Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Programmable metasurfaces: state of the art and prospects

  • Liu, Fu
  • Pitilakis, Alexandros
  • Mirmoosa, Mohammad Sajjad
  • Tsilipakos, Odysseas
  • Wang, Xuchen
  • Tasolamprou, Anna
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Liaskos, Christos
  • Kantartzis, Nikolaos V.
  • Kafesaki, Maria
  • Economou, Eleftherios
  • Soukoulis, Costas
  • Tretyakov, Sergei
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Metasurfaces, ultrathin and planar electromagnetic devices with sub-wavelength unit cells, have recently attracted enormous attention for their powerful control over electromagnetic waves, from microwave to visible range. With tunability added to the unit cells, the programmable metasurfaces enable us to benefit from multiple unique functionalities controlled by external stimuli. In this review paper, we will discuss the recent progress in the field of programmable metasurfaces and elaborate on different approaches to realize them, with the tunability from global aspects, to local aspects, and to software-defined metasurfaces., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Data conversion in area-constrained applications: the wireless network-on-chip case

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
Network-on-Chip (NoC) is currently the paradigm of choice to interconnect the different components of System-on-Chips (SoCs) or Chip Multiprocessors (CMPs). As the levels of integration continue to grow, however, current NoCs face significant scalability limitations and have prompted research in novel interconnect technologies. Among these, wireless intra-chip communications have been under intense scrutiny due to their low latency broadcast and architectural flexibility. Thus far, the practicality of the idea has been studied from the RF front-end and the network interface perspectives, whereas little to no attention has been placed on another essential component: the data converters. This article aims to fill this gap by providing a comprehensive analysis of the requirements of the scenario, as well as of the current performance and cost trends of Analog-to-Digital Converters (ADCs). Based on Murmann's data, we demonstrate that ADCs will not be a roadblock for the realization of wireless intra-chip communications although current designs do not meet their demands fully., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A general, fault tolerant, adaptive, deadlock-free routing protocol for network-on-chip

  • Stroobant, Pieter
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Tavernier, Wouter
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Colle, Didier
  • Pickavet, Mario
The paper presents a topology-agnostic greedy protocol for network-on-chip routing. The proposed routing algorithm can tolerate any number of permanent faults, and is proven to be deadlock-free. We introduce a specialized variant of the algorithm, which is optimized for 2D mesh networks, both flat and wireless. The adaptiveness and minimality of several variants this algorithm are analyzed through graph-based simulations., P. Stroobant is funded by a Ph.D. grant of Ghent University, Special Research Fund (BOF). S. Abadal and E. Alarcon gratefully acknowledge support by the European Commision under grant H2020-FETOPEN-736876 (VISORSURF)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Intercell wireless communication in software-defined metasurfaces

  • Tasolamprou, Anna
  • Mirmoosa, Mohammad Sajjad
  • Tsilipakos, Odysseas
  • Pitilakis, Alexandros
  • Liu, Fu
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Liaskos, Christos
  • Kantartzis, Nikolaos V.
  • Tretyakov, Sergei
  • Kafesaki, Maria
  • Economou, Eleftherios
  • Soukoulis, Costas
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Tunable metasurfaces are ultra-thin, artificial electromagnetic components that provide engineered and externally adjustable functionalities. The programmable metasurface, the HyperSurFace, concept consists in integrating controllers within the metasurface that interact locally and communicate globally to obtain a given electromagnetic behaviour. Here, we address the design constraints introduced by both functions accommodated by the programmable metasurface, i.e., the desired metasurface operation and the unit cells wireless communication enabling such programmable functionality. The design process for meeting both sets of specifications is thoroughly discussed. Two scenarios for wireless intercell communication are proposed. The first exploits the metasurface layer itself, while the second employs a dedicated communication layer beneath the metasurface backplane. Complexity and performance trade-offs are highlighted., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking control for beam steering using hypersurfaces

