Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Active damping of a DC network with a constant power load: an adaptive observer-based design

  • Machado, Juan
  • Ortega, Romeo
  • Astolfi, Alessandro
  • Arocas Pérez, José
  • Pyrkin, Anton
  • Bobtsov, Alexey
  • Griñó Cubero, Robert
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper proposes a nonlinear, output feedback, adaptive controller to increase the stability margin of a direct-current (DC), small-scale, electrical network containing an unknown constant power load. Due to their negative incremental impedance, constant power loads are known to reduce the effective damping of a network, leading to voltage oscillations and even to network collapse. To overcome this drawback, we consider the incorporation of a controlled DC-DC power converter in parallel with the constant power load. The design of the control law for the converter is particularly challenging due to the existence of unmeasured states and unknown parameters. We propose a standard input-output linearization stage, to which a suitably tailored adaptive observer is added. The good performance of the controller is evaluated with numerical simulations, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Feedback linearizing control of a magnetically coupled multiport dc-dc converter for automotive applications

  • Olm Miras, Josep Maria
  • Fossas Colet, Enric
  • Repecho del Corral, Víctor
  • Dòria Cerezo, Arnau
  • Griñó Cubero, Robert
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a feedback linearization-based control strategy for a a magnetically coupled multiport dc-dc converter aimed at automotive applications. Essentially, a transformation of control and state variables is proposed in such a way that the resulting system becomes linear and decoupled. Then, a conventional PI controller is devised that renders asymptotic stability, as well as robustness to resistive load uncertainty and presence of constant power loads. The inversion of the control transformation, which involves nonlinear terms, is carried out using linear approximations with no significant performance decay. Hence, simplicity and efficiency are the main features of the control design. The proposal is validated via realistic numerical simulations, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Health-aware LPV model predictive control of wind turbines

  • Khoury, Boutrous
  • Nejjari Akhi-Elarab, Fatiha
  • Puig Cayuela, Vicenç
Wind turbine components are subject to considerable stress and fatigue due to extreme environmental conditions to which they are exposed to, especially when located offshore. Interest in the integration of control with system health monitoring has increased in recent years. The integration of a health management module with model predictive control (MPC) provides the wind turbine a mechanism to operate safely and optimize the trade-off between components’ life and energy production. In this paper, a health-aware LPV model predictive control approach for wind turbines is proposed. The proposed controller establishes a trade-off between the economic objective based on maximizing the energy production but at the same time taking into account the minimization of accumulated stress on the wind turbine blades. The controller uses an LPV model for dealing with the non-linearity of the wind turbine model and the inclusion of the stress model. The proposed approach is tested on a well-known wind turbine case., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403- R) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Reconfigurability analysis of multirotor UAVs under actuator faults

  • Sanjuan Gómez, Adrián
  • Nejjari Akhi-Elarab, Fatiha
  • Sarrate Estruch, Ramon
This paper presents a reconfigurability analysis for different multirotor structures. The aim is to determine whether the multirotor is able to continue the mission without losing its controllability when faults occur in its actuators. The classical controllability condition is not enough in these systems. Hence two complementary methodologies have been developed to analyse the controllability of the multirotors: Analysis of the Static Reconfiguration Module (ASRM) and Attainable Control Set (ACS)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Model-based prognosis approach using a zonotopic Kalman filter with application to a wind turbine

  • Khoury, Boutrous
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
Khoury Boutros et al. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 United States License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited., Wind turbines generally operate under adverse conditions making them prone to relatively high failure rates. Due to the direct exposure of the blades to dynamic and cyclic loads of wind, the rotor and the blades unsurprisingly represent the most common major component damages of a wind turbine system, which is especially enhanced when located offshore. This paper presents a new model-based prognosis procedure based on a zonotopic Kalman filter (ZKF), which combines a physical model with observed data to assess the system degradation. Using this information and the model of the system, the end of life (EOL) and the remaining useful life (RUL) with its uncertainty can be predicted. The proposed prognostic method is applied to monitor the state of health of a wind turbine system specifically, its blades. The remaining useful life prediction will help in scheduling optimal maintenance and reducing the cost caused by wind turbine damage and unplanned shutdown., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017- 88403-R), by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482) and by SMART Project (ref. num. EFA153/16 Interreg Cooperation Program POCTEFA 2014- 2020)., Peer Reviewed, Postprint (published version)