Pasar al contenido principal

NUEVAS AVANCES DE LA GEOFISICA Y LA INGENIERIA APLICADOS A LA EVALUACION DEL RIESGO SISMICO

CGL2011-23621

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An efficient methodology to estimate probabilistic seismic damage curves

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Hurtado Gómez, Jorge Eduardo
The incremental dynamic analysis (IDA) is a powerful methodology that can be easily extended for calculating probabilistic seismic damage curves. These curves are metadata to assess the seismic risk of structures. Although this methodology requires a relevant computational effort, it should be the reference to correctly estimate the seismic risk of structures. Nevertheless, it would be of high practical interest to have a simpler methodology, based for instance on the pushover analysis (PA), to obtain similar results to those based on IDA. In this article, PA is used to obtain probabilistic seismic damage curves from the stiffness degradation and the energy of the nonlinear part of the capacity curve. A fully probabilistic methodology is tackled by means of Monte Carlo simulations with the purpose of establishing that the results based on the simplified proposed approach are compatible with those obtained with the IDA. Comparisons between the results of both approaches are included for a low- to midrise reinforced concrete building. The proposed methodology significantly reduces the computational effort when calculating probabilistic seismic damage curves., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An alternative approach to consider the effect of seismic directionality, Un enfoque alternativo para tomar en cuenta el efecto de la direccionalidad sísmica

  • Díaz Carrasco, Sergio
  • Pinzón, Luis A.
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
Recent researches have proven the importance of considering the seismic directionality effect. The performance of buildings subjected to earthquakes depends on its orientation respect to the seismic actions applied. This type of calculation is computed using the nonlinear dynamic analysis (NLDA) and rotating the acceleration horizontal components onto all non-redundant angles, which entails a high computational cost. This paper presents an alternative approach to consider the directionality effect. The method is based on the nonlinear static analysis (NLSA) and on the energy balance between the capacity curves and the response spectra of the rotated seismic actions. This approach was applied to a 4-story steel frame building 3D-model with ground motions records from Mexico City. A high variability in the building performance is observed due to the incidence angle of the seismic action; the proposed method would allow considering this variation in the structural analysis, in an easy way, demanding less calculation time and providing results compatible with those obtained through the NLDA., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Urban non-engineered buildings in Merida, Venezuela. Seismic performance and proposals for retrofit and for new construction

  • López Almansa, Francisco|||0000-0002-7359-110X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Castillo, A.
The seismic risk for an informal settlement in Mérida (“La Milagrosa”) is qualitatively assessed and retrofit strategies are proposed. The buildings in the settlement are thoroughly examined and four prototype buildings are chosen to represent the vast majority of houses in “La Milagrosa”. The structural behavior of these buildings under gravity loads and seismic actions is deeply analyzed; this study shows that the prototype buildings are unsafe for gravity loads, and that the seismic demands largely exceed their capacity. Based on these conclusions, feasible retrofit strategies are proposed, together with draft recommendations for new similar constructions. Earlier quantitative estimative appraisals show that the proposed seismic strengthening measures can be very effective in reducing fatalities and economical losses, and are significantly more cost-efficient than reconstruction-based approaches. These conclusions might be generalized to many non-engineered urban areas in earthquake-prone regions of the developing world., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Energy damage index based on capacity and response spectra

  • Díaz Alvarado, Sergio Alberto
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Hidalgo Leiva, D.A.
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: (1) the strain energy associated with the stiffness variation and the ductility of the structure, and (2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The first author holds PhD fellowships from the Universidad Juarez Autonoma de Tabasco (UJAT) and from the ‘Programa de Mejoramiento del Profesorado, Mexico (PROMEP)’., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

High-rise unreinforced masonry buildings: influence of the floor system on the global seismic response