  • Ashraf, Nouman
  • Lestas, Marios
  • Saeed, Taqwa
  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Pitsillides, Andreas
  • Liaskos, Christos
Hypersurface, a software defined metasurface (SDM) paradigm constitutes a revolutionary technology aiming at offering programmatic control over all aspects of a propagating wave, altering its direction, power, polarization and phase. In the absence of line of sight (LOS) between a transmitter and a receiver, HSF can provide seamless connectivity via programmatic reflection. However, such an application requires fine tuning of the metasurface reconfiguration parameters, which may not be effective when done in an open loop fashion due to model uncertainties. In this work, we consider a feedback-based formulation of the problem, which involves maximization of the received power and propose the use of Extremum Seeking Control (ESC) for the controller implementation due to fact that it is model-free and adheres to the maximization problem. Extensive simulations indicate that the proposed scheme is successful in guiding the impinging wave to the receiver within reasonable time even in the presence of time varying delays incurred by message propagation. In addition, a discrete time implementation is considered, investigating its limitations as we increase the sampling time while also characterizing the traffic within the controller network., This work was funded by the European Union via the Horizon 2020: Future Emerging Topics call (FETOPEN), grant EU736876, project VISORSURF (http://www.visorsurf.eu)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Workload characterization of programmable metasurfaces

  • Saeed, Taqwa
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Liaskos, Christos
  • Pitsillides, Andreas
  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Lestas, Marios
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
Metasurfaces are envisaged to play a key role in next-generation wireless systems due to their powerful control over electromagnetic waves. The last decade has witnessed huge advances in this regard, shifting from static to programmable metasurfaces. The HyperSurface (HSF) paradigm takes one step further by integrating a network of controllers within the device with the aim of adding intelligence, connectivity, and autonomy. However, little is known about the traffic that this network will have to support as the target electromagnetic function or boundary conditions change. In this paper, we lay down the foundations of a methodology to characterize the workload of programmable metasurfaces and then employ it to analyze the case of beam steering HSFs. We observe that traffic is bursty and highly dependent on the position of the target. These results will enable the early-stage evaluation of intra-HSF networks, as well as the estimation of the system performance and cost., This work was supported by the European Union’s Horizon 2020 research and innovation programme-Future Emerging Topics (FETOPEN) under grant agreement No 736876., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Graphene-based terahertz antennas for area-constrained applications

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Hosseininejad, Seyed Ehsan
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene is enabling a plethora of applications in a wide range of fields due to its unique electrical, mechanical, and optical properties. In the realm of wireless communications, graphene shows great promise for the implementation of miniaturized and tunable antennas in the terahertz band. These unique advantages open the door to disruptive wireless applications in highly integrated scenarios where conventional communications means cannot be employed. In this paper, recent advances in plasmonic graphene antennas are presented. Wireless Network-on-Chip (WNoC) and Software-Defined Metamaterials (SDMs), two new area-constrained applications uniquely suited to the characteristics of graphene antennas, are then described. The challenges in terms of antenna design and channel characterization are outlined for both case scenarios., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Millimeter-wave propagation within a computer chip package

  • Timoneda, Xavier
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Manessis, Dionyssios
  • Zhou, Jin
  • Franques, Antonio
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. The WNoC paradigm has been extensively analyzed from the physical, network and architecture perspectives assuming mmWave band operation. However, there has not been a comprehensive study at this band for realistic chip packages and, thus, the characteristics of such wireless channel remain not fully understood. This work addresses this issue by accurately modeling a flip-chip package and investigating the wave propagation inside it. Through parametric studies, a locally optimal configuration for 60 GHz WNoC is obtained, showing that chip-wide attenuation below 32.6 dB could be achieved with standard processes. Finally, the applicability of the methodology is discussed for higher bands and other integrated environments such as a Software-Defined Metamaterial (SDM)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Channel characterization for chip-scale wireless communications within computing packages

  • Timoneda i Comas, Xavier
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Manessis, Dionyssios
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. WNoC takes advantage of an overlaid network composed by a set of millimeter-wave antennas to reduce latency and increase throughput in the communication between cores. Similarly, wireless inter-chip communication has been also proposed to improve the information transfer between processors, memory, and accelerators in multi-chip settings. However, the wireless channel remains largely unknown in both scenarios, especially in the presence of realistic chip packages. This work addresses the issue by accurately modeling flip-chip packages and investigating the propagation both its interior and its surroundings. Through parametric studies, package configurations that minimize path loss are obtained and the trade-offs observed when applying such optimizations are discussed. Single-chip and multi-chip architectures are compared in terms of the path loss exponent, confirming that the amount of bulk silicon found in the pathway between transmitter and receiver is the main determinant of losses., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

ABSense: sensing electromagnetic waves on metasurfaces via ambient compilation of full absorption

