars W.|||0000-0003-3114-0121
The Catalan locality of Can Llobateres 1 (early Vallesian, MN9) shows a remarkably rich diversity just prior to the mid-Vallesian crisis, including 23 species of Carnivora. Similarity maps using the Raup-Crick index and covering the Middle to Late Miocene (16-5.3 Ma) show that the origin of this carnivoran chronofauna lies to the north of the Iberian Peninsula, gradually making its way south. The chronofauna built up through migrations during the Aragonian, but shows a major influx during the early Vallesian, leading to a biodiversity hotspot. At the end of MN9, the mid-Vallesian turnover, the chronofauna collapses. This is mainly because of the extinction of parts of the fauna, and the retraction of some species to the north, disappearing from Spain. Thus, the rich fauna is an amalgamation of persisting older elements, northern elements having a brief temporary presence and new elements coming in. All these were supported by the unique rich ecosystem of the Vallès-Penedès Basin during the early Vallesian.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cubic spline population density functions and satellite city delimitation, the case of Barcelona

  • Muñiz, Ivan|||0000-0001-5055-3429
  • Galindo, Anna
  • García López, Miquel-Àngel|||0000-0002-0515-2922
The presence of satellite cities within large metropolitan areas cannot be captured by an exponential function. Cubic spline functions seem more appropriate to depict the polycentric pattern of modern urban systems. Using data from the Barcelona Metropolitan Region, two possible population satellite city delimitation procedures using cubic spline density functions are discussed: one, taking an estimated derivative equal to zero; the other, a density gradient equal to zero. It is argued that a delimitation strategy based on derivatives is more appropriate than one based on gradients because the estimated density can be negative in sections with very low densities and few observations, leading to sudden changes in estimated gradients. It is also argued that delimiting satellite cities using a second derivative with a zero value permits the capture of a more restricted area than using a first derivative zero. This methodology can also be used for intermediate ring delimitation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Incremental Gaussian Discriminant Analysis based on Graybill and Deal weighted combination of estimators for brain tumour diagnosis

  • Tortajada, Salvador
  • Fuster-Garcia, Elies|||0000-0002-0716-8960
  • Vicente, Javier
  • Wesseling, Pieter
  • Howe, Franklyn A.
  • Julià Sapé, Ma. Margarita|||0000-0002-3316-9027
  • Candiota Silveira, Ana Paula|||0000-0002-1523-6505
  • Monleon, Daniel|||0000-0002-4803-1573
  • Moreno Torres, Angel
  • Pujol Nuez, Jesús|||0000-0002-9946-4547
  • Griffiths, John R.
  • Wright, Alan
  • Peet, Andrew C.
  • Martínez Bisbal, M. Carmen
  • Celda Muñoz, Bernardo
  • Arús i Caraltó, Carles|||0000-0003-2510-2671
  • Robles, Montserrat
  • García Gómez, Juan Miguel|||0000-0002-3851-1557
In the last decade, machine learning (ML) techniques have been used for developing classifiers for automatic brain tumour diagnosis. However, the development of these ML models rely on a unique training set and learning stops once this set has been processed. Training these classifiers requires a representative amount of data, but the gathering, preprocess, and validation of samples is expensive and time-consuming. Therefore, for a classical, non-incremental approach to ML, it is necessary to wait long enough to collect all the required data. In contrast, an incremental learning approach may allow us to build an initial classifier with a smaller number of samples and update it incrementally when new data are collected. In this study, an incremental learning algorithm for Gaussian Discriminant Analysis (iGDA) based on the Graybill and Deal weighted combination of estimators is introduced. Each time a new set of data becomes available, a new estimation is carried out and a combination with a previous estimation is performed. iGDA does not require access to the previously used data and is able to include new classes that were not in the original analysis, thus allowing the customization of the models to the distribution of data at a particular clinical center. An evaluation using five benchmark databases has been used to evaluate the behaviour of the iGDA algorithm in terms of stability-plasticity, class inclusion and order effect. Finally, the iGDA algorithm has been applied to automatic brain tumour classification with magnetic resonance spectroscopy, and compared with two state-of-the-art incremental algorithms. The empirical results obtained show the ability of the algorithm to learn in an incremental fashion, improving the performance of the models when new information is available, and converging in the course of time. Furthermore, the algorithm shows a negligible instance and concept order effect, avoiding the bias that such effects could introduce. © 2011 Elsevier Inc.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

N-methyl-D-aspartate blocks activation of JNK and mitochondrial apoptotic pathway induced by potassium deprivation in cerebellar granule cells

  • Xifró Collsamata, Francesc Xavier
  • Falluel-Morel, Anthony
  • Miñano Molina, Alfredo Jesús|||0000-0002-7761-5682
  • Aubert, Nicolas
  • Fadó, Rut|||0000-0002-3293-2342
  • Malagelada, Cristina|||0000-0001-7185-436X
  • Vaudry, David
  • Gonzalez, Bruno
  • Rodríguez Álvarez, José|||0000-0001-8582-8082
During the postnatal development of cerebellum, lack of excitatory innervation from the mossy fibers results in cerebellar granule cell (CGC) apoptosis during the migration of the cells toward the internal granule cell layer. Accordingly, CGCs die by apoptosis when cultured in physiological KCl concentrations (5 mM; K5), and they survive in the presence of depolarizing conditions such as high KCl concentration (25 mM; K25) or N-methyl-D-aspartate (NMDA). We have recently shown that NMDA is able to exert a long lasting neuroprotective effect when added to immature (2 days in vitro) CGC cultures by inhibition of caspase-3 activity. Here we show that NMDA- and K25-mediated neuroprotection is associated with an increase in the levels of Bcl-2, an inhibition of K5-mediated increase in Bax, and the inhibition of the release of apoptogenic factors from mitochondria such as Smac/DIABLO and cytochrome c. Moreover, we have shown that similar effects are observed when c-Jun N-terminal kinases (JNKs) are inhibited and that treatment of CGC cultures with NMDA blocks K5-mediated JNK activation. These results allow us to postulate that the inhibition of JNK-mediated release of apoptogenic factors from mitochondria is involved in the NMDA protection from K5-mediated apoptosis of CGCs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Una oració en hexàmetres llatins adreçada a la Mare de Déu de Montserrat atribuïble al rei Felip III (1599)

Dipòsit Digital de Documents de la UAB
Publicación Libro o Monografía (Book)

Gestió i resolució de conflictes al segle XXI, ciutadania i violència

  • Casanovas, Pompeu|||0000-0002-0980-2371
  • Poblet Balcell, Marta|||0000-0002-0026-989X
  • Bland, Byron
  • Fisas, Vicenç
  • Montero, Txema
  • Puntes, Salvador
  • Recasens, Amadeu
  • Roberts, Simon
  • Vendrell, Francesc
  • Vilanova, Pere
  • Vinyamata, Eduard
Dipòsit Digital de Documents de la UAB
Publicación Libro o Monografía (Book)

Informe de la comunicació a Catalunya 2001‒2002

Dipòsit Digital de Documents de la UAB
Publicación Libro o Monografía (Book)

Informe de la comunicació a Catalunya 2003‒2004

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Fully Coupled Multi-Hybrid FEM-PO/PTD-UTD Method for the Analysis of Radiation Problems

  • Fernández Recio, Raúl
  • García Castillo, Luis Emilio
  • Gómez Revuelto, Ignacio
  • Salazar Palma, Magdalena
A multi-hybrid method combining the finite element method (FEM) and several high frequency techniques (HFTs) for the efficient analysis of the radiation and scattering of electromagnetic waves on complex three-dimensional environments is presented. It makes use of FEM for the regions with small and complex features and one or several HFTs for the analysis of the electrically large objects of the structure. The hybridization is done in a fully-coupled way taking into account mutual interactions between the FEM domains and the objects analyzed with HFTs. Two main HFTs are used: physical optics (PO) and the uniform theory of diffraction (UTD) in order to take advantage of the use of distributed and point sources. Physical theory of diffraction (PTD) is also used when needed in order to improve the accuracy of PO., This work was supported by the Ministerio de Educación y Ciencia of Spain under projects TIC2001-1019 and TEC2004- 06252/TCM.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Murine ES-derived pancreatic acinar cells recapitulate features of early pancreatic differentiation

  • Rovira Clusellas, Meritxell
  • Delaspre, Fabien
  • Massumi, Mohammad
  • Serra Pascual, Selma A., 1981-
  • Valverde, M. A. (Miguel Ángel), 1963-
  • Lloreta, Josep, 1958-
  • Dufresne, Marlène
  • Payré, Bruno
  • Konieczny, Stephen F.
  • Savatier, Pierre
  • Real, Francisco X.
  • Skoudy, Anouchka
Background & Aims: Acinar cells constitute 90% of the pancreas epithelium, are polarized, and secrete digestive enzymes. These cells play a crucial role in pancreatitis and pancreatic cancer. However, there are limited models to study normal acinar cell differentiation in vitro. The aim of this work was to generate and characterize purified populations of pancreatic acinar cells from embryonic stem (ES) cells. Methods: Reporter ES cells (Ela-pur) were generated that stably expressed both β-galactosidase and puromycin resistance genes under the control of the elastase I promoter. Directed differentiation was achieved by incubation with conditioned media of cultured fetal pancreatic rudiments and adenoviral-mediated co-expression of p48/Ptf1a and Mist1, 2 basic helix-loop-helix transcription factors crucial for normal pancreatic acinar development and differentiation. Results: Selected cells expressed multiple markers of acinar cells, including digestive enzymes and proteins of the secretory pathway, indicating activation of a coordinated differentiation program. The genes coding for digestive enzymes were not regulated as a single module, thus recapitulating what occurs during in vivo pancreatic development. The generated cells displayed transient agonist-induced Ca2+ mobilization and showed a typical response to physiologic concentrations of secretagogues, including enzyme synthesis and secretion. Importantly, these effects did not imply the acquisition of a mixed acinar-ductal phenotype. Conclusions: These studies allow the generation of almost pure acinar-like cells from ES cells, providing a normal cell-based model for the study of the acinar differentiation program in vitro., This study was supported by Spanish Ministry of Education and Science Grants (SAF2001-0432 and GEN2001-4748-C05 to A.S.; GEN2001-4748-C01 and SAF2004-01137 to F.X.R. and SAF2006-4973 to M.A.V.), Instituto de Salud Carlos III grants (02/3053 and PI05/2738 to A.S.; and Red HERACLES to M.A.V.), Catalan Government grants (SGR2005 to M.A.V.), and by a National Institutes of Health grant (DK55489 to S.F.K.). A.S. was supported by the Instituto de Salud Carlos III; M.R., F.D. and M. M. were recipients of a Graduate Fellowship from the Ministry of Education and Science, Instituto de Salud Carlos III, and the Catalan Government, respectively.
Repisalud
Publicación Artículo científico (JournalArticle)

Anxiety, Depression and Quality of Life in Older Adults: Trajectories of Influence across Age

  • Ribeiro, Oscar
  • Teixeira, Laetitia
  • Araújo, Lia
  • Rodriguez-Blazquez, Carmen
  • Calderón-Larrañaga, Amaia
  • Forjaz, Maria João
This study focuses on the influence of anxiety and depression on individual trajectories of quality of life in old age through a longitudinal approach. A representative sample of adults aged 50+ living in Portugal and participating in wave 4 (W4) and wave 6 (W6) of the Survey of Health, Ageing and Retirement in Europe (SHARE) project was considered. Participants, 1765 at baseline (W4) and 1201 at follow up (W6), were asked about their quality of life (CASP-12) and emotional status (Euro-D scale; five items from the Beck Anxiety Inventory). Linear Mixed Effects models were performed to identify factors associated with changes in quality of life across age. Increasing age was found to have a significant negative effect on quality of life. Lower education and higher levels of depression and anxiety at baseline were also associated with worse quality of life; 42.1% of the variation of CASP-12 across age was explained by fixed and random effects, being depression followed by anxiety as the factors that presented with the highest relative importance. Both depression and anxiety play an important role in quality of life in older adults and must be acknowledged as important intervention domains to foster healthy and active aging.
Repisalud
Publicación Artículo científico (JournalArticle)

Active ageing profiles among older adults in Spain: A Multivariate analysis based on SHARE study

  • Rojo Pérez, Fermina
  • Rodríguez-Rodríguez, Vicente
  • Molina-Martínez, María-Ángeles
  • Fernández-Mayoralas, Gloria
  • Sánchez-González, Diego
  • Rojo-Abuin, Jose Manuel
  • Ayala, Alba
  • Rodriguez-Blazquez, Carmen
  • Calderón-Larrañaga, Amaia
  • Ribeiro, Oscar
  • Forjaz, Maria João
Background: Following the active ageing model based on the Health, Lifelong Learning, Participation and Security pillars, this research has a twofold objective: i) to classify older adults according to active ageing profiles, taking into account the four pillars, and ii) to ascertain the relationship between the profiles and personal and contextual factors, as well as well-being and quality of life in old age. Methods: A study sample of 5,566 Spanish older adults who participated in wave 6 of the Survey of Health, Ageing and Retirement in Europe (SHARE) was included. Data were analysed in different steps applying several statistical analyses (Principal Component, Cluster, Discriminant, Multiple Correspondence and bivariate analysis with Pearson chi-square and ANOVA). Results: Five older adult profiles were obtained (I: with moderate activity; II: quasi-dependents; III: with active ageing-limiting conditions; IV: with diverse and balanced activity; V: with excellent active ageing conditions). The first three profiles were characterised by subjects with a high average age, low educational level, who were retired or housewives, and who perceived a moderate level of loneliness, satisfaction with the social network and quality of life, as well as having a larger family network, but living in small households or alone. In contrast, the latter two profiles showed better personal and contextual conditions, well-being and quality of life. Discussion and conclusions: The multidimensional approach to active ageing followed in this article has revealed the presence of several older adult profiles, which are confined to groups with better or worse active ageing conditions. In this context, if ageing is a process that reflects the previous way of life, intervention priorities will have to consider actions that promote better conditions during the life cycle.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Hydrogen-Bonded Supramolecular meso-Helix

  • Blay, G.
  • Fernández, I.
  • Pedro, J. R.
  • Ruiz-García, R.
  • Cano, J.
  • Carrasco, R.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] A new one-dimensional hydrogen-bonded polymer with a unique meso-helical structure has been prepared from the spontaneous self-assembly in the solid-state of meta-substituted phenylene dioxamic acid diethyl ester monomers. The helical nature of this molecule and its self-complementary character, through intermolecular hydrogen bonding between oxamic acid ester functions, are the two main factors responsible for the crystalline aggregation process, as confirmed by both experimental X-ray crystallographic data and theoretical ab initio calculations., This work was supported by the Ministerio de Ciencia y Tecnología (Spain) through the Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica (I+D+I) (Projects ref. BQU2001-3017 and BQU2001-2928) and the Ramon y Cajal programs. We thank Profs. Miguel Julve and Francesc Lloret, and Dr. José¿ A. Real for their continuing interest in this work and fruitful discussions during the preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

The MORFO3D foot database

  • García Hernández, José
  • Juan Císcar, Alfons
  • Nácher Rodríguez, Beatriz
  • Alemany, Sandra
  • Alcántara, Enrique
  • González, Juan Carlos
  • Heras, Stella|||0000-0001-6212-9377
  • Paredes Palacios, Roberto
A foot database comprising 3D foot shapes and footwear fitting reports of more than 300 participants is presented. It was primarily acquired to study footwear fitting, though it can also be used to analyse anatomical features of the foot. In fact, we present a technique for automatic detection of several foot anatomical landmarks, together with some empirical results., Work supported by the “Agència Valenciana de Ciència i Tecnologia” under grant GRUPOS03/031 and the Spanish projects DPI2001-0880-CO2-01 and DPI2001-0880-CO2-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel Prediction Methods of Multicarrier Multipactor for Space Industry Standards

  • Anza, Sergio
  • Puech, Jerome
  • Raboso, David
  • Wochner, Ulrich
  • Mader, Philippe
  • Koch, Olivier
  • Angevain, Jean-Christophe
  • Hong, Un-Pyo
  • Magnusson, Per
  • Montero, Isabel
  • Belhaj, Mohamed
  • Petit, John
  • Gil, Jordi
  • Vicente, Carlos
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Multipactor prediction methods are of high relevance for the space industry in order to prevent its appearance during the design phase of RF high-power components. Up to the present time, prediction for multicarrier signals has been covered by an empirical rule, the 20-gap-crossing rule (20GCR), proposed in the 2003 version of the multipactor standard published by the European Cooperation for Space Standardization (ECSS). The 20GCR has been widely used by the space industry, although some studies have demonstrated that it might be inaccurate in some situations. The latest version of the ECSS multipactor standard, published in 2020, presents two novel methods for multipactor prediction with multicarrier signals: the pulsed method and the envelope sweep (ES) method, both simple, accurate enough, and suitable for industry standards. While the pulsed model is a simple and fast method based on a 1-D analytical theory, the ES method is more accurate and able to deal with real 3-D microwave structures. This article details both multipactor prediction methods, as well as their practical validation with a large dataset from previous analytical studies and experimental activities., The authors would like to thank the ESA-ESTEC and ASD-Eurospace for the creation and support of the ECSSE-ST-20-01 working group for the update of the ECSS multipactor standard, which has been the motivation of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Contaminación superficial del Mediterraneo Noroccidental: detección de derrames de crudo

  • Platónov, Alexéi Konstantínovich
  • Redondo Apraiz, José Manuel
[ES] Se presenta una continuación temática del artículo “Aplicación de las imágenes SAR en el estudio de la dinámica de las aguas y de la polución del Mar Mediterráneo cerca de Barcelona”, publicado en la Revista “Ingeniería del Agua”, Vol. 8, N1 en marzo de 2001. Ahora el área de estudio se amplió y comprende toda la zona del Mediterráneo Noroccidental MN, es decir incluye el Mar Balear y el Golfo de León. Los resultados del análisis de cerca de 330 imágenes del Radar de Apertura Sintética, obtenidas mediante los proyectos Clean Seas, ERS-1/2 SAR Exploitation Study in Catalonia y Oil Watchnos permitieron obtener una visión general, pero estadísticamente justificada, sobre el estado del ambiente marino del MN en los años 1996 – 1998. Se constata que las rutas marítimas cercanas a Marseille están más limpias que cerca de Barcelona. Se evalúa la contaminación total del área, la contribución de los penachos de aguas residuales procedentes de los ríos regionales y de los pequeños pero “habitual, Agradecemos al Ministerio de Educación, Cultura y Deporte de España (SB2000-0076) y al Ministerio de Ciencia y Tecnología (FTN-2001-2220) por su ayuda financiera.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control de Plantas Solares con Generación Automática de Consignas