  • Jiménez Pacheco, Juan
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
The studies about the effects of the flexibility of the floor diaphragm on the seismic behavior of unreinforced masonry buildings (URM-buildings) have focused on low-rise buildings. It should be borne in mind, however, that high-rise residential buildings have become the most mainstream housing pattern in European cities. Generally, the plan of this type of buildings is stretched and exhibits a high degree of symmetry. In this context, this paper summarizes a study whose primary objectives were: 1) develop a model for nonlinear static analysis of high-rise URM-buildings considering the flexibility of the floor system, and 2) analyze the influence of the stiffening of the floor system on the global seismic response of such buildings. To this aim, a six-story building with a composite floor of iron beams and brick vaults (IBBV-floor), typical of the Eixample-Barcelona district (prototype-building), was adopted as a case study. The floor system was modeled as aggregation of diaphragm macro-elements. All macro-elements, those that constitute the walls as well as the floor system, were developed with spring-elements. The construction of the model followed a strategy of modeling and validation by stages, from the 2D equivalent frame model until the integral model of the prototype-building. The analysis of the influence of the stiffening of the floor system was based on the application of conventional stiffening methods on the IBBV-floor. On the basis of a sensitivity analysis, the study focused on three cases: 1) unstiffened original variant, 2) a selected stiffened variant, and 3) variant with rigid floor. The global seismic response was evaluated in terms of characteristics of pushover curves and the displaced configuration of the floors. The stiffening of the floor system induces on the prototype-building slight increases in the fundamental periods, slight to moderate increases in the base shear capacities and significant decreases in the displacement capacities. Finally, these outcomes are discussed and located in the context of the most recent works., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Spring-type elements model for non-linear static analysis of masonry buildings

  • Jiménez Pacheco, Juan
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
The use of analytical models based on a relatively small number of mechanical and geometrical parameters is very useful to provide a preliminary evaluation of the expected seismic performance and determine whether a more refined approach is necessary. In this context, the aim of this work is to develop a simplified model for nonlinear static analysis of unreinforced brick masonry (URM) walls. The proposed model fits within the equivalent frame approach with one-dimensional members and poses an alternative assembly of macro-elements describing the behavior of piers and spandrels. Such macro-elements are composed by springs: two end springs controlling the flexural behavior and a central spring responding to shear forces. As far as the non-linear modeling is concerned, original force-displacement relationships (FDRs) were implemented in terms of multilinear curves, in order to incorporate recent advances in the knowledge of strength degradation of the URM members. The proposed model was implemented in the Ruaumoko code and its reliability was tested by means of pushover analyses performed on three walls that have been widely used as benchmarks. The obtained pushover curves were compared with those reported by several authors, showing a good agreement in terms of elastic stiffness, base shear capacity and displacement capacity. In addition, in relation to one of the walls, the precision in the capture of the ultimate damage was discussed. The model implemented by using the Ruaumoko code, resulted simple and effective, and it has still room for improvement, so that this work poses possibilities of refinement, from the identification and discussion of their limitations., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Real aperture radar: an interferometric technique to assess earthquake damaged structures

  • Cabrera Velez, Esteban
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Luzi, Guido
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
Ambient vibration testing has become a useful tool to assess the operational conditions of any existing structure, and allows the engineers to maintain a continuous monitoring in order to check its structural health conditions. In this paper an experimental survey performed by means of an original interferometric technique applied on a real building damaged after the Mw 5.1, may 11th 2011, Lorca earthquake (southeast Spain) is presented and discussed. This interferometric technique, based on real aperture radar (RAR), allows an easy, non-invasive and contactless procedure to evaluate the dynamic response of a building excited by ambient vibration noise. Contemporaneously, a 3D computational model of the monitored structure has been developed and an equivalent non-linear static analysis has been performed. The capacity spectrum method and a specific fragility model were used in order to obtain a global damage index of the structure. A specific post process of the RAR output combined with the numerical analysis of the modelled structure should help to establish the damage condition of the building in the aforementioned specific post-earthquake scenario, in order to estimate the occupancy conditions. The results of the computational assessment are consistent with the observed damage and with the results of the experimental RAR survey. The consistency of the results allows considering the interferometric RAR technique as an interesting alternative, or, in any case, a complementary non-invasive prospecting tool to assess the structural health conditions in a post-earthquake scenario., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Esteban Cabrera, sponsored by the University of Azuay (UDA), obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sensitivity analysis of seismic parameters in the Probabilistic Seismic Hazard Assessment (PSHA) for Barcelona applying the new R-CRISIS