  • Liaskos, Christos
  • Pyrialakos, Georgios
  • Pitilakis, Alexandros
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Tsioliaridou, Ageliki
  • Tasolamprou, Anna
  • Tsilipakos, Odysseas
  • Kantartzis, Nikolaos V.
  • Ioannidis, Sotiris
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Kafesaki, Maria
  • Pitsillides, Andreas
  • Kossifos, Kypros
  • Georgiou, Julius
  • Akyildiz, Ian
Metasurfaces (MS) constitute effective media for manipulating and transforming impinging EM waves. Related studies have explored a series of impactful MS capabilities and applications in areas such as wireless communications, medical imaging and energy harvesting. A key-gap in the existing body of work is that the attributes of the EM waves to-be-controlled (e.g., direction, polarization, phase) are known in advance. The present work proposes a solution to the EM wave sensing problem using the intelligent and networked MS counterparts-the HyperSurfaces (HSFs), without requiring dedicated field sensors. An nano-network embedded within the HSF iterates over the possible MS configurations, finding the one that fully absorbs the impinging EM wave, hence maximizing the energy distribution within the HSF. Using a distributed consensus approach, the nano-network then matches the found configuration to the most probable EM wave traits, via a static lookup table that can be created during the HSF manufacturing. Realistic simulations demonstrate the potential of the novel scheme. Moreover, we show that the proposed workflow is also an ambient EM compiler, i.e., an autonomic HSF that translates high-level EM objectives to corresponding, low-level EM actuation commands., This work was funded by the European Union via the Horizon 2020: Future Emerging Topics call (FETOPEN), grant EU736876, project VISORSURF (http://www.visorsurf.eu)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

MAC-oriented programmable terahertz PHY via graphene-based Yagi-Uda antennas

  • Hosseininejad, Seyed Ehsan
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Lemme, Max
  • Suessmeier, Christoph
  • Bolívar, Peter Haring
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene is enabling a plethora of applications in a wide range of fields due to its unique electrical, mechanical, and optical properties. In the realm of wireless communications, graphene shows great promise for the implementation of miniaturized and tunable antennas in the terahertz band. These unique advantages open the door to new reconfigurable antenna structures which, in turn, enable novel communication protocols at different levels of the stack. This paper explores both aspects by, first, presenting a terahertz Yagi-Uda-like antenna concept that achieves reconfiguration both in frequency and beam direction simultaneously. Then, a programmable antenna controller design is proposed to expose the reconfigurability to the PHY and MAC layers, and several examples of its applicability are given. The performance and cost of the proposed scheme is evaluated through full-wave simulations and comparative analysis, demonstrating reconfigurability at nanosecond granularity with overheads below 0.02 mm2and 0.2 mW., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Opportunistic beamforming in wireless network-on-chip

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Marruedo, Adrián
  • Franques, Antonio
  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Zhou, Jin
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Wireless Network-on-Chip (WNoC) has emerged as a promising alternative to conventional interconnect fabrics at the chip scale. Since WNoCs may imply the close integration of antennas, one of the salient challenges in this scenario is the management of coupling and interferences. This paper, instead of combating coupling, aims to take advantage of close integration to create arrays within a WNoC. The proposed solution is opportunistic as it attempts to exploit the existing infrastructure to build a simple reconfigurable beamforming scheme. Full-wave simulations show that, despite the effects of lossy silicon and nearby antennas, within-package arrays achieve moderate gains and beamwidths below 90°, a figure which is already relevant in the multiprocessor context., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of a plasmonic graphene antenna for microelectronic applications

  • Suessrneier, C.
  • Thiel, F.
  • Wigger, Anna K.
  • Bolívar, Peter Haring
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Banszcrus, L.
  • Stampfer, C.
  • Lemme, M.
Graphene offers a large potential to downscale antennas to the micrometer scale, due to its special dispersion relation and its ability to support plasmons in the THz frequency range. For an adequate performance of the antenna, graphene material quality is crucial. A high chemical potential, as well as a high relaxation time are needed. Fabrication and processing, as well as the material environment are very critical to achieve a high graphene quality and a good emissivity of the antenna. We demonstrate the simulation, fabrication and analysis of a graphene based plasmonic antenna structure acting as an active THz emission device., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Terahertz dielectric resonator antenna coupled to graphene plasmonic dipole

