Pasar al contenido principal

NUEVAS AVANCES DE LA GEOFISICA Y LA INGENIERIA APLICADOS A LA EVALUACION DEL RIESGO SISMICO

CGL2011-23621

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

High-rise unreinforced masonry buildings: influence of the floor system on the global seismic response

  • Jiménez Pacheco, Juan
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
The studies about the effects of the flexibility of the floor diaphragm on the seismic behavior of unreinforced masonry buildings (URM-buildings) have focused on low-rise buildings. It should be borne in mind, however, that high-rise residential buildings have become the most mainstream housing pattern in European cities. Generally, the plan of this type of buildings is stretched and exhibits a high degree of symmetry. In this context, this paper summarizes a study whose primary objectives were: 1) develop a model for nonlinear static analysis of high-rise URM-buildings considering the flexibility of the floor system, and 2) analyze the influence of the stiffening of the floor system on the global seismic response of such buildings. To this aim, a six-story building with a composite floor of iron beams and brick vaults (IBBV-floor), typical of the Eixample-Barcelona district (prototype-building), was adopted as a case study. The floor system was modeled as aggregation of diaphragm macro-elements. All macro-elements, those that constitute the walls as well as the floor system, were developed with spring-elements. The construction of the model followed a strategy of modeling and validation by stages, from the 2D equivalent frame model until the integral model of the prototype-building. The analysis of the influence of the stiffening of the floor system was based on the application of conventional stiffening methods on the IBBV-floor. On the basis of a sensitivity analysis, the study focused on three cases: 1) unstiffened original variant, 2) a selected stiffened variant, and 3) variant with rigid floor. The global seismic response was evaluated in terms of characteristics of pushover curves and the displaced configuration of the floors. The stiffening of the floor system induces on the prototype-building slight increases in the fundamental periods, slight to moderate increases in the base shear capacities and significant decreases in the displacement capacities. Finally, these outcomes are discussed and located in the context of the most recent works., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Spring-type elements model for non-linear static analysis of masonry buildings

  • Jiménez Pacheco, Juan
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
The use of analytical models based on a relatively small number of mechanical and geometrical parameters is very useful to provide a preliminary evaluation of the expected seismic performance and determine whether a more refined approach is necessary. In this context, the aim of this work is to develop a simplified model for nonlinear static analysis of unreinforced brick masonry (URM) walls. The proposed model fits within the equivalent frame approach with one-dimensional members and poses an alternative assembly of macro-elements describing the behavior of piers and spandrels. Such macro-elements are composed by springs: two end springs controlling the flexural behavior and a central spring responding to shear forces. As far as the non-linear modeling is concerned, original force-displacement relationships (FDRs) were implemented in terms of multilinear curves, in order to incorporate recent advances in the knowledge of strength degradation of the URM members. The proposed model was implemented in the Ruaumoko code and its reliability was tested by means of pushover analyses performed on three walls that have been widely used as benchmarks. The obtained pushover curves were compared with those reported by several authors, showing a good agreement in terms of elastic stiffness, base shear capacity and displacement capacity. In addition, in relation to one of the walls, the precision in the capture of the ultimate damage was discussed. The model implemented by using the Ruaumoko code, resulted simple and effective, and it has still room for improvement, so that this work poses possibilities of refinement, from the identification and discussion of their limitations., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Real aperture radar: an interferometric technique to assess earthquake damaged structures

  • Cabrera Velez, Esteban
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Luzi, Guido
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
Ambient vibration testing has become a useful tool to assess the operational conditions of any existing structure, and allows the engineers to maintain a continuous monitoring in order to check its structural health conditions. In this paper an experimental survey performed by means of an original interferometric technique applied on a real building damaged after the Mw 5.1, may 11th 2011, Lorca earthquake (southeast Spain) is presented and discussed. This interferometric technique, based on real aperture radar (RAR), allows an easy, non-invasive and contactless procedure to evaluate the dynamic response of a building excited by ambient vibration noise. Contemporaneously, a 3D computational model of the monitored structure has been developed and an equivalent non-linear static analysis has been performed. The capacity spectrum method and a specific fragility model were used in order to obtain a global damage index of the structure. A specific post process of the RAR output combined with the numerical analysis of the modelled structure should help to establish the damage condition of the building in the aforementioned specific post-earthquake scenario, in order to estimate the occupancy conditions. The results of the computational assessment are consistent with the observed damage and with the results of the experimental RAR survey. The consistency of the results allows considering the interferometric RAR technique as an interesting alternative, or, in any case, a complementary non-invasive prospecting tool to assess the structural health conditions in a post-earthquake scenario., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Esteban Cabrera, sponsored by the University of Azuay (UDA), obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