  • Cirre, Cristina M.
  • Valenzuela, Loreto
  • Berenguel, Manuel
  • Camacho, Eduardo F.
[ES] En este trabajo se muestran los resultados de operación de un campo de colectores solares del tipo cilindro parabólico de forma automática con una estructura de control por adelanto en paralelo con un controlador tipo I-PD que incorpora como principal novedad un sistema de generación automática de consignas. El objetivo de control para este sistema es mantener la temperatura del fluido a la salida del campo a un valor establecido, compensando las perturbaciones a las que está sometida la planta con dinámica fuertemente no lineal., Este trabajo se ha realizado en el ámbito del EU Improving Human Potential Programme y del acuerdo específico de colaboración entre la Plataforma Solar de Almería y el Grupo de Investigación "Automática, Electrónica y Robótica" de la Universidad de Almería (TEP197) titulado "Desarrollo de sistemas y herramientas de control para plantas termosolares" y de los proyectos financiados por la MCYT DPI2001-2380-C02 y DPI2002-04375-C03.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Forecasting Univariate Solar Irradiance using Machine learning models: A case study of two Andean Cities

  • Díaz-Bedoya, Daniel
  • González-Rodríguez, Mario
  • Clairand-Gómez, Jean-Michel
  • Serrano-Guerrero, Johnny Xavier
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] The integration of solar energy into power systems is essential for the future sustainability of power systems, particularly for isolated systems, such as microgrids, where establishing a primary transmission network is difficult. Therefore, the development of prediction methods becomes crucial to enable accurate forecasting of solar energy generation, facilitating efficient planning and operation of these systems and ensuring their long-term viability. This study proposes distinct forecasting models for solar irradiance forecasting: an autoregressive (AR) model, a Random Forest model, and a Long Short-Term Memory (LSTM) neural network. The methodology involves preprocessing the historical solar irradiance data and performing feature engineering to extract relevant input features. The architectural design, hyperparameter tuning, and training procedures of each model are discussed in detail. The findings indicate that the LSTM model exhibits enhanced performance compared to the AR model, while maintaining similar predictive accuracy to the Random Forest model in forecasting global solar irradiance. Both models yield a mean absolute percentage error of roughly 25%, with the LSTM exhibiting the lower error rate. Moreover, the LSTM model showcases an advancement over the AR model, resulting in a reduction of approximately 10 W/m2 for both root mean square error and mean absolute error. This finding highlights the effectiveness of LSTM networks in capturing long-term dependencies for accurate solar irradiance forecasting. Furthermore, an analysis of the models' interpretability is conducted, offering valuable insights into the key factors that contribute to the shaping of solar irradiance patterns. These insights hold practical significance for the optimization of renewable energy systems., This work has been funded by Universidad de las Americas, Ecuador, projects SIS.MGR.23.13.01 and IEA.JCG.20.01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control Tolerante a Fallos (Parte I): Fundamentos y Diagnóstico de Fallos

  • Puig, Vicenç
  • Quevedo, Joseba
  • Escobet, Teresa
  • Morcego, Bernardo
  • Ocampo, Carlos
[ES] En este artículo se presentan los fundamentos del control tolerante a fallos, se introduce el análisis estructural como una herramienta útil para el análisis y el diseño tanto del sistema de diagnostico como de los mecanismos de tolerancia a fallos, finalizando con una revisión de los métodos de diagnóstico existentes. Algunas de las técnicas de diagnostico presentadas se aplican en un proceso real, basado en el sistema de control de la red de alcantarillado de Barcelona. En un segundo artículo se presentarán los mecanismos de tolerancia que se pueden activar una vez se ha diagnosticado el fallo y serán aplicados sobre el mismo ejemplo., Trabajo subvencionado por la CICYT del Ministerio de Ciencia y Tecnología Español (DPI2002-0350) y por la DGR de la Generalitat de Catalunya (grupo SAC2001/SGR/00236).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

En Busca de la Integración de Herramientas de Tiempo Real a Través de un Modelo Abierto, Towards the integration of real-time tools using an open model

  • Drake, J. M.
  • González Harbour, M.
  • Gutiérrez, J.J.
  • Medina, J.L.
  • Palencia, J.C.
[EN] This paper presents MAST, a suit that integrates tools for the analysis and design of real-time distributed systems, which enables their interoperability along the development process, and is open to extend its modeling capabilities and tools with new algorithms and design methods. Its architecture is described, it is based on the formal, standardized and extensible specification of the data structures that support the real-time models and the results that are obtained from the tools. These data structures as well as the modeling methodology constitute the basis for the interoperability among its tools. The available tools are presented and the appropriateness of them for the development of real-time distributed applications is justified, in particular when using Ada95 or real-time operating systems POSIX 1003.13., [ES] Se presenta el entorno MAST, que integra herramientas de análisis y diseño de sistemas distribuidos de tiempo real, facilitando su interoperatividad a lo largo del proceso de desarrollo, y está abierto para extender su capacidad de modelado e implementar herramientas con nuevos algoritmos o métodos de diseño. Se describe su arquitectura, basada en la especificación formal, estandarizada y extensible de las estructuras de datos que soportan los modelos de tiempo real y los resultados de las herramientas. Estas estructuras de datos y la metodología de modelado constituyen la base de la interoperatividad entre las herramientas que incorpora. Se presentan las herramientas disponibles y se justifica su adecuación para el desarrollo de aplicaciones distribuidas de tiempo real desarrolladas con Ada 95 o sobre sistemas operativos de tiempo real con interfaz POSIX 1003.13., Este trabajo ha sido financiado en parte por la Comisión Interministerial de Ciencia y Tecnología del Gobierno Español (CICYT) a través del proyecto de investigación con referencia TIC2002-04123-C03-02 (TRECOM), y por el programa IST de la Comisión Europea a través del proyecto de investigación FIRST con referencia IST-2001-34820.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new species of Doratodon (Crocodyliformes: Ziphosuchia) from the Late Cretaceous of Spain

  • Company Rodríguez, Julio|||0000-0001-8223-4182
  • Pereda-Suberbiola, Xavier
  • Ruiz-Omeñaca, José Ignacio
  • Buscalioni, Angela D.
[EN] A new species of a ziphodont crocodyliform is described on the basis of newly-discovered material from the Late Cretaceous (Campanian) Sierra Perenchiza Formation of Valencia, Spain. It is referred to the genus Doratodon as D. ibericus sp. nov. To date, Doratodon (type-species D. carcharidens) was only known by fragmentary cranial remains from the Campanian of Muthmannsdorf (Austria). This genus was previously regarded either as a goniopholid or as a hsisosuchid within the Mesoeucrocodylia, but a phylogenetic analysis suggests that Doratodon is a member of Ziphosuchia, placing it as the sister taxon of Sebecosuchia. Doratodon shares with Sebecosuchia (including Bergisuchus) features concerning the shape and implantation of teeth (margins of tooth crowns with denticulate carinae; tip of tooth crowns caudally curved; tooth implantation in isolated alveoli). Its inclusion in Ziphosuchia is based also on mandibular traits (splenials broad and robust behind symphysis, sculpturing of lateral surface of dentary based on development of longitudinal depression). The absence of the external mandibular fenestra is an autopomorphy of Doratodon in the context of Ziphosuchia. Doratodon is characterized by: short and narrow rostrum with reduced dentition (11 to 13 dentary teeth); dorsal profile of lower jaw showing two vertical waves. The most distinctive characteristic of the new species relative to D. carcharidens is the heterodonty in size of teeth, especially in the caudal part of the dental series. From a palaeobiogeographical point of view, Doratodon represents the first occurrence of a sebecosuchian-like crocodyliform in the Late Cretaceous of Europe., We thank Prof. Dr. G. Rabeder and Mag. Dr. K. L. Rauscher (IPUW, Vienna) for access to specimens in their care. We are also grateful to F. Ortega (Madrid) for useful suggestions and Dr. M. Feist (Montpellier) for providing the age of the Chera locality based on charophytes. Financial support for research and field work was provided by the following institutions: The Jurassic Foundation, Generalitat Valenciana, Ministerio de Ciencia y Tecnología (project BTE2001 0185-C02 01) and Ministerio de Asuntos Exteriores (project HU2000 0004). Financial support for the research project of the second author (X.P.S.) has been provided by the Ramon y Cajal Program from the Ministerio de Ciencia y Tecnología of Spain. We would also like to thank all the students, colleagues, and friends who have accompanied us in field seasons, collecting a large number of fossil specimens. The quality of the manuscript benefited from scientific and linguistic comments from two anonymous reviewers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemistry and reactivity of dinuclear manganese oxamate complexes: Aerobic catechol oxidation catalyzed by high-valent bis(oxo)-bridged dimanganese(IV) complexes with a homologous series of binucleating 4,5-disubstituted-o-phennylenedioxamate ligands

  • Blay, G.
  • Fernández, I.
  • Pedro, J. R.
  • Ruiz-García, R.
  • Temporal-Sánchez, T.
  • Pardo, E.
  • Lloret, F.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] The high-valent bis(oxo)-bridged dimanganese(IV) complexes with the series of binucleating 4.5-X-2-o-phenylenebis(oxamate) ligands (opbaX(2); X = H, Cl, Me) (1a-c) have been synthesized and characterized structurally, spectroscopically and magnetically. Complexes la-c possess unique Mn-2(mu-O)(2) core structures with two o-phenylenediamidate type additional bridges which lead to exceptionally short Mn-Mn distances (2.63-2.65 angstrom) and fairly bent Mn-O-Mn angles (94.1 degrees-94.6 degrees). The cyclovoltammograms of la-c in acetonitrile (25 degrees C, 0.1 M Bu4NPF6) show an irreversible one-electron oxidation peak at moderately high anodic potentials (E-ap = 0.50-0.85 V versus SCE), while no reductions are observed in the potential range studied (down to -2.0 V versus SCE). These dinuclear manganese oxamate complexes are excellent catalysts for the aerobic oxidation of 3,5-di-tert-butylcatechol to the corresponding o-quinone in acetonitrile at 25 degrees C. The order of increasing catecholase activity (k(obs)) with the electron donor character of the ligand substituents as 1b (X = Cl) < 1a (X = H) < 1c (X = Me) correlates with Hammett sigma(+) values (p = -0.95). A mechanism involving initial activation of the catechol substrate by coordination to the dimetal center and subsequent oxidation to quinone by O-2 is proposed, which is consistent with the observed saturation kinetics., This work was supported by the Ministerio de Ciencia y Tecnología (Spain) (Project BQU2001-3017) and the Ramon y Cajal program. Further support from the Generalitat Valenciana (Spain) (Project CTIDIA2002-131 and AVCYT Grupos 03/168) is also acknowledged. E. P. thanks the Ministerio de Educación, Cultura y Deporte (Spain) for a grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Human Mesenchymal Stem Cells Growth and Osteogenic Differentiation on Piezoelectric Poly(vinylidene fluoride) Microsphere Substrates

  • Sobreiro-Almeida, Rita
  • Tamaño-Machiavello, María Noel
  • Carvalho, E.O.
  • Cordon, Lourdes
  • Doria, S.
  • Senent, Leonor
  • Correia, D. M.
  • Ribeiro, C.
  • Lanceros-Méndez, S.
  • Sempere-Talens, Amparo
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The aim of this work was to determine the influence of the biomaterial environment on human mesenchymal stem cell (hMSC) fate when cultured in supports with varying topography. Poly(vinylidene fluoride) (PVDF) culture supports were prepared with structures ranging between 2D and 3D, based on PVDF films on which PVDF microspheres were deposited with varying surface density. Maintenance of multipotentiality when cultured in expansion medium was studied by flow cytometry monitoring the expression of characteristic hMSCs markers, and revealed that cells were losing their characteristic surface markers on these supports. Cell morphology was assessed by scanning electron microscopy (SEM). Alkaline phosphatase activity was also assessed after seven days of culture on expansion medium. On the other hand, osteoblastic differentiation was monitored while culturing in osteogenic medium after cells reached confluence. Osteocalcin immunocytochemistry and alizarin red assays were performed. We show that flow cytometry is a suitable technique for the study of the differentiation of hMSC seeded onto biomaterials, giving a quantitative reliable analysis of hMSC-associated markers. We also show that electrosprayed piezoelectric poly(vinylidene fluoride) is a suitable support for tissue engineering purposes, as hMSCs can proliferate, be viable and undergo osteogenic differentiation when chemically stimulated., The authors thank the Portuguese Foundation for Science and Technology (FCT) for financial support under project PTDC/EEI-SII/5582/2014, Strategic Funding UID/FIS/04650/2013 and grants SFRH/BPD/90870/2012 (C.R.) and SFRH/BPD/121526/2016 (D.M.C). The authors acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) and from the Basque Government Industry Department under the ELKARTEK program. JLGR, LC, RSS and AS acknowledge funding by the Conselleria de Educacion, Investigacion, Cultura y Deporte of the Generalitat Valenciana through PROMETEO/2016/063 project. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development. This work was partially financed with FEDER funds (CIBERONC (CB16/12/00284)). The authors acknowledge the assistance and advice of Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemistry and reactivity of mononuclear manganese oxamate complexes: Oxidative carbon-carbon bond cleavage of vic-diols by dioxygen and aldehydes catalyzed by a trans-dipyridine manganese(III) complex with a tetradentate o-phenylenedioxamate ligand

  • Barroso, S.
  • Blay, G.
  • Fernández, I.
  • Pedro, J. R.
  • Ruiz-García, R.
  • Pardo, E.
  • Lloret, F.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] Two new mononuclear octahedral manganese(III) complexes with the tetradentate equatorial ligand o-phenylenebis(oxamate) (opba) and two aquo (1a) or two pyridine (1b) axial ligands have been synthesized and characterized structurally, magnetically, and electrochemically. The cyclovoltammogram of 1a in acetonitrile (25 degrees C, 0.1 M Bu4NPF6) shows an irreversible one-electron oxidation peak at a high anodic potential (E-ap = 1.03 V versus SCE), while that of 1b shows two well-separated one-electron oxidation peaks at moderate to high anodic potentials (E-ap = 0.92 and 1.27 V versus SCE), the first redox-wave being quasireversible in nature. The access to formally high-valent Mn-IV and Mn-V oxidation states for 1b is attributed to the stabilization effect of axial pyridine ligand coordination. Complex 1b has been used as an efficient catalyst for the aerobic oxidative cleavage of aromatic vic-diols with co-oxidation of pivalaldehyde to pivalic acid. The corresponding aldehydes or ketones are obtained in fair to good yields and moderate selectivities in acetonitrile at 40 degrees C. Under the same experimental conditions, complex la shows lower efficiencies and selectivities than 1b. The modulation of catalytic activity by the axial pyridine ligands highlights the role of oxomanganese(V) species as the putative intermediates in these C-C bond cleavage oxidation reactions., This work was supported by the Ministerio de Ciencia y Tecnología (Spain) (Project BQU2001 3017) and the Ramon¿ y Cajal program. Further support from the Generalitat Valenciana (Spain) (Project CTIDIA2002 131 and AVCYT Grupos 03/168) is also acknowledged. SB and EP thank the Universitat de Valencia and the Ministerio de Educación, Cultura y Deporte (Spain), respectively, for grants. We are specially thankful to S. Currelli for the assistance with the electrochemical measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new interval prediction methodology for short-term electric load forecasting based on pattern recognition

  • Serrano-Guerrero, Xavier
  • Briceño-León, Marco
  • Clairand, Jean-Michel
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] Demand prediction has been playing an increasingly important role for electricity management, and is fundamental to the corresponding decision-making. Due to the high variability of the increasing electrical load, and of the new renewable energy technologies, power systems are facing technical challenges. Thus, short-term forecasting has crucial utility for generating dispatching commands, managing the spot market, and detecting anomalies. The techniques associated with machine learning are those currently preferred by researchers for making predictions. However, there are concerns regarding limiting the uncertainty of the obtained results. In this work, a statistical methodology with a simple implementation is presented for obtaining a prediction interval with a time horizon of seven days (15-min time steps), thereby limiting the uncertainty. The methodology is based on pattern recognition and inferential statistics. The predictions made differ from those from a classical approach which predicts point values by trying to minimize the error. In this study, 96 intervals of absorbed active power are predicted for each day, one for every 15 min, along with a previously defined probability associated with the real values being within each obtained interval. To validate the effectiveness of the predictions, the results are compared with those from techniques with the best recent results, such as artificial neural network (ANN) long short-term memory (LSTM) models. A case study in Ecuador is analyzed, resulting in a prediction interval coverage probability (PICP) of 81.1% and prediction interval normalized average width (PINAW) of 10.13%, with a confidence interval of 80%.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Prediction of Postpartum Depression Using Multilayer Perceptrons and Pruning

  • Tortajada, S.
  • Vicente, J.
  • Sanjuán, J.
  • de Frutos, R.
  • Martín-Santos, R.
  • García-Esteve, L.
  • Gornemann, I.
  • Gutiérrez-Zotes, A.
  • Canellas, F.
  • Carracedo, A.
  • Gratacos, M.
  • Guillamat, R.
  • Baca-García, E.
  • Robles Viejo, Montserrat
  • Garcia-Gomez, Juan M
[EN] Objective: The main goal of this paper is to obtain a classification model based on feed-forward multilayer perceptrons in order to improve postpartum depression prediction during the 32 weeks after childbirth with a high sensitivity and specificity and to develop a tool to be integrated in a decision support system for clinicians. Materials and Methods: Multilayer perceptrons were trained on data from 1397 women who had just given birth, from seven Spanish general hospitals, including clinical, environmental and genetic variables. A prospective cohort study was made just after delivery, at 8 weeks and at 32 weeks after delivery. The models were evaluated with the geometric mean of accuracies using a hold-out strategy. Results: Multilayer perceptrons showed good performance (high sensitivity and specificity) as predictive models for postpartum depression. Conclusions: The use of these models in a decision support system can be clinically evaluated in future work. The analysis of the models by pruning leads to a qualitative interpretation of the influence of each variable in the interest of clinical protocols., This work was partially funded by the Spanish Ministerio de Sanidad (PIC41635, Vulnerabilidad genetico-ambiental a la depresion posparto, 2006-2008) and the Instituto de Salud Carlos III (RETICS Combiomed, RD07/0067/2001). The authors acknowledge to Programa Torres Quevedo from Ministerio de Educacion y Ciencia, co-founded by the European Social Fund (PTQ05-02-03386 and PTQ-08-01-06802)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Products of pairwise totally permutable groups