  • Aguilar Meléndez, Armando
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Rodriguez Lozoya, H.E.
  • Monterrubio Velasco, Marisol|||0000-0003-0790-1832
  • Escalante Martínez, Jesús E.
  • Campos Ríos, Amelia
One of the most common ways to represent results of the probabilistic seismic hazard assessments (PSHA) are maps of seismic hazard, which usually show values of Peak Ground Acceleration (PGA) in a region for a return period. A common return period is of 475 years. These types of maps are frequently incorporated in seismic codes, which include the minimum requirements to design new buildings. On the other hand, a sensitivity analysis usually gives us additional information about a procedure or result. For instance, a sensitivity analysis about a PSHA can give us information about what variables considered to compute the seismic hazard have a significant influence on the results of seismic hazard. In the present study, we performed a sensitivity analysis related to the PSHA for Barcelona. This analysis was oriented to identify the influence in the results of seismic hazard of the following variables: a) the relationship magnitude-macroseismic intensity chosen to convert values of macroseismic intensity to magnitudes; b) the beta parameter that was used to define part of the seismicity of a seismic source and; c) the ground motion prediction equation (GMPE) which was used to determine intensities values to different distances from the epicenter of earthquakes. For this purpose, we applied the code R-CRISIS, which is the updated version of CRISIS2015. Therefore, the present study had as an additional objective to test the functionality of the new R-CRISIS from the point of view of users. According to the results of the sensitivity analysis of the PSHA of Barcelona both the GMPE and the relationship magnitude-macroseismic intensity are the two variables that have the greater influence on the results of seismic hazard of the present study. For instance, in some results of seismic hazard for the city of Barcelona the values of PGA (for the same return period) differ between them until 82% depending on if we considered the means values of the PGA values of the GMPE or the mean values plus one standard deviation of the PGA values of the GMPE. Finally, according to our experience in the use of the new R-CRISIS in the present study, we can confirm that it is both a powerful and user-friendly software. R-CRISIS has valuable features, for instance, it allows to consider diverse types of criteria to define the type of seismic source. For example, R-CRISIS allows defining different types of geometries of the seismic sources, and different criteria to define the seismicity of each seismic source. An important feature of R-CRISIS is the fact that it includes a database with numerous GMPE ready to be used to compute seismic hazard. Additionally, R-CRISIS has valuables graphical tools which are very helpful during the following two stages: the assigning data and the analysis of results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A probabilistic approach for seismic risk assessment based on vulnerability functions: application to Barcelona

  • Aguilar Meléndez, Armando
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Lantada, Nieves|||0000-0002-9974-6915
  • Rodriguez Lozoya, H.E.
The final publication is available at Springer via http://dx.doi.org/10.1007/s10518-018-0516-4, Risk assessment and management is an important step towards resilient and sustainable cities. Among many other perils, both natural and manmade, seismic risk is a major threat for resilience and sustainability. In recent decades, several methods for seismic risk assessment have been proposed, including the well-known Vulnerability Index Method (VIM). In this study, a probabilistic version of the VIM, which we call the Vulnerability Index Method-Probabilistic (VIM_P), is proposed. The VIM_P requires essential information on the seismic hazard and on the vulnerability of the building stock. Seismic hazard is determined using the exceedance rates of macroseismic intensities, as defined in the European Macroseismic Scale (EMS). Seismic vulnerability is defined by means of vulnerability probability density functions (pdf) that describe the probability distribution of the corresponding vulnerability index. Beta-like functions are used for these pdfs. VIM_P quantifies seismic vulnerability by means of three vulnerability curves, Lower, Best and Upper, according to the quantity and quality of available information, thus allowing three estimates of seismic vulnerability and risk. Then, seismic risk is computed via the convolution of seismic hazard and seismic vulnerability, considering semi-empirical damage functions. Seismic risk is given through the exceedance frequencies of the damage grades. To highlight the capabilities of the VIM_P, the seismic risk of about 70,000 residential buildings in Barcelona was assessed. According to the results, the exceedance frequency of the collapse damage state for more than the 50% of the buildings in the Eixample district would be greater than 1 × 10-5. This confirms the relatively high seismic risk in the city, mainly due to the high vulnerability of the built environment. Specific software, USERISK20015, has been developed for routine applications of VIM_P. It is hoped that VIM_P and this new tool for seismic risk assessment will be useful to stakeholders and civil protection authorities for risk management and prioritizing actions that can help to create more resilient, sustainable cities., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

New capacity and energy based damage index

  • Díaz, Sergio Alberto
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: 1) the strain energy associated with the stiffness variation and the ductility of the structure, and 2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Damage Index for structures with elements of high flexural stiffness and/or brittle behavior

