Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 66
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Programmable metasurfaces: state of the art and prospects

  • Liu, Fu
  • Pitilakis, Alexandros
  • Mirmoosa, Mohammad Sajjad
  • Tsilipakos, Odysseas
  • Wang, Xuchen
  • Tasolamprou, Anna
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Liaskos, Christos
  • Kantartzis, Nikolaos V.
  • Kafesaki, Maria
  • Economou, Eleftherios
  • Soukoulis, Costas
  • Tretyakov, Sergei
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Metasurfaces, ultrathin and planar electromagnetic devices with sub-wavelength unit cells, have recently attracted enormous attention for their powerful control over electromagnetic waves, from microwave to visible range. With tunability added to the unit cells, the programmable metasurfaces enable us to benefit from multiple unique functionalities controlled by external stimuli. In this review paper, we will discuss the recent progress in the field of programmable metasurfaces and elaborate on different approaches to realize them, with the tunability from global aspects, to local aspects, and to software-defined metasurfaces., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Data conversion in area-constrained applications: the wireless network-on-chip case

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
Network-on-Chip (NoC) is currently the paradigm of choice to interconnect the different components of System-on-Chips (SoCs) or Chip Multiprocessors (CMPs). As the levels of integration continue to grow, however, current NoCs face significant scalability limitations and have prompted research in novel interconnect technologies. Among these, wireless intra-chip communications have been under intense scrutiny due to their low latency broadcast and architectural flexibility. Thus far, the practicality of the idea has been studied from the RF front-end and the network interface perspectives, whereas little to no attention has been placed on another essential component: the data converters. This article aims to fill this gap by providing a comprehensive analysis of the requirements of the scenario, as well as of the current performance and cost trends of Analog-to-Digital Converters (ADCs). Based on Murmann's data, we demonstrate that ADCs will not be a roadblock for the realization of wireless intra-chip communications although current designs do not meet their demands fully., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A general, fault tolerant, adaptive, deadlock-free routing protocol for network-on-chip

  • Stroobant, Pieter
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Tavernier, Wouter
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Colle, Didier
  • Pickavet, Mario
The paper presents a topology-agnostic greedy protocol for network-on-chip routing. The proposed routing algorithm can tolerate any number of permanent faults, and is proven to be deadlock-free. We introduce a specialized variant of the algorithm, which is optimized for 2D mesh networks, both flat and wireless. The adaptiveness and minimality of several variants this algorithm are analyzed through graph-based simulations., P. Stroobant is funded by a Ph.D. grant of Ghent University, Special Research Fund (BOF). S. Abadal and E. Alarcon gratefully acknowledge support by the European Commision under grant H2020-FETOPEN-736876 (VISORSURF)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Intercell wireless communication in software-defined metasurfaces

  • Tasolamprou, Anna
  • Mirmoosa, Mohammad Sajjad
  • Tsilipakos, Odysseas
  • Pitilakis, Alexandros
  • Liu, Fu
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Liaskos, Christos
  • Kantartzis, Nikolaos V.
  • Tretyakov, Sergei
  • Kafesaki, Maria
  • Economou, Eleftherios
  • Soukoulis, Costas
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Tunable metasurfaces are ultra-thin, artificial electromagnetic components that provide engineered and externally adjustable functionalities. The programmable metasurface, the HyperSurFace, concept consists in integrating controllers within the metasurface that interact locally and communicate globally to obtain a given electromagnetic behaviour. Here, we address the design constraints introduced by both functions accommodated by the programmable metasurface, i.e., the desired metasurface operation and the unit cells wireless communication enabling such programmable functionality. The design process for meeting both sets of specifications is thoroughly discussed. Two scenarios for wireless intercell communication are proposed. The first exploits the metasurface layer itself, while the second employs a dedicated communication layer beneath the metasurface backplane. Complexity and performance trade-offs are highlighted., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Metasurface-programmable wireless network-on-chip

  • Imani, Mohammadreza
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Del Hougne, Philipp
This paper introduces the concept of smart radio environments, currently intensely studied for wireless communication in metasurface-programmable meter-scaled environments (e.g., inside rooms), on the chip scale. Wireless networks-on-chips (WNoCs) are a candidate technology to improve inter-core communication on chips but current proposals are plagued by a dilemma: either the received signal is weak, or it is significantly reverberated such that the on–off-keying modulation speed must be throttled. Here, this vexing problem is overcome by endowing the wireless on-chip environment with in situ programmability which enables the shaping of the channel impulse response (CIR); thereby, a pulse-like CIR shape can be imposed despite strong multipath propagation and without entailing a reduced received signal strength. First, a programmable metasurface suitable for integration in the on-chip environment (“on-chip reconfigurable intelligent surface”) is designed and characterized. Second, its configuration is optimized to equalize selected wireless on-chip channels “over the air.” Third, by conducting a rigorous communication analysis, the feasibility of significantly higher modulation speeds with shaped CIRs is evidenced. The results introduce a programmability paradigm to WNoCs which boosts their competitiveness as complementary on-chip interconnect solution., S.A. was supported by the European Commission through the H2020 FET-OPEN program under grants No. 736876 and No. 863337., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking control for beam steering using hypersurfaces

  • Ashraf, Nouman
  • Lestas, Marios
  • Saeed, Taqwa
  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Pitsillides, Andreas
  • Liaskos, Christos
Hypersurface, a software defined metasurface (SDM) paradigm constitutes a revolutionary technology aiming at offering programmatic control over all aspects of a propagating wave, altering its direction, power, polarization and phase. In the absence of line of sight (LOS) between a transmitter and a receiver, HSF can provide seamless connectivity via programmatic reflection. However, such an application requires fine tuning of the metasurface reconfiguration parameters, which may not be effective when done in an open loop fashion due to model uncertainties. In this work, we consider a feedback-based formulation of the problem, which involves maximization of the received power and propose the use of Extremum Seeking Control (ESC) for the controller implementation due to fact that it is model-free and adheres to the maximization problem. Extensive simulations indicate that the proposed scheme is successful in guiding the impinging wave to the receiver within reasonable time even in the presence of time varying delays incurred by message propagation. In addition, a discrete time implementation is considered, investigating its limitations as we increase the sampling time while also characterizing the traffic within the controller network., This work was funded by the European Union via the Horizon 2020: Future Emerging Topics call (FETOPEN), grant EU736876, project VISORSURF (http://www.visorsurf.eu)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

The scaling laws of HyperSurfaces

  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Saeed, Taqwa
  • Pitsillides, Andreas
  • Tsilipakos, Odysseas
  • Liaskos, Christos
  • Tasolamprou, Anna
  • Kafesaki, Maria
  • Pitilakis, Alexandros
  • Kantartzis, Nikolaos V.
  • Soteriou, Vassos
  • Lestas, Marios
State-of-the-art, flat structures called metasurfaces can filter and steer light and sound, render an object completely invisible to electromagnetic waves, and much more. They can deliver automation, remote operation, and advanced performance to a wide variety of existing systems, with applications in communications, medical imaging, sensing, and security. However, for non-specialists, individual metasurfaces are currently restricted to limited reusability and accessibility. This book brings together various scientific disciplines with the aim of outlining a programmable 'plug-and-play' metasurface. The book focuses on a recently proposed platform - known as the HyperSurface - that provides many electromagnetic functions of metasurfaces in a single structure, which can be controlled and reconfigured by software. This revolutionary approach paves the way for new opportunities in wireless communications and programmable wireless environments: HyperSurfaces could link networks with objects and physical environments and create smarter systems that are far more responsive to user demands. Walls that absorb radiation or block digital eavesdropping, and wireless, long-distance charging of devices are among the many possibilities. The book aspires to provide the foundational knowledge for creating an Internet of Materials, enabling smart environments at any scale - from indoor wireless communications to medical imaging equipment. Although the set of disciplines involved covers a considerable span, we hope that the material will benefit experts and students alike., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Computing and communications for the software-defined metamaterial paradigm: a context analysis

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Liaskos, Christos
  • Tsioliaridou, Ageliki
  • Ioannidis, Sotiris
  • Pitsillides, Andreas
  • Solé Pareta, Josep|||0000-0002-9411-6308
  • Alarcón Gallo, Eduardo
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
Metamaterials are artificial structures that have recently enabled the realization of novel electromagnetic components with engineered and even unnatural functionalities. Existing metamaterials are specifically designed for a single application working under preset conditions (e.g., electromagnetic cloaking for a fixed angle of incidence) and cannot be reused. Software-defined metamaterials (SDMs) are a much sought-after paradigm shift, exhibiting electromagnetic properties that can be reconfigured at runtime using a set of software primitives. To enable this new technology, SDMs require the integration of a network of controllers within the structure of the metamaterial, where each controller interacts locally and communicates globally to obtain the programmed behavior. The design approach for such controllers and the interconnection network, however, remains unclear due to the unique combination of constraints and requirements of the scenario. To bridge this gap, this paper aims to provide a context analysis from the computation and communication perspectives. Then, analogies are drawn between the SDM scenario and other applications both at the micro and nano scales, identifying possible candidates for the implementation of the controllers and the intra-SDM network. Finally, the main challenges of SDMs related to computing and communications are outlined., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Radiation pattern prediction for metasurfaces: A neural network-based approach

  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Jain, Akshay|||0000-0002-6986-2720
  • Timoneda i Comas, Xavier
  • Liaskos, Christos
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
As the current standardization for the 5G networks nears completion, work towards understanding the potential technologies for the 6G wireless networks is already underway. One of these potential technologies for the 6G networks is reconfigurable intelligent surfaces. They offer unprecedented degrees of freedom towards engineering the wireless channel, i.e., the ability to modify the characteristics of the channel whenever and however required. Nevertheless, such properties demand that the response of the associated metasurface is well understood under all possible operational conditions. While an understanding of the radiation pattern characteristics can be obtained through either analytical models or full-wave simulations, they suffer from inaccuracy and extremely high computational complexity, respectively. Hence, in this paper, we propose a neural network-based approach that enables a fast and accurate characterization of the metasurface response. We analyze multiple scenarios and demonstrate the capabilities and utility of the proposed methodology. Concretely, we show that this method can learn and predict the parameters governing the reflected wave radiation pattern with an accuracy of a full-wave simulation (98.8–99.8%) and the time and computational complexity of an analytical model. The aforementioned result and methodology will be of specific importance for the design, fault tolerance, and maintenance of the thousands of reconfigurable intelligent surfaces that will be deployed in the 6G network environment., This research was funded by the European Commission grant number H2020-FETOPEN736876 (VISORSURF) and by ICREA under the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Localization in power-constrained terahertz-operating software-defined metamaterials