  • Hosseininejad, Seyed Ehsan
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Lemme, Max
  • Bolívar, Peter Haring
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
This paper presents an efficient approach for exciting a dielectric resonator antenna (DRA) in the terahertz frequencies by means of a graphene plasmonic dipole. Design and analysis are performed in two steps. First, the propagation properties of hybrid plasmonic one-dimensional and two-dimensional structures are obtained by using transfer matrix theory and the finite-element method. The coupling amount between the plasmonic graphene mode and the dielectric wave mode is explored based on different parameters. These results, together with DRA and plasmonic antenna theory, are then used to design a DRA antenna that supports the TEy 112 mode at 2.4 THz and achieves a gain (IEEE) of up to 7 dBi and a radiation efficiency of up 70%. This gain is 6.5 dB higher than that of the graphene dipole alone and achieved with a moderate area overhead, demonstrating the value of the proposed structure., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fault tolerance in programmable metasurfaces: the beam steering case

  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Georgiou, Julius
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
Metasurfaces, the two-dimensional counterpart of metamaterials, have caught great attention thanks to their powerful control over electromagnetic waves. Recent times have seen the emergence of a variety of metasurfaces exhibiting not only countless functionalities, but also a reconfigurable or even programmable response. Reconfigurability, however, entails the integration of tuning and control circuits within the metasurface structure and, as this new paradigm moves forward, new reliability challenges may arise. This paper examines, for the first time, the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and instantiated for beam steering, which constitutes a relevant example for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 10% can still be considered acceptable., This work has been supported by the European Commission under grant H2020-FETOPEN-736876 (VISORSURF) and by ICREA under the ICREA Academia programme., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Toward dynamically adapting wireless intra-chip channels to traffic needs with a programmable metasurface

  • Imani, Mohammadreza
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Del Hougne, Philipp
We introduce the idea of endowing on-chip wireless propagation environments with in-situ programmability by equipping the chip package with a programmable metasurface. The limitations of current wired chip interconnect fabrics present a serious performance bottleneck for multi-core chips. Wireless links between far-apart cores are a promising complementary link technique but struggle with the complex on-chip propagation environment presenting strong multipath effects. We expect that these challenges can be addressed with the ability to shape wireless channels between far-apart cores and to dynamically adapt them to traffic needs; for instance, by tailoring the impulse response between two wireless nodes, it may be feasible to prevent inter-symbol interference. Here, we present our recent progress toward this goal, including an analysis of the on-chip propagation environment, an efficient design of programmable meta-atoms suitable for the on-chip environment and operating in the 60 GHz regime, and a detailed discussion of different single-channel and multi-channel use-case scenarios., S.A. acknowledges support from the European Commission throughthe H2020 FET-OPEN program under grants No. 736876 and No. 863337, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Toward localization in terahertz-operating energy harvesting software-defined metamaterials: context analysis

  • Lemic, Filip
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Famaey, Jeroen
Software-defined metamaterials (SDMs) represent a novel paradigm for real-time control of metamaterials. SDMs are envisioned to enable a variety of exciting applications in the domains such as smart textiles and sensing in challenging conditions. Many of these applications envisage deformations of the SDM structure (e.g., rolling, bending, stretching). This affects the relative position of the metamaterial elements and requires their localization relative to each other. The question of how to perform such localization is, however, yet to spark in the community. We consider that the metamaterial elements are controlled wirelessly through a Terahertz (THz)-operating nanonetwork. Moreover, we consider the elements to be energy constrained, with their sole powering option being to harvest environmental energy. For such a setup, we demonstrate sub-millimeter accuracy of the two-way Time of Flight (ToF)-based localization, as well as high availability of the service (i.e., consistently more than 80% of the time), which is a result of the low energy consumed in localization. Finally, we provide the localization context for a number of relevant system parameters such as operational frequency, bandwidth, and harvesting rate., The author Filip Lemic was supported by the EU Marie Curie Actions Individual Fellowship project Scalable Localization-enabled Inbody Terahertz Nanonetwork (SCaLeITN), grant nr. 893760. In addition, this work received support from the University of Antwerp’s University Research Fund (BOF). This work also received funding from the European Union via the Horizon 2020 Future Emerging Topics call (FETOPEN), grant no. 736876., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Millimeter-wave propagation within a computer chip package

  • Timoneda, Xavier
  • Abadal Cavallé, Sergi
  • Cabellos Aparicio, Alberto
  • Manessis, Dionyssios
  • Zhou, Jin
  • Franques, Antonio
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. The WNoC paradigm has been extensively analyzed from the physical, network and architecture perspectives assuming mmWave band operation. However, there has not been a comprehensive study at this band for realistic chip packages and, thus, the characteristics of such wireless channel remain not fully understood. This work addresses this issue by accurately modeling a flip-chip package and investigating the wave propagation inside it. Through parametric studies, a locally optimal configuration for 60 GHz WNoC is obtained, showing that chip-wide attenuation below 32.6 dB could be achieved with standard processes. Finally, the applicability of the methodology is discussed for higher bands and other integrated environments such as a Software-Defined Metamaterial (SDM)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Toward localization in terahertz-operating energy harvesting software-defined metamaterials: context analysis