  • Hidalgo Leiva, Diego Antonio
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Díaz, Sergio Alberto
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pinzón Ureña, Luis|||0000-0003-3128-7158
Structures with high lateral stiffness and/or with brittle to semi-brittle elements in their lateral resistant system may exhibit a rapid decrease of their shear capacity and a sudden loss of stiffness when lateral cyclic loads, as those produced by earthquakes, are applied. This behavior can be related to damage (partial or complete) of a particular structural element. In this article, the expected seismic damage is analyzed and assessed in two different structures. The first one is a low-rise reinforced masonry structure, with hollow concrete blocks (2 stories); the second one is a high-rise dual reinforced concrete building (18 stories). In both cases, materials are characterized using a proper hysteresis model, which takes into account softening and shear degradation. To quantify the structural damage, the well-known Park and Ang damage index is used. The damage curves shown in this paper, exhibit a quick damage increase for relatively low-intensity values, which is attributed to nonlinear incursions of several structural elements with low ultimate ductility. However, incremental dynamic analyses are time-consuming; therefore, it becomes important to develop simplified methods, also successfully representing this kind of effects. A recently proposed damage index, which can be computed in an easy and straightforward way from capacity curves or capacity spectra, is modified in this work to include this fast strength degradation. Details of the computations of this new damage index are also described here., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Geometric- and non-geometric mean sensor-orientation-independent seismic intensities: application to the Italian strong motion database

  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Hidalgo Leiva, Diego Antonio
In this paper, the directionality effects of the as recoded ground motions are investigated. The Italian accelerometric archive (ITACA) is used for this purpose. A number of 949 horizontal ground motion records (two components) are used. The following measures, resulting from different ways of combining the maximum values (m1,m2) of the two horizontal components were investigated: Geometric Mean (GMRot), projection (Rot) of the two as recorded components onto all non-redundant azimuths and larger (LRot) value [max(m1,m2)]. The sensor-orientation-independent quantities: GMRotDpp, RotDpp, GMRotIpp and LRotDpp have been obtained. In these quantities, pp means percentile and D and I, respectively, mean dependent and independent of the period. The 50th percentiles values of these intensity measures were compared to the GM of the as-recorded components obtaining differences of 1% for GMRotD50 and in the ranges 2-6%, 1-2% and 15-27% respectively for RotD50, GMRotI50 and LRotD50. The three first ratios show a good agreement with similar studies in other regions. Moreover, the vector combination of the two orthogonal time histories (Root of the Sum of Squares, RSS) presents equal values as RotD100 and LRotD100. The study has also been performed by using the maxima of the time histories combinations; the following quantities are thus investigated: mGMRotDpp and mGMRotIpp, where m indicates peak values of the combined time histories. Our results indicate that the ratios between the 50th percentile of these orientation independent intensities and the GM of the as-recorded components, are in the ranges 0.78-0.85 and 0.79-0.86, respectively, proving that former ones are conservative., This research has been partially funded by the government of Spain (Ministry of Economy and Competitiveness –MINECO, in its Spanish acronym) and by the European Regional Development Fund (FEDER, in its Spanish acronym) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913 -P (MINECO / FEDER, UE).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

GPR spectra for monitoring asphalt pavements

  • Pedret Rodés, Josep
  • Martínez Reguero, Adriana Haydée|||0000-0002-3709-0463
  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
Ground Penetrating Radar (GPR) is a prospecting method frequently used in monitoring asphalt pavements, especially as an optimal complement to the defection test that is commonly used for determining the structural condition of the pavements. Its application is supported by studies that demonstrate the existence of a relationship between the parameters determined in GPR data (usually travel time and wave amplitude) and the preservation conditions of the structure. However, the analysis of frequencies is rarely applied in pavement assessment. Nevertheless, spectral analysis is widespread in other fields such as medicine or dynamic analysis, being one the most common analytical methods in wave processing through use of the Fourier transform. Nevertheless, spectral analysis has not been thoroughly applied and evaluated in GPR surveys, specifically in the field of pavement structures. This work is focused on analyzing the behavior of the GPR data spectra as a consequence of different problems affecting the pavement. The study focuses on the determination of areas with failures in bituminous pavement structures. Results epitomize the sensitivity of frequencies to the materials and, in some cases, to the damage., This research has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The study is also a contribution to the EU Action COST TU1208 “Civil Engineering Applications of Ground Penetrating Radar” financed by the European Union., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

New capacity and energy based damage index

  • Díaz, Sergio Alberto
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Alva Bañuelos, Rodrigo Esteban
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: 1) the strain energy associated with the stiffness variation and the ductility of the structure, and 2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sensitivity analysis of seismic parameters in the Probabilistic Seismic Hazard Assessment (PSHA) for Barcelona applying the new R-CRISIS