  • Hauck, P
  • Pérez-Ramos, M.D.
  • Martínez-Pastor, Ana|||0000-0002-0208-4098
[EN] In this paper finite groups factorized as products of pairwise totally permutable subgroups are studied in the framework of Fitting classes, A.M.-P. and M.D.P.-R. were both supported by Proyecto BMF20001-1667-C03-03, Ministerio de Ciencia y Tecnolog´ıa and FEDER, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compatibility between 3T 1H SV-MRS data and automatic brain tumour diagnosis support systems based on databases of 1.5T 1H SV-MRS spectra

  • Fuster García, Elíes|||0000-0002-0716-8960
  • Garcia-Gomez, Juan M
  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Martínez-Bisbal, M.Carmen|||0000-0002-8526-4413
  • Navarro., Clara
  • Vicente Robledo, Javier
  • Tortajada Velert, Salvador
  • Calvar ., Jorge
  • Griffiths ., John
  • Julia Sape, Margarita
  • Howe ., Franklyn A
  • Pujol ., Jesús
  • Peet ., Andrew C
  • Heerschap ., Arend
  • Moreno Torres, Àngel
  • Martinez Granados, Beatriz
  • Wesseling ., Pieter
  • Semmler ., Wolfhard
  • Capellades ., Jaume
  • Majós ., Carles
  • Alberich Bayarri, Ángel
  • Capdevila ., Antoni
  • Monleón ., Daniel
  • Marti Bonmati, Luis
  • Arús ., Carles
  • Celda ., Bernardo
  • Robles Viejo, Montserrat
Object: This study demonstrates that 3T SV-MRS data can be used with the currently available automatic brain tumour diagnostic classifiers which were trained on databases of 1.5T spectra. This will allow the existing large databases of 1.5T MRS data to be used for diagnostic classification of 3T spectra, and perhaps also the combination of 1.5T and 3T databases. Materials and methods: Brain tumour classifiers trained with 154 1.5T spectra to discriminate among high grade malignant tumours and common grade II glial tumours were evaluated with a subsequently-acquired set of 155 1.5T and 37 3T spectra. A similarity study between spectra and main brain tumour metabolite ratios for both field strengths (1.5T and 3T) was also performed. Results: Our results showed that classifiers trained with 1.5T samples had similar accuracy for both test datasets (0.87 ± 0.03 for 1.5T and 0.88 ± 0.03 for 3.0T). Moreover, non-significant differences were observed with most metabolite ratios and spectral patterns. Conclusion: These results encourage the use of existing classifiers based on 1.5T datasets for diagnosis with 3T 1H SV-MRS. The large 1.5T databases compiled throughout many years and the prediction models based on 1.5T acquisitions can therefore continue to be used with data from the new 3T instruments. © 2011 ESMRMB., We would like to thank Miriam Camison-Sanchez for help in the quality control of the MRS data and diagnosis validation. This work was partially funded by the European Commission (FP6-2002-LIFESCIHEALTH 503094) and (IST-2004-27214), the I + D support program of the Universitat Politecnica de Valencia and by the Health Institute Carlos III through the RETICS Combiomed, RD07/0067/2001. CIBER-BBN is an initiative funded by the VI National R&D&D&I Plan 2008-2011, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors acknowledge to Programa Torres Quevedo from Ministerio de Educacion y Ciencia, co-founded by the European Social Fund (PTQ05-02-03386, PTQ-08-01-06802, PTQ-08-01-06817).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mass Effect on the Equienergetic High-Spin/Low-Spin States of Spin-Crossover in 4,4&apos, -Bipyridine-Bridged Iron(II) Polymeric Compounds: Synthesis, Structure, and Magnetic, Mössbauer, and Theoretical Studies

  • Moliner, N.
  • Létard, S.
  • Salmon, L.
  • Tuchagues, J. P.
  • Bousseksou, A.
  • Real, J. A.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] The suitability of the system [Fe(4,4`-bipy)(H2O)2(NCX)2]·(4,4`-bipy), where 4,4`-bipy stands for 4,4`-bipyridine and X = S (1) and Se (2), as a precursor for the synthesis of new polymeric spin-crossover compounds has been studied. The reaction of 1 or 2 with bt (2,2`-bithiazoline) afforded the polymeric compounds of formula [Fe(4,4`-bipy)(bt)(NCX)2] (X = S (3), Se (4)). Compounds 3 and 4 are isostructural, but only the crystal structure of 3 has been fully determined. It crystallizes in the orthorhombic system, Fdd2 space group, Z = 24, with a = 38.962(8) Å, b = 11.545(2) Å, c = 30.889(6) Å, V = 13895(5) Å3. The structure consists of linear chains constituted by trans-4,4`-bipy linked iron(II) ions; two cis equatorial positions are occupied by two pseudohalide ligands, and the remaining positions are filled by the bidentate bt ligand. Investigation of their magnetic properties and Mössbauer spectra has revealed the occurrence of a low-spin (LS) ¿ high-spin (HS) conversion involving 12% (3, S) and 20% (4, Se) of the Fe(II) ions. The thermal variation of the HS fraction is gradual with onset temperatures as low as 60 K. A theoretical approach based on the Ising-like model, completed with molecular vibrations, through harmonic oscillators, fits the data successfully, leading to an energy gap of 65 cm-1 (3) and 86 cm-1 (4) between the lowest LS and HS levels, and an average vibration frequency ¿¿LS of 382 cm-1 (3) and 365 cm-1 (4) in the LS state. The ca. 1.05 ¿LS(3)/¿LS(4) ratio is close to the ca. 1.09 Se/S molar mass ratio. The simple electrovibrational Ising-like model permits us to explain, for the first time, a mass effect through the molecular vibrations in a spin-crossover complex that is in the unusual situation of equienergy among the HS and LS states., We thank the financial assistance from the Ministerio Español de Ciencia y Tecnología (Project BQU 2001-2928). We acknowledge the European Commission for granting the TMR-Network Thermal and Optical Switching of Molecular Spin States (TOSS) , Contract noERB-FMRX-CT98-0199EEC/TMR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Neural network modelling of wave overtopping at coastal structures

  • van Gent, Marcel R. A.
  • van den Boogaard, Henk F. P.
  • Pozueta, B
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] A method has been developed to estimate wave overtopping discharges for a wide range of coastal structures. The prediction method is based on Neural Network modelling. For this purpose use is made of a data set obtained from a large number of physical model tests (collected within the framework of the European project CLASH, see e.g. [Steendarn, G.J., Van der Meer, J.W., Verhaeghe, H., Besley, P., Franco, L. and Van Gent, MKA. (2004). The international database on wave overtopping. World Scientific, Proc. 29th ICCE, vol. 4, pp. 4301-4313, Lisbon, Portugal.]). Moreover, a method was developed to obtain confidence intervals for the overtopping predictions of the neural network., This study was co-sponsored by the Commission of the European Communities within the framework of the CLASH project (‘Crest Level Assessment of Coastal Structures by fullscale monitoring, neural network prediction and Hazard analysis on permissible wave overtopping’, contract EVK3–2001–00058).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

E-books in MetaLib - The PoliBuscador experiment

  • Ribes Llopes, Inmaculada|||0000-0003-3841-5490
  • Colomina Fons, Gloria
  • Muñoz-Navarro, Olga
[ES] El artículo describe la experiencia de la Universidad Politécnica de Valencia (UPV) en la integración de libros electrónicos dentro de su catálogo y portal MetaLib, denominado PoliBuscador (PB). Los autores, Inmaculada Ribes-Llopes, Olga Muñoz-Navarro y Gloria Colomina-Fons, destacan los desafíos asociados a la gestión de e-books debido a la falta de madurez de los modelos existentes y las limitaciones técnicas, especialmente en la interoperabilidad de los portales de libros electrónicos y en la administración de identificadores como el ISBN dentro de SFX. La UPV dispone de alrededor de 45.000 libros electrónicos provenientes de portales como Safari, E-Libro, NetLibrary y Referex Engineering. Para mejorar la recuperación de estos recursos, se creó un subcatálogo específico ("Catálogo UPV Libro electrónico"), permitiendo búsquedas independientes de los e-books dentro del PoliBuscador. El proceso consistió en copiar la configuración del catálogo general, establecer filtros basados en el campo 710 (nombre corporativo del editor) y añadir la nueva fuente a las categorías y “quicksets” del portal. Tras la implementación, se observó un aumento significativo en el uso de e-books, aunque los datos estadísticos disponibles eran limitados para establecer tendencias sólidas. La iniciativa mejoró la visibilidad de la colección, enriqueció los resultados de búsqueda y facilitó el acceso a contenidos especializados en inglés, optimizando la inversión realizada por la biblioteca.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identification of Single-Nucleotide Polymorphism in the Progesterone Receptor Gene and Its Association With Reproductive Traits in Rabbits

  • Peiró Barber, Rosa Mª|||0000-0002-3009-2343
  • Santacreu, María-Antonia|||0000-0002-6847-9551
  • Blasco Mateu, Agustín|||0000-0003-3558-0810
  • Merchán, M.
  • Argente, M. J.
  • García, M. L.
  • Folch, J. M.
[EN] A total of 598 F-2 does from a cross between the high and low lines selected divergently for uterine capacity during 10 generations were used in a candidate gene analysis. The presence of major genes affecting the number of implanted embryos and uterine capacity has been suggested in lines divergently selected for Uterine capacity. Uterine capacity is it main component of litter size. The progesterone receptor gene was tested as a candidate gene to determine whether polymorphisms explain differences in litter size and its components. Fragments of the promoter region and exons 1-8 were amplified and sequenced. One SNP was found in the promoter region, 2464G > A, three SNPs in the 5'-UTR exon 1, and a silence SNP in exon 7. The first four SNPs were segregated in two haplotypes. The allele G found in the promoter region was found in 75% of the high-line parental animals and in 29% of the low-line parental animals. The GG genotype had 0.5 kits and 0.5 implanted embryos more than the AA genotype. At 48 hr of gestation, the difference in early embryo survival and embryonic stage of development. was small. However, at 72 hr of gestation, the GG genotype had 0.36 embryos more than the AA genotype and also had a more advanced embryonic stage of development, showing a lower percentage of compacted morulae and a higher percentage of blastocysts. The difference in litter size between the GG and CA genotypes was similar to the difference found between homozygote genotypes; however, differences in implanted embryos, early embryo survival, and embryo development were not detected between the GG and GA genotypes., The authors are grateful for the excellent assistance provided by R. Muelas and to W. Mekkawi for his software. This study was funded by projects by the Comision Interministerial de Ciencia y Tecnologia AGL2001-3068 and AGL2005-07624. M. Merchan acknowledges a Formacion de Personal Investigador (FPI) grant from the Ministerio de Ciencia y Tecnologia (MCYT) and R. Peiro an FPI grant from Oficinade Ciencia y Tecnologia de la Generalitat Valenciana (OCYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Solving Ceramic Tile Factory Production Programming by MAS

  • Argente, Estefanía|||0000-0002-5431-3868
  • Giret Boggino, Adriana Susana|||0000-0002-2311-0785
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Gómez-Gasquet, Pedro|||0000-0002-9184-6735
  • Julian, Vicente|||0000-0002-2743-6037
[EN] This paper presents a system architecture to manage the production programming in a Ceramic Tile factory. The proposed architecture is based on the multi-agent system paradigm since it provides a natural way to solve problems in manufacturing industry domains. The production programming problem is considered as one of the main critical issues in a Ceramic Tile Company because obtaining an agile and reactive production planning and scheduling system is essential in manufacturing. The paper describes the proposed agent organization and the different needed scenarios and interactions in detail., This work has been partially funded by Polytechnic University of Valencia under grant PII-UPV 5574. Financial support from Spanish government under grant FPU AP2001-1516 and TIC2003-07369-C02-01 is also gratefully acknowledge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Long-Range Magnetic Coupling through Extended p-Conjugated Aromatic Bridges in Dinuclear Copper(II) Metallacyclophanes

  • Pardo, E.
  • Faus, J.
  • Julve, M.
  • Lloret, F.
  • Cano, J.
  • Ottenwaelder, X.
  • Journaux, Y.
  • Carrasco, R.
  • Blay, G.
  • Fernández, I.
  • Ruiz, R.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] Self-assembly of 1,4-phenylenebis(oxamate) and 4,4`-biphenylenebis(oxamate) ligands and Cu2+ ions gives two new dinuclear copper(II) metallacyclophanes where the two metal centers are connected by double para-substituted aromatic diamide bridges. Despite the relatively large intramolecular Cu¿Cu distance of ca. 8 and 12 Å for each complex, magnetic susceptibility measurements evidence strong to moderately strong intramolecular antiferromagnetic couplings (¿J values of the order of 100 and 10 cm-1, respectively). Density functional theory calculations on these compounds and their homologues with linear oligo-p-phenylenediamide bridges predict a rather slow exponential decay of magnetic coupling with increasing intermetal distance (r values up to 25 Å) along this novel series of dicopper metalla-amidocyclophanes., This work was supported by the Ministerio de Ciencia y Tecnología (Spain) through the Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica (Projects BQU2001-2928 and BQU2001-3017) and the Ramón y Cajal program. Further support from the TMR program of the European Union (Contract ERBFM-RXCT980181) is acknowledged. E.P. thanks the Ministerio de Educación, Cultura y Deporte (Spain) for a grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On totally permutable products of finite groups

  • Ballester Bolinches, Adolfo
  • Cossey, John
  • Esteban Romero, Ramón
[EN] The behaviour of totally permutable products of finite groups with respect to certain classes of groups is studied in the paper. The results are applied to obtain information about totally permutable products of T, PT, and PST-groups., This work has been supported by Grant BFM2001-1667-C03-03 (MCyT, Spain, and FEDER, European Union). This research has been carried out during the visits of the first and the third author to the Department of Mathematics of the Australian National University. They wish to express their gratitude to this institution for its kindness and financial support, as well as to the Universitat de Val`encia and the Universitat Polit`ecnica de Val`encia for their financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A generic and extensible automatic classification framework applied to brain tumour diagnosis in HealthAgents

  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Garcia-Gomez, Juan M
  • Robles Viejo, Montserrat
  • Vicente Robledo, Javier
  • Tortajada Velert, Salvador
  • Luts, Jan
  • Dupplaw, David
  • Van Huffel, Sabine
[EN] New biomedical technologies enable the diagnosis of brain tumours by using non-invasive methods. HealthAgents is a European Union-funded research project that aims to build an agent-based distributed decision support system (dDSS) for the diagnosis of brain tumours. This is achieved using the latest biomedical knowledge, information and communication technologies and pattern recognition (PR) techniques. As part of the PR development of HealthAgents, an independent and automatic classification framework (CF) has been developed. This framework has been integrated with the HealthAgents dDSS using the HealthAgents agent platform. The system offers (1) the functionality to search for distributed classifiers to solve specific questions; (2) automatic classification of new cases; (3) instant deployment of new validated classifiers; and (4) the ability to rank a set of classifiers according to their performance and suitability for the case in hand. The CF enables both the deployment of new classifiers using the provided Extensible Markup Language(1) classifier specification, and the inclusion of new PR techniques that make the system extensible. These features may enable the rapid integration of PR laboratory results into industrial or research applications, such as the HealthAgents dDSS. Two classification nodes have been deployed and they currently offer classification services by means of dedicated servers connected to the HealthAgents agent platform: one node being located at the Katholieke Universiteit Leuven, Belgium and the other at the Universidad Politecnica de Valencia, Spain. These classification nodes share the current set of brain tumour classifiers that have been trained from in vivo magnetic resonance spectroscopy data. The combination of the CF with a distributed agent system constitutes the basis of the brain tumour dDSS developed in HealthAgents., This work was partially funded by the European Commission: HealthAgents (contract no. FP6-2005-IST 027214). Jan Luts is a PhD student supported by an IWT grant. Carlos Saez, Salvador Tortajada and Javier Vicente are PhD students partially supported by the Programa Torres Quevedo from the Ministerio de Educacion y Ciencia, co-founded by the European Social Fund (PTQ-08-01-06817, PTQ-08-01-06802, PTQ05-02-03386). We thank INTERPRET partners for their support and for providing the data used for training some of the classifiers included in the HealthAgents network; in particular we thank C. Majos (IDI-Bellvitge), John Griffiths (SGUL), Arend Heerschap (RU), Witold Gajewicz (MUL), Jorge Calvar (FLENI), Margarida Julia-Sape (UAB) and Carles Arus (UAB). The language revision of this document was funded by the Universidad Politecnica de Valencia. This work has been partially supported by the Health Institute Carlos III through the RETICS Combiomed, RD07/0067/2001.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recreating Daily life in Pompeii

  • Magnenat-Thalmann, Nadia
  • Papagiannakis, George
[EN] We propose an integrated Mixed Reality methodology for recreating ancient daily life that features realistic simulations of animated virtual human actors (clothes, body, skin, face) who augment real environments and re-enact staged storytelling dramas. We aim to go further from traditional concepts of static cultural artifacts or rigid geometrical and 2D textual augmentations and allow for 3D, interactive, augmented historical character-based event representations in a mobile and wearable setup. This is the main contribution of the described work as well as the proposed extensions to AR Enabling technologies: a VR/AR character simulation kernel framework with real-time, clothed virtual humans that are dynamically superimposed on live camera input, animated and acting based on a predefined, historically correct scenario. We demonstrate such a real-time case study on the actual site of ancient Pompeii., The work presented has been supported by the Swiss Federal Office for Education and Science and the EU IST programme, in frame of the EU IST LIFEPLUS 34545 and EU ICT INTERMEDIA 38417 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The impact of random function model assumption for the identification of hydraulic conductivity fields in fractured media: Gaussian and non-Gaussian approaches

  • Rodrigo-Ilarri, Javier|||0000-0001-8380-7376
  • Capilla Romá, José Esteban|||0000-0002-3399-4596
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] In order to model the uncertainty about predictions based on groundwater flow and transport models, it is necessary to properly characterize the uncertainty of those parameters that vary spatially, such as porosity, water density or hydraulic conductivity. This paper presents an attempt to identify K in a 3D fractured medium within a non-Gaussian framework using the Conditional Probabilities Method (CPM), a non-Gaussian stochastic inverse modeling approach for the identification of K fields conditional to both direct K measurements and stationary pressure data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanoindentation and tapping mode AFM study of phase separation in poly(ethyl acrylate-co-hydroxyethyl methacrylate) copolymer networks