  • Lemic, Filip
  • Abadal Cavallé, Sergi
  • Famaey, Jeroen
Software-defined metamaterials (SDMs) represent a novel paradigm for real-time control of metamaterials. SDMs are envisioned to enable a variety of exciting applications in the domains such as smart textiles and sensing in challenging conditions. Many of these applications envisage deformations of the SDM structure (e.g., rolling, bending, stretching). This affects the relative position of the metamaterial elements and requires their localization relative to each other. The question of how to perform such localization is, however, yet to spark in the community. We consider that the metamaterial elements are controlled wirelessly through a Terahertz (THz)-operating nanonetwork. Moreover, we consider the elements to be energy constrained, with their sole powering option being to harvest environmental energy. For such a setup, we demonstrate sub-millimeter accuracy of the two-way Time of Flight (ToF)-based localization, as well as high availability of the service (i.e., consistently more than 80% of the time), which is a result of the low energy consumed in localization. Finally, we provide the localization context for a number of relevant system parameters such as operational frequency, bandwidth, and harvesting rate., The author Filip Lemic was supported by the EU Marie Curie Actions Individual Fellowship project Scalable Localization-enabled Inbody Terahertz Nanonetwork (SCaLeITN), grant nr. 893760. In addition, this work received support from the University of Antwerp’s University Research Fund (BOF). This work also received funding from the European Union via the Horizon 2020 Future Emerging Topics call (FETOPEN), grant no. 736876., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Data conversion in area-constrained applications: the wireless network-on-chip case

  • Abadal Cavallé, Sergi
  • Alarcón Cot, Eduardo José
Network-on-Chip (NoC) is currently the paradigm of choice to interconnect the different components of System-on-Chips (SoCs) or Chip Multiprocessors (CMPs). As the levels of integration continue to grow, however, current NoCs face significant scalability limitations and have prompted research in novel interconnect technologies. Among these, wireless intra-chip communications have been under intense scrutiny due to their low latency broadcast and architectural flexibility. Thus far, the practicality of the idea has been studied from the RF front-end and the network interface perspectives, whereas little to no attention has been placed on another essential component: the data converters. This article aims to fill this gap by providing a comprehensive analysis of the requirements of the scenario, as well as of the current performance and cost trends of Analog-to-Digital Converters (ADCs). Based on Murmann's data, we demonstrate that ADCs will not be a roadblock for the realization of wireless intra-chip communications although current designs do not meet their demands fully., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

ABSense: sensing electromagnetic waves on metasurfaces via ambient compilation of full absorption

  • Liaskos, Christos
  • Pyrialakos, Georgios
  • Pitilakis, Alexandros
  • Abadal Cavallé, Sergi
  • Tsioliaridou, Ageliki
  • Tasolamprou, Anna
  • Tsilipakos, Odysseas
  • Kantartzis, Nikolaos V.
  • Ioannidis, Sotiris
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
  • Kafesaki, Maria
  • Pitsillides, Andreas
  • Kossifos, Kypros
  • Georgiou, Julius
  • Akyildiz, Ian
Metasurfaces (MS) constitute effective media for manipulating and transforming impinging EM waves. Related studies have explored a series of impactful MS capabilities and applications in areas such as wireless communications, medical imaging and energy harvesting. A key-gap in the existing body of work is that the attributes of the EM waves to-be-controlled (e.g., direction, polarization, phase) are known in advance. The present work proposes a solution to the EM wave sensing problem using the intelligent and networked MS counterparts-the HyperSurfaces (HSFs), without requiring dedicated field sensors. An nano-network embedded within the HSF iterates over the possible MS configurations, finding the one that fully absorbs the impinging EM wave, hence maximizing the energy distribution within the HSF. Using a distributed consensus approach, the nano-network then matches the found configuration to the most probable EM wave traits, via a static lookup table that can be created during the HSF manufacturing. Realistic simulations demonstrate the potential of the novel scheme. Moreover, we show that the proposed workflow is also an ambient EM compiler, i.e., an autonomic HSF that translates high-level EM objectives to corresponding, low-level EM actuation commands., This work was funded by the European Union via the Horizon 2020: Future Emerging Topics call (FETOPEN), grant EU736876, project VISORSURF (http://www.visorsurf.eu)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Programmable metasurfaces: state of the art and prospects