  • Lemic, Filip
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Han, Chong
  • Marquez-Barja, Johann
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Famaey, Jeroen
Software-Defined Metamaterials (SDMs) show a strong potential for advancing the engineered control of electromagnetic waves. As such, they are envisioned to enable a variety of exciting applications, among others in the domains of smart textiles, high-resolution structural monitoring, and sensing in challenging environments. Many of the applications envisage deformations of the SDM structures, such as their bending, stretching or rolling, which implies that the locations of metamaterial elements will be changing relative to one another. In this paper, we argue that if the metamaterial elements would be accurately localizable, this location information could potentially be utilized for enabling novel SDM applications, as well as for optimizing the control of the elements themselves. To enable their localization, we assume that these elements are controlled wirelessly through a Terahertz (THz)-operating nanonetwork. We consider the elements to be power-constrained, with their sole powering option being to harvest energy from different environmental sources. By means of simulation, we demonstrate sub-millimeter accuracy of the two-way Time of Flight (ToF)-based localization, as well as high availability of the service (i.e., consistently more than 80% of the time), which is a result of the low energy consumed in the localization process. Finally, we qualitatively characterize the latency of the proposed localization service, as well as outline several challenges and future research directions., This work was supported by the EU Marie Curie Actions Individual Fellowship, Belgium (MSCA IF) project Scalable Localization-enabled In-body Terahertz Nanonetwork (SCaLeITN), grant nr. 893760. Filip Lemic’s research stay at the Terahertz Wireless Communications Lab at Shanghai Jiao Tong University, China was supported by the Research Foundation - Flanders (FWO), Belgium in the form of a grant for a long stay abroad (grant nr. V406320N). This work also received support from the European Union via the Horizon 2020 Future Emerging Topics call (FETOPEN, grant no. 736876)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Workload characterization of programmable metasurfaces

  • Saeed, Taqwa
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Liaskos, Christos
  • Pitsillides, Andreas
  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Lestas, Marios
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
Metasurfaces are envisaged to play a key role in next-generation wireless systems due to their powerful control over electromagnetic waves. The last decade has witnessed huge advances in this regard, shifting from static to programmable metasurfaces. The HyperSurface (HSF) paradigm takes one step further by integrating a network of controllers within the device with the aim of adding intelligence, connectivity, and autonomy. However, little is known about the traffic that this network will have to support as the target electromagnetic function or boundary conditions change. In this paper, we lay down the foundations of a methodology to characterize the workload of programmable metasurfaces and then employ it to analyze the case of beam steering HSFs. We observe that traffic is bursty and highly dependent on the position of the target. These results will enable the early-stage evaluation of intra-HSF networks, as well as the estimation of the system performance and cost., This work was supported by the European Union’s Horizon 2020 research and innovation programme-Future Emerging Topics (FETOPEN) under grant agreement No 736876., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Graphene-based terahertz antennas for area-constrained applications

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Hosseininejad, Seyed Ehsan
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene is enabling a plethora of applications in a wide range of fields due to its unique electrical, mechanical, and optical properties. In the realm of wireless communications, graphene shows great promise for the implementation of miniaturized and tunable antennas in the terahertz band. These unique advantages open the door to disruptive wireless applications in highly integrated scenarios where conventional communications means cannot be employed. In this paper, recent advances in plasmonic graphene antennas are presented. Wireless Network-on-Chip (WNoC) and Software-Defined Metamaterials (SDMs), two new area-constrained applications uniquely suited to the characteristics of graphene antennas, are then described. The challenges in terms of antenna design and channel characterization are outlined for both case scenarios., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Engineer the channel and adapt to it: enabling wireless intra-chip communication

  • Timoneda, Xavier
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Franques, Antonio
  • Manessis, Dionyssios
  • Zhou, Jin
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The authors gratefully acknowledge support from the Spanish MINECO under grant PCIN-2015-012, from the EU’s H2020 FET-OPEN program under grants No. 736876 and No. 863337, and by the Catalan Institution for Research and Advanced Studies (ICREA)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Programmable metamaterials for software-defined electromagnetic control: circuits, systems, and architectures

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Cui, Tie-Jun
  • Low, Tony
  • Georgiou, Julius
Metamaterials and their two-dimensional analogues, metasurfaces, have recently attracted enormous attention because of their powerful control over electromagnetic (EM) waves from microwave to visible range. Moreover, by introducing explicit control of its sub-wavelength unit cells, a metamaterial can become programmable. Programmable metamaterials may not only host multiple EM functionalities that can be chosen or combined through simple software directives, but also be provided with means to adapt to the environment or communicate with other metamaterials, thereby enabling a myriad of applications in sensing, imaging, or communications. The realization of such a software-driven cyber-physical vision comes, however, at the cost of significant hardware requirements. In this paper, recent progress in the field of programmable metasurfaces is reviewed, cutting across layers from the application down to the device and technology levels. The main aim is to present the current status, main benefits, and key challenges of this thriving research area with a tutorial spirit and from a hardware perspective., This work was supported by the EuropeanCommission under Grant H2020-736876-VISORSURF, and in part by theNational Key Research and Development Program of China under Grant2017YFA0700201, Grant 2017YFA0700202, and Grant 2017YFA0700203.This article was recommended by Guest Editor A. Wu., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Error analysis of programmable metasurfaces for beam steering

  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Georgiou, Julius
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Recent years have seen the emergence of programmable metasurfaces, where the user can modify the electromagnetic (EM) response of the device via software. Adding reconfigurability to the already powerful EM capabilities of metasurfaces opens the door to novel cyber-physical systems with exciting applications in domains such as holography, cloaking, or wireless communications. This paradigm shift, however, comes with a non-trivial increase of the complexity of the metasurfaces that will pose new reliability challenges stemming from the need to integrate tuning, control, and communication resources to implement the programmability. While metasurfaces will become prone to failures, little is known about their tolerance to errors. To bridge this gap, this paper examines the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and exemplified for beam steering, which constitutes a relevant case for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 20% can still be considered acceptable., This work has been supported by the European Commission under grant H2020-FETOPEN-736876 (VISORSURF) and by ICREA under the ICREA Academia programme. The person and base station icons in Figure 1 were created by Jens Tärningand Clea Doltz from the Noun Project., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Millimeter-wave propagation within a computer chip package

  • Timoneda, Xavier
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Manessis, Dionyssios
  • Zhou, Jin
  • Franques, Antonio
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. The WNoC paradigm has been extensively analyzed from the physical, network and architecture perspectives assuming mmWave band operation. However, there has not been a comprehensive study at this band for realistic chip packages and, thus, the characteristics of such wireless channel remain not fully understood. This work addresses this issue by accurately modeling a flip-chip package and investigating the wave propagation inside it. Through parametric studies, a locally optimal configuration for 60 GHz WNoC is obtained, showing that chip-wide attenuation below 32.6 dB could be achieved with standard processes. Finally, the applicability of the methodology is discussed for higher bands and other integrated environments such as a Software-Defined Metamaterial (SDM)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reprogrammable graphene-based metasurface mirror with adaptive focal point for THz imaging

  • Hosseininejad, Seyed Ehsan
  • Rouhi, Kasra
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
Recent emergence of metasurfaces has enabled the development of ultra-thin flat optical components through different wavefront shaping techniques at various wavelengths. However, due to the non-adaptive nature of conventional metasurfaces, the focal point of the resulting optics needs to be fixed at the design stage, thus severely limiting its reconfigurability and applicability. In this paper, we aim to overcome such constraint by presenting a flat reflective component that can be reprogrammed to focus terahertz waves at a desired point in the near-field region. To this end, we first propose a graphene-based unit cell with phase reconfigurability, and then employ the coding metasurface approach to draw the phase profile required to set the focus on the target point. Our results show that the proposed component can operate close to the diffraction limit with high focusing range and low focusing error. We also demonstrate that, through appropriate automation, the reprogrammability of the metamirror could be leveraged to develop compact terahertz scanning and imaging systems, as well as novel reconfigurable components for terahertz wireless communications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Survey on terahertz nanocommunication and networking: A top-down perspective

  • Lemic, Filip
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Tavernier, Wouter
  • Stroobant, Pieter
  • Colle, Didier
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Marquez-Barja, Johann
  • Famaey, Jeroen
Recent developments in nanotechnology herald nanometer-sized devices expected to bring light to a number of groundbreaking applications. Communication with and among nanodevices will be needed for unlocking the full potential of such applications. As the traditional communication approaches cannot be directly applied in nanocommunication, several alternative paradigms have emerged. Among them, electromagnetic nanocommunication in the terahertz (THz) frequency band is particularly promising, mainly due to the breakthrough of novel materials such as graphene. For this reason, numerous research efforts are nowadays targeting THz band nanocommunication and consequently nanonetworking. As it is expected that these trends will continue in the future, we see it beneficial to summarize the current status in these research domains. In this survey, we therefore aim to provide an overview of the current THz nanocommunication and nanonetworking research. Specifically, we discuss the applications envisioned to be supported by nanonetworks operating in the THz band, together with the requirements such applications pose on the underlying nanonetworks. Subsequently, we provide an overview of the current contributions on the different layers of the protocol stack, as well as the available channel models and experimentation tools. Finally, we identify a number of open research challenges and outline several future research directions., The author Filip Lemic was supported by the EU Marie Skłodowska-Curie Actions Individual Fellowships (MSCAIF) project Scalable Localization-enabled In-body Terahertz Nanonetwork (SCaLeITN, grant nr. 893760). The author Pieter Stroobant was supported by a PhD grant of Ghent University’s Special Research Fund (BOF). This work was partly funded by the Ghent University’s BOF/GOA project “Autonomic Networked Multimedia Systems”. This work was also supported by the Spanish Ministry of Economy and Competitiveness under contract TEC2017-90034-C2-1-R (ALLIANCE project) that receives funding from FEDER, and by the European Commission under grants No. 736876 and No. 863337., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Channel characterization for chip-scale wireless communications within computing packages