  • Aguilar Meléndez, Armando
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Rodriguez Lozoya, H.E.
  • Monterrubio Velasco, Marisol
  • Escalante Martínez, Jesús E.
  • Campos Ríos, Amelia
One of the most common ways to represent results of the probabilistic seismic hazard assessments (PSHA) are maps of seismic hazard, which usually show values of Peak Ground Acceleration (PGA) in a region for a return period. A common return period is of 475 years. These types of maps are frequently incorporated in seismic codes, which include the minimum requirements to design new buildings. On the other hand, a sensitivity analysis usually gives us additional information about a procedure or result. For instance, a sensitivity analysis about a PSHA can give us information about what variables considered to compute the seismic hazard have a significant influence on the results of seismic hazard. In the present study, we performed a sensitivity analysis related to the PSHA for Barcelona. This analysis was oriented to identify the influence in the results of seismic hazard of the following variables: a) the relationship magnitude-macroseismic intensity chosen to convert values of macroseismic intensity to magnitudes; b) the beta parameter that was used to define part of the seismicity of a seismic source and; c) the ground motion prediction equation (GMPE) which was used to determine intensities values to different distances from the epicenter of earthquakes. For this purpose, we applied the code R-CRISIS, which is the updated version of CRISIS2015. Therefore, the present study had as an additional objective to test the functionality of the new R-CRISIS from the point of view of users. According to the results of the sensitivity analysis of the PSHA of Barcelona both the GMPE and the relationship magnitude-macroseismic intensity are the two variables that have the greater influence on the results of seismic hazard of the present study. For instance, in some results of seismic hazard for the city of Barcelona the values of PGA (for the same return period) differ between them until 82% depending on if we considered the means values of the PGA values of the GMPE or the mean values plus one standard deviation of the PGA values of the GMPE. Finally, according to our experience in the use of the new R-CRISIS in the present study, we can confirm that it is both a powerful and user-friendly software. R-CRISIS has valuable features, for instance, it allows to consider diverse types of criteria to define the type of seismic source. For example, R-CRISIS allows defining different types of geometries of the seismic sources, and different criteria to define the seismicity of each seismic source. An important feature of R-CRISIS is the fact that it includes a database with numerous GMPE ready to be used to compute seismic hazard. Additionally, R-CRISIS has valuables graphical tools which are very helpful during the following two stages: the assigning data and the analysis of results., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Urban non-engineered buildings in Merida, Venezuela. Seismic performance and proposals for retrofit and for new construction

  • López Almansa, Francisco
  • Pujades Beneit, Lluís
  • Castillo, A.
The seismic risk for an informal settlement in Mérida (“La Milagrosa”) is qualitatively assessed and retrofit strategies are proposed. The buildings in the settlement are thoroughly examined and four prototype buildings are chosen to represent the vast majority of houses in “La Milagrosa”. The structural behavior of these buildings under gravity loads and seismic actions is deeply analyzed; this study shows that the prototype buildings are unsafe for gravity loads, and that the seismic demands largely exceed their capacity. Based on these conclusions, feasible retrofit strategies are proposed, together with draft recommendations for new similar constructions. Earlier quantitative estimative appraisals show that the proposed seismic strengthening measures can be very effective in reducing fatalities and economical losses, and are significantly more cost-efficient than reconstruction-based approaches. These conclusions might be generalized to many non-engineered urban areas in earthquake-prone regions of the developing world., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

GPR spectra for monitoring asphalt pavements

  • Pedret Rodés, Josep
  • Martínez Reguero, Adriana Haydée
  • Pérez Gracia, María de la Vega
Ground Penetrating Radar (GPR) is a prospecting method frequently used in monitoring asphalt pavements, especially as an optimal complement to the defection test that is commonly used for determining the structural condition of the pavements. Its application is supported by studies that demonstrate the existence of a relationship between the parameters determined in GPR data (usually travel time and wave amplitude) and the preservation conditions of the structure. However, the analysis of frequencies is rarely applied in pavement assessment. Nevertheless, spectral analysis is widespread in other fields such as medicine or dynamic analysis, being one the most common analytical methods in wave processing through use of the Fourier transform. Nevertheless, spectral analysis has not been thoroughly applied and evaluated in GPR surveys, specifically in the field of pavement structures. This work is focused on analyzing the behavior of the GPR data spectra as a consequence of different problems affecting the pavement. The study focuses on the determination of areas with failures in bituminous pavement structures. Results epitomize the sensitivity of frequencies to the materials and, in some cases, to the damage., This research has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The study is also a contribution to the EU Action COST TU1208 “Civil Engineering Applications of Ground Penetrating Radar” financed by the European Union., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Damage Index for structures with elements of high flexural stiffness and/or brittle behavior