New capacity and energy based damage index

  • Díaz, Sergio Alberto
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: 1) the strain energy associated with the stiffness variation and the ductility of the structure, and 2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Damage Index for structures with elements of high flexural stiffness and/or brittle behavior

  • Hidalgo Leiva, Diego Antonio
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Díaz, Sergio Alberto
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pinzón Ureña, Luis|||0000-0003-3128-7158
Structures with high lateral stiffness and/or with brittle to semi-brittle elements in their lateral resistant system may exhibit a rapid decrease of their shear capacity and a sudden loss of stiffness when lateral cyclic loads, as those produced by earthquakes, are applied. This behavior can be related to damage (partial or complete) of a particular structural element. In this article, the expected seismic damage is analyzed and assessed in two different structures. The first one is a low-rise reinforced masonry structure, with hollow concrete blocks (2 stories); the second one is a high-rise dual reinforced concrete building (18 stories). In both cases, materials are characterized using a proper hysteresis model, which takes into account softening and shear degradation. To quantify the structural damage, the well-known Park and Ang damage index is used. The damage curves shown in this paper, exhibit a quick damage increase for relatively low-intensity values, which is attributed to nonlinear incursions of several structural elements with low ultimate ductility. However, incremental dynamic analyses are time-consuming; therefore, it becomes important to develop simplified methods, also successfully representing this kind of effects. A recently proposed damage index, which can be computed in an easy and straightforward way from capacity curves or capacity spectra, is modified in this work to include this fast strength degradation. Details of the computations of this new damage index are also described here., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Geometric- and non-geometric mean sensor-orientation-independent seismic intensities: application to the Italian strong motion database

  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Hidalgo Leiva, Diego Antonio
In this paper, the directionality effects of the as recoded ground motions are investigated. The Italian accelerometric archive (ITACA) is used for this purpose. A number of 949 horizontal ground motion records (two components) are used. The following measures, resulting from different ways of combining the maximum values (m1,m2) of the two horizontal components were investigated: Geometric Mean (GMRot), projection (Rot) of the two as recorded components onto all non-redundant azimuths and larger (LRot) value [max(m1,m2)]. The sensor-orientation-independent quantities: GMRotDpp, RotDpp, GMRotIpp and LRotDpp have been obtained. In these quantities, pp means percentile and D and I, respectively, mean dependent and independent of the period. The 50th percentiles values of these intensity measures were compared to the GM of the as-recorded components obtaining differences of 1% for GMRotD50 and in the ranges 2-6%, 1-2% and 15-27% respectively for RotD50, GMRotI50 and LRotD50. The three first ratios show a good agreement with similar studies in other regions. Moreover, the vector combination of the two orthogonal time histories (Root of the Sum of Squares, RSS) presents equal values as RotD100 and LRotD100. The study has also been performed by using the maxima of the time histories combinations; the following quantities are thus investigated: mGMRotDpp and mGMRotIpp, where m indicates peak values of the combined time histories. Our results indicate that the ratios between the 50th percentile of these orientation independent intensities and the GM of the as-recorded components, are in the ranges 0.78-0.85 and 0.79-0.86, respectively, proving that former ones are conservative., This research has been partially funded by the government of Spain (Ministry of Economy and Competitiveness –MINECO, in its Spanish acronym) and by the European Regional Development Fund (FEDER, in its Spanish acronym) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913 -P (MINECO / FEDER, UE).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