  • Timoneda i Comas, Xavier
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Manessis, Dionyssios
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. WNoC takes advantage of an overlaid network composed by a set of millimeter-wave antennas to reduce latency and increase throughput in the communication between cores. Similarly, wireless inter-chip communication has been also proposed to improve the information transfer between processors, memory, and accelerators in multi-chip settings. However, the wireless channel remains largely unknown in both scenarios, especially in the presence of realistic chip packages. This work addresses the issue by accurately modeling flip-chip packages and investigating the propagation both its interior and its surroundings. Through parametric studies, package configurations that minimize path loss are obtained and the trade-offs observed when applying such optimizations are discussed. Single-chip and multi-chip architectures are compared in terms of the path loss exponent, confirming that the amount of bulk silicon found in the pathway between transmitter and receiver is the main determinant of losses., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Intelligent beam steering for wireless communication using programmable metasurfaces

  • Ashraf, Nouman
  • Saeed, Taqwa
  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Vassiliou, Vasos
  • Liaskos, Christos
  • Pitsillides, Andreas
  • Lestas, Marios
Reconfigurable Intelligent Surfaces (RIS) are well established as a promising solution to the blockage problem in millimeter-wave (mm-wave) and terahertz (THz) communications, envisioned to serve demanding networking applications, such as 6G and vehicular. HyperSurfaces (HSF) is a revolutionary enabling technology for RIS, complementing Software Defined Metasurfaces (SDM) with an embedded network of controllers to enhance intelligence and autonomous operation in wireless networks. In this work, we consider feedback-based autonomous reconfiguration of the HSF controller states to establish a reliable communication channel between a transmitter and a receiver via programmable reflection on the HSF when Line-of-sight (LoS) between them is absent. The problem is to regulate the angle of reflection on the metasurface such that the power at the receiver is maximized. Extremum Seeking Control (ESC) is employed with the control signals generated mapped into appropriate metasurface coding signals which are communicated to the controllers via the embedded controller network (CN). This information dissemination process incurs delays which can compromise the stability of the feedback system and are thus accounted for in the performance evaluation. Extensive simulation results demonstrate the effectiveness of the proposed method to maximize the power at the receiver within a reasonable time even when the latter is mobile. The spatiotemporal nature of the traffic for different sampling periods is also characterized., This work was supported in part by the European Union through the Horizon 2020: Future Emerging Topics Call (FETOPEN), under Grant EU736876; in part by the Project VISORSURF (http://www.visorsurf.eu), Research and Innovation Programme, under Agreement 739578; and in part by the Government of the Republic of Cyprus through the Directorate General for European Programmes, Coordination, and Development., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Scalability analysis of programmable metasurfaces for beam steering

  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Pitilakis, Alexandros
  • Tsilipakos, Odysseas
  • Tasolamprou, Anna
  • Liaskos, Christos
  • Kafesaki, Maria
  • Kantartzis, Nikolaos V.
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
Programmable metasurfaces have garnered significant attention as they confer unprecedented control over the electromagnetic (EM) response of any surface. Such feature has given rise to novel design paradigms such as Software-Defined Metamaterials (SDM) and Reconfigurable Intelligent Surfaces (RIS) with multiple groundbreaking applications. However, the development of programmable metasurfaces tailored to the particularities of a potentially large application pool becomes a daunting task because the design space becomes remarkably large. This paper aims to ease the design process by proposing a methodology that employs a semi-analytical formulation to model the response of a metasurface and, then, derives performance scaling trends as functions of a representative set of design and application-specific variables. Although the methodology is amenable to any EM functionality, this paper explores its use for the case of beam steering at 26 GHz for 5G applications. Conventional beam steering metrics are evaluated as functions of the unit cell size, number of unit cell states, and metasurface size for different incidence and reflection angles. It is shown that metasurfaces 5¿×5¿ or larger with unit cells of ¿/3 and four unit cell states ensure good performance overall. Further, it is demonstrated that performance degrades significantly for angles larger than ¿>60o and that, to combat this, extra effort is needed in the development of the unit cell. These performance trends, when combined with power and cost models, will pave the way to optimal metasurface dimensioning., This work was supported in part by the European Commission (VISORSURF) under Grant H2020-FETOPEN-736876, and in part by Catalan Institution for Research and Advanced Studies (ICREA) through the ICREA Academia Programme. Odysseas Tsilipakos acknowledges support by the Stavros Niarchos Foundation within the framework of the project Advancing Young Researchers Human Capital in Cutting Edge Technologies in the Preservation of Cultural Heritage and the Tackling of Societal Challenges (ARCHERS)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

ABSense: sensing electromagnetic waves on metasurfaces via ambient compilation of full absorption

  • Liaskos, Christos
  • Pyrialakos, Georgios
  • Pitilakis, Alexandros
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Tsioliaridou, Ageliki
  • Tasolamprou, Anna
  • Tsilipakos, Odysseas
  • Kantartzis, Nikolaos V.
  • Ioannidis, Sotiris
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Kafesaki, Maria
  • Pitsillides, Andreas
  • Kossifos, Kypros
  • Georgiou, Julius
  • Akyildiz, Ian
Metasurfaces (MS) constitute effective media for manipulating and transforming impinging EM waves. Related studies have explored a series of impactful MS capabilities and applications in areas such as wireless communications, medical imaging and energy harvesting. A key-gap in the existing body of work is that the attributes of the EM waves to-be-controlled (e.g., direction, polarization, phase) are known in advance. The present work proposes a solution to the EM wave sensing problem using the intelligent and networked MS counterparts-the HyperSurfaces (HSFs), without requiring dedicated field sensors. An nano-network embedded within the HSF iterates over the possible MS configurations, finding the one that fully absorbs the impinging EM wave, hence maximizing the energy distribution within the HSF. Using a distributed consensus approach, the nano-network then matches the found configuration to the most probable EM wave traits, via a static lookup table that can be created during the HSF manufacturing. Realistic simulations demonstrate the potential of the novel scheme. Moreover, we show that the proposed workflow is also an ambient EM compiler, i.e., an autonomic HSF that translates high-level EM objectives to corresponding, low-level EM actuation commands., This work was funded by the European Union via the Horizon 2020: Future Emerging Topics call (FETOPEN), grant EU736876, project VISORSURF (http://www.visorsurf.eu)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

MAC-oriented programmable terahertz PHY via graphene-based Yagi-Uda antennas

  • Hosseininejad, Seyed Ehsan
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Lemme, Max
  • Suessmeier, Christoph
  • Bolívar, Peter Haring
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene is enabling a plethora of applications in a wide range of fields due to its unique electrical, mechanical, and optical properties. In the realm of wireless communications, graphene shows great promise for the implementation of miniaturized and tunable antennas in the terahertz band. These unique advantages open the door to new reconfigurable antenna structures which, in turn, enable novel communication protocols at different levels of the stack. This paper explores both aspects by, first, presenting a terahertz Yagi-Uda-like antenna concept that achieves reconfiguration both in frequency and beam direction simultaneously. Then, a programmable antenna controller design is proposed to expose the reconfigurability to the PHY and MAC layers, and several examples of its applicability are given. The performance and cost of the proposed scheme is evaluated through full-wave simulations and comparative analysis, demonstrating reconfigurability at nanosecond granularity with overheads below 0.02 mm2and 0.2 mW., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Opportunistic beamforming in wireless network-on-chip

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Marruedo, Adrián
  • Franques, Antonio
  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Zhou, Jin
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Wireless Network-on-Chip (WNoC) has emerged as a promising alternative to conventional interconnect fabrics at the chip scale. Since WNoCs may imply the close integration of antennas, one of the salient challenges in this scenario is the management of coupling and interferences. This paper, instead of combating coupling, aims to take advantage of close integration to create arrays within a WNoC. The proposed solution is opportunistic as it attempts to exploit the existing infrastructure to build a simple reconfigurable beamforming scheme. Full-wave simulations show that, despite the effects of lossy silicon and nearby antennas, within-package arrays achieve moderate gains and beamwidths below 90°, a figure which is already relevant in the multiprocessor context., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Exploration of intercell wireless millimeter-wave communication in the landscape of intelligent metasurfaces

  • Tasolamprou, Anna
  • Pitilakis, Alexandros
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Tsilipakos, Odysseas
  • Timoneda, Xavier
  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Mirmoosa, Mohammad Sajjad
  • Liu, Fu
  • Liaskos, Christos
  • Tsioliaridou, Ageliki
  • Ioannidis, Sotiris
  • Kantartzis, Nikolaos V.
  • Manessis, Dionyssios
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
Software-defined metasurfaces are electromagnetically ultra-thin, artificial components thatcan provide engineered and externally controllable functionalities. The control over these functionalities isenabled by the metasurface tunability, which is implemented by embedded electronic circuits that modifylocally the surface resistance and reactance. Integrating controllers within the metasurface able them tointercommunicate and adaptively reconfigure, thus imparting a desired electromagnetic operation, opens thepath towards the creation of an artificially intelligent (AI) fabric where each unit cell can have its own sensing,programmable computing, and actuation facilities. In this work we take a crucial step towards bringing theAI metasurface technology to emerging applications, in particular exploring the wireless mm-wave intercellcommunication capabilities in a software-defined HyperSurface designed for operation in the microwaveregime. We examine three different wireless communication channels within the landscape of the reflectivemetasurface: Firstly, in the layer where the control electronics of the HyperSurface lie, secondly inside adedicated layer enclosed between two metallic plates, and, thirdly, inside the metasurface itself. For each casewe examine the physical implementation of the mm-wave transceiver nodes, we quantify communicationchannel metrics, and we identify complexity vs. performance trade-offs., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of a plasmonic graphene antenna for microelectronic applications

  • Suessrneier, C.
  • Thiel, F.
  • Wigger, Anna K.
  • Bolívar, Peter Haring
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Banszcrus, L.
  • Stampfer, C.
  • Lemme, M.
Graphene offers a large potential to downscale antennas to the micrometer scale, due to its special dispersion relation and its ability to support plasmons in the THz frequency range. For an adequate performance of the antenna, graphene material quality is crucial. A high chemical potential, as well as a high relaxation time are needed. Fabrication and processing, as well as the material environment are very critical to achieve a high graphene quality and a good emissivity of the antenna. We demonstrate the simulation, fabrication and analysis of a graphene based plasmonic antenna structure acting as an active THz emission device., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Toward intelligent metasurfaces: the progress from globally tunable metasurfaces to software-defined metasurfaces with an embedded network of controllers