  • Hidalgo Leiva, Diego Antonio
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Díaz, Sergio Alberto
  • Vargas Alzate, Yeudy Felipe
  • Pinzón Ureña, Luis
Structures with high lateral stiffness and/or with brittle to semi-brittle elements in their lateral resistant system may exhibit a rapid decrease of their shear capacity and a sudden loss of stiffness when lateral cyclic loads, as those produced by earthquakes, are applied. This behavior can be related to damage (partial or complete) of a particular structural element. In this article, the expected seismic damage is analyzed and assessed in two different structures. The first one is a low-rise reinforced masonry structure, with hollow concrete blocks (2 stories); the second one is a high-rise dual reinforced concrete building (18 stories). In both cases, materials are characterized using a proper hysteresis model, which takes into account softening and shear degradation. To quantify the structural damage, the well-known Park and Ang damage index is used. The damage curves shown in this paper, exhibit a quick damage increase for relatively low-intensity values, which is attributed to nonlinear incursions of several structural elements with low ultimate ductility. However, incremental dynamic analyses are time-consuming; therefore, it becomes important to develop simplified methods, also successfully representing this kind of effects. A recently proposed damage index, which can be computed in an easy and straightforward way from capacity curves or capacity spectra, is modified in this work to include this fast strength degradation. Details of the computations of this new damage index are also described here., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Spring-type elements model for non-linear static analysis of masonry buildings

  • Jiménez Pacheco, Juan
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
The use of analytical models based on a relatively small number of mechanical and geometrical parameters is very useful to provide a preliminary evaluation of the expected seismic performance and determine whether a more refined approach is necessary. In this context, the aim of this work is to develop a simplified model for nonlinear static analysis of unreinforced brick masonry (URM) walls. The proposed model fits within the equivalent frame approach with one-dimensional members and poses an alternative assembly of macro-elements describing the behavior of piers and spandrels. Such macro-elements are composed by springs: two end springs controlling the flexural behavior and a central spring responding to shear forces. As far as the non-linear modeling is concerned, original force-displacement relationships (FDRs) were implemented in terms of multilinear curves, in order to incorporate recent advances in the knowledge of strength degradation of the URM members. The proposed model was implemented in the Ruaumoko code and its reliability was tested by means of pushover analyses performed on three walls that have been widely used as benchmarks. The obtained pushover curves were compared with those reported by several authors, showing a good agreement in terms of elastic stiffness, base shear capacity and displacement capacity. In addition, in relation to one of the walls, the precision in the capture of the ultimate damage was discussed. The model implemented by using the Ruaumoko code, resulted simple and effective, and it has still room for improvement, so that this work poses possibilities of refinement, from the identification and discussion of their limitations., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An efficient methodology to estimate probabilistic seismic damage curves

  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Hurtado Gómez, Jorge Eduardo
The incremental dynamic analysis (IDA) is a powerful methodology that can be easily extended for calculating probabilistic seismic damage curves. These curves are metadata to assess the seismic risk of structures. Although this methodology requires a relevant computational effort, it should be the reference to correctly estimate the seismic risk of structures. Nevertheless, it would be of high practical interest to have a simpler methodology, based for instance on the pushover analysis (PA), to obtain similar results to those based on IDA. In this article, PA is used to obtain probabilistic seismic damage curves from the stiffness degradation and the energy of the nonlinear part of the capacity curve. A fully probabilistic methodology is tackled by means of Monte Carlo simulations with the purpose of establishing that the results based on the simplified proposed approach are compatible with those obtained with the IDA. Comparisons between the results of both approaches are included for a low- to midrise reinforced concrete building. The proposed methodology significantly reduces the computational effort when calculating probabilistic seismic damage curves., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Real aperture radar: an interferometric technique to assess earthquake damaged structures