  • Salmerón Sánchez, Manuel
  • Romero Colomer, Francisco Jose
  • Molina Mateo, José|||0000-0002-0531-9876
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] According to our previous results the free radical copolymerization of ethyl acrylate and hydroxyethyl methacrylate gives rise to a system having chain composition and morphology different from that of the random mixture in the original solution. Besides, structural relaxation experiments revealed the existence of composition heterogeneity in the material. In this work, a deeper insight in the structure of this system is gained using atomic force microscopy (AFM) in the tapping mode and nanoindentation experiments. The material architecture of the copolymerized system is revealed to be formed by nanoaggregates as a consequence of the non-random polymerization process of the comonomers. (c) 2006 Elsevier Ltd. All rights reserved., The authors acknowledge the support of the Spanish Science and Technology Ministry through the MAT2001-2678-C02-01 project and the support to their research group by the Generalitat Valenciana through the Grupos 03/018 project. AFM was conducted by the microscopy service of the UPV, whose advice was greatly appreciated
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Communication between iron(II) building blocks in cooperative spin transition phenomena

  • Real, J. A.
  • Gaspar, A. B.
  • Niel, V.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] In the present article we discuss the cooperative nature of the spin crossover phenomenon in iron(II) complexes, providing a perspective of the state of the art in this area. The first aspect we discuss is the role of the intermolecular interactions, more precisely the ¿-interactions, in mononuclear complexes. We show that by playing with the nature of the ligands, aliphatic, aromatic, or extended aromatic, it is possible to create stronger cohesive forces and receive a more cooperative response from the compound. In the next step the singular family of bipyrimidine-bridged iron(II) dinuclear compounds is presented as the simplest example of polynuclear spin crossover complexes exhibiting a rich variety of magnetic behaviours, which stem from the synergistic effect between intramolecular and cooperative intermolecular interactions. Finally, a number of polymeric 1-3D architectures of varying dimensionality and topology are discussed in terms of the search for strong cooperative spin crossover systems., We are grateful for financial support from the European Commission through the TMR-Network project Thermal and Optical Switching of Spin States (TOSS) , Contract No. ERB-FMRX-CT98-0199EEC/TMR. Some important results here reviewed have been carried out in collaboration with other TOSS groups, in particular, pressure and Mössbauer experiments in presence of strong magnetic combined with LIESST effect, were performed together with Professor P. Gütlich and Dr. V. Ksenovontov and photomagnetic measurements with Professor O. Kahn and Dr. J.F. Létard to whom we are deeply grateful. We thank the financial assistance from the Ministerio Español de Ciencia y Tecnología (project BQU 2001-2928).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

BEaST: Brain extraction based on nonlocal segmentation technique

  • Eskildsen, Simon F.
  • Coupé, Pierrick
  • Fonov, Vladimir
  • Leung, Kelvin K.
  • Guizard, Nicolas
  • Wassef, Shafik N.
  • Østergaard, Lasse Riis
  • Collins, D. Louis
  • Manjón Herrera, José Vicente|||0000-0001-6640-927X
  • Alzheimer&apos;s Dis Neuroimaging
Brain extraction is an important step in the analysis of brain images. The variability in brain morphology and the difference in intensity characteristics due to imaging sequences make the development of a general purpose brain extraction algorithm challenging. To address this issue, we propose a new robust method (BEaST) dedicated to produce consistent and accurate brain extraction. This method is based on nonlocal segmentation embedded in a multi-resolution framework. A library of 80 priors is semi-automatically constructed from the NIH-sponsored MRI study of normal brain development, the International Consortium for Brain Mapping, and the Alzheimer's Disease Neuroimaging Initiative databases. In testing, a mean Dice similarity coefficient of 0.9834 ± 0.0053 was obtained when performing leave-one-out cross validation selecting only 20 priors from the library. Validation using the online Segmentation Validation Engine resulted in a top ranking position with a mean Dice coefficient of 0.9781 ± 0.0047. Robustness of BEaST is demonstrated on all baseline ADNI data, resulting in a very low failure rate. The segmentation accuracy of the method is better than two widely used publicly available methods and recent state-of-the-art hybrid approaches. BEaST provides results comparable to a recent label fusion approach, while being 40 times faster and requiring a much smaller library of priors., Data collection and sharing for this project was funded by the Alzheimer's Disease Neuroimaging Initiative (ADNI) (National Institutes of Health Grant U01 AG024904). ADNI is funded by the National Institute on Aging, the National Institute of Biomedical Imaging and Bioengineering, and through generous contributions from the following: Abbott, AstraZeneca AB, Bayer Schering Pharma AG, Bristol-Myers Squibb, Eisai Global Clinical Development, Elan Corporation, Genentech, GE Healthcare, GlaxoSmithKline, Innogenetics, Johnson and Johnson, Eli Lilly and Co., Medpace, Inc., Merck and Co., Inc., Novartis AG, Pfizer Inc, F. Hoffman-La Roche, Schering-Plough, Synarc, Inc., as well as non-profit partners the Alzheimer's Association and Alzheimer's Drug Discovery Foundation, with participation from the U.S. Food and Drug Administration. Private sector contributions to ADNI are facilitated by the Foundation for the National Institutes of Health (www.fnih.org). The grantee organization is the Northern California Institute for Research and Education, and the study is coordinated by the Alzheimer's Disease Cooperative Study at the University of California, San Diego. ADNI data are disseminated by the Laboratory for Neuro Imaging at the University of California, Los Angeles. This research was also supported by NIH grants P30AG010129, K01 AG030514, and the Dana Foundation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cement equivalence factor evaluations for fluid catalytic cracking catalyst residue

  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Velazquez Rodriguez, Sergio
Fluid catalytic cracking catalyst residue (FC3R) is a waste material that can be used as a Portland cement replacement in pastes, mortars, and concrete. The flow table results show that FC3R is a water demanding addition; nevertheless, this effect can be compensated with the use of superplasticizers. The pozzolanic activity of FC3R was studied observing the mechanical strength evolution with time. Pastes and mortars with FC3R incorporated show higher mechanical strengths than control specimens, indicating the pozzolanic activity of the waste. Cement equivalence factor (k-factor) evaluations were carried out. The k-factor values for the FC3R pastes and mortars were always greater than one, indicating that in order to maintain the same compressive mechanical strength of the control specimen it is sufficient to replace cement with a smaller amount of catalyst residue, due to the high pozzolanic activity of FC3R. There is a strong agreement between the k-factor values obtained in pastes and mortars., This work was supported by Ministerio de Ciencia y Tecnologia, Spain (Project MAT 2001-2694).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On finite soluble groups in which Sylow permutability is a transitive relation

  • Ballester Bolinches, Adolfo
  • Esteban Romero, Ramón
A characterisation of finite soluble groups in which Sylow permutability is a transitive relation by means of subgroup embedding properties enjoyed by all the subgroups is proved in the paper. The key point is an extension of a subnormality criterion due to Wielandt.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ecological traits of fish assemblages from Mediterranean Europe and their responses to human disturbance

  • Ferrerira, T
  • Oliveira, J.
  • Caiola, N.
  • De Sostoa, A.
  • Casals, F.
  • Cortés, R.
  • Economou, A.
  • Zogaris, S.
  • García-Jalon, D.
  • Ilheú, M.
  • Pont, D.
  • Rogers, C.
  • Prenda, J.
  • Martinez-Capel, Francisco|||0000-0003-4991-0251
[EN] Mediterranean river systems are characterised by more diverse fish assemblages and regional ecological processes compared with the rest of Europe. A data set from Mediterranean France, Iberia and Greece ( 2000 sites) was used to describe the characteristics of fish assemblages, explore their responses to anthropogenic disturbance and analyse the implications for river quality assessment. There was a southwards decline in species richness per site, but endemicity and proportion of alien species increased. Sites in the eastern Mediterranean had higher endemicity, lower site richness and lower number of alien species than sites in western Mediterranean Europe. Assemblage composition differed between Mediterranean sub-regions, but was dominated by three major fish types: a salmonid fish type common throughout the study area and two cyprinid-dominated fish types (in some sub-regions, Salmo trutta L. is present but not numerically dominant), corresponding to a gradient in hydrological and temperature regimes. Metric responses to perturbation were compared with those found at the European (larger scale) and basin (smaller scale) levels. Overall metric response was weaker in this Mediterranean application. The best responses to human pressure were usually obtained with abundance-based metrics and included the contribution of naturalised alien species. Some widespread alien species contributed to the response to anthropogenic alteration (notably Cyprinus carpio L. and Lepomis gibbosus (L.))., We thank Stefan Schmutz and his team for the coordination of the European FAME project (financed by the European Union, contract no. EVT1-CT-2001- 00094); his encouragement and support made the development of the Mediterranean data set possible. We are also indebted to all people that have taken part in the data collection and graciously agreed to share their information.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On minimal non-supersoluble groups

  • Ballester Bolinches, Adolfo
  • Esteban Romero, Ramón
[EN] The aim of this paper is to classify the finite minimal non-p-supersoluble groups, p a prime number, in the p-soluble universe., Supported by Proyecto BFM2001-1667-C03-03 (MCyT) and FEDER (European Union)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On finite groups generated by strongly cosubnormal subgroups

  • Ballester Bolinches, Adolfo
  • Cossey, John
  • Esteban Romero, Ramón
[EN] Two subgroups A and B of a group G are cosubnormal if A and B are subnormal in their join <A,B> and are strongly cosubnormal if every subgroup of A is cosubnormal with every subgroup of B. We find necessary and sufficient conditions for A and B to be strongly cosubnormal in <A,B> and, if Z is the hypercentre of G=<A,B>, we show that A and B are strongly cosubnormal if and only if G/Z is the direct product of AZ/Z and BZ/Z. We also show that projectors and residuals for certain formations can easily be constructed in such a group. Two subgroups A and B of a group G are N-connected if every cyclic subgroup of A is cosubnormal with every cyclic subgroup of B (N denotes the class of nilpotent groups). Though the concepts of strong cosubnormality and N-connectedness are clearly closely related, we give an example to show that they are not equivalent. We note, however, that if G is the product of the N-connected subgroups A and B, then A and B are strongly cosubnormal., The first and the third authors have been supported by Proyecto BFM2001-1667-C03-03 from Ministerio de Ciencia y Tecnolog´ıa, Spain. The third author has been supported by a grant from the Program of Support of Research (Stays of Researchers in other academic institutions) of the Universitat Polit`ecnica de Val`encia. Part of this research has been carried out during a visit of the third author to the School of Mathematical Sciences of the Australian National University in Canberra (Australia), to whom he wants to express his gratitude for their kindness and financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On finite minimal non-nilpotent groups

  • Ballester Bolinches, Adolfo
  • Esteban Romero, Ramón
  • Robinson, Derek J. S.
[EN] A critical group for a class of groups X is a minimal non-X-group. The critical groups are determined for various classes of finite groups. As a consequence, a classification of the minimal non-nilpotent groups (also called Schmidt groups) is given, together with a complete proof of Gol¿fand¿s theorem on maximal Schmidt groups., This work was supported by Proyecto BFM2001-1667-C03-03 (MCyT) and FEDER (European Union).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A question from the Kourovka Notebook on formation products

  • Ballester Bolinches, Adolfo
  • Calvo Lopez, Clara
  • Esteban Romero, Ramón
[EN] It is shown in this paper that if X is a class of simple groups such that pi(X) = char X, the X-saturated formation H generated by a finite group cannot be expressed as the Gaschütz product F o G of two non-X-saturated formations if H = G. It answers some open questions on products of formations. The relation between omega-saturated and X-saturated formations is also discussed., Supported by Proyecto BFMS001-1667-C03-0S, MCyT (Spain) and FEDER (European Union).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synergy Between Spin Crossover and Metallophilicity in Triple Interpenetrated 3D Nets with the NbO Structure Type

  • Galet, A.
  • Niel, V.
  • Real, J. A.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] Self-assembly of [Ag(CN)2]-, 3-cyanopyridine, and iron(II) gives triple interpenetration of three-dimensional spin crossover (SCO) networks with the NbO topology, which interact each other via argentophilic interactions. Superposition of the networks along the c-axis defines an infinite mosaic of trigonal and hexagonal cross-sectional tubes where water molecules are installed. The structural changes associated with the SCO tune the homoatomic interactions and induce an uncommon change of the lattice volume., We are grateful for the financial assistance from the Ministerio Español de Ciencia y Tecnología (project BQU 2001-2928). A.G. thanks the Universitat Politécnica de València for a predoctoral fellowship. We are grateful to Dr. A. E. Goeta for helpful discussions
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diastereoselective Michael addition of (S)-mandelic acid enolate to 2-arylidene-1,3-diketones: enantioselective diversity-oriented synthesis of densely substituted pyrazoles

  • Blay, Gonzalo
  • Fernández, Isabel
  • Molina, Eva
  • Pedro, Jose R.
  • Vila, Carlos
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] A diversity-oriented approach to enantiomerically pure densely substituted pyrazoles, ¿-aryl-¿-pyrazolylatrolactic acid and ¿-aryl-¿-pyrazolylacetophenones has been developed. The approach utilises the conjugated addition of the lithium enolate of the (2S,5S)-cis-1,3-dioxolan-4-one derived from optically active (S)-mandelic acid and pivalaldehyde to several 2-arylidene-1,3-diketones, which proceeds readily to give the corresponding Michael adducts in good yields and diastereoselectivities. The cyclocondensation of the 1,3-diketone moieties present in Michael adducts with several hydrazines leads to enantiomerically pure densely substituted pyrazoles. Subsequent basic hydrolysis of the dioxolanone moiety present in these products leads to enantiomerically pure ¿-aryl-¿-pyrazolylatrolactic acids. Finally, oxidative decarboxylation of these using oxygen, pivalaldehyde and the Co(III)¿Me2opba complex as catalyst gives ¿-aryl-¿-pyrazolylacetophenones. In this approach four points of diversity are introduced, one of them is the configuration of the (S)-mandelic acid, which acts as an umpoled chiral equivalent of the benzoyl anion., Financial supports from the Spanish Government MEC (BQU2001-3017) and from Generalitat Valenciana (Grupos 03/168 and GV05/10) are acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical properties of duplex stainless steel laser joints

  • Amigó, Vicente|||0000-0002-2107-0273
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Vicente-Escuder, Ángel|||0000-0001-8425-3424
  • Bonache Bezares, Victoria
[EN] This work presents the influence of welding parameters on the microstructural parameters and mechanical behaviour of welded joints. In doing so, we seek to establish the microstructural changes in the molten area and the heat affected zone, which will define the mechanical properties of the welded joints. This mechanical behaviour is evaluated by means of traction tests on welded test pieces and microhardness scanning of the heat affected zone., The authors would like to express their gratitude to the Asociación de Investigación de Óptica de la Comunidad Valenciana [Community of Valencia Optics Research Association] for the application of the laser welds and to the Spanish Ministry of Science and Technology for its support through Project MAT2001-1123-C03-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of artificial neural networks to high-throughput synthesis of zeolites

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Argente, Estefanía|||0000-0002-5431-3868
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Botti V.|||0000-0002-6507-2756
  • Serra, J. M.
[EN] It is shown that multi-phase crystalline systems in zeolite synthesis can be modelled by using artificial neural networks (ANNs) and considering as input variables the molar compositions of the starting synthesis gel. Experimental data were obtained using high-throughput tools for synthesis of solid materials under hydrothermal conditions and following a multi-level factorial experimental design of the system TEA: SiO2:Na2O:Al2O3:H2O. The study of several neural networks resulted in a non-linear model able to predict the occurrence and crystallinity of zeolite beta and competing phases, being the predictions much better than those obtained by classical quadratic models. (C) 2004 Elsevier Inc. All rights reserved., Financial support from Spanish government (MAT2003-07945-C02-01 and grants TIC2003-07369- C02-01, CICYT DPI2002-04434-C04-02, FPU AP2001- 1516) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis Fractal del Control Autonómico del Ritmo Cardiaco durante Oclusión Coronaria, Fractal analysis of the autonomic control of the heart rate during coronary occlusion

  • Gomis, Pedro
  • Caminal, Pere
  • Vallverdú, Montserrat
  • Wagner, G.
[ES] El sistema nervioso autónomo a través de sus ramas simpática (de excitación) y parasimpática (de inhibición) regula numerosas variables fisiológicas entre las que se encuentra el ritmo cardiaco. En este trabajo se analiza la respuesta del sistema de regulación del ritmo cardiaco durante isquemia transitoria de miocardio, utilizando características fractales de la señal R-R (que representa la duración entre dos latidos consecutivos -ondas R- en función del tiempo), obtenida de registros electrocardiogáficos. El modelo de isquemia se logró durante oclusión coronaria de más de 3 minutos en 50 pacientes. La complejidad del ritmo cardiaco es caracterizada por el comportamiento fractal dado por la pendiente β del escalado bilogarítmco de la densidad de potencia espectral de la señal R-R vs la frecuencia y por el índice α1 del análisis de fluctuaciones sin tendencias de la misma señal. Se encontraron valores de β más negativos durante oclusión coronaria y magnitudes de α1 diferentes dependiendo de la ubicación de la oclusión. Los resultados obtenidos pueden inferir que hay una pérdida de complejidad del sistema de control durante isquemia de miocardio., [EN] The autonomic nervous system through its sympathetic (excitation) and parasympathetic (inhibition) limbs regulates numerous physiological variables including the heart rate. In this work, the heart-rate regulation system response is analyzed during transitory myocardial ischemia, using fractal characteristics of R-R signal (represents duration between two consecutive beats -R waves- over time), obtained from electrocardiographic records. The ischemia model was obtained during coronary occlusion of more than 3 minutes in 50 patients. The complexity of the heart rate is characterized by the fractal behaviour given by the slope beta in bi-logarithmic scale of the power spectral density of R-R signal versus the frequency and by the alpha_1 index obtained from detrended fluctuation analysis of the same signal. More negative beta values during coronary occlusion and different alpha_1 magnitudes depending on the site of the occlusion were found. The obtained results can infer that there is a loss of complexity of the control system during myocardial ischemia., Este trabajo ha sido parcialmente financiado por la CICYT (TIC 2001-2167-C02-01) del Ministerio de Ciencia y Tecnología.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Composition of free and adherent ruminal bacteria: inaccuracyof the microbial nutrient supply estimates obtained using freebacteria as reference samples and 15N as the marker