  • Tsilipakos, Odysseas
  • Tasolamprou, Anna
  • Pitilakis, Alexandros
  • Liu, Fu
  • Wang, Xuchen
  • Mirmoosa, Mohammad Sajjad
  • Tzarouchis, Dimitrios C.
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Liaskos, Christos
  • Tsioliaridou, Ageliki
  • Georgiou, Julius
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Ioannidis, Sotiris
  • Pitsillides, Andreas
  • Akyildiz, Ian
  • Kantartzis, Nikolaos V.
  • Economou, Eleftherios
  • Soukoulis, Costas
  • Kafesaki, Maria
  • Tretyakov, Sergei
Metasurfaces, the ultrathin, 2D version of metamaterials, have recently attracted a surge of attention for their capability to manipulate electromagnetic waves. Recent advances in reconfigurable and programmable metasurfaces have greatly extended their scope and reach into practical applications. Such functional sheet materials can have enormous impact on imaging, communication, and sensing applications, serving as artificial skins that shape electromagnetic fields. Motivated by these opportunities, this progress report provides a review of the recent advances in tunable and reconfigurable metasurfaces, highlighting the current challenges and outlining directions for future research. To better trace the historical evolution of tunable metasurfaces, a classification into globally and locally tunable metasurfaces is first provided along with the different physical addressing mechanisms utilized. Subsequently, coding metasurfaces, a particular class of locally tunable metasurfaces in which each unit cell can acquire discrete response states, is surveyed, since it is naturally suited to programmatic control. Finally, a new research direction of software-defined metasurfaces is described, which attempts to push metasurfaces toward unprecedented levels of functionality by harnessing the opportunities offered by their software interface as well as their inter- and intranetwork connectivity and establish them in real-world applications., This work was supported by the European Union’s Horizon 2020 research and innovation programme-Future Emerging Topics (FETOPEN) under grant agreement No 736876 (VISORSURF). Financial support by the National Priorities Research Program grant No. NPRP9-383-1-083 from the Qatar National Research Fund is also acknowledged. O.T. acknowledges the financial support of the Stavros Niarchos Foundation within the framework of the project ARCHERS (“Advancing Young Researchers’ Human Capital in Cutting Edge Technologies in the Preservation of Cultural Heritage and the Tackling of Societal Challenges”)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Terahertz dielectric resonator antenna coupled to graphene plasmonic dipole

  • Hosseininejad, Seyed Ehsan
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Lemme, Max
  • Bolívar, Peter Haring
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
This paper presents an efficient approach for exciting a dielectric resonator antenna (DRA) in the terahertz frequencies by means of a graphene plasmonic dipole. Design and analysis are performed in two steps. First, the propagation properties of hybrid plasmonic one-dimensional and two-dimensional structures are obtained by using transfer matrix theory and the finite-element method. The coupling amount between the plasmonic graphene mode and the dielectric wave mode is explored based on different parameters. These results, together with DRA and plasmonic antenna theory, are then used to design a DRA antenna that supports the TEy 112 mode at 2.4 THz and achieves a gain (IEEE) of up to 7 dBi and a radiation efficiency of up 70%. This gain is 6.5 dB higher than that of the graphene dipole alone and achieved with a moderate area overhead, demonstrating the value of the proposed structure., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fault tolerance in programmable metasurfaces: the beam steering case

  • Taghvaee, Hamidreza|||0000-0001-8732-6086
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Georgiou, Julius
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
Metasurfaces, the two-dimensional counterpart of metamaterials, have caught great attention thanks to their powerful control over electromagnetic waves. Recent times have seen the emergence of a variety of metasurfaces exhibiting not only countless functionalities, but also a reconfigurable or even programmable response. Reconfigurability, however, entails the integration of tuning and control circuits within the metasurface structure and, as this new paradigm moves forward, new reliability challenges may arise. This paper examines, for the first time, the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and instantiated for beam steering, which constitutes a relevant example for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 10% can still be considered acceptable., This work has been supported by the European Commission under grant H2020-FETOPEN-736876 (VISORSURF) and by ICREA under the ICREA Academia programme., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Medium access control in wireless network-on-chip: a context analysis

  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Mestres Sugrañes, Albert|||0000-0001-5332-8606
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José|||0000-0001-7663-7153
  • Cabellos Aparicio, Alberto|||0000-0001-9329-7584
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Wireless on-chip communication is a promising candidate to address the performance and efficiency issues that arise when scaling current NoC techniques to manycore processors. A WNoC can serve global and broadcast traffic with ultra-low latency even in thousand-core chips, thus acting as a natural complement to conventional and throughput-oriented wireline NoCs. However, the development of MAC strategies needed to efficiently share the wireless medium among the increasing number of cores remains a considerable challenge given the singularities of the environment and the novelty of the research area. In this position article, we present a context analysis describing the physical constraints, performance objectives, and traffic characteristics of the on-chip communication paradigm. We summarize the main differences with respect to traditional wireless scenarios, and then discuss their implications on the design of MAC protocols for manycore WNoC, with the ultimate goal of kickstarting this arguably unexplored research area., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Towards fault adaptive routing in metasurface controller networks

  • Kouzapas, Dimitrios
  • Skitsas, Constantinos
  • Saeed, Taqwa
  • Soteriou, Vassos
  • Lestas, Marios
  • Philippou, Anna
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Liaskos, Christos
  • Petrou, Loukas
  • Georgiou, Julius
  • Pitsillides, Andreas
<2019>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, HyperSurfaces (HSFs) comprise structurally reconfigurable metasurfaces whose electromagnetic properties can be changed via a software interface, using an embedded miniaturized network of controllers, enabling novel capabilities in wireless communications, including 5G applications. Resource constraints associated with a hardware testbed of this breakthrough technology, currently under development, necessitate an interconnect architecture of a Network of Controllers (CN) that is distinct from, yet reminiscent to, those of conventional Network-on-Chip (NoC) architectures. To meet the purposes of our HSF testbed, we rationalize the construction of an irregular topology where its controllers are interconnected in a Manhattan-like geometry, with the flow of control directives conducted in a handshaking mode, and routing operated by an XY-YX algorithm that is agnostic of the CN connectivity, determined following the results of model specification and model checking techniques. With such controllers prone to the appearance of permanent faults, threatening the operation of such HSFs, we propose, develop and evaluate two fault adaptive routing algorithms aiming to enhance the successful delivery of packetized control directives to their recipients: (1) Loop Free Algorithm (LFA), and (2) Reliable Delivery Algorithm (RDA) of deterministic and probabilistic variants. LFA and RDA are developed based on utilizing said topology-agnostic XY-YX routing algorithm as a base, along with an appropriate adoption of routing turn rules, to address said HSF CN challenges that deviate from traditional fault tolerant routing algorithms seen in NoCs. Experimental evaluation results obtained using a custom developed simulator, show that probabilistic RDA exhibits top performance in terms of successful packet delivery ratio and topology coverage, albeit at the expense of a higher path hop count. Pointers in addressing tradeoffs between HSF CN performance and resource utilization are also provided., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Toward dynamically adapting wireless intra-chip channels to traffic needs with a programmable metasurface

  • Imani, Mohammadreza
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Del Hougne, Philipp
We introduce the idea of endowing on-chip wireless propagation environments with in-situ programmability by equipping the chip package with a programmable metasurface. The limitations of current wired chip interconnect fabrics present a serious performance bottleneck for multi-core chips. Wireless links between far-apart cores are a promising complementary link technique but struggle with the complex on-chip propagation environment presenting strong multipath effects. We expect that these challenges can be addressed with the ability to shape wireless channels between far-apart cores and to dynamically adapt them to traffic needs; for instance, by tailoring the impulse response between two wireless nodes, it may be feasible to prevent inter-symbol interference. Here, we present our recent progress toward this goal, including an analysis of the on-chip propagation environment, an efficient design of programmable meta-atoms suitable for the on-chip environment and operating in the 60 GHz regime, and a detailed discussion of different single-channel and multi-channel use-case scenarios., S.A. acknowledges support from the European Commission throughthe H2020 FET-OPEN program under grants No. 736876 and No. 863337, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Toward localization in terahertz-operating energy harvesting software-defined metamaterials: context analysis

  • Lemic, Filip
  • Abadal Cavallé, Sergi|||0000-0003-0941-0260
  • Famaey, Jeroen
Software-defined metamaterials (SDMs) represent a novel paradigm for real-time control of metamaterials. SDMs are envisioned to enable a variety of exciting applications in the domains such as smart textiles and sensing in challenging conditions. Many of these applications envisage deformations of the SDM structure (e.g., rolling, bending, stretching). This affects the relative position of the metamaterial elements and requires their localization relative to each other. The question of how to perform such localization is, however, yet to spark in the community. We consider that the metamaterial elements are controlled wirelessly through a Terahertz (THz)-operating nanonetwork. Moreover, we consider the elements to be energy constrained, with their sole powering option being to harvest environmental energy. For such a setup, we demonstrate sub-millimeter accuracy of the two-way Time of Flight (ToF)-based localization, as well as high availability of the service (i.e., consistently more than 80% of the time), which is a result of the low energy consumed in localization. Finally, we provide the localization context for a number of relevant system parameters such as operational frequency, bandwidth, and harvesting rate., The author Filip Lemic was supported by the EU Marie Curie Actions Individual Fellowship project Scalable Localization-enabled Inbody Terahertz Nanonetwork (SCaLeITN), grant nr. 893760. In addition, this work received support from the University of Antwerp’s University Research Fund (BOF). This work also received funding from the European Union via the Horizon 2020 Future Emerging Topics call (FETOPEN), grant no. 736876., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Scalability analysis of programmable metasurfaces for beam steering

  • Taghvaee, Hamidreza
  • Abadal Cavallé, Sergi
  • Pitilakis, Alexandros
  • Tsilipakos, Odysseas
  • Tasolamprou, Anna
  • Liaskos, Christos
  • Kafesaki, Maria
  • Kantartzis, Nikolaos V.
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
Programmable metasurfaces have garnered significant attention as they confer unprecedented control over the electromagnetic (EM) response of any surface. Such feature has given rise to novel design paradigms such as Software-Defined Metamaterials (SDM) and Reconfigurable Intelligent Surfaces (RIS) with multiple groundbreaking applications. However, the development of programmable metasurfaces tailored to the particularities of a potentially large application pool becomes a daunting task because the design space becomes remarkably large. This paper aims to ease the design process by proposing a methodology that employs a semi-analytical formulation to model the response of a metasurface and, then, derives performance scaling trends as functions of a representative set of design and application-specific variables. Although the methodology is amenable to any EM functionality, this paper explores its use for the case of beam steering at 26 GHz for 5G applications. Conventional beam steering metrics are evaluated as functions of the unit cell size, number of unit cell states, and metasurface size for different incidence and reflection angles. It is shown that metasurfaces 5¿×5¿ or larger with unit cells of ¿/3 and four unit cell states ensure good performance overall. Further, it is demonstrated that performance degrades significantly for angles larger than ¿>60o and that, to combat this, extra effort is needed in the development of the unit cell. These performance trends, when combined with power and cost models, will pave the way to optimal metasurface dimensioning., This work was supported in part by the European Commission (VISORSURF) under Grant H2020-FETOPEN-736876, and in part by Catalan Institution for Research and Advanced Studies (ICREA) through the ICREA Academia Programme. Odysseas Tsilipakos acknowledges support by the Stavros Niarchos Foundation within the framework of the project Advancing Young Researchers Human Capital in Cutting Edge Technologies in the Preservation of Cultural Heritage and the Tackling of Societal Challenges (ARCHERS)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Millimeter-wave propagation within a computer chip package