  • Cabrera Velez, Esteban
  • González Drigo, José Ramón
  • Luzi, Guido
  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
Ambient vibration testing has become a useful tool to assess the operational conditions of any existing structure, and allows the engineers to maintain a continuous monitoring in order to check its structural health conditions. In this paper an experimental survey performed by means of an original interferometric technique applied on a real building damaged after the Mw 5.1, may 11th 2011, Lorca earthquake (southeast Spain) is presented and discussed. This interferometric technique, based on real aperture radar (RAR), allows an easy, non-invasive and contactless procedure to evaluate the dynamic response of a building excited by ambient vibration noise. Contemporaneously, a 3D computational model of the monitored structure has been developed and an equivalent non-linear static analysis has been performed. The capacity spectrum method and a specific fragility model were used in order to obtain a global damage index of the structure. A specific post process of the RAR output combined with the numerical analysis of the modelled structure should help to establish the damage condition of the building in the aforementioned specific post-earthquake scenario, in order to estimate the occupancy conditions. The results of the computational assessment are consistent with the observed damage and with the results of the experimental RAR survey. The consistency of the results allows considering the interferometric RAR technique as an interesting alternative, or, in any case, a complementary non-invasive prospecting tool to assess the structural health conditions in a post-earthquake scenario., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Esteban Cabrera, sponsored by the University of Azuay (UDA), obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An alternative approach to consider the effect of seismic directionality, Un enfoque alternativo para tomar en cuenta el efecto de la direccionalidad sísmica

  • Díaz Carrasco, Sergio
  • Pinzón, Luis A.
  • Pujades Beneit, Lluís
  • Vargas Alzate, Yeudy Felipe
Recent researches have proven the importance of considering the seismic directionality effect. The performance of buildings subjected to earthquakes depends on its orientation respect to the seismic actions applied. This type of calculation is computed using the nonlinear dynamic analysis (NLDA) and rotating the acceleration horizontal components onto all non-redundant angles, which entails a high computational cost. This paper presents an alternative approach to consider the directionality effect. The method is based on the nonlinear static analysis (NLSA) and on the energy balance between the capacity curves and the response spectra of the rotated seismic actions. This approach was applied to a 4-story steel frame building 3D-model with ground motions records from Mexico City. A high variability in the building performance is observed due to the incidence angle of the seismic action; the proposed method would allow considering this variation in the structural analysis, in an easy way, demanding less calculation time and providing results compatible with those obtained through the NLDA., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A probabilistic approach for seismic risk assessment based on vulnerability functions: application to Barcelona

  • Aguilar Meléndez, Armando
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Lantada, Nieves
  • Rodriguez Lozoya, H.E.
The final publication is available at Springer via http://dx.doi.org/10.1007/s10518-018-0516-4, Risk assessment and management is an important step towards resilient and sustainable cities. Among many other perils, both natural and manmade, seismic risk is a major threat for resilience and sustainability. In recent decades, several methods for seismic risk assessment have been proposed, including the well-known Vulnerability Index Method (VIM). In this study, a probabilistic version of the VIM, which we call the Vulnerability Index Method-Probabilistic (VIM_P), is proposed. The VIM_P requires essential information on the seismic hazard and on the vulnerability of the building stock. Seismic hazard is determined using the exceedance rates of macroseismic intensities, as defined in the European Macroseismic Scale (EMS). Seismic vulnerability is defined by means of vulnerability probability density functions (pdf) that describe the probability distribution of the corresponding vulnerability index. Beta-like functions are used for these pdfs. VIM_P quantifies seismic vulnerability by means of three vulnerability curves, Lower, Best and Upper, according to the quantity and quality of available information, thus allowing three estimates of seismic vulnerability and risk. Then, seismic risk is computed via the convolution of seismic hazard and seismic vulnerability, considering semi-empirical damage functions. Seismic risk is given through the exceedance frequencies of the damage grades. To highlight the capabilities of the VIM_P, the seismic risk of about 70,000 residential buildings in Barcelona was assessed. According to the results, the exceedance frequency of the collapse damage state for more than the 50% of the buildings in the Eixample district would be greater than 1 × 10-5. This confirms the relatively high seismic risk in the city, mainly due to the high vulnerability of the built environment. Specific software, USERISK20015, has been developed for routine applications of VIM_P. It is hoped that VIM_P and this new tool for seismic risk assessment will be useful to stakeholders and civil protection authorities for risk management and prioritizing actions that can help to create more resilient, sustainable cities., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Energy damage index based on capacity and response spectra

  • Díaz Alvarado, Sergio Alberto
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Vargas Alzate, Yeudy Felipe
  • Hidalgo Leiva, D.A.
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: (1) the strain energy associated with the stiffness variation and the ductility of the structure, and (2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The first author holds PhD fellowships from the Universidad Juarez Autonoma de Tabasco (UJAT) and from the ‘Programa de Mejoramiento del Profesorado, Mexico (PROMEP)’., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