  • González, J
  • Arroyo, J.M.
  • Ouarti, M
  • Guevara-González, J.
  • Rodríguez, C.A.
  • Alvir, M.R.
  • Moya, V.J.|||0000-0002-6769-0515
  • Piquer Querol, Olga
Previous studies have indicated that 15N enrichment of solid-associated bacteria (SAB) may be predicted from the same value in liquid-associated bacteria (LAB). The aims of this study were to confirm this and to measure the error in the nutrient supply from SAB, when LAB are used as the reference sample. For this purpose, the chemical and amino acid (AA) compositions of both the bacterial populations were studied in four experiments carried out on different groups of three rumen cannulated wethers. Diets (one in Experiments 1 and 4 and three in Experiments 2 and 3) had forage-to-concentrate ratios (dry matter (DM) basis) between 2 : 1 and 40 : 60, and were consumed at intake levels between 40 and 75 g DM/kg (BW) 0.75. The bacteria samples were isolated after continuous infusion of ( 15NH 4) 2SO 4 (40, 18, 30 and 25 mg 15N/day, in Experiments 1 to 4, respectively) for at least 14 days. In all experiments, SAB had consistently higher concentrations of organic matter (826 v. 716 g/kg DM, as average) and total lipids (192 v. 95 g/kg DM, as average) than LAB. Similar CP concentrations of both populations were observed, except a higher concentration in SAB than in LAB in Experiment 3. A consistent (in Experiment 4 only as tendency) higher AA-N/total N ratio (on average 17.5%) was observed in SAB than in LAB. The 15N enrichment in SAB was systematically lower than in LAB. On the basis of the results of all studies a close relationship was found between the 15N enrichment in SAB and LAB, which was shown irrespective of experiments. This relationship was established from Experiments 1 and 2 and the above cited previous results (n = 20; P < 0.001; R 2 = 0.996), and then confirmed from the results of Experiments 3 and 4. These relationships between SAB and LAB demonstrate that CP supply from SAB is underevaluated by, on average, 21.2% when LAB are used as the reference. This underevaluation was higher for true protein and even higher for the lipid supply (32.5% and 59.6%, respectively, as an average of the four experiments). Large differences in AA profile were observed between SAB and LAB. The prediction equation obtained using 15N as the marker may be used to correct the errors associated with the traditional use of LAB as the reference sample, and therefore to obtain more accurate estimates of the microbial nutrient supply to the ruminants. © Copyright The Animal Consortium 2011., Financial support was provided by the CICYT funded Projects AGL 2001-3662, AGL 2005-01712 and AGL 2006-08300. Analyses of 15N isotope ratios were performed at the Servicio Interdepartamental de Investigacio´ n, Universidad Auto´ noma de Madrid, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pozzolanic Reaction Rate of Fluid Catalytic Cracking Residue (FC3R) in Cement Pastes

  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Velázquez Rodríguez, Sergio
Fluid catalytic cracking catalyst residue (FC3R) is a waste material generated in the petroleum industry. Previous research has shown that FC3R exhibits excellent pozzolanic properties in Portland cement mixtures. The pozzolanic activity of FC3R was studied by means of thermogravimetric analysis (measurement of lime fixation) and cold hydrochloric acid treatment (quantification of FC3R reacted). A water/binder ratio of 0.40 was used in the study in the preparation of a control paste (without spent catalyst) and a 15% substituted FC3R paste. The selected curing temperatures were 20 and 408C and several curing times were tested. The amount (grammes) of fixed lime by gramme of reacted catalyst indicated that approximately one part lime is chemically combined with 2.3 parts of spent catalyst. The combination of both study techniques allows determination of the optimal dosage in order to maximise use of this excellent pozzolan., This work was supported by Ministerio de Ciencia y Tecnologia, Spain (Project MAT 2001-2694). Sergio Velazquez would like to thank the Consejo Nacional de Ciencia y Tecnologia (CONACYT-Mexico).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aplicación de Control Adaptativo a Modelo 2 GDL de Helicóptero, Application of adaptive control to 2dof helicopter model

  • Béjar, M.
  • Raimúndez, C.
[ES] Este artículo presenta la aplicación de una técnica de red neuronal adaptativa al control del modelo en 2 grados de libertad de un helicóptero. La técnica utiliza linealización por realimentación, compensación lineal y compensación con red neuronal adaptativa. El trabajo realizado muestra que un modelo simple del sistema es suficiente para la aplicación de la técnica, ya que la red neuronal compensa los errores del modelo completamente en línea y por tanto sin entrenamiento inicial., [EN] This paper presents adaptive control results obtained in the framework of CROMAT and COMETS projects. It is shown the application of the adaptive control technique developed by Calise to control a helicopter model with two degrees of freedom. The technique uses feedback linearization, linear compensation and adaptive-neural-network compensation. This work shows that a simple plant model is enough, since the neural network compensates modelling deviations completely on-line and therefore without initial training., Trabajo realizado en el marco de los Proyectos CROMAT (Programa Español de Investigación Nacional DPI2002-04401-C03-03) y COMETS (Programa Europeo IST 2001-34304).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal siting and sizing of electric taxi charging stations considering transportation and power system requirements

  • Clairand, Jean-Michel
  • González-Rodríguez, Mario
  • Kumar, Rajesh
  • Vyas, Shashank
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] Electric vehicles (EVs) have become more popular to address transportation-related environmental concerns. However, to integrate a massive fleet of EVs, it is crucial to properly build charging stations by considering the optimal geographical placement and number of charging spots. This task is particularly challenging for users with rigid schedules such as taxi drivers. Hence, an optimal siting and sizing approach for an electric taxi (ET) charging station is proposed in this study, considering both transportation and power system needs. In addition, particular attention to taxi drivers' needs is considered. Fixed installation costs, land costs, and trip costs are the factors evaluated in this proposed approach. A network modeling approach based on a winner-takes-all edge trimming was used to identify interest points of the city in terms of traffic flows. Ecuador's capital, Quito, was considered a case study. A sensitivity analysis was also carried out to address traffic flow uncertainties such as trip expenses and restrictions., This study belongs to the projects SIS.JCG.19.03 and IEA.JCG.20.01 from Universidad de las Americas - Ecuador. The authors would like to express their gratitude to Irvin Cedeno of BYD ~ E-Motors Ecuador for helpful information.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive multiresolution non-local means filter for 3D magnetic resonance image denoising

  • Coupé ., Pierrick
  • Robles Viejo, Monserrat
  • Collins ., Louis
  • Manjón Herrera, José Vicente|||0000-0001-6640-927X
In this study, an adaptive multiresolution version of the blockwise non-local (NL)-means filter is presented for three-dimensional (3D) magnetic resonance (MR) images. On the basis of an adaptive soft wavelet coefficient mixing, the proposed filter implicitly adapts the amount of denoising according to the spatial and frequency information contained in the image. Two versions of the filter are described for Gaussian and Rician noise. Quantitative validation was carried out on BrainWeb datasets by using several quality metrics. The results show that the proposed multiresolution filter obtained competitive performance compared with recently proposed Rician NL-means filters. Finally, qualitative experiments on anatomical and diffusion-weighted MR images show that the proposed filter efficiently removes noise while preserving fine structures in classical and very noisy cases. The impact of the proposed denoising method on fibre tracking is also presented on a HARDI dataset., The authors thank Ilana Leppert and Professor Bruce Pike for providing DW-MRI data and help in result analysis. They also thank Nicolas Guizard and Dr Vladimir Fonov for their help during tractography experiment. They thank Dr Luis Concha for his fruitful discussions about DTI processing. This work has been partially supported by the Canadian grant industry Cda (CECR)-Gevas-OE016 and by the Spanish Health Institute Carlos III through the RETICS Combiomed, RD07/0067/2001.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MIMO-GPCIT. Herramienta Interactiva de Control Predictivo Generalizado para Sistemas Multivariables con Restricciones

  • Guzmán, José Luis
  • Berenguel, Manuel
  • Dormido Bencomo, Sebastián
[ES] Este trabajo presenta una herramienta interactiva que permite estudiar el control de sistemas multivariables haciendo uso de la técnica GPC (Generalized Predictive Control). Con ella es posible especificar interactivamente el modelo de la planta a controlar en forma de matriz de transferencia, modificar los distintos parámetros de control (factores de ponderación, horizontes de control, horizontes de predicción, etc.) e incorporar restricciones sobre las salidas y entradas del sistema (tanto físicas como de comportamiento). De esta forma el usuario puede observar la interrelación entre las distintas variables y visualizar de manera inmediata cómo, al realizar un cambio sobre algún determinado parámetro, el comportamiento del sistema se ve modificado., Los autores quieren agradecer a la CICYT la financiación de este trabajo en el marco delos proyectos DPI2001-1012, DPI2001-2380-C02-02 y DPI-2002-04375-C03-03.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Construction and analysis of full-length and normalized cDNA libraries from citrus

  • Marques, M. Carmen
  • PEREZ AMADOR, MIGUEL ANGEL|||0000-0003-4518-3544
[EN] We have developed an integrated method to generate a normalized cDNA collection enriched in full-length and rare transcripts from citrus, using different species and multiple tissues and developmental stages. Interpretation of ever-increasing raw sequence information generated by modern genome sequencing technologies faces multiple challenges, such as gene function analysis and genome annotation. In this regard, the availability of full-length cDNA clones facilitates functional analysis of the corresponding genes enabling manipulation of their expression and the generation of a variety of tagged versions of the native protein. The development of full-length cDNA sequences has the power to improve the quality of genome annotation, as well as provide tools for functional characterization of genes, The authors would like to thank to all participants in the Spanish Citrus Functional Genomic Project, specially to Drs. Javier Forment, Jose Gadea, and Vicente Conejero. This work was funded by grants from the Spanish Government GEN2001-4885-CO5-01 and GEN2001-4885-CO5-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A charging station planning model considering electric bus aggregators

  • Clairand, Jean-Michel
  • González-Rodríguez, Mario
  • Cerdeño, Irvin
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] Many governments are pushing for cleaner transportation. In particular, public transportation allows massive transportation of passengers, but it remains highly polluting, especially in high elevation cities. Thus, the progressive introduction of electric buses (EBS) will allow mitigating these environmental concerns. However, some technological problems must be addressed considering the massive penetration of EBs. The lack of flexibility and the time connection of scheduling for public transit make EBS harder than internal combustion ones. This work studies the impact of charging EBs at the bus station and suggests a new way to take EB aggregators into account to reduce energy costs while fulfilling grid restrictions. In addition, to find a different number of charging spots to be installed, a scheduling analysis is conducted., This works belongs to the projects IEA.JCG.20.01 and SIS.MGR.21.01 from Universidad de las Americas - Ecuador. The authors would like to thank Paulo Guerra-Teran from Universidad de las Americas - Ecuador for the fruitful discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparison of robust polynomial fitting, global geopotential model and spectral analysis for regional–residual gravity field separation in the Doñana National Park (Spain)

  • Martín Furones, Ángel Esteban|||0000-0001-9379-0694
  • Gili, J.A.
  • Anquela Julián, Ana Belén|||0000-0001-6024-3790
  • Nuñez Andrés, M.A.
Doñana National Park is a protected area of approximately 500 km2 located on the SW coast of Spain with singular and interesting ecological and geological features. A gravimetric survey is presented where L&R gravity metres were used in the gravimetric observations with GPS and high-precision levelling positioning. Bouguer gravity anomalies were computed and least squares prediction was used for gross-error detection. Robust polynomial fitting, the recent EGM2008 global geopotential model (complete to degree and order 2159), and spectral analysis were tested for regional–residual gravity field separation. A detailed description of the gravimetric characteristics of the Doñana National Park is presented and the values of residual gravity anomalies were correlated with geological features, where the use of the EGM2008 global geopotential model has revealed an interesting tool for regional–residual gravity field separation. Finally, the interpretation of the results is justified by the well-known geological aspects of the park, but some modifications in the boundaries of the different geological features are needed in order to fit the modelled gravity with the residual gravity anomalies in the two cross-sections analysed., The studies presented here were part of CICYT (Spanish Research Directorate) research project nos. HID 97-0321 and REN2001-1293. We would like to thank all UPC members participating in these projects and the staff from the Biological Station of Donana (CSIC), Palacio de Donana and Donana National Park. We remain deeply grateful for the fruitful discussion with Dr. Salvany and for the geological review of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Blast2GO: a universal tool for annotation, visualization and analysis in functional genomics research

  • Conesa, Ana
  • Götz, Stefan
  • Terol, Javier
  • Talón, Manuel
  • Robles Viejo, Montserrat
  • Garcia-Gomez, Juan M
[EN] We present here Blast2GO (B2G), a research tool designed with the main purpose of enabling Gene Ontology (GO) based data mining on sequence data for which no GO annotation is yet available. B2G joints in one application GO annotation based on similarity searches with statistical analysis and highlighted visualization on directed acyclic graphs. This tool offers a suitable platform for functional genomics research in non-model species. B2G is an intuitive and interactive desktop application that allows monitoring and comprehension of the whole annotation and analysis process., The authors thank Dr Timothy Williams for fruitful discussions andcomments on the software and Nils Bluethgen for kindly providingthe Gossip software and supporting integration in B2G. This workhas been funded by MCyT (GEN 2001-4885-C05-03) and eTumourProject (FP6-2002-LIFESCIHEALTH 503094). The authors thankthe INBIOMED G03/160 research thematic network financed byFIS of the Instituto de Salud Carlos III.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of pozzolanic activity using methods based on the measurement of electrical conductivity of suspensions of portlnad cement and pozzolan

  • Velázquez Rodríguez, Sergio
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] The use of methods based on measuring electrical conductivity to assess pozzolanic activity has recently been used primarily in aqueous suspensions of pozzolan: calcium hydroxide. However, the use of similar methods in suspensions of cement with pozzolans has not been widely studied. This paper proposes a new method for rapid assessment of the pozzolanic activity of mineral admixtures in aqueous cement suspensions. In this study, the conditions for the application of the method were optimized, such as time, temperature, w/c ratio and dosage procedure. Finally, results are presented from the application of this method for characterizing the pozzolanic activity of the spent catalytic cracking catalyst. These results corroborate as previously reported, namely the high reactivity of this pozzolan obtained by other methods, such as thermogravimetry or evolution of the mechanical strength. In addition, the pozzolanic activity of the catalyst was compared with other pozzolans such as metakaolin and silica fume., This work was supported by Ministerio de Ciencia y Tecnologia, Spain (Project MAT 2001-2694). Sergio Velazquez would like to thank the Consejo Nacional de Ciencia y Tecnologia (CONACYT-Mexico).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synyhesis, structure, spectroscopy and redox chemistry of square-planar nickel(II) complexes with tetradentate o-phenylenedioxamidates and related ligands

  • Ottenwaelder, X.
  • Aukauloo, A.
  • Journaux, Y.
  • Carrasco, R.
  • Cano, J.
  • Cervera, B.
  • Castro, I.
  • Cureli, S.
  • Roselló, A. L.
  • Soto, B.
  • Ruiz-García, R.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] A series of four-coordinate square-planar nickel(II) complexes of o-phenylenebis(N¿-methyloxamidate) (L1) and related o-phenylene(N¿-methyloxamidate)oxamate (L2) and o-phenylenebis(oxamate) (L3) tetradentate ligands have been synthesized and characterized structurally, spectroscopically and electrochemically. The parent nickel(II)¿L1 complex presents an intense MLCT band in the UV region (¿max = 357 nm) and a distinctive 1 s ¿ 4p CT satellite in the Ni K-edge XANES spectrum (E = 8339.2 eV). These features together with the short Ni¿N(amidate) bond lengths (1.85¿1.93 Å) as revealed by the analysis of the Ni K-edge EXAFS spectrum and confirmed by single-crystal X-ray diffraction are typical of square-planar low spin (S = 0) NiII ions. The dianionic nickel(II) complexes, [NiIILi]2¿ (i = 1¿3), experience two redox processes in acetonitrile at 25 °C. The first redox process, at moderately low potentials (E1 = 0.12¿0.52 V vs. SCE), is a reversible one-electron metal-centered oxidation to the corresponding monoanionic nickel(III) complexes, [NiIIILi]¿. The second redox process, at relatively high potentials (E2 = 0.86¿1.04 V vs. SCE), is a quasireversible to irreversible one-electron oxidation largely centered on the o-benzenediamidate fragment of the non-innocent ligand, yielding the corresponding neutral nickel(III) complexes with a o-benzosemiquinonediimine ¿-cation radical ligand, [NiIII(Li)¿+]. The singly and doubly oxidized species of the parent nickel(II)¿L1 complex have been prepared by chemical oxidation and characterized spectroscopically in acetonitrile at ¿40 °C. The stable singly oxidized nickel(III)¿L1 species presents an intense LMCT band in the NIR region (¿max = 910 nm) and a rhombic X-band EPR spectrum (g1 = 2.193, g2 = 2.080 and g3 = 2.006) characteristic of square-planar low spin (S = 1/2) NiIII ions. The unstable double oxidized nickel(III)¿L1 ¿-cation radical species exhibits a rather intense visible band (¿max = 645 nm) that is tentatively assigned as a MLCT transition from the NiIII-benzosemiquinone type ground state to the NiIV excited state., This work was supported by the Ministerio de Ciencia y Tecnología (MCYT) (Spain) through the Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica (I + D + I) (BQU2001 2928) and the Ramón y Cajal programs. Further support from the European Community through the Human Potential Program Access to research infrastructures (Project CC005 97) is also acknowledged. B. S. thanks the Universitat de Valencia for a grant through the Una Nau de Solidaritat program. We are specially thankful to Dr I. Fernandez (Universitat de València) and Dr F. Villain (Universite Pierre et Marie Curie) for their assistance with the NMR and X-ray absorption measurements, respectively, and to Dr R. Pratt and Prof. T. D. P. Stack (Stanford University) for providing the thianthrenyl salt and access to low-temperature UV/VIS/NIR equipment, respectively
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High strength mortars using ordinary Portland cement-fly ash-fluid catalytic cracking ctalyst residue ternary system (OPC/FA/FCC)