  • Timoneda, Xavier
  • Abadal Cavallé, Sergi
  • Cabellos Aparicio, Alberto
  • Manessis, Dionyssios
  • Zhou, Jin
  • Franques, Antonio
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. The WNoC paradigm has been extensively analyzed from the physical, network and architecture perspectives assuming mmWave band operation. However, there has not been a comprehensive study at this band for realistic chip packages and, thus, the characteristics of such wireless channel remain not fully understood. This work addresses this issue by accurately modeling a flip-chip package and investigating the wave propagation inside it. Through parametric studies, a locally optimal configuration for 60 GHz WNoC is obtained, showing that chip-wide attenuation below 32.6 dB could be achieved with standard processes. Finally, the applicability of the methodology is discussed for higher bands and other integrated environments such as a Software-Defined Metamaterial (SDM)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exploration of intercell wireless millimeter-wave communication in the landscape of intelligent metasurfaces

  • Tasolamprou, Anna
  • Pitilakis, Alexandros
  • Abadal Cavallé, Sergi
  • Tsilipakos, Odysseas
  • Timoneda, Xavier
  • Taghvaee, Hamidreza
  • Mirmoosa, Mohammad Sajjad
  • Liu, Fu
  • Liaskos, Christos
  • Tsioliaridou, Ageliki
  • Ioannidis, Sotiris
  • Kantartzis, Nikolaos V.
  • Manessis, Dionyssios
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
Software-defined metasurfaces are electromagnetically ultra-thin, artificial components thatcan provide engineered and externally controllable functionalities. The control over these functionalities isenabled by the metasurface tunability, which is implemented by embedded electronic circuits that modifylocally the surface resistance and reactance. Integrating controllers within the metasurface able them tointercommunicate and adaptively reconfigure, thus imparting a desired electromagnetic operation, opens thepath towards the creation of an artificially intelligent (AI) fabric where each unit cell can have its own sensing,programmable computing, and actuation facilities. In this work we take a crucial step towards bringing theAI metasurface technology to emerging applications, in particular exploring the wireless mm-wave intercellcommunication capabilities in a software-defined HyperSurface designed for operation in the microwaveregime. We examine three different wireless communication channels within the landscape of the reflectivemetasurface: Firstly, in the layer where the control electronics of the HyperSurface lie, secondly inside adedicated layer enclosed between two metallic plates, and, thirdly, inside the metasurface itself. For each casewe examine the physical implementation of the mm-wave transceiver nodes, we quantify communicationchannel metrics, and we identify complexity vs. performance trade-offs., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Radiation pattern prediction for metasurfaces: A neural network-based approach

  • Taghvaee, Hamidreza
  • Jain, Akshay
  • Timoneda i Comas, Xavier
  • Liaskos, Christos
  • Abadal Cavallé, Sergi
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
As the current standardization for the 5G networks nears completion, work towards understanding the potential technologies for the 6G wireless networks is already underway. One of these potential technologies for the 6G networks is reconfigurable intelligent surfaces. They offer unprecedented degrees of freedom towards engineering the wireless channel, i.e., the ability to modify the characteristics of the channel whenever and however required. Nevertheless, such properties demand that the response of the associated metasurface is well understood under all possible operational conditions. While an understanding of the radiation pattern characteristics can be obtained through either analytical models or full-wave simulations, they suffer from inaccuracy and extremely high computational complexity, respectively. Hence, in this paper, we propose a neural network-based approach that enables a fast and accurate characterization of the metasurface response. We analyze multiple scenarios and demonstrate the capabilities and utility of the proposed methodology. Concretely, we show that this method can learn and predict the parameters governing the reflected wave radiation pattern with an accuracy of a full-wave simulation (98.8–99.8%) and the time and computational complexity of an analytical model. The aforementioned result and methodology will be of specific importance for the design, fault tolerance, and maintenance of the thousands of reconfigurable intelligent surfaces that will be deployed in the 6G network environment., This research was funded by the European Commission grant number H2020-FETOPEN736876 (VISORSURF) and by ICREA under the ICREA Academia program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Toward localization in terahertz-operating energy harvesting software-defined metamaterials: context analysis

  • Lemic, Filip
  • Abadal Cavallé, Sergi
  • Famaey, Jeroen
Software-defined metamaterials (SDMs) represent a novel paradigm for real-time control of metamaterials. SDMs are envisioned to enable a variety of exciting applications in the domains such as smart textiles and sensing in challenging conditions. Many of these applications envisage deformations of the SDM structure (e.g., rolling, bending, stretching). This affects the relative position of the metamaterial elements and requires their localization relative to each other. The question of how to perform such localization is, however, yet to spark in the community. We consider that the metamaterial elements are controlled wirelessly through a Terahertz (THz)-operating nanonetwork. Moreover, we consider the elements to be energy constrained, with their sole powering option being to harvest environmental energy. For such a setup, we demonstrate sub-millimeter accuracy of the two-way Time of Flight (ToF)-based localization, as well as high availability of the service (i.e., consistently more than 80% of the time), which is a result of the low energy consumed in localization. Finally, we provide the localization context for a number of relevant system parameters such as operational frequency, bandwidth, and harvesting rate., The author Filip Lemic was supported by the EU Marie Curie Actions Individual Fellowship project Scalable Localization-enabled Inbody Terahertz Nanonetwork (SCaLeITN), grant nr. 893760. In addition, this work received support from the University of Antwerp’s University Research Fund (BOF). This work also received funding from the European Union via the Horizon 2020 Future Emerging Topics call (FETOPEN), grant no. 736876., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Data conversion in area-constrained applications: the wireless network-on-chip case

  • Abadal Cavallé, Sergi
  • Alarcón Cot, Eduardo José
Network-on-Chip (NoC) is currently the paradigm of choice to interconnect the different components of System-on-Chips (SoCs) or Chip Multiprocessors (CMPs). As the levels of integration continue to grow, however, current NoCs face significant scalability limitations and have prompted research in novel interconnect technologies. Among these, wireless intra-chip communications have been under intense scrutiny due to their low latency broadcast and architectural flexibility. Thus far, the practicality of the idea has been studied from the RF front-end and the network interface perspectives, whereas little to no attention has been placed on another essential component: the data converters. This article aims to fill this gap by providing a comprehensive analysis of the requirements of the scenario, as well as of the current performance and cost trends of Analog-to-Digital Converters (ADCs). Based on Murmann's data, we demonstrate that ADCs will not be a roadblock for the realization of wireless intra-chip communications although current designs do not meet their demands fully., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

ABSense: sensing electromagnetic waves on metasurfaces via ambient compilation of full absorption

  • Liaskos, Christos
  • Pyrialakos, Georgios
  • Pitilakis, Alexandros
  • Abadal Cavallé, Sergi
  • Tsioliaridou, Ageliki
  • Tasolamprou, Anna
  • Tsilipakos, Odysseas
  • Kantartzis, Nikolaos V.
  • Ioannidis, Sotiris
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
  • Kafesaki, Maria
  • Pitsillides, Andreas
  • Kossifos, Kypros
  • Georgiou, Julius
  • Akyildiz, Ian
Metasurfaces (MS) constitute effective media for manipulating and transforming impinging EM waves. Related studies have explored a series of impactful MS capabilities and applications in areas such as wireless communications, medical imaging and energy harvesting. A key-gap in the existing body of work is that the attributes of the EM waves to-be-controlled (e.g., direction, polarization, phase) are known in advance. The present work proposes a solution to the EM wave sensing problem using the intelligent and networked MS counterparts-the HyperSurfaces (HSFs), without requiring dedicated field sensors. An nano-network embedded within the HSF iterates over the possible MS configurations, finding the one that fully absorbs the impinging EM wave, hence maximizing the energy distribution within the HSF. Using a distributed consensus approach, the nano-network then matches the found configuration to the most probable EM wave traits, via a static lookup table that can be created during the HSF manufacturing. Realistic simulations demonstrate the potential of the novel scheme. Moreover, we show that the proposed workflow is also an ambient EM compiler, i.e., an autonomic HSF that translates high-level EM objectives to corresponding, low-level EM actuation commands., This work was funded by the European Union via the Horizon 2020: Future Emerging Topics call (FETOPEN), grant EU736876, project VISORSURF (http://www.visorsurf.eu)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Engineer the channel and adapt to it: enabling wireless intra-chip communication

  • Timoneda, Xavier
  • Abadal Cavallé, Sergi
  • Franques, Antonio
  • Manessis, Dionyssios
  • Zhou, Jin
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The authors gratefully acknowledge support from the Spanish MINECO under grant PCIN-2015-012, from the EU’s H2020 FET-OPEN program under grants No. 736876 and No. 863337, and by the Catalan Institution for Research and Advanced Studies (ICREA)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Toward intelligent metasurfaces: the progress from globally tunable metasurfaces to software-defined metasurfaces with an embedded network of controllers