  • Liu, Fu
  • Pitilakis, Alexandros
  • Mirmoosa, Mohammad Sajjad
  • Tsilipakos, Odysseas
  • Wang, Xuchen
  • Tasolamprou, Anna
  • Abadal Cavallé, Sergi
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
  • Liaskos, Christos
  • Kantartzis, Nikolaos V.
  • Kafesaki, Maria
  • Economou, Eleftherios
  • Soukoulis, Costas
  • Tretyakov, Sergei
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Metasurfaces, ultrathin and planar electromagnetic devices with sub-wavelength unit cells, have recently attracted enormous attention for their powerful control over electromagnetic waves, from microwave to visible range. With tunability added to the unit cells, the programmable metasurfaces enable us to benefit from multiple unique functionalities controlled by external stimuli. In this review paper, we will discuss the recent progress in the field of programmable metasurfaces and elaborate on different approaches to realize them, with the tunability from global aspects, to local aspects, and to software-defined metasurfaces., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Graphene-based terahertz antennas for area-constrained applications

  • Abadal Cavallé, Sergi
  • Hosseininejad, Seyed Ehsan
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene is enabling a plethora of applications in a wide range of fields due to its unique electrical, mechanical, and optical properties. In the realm of wireless communications, graphene shows great promise for the implementation of miniaturized and tunable antennas in the terahertz band. These unique advantages open the door to disruptive wireless applications in highly integrated scenarios where conventional communications means cannot be employed. In this paper, recent advances in plasmonic graphene antennas are presented. Wireless Network-on-Chip (WNoC) and Software-Defined Metamaterials (SDMs), two new area-constrained applications uniquely suited to the characteristics of graphene antennas, are then described. The challenges in terms of antenna design and channel characterization are outlined for both case scenarios., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Workload characterization of programmable metasurfaces

  • Saeed, Taqwa
  • Abadal Cavallé, Sergi
  • Liaskos, Christos
  • Pitsillides, Andreas
  • Taghvaee, Hamidreza
  • Cabellos Aparicio, Alberto
  • Lestas, Marios
  • Alarcón Cot, Eduardo José
Metasurfaces are envisaged to play a key role in next-generation wireless systems due to their powerful control over electromagnetic waves. The last decade has witnessed huge advances in this regard, shifting from static to programmable metasurfaces. The HyperSurface (HSF) paradigm takes one step further by integrating a network of controllers within the device with the aim of adding intelligence, connectivity, and autonomy. However, little is known about the traffic that this network will have to support as the target electromagnetic function or boundary conditions change. In this paper, we lay down the foundations of a methodology to characterize the workload of programmable metasurfaces and then employ it to analyze the case of beam steering HSFs. We observe that traffic is bursty and highly dependent on the position of the target. These results will enable the early-stage evaluation of intra-HSF networks, as well as the estimation of the system performance and cost., This work was supported by the European Union’s Horizon 2020 research and innovation programme-Future Emerging Topics (FETOPEN) under grant agreement No 736876., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Toward dynamically adapting wireless intra-chip channels to traffic needs with a programmable metasurface

  • Imani, Mohammadreza
  • Abadal Cavallé, Sergi
  • Del Hougne, Philipp
We introduce the idea of endowing on-chip wireless propagation environments with in-situ programmability by equipping the chip package with a programmable metasurface. The limitations of current wired chip interconnect fabrics present a serious performance bottleneck for multi-core chips. Wireless links between far-apart cores are a promising complementary link technique but struggle with the complex on-chip propagation environment presenting strong multipath effects. We expect that these challenges can be addressed with the ability to shape wireless channels between far-apart cores and to dynamically adapt them to traffic needs; for instance, by tailoring the impulse response between two wireless nodes, it may be feasible to prevent inter-symbol interference. Here, we present our recent progress toward this goal, including an analysis of the on-chip propagation environment, an efficient design of programmable meta-atoms suitable for the on-chip environment and operating in the 60 GHz regime, and a detailed discussion of different single-channel and multi-channel use-case scenarios., S.A. acknowledges support from the European Commission throughthe H2020 FET-OPEN program under grants No. 736876 and No. 863337, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A general, fault tolerant, adaptive, deadlock-free routing protocol for network-on-chip