  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
The use of ternary systems composed of ordinary Portland cement (OPC) and two pozzolanic mineral admixtures could supply several advantages in terms of the properties in both fresh and hardened states. Fly ash (FA) and spent fluid catalytic cracking catalyst (FCC) were combined to produce high strength mortars due to a synergic effect. OPC/FA systems (70%/30%) and OPC/FA/FCC systems (70%/20%/10%) were analyzed by thermogravimetric and SEM techniques. Mortars with different binder/sand ratios were prepared in order to yield high compressive strength values. On the one hand, fly ash particles act as nucleation sites that favour the hydration of Portland cement particles: at early stages (7 days), the calculated fixed hydrated lime values were negative, suggestive of a nucleating effect. For a longer curing period (90 days), the pozzolanic effect develops, as can be noted in terms of its compressive strength behaviour. The 90-days curing strength for OPC/FA mortars ranged between 96 and 98 MPa. In ternary mixtures (OPC/FA/FCC), FCC act as pozzolan during the initial 7 days period; the presence of fly ash particles favoured the presence of more portlandite by means of the nucleation effect. For longer curing times, fly ash particles also contribute to strength development, producing a synergic effect with FCC. The 90 days curing strength for OPC/FA/FCC mortars ranged between 103 and 106 MPa. Binary and ternary mortars reached strength activity index values equal or igher to the unit. Contributions to the strength (i.e. hydration of cement, the nucleation effect, and early and long term pozzolanic effects) have been calculated for 7 and 90 curing days pozzolan-containing mortars., This work was supported by Ministerio de Ciencia y Tecnologia, Spain (Project MAT 2001-2694). Thanks are given to the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Process mining for individualised behaviour modeling using wireless tracking in nursing homes

  • Fernández Llatas, Carlos|||0000-0002-2819-5597
  • Garcia-Gomez, Juan M
  • Traver Salcedo, Vicente|||0000-0003-1806-8575
  • Benedí Ruiz, José Miguel
The analysis of human behavior patterns is increasingly used for several research fields. The individualized modeling of behavior using classical techniques requires too much time and resources to be effective. A possible solution would be the use of pattern recognition techniques to automatically infer models to allow experts to understand individual behavior. However, traditional pattern recognition algorithms infer models that are not readily understood by human experts. This limits the capacity to benefit from the inferred models. Process mining technologies can infer models as workflows, specifically designed to be understood by experts, enabling them to detect specific behavior patterns in users. In this paper, the eMotiva process mining algorithms are presented. These algorithms filter, infer and visualize workflows. The workflows are inferred from the samples produced by an indoor location system that stores the location of a resident in a nursing home. The visualization tool is able to compare and highlight behavior patterns in order to facilitate expert understanding of human behavior. This tool was tested with nine real users that were monitored for a 25-week period. The results achieved suggest that the behavior of users is continuously evolving and changing and that this change can be measured, allowing for behavioral change detection, The authors want to acknowledge the Spanish Government, the eMotiva Project (TSI-020110-2009-219) partners, Health Institute Carlos III through the RETICSCombiomed (RD07/0067/2001) and Programa Torres Quevedo from Ministerio de Educacion y Ciencia, co-founded by the European Social Fund (PTQ05-02-03386), for their support and the professionals and residents of Centro Residencial San Sebastian en la Pobla De Vallbona and MySphera Enterprise for their active participation in the project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

PSO Tuning of a Second Order Sliding Mode Controller to Adjust Active Standard Power Levels on a Single-Phase Voltage Source Inverter

  • Gonzales-Zurita, Oscar
  • Clairand, Jean-Michel
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] Electricity management in non-conventional energy systems requires advanced control algorithms to produce and distribute electricity efficiently. Various countries worldwide have promoted policies to manage electricity from power inverters under typical voltage, current, and power values. This paper proposes a DQ control for active power regulation on a single-phase voltage source inverter (SPVSI) using a Second Order Sliding Mode Control (SMC-2). The SMC-2 tunning is performed by a metaheuristics algorithm like the Particle Swarm Optimization (PSO) to adjust the SMC-2 parameters. PSO appropriately tuns the SMC-2 through MATLAB, where the results showed lower Integral of Absolute Error value (IAE) and Integral of Square Error value (ISE) as performance indexes., This paper belongs to the project IEA.JCG.20.01 from Universidad de las Americas-Ecuador
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemistry and reactivity of dinuclear iron oxamate complexes: alkane oxidation with hydrogen peroxide catalysed by an oxo-bridged diiron(III) complex with amide and carboxylate ligation

  • Pardo, E.
  • Lloret, F.
  • Carrasco, R.
  • Temporal-Sánchez, T.
  • Ruiz-García, R.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] A new dinuclear iron(III) complex with the tetradentate ligand N,N'-o-phenylenebis(oxamate) (opba) has been synthesised, and structurally, magnetically and electrochemically characterised. It possesses an unprecedented triply bridged Fe-2(mu-O)(mu-RCO2...H2O...O2CR)(2) core, whereby two N-amides from the opba ligand complete the square-pyramidal coordination sphere of the O-carboxylate rich iron site (Fe-N = 2.053 Angstrom and Fe-O = 2.015 Angstrom), The antiferromagnetic exchange interaction between the two high-spin Fe-III ions through the oxo bridge (J = -190 cm(-1); H = -JS(1)(.)S(2)) is weaker than that found in related mu-oxo singly bridged diiron(III) complexes. The lessened antiferromagnetic coupling correlates to the remarkably long Fe-O distance (R = 1.808 Angstrom), which is associated to the relatively bent Fe-O-Fe angle (alpha = 131.8degrees) in the Fe2O unit. It experiences an irreversible one-electron oxidation process in acetonitrile at 25degreesC (E = 0.63 V versus SCE) to give the putative mixed-valent diiron(III, IV) species which is unstable under the experimental conditions. The reactivity of this unique oxo-bridged diiron(III) oxamate complex toward hydrogen peroxide activation and hydrocarbon oxidation in the presence of dioxygen has been examined. It catalyses the oxidation of alkanes like cyclohexane and adamantane to the corresponding alcohols and ketones by H2O2 and O-2 in acetonitrile at room temperature with limited catalytic activities (total yields of ca. 5% after 24 h) and modest selectivities (A/K = 0.9, KIE = 2.4, tert/sec = 3.0). Overall, these results are more in line with a mechanism involving alkyl radicals as transient intermediates, although they do not exclude the possibility that a metal-based active oxidant is also involved in this C-H bond oxidation chemistry., This work was supported by the Ministerio de Ciencia y Tecnolog&#305;&#769;a (MCYT) (Spain) through the Plan Nacional de Investigación Cient&#305;&#769;fica, Desarrollo e Innovación Tecnológica (I + D + I) (BQU2001 2928) and the Ramón y Cajal programme. Further support from the Oficina de Ciencia i Tecnolog&#305;&#769;a de la Generalitat Valenciana (Spain) through the Plan Valenciano de Investigación Cient&#305;&#769;fica, Desarrollo Tecnológico e Innovación (PVIDI) (CTIDIA2002 131) is also acknowledged. E.P. thanks the Ministerio de Educación, Cultura y Deporte (Spain) for a FPU grant. We are specially thankful to Dr. E. Anxolabèhere-Mallart for the assistance with the electrochemical measurements and Dr. J. Cano for very stimulating talks and unselfish help during the realisation of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identification of ovule and seed genes from Citrus clementina

  • García Lor, Andrés
  • Garcia Martinez, Jose L
  • PEREZ AMADOR, MIGUEL ANGEL|||0000-0003-4518-3544
[EN] Seedlessness is a highly desirable trait in fresh fruit. Citrus varieties, such as Clementine mandarin and other related species, show parthenocarpic fruit development without seeds due to self-incompatibility. In spite of that, these fruits frequently contain seeds as a result of cross-pollination by insects with compatible pollen from other citrus cultivars grown nearby. To solve this problem using a biotechnological approach we aim at the destruction of ovules and/or seeds by directing the expression of a toxic gene using the promoter of an ovule and/or seed specific gene. With the purpose of isolating this kind of genes we constructed two cDNA libraries from ovules and seeds at different developmental stages of the Clementine mandarin (Citrus clementina cv. Clemenules). A total of 1,014 ESTs from the ovule library and 1,042 ESTs from the seed library were generated, with a novelty percentage of 27% and 36% among the Spanish Citrus Functional Genomic Project (CFGP) ESTs database, respectively. Quantitative PCR analysis confirmed nearly specific expression in ovule and/or seed of two genes, TRANSPARENT TESTA16 (CcTT16) and TRANSPARENT TESTA7 (CcTT7). Expression of these two genes is restricted to early seed development, and is localized in the embryo sac and endothelium. The promoters of those genes may be useful to genetically engineer citrus species to avoid seed formation in fruits of commercial varieties., The authors thank Dr. L. Navarro and J. Juarez, from the Instituto Valenciano de Investigaciones Agrarias (Generalitat Valenciana), for the use of the Clementine orchard and Fortune pollen; Dr. J Forment and the Genomics Facility at the IBMCP for sequence analysis and maintenance of to the CFGP database; and Drs. F Tadeo and J Carbonell for critical reading of the manuscript. This work was supported by grants from the Conselleria de Agricultura, Pesca y Alimentacion (Generalitat Valenciana) and Spanish Ministerio de Ciencia y Tecnologia (research grant GEN2001-4885-C05). A.G-L. received a PhD fellowship from the Conselleria de Agricultura, Pesca y Alimentacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the pozzolanic activity of spent FCC catalyst/fly ash mixtures in Portland cement pastes

  • Velázquez Rodríguez, Sergio
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
High pozzolanic activity of the residue spent catalytic cracking catalyst (FCC) has been reported by various authors in recent years. However, no report on the lime fixation of this residue when dosed together with other pozzolan has been developed, such material partially replacing Portland cement in the manufacture of hydraulic binders. One of the possibilities is to mixture it with fly ash (FA). This joint replacement provides several advantages in that: 1) Generation of FCC is low compared to other pozzolans including fly ash (FA); 2) The FCC tends to react to short curing times, while the FA does at longer times; 3) The FCC is demanding water, while the FA tends to improve the fluidity of the binder. This paper studies on cement pastes by thermogravimetric analysis of various mixed substitutions FCC:FA, varying the replacing percentage for FCC in the 0-15% range and for FA in the 0-30% range. Evolution of pastes was monitored by means of thermogravimetric analysis on pastes cured for 3-365 days. Products of the pozzolanic reaction were identified by SEM, being some of them cubic crystals (C3AH6 and/or hydrogarnet). By TGA analysis it was observed that when the %FCC is increased in the system, the amount of the calcium aluminate hydrates (C-A-H) and calcium aluminosilicate hydrates (C-A-S-H) also increased. Negative values of fixed lime were obtained due to an acceleration of the hydration of OPC, since the FA particles acted as nucleation sites for the precipitation of hydrated compounds. Fixed rates up to 90% of hydrated lime with substitutions as high as 45% in Portland cement system at one year of curing were reached. (C) 2016 Elsevier B.V. All rights reserved., This work was supported by Ministerio de Ciencia y Tecnologia, Spain (Project MAT 2001-2694).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A study of the carcass traits of different rabbit genotypes

  • Metzger, Sz.
  • Odermatt, M.
  • Szendro, ZS.
  • Mohaupt, M.
  • Romvári, R.
  • Makai, A.
  • Biró-Németh, E.
  • Sipos, L.
  • Radnai, I.
  • Horn, P.
[EN] The aim of this experiment was to study the carcass traits of rabbits when the same maternal stocks were mated with bucks of two well-known hybrids selected for growth traits or with Pannon White bucks selected for carcass traits by CT (computerised tomography). Three experiments were carried out at the same time. Experiment 1: Pannon White (P) or Hycole terminal (H) males were crossed with Pannon White (P) does (n=PP: 60, HP:59). Experiment 2: Pannon White (P), Hycole terminal (H) or Zika terminal (Z) bucks were crossed with Hycole (H) parent does (n=PH: 60, HH:52 and ZH:58). Experiment 3: Pannon White (P) or Zika terminal (Z) males were crossed with a Maternal line (M) stock (n=PM: 60, ZM:58). In all the experiments, hybrid males increased their body weight. Mating the same maternal stock with hybrid or Pannon White bucks, the body weight of the offspring of hybrid males was higher than that of the offspring of Pannon White bucks (Experiment 1: PP and HP:2644 and 2758 g, P<0.001; Experiment 2: PH, HH and ZH:2611, 2671 and 2890g, P<0.001; Experiment 3: PM and ZM:2534 and 2677 g, P<0.001). The most important carcass traits differences were found in rabbits originated from Pannon White males. Genetic origin influenced the dressing out percentage, which was 0.5% higher in PP rabbits compared to the HP group in Experiment 1 (60.6 and 60.1%, resp.; P=0.092); 1% higher in PH and ZH genotypes compared to HH animals in Experiment 2 (in PH, ZH and HH:59.6, 59.7 and 58.7%; P=0.008), and 1.5% higher in PM than in ZM rabbits in Experiment 3 (61.0 and 59.5%, resp.; P<0.001). The ratio of the m. Longissimus dorsi to reference carcass weight was also higher in rabbits derived from P males in Experiments 2 and 3 (Experiment 2: PH:11.2, HH:10.8, ZH:10.5%, P<0.001; Experiment 3: PM:11.5, ZM:10.6%, P<0.001), while it did not differ in Experiment 1. Significant difference in fat deposit was found only in Experiment 3, progeny of Pannon White males had higher weight (22.3 vs. 16.6g, P=0.002) and ratio of perirenal fat (1.65 vs. 1.25%, P=0.003) compared to offspring of Z males. Results of the dressing out percentage and the ratio of m. Longissimus dorsi proved that the selection based on CT (Pannon White genotype) was successful., The authors wish to acknowledge the support received from the NKFP 4/034/2001 Project
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accurate consideration of metal losses at waveguide junctions using admittance and impedance integral equation formulations

  • Taroncher Calduch, Mariam|||0000-0001-9068-1169
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Hueso, J.
  • Gimeno. B.
  • Gugliemi, M.
[EN] At higher frequencies, metal loss effects in passive waveguide components become more pronounced and hazardous. In this paper, we propose two integral equation techniques, based on the generalized admittance and impedance matrices, for the accurate consideration of losses in the metal walls of waveguide junctions. Both techniques have been evaluated in terms of accuracy and numerical efficiency, and conclusions are drawn regarding the best properties of the admittance parameter formulation. Finally, combining such technique with a classical perturbative method for considering propagation losses, we have successfully predicted all loss effects in two real waveguide filters used for commercial applications., This work has been supported by research projects TIC2000-0591-C03-01 and TIC2000-0591-C03-03 and special action ESP2001-4547-PE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of high-resolution thermogravimetric analysis (HRTG) technique in spent FCC catalyst/Portland cement pastes

  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Bonilla Salvador, María Mercedes
Thermogravimetric analysis is one of the most common instrumental techniques used for the characterization of pastes, mortars and concretes based on both calcium hydroxide and Portland cement. Important information about pozzolanic materials can be assessed concerning calcium hydroxide consumption and the formation of new hydrated products. Nevertheless, in some cases, problems associated with the overlapped decomposition processes for hydrates make the analysis of obtained data difficult. In this paper, the use of high-resolution thermogravimetric analysis, a powerful technique that allows separating decomposition processes in analysis of hydrated binders, was performed for spent FCC catalyst Portland cement pastes. These pastes were monitored for 1, 4, 8 h and 1, 2, 3, 7 and 28 curing days. In order to study the influence of the pozzolanic material (spent FCC catalyst), Portland cement replacements of 5, 15 and 30 % by mass were carried out. The presence of spent FCC catalyst in blended pastes modified the amount and the nature of the formed hydrates, mainly ettringite and stratlingite., This work was supported by the Ministry of Science and Technology, Spain (Project MAT 2001-2694).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of the lowest singlet and triplet states of S-Flurbiprofen

  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Tormos Faus, Rosa Esperanza
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Miranda Alonso, Miguel Ángel
[EN] The photophysical properties of S-flurbiprofen [S-2-fluoro-alpha-methyl-4-biphenylacetic acid], a nonsteroidal anti-inflammatory drug, have been examined using steady-state and time-resolved spectroscopic techniques. The energy of its first singlet excited state is 99 kcal mol(-1). The fluorescence quantum yields and lifetimes (at 300 nm) have been determined in acetonitrile, methanol, hexane and PBS; they are in the range 0.15 < &phi;(F) < 0.33 and 0.7 < &tau;(F) < 2.0 ns. The intersystem crossing quantum yields are between 0.45 and 0.71; the lambda(max) of the T-T absorption is 360 nm, and the triplets live from 15 to 106 mus. Steady state photolysis in aqueous medium leads to S-2-hydroxy-alpha-methyl-4-biphenylacetic acid via photonucleophilic aromatic substitution, in addition to the photodecarboxylation products observed in organic solvents., Financial support from the MCYT (BQU2001-2725), the Generalitat Valenciana (Grupos03/82 and GV04B/468) and the U.P.V. (Project 2003-0522) is gratefully acknowledged. I. V. thanks Fundación José y Ana Royo for a fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new sliding mode control strategy to improve active power management in a laboratory scale microgrid

  • Gonzales-Zurita, Oscar
  • Clairand, Jean-Michel
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] In recent years, the widespread use of single-phase voltage source inverters (SPVSIs) has led to significant challenges in managing microgrids' electrical energy, particularly regarding efficiency and robustness. Most SPVSIs on the market use proportional¿integral (PI) control for their closed-loop regulation process. Although the PI controller represents an effective method for power management in a microgrid, it exhibits challenges in achieving proper system response and stability for active power generation. This study proposes a robust control solution based on the second-order sliding mode control (SMC-2) algorithm to overcome the mentioned challenges. This algorithm employed a non-conventional sliding surface to improve the microgrid's capacities for energy management. The research was conducted in a PSCAD environment, where a real industrial SPVSI with PI control was emulated and then optimized using the SMC-2. The employed tuning method was the particle swarm optimization (PSO) technique. This method ensures global optimum optimization of the SMC-2 control parameters. Different operating scenarios were performed to demonstrate the superiority of SMC-2 over PI. The SMC-2 achieved in less time than PI, active power references over a range of 0 to 1000 W, and obtained lower performance indices based on reference tracking error. The microgrid under study is located at Universitat Politècnica de València., This paper is part of the project IEA.JCG.20.01, which belongs to Universidad de las Americas-Ecuador, and is part of the Project TED2021-130464B-I00 (INASOLAR) , funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR directed by Ph.D. Guillermo Escriva-Escriva.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spatial and temporal patterns of water quality in Cullera Bay