  • Tsilipakos, Odysseas
  • Tasolamprou, Anna
  • Pitilakis, Alexandros
  • Liu, Fu
  • Wang, Xuchen
  • Mirmoosa, Mohammad Sajjad
  • Tzarouchis, Dimitrios C.
  • Abadal Cavallé, Sergi
  • Taghvaee, Hamidreza
  • Liaskos, Christos
  • Tsioliaridou, Ageliki
  • Georgiou, Julius
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
  • Ioannidis, Sotiris
  • Pitsillides, Andreas
  • Akyildiz, Ian
  • Kantartzis, Nikolaos V.
  • Economou, Eleftherios
  • Soukoulis, Costas
  • Kafesaki, Maria
  • Tretyakov, Sergei
Metasurfaces, the ultrathin, 2D version of metamaterials, have recently attracted a surge of attention for their capability to manipulate electromagnetic waves. Recent advances in reconfigurable and programmable metasurfaces have greatly extended their scope and reach into practical applications. Such functional sheet materials can have enormous impact on imaging, communication, and sensing applications, serving as artificial skins that shape electromagnetic fields. Motivated by these opportunities, this progress report provides a review of the recent advances in tunable and reconfigurable metasurfaces, highlighting the current challenges and outlining directions for future research. To better trace the historical evolution of tunable metasurfaces, a classification into globally and locally tunable metasurfaces is first provided along with the different physical addressing mechanisms utilized. Subsequently, coding metasurfaces, a particular class of locally tunable metasurfaces in which each unit cell can acquire discrete response states, is surveyed, since it is naturally suited to programmatic control. Finally, a new research direction of software-defined metasurfaces is described, which attempts to push metasurfaces toward unprecedented levels of functionality by harnessing the opportunities offered by their software interface as well as their inter- and intranetwork connectivity and establish them in real-world applications., This work was supported by the European Union’s Horizon 2020 research and innovation programme-Future Emerging Topics (FETOPEN) under grant agreement No 736876 (VISORSURF). Financial support by the National Priorities Research Program grant No. NPRP9-383-1-083 from the Qatar National Research Fund is also acknowledged. O.T. acknowledges the financial support of the Stavros Niarchos Foundation within the framework of the project ARCHERS (“Advancing Young Researchers’ Human Capital in Cutting Edge Technologies in the Preservation of Cultural Heritage and the Tackling of Societal Challenges”)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Survey on terahertz nanocommunication and networking: A top-down perspective

  • Lemic, Filip
  • Abadal Cavallé, Sergi
  • Tavernier, Wouter
  • Stroobant, Pieter
  • Colle, Didier
  • Alarcón Cot, Eduardo José
  • Marquez-Barja, Johann
  • Famaey, Jeroen
Recent developments in nanotechnology herald nanometer-sized devices expected to bring light to a number of groundbreaking applications. Communication with and among nanodevices will be needed for unlocking the full potential of such applications. As the traditional communication approaches cannot be directly applied in nanocommunication, several alternative paradigms have emerged. Among them, electromagnetic nanocommunication in the terahertz (THz) frequency band is particularly promising, mainly due to the breakthrough of novel materials such as graphene. For this reason, numerous research efforts are nowadays targeting THz band nanocommunication and consequently nanonetworking. As it is expected that these trends will continue in the future, we see it beneficial to summarize the current status in these research domains. In this survey, we therefore aim to provide an overview of the current THz nanocommunication and nanonetworking research. Specifically, we discuss the applications envisioned to be supported by nanonetworks operating in the THz band, together with the requirements such applications pose on the underlying nanonetworks. Subsequently, we provide an overview of the current contributions on the different layers of the protocol stack, as well as the available channel models and experimentation tools. Finally, we identify a number of open research challenges and outline several future research directions., The author Filip Lemic was supported by the EU Marie Skłodowska-Curie Actions Individual Fellowships (MSCAIF) project Scalable Localization-enabled In-body Terahertz Nanonetwork (SCaLeITN, grant nr. 893760). The author Pieter Stroobant was supported by a PhD grant of Ghent University’s Special Research Fund (BOF). This work was partly funded by the Ghent University’s BOF/GOA project “Autonomic Networked Multimedia Systems”. This work was also supported by the Spanish Ministry of Economy and Competitiveness under contract TEC2017-90034-C2-1-R (ALLIANCE project) that receives funding from FEDER, and by the European Commission under grants No. 736876 and No. 863337., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards fault adaptive routing in metasurface controller networks

  • Kouzapas, Dimitrios
  • Skitsas, Constantinos
  • Saeed, Taqwa
  • Soteriou, Vassos
  • Lestas, Marios
  • Philippou, Anna
  • Abadal Cavallé, Sergi
  • Liaskos, Christos
  • Petrou, Loukas
  • Georgiou, Julius
  • Pitsillides, Andreas
<2019>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, HyperSurfaces (HSFs) comprise structurally reconfigurable metasurfaces whose electromagnetic properties can be changed via a software interface, using an embedded miniaturized network of controllers, enabling novel capabilities in wireless communications, including 5G applications. Resource constraints associated with a hardware testbed of this breakthrough technology, currently under development, necessitate an interconnect architecture of a Network of Controllers (CN) that is distinct from, yet reminiscent to, those of conventional Network-on-Chip (NoC) architectures. To meet the purposes of our HSF testbed, we rationalize the construction of an irregular topology where its controllers are interconnected in a Manhattan-like geometry, with the flow of control directives conducted in a handshaking mode, and routing operated by an XY-YX algorithm that is agnostic of the CN connectivity, determined following the results of model specification and model checking techniques. With such controllers prone to the appearance of permanent faults, threatening the operation of such HSFs, we propose, develop and evaluate two fault adaptive routing algorithms aiming to enhance the successful delivery of packetized control directives to their recipients: (1) Loop Free Algorithm (LFA), and (2) Reliable Delivery Algorithm (RDA) of deterministic and probabilistic variants. LFA and RDA are developed based on utilizing said topology-agnostic XY-YX routing algorithm as a base, along with an appropriate adoption of routing turn rules, to address said HSF CN challenges that deviate from traditional fault tolerant routing algorithms seen in NoCs. Experimental evaluation results obtained using a custom developed simulator, show that probabilistic RDA exhibits top performance in terms of successful packet delivery ratio and topology coverage, albeit at the expense of a higher path hop count. Pointers in addressing tradeoffs between HSF CN performance and resource utilization are also provided., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Programmable metasurfaces: state of the art and prospects

  • Liu, Fu
  • Pitilakis, Alexandros
  • Mirmoosa, Mohammad Sajjad
  • Tsilipakos, Odysseas
  • Wang, Xuchen
  • Tasolamprou, Anna
  • Abadal Cavallé, Sergi
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
  • Liaskos, Christos
  • Kantartzis, Nikolaos V.
  • Kafesaki, Maria
  • Economou, Eleftherios
  • Soukoulis, Costas
  • Tretyakov, Sergei
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Metasurfaces, ultrathin and planar electromagnetic devices with sub-wavelength unit cells, have recently attracted enormous attention for their powerful control over electromagnetic waves, from microwave to visible range. With tunability added to the unit cells, the programmable metasurfaces enable us to benefit from multiple unique functionalities controlled by external stimuli. In this review paper, we will discuss the recent progress in the field of programmable metasurfaces and elaborate on different approaches to realize them, with the tunability from global aspects, to local aspects, and to software-defined metasurfaces., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Graphene-based terahertz antennas for area-constrained applications

  • Abadal Cavallé, Sergi
  • Hosseininejad, Seyed Ehsan
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene is enabling a plethora of applications in a wide range of fields due to its unique electrical, mechanical, and optical properties. In the realm of wireless communications, graphene shows great promise for the implementation of miniaturized and tunable antennas in the terahertz band. These unique advantages open the door to disruptive wireless applications in highly integrated scenarios where conventional communications means cannot be employed. In this paper, recent advances in plasmonic graphene antennas are presented. Wireless Network-on-Chip (WNoC) and Software-Defined Metamaterials (SDMs), two new area-constrained applications uniquely suited to the characteristics of graphene antennas, are then described. The challenges in terms of antenna design and channel characterization are outlined for both case scenarios., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reprogrammable graphene-based metasurface mirror with adaptive focal point for THz imaging

  • Hosseininejad, Seyed Ehsan
  • Rouhi, Kasra
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Cabellos Aparicio, Alberto
  • Abadal Cavallé, Sergi
  • Alarcón Cot, Eduardo José
Recent emergence of metasurfaces has enabled the development of ultra-thin flat optical components through different wavefront shaping techniques at various wavelengths. However, due to the non-adaptive nature of conventional metasurfaces, the focal point of the resulting optics needs to be fixed at the design stage, thus severely limiting its reconfigurability and applicability. In this paper, we aim to overcome such constraint by presenting a flat reflective component that can be reprogrammed to focus terahertz waves at a desired point in the near-field region. To this end, we first propose a graphene-based unit cell with phase reconfigurability, and then employ the coding metasurface approach to draw the phase profile required to set the focus on the target point. Our results show that the proposed component can operate close to the diffraction limit with high focusing range and low focusing error. We also demonstrate that, through appropriate automation, the reprogrammability of the metamirror could be leveraged to develop compact terahertz scanning and imaging systems, as well as novel reconfigurable components for terahertz wireless communications., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Intelligent beam steering for wireless communication using programmable metasurfaces

  • Ashraf, Nouman
  • Saeed, Taqwa
  • Taghvaee, Hamidreza
  • Abadal Cavallé, Sergi
  • Vassiliou, Vasos
  • Liaskos, Christos
  • Pitsillides, Andreas
  • Lestas, Marios
Reconfigurable Intelligent Surfaces (RIS) are well established as a promising solution to the blockage problem in millimeter-wave (mm-wave) and terahertz (THz) communications, envisioned to serve demanding networking applications, such as 6G and vehicular. HyperSurfaces (HSF) is a revolutionary enabling technology for RIS, complementing Software Defined Metasurfaces (SDM) with an embedded network of controllers to enhance intelligence and autonomous operation in wireless networks. In this work, we consider feedback-based autonomous reconfiguration of the HSF controller states to establish a reliable communication channel between a transmitter and a receiver via programmable reflection on the HSF when Line-of-sight (LoS) between them is absent. The problem is to regulate the angle of reflection on the metasurface such that the power at the receiver is maximized. Extremum Seeking Control (ESC) is employed with the control signals generated mapped into appropriate metasurface coding signals which are communicated to the controllers via the embedded controller network (CN). This information dissemination process incurs delays which can compromise the stability of the feedback system and are thus accounted for in the performance evaluation. Extensive simulation results demonstrate the effectiveness of the proposed method to maximize the power at the receiver within a reasonable time even when the latter is mobile. The spatiotemporal nature of the traffic for different sampling periods is also characterized., This work was supported in part by the European Union through the Horizon 2020: Future Emerging Topics Call (FETOPEN), under Grant EU736876; in part by the Project VISORSURF (http://www.visorsurf.eu), Research and Innovation Programme, under Agreement 739578; and in part by the Government of the Republic of Cyprus through the Directorate General for European Programmes, Coordination, and Development., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Error analysis of programmable metasurfaces for beam steering