High-rise unreinforced masonry buildings: influence of the floor system on the global seismic response

  • Jiménez Pacheco, Juan
  • González Drigo, José Ramón
  • Barbat Barbat, Horia Alejandro
  • Pujades Beneit, Lluís
The studies about the effects of the flexibility of the floor diaphragm on the seismic behavior of unreinforced masonry buildings (URM-buildings) have focused on low-rise buildings. It should be borne in mind, however, that high-rise residential buildings have become the most mainstream housing pattern in European cities. Generally, the plan of this type of buildings is stretched and exhibits a high degree of symmetry. In this context, this paper summarizes a study whose primary objectives were: 1) develop a model for nonlinear static analysis of high-rise URM-buildings considering the flexibility of the floor system, and 2) analyze the influence of the stiffening of the floor system on the global seismic response of such buildings. To this aim, a six-story building with a composite floor of iron beams and brick vaults (IBBV-floor), typical of the Eixample-Barcelona district (prototype-building), was adopted as a case study. The floor system was modeled as aggregation of diaphragm macro-elements. All macro-elements, those that constitute the walls as well as the floor system, were developed with spring-elements. The construction of the model followed a strategy of modeling and validation by stages, from the 2D equivalent frame model until the integral model of the prototype-building. The analysis of the influence of the stiffening of the floor system was based on the application of conventional stiffening methods on the IBBV-floor. On the basis of a sensitivity analysis, the study focused on three cases: 1) unstiffened original variant, 2) a selected stiffened variant, and 3) variant with rigid floor. The global seismic response was evaluated in terms of characteristics of pushover curves and the displaced configuration of the floors. The stiffening of the floor system induces on the prototype-building slight increases in the fundamental periods, slight to moderate increases in the base shear capacities and significant decreases in the displacement capacities. Finally, these outcomes are discussed and located in the context of the most recent works., This research has been partially funded by the Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad-MINECO) of the Spanish Government and by the European Regional Development Fund (Fondo Europeo de Desarrollo Regional-FEDER) of the European Union (UE) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). Mr. Juan Jiménez Pacheco, sponsored by the University of Cuenca, obtained a scholarship from the Ministry of Higher Education, Science and Technology, SENESCYT, Government of Ecuador, for doctoral studies in the Earthquake Engineering program of the UPC-Barcelona Tech., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Geometric- and non-geometric mean sensor-orientation-independent seismic intensities: application to the Italian strong motion database

  • Pinzón Ureña, Luis
  • Pujades Beneit, Lluís
  • Hidalgo Leiva, Diego Antonio
In this paper, the directionality effects of the as recoded ground motions are investigated. The Italian accelerometric archive (ITACA) is used for this purpose. A number of 949 horizontal ground motion records (two components) are used. The following measures, resulting from different ways of combining the maximum values (m1,m2) of the two horizontal components were investigated: Geometric Mean (GMRot), projection (Rot) of the two as recorded components onto all non-redundant azimuths and larger (LRot) value [max(m1,m2)]. The sensor-orientation-independent quantities: GMRotDpp, RotDpp, GMRotIpp and LRotDpp have been obtained. In these quantities, pp means percentile and D and I, respectively, mean dependent and independent of the period. The 50th percentiles values of these intensity measures were compared to the GM of the as-recorded components obtaining differences of 1% for GMRotD50 and in the ranges 2-6%, 1-2% and 15-27% respectively for RotD50, GMRotI50 and LRotD50. The three first ratios show a good agreement with similar studies in other regions. Moreover, the vector combination of the two orthogonal time histories (Root of the Sum of Squares, RSS) presents equal values as RotD100 and LRotD100. The study has also been performed by using the maxima of the time histories combinations; the following quantities are thus investigated: mGMRotDpp and mGMRotIpp, where m indicates peak values of the combined time histories. Our results indicate that the ratios between the 50th percentile of these orientation independent intensities and the GM of the as-recorded components, are in the ranges 0.78-0.85 and 0.79-0.86, respectively, proving that former ones are conservative., This research has been partially funded by the government of Spain (Ministry of Economy and Competitiveness –MINECO, in its Spanish acronym) and by the European Regional Development Fund (FEDER, in its Spanish acronym) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913 -P (MINECO / FEDER, UE)., Postprint (published version)