  • Falco, S.|||0000-0002-8679-9153
  • Romero, Inmaculada|||0000-0001-7876-9328
  • Martínez-Guijarro, Mª Remedios|||0000-0002-3934-4615
  • Hermosilla Gómez, Zuriñe
  • Sierra, J.P.
  • Mösso, C.
  • Mestres, M.
[EN] The Júcar River, characterized by a very irregular freshwater flow, discharges into the Spanish Mediterranean coastal waters. However, the flow at its mouth is usually insignificant due to the overexploitation of upstream water. Under normal conditions, the final stretch of the river (downstream from the Cullera weir) is nurtured only by water released from the weir and small discharges from lateral irrigation channels. During periods of heavy rain, however, a significant amount of water flows through the Cullera weir. An analysis of data acquired during several field campaigns in Cullera Bay clearly reveals a zonal distribution of nutrients and chlorophyll-a within the bay: a southern area of continental influence, located near the mouth of the Júcar River; a region affected by karst filtrations and minor freshwater inputs, located to the north of the bay around Cullera Cape; and a third zone in between, characterized by higher salinities. Spatial salinity distribution is indicative of the spatial distribution of some of the nutrients discharged by the river, particularly nitrite, nitrate, orthosilicic acid and total phosphorus (TP), since it has been shown that their behavior is inverse to that of salinity. However, neither soluble reactive phosphorus (SRP) nor ammonium, which are mainly affected by biological activity, show this type of behavior. Five different conditions/scenarios were identified during the overall sampling period based on the time-series analysis of wind parameters, rainfall, freshwater flow, salt-wedge thickness at the measuring station on the river, and by comparing the average surface salinity at the sea stations with the values obtained at the coastal stations., This study was financed by the European Union as a part of the ECOSUD project ("Estuaries and Coastal Areas. Basis and Tools for a More Sustainable Development". Reference no. ICA4-CT-2001-10027), AQUAS project ("Water quality and sustainable aquaculture. Links and implications". Reference no. INCO-CT-2005-015105) and by a Special Action by the Spanish Science and Technology Ministry, "Bases y herramientas para el desarrollo sostenible de zonas costeras y estuarinas" (Reference no. REN2001-5510-E).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A numerical methodology to assess the quality of the design velocity field computation methods in shape sensitivity analysis

  • Ródenas, Juan José|||0000-0003-2195-7920
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
[EN] The velocity field in shape sensitivity analysis is not uniquely defined although it must meet numerous theoretical and practical criteria. These practical criteria can be used to compare the existing velocity field computation methods which meet the theoretical criteria, but only in qualitative terms. When the FEM is used in design sensitivity analysis (DSA), due to the FE discretization error, the DSA errors will depend on the design velocity field considered. This paper presents a numerical methodology for quality evaluation of design velocity field computation methods in quantitative terms based on the analysis of the DSA discretization error. The sensitivity of the squared energy norm (chi(m) = partial derivativeparallel touparallel to(2)/partial derivativea(m), a(m) being a design variable) has been taken as the magnitude to measure the error of the DSA. For h-refinements, the squared error in energy norm (parallel toe(u)parallel to(2)) and the error in chi(m)(e(chi(m))) are theoretically related by a constant which is independent of the refinement degree of the FE model. The quality of the design velocity field computation methods can therefore be assessed in terms of the stability of e(chi(m))/parallel toe(u)parallel to(2) in sequences of meshes. An example of the use of this methodology, where six design velocity field computation methods are compared, is presented., This work was financially supported by Ministerio de Ciencia y Tecnología within the framework of research project DPI2001-2400-C02-02
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A CANDLE for a deeper in-vivo insight

  • Coupé, Pierrick
  • Munz, Martin
  • Ruthazer, Edward S.
  • Collins, D. Louis
  • Manjón Herrera, José Vicente|||0000-0001-6640-927X
A new Collaborative Approach for eNhanced Denoising under Low-light Excitation (CANDLE) is introduced for the processing of 3D laser scanning multiphoton microscopy images. CANDLE is designed to be robust for low signal-to-noise ratio (SNR) conditions typically encountered when imaging deep in scattering biological specimens. Based on an optimized non-local means filter involving the comparison of filtered patches, CANDLE locally adapts the amount of smoothing in order to deal with the noise inhomogeneity inherent to laser scanning fluorescence microscopy images. An extensive validation on synthetic data, images acquired on microspheres and in vivo images is presented. These experiments show that the CANDLE filter obtained competitive results compared to a state-of-the-art method and a locally adaptive optimized non-local means filter, especially under low SNR conditions (PSNR < 8 dB). Finally, the deeper imaging capabilities enabled by the proposed filter are demonstrated on deep tissue in vivo images of neurons and fine axonal processes in the Xenopus tadpole brain., We want to thank Florian Luisier for providing free plugin of his PureDenoise filter. We also want to thank Markku Makitalo for providing the code of their OVST. This study was supported by the Canadian Institutes of Health Research (CIHR, MOP-84360 to DLC and MOP-77567 to ESR) and Cda (CECR)-Gevas-OE016. MM holds a fellowship from the Deutscher Akademischer Austasch Dienst (DAAD) and a McGill Principal's Award. ESR is a tier 2 Canada Research Chair. This work has been partially supported by the Spanish Health Institute Carlos III through the RETICS Combiomed, RD07/0067/2001. This work benefited from the use of ImageJ.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Mejora genética para la resistencia a los geminivirus tomato yellow leaf curl virus (TYLCV) y tomato yellow leaf curl sardinia virus (TYLCSV) en tomate

  • Pérez De Castro, Ana María|||0000-0002-4949-3323
[EN] Tomato yellow leaf curl disease (TYLCD) causes great damage in tomato (Solanum lycopersicum L.) crops in south-eastern Spain and in many tropical and subtropical areas in the world. The disease is caused by a complex of viruses, all belonging to the genus Begomovirus, family Geminiviridae. Nine species have been reported causing TYLCD and six more have been proposed as tentative species. Four viral species associated with TYLCD are present in Spain. Preventive measures to fight the disease, as well as measures based on controlling the insect vector (Bemisia tabaci Gen.) are not effective, so the development of resistant varieties seems the best long term strategy. Given that resistance has not been reported in the cultivated species, screening for resistance has been focused on wild tomato relatives. Resistance has been found in different wild species and some resistant breeding lines and commercial varieties have been developed. Ty-1, derived from S. chilense LA1969, is the most frequently used gene. Advances in genetic engineering techniques have also been exploited in developing plant material with pathogen derived resistance. However, resistant varieties currently available are not a solution, as with high inoculum pressure conditions and early infections, plants still develop symptoms and yield losses are caused. For that reason, many research groups continue working worldwide to obtain plants with high levels of resistance to TYLCD. Current breeding objectives are the development of broad spectrum resistance to several begomovirus, the accumulation of resistance genes from different sources to increase the levels of resistance and the identification of molecular markers tightly linked to resistance genes, which allows shortening breeding programmes and accumulating different resistance genes in the same plant material. This work has been developed in the research group ‘Breeding for resistance to Tomato yellow leaf curl disease’ of the Institute for Conservation and Improvement of Agrodiversity (COMAV). When this project was initiated, several resistant plant materials had been developed from previous works of the group. Twelve breeding lines derived from S. chilense LA1932 and LA1938 were available. These lines were resistant to Tomato yellow leaf curl Sardinia virus (TYLCSV), the first viral species described in Spain causing TYLCD. It was of interest the evaluation of resistance in these lines to Tomato yellow leaf curl virus (TYLCV), introduced later in Spain and spread worldwide. Six breeding lines showed high levels of partial resistance to TYLCSV and TYLCV. The resistance consisted on attenuation and delay in symptom development, as well as reduction in viral accumulation. Significant yield losses due to viral infection were not observed in these lines. These lines also show good horticultural traits which make them appropriate to be base material for developing commercial hybrids resistant to both, TYLCSV and TYLCV. High levels of resistance have also been identified in S. pimpinellifolium UPV16991. The resistance has already been fixed in the genetic background of S. lycopersicum. It was convenient to determine the genetic control of the resistance and the expression in tomato background, before using it in breeding programmes. For these purposes L102 was selected. L102 belongs to the F6 generation, after the initial cross S. lycopersicum NE-1 x S. pimpinellifolium UPV16991. Resistance to TYLCV in L102 is controlled by one gene, with partial recessiveness and incomplete penetrance. Moreover, the expression of resistance strongly depends on S. lycopersicum background in which it is introgressed. The highest levels of resistance are obtained when crossing L102 with vigorous lines. So, we recommend to use UPV16991-derived resistance in the development of vigorous hybrids in homozygosis or combined with resistance from other sources. To exploit resistance derived from UPV16991, L102 and some other lines with the same origin were crossed with a breeding line homozygous for Ty-1. Resistance was then evaluated in several plant material heterozygous for both, Ty-1 and the resistance gene from UPV16991. These plant materials showed higher levels of resistance than heterozygotes for each of the genes. Resistance in one of the hybrids was even higher than in homozygotes for each of the genes. These results show that combining resistance from UPV16991 with Ty-1 is the most practical approach to exploiting this resistance, since it allows the development of hybrids without the need of fixing the resistance gene in both parents. Finally, availability of molecular markers tightly linked to the resistance genes is essential to accumulate resistance from different sources. Some molecular markers tightly linked to Ty-1 have been reported. However, in all cases, S. peruvianum-derived Mi gene interferes with these markers, causing false positive results. In this work, a molecular marker, JB-1, tightly linked to Ty-1 has been identified. This is a CAPS (Cleaved Amplified Polymorphic DNA) marker. The presence of Mi, as well as introgressions from other wild tomato relatives such as S. lycopersicum (formerly Lycopersicon esculentum var. cerasiforme), S. habrochaites and S. pimpinellifolium do not interfere with the results for this marker. In addition, the analysis of several plant material with introgressions from different wild tomato relatives has allowed the location of CT21, the RFLP (Restriction Fragment Length Polymorphism) marker from which JB-1 was designed., [ES] La enfermedad del rizado amarillo del tomate (Tomato yellow leaf curl disease, TYLCD) causa graves daños en los cultivos de tomate (Solanum lycopersicum L.) del sudeste español y de la mayor parte de las zonas tropicales y subtropicales de todo el mundo. La enfermedad está causada por un complejo de virus pertenecientes al género Begomovirus, familia Geminiviridae. Se han descrito nueve especies causantes de TYLCD y otras seis han sido propuestas. En España están presentes cuatro de las especies virales asociadas a TYLCD. Las medidas preventivas de lucha contra la enfermedad, así como las basadas en el control del insecto vector transmisor (Bemisia tabaci Gen.) no resultan efectivas por si mismas, de forma que el desarrollo de materiales resistentes supone la mejor estrategia de lucha a largo plazo. Dado que en la especie cultivada no se han descrito entradas resistentes, la búsqueda de fuentes de resistencia se ha centrado en las especies silvestres del género relacionadas con el tomate. Se ha encontrado resistencia en distintas entradas de algunas de estas especies y se han desarrollado líneas de mejora y materiales comerciales con resistencia procedente de algunas de ellas. El gen Ty-1, derivado de la entrada LA1969 de S. chilense, ha sido el más empleado para la obtención de líneas e híbridos comerciales resistentes. Por otra parte, haciendo uso de los avances en las técnicas de ingeniería genética, también se han desarrollado materiales con resistencia derivada del patógeno. Sin embargo, los materiales resistentes disponibles hasta el momento no suponen una solución definitiva al problema, ya que, con presiones fuertes de inóculo o infecciones tempranas, las plantas desarrollan síntomas de la enfermedad, produciéndose pérdidas de producción. Por este motivo, numerosos grupos de investigación continúan trabajando a nivel mundial con la finalidad de obtener materiales con niveles elevados de resistencia a TYLCD. Entre los objetivos actuales de mejora se incluyen el desarrollo de resistencia de amplio espectro a varios begomovirus, la combinación de genes de distinta procedencia para conseguir mayores niveles de resistencia y la identificación de marcadores moleculares ligados a los genes de resistencia que permitan acortar los programas de mejora y acumular en un mismo material genes de resistencia de distintas fuentes. El grupo de “Mejora para la resistencia a la enfermedad del rizado amarillo del tomate”, del Instituto de Conservación y Mejora de la Agrodiversidad Valenciana (COMAV), en el que se ha realizado la presente tesis doctoral, disponía al inicio de la misma de distintos materiales con resistencia a TYLCD, desarrollados en trabajos previos. Entre estos materiales se encontraban 12 líneas de mejora derivadas de la entradas LA1932 y LA1938 de S. chilense, seleccionadas por su resistencia a la especie Tomato yellow leaf curl Sardinia virus (TYLCSV), la primera especie viral causante de TYLCD detectada en España. Resultaba de interés evaluar la respuesta de estos materiales a la especie Tomato yellow leaf curl virus (TYLCV), introducida posteriormente en España y más extendida a nivel mundial. Seis de las líneas evaluadas han mostrado niveles elevados de resistencia parcial a TYLCSV y TYLCV, consistente en la atenuación en la manifestación de síntomas y retraso en el momento de aparición de los mismos, además de en la reducción de la acumulación viral. Además, no se han observado en estas líneas pérdidas significativas en el rendimiento como consecuencia de la infección por TYLCV. Las características agronómicas las hacen apropiadas como parentales para el desarrollo de híbridos con elevada resistencia a TYLCSV y TYLCV. Por otra parte, se habían identificado niveles elevados de resistencia en la entrada UPV16991 de S. pimpinellifolium. Una vez fijada la resistencia en el fondo genético de S. lycopersicum, y como paso previo al empleo en programas de mejora, era conveniente determinar el control genético de la misma, así como conocer su expresión en el fondo genético de la especie cultivada. Para ello se ha empleado la línea L102, que corresponde a la quinta generación de autofecundación a partir del cruce inicial S. lycopersicum NE-1 x S. pimpinellifolium UPV16991. Se ha comprobado que la resistencia parcial a TYLCV de la línea L102 está controlada por un gen con recesividad parcial y penetración incompleta. Además, la expresión de la misma depende considerablemente del fondo genético de S. lycopersicum en el que se introgresa, obteniéndose los mayores niveles de resistencia en cruces con líneas vigorosas. Por todo esto, se recomienda el uso de esta resistencia bien en homocigosis en el desarrollo de híbridos vigorosos, bien en combinación con resistencia procedente de otras fuentes. En este sentido, se decidió evaluar la resistencia en materiales que combinaban el gen Ty-1 y el gen derivado de UPV16991, ambos en heterocigosis. El nivel de resistencia en estos materiales ha sido superior al mostrado por los heterocigotos para cada uno de los genes, e incluso en algún caso se ha superado la resistencia de los homocigotos para cada uno de los genes. Esto indica que la combinación de la resistencia derivada de UPV16991 con el gen Ty-1 es la aproximación más práctica para la utilización de esta resistencia, ya que evita la necesidad de fijar el gen de resistencia en ambos parentales. Por último, para la acumulación de resistencia de distinta procedencia en un mismo material, resulta imprescindible disponer de marcadores moleculares ligados a los genes de resistencia. Se han descrito algunos marcadores ligados al gen Ty-1, sin embargo, la presencia del gen Mi, derivado de S. peruvianum, interfiere con los resultados para estos marcadores, obteniéndose falsos positivos. En este trabajo se ha identificado un marcador molecular, JB-1, tipo CAPS (Cleaved Amplified Polymorphic DNA) ligado al gen de resistencia Ty-1. La presencia del gen Mi, así como introgresiones de otras especies como S. lycopersicum (antes Lycopersicon esculentum var. cerasiforme), S. habrochaites y S. pimpinellifolium, no interfieren con los resultados para este marcador. Además, el análisis de materiales con introgresiones de distintas especies silvestres relacionadas con el tomate para varios marcadores de la región del Ty-1 ha permitido localizar el marcador CT21, el RFLP (Restriction Fragment Length Polymorphism) a partir del cual se desarrolló JB-1., [CA] La malaltia de l’arrissat groc de la tomaca (Tomato yellow leaf curl disease, TYLCD) causa greus danys als cultius de tomaca (Solanum lycopersicum L.) del sud-est espanyol i de la major part de les zones tropicals i subtropicals de tot el món. La malaltia està causada per un complex de virus pertanyents al gènere Begomovirus, família Geminiviridae. S’han descrit nou espècies causants de TYLCD i altres sis han sigut proposades. A Espanya estan presents quatre de les espècies virals associades a TYLCD. Les mesures preventives de lluita contra la malaltia, així com les basades en el control de l’insecte vector transmissor (Bemisia tabaci Gen.) no resulten efectives per si mateixes, de manera que el desenvolupament de materials resistents suposa la millor estratègia de lluita a llarg termini. Atés que en l’espècie cultivada no s’han descrit entrades resistents, la recerca de fonts de resistència s’ha centrat en les espècies silvestres del gènere relacionades amb la tomaca. S’ha trobat resistència en distintes entrades d’algunes d’estes espècies i s’han desenvolupat línies de millora i materials comercials amb resistència procedent d’algunes d’elles. El gen Ty-1, derivat de l’entrada LA1969 de S. chilense, ha sigut el més utilitzat per a l’obtenció de línies i híbrids comercials resistents. D’altra banda, fent ús dels avanços en les tècniques d’enginyeria genètica, també s’han desenvolupat materials amb resistència derivada del patogen. No obstant, els materials resistents disponibles fins al moment no suposen una solució definitiva al problema, ja que, amb pressions fortes d’inòcul o infeccions primerenques, les plantes desenvolupen símptomes de la malaltia, produint-se pèrdues de producció. Per este motiu, nombrosos grups d’investigació continuen treballant a nivell mundial amb la finalitat d’obtindre materials amb nivells elevats de resistència a TYLCD. Entre els objectius actuals de millora s’inclouen el desenvolupament de resistència d’ampli espectre a diversos begomovirus, la combinació de gens de distinta procedència per a aconseguir majors nivells de resistència i la identificació de marcadors moleculars lligats als gens de resistència que permeten acurtar els programes de millora i acumular en un mateix material gens de resistència de distintes fonts. El grup de “Millora per a la resistència a la malaltia de l’arrissat groc de la tomaca”, de l’Institut de Conservació i Millora de l’Agrodiversitat Valenciana (COMAV), en el que s’ha realitzat la present tesi doctoral, disposava a l’inici de la mateixa, de distints materials amb resistència a TYLCD, desenvolupats en treballs previs. Entre estos materials es trobaven 12 línies de millora derivades de l’entrades LA1932 i LA1938 de S. chilense, seleccionades per la seua resistència a l’espècie Tomato yellow leaf curl Sardinia virus (TYLCSV), la primera espècie viral causant de TYLCD detectada a Espanya. Resultava d’interés avaluar la resposta d’estos materials a l’espècie Tomato yellow leaf curl virus (TYLCV), introduïda posteriorment a Espanya i més estesa a nivell mundial. Sis de les línies avaluades han mostrat nivells elevats de resistència parcial a TYLCSV i TYLCV, consistent en l’atenuació en la manifestació de símptomes, retard en el moment d’aparició dels mateixos i reducció de l’acumulació viral. A més, no s’han observat en estes línies pèrdues significatives en el rendiment com a conseqüència de la infecció per TYLCV. Les característiques agronòmiques les fan apropiades com a parentals pel desenvolupament d’híbrids amb elevada resistència a TYLCSV i TYLCV. D’altra banda, s’havien identificat nivells elevats de resistència en l’entrada UPV16991 de S. pimpinellifolium. Una vegada fixada la resistència en el fons genètic de S. lycopersicum, i com a pas previ a l’ús en programes de millora, era convenient determinar el control genètic de la mateixa, així com conéixer la seua expressió en el fons genètic de l’espècie cultivada. Per a això s’ha emprat la línia L102, que correspon a la quinta generació d’autofecundació a partir del creuament inicial S. lycopersicum NE-1 x S. pimpinellifolium UPV16991. S’ha comprovat que la resistència parcial a TYLCV de la línia L102 està controlada per un gen amb recessivitat parcial i penetració incompleta. A més, l’expressió de la mateixa depén considerablement del fons genètic de S. lycopersicum en el que s’introgresa, obtenint-se els majors nivells de resistència en creuaments amb línies vigoroses. Per tot açò, es recomana l’ús d’esta resistència bé en homozigosis en el desenvolupament d’híbrids vigorosos, bé en combinació amb resistència procedent d’altres fonts. En este sentit, es va decidir avaluar la resistència en materials que combinaven el gen Ty-1 i el gen derivat d’UPV16991, ambdós en heterozigosis. El nivell de resistència en estos materials ha sigut superior al mostrat pels heterozigots per a cada un dels gens, i fins i tot en algun cas s’ha superat la resistència dels homozigots per a cada un dels gens. Açò indica que la combinació de la resistència derivada d’UPV16991 amb el gen Ty-1 és l’aproximació més pràctica per a la utilització d’esta resistència, ja que evita la necessitat de fixar el gen de resistència en ambdós parentals. Finalment, per a l’acumulació de resistència de distinta procedència en un mateix material, resulta imprescindible disposar de marcadors moleculars lligats als gens de resistència. S’han descrit alguns marcadors lligats al gen Ty-1, no obstant, la presència del gen Mi, derivat de S. peruvianum, interferix amb els resultats per a estos marcadors, obtenint-se falsos positius. En este treball s’ha identificat un marcador molecular, JB-1, tipus CAPS (Cleaved Amplified Polymorphic DNA) lligat al gen de resistència Ty-1. La presència del gen Mi, així com introgresions d’altres espècies com S. lycopersicum (abans Lycopersicon esculentum var. cerasiforme), S. habrochaites i S. pimpinellifolium, no interferixen amb els resultats per a este marcador. A més, l’anàlisi de materials amb introgresions de distintes espècies silvestres relacionades amb la tomaca per a diversos marcadors de la regió del Ty-1 ha permés localitzar el marcador CT21, el RFLP (Restriction Fragment Length Polymorphism) a partir del qual es va desenvolupar JB-1., This research was supported by the “Ministerio de Ciencia y Educación”, project number AGL2001-1857-C04-03.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An HL7-CDA wrapper for facilitating semantic interoperability to rule-based Clinical Decision Support Systems