  • Taghvaee, Hamidreza
  • Cabellos Aparicio, Alberto
  • Georgiou, Julius
  • Abadal Cavallé, Sergi
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Recent years have seen the emergence of programmable metasurfaces, where the user can modify the electromagnetic (EM) response of the device via software. Adding reconfigurability to the already powerful EM capabilities of metasurfaces opens the door to novel cyber-physical systems with exciting applications in domains such as holography, cloaking, or wireless communications. This paradigm shift, however, comes with a non-trivial increase of the complexity of the metasurfaces that will pose new reliability challenges stemming from the need to integrate tuning, control, and communication resources to implement the programmability. While metasurfaces will become prone to failures, little is known about their tolerance to errors. To bridge this gap, this paper examines the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and exemplified for beam steering, which constitutes a relevant case for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 20% can still be considered acceptable., This work has been supported by the European Commission under grant H2020-FETOPEN-736876 (VISORSURF) and by ICREA under the ICREA Academia programme. The person and base station icons in Figure 1 were created by Jens Tärningand Clea Doltz from the Noun Project., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Workload characterization of programmable metasurfaces

  • Saeed, Taqwa
  • Abadal Cavallé, Sergi
  • Liaskos, Christos
  • Pitsillides, Andreas
  • Taghvaee, Hamidreza
  • Cabellos Aparicio, Alberto
  • Lestas, Marios
  • Alarcón Cot, Eduardo José
Metasurfaces are envisaged to play a key role in next-generation wireless systems due to their powerful control over electromagnetic waves. The last decade has witnessed huge advances in this regard, shifting from static to programmable metasurfaces. The HyperSurface (HSF) paradigm takes one step further by integrating a network of controllers within the device with the aim of adding intelligence, connectivity, and autonomy. However, little is known about the traffic that this network will have to support as the target electromagnetic function or boundary conditions change. In this paper, we lay down the foundations of a methodology to characterize the workload of programmable metasurfaces and then employ it to analyze the case of beam steering HSFs. We observe that traffic is bursty and highly dependent on the position of the target. These results will enable the early-stage evaluation of intra-HSF networks, as well as the estimation of the system performance and cost., This work was supported by the European Union’s Horizon 2020 research and innovation programme-Future Emerging Topics (FETOPEN) under grant agreement No 736876., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Toward dynamically adapting wireless intra-chip channels to traffic needs with a programmable metasurface

  • Imani, Mohammadreza
  • Abadal Cavallé, Sergi
  • Del Hougne, Philipp
We introduce the idea of endowing on-chip wireless propagation environments with in-situ programmability by equipping the chip package with a programmable metasurface. The limitations of current wired chip interconnect fabrics present a serious performance bottleneck for multi-core chips. Wireless links between far-apart cores are a promising complementary link technique but struggle with the complex on-chip propagation environment presenting strong multipath effects. We expect that these challenges can be addressed with the ability to shape wireless channels between far-apart cores and to dynamically adapt them to traffic needs; for instance, by tailoring the impulse response between two wireless nodes, it may be feasible to prevent inter-symbol interference. Here, we present our recent progress toward this goal, including an analysis of the on-chip propagation environment, an efficient design of programmable meta-atoms suitable for the on-chip environment and operating in the 60 GHz regime, and a detailed discussion of different single-channel and multi-channel use-case scenarios., S.A. acknowledges support from the European Commission throughthe H2020 FET-OPEN program under grants No. 736876 and No. 863337, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Metasurface-programmable wireless network-on-chip

  • Imani, Mohammadreza
  • Abadal Cavallé, Sergi
  • Del Hougne, Philipp
This paper introduces the concept of smart radio environments, currently intensely studied for wireless communication in metasurface-programmable meter-scaled environments (e.g., inside rooms), on the chip scale. Wireless networks-on-chips (WNoCs) are a candidate technology to improve inter-core communication on chips but current proposals are plagued by a dilemma: either the received signal is weak, or it is significantly reverberated such that the on–off-keying modulation speed must be throttled. Here, this vexing problem is overcome by endowing the wireless on-chip environment with in situ programmability which enables the shaping of the channel impulse response (CIR); thereby, a pulse-like CIR shape can be imposed despite strong multipath propagation and without entailing a reduced received signal strength. First, a programmable metasurface suitable for integration in the on-chip environment (“on-chip reconfigurable intelligent surface”) is designed and characterized. Second, its configuration is optimized to equalize selected wireless on-chip channels “over the air.” Third, by conducting a rigorous communication analysis, the feasibility of significantly higher modulation speeds with shaped CIRs is evidenced. The results introduce a programmability paradigm to WNoCs which boosts their competitiveness as complementary on-chip interconnect solution., S.A. was supported by the European Commission through the H2020 FET-OPEN program under grants No. 736876 and No. 863337., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A general, fault tolerant, adaptive, deadlock-free routing protocol for network-on-chip

  • Stroobant, Pieter
  • Abadal Cavallé, Sergi
  • Tavernier, Wouter
  • Alarcón Cot, Eduardo José
  • Colle, Didier
  • Pickavet, Mario
The paper presents a topology-agnostic greedy protocol for network-on-chip routing. The proposed routing algorithm can tolerate any number of permanent faults, and is proven to be deadlock-free. We introduce a specialized variant of the algorithm, which is optimized for 2D mesh networks, both flat and wireless. The adaptiveness and minimality of several variants this algorithm are analyzed through graph-based simulations., P. Stroobant is funded by a Ph.D. grant of Ghent University, Special Research Fund (BOF). S. Abadal and E. Alarcon gratefully acknowledge support by the European Commision under grant H2020-FETOPEN-736876 (VISORSURF)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

The scaling laws of HyperSurfaces

  • Taghvaee, Hamidreza
  • Abadal Cavallé, Sergi
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
  • Saeed, Taqwa
  • Pitsillides, Andreas
  • Tsilipakos, Odysseas
  • Liaskos, Christos
  • Tasolamprou, Anna
  • Kafesaki, Maria
  • Pitilakis, Alexandros
  • Kantartzis, Nikolaos V.
  • Soteriou, Vassos
  • Lestas, Marios
State-of-the-art, flat structures called metasurfaces can filter and steer light and sound, render an object completely invisible to electromagnetic waves, and much more. They can deliver automation, remote operation, and advanced performance to a wide variety of existing systems, with applications in communications, medical imaging, sensing, and security. However, for non-specialists, individual metasurfaces are currently restricted to limited reusability and accessibility. This book brings together various scientific disciplines with the aim of outlining a programmable 'plug-and-play' metasurface. The book focuses on a recently proposed platform - known as the HyperSurface - that provides many electromagnetic functions of metasurfaces in a single structure, which can be controlled and reconfigured by software. This revolutionary approach paves the way for new opportunities in wireless communications and programmable wireless environments: HyperSurfaces could link networks with objects and physical environments and create smarter systems that are far more responsive to user demands. Walls that absorb radiation or block digital eavesdropping, and wireless, long-distance charging of devices are among the many possibilities. The book aspires to provide the foundational knowledge for creating an Internet of Materials, enabling smart environments at any scale - from indoor wireless communications to medical imaging equipment. Although the set of disciplines involved covers a considerable span, we hope that the material will benefit experts and students alike., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Medium access control in wireless network-on-chip: a context analysis

  • Abadal Cavallé, Sergi
  • Mestres Sugrañes, Albert
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Wireless on-chip communication is a promising candidate to address the performance and efficiency issues that arise when scaling current NoC techniques to manycore processors. A WNoC can serve global and broadcast traffic with ultra-low latency even in thousand-core chips, thus acting as a natural complement to conventional and throughput-oriented wireline NoCs. However, the development of MAC strategies needed to efficiently share the wireless medium among the increasing number of cores remains a considerable challenge given the singularities of the environment and the novelty of the research area. In this position article, we present a context analysis describing the physical constraints, performance objectives, and traffic characteristics of the on-chip communication paradigm. We summarize the main differences with respect to traditional wireless scenarios, and then discuss their implications on the design of MAC protocols for manycore WNoC, with the ultimate goal of kickstarting this arguably unexplored research area., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Channel characterization for chip-scale wireless communications within computing packages

  • Timoneda i Comas, Xavier
  • Cabellos Aparicio, Alberto
  • Manessis, Dionyssios
  • Alarcón Cot, Eduardo José
  • Abadal Cavallé, Sergi
Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. WNoC takes advantage of an overlaid network composed by a set of millimeter-wave antennas to reduce latency and increase throughput in the communication between cores. Similarly, wireless inter-chip communication has been also proposed to improve the information transfer between processors, memory, and accelerators in multi-chip settings. However, the wireless channel remains largely unknown in both scenarios, especially in the presence of realistic chip packages. This work addresses the issue by accurately modeling flip-chip packages and investigating the propagation both its interior and its surroundings. Through parametric studies, package configurations that minimize path loss are obtained and the trade-offs observed when applying such optimizations are discussed. Single-chip and multi-chip architectures are compared in terms of the path loss exponent, confirming that the amount of bulk silicon found in the pathway between transmitter and receiver is the main determinant of losses., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fault tolerance in programmable metasurfaces: the beam steering case

  • Taghvaee, Hamidreza
  • Abadal Cavallé, Sergi
  • Georgiou, Julius
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
Metasurfaces, the two-dimensional counterpart of metamaterials, have caught great attention thanks to their powerful control over electromagnetic waves. Recent times have seen the emergence of a variety of metasurfaces exhibiting not only countless functionalities, but also a reconfigurable or even programmable response. Reconfigurability, however, entails the integration of tuning and control circuits within the metasurface structure and, as this new paradigm moves forward, new reliability challenges may arise. This paper examines, for the first time, the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and instantiated for beam steering, which constitutes a relevant example for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 10% can still be considered acceptable., This work has been supported by the European Commission under grant H2020-FETOPEN-736876 (VISORSURF) and by ICREA under the ICREA Academia programme., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Intercell wireless communication in software-defined metasurfaces

  • Tasolamprou, Anna
  • Mirmoosa, Mohammad Sajjad
  • Tsilipakos, Odysseas
  • Pitilakis, Alexandros
  • Liu, Fu
  • Abadal Cavallé, Sergi
  • Cabellos Aparicio, Alberto
  • Alarcón Cot, Eduardo José
  • Liaskos, Christos
  • Kantartzis, Nikolaos V.
  • Tretyakov, Sergei
  • Kafesaki, Maria
  • Economou, Eleftherios
  • Soukoulis, Costas
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Tunable metasurfaces are ultra-thin, artificial electromagnetic components that provide engineered and externally adjustable functionalities. The programmable metasurface, the HyperSurFace, concept consists in integrating controllers within the metasurface that interact locally and communicate globally to obtain a given electromagnetic behaviour. Here, we address the design constraints introduced by both functions accommodated by the programmable metasurface, i.e., the desired metasurface operation and the unit cells wireless communication enabling such programmable functionality. The design process for meeting both sets of specifications is thoroughly discussed. Two scenarios for wireless intercell communication are proposed. The first exploits the metasurface layer itself, while the second employs a dedicated communication layer beneath the metasurface backplane. Complexity and performance trade-offs are highlighted., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Computing and communications for the software-defined metamaterial paradigm: a context analysis