New capacity and energy based damage index

  • Díaz, Sergio Alberto
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Alva Bañuelos, Rodrigo Esteban
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: 1) the strain energy associated with the stiffness variation and the ductility of the structure, and 2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Damage Index for structures with elements of high flexural stiffness and/or brittle behavior

  • Hidalgo Leiva, Diego Antonio
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Díaz, Sergio Alberto
  • Vargas Alzate, Yeudy Felipe
  • Pinzón Ureña, Luis
Structures with high lateral stiffness and/or with brittle to semi-brittle elements in their lateral resistant system may exhibit a rapid decrease of their shear capacity and a sudden loss of stiffness when lateral cyclic loads, as those produced by earthquakes, are applied. This behavior can be related to damage (partial or complete) of a particular structural element. In this article, the expected seismic damage is analyzed and assessed in two different structures. The first one is a low-rise reinforced masonry structure, with hollow concrete blocks (2 stories); the second one is a high-rise dual reinforced concrete building (18 stories). In both cases, materials are characterized using a proper hysteresis model, which takes into account softening and shear degradation. To quantify the structural damage, the well-known Park and Ang damage index is used. The damage curves shown in this paper, exhibit a quick damage increase for relatively low-intensity values, which is attributed to nonlinear incursions of several structural elements with low ultimate ductility. However, incremental dynamic analyses are time-consuming; therefore, it becomes important to develop simplified methods, also successfully representing this kind of effects. A recently proposed damage index, which can be computed in an easy and straightforward way from capacity curves or capacity spectra, is modified in this work to include this fast strength degradation. Details of the computations of this new damage index are also described here., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Spring-type elements model for non-linear static analysis of masonry buildings

  • Jiménez Pacheco, Juan
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
The use of analytical models based on a relatively small number of mechanical and geometrical parameters is very useful to provide a preliminary evaluation of the expected seismic performance and determine whether a more refined approach is necessary. In this context, the aim of this work is to develop a simplified model for nonlinear static analysis of unreinforced brick masonry (URM) walls. The proposed model fits within the equivalent frame approach with one-dimensional members and poses an alternative assembly of macro-elements describing the behavior of piers and spandrels. Such macro-elements are composed by springs: two end springs controlling the flexural behavior and a central spring responding to shear forces. As far as the non-linear modeling is concerned, original force-displacement relationships (FDRs) were implemented in terms of multilinear curves, in order to incorporate recent advances in the knowledge of strength degradation of the URM members. The proposed model was implemented in the Ruaumoko code and its reliability was tested by means of pushover analyses performed on three walls that have been widely used as benchmarks. The obtained pushover curves were compared with those reported by several authors, showing a good agreement in terms of elastic stiffness, base shear capacity and displacement capacity. In addition, in relation to one of the walls, the precision in the capture of the ultimate damage was discussed. The model implemented by using the Ruaumoko code, resulted simple and effective, and it has still room for improvement, so that this work poses possibilities of refinement, from the identification and discussion of their limitations., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Real aperture radar: an interferometric technique to assess earthquake damaged structures

  • Cabrera Velez, Esteban
  • González Drigo, José Ramón
  • Luzi, Guido
  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
Ambient vibration testing has become a useful tool to assess the operational conditions of any existing structure, and allows the engineers to maintain a continuous monitoring in order to check its structural health conditions. In this paper an experimental survey performed by means of an original interferometric technique applied on a real building damaged after the Mw 5.1, may 11th 2011, Lorca earthquake (southeast Spain) is presented and discussed. This interferometric technique, based on real aperture radar (RAR), allows an easy, non-invasive and contactless procedure to evaluate the dynamic response of a building excited by ambient vibration noise. Contemporaneously, a 3D computational model of the monitored structure has been developed and an equivalent non-linear static analysis has been performed. The capacity spectrum method and a specific fragility model were used in order to obtain a global damage index of the structure. A specific post process of the RAR output combined with the numerical analysis of the modelled structure should help to establish the damage condition of the building in the aforementioned specific post-earthquake scenario, in order to estimate the occupancy conditions. The results of the computational assessment are consistent with the observed damage and with the results of the experimental RAR survey. The consistency of the results allows considering the interferometric RAR technique as an interesting alternative, or, in any case, a complementary non-invasive prospecting tool to assess the structural health conditions in a post-earthquake scenario., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Esteban Cabrera, sponsored by the University of Azuay (UDA), obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