  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Garcia-Gomez, Juan M
  • Bresó Guardado, Adrián
  • Vicente Robledo, Javier
  • Robles Viejo, Montserrat
The success of Clinical Decision Support Systems (CDSS) greatly depends on its capability of being integrated in Health Information Systems (HIS). Several proposals have been published up to date to permit CDSS gathering patient data from HIS. Some base the CDSS data input on the HL7 reference model, however, they are tailored to specific CDSS or clinical guidelines technologies, or do not focus on standardizing the CDSS resultant knowledge. We propose a solution for facilitating semantic interoperability to rule-based CDSS focusing on standardized input and output documents conforming an HL7-CDA wrapper. We define the HL7-CDA restrictions in a HL7-CDA implementation guide. Patient data and rule inference results are mapped respectively to and from the CDSS by means of a binding method based on an XML binding file. As an independent clinical document, the results of a CDSS can present clinical and legal validity. The proposed solution is being applied in a CDSS for providing patient-specific recommendations for the care management of outpatients with diabetes mellitus., We thank Fagor Electrodomesticos S.Coop for their support and funding in the development of this work, specially to Juan Ramon Inurria and Jorge de Antonio Prieto. We also thank the colaboration from Universidad de Mondragon in the design of the general architecture of the telemedicine system, specially, Felix Larrinaga. This work has been partially supported by the Health Institute Carlos III through the RETICS Combiomed, RD07/0067/2001.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Split and unified functions in the formation of old English nouns and adjectives

  • Vea Escarza, Raquel
This journal article draws a distinction between the split and unified functions obtaining in the formation of Old English nouns and adjectives. The starting point of the discussion is an enlarged inventory of lexical functions that draw on Meaning-Text Theory and structural-functional grammars and explain the change of meaning caused by prefixation and suffixation in Old English. The extended inventory of lexical functions consists of 33 functions and has been applied to ca. 7,500 affixed nouns and adjectives extracted from the lexical database Nerthus (www.nerthusproject.com). The distinction between split and unified functions, in such a way that the former can be realized by both prefixes and suffixes and the latter by either prefixation or suffixation, allows for some generalizations. Firstly, the analysis proves that there are more functions involved in prefixation than in suffixation. Secondly, prefixation is meaning oriented while suffixation is class oriented., This research has been funded through the project FFI2001-29532, which is gratefully acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal analysis of water in reinforced plasma-polymerised poly(2-hydroxyethyl acrylate) hydrogels

  • Serrano Aroca, Ángel
  • Rault, J.
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Thermal analysis of water in reinforce hydrogels of plasma-polymerised poly(2-hydroxyethyl acrylate) (plPHEA) grafted onto macroporous poly(methyl methacrylate) (PMMA) are explained in a simple thermodynamic framework based on the transition diagram. Water in bulk PHEA was also analysed for comparison with plPHEA. These two hydrophilic polymers were prepared with a broad range of water mass fractions from 0.05 to 0.72. Thermal transition diagrams of water/PHEA and water/plPHEA were determined showing less undercooling of water crystallisation in plPHEA than in PHEA. Kinetics of water crystallisation for high and low water contents were studied in both hydrophilic systems following several thermal treatments. Water crystallises much faster in plPHEA than in PHEA for high water contents. For low water contents, crystallisation becomes possible holding at 30 degrees C for some time due to water segregation in both PHEA systems. However, much less water is segregated from the water/plPHEA mixture due to the influence of the hydrophobic component., This work was supported by a Marie Curie Host Fellowship and by the Spanish Science and Technology Ministry through the MAT2001-2678-C02-01 and MAT2002-04239-C03-03 projects. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controladores Borrosos Basados en Estructura Variable con Modos Deslizantes: Aspectos y Similitudes

  • Al-Hadithi, Basil M.
  • Matía, Fernando
  • Jiménez, Agustín
[ES] En este trabajo se revisan las propiedades y las similitudes que presentan los controladores borrosos (FLC) y los de Control de Estructura Variable (VSC) con Modos Deslizantes (SM). Se presentan las características del VSC con SM, se explican los pasos a seguir para diseñar el VSC, se comentan los trabajos que tratan de reducir o evitar el ruido continuo y se revisan varios trabajos que analizan la similitud entre el FLC y el VSC, lo que ha motivado combinar ambos métodos y obtener un controlador robusto que asegure la estabilidad de los sistemas borrosos. Finalmente se explica el diseño de un FLC basado en VSC con SM utilizando el modelo borroso de Takagi- Sugeno y se mencionan cuáles son las ventajas de estas técnicas en presencia de no linealidades e incertidumbre en los sistemas a controlar., Este trabajo está financiado por el Ministerio Español de Ciencia y Tecnología (proyecto URBANO DPI-2001-3652-C02 y proyecto ROBINT DPI-2004-07907-C02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control Predictivo: Pasado, Presente y Futuro

  • Camacho, Eduardo F.
  • Bordons, Carlos
[ES] El control predictivo basado en modelo (Model Predictive Control, MPC ) se ha desarrollado considerablemente en las últimas décadas tanto en la industria como en la comunidad de investigación. Este éxito se debe a que el Control Predictivo basado en Modelo es quizás la forma más general de formular el problema de control en el dominio del tiempo. El control predictivo integra control óptimo, control de procesos con tiempos muertos, procesos multivariables y utiliza las referencias futuras cuando están disponibles. Al utilizar una estrategia con horizonte de control finito permite la consideración de restricciones y procesos no lineales. Este articulo describe el control predictivo y sus posibilidades y pretende actuar como motivación para su utilización., Los autores quieren reconocer el apoyo del Ministerio de Ciencia y Tecnología a través de los proyectos DPI2001-2380-C02-01 y DPI200-4375-C03-0.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plataforma de Ensayo Remoto de Controladores Basados en Autómatas Finitos

  • Gasa Fonollosa, Daniel
  • Garrido Girón, Ignacio
  • Costa Castelló, Ramón
  • Basañez Villaluenga, Luis F.
[ES] En este artículo se describe uno de los componentes de la plataforma desarrollada en el IOC y destinada a la realización de prácticas experimentales de Automática de forma remota. En concreto, se describe el entorno desarrollado en el área de programación de controladores lógicos programables (PLCs) mediante autómatas finitos. Dicho entorno permite programar el comportamiento de una planta didáctica (ascensor) mediante una descripción de basada en autómatas finitos de tipo Moore, y visualizar su evolución mediante realimentación visual y una monitorización remota. El artículo presenta los componentes y la arquitectura de la plataforma así como la aplicación cliente construida., Este trabajo ha sido parcialmente financiado por los proyectos “Laboratorios Remotos de Automática (AFC2001-0388-LD)” y “Laboratoris Remots de Automàtica (UPC)”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Laboratorio Virtual para la Enseñanza de Control Climático de Invernaderos

  • Guzmán, J. L.
  • Rodríguez, F.
  • Berenguel, M.
  • Dormido, S.
[ES] Este trabajo presenta un laboratorio virtual para la enseñanza del control climático de invernaderos. Con este tipo de herramientas se tiene como objetivo conseguir la abstracción de trabajos de investigación consolidados con el fin de que puedan ser utilizados por los estudiantes de forma sencilla y transparente. Concretamente la herramienta desarrollada en este artículo aporta un modelo completo de invernadero con un conjunto de controladores específicos, todo ello accesible a través de una interfaz gráfica estructurada. De esta forma se permite a los alumnos poner en práctica los conocimientos teóricos adquiridos en clase sin restricciones espacio-temporales., Los autores quieren agradecer a la CICYT bajo el marco de los proyectos DPI2001-1012, DPI2001-2380-C02-02 y DPI-2002-04375-C03-03, y la convocatoria de proyectos CR-UAL (2002) en el marco del proyecto 0206.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control Tolerante a Fallos (Parte II): Mecanismos de Tolerancia y Sistema Supervisor

  • Puig, Vicenç
  • Quevedo, Joseba
  • Escobet, Teresa
  • Morcego, Bernardo
  • Ocampo, Carlos
[ES] Los procesos industriales gobernados mediante controladores automáticos pueden presentar fallos. Una forma de aumentar su habilidad consiste en dotarlos de mecanismos de tolerancia frente a los mismos. El diseño de sistemas de control tolerante a fallos es una área emergente en control automático que aglutina diversas disciplinas y áreas teóricas que tienen como objetivo alcanzar esta nueva funcionalidad. La tolerancia a fallos se puede obtener mediante el diagnóstico en tiempo real de los mismos, y mediante el envío de una señal de tipo evento discreto a un sistema supervisor una vez el fallo ha sido detectado, aislado y estimada su magnitud. A su vez el sistema supervisor activará los mecanismos de acomodación/recon?guración para continuar, si es posible, controlando el sistema en fallo. En este artículo se presentan los mecanismos de tolerancia que se pueden activar una vez se ha diagnosticado el fallo así como una arquitectura del sistema supervisor necesario para su implementación real. Finalmente, se presentará la aplicación de algunos de los mecanismos de tolerancia presentados en una aplicación real basada en el control global de la red de alcantarillado de Barcelona., Trabajo subvencionado por la CICYT del Ministerio de Ciencia y Tecnología Español (DPI2002-0350) y por la DGR de la Generalitat de Catalunya (grupo SAC2001/SGR/00236).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

How much do cluster institutions drive a firm&apos, s green innovation? A multi-level analysis

  • Belso, José-Antonio
  • Diez-Vial, Isabel
  • Martín-de Castro, Gregorio
  • Hervás Oliver, Jose Luis|||0000-0001-6438-5497
[EN] This research explores the complementary role of formal institutions at the macro-level and informal ones at the cluster level on a firm's green product innovation. Using mixed methods in a sample of 177 firms dedicated to the footwear industry, belonging to three clusters in three different countries, findings suggest that: (1) the cluster effect positively influences a firm's green product innovation; and (2) informal cluster-level institutions' effect on green product innovation is jointly and positively moderated by national institutions. Green innovation in clusters requires coupling different multi-scalar institutional systems effectively., This work was supported by PID2021-128878NB-100(MCIN/AEI/10.13039/501100011033); the Spanish Ministry of Science and Innovation (Project PID2020-117564GA-I00); the Banco Santander-UCM (Project PR26/16-15B-1 and Project PR108/20-01); and the Chair GVA-UMH for the Transformation of the Economic Model.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sources and sinks of nutrients and pollutants in Cullera Bay

  • Sierra, J.P.
  • Mösso, C
  • González del Rio Rams, Julio
  • Mestres, M.
  • Cupul, L.
  • Sánchez-Arcilla, A.
  • Gónzalez-Marco, D.
  • Puigdefábregas, J.
  • Rodilla, M|||0000-0001-6767-5676
  • Falco, S.|||0000-0002-8679-9153
  • Romero, Inmaculada|||0000-0001-7876-9328
[EN] Water quality plays a very important role in the ecological balance and economic development of coastal and estuarine areas. However, these areas have been progressively degraded in recent decades due to different factors, including an increase in nutrient and pollutant loads introduced into the system, which may cause eutrophication problems. This paper analyzes the water quality of one such area, Cullera Bay, located on the Spanish Mediterranean coast. This study focuses on the main sources and sinks of pollutant substances and the relationship between the distribution of these substances within the bay and local meteorological and oceanographic conditions. Two main sources of nutrients and pollutants were identified: the discharges of the Júcar River and the marine outfall, although other secondary sources are also present. The river discharge varies greatly depending on the season. The freshwater it carries is very rich in nutrients due to the presence of fertilizers and pesticides from its agricultural use. The domestic wastewater discharged through the marine outfall is occasionally untreated, particularly in the summer, when the tourist population increases and the capacity of the water treatment plant is exceeded. This study is based on data recorded during nine field campaigns carried out in the area in 2002 and 2003 and numerical simulations of hydrodynamics and pollutant dispersion. By analyzing the field data and the numerical simulation results, wind is identified as the main driving factor in the bay because the other possible driving factors either have negligible effects (tide), affect only a very localized area (waves, usual river discharges) or are infrequent (storm surges, river floods)., The European Community funded this study as a part of the ECOSUD ‘‘Estuaries and Coastal Areas. Basis and Tools for a More Sustainable Development’’ (reference no. ICA4-CT-2001-10027) and AQUAS ‘‘Water quality and sustainable aquaculture. Links and implications’’ (reference no. INCOCT-2005-015105) projects. It was also funded by the Spanish Ministry of Science and Technology, through the project ‘‘Desarrollo y optimizacio´n de te´cnicas para gestionar los vertidos de aguas residuales de emisarios submarinos (ARTEMISA)’’(Reference no. REN2003-07585-C02-01/MAR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dehydroaromatization of methane under non-oxidative conditions over bifunctional Mo/ITQ-2 catalysts

  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Peris Chanzá, Ernesto José
[EN] Bifunctional Mo/ITQ-2 catalysts have been used for the methane dehydroaromatization (MDA) reaction. The Si/Al ratio, and thus the Brønsted acidity, of the zeolite affected the conversion, the formation rate of aromatics, and the selectivity to the different products (CO, C2, benzene, toluene, and naphthalene). Maximum activity and aromatics productivity were obtained for the zeolite with the lowest Si/Al ratio (Si/ Al = 15) presenting the highest Brønsted acidity, while maximum benzene selectivity ( 70%) occurred for the zeolite with Si/Al = 25. The selectivity to naphthalene increased with decreasing the Si/Al ratio, that is, with increasing the density of surface Brønsted acid sites. At comparable Si/Al ratio, Mo/MCM-22 was more active and selective to benzene than Mo/ITQ-2. Reduction of surface acidity in ITQ-2 by treatment with oxalic acid significantly reduced the formation of naphthalene, resulting in enhanced benzene selectivity ( 75%). The acidtreated ITQ-2 was even more selective to benzene than the Mo/MCM-22 catalyst ( 65%). Molecular dynamics simulations were performed at the MDA reaction temperature (973 K) to study the diffusion of naphthalene in the two independent pore systems of MCM-22. The theoretical results allowed explaining the differences in selectivity between the two zeolite structures and the effect of surface dealumination in ITQ-2. # 2005 Elsevier B.V. All rights reserved, Financial support by the Comisio´n Interministerial de Ciencia y Tecnologı´a (CICYT) of Spain through the projects MAT2001-2726 and MAT2003-07769-C02-01 is gratefully acknowledged. E.P. thanks the Ministerio de Ciencia y Tecnologı´a for a Ph.D. scholarship. We also thank CIEMAT (Centro de Investigaciones Energe´ticas, Medioambientales y Tecnolo´gicas) for the use of their computational facilities.