  • Abadal Cavallé, Sergi
  • Liaskos, Christos
  • Tsioliaridou, Ageliki
  • Ioannidis, Sotiris
  • Pitsillides, Andreas
  • Solé Pareta, Josep
  • Alarcón Gallo, Eduardo
  • Cabellos Aparicio, Alberto
Metamaterials are artificial structures that have recently enabled the realization of novel electromagnetic components with engineered and even unnatural functionalities. Existing metamaterials are specifically designed for a single application working under preset conditions (e.g., electromagnetic cloaking for a fixed angle of incidence) and cannot be reused. Software-defined metamaterials (SDMs) are a much sought-after paradigm shift, exhibiting electromagnetic properties that can be reconfigured at runtime using a set of software primitives. To enable this new technology, SDMs require the integration of a network of controllers within the structure of the metamaterial, where each controller interacts locally and communicates globally to obtain the programmed behavior. The design approach for such controllers and the interconnection network, however, remains unclear due to the unique combination of constraints and requirements of the scenario. To bridge this gap, this paper aims to provide a context analysis from the computation and communication perspectives. Then, analogies are drawn between the SDM scenario and other applications both at the micro and nano scales, identifying possible candidates for the implementation of the controllers and the intra-SDM network. Finally, the main challenges of SDMs related to computing and communications are outlined., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Terahertz dielectric resonator antenna coupled to graphene plasmonic dipole

  • Hosseininejad, Seyed Ehsan
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Abadal Cavallé, Sergi
  • Lemme, Max
  • Bolívar, Peter Haring
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
This paper presents an efficient approach for exciting a dielectric resonator antenna (DRA) in the terahertz frequencies by means of a graphene plasmonic dipole. Design and analysis are performed in two steps. First, the propagation properties of hybrid plasmonic one-dimensional and two-dimensional structures are obtained by using transfer matrix theory and the finite-element method. The coupling amount between the plasmonic graphene mode and the dielectric wave mode is explored based on different parameters. These results, together with DRA and plasmonic antenna theory, are then used to design a DRA antenna that supports the TEy 112 mode at 2.4 THz and achieves a gain (IEEE) of up to 7 dBi and a radiation efficiency of up 70%. This gain is 6.5 dB higher than that of the graphene dipole alone and achieved with a moderate area overhead, demonstrating the value of the proposed structure., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of a plasmonic graphene antenna for microelectronic applications

  • Suessrneier, C.
  • Thiel, F.
  • Wigger, Anna K.
  • Bolívar, Peter Haring
  • Abadal Cavallé, Sergi
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
  • Banszcrus, L.
  • Stampfer, C.
  • Lemme, M.
Graphene offers a large potential to downscale antennas to the micrometer scale, due to its special dispersion relation and its ability to support plasmons in the THz frequency range. For an adequate performance of the antenna, graphene material quality is crucial. A high chemical potential, as well as a high relaxation time are needed. Fabrication and processing, as well as the material environment are very critical to achieve a high graphene quality and a good emissivity of the antenna. We demonstrate the simulation, fabrication and analysis of a graphene based plasmonic antenna structure acting as an active THz emission device., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Localization in power-constrained terahertz-operating software-defined metamaterials

  • Lemic, Filip
  • Abadal Cavallé, Sergi
  • Han, Chong
  • Marquez-Barja, Johann
  • Alarcón Cot, Eduardo José
  • Famaey, Jeroen
Software-Defined Metamaterials (SDMs) show a strong potential for advancing the engineered control of electromagnetic waves. As such, they are envisioned to enable a variety of exciting applications, among others in the domains of smart textiles, high-resolution structural monitoring, and sensing in challenging environments. Many of the applications envisage deformations of the SDM structures, such as their bending, stretching or rolling, which implies that the locations of metamaterial elements will be changing relative to one another. In this paper, we argue that if the metamaterial elements would be accurately localizable, this location information could potentially be utilized for enabling novel SDM applications, as well as for optimizing the control of the elements themselves. To enable their localization, we assume that these elements are controlled wirelessly through a Terahertz (THz)-operating nanonetwork. We consider the elements to be power-constrained, with their sole powering option being to harvest energy from different environmental sources. By means of simulation, we demonstrate sub-millimeter accuracy of the two-way Time of Flight (ToF)-based localization, as well as high availability of the service (i.e., consistently more than 80% of the time), which is a result of the low energy consumed in the localization process. Finally, we qualitatively characterize the latency of the proposed localization service, as well as outline several challenges and future research directions., This work was supported by the EU Marie Curie Actions Individual Fellowship, Belgium (MSCA IF) project Scalable Localization-enabled In-body Terahertz Nanonetwork (SCaLeITN), grant nr. 893760. Filip Lemic’s research stay at the Terahertz Wireless Communications Lab at Shanghai Jiao Tong University, China was supported by the Research Foundation - Flanders (FWO), Belgium in the form of a grant for a long stay abroad (grant nr. V406320N). This work also received support from the European Union via the Horizon 2020 Future Emerging Topics call (FETOPEN, grant no. 736876)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Programmable metamaterials for software-defined electromagnetic control: circuits, systems, and architectures

  • Abadal Cavallé, Sergi
  • Cui, Tie-Jun
  • Low, Tony
  • Georgiou, Julius
Metamaterials and their two-dimensional analogues, metasurfaces, have recently attracted enormous attention because of their powerful control over electromagnetic (EM) waves from microwave to visible range. Moreover, by introducing explicit control of its sub-wavelength unit cells, a metamaterial can become programmable. Programmable metamaterials may not only host multiple EM functionalities that can be chosen or combined through simple software directives, but also be provided with means to adapt to the environment or communicate with other metamaterials, thereby enabling a myriad of applications in sensing, imaging, or communications. The realization of such a software-driven cyber-physical vision comes, however, at the cost of significant hardware requirements. In this paper, recent progress in the field of programmable metasurfaces is reviewed, cutting across layers from the application down to the device and technology levels. The main aim is to present the current status, main benefits, and key challenges of this thriving research area with a tutorial spirit and from a hardware perspective., This work was supported by the EuropeanCommission under Grant H2020-736876-VISORSURF, and in part by theNational Key Research and Development Program of China under Grant2017YFA0700201, Grant 2017YFA0700202, and Grant 2017YFA0700203.This article was recommended by Guest Editor A. Wu., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking control for beam steering using hypersurfaces

  • Ashraf, Nouman
  • Lestas, Marios
  • Saeed, Taqwa
  • Taghvaee, Hamidreza
  • Abadal Cavallé, Sergi
  • Pitsillides, Andreas
  • Liaskos, Christos
Hypersurface, a software defined metasurface (SDM) paradigm constitutes a revolutionary technology aiming at offering programmatic control over all aspects of a propagating wave, altering its direction, power, polarization and phase. In the absence of line of sight (LOS) between a transmitter and a receiver, HSF can provide seamless connectivity via programmatic reflection. However, such an application requires fine tuning of the metasurface reconfiguration parameters, which may not be effective when done in an open loop fashion due to model uncertainties. In this work, we consider a feedback-based formulation of the problem, which involves maximization of the received power and propose the use of Extremum Seeking Control (ESC) for the controller implementation due to fact that it is model-free and adheres to the maximization problem. Extensive simulations indicate that the proposed scheme is successful in guiding the impinging wave to the receiver within reasonable time even in the presence of time varying delays incurred by message propagation. In addition, a discrete time implementation is considered, investigating its limitations as we increase the sampling time while also characterizing the traffic within the controller network., This work was funded by the European Union via the Horizon 2020: Future Emerging Topics call (FETOPEN), grant EU736876, project VISORSURF (http://www.visorsurf.eu)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Opportunistic beamforming in wireless network-on-chip

  • Abadal Cavallé, Sergi
  • Marruedo, Adrián
  • Franques, Antonio
  • Taghvaee, Hamidreza
  • Cabellos Aparicio, Alberto
  • Zhou, Jin
  • Torrellas, Josep
  • Alarcón Cot, Eduardo José
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Wireless Network-on-Chip (WNoC) has emerged as a promising alternative to conventional interconnect fabrics at the chip scale. Since WNoCs may imply the close integration of antennas, one of the salient challenges in this scenario is the management of coupling and interferences. This paper, instead of combating coupling, aims to take advantage of close integration to create arrays within a WNoC. The proposed solution is opportunistic as it attempts to exploit the existing infrastructure to build a simple reconfigurable beamforming scheme. Full-wave simulations show that, despite the effects of lossy silicon and nearby antennas, within-package arrays achieve moderate gains and beamwidths below 90°, a figure which is already relevant in the multiprocessor context., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

MAC-oriented programmable terahertz PHY via graphene-based Yagi-Uda antennas

  • Hosseininejad, Seyed Ehsan
  • Abadal Cavallé, Sergi
  • Neshat, Mohammad
  • Faraji-Dana, Reza
  • Lemme, Max
  • Suessmeier, Christoph
  • Bolívar, Peter Haring
  • Alarcón Cot, Eduardo José
  • Cabellos Aparicio, Alberto
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Graphene is enabling a plethora of applications in a wide range of fields due to its unique electrical, mechanical, and optical properties. In the realm of wireless communications, graphene shows great promise for the implementation of miniaturized and tunable antennas in the terahertz band. These unique advantages open the door to new reconfigurable antenna structures which, in turn, enable novel communication protocols at different levels of the stack. This paper explores both aspects by, first, presenting a terahertz Yagi-Uda-like antenna concept that achieves reconfiguration both in frequency and beam direction simultaneously. Then, a programmable antenna controller design is proposed to expose the reconfigurability to the PHY and MAC layers, and several examples of its applicability are given. The performance and cost of the proposed scheme is evaluated through full-wave simulations and comparative analysis, demonstrating reconfigurability at nanosecond granularity with overheads below 0.02 mm2and 0.2 mW., Peer Reviewed, Postprint (published version)