  • Stroobant, Pieter
  • Abadal Cavallé, Sergi
  • Tavernier, Wouter
  • Alarcón Cot, Eduardo José
  • Colle, Didier
  • Pickavet, Mario
The paper presents a topology-agnostic greedy protocol for network-on-chip routing. The proposed routing algorithm can tolerate any number of permanent faults, and is proven to be deadlock-free. We introduce a specialized variant of the algorithm, which is optimized for 2D mesh networks, both flat and wireless. The adaptiveness and minimality of several variants this algorithm are analyzed through graph-based simulations., P. Stroobant is funded by a Ph.D. grant of Ghent University, Special Research Fund (BOF). S. Abadal and E. Alarcon gratefully acknowledge support by the European Commision under grant H2020-FETOPEN-736876 (VISORSURF)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Channel characterization for chip-scale wireless communications within computing packages

  • Timoneda i Comas, Xavier
  • Cabellos Aparicio, Alberto
  • Manessis, Dionyssios
  • Alarcón Cot, Eduardo José
  • Abadal Cavallé, Sergi
Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. WNoC takes advantage of an overlaid network composed by a set of millimeter-wave antennas to reduce latency and increase throughput in the communication between cores. Similarly, wireless inter-chip communication has been also proposed to improve the information transfer between processors, memory, and accelerators in multi-chip settings. However, the wireless channel remains largely unknown in both scenarios, especially in the presence of realistic chip packages. This work addresses the issue by accurately modeling flip-chip packages and investigating the propagation both its interior and its surroundings. Through parametric studies, package configurations that minimize path loss are obtained and the trade-offs observed when applying such optimizations are discussed. Single-chip and multi-chip architectures are compared in terms of the path loss exponent, confirming that the amount of bulk silicon found in the pathway between transmitter and receiver is the main determinant of losses., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fault tolerance in programmable metasurfaces: the beam steering case

  • Taghvaee, Hamidreza
  • Abadal Cavallé, Sergi
  • Georgiou, Julius
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
Metasurfaces, the two-dimensional counterpart of metamaterials, have caught great attention thanks to their powerful control over electromagnetic waves. Recent times have seen the emergence of a variety of metasurfaces exhibiting not only countless functionalities, but also a reconfigurable or even programmable response. Reconfigurability, however, entails the integration of tuning and control circuits within the metasurface structure and, as this new paradigm moves forward, new reliability challenges may arise. This paper examines, for the first time, the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and instantiated for beam steering, which constitutes a relevant example for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 10% can still be considered acceptable., This work has been supported by the European Commission under grant H2020-FETOPEN-736876 (VISORSURF) and by ICREA under the ICREA Academia programme., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Intercell wireless communication in software-defined metasurfaces

  • Tasolamprou, Anna
  • Mirmoosa, Mohammad Sajjad
  • Tsilipakos, Odysseas
  • Pitilakis, Alexandros
  • Liu, Fu
  • Abadal Cavallé, Sergi
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
  • Liaskos, Christos
  • Kantartzis, Nikolaos V.
  • Tretyakov, Sergei
  • Kafesaki, Maria
  • Economou, Eleftherios
  • Soukoulis, Costas
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Tunable metasurfaces are ultra-thin, artificial electromagnetic components that provide engineered and externally adjustable functionalities. The programmable metasurface, the HyperSurFace, concept consists in integrating controllers within the metasurface that interact locally and communicate globally to obtain a given electromagnetic behaviour. Here, we address the design constraints introduced by both functions accommodated by the programmable metasurface, i.e., the desired metasurface operation and the unit cells wireless communication enabling such programmable functionality. The design process for meeting both sets of specifications is thoroughly discussed. Two scenarios for wireless intercell communication are proposed. The first exploits the metasurface layer itself, while the second employs a dedicated communication layer beneath the metasurface backplane. Complexity and performance trade-offs are highlighted., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Terahertz dielectric resonator antenna coupled to graphene plasmonic dipole

  • Hosseininejad, Seyed Ehsan
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Abadal Cavallé, Sergi
  • Lemme, Max
  • Bolívar, Peter Haring
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
This paper presents an efficient approach for exciting a dielectric resonator antenna (DRA) in the terahertz frequencies by means of a graphene plasmonic dipole. Design and analysis are performed in two steps. First, the propagation properties of hybrid plasmonic one-dimensional and two-dimensional structures are obtained by using transfer matrix theory and the finite-element method. The coupling amount between the plasmonic graphene mode and the dielectric wave mode is explored based on different parameters. These results, together with DRA and plasmonic antenna theory, are then used to design a DRA antenna that supports the TEy 112 mode at 2.4 THz and achieves a gain (IEEE) of up to 7 dBi and a radiation efficiency of up 70%. This gain is 6.5 dB higher than that of the graphene dipole alone and achieved with a moderate area overhead, demonstrating the value of the proposed structure., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of a plasmonic graphene antenna for microelectronic applications