High-rise unreinforced masonry buildings: influence of the floor system on the global seismic response

  • Jiménez Pacheco, Juan
  • González Drigo, José Ramón
  • Barbat Barbat, Horia Alejandro
  • Pujades Beneit, Lluís
The studies about the effects of the flexibility of the floor diaphragm on the seismic behavior of unreinforced masonry buildings (URM-buildings) have focused on low-rise buildings. It should be borne in mind, however, that high-rise residential buildings have become the most mainstream housing pattern in European cities. Generally, the plan of this type of buildings is stretched and exhibits a high degree of symmetry. In this context, this paper summarizes a study whose primary objectives were: 1) develop a model for nonlinear static analysis of high-rise URM-buildings considering the flexibility of the floor system, and 2) analyze the influence of the stiffening of the floor system on the global seismic response of such buildings. To this aim, a six-story building with a composite floor of iron beams and brick vaults (IBBV-floor), typical of the Eixample-Barcelona district (prototype-building), was adopted as a case study. The floor system was modeled as aggregation of diaphragm macro-elements. All macro-elements, those that constitute the walls as well as the floor system, were developed with spring-elements. The construction of the model followed a strategy of modeling and validation by stages, from the 2D equivalent frame model until the integral model of the prototype-building. The analysis of the influence of the stiffening of the floor system was based on the application of conventional stiffening methods on the IBBV-floor. On the basis of a sensitivity analysis, the study focused on three cases: 1) unstiffened original variant, 2) a selected stiffened variant, and 3) variant with rigid floor. The global seismic response was evaluated in terms of characteristics of pushover curves and the displaced configuration of the floors. The stiffening of the floor system induces on the prototype-building slight increases in the fundamental periods, slight to moderate increases in the base shear capacities and significant decreases in the displacement capacities. Finally, these outcomes are discussed and located in the context of the most recent works., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Geometric- and non-geometric mean sensor-orientation-independent seismic intensities: application to the Italian strong motion database

  • Pinzón Ureña, Luis
  • Pujades Beneit, Lluís
  • Hidalgo Leiva, Diego Antonio
In this paper, the directionality effects of the as recoded ground motions are investigated. The Italian accelerometric archive (ITACA) is used for this purpose. A number of 949 horizontal ground motion records (two components) are used. The following measures, resulting from different ways of combining the maximum values (m1,m2) of the two horizontal components were investigated: Geometric Mean (GMRot), projection (Rot) of the two as recorded components onto all non-redundant azimuths and larger (LRot) value [max(m1,m2)]. The sensor-orientation-independent quantities: GMRotDpp, RotDpp, GMRotIpp and LRotDpp have been obtained. In these quantities, pp means percentile and D and I, respectively, mean dependent and independent of the period. The 50th percentiles values of these intensity measures were compared to the GM of the as-recorded components obtaining differences of 1% for GMRotD50 and in the ranges 2-6%, 1-2% and 15-27% respectively for RotD50, GMRotI50 and LRotD50. The three first ratios show a good agreement with similar studies in other regions. Moreover, the vector combination of the two orthogonal time histories (Root of the Sum of Squares, RSS) presents equal values as RotD100 and LRotD100. The study has also been performed by using the maxima of the time histories combinations; the following quantities are thus investigated: mGMRotDpp and mGMRotIpp, where m indicates peak values of the combined time histories. Our results indicate that the ratios between the 50th percentile of these orientation independent intensities and the GM of the as-recorded components, are in the ranges 0.78-0.85 and 0.79-0.86, respectively, proving that former ones are conservative., This research has been partially funded by the government of Spain (Ministry of Economy and Competitiveness –MINECO, in its Spanish acronym) and by the European Regional Development Fund (FEDER, in its Spanish acronym) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913 -P (MINECO / FEDER, UE)., Postprint (published version)