  • Suessrneier, C.
  • Thiel, F.
  • Wigger, Anna K.
  • Bolívar, Peter Haring
  • Abadal Cavallé, Sergi
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
  • Banszcrus, L.
  • Stampfer, C.
  • Lemme, M.
Graphene offers a large potential to downscale antennas to the micrometer scale, due to its special dispersion relation and its ability to support plasmons in the THz frequency range. For an adequate performance of the antenna, graphene material quality is crucial. A high chemical potential, as well as a high relaxation time are needed. Fabrication and processing, as well as the material environment are very critical to achieve a high graphene quality and a good emissivity of the antenna. We demonstrate the simulation, fabrication and analysis of a graphene based plasmonic antenna structure acting as an active THz emission device., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking control for beam steering using hypersurfaces

  • Ashraf, Nouman
  • Lestas, Marios
  • Saeed, Taqwa
  • Taghvaee, Hamidreza
  • Abadal Cavallé, Sergi
  • Pitsillides, Andreas
  • Liaskos, Christos
Hypersurface, a software defined metasurface (SDM) paradigm constitutes a revolutionary technology aiming at offering programmatic control over all aspects of a propagating wave, altering its direction, power, polarization and phase. In the absence of line of sight (LOS) between a transmitter and a receiver, HSF can provide seamless connectivity via programmatic reflection. However, such an application requires fine tuning of the metasurface reconfiguration parameters, which may not be effective when done in an open loop fashion due to model uncertainties. In this work, we consider a feedback-based formulation of the problem, which involves maximization of the received power and propose the use of Extremum Seeking Control (ESC) for the controller implementation due to fact that it is model-free and adheres to the maximization problem. Extensive simulations indicate that the proposed scheme is successful in guiding the impinging wave to the receiver within reasonable time even in the presence of time varying delays incurred by message propagation. In addition, a discrete time implementation is considered, investigating its limitations as we increase the sampling time while also characterizing the traffic within the controller network., This work was funded by the European Union via the Horizon 2020: Future Emerging Topics call (FETOPEN), grant EU736876, project VISORSURF (http://www.visorsurf.eu)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Opportunistic beamforming in wireless network-on-chip

  • Abadal Cavallé, Sergi
  • Marruedo, Adrián
  • Franques, Antonio
  • Taghvaee, Hamidreza
  • Cabellos Aparicio, Alberto
  • Zhou, Jin
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Wireless Network-on-Chip (WNoC) has emerged as a promising alternative to conventional interconnect fabrics at the chip scale. Since WNoCs may imply the close integration of antennas, one of the salient challenges in this scenario is the management of coupling and interferences. This paper, instead of combating coupling, aims to take advantage of close integration to create arrays within a WNoC. The proposed solution is opportunistic as it attempts to exploit the existing infrastructure to build a simple reconfigurable beamforming scheme. Full-wave simulations show that, despite the effects of lossy silicon and nearby antennas, within-package arrays achieve moderate gains and beamwidths below 90°, a figure which is already relevant in the multiprocessor context., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

MAC-oriented programmable terahertz PHY via graphene-based Yagi-Uda antennas

  • Hosseininejad, Seyed Ehsan
  • Abadal Cavallé, Sergi
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Lemme, Max
  • Suessmeier, Christoph
  • Bolívar, Peter Haring
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene is enabling a plethora of applications in a wide range of fields due to its unique electrical, mechanical, and optical properties. In the realm of wireless communications, graphene shows great promise for the implementation of miniaturized and tunable antennas in the terahertz band. These unique advantages open the door to new reconfigurable antenna structures which, in turn, enable novel communication protocols at different levels of the stack. This paper explores both aspects by, first, presenting a terahertz Yagi-Uda-like antenna concept that achieves reconfiguration both in frequency and beam direction simultaneously. Then, a programmable antenna controller design is proposed to expose the reconfigurability to the PHY and MAC layers, and several examples of its applicability are given. The performance and cost of the proposed scheme is evaluated through full-wave simulations and comparative analysis, demonstrating reconfigurability at nanosecond granularity with overheads below 0.02 mm2and 0.2 mW., Peer Reviewed, Postprint (published version)