Pasar al contenido principal

SIMULACION AVANZADA PARA OPTIMIZAR EL RECONOCIMIENTO GEOTECNICO SUBMARINO

BIA2014-59467-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Linking shape and rotation of grains during triaxial compression of sand

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Andò, Edward
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Viggiani, Gioacchino
The final publication is available at Springer via http://dx.doi.org/10.1007/s10035-020-01058-2, Particle shape has a strong effect on the mechanical response of coarse soils. This has been usually observed examining specimen-scale or engineering-scale responses, which are the sum of many microscale interactions. In this work we observe the effects of particle shape directly at the microscale level. X-ray tomography (µ-CT) of two sand specimens is exploited to measure three-dimensional particle shape descriptors but also to track individual particle motions during triaxial compression. A discrete digital volume correlation algorithm is employed to track the motion of individual grains (around 50,000 for each sand specimen) during the test and measure, with good precision, their cumulated displacements and rotations. The specimens examined failed in a clearly localised shear mode. Advantage is taken of this to obtain data relevant for very different kinematical regimes: one uniform and more constrained and the other close to critical state. A direct comparison between the shape and kinematic databases shows to what degree particle shape descriptors are related to observed kinematics. It appears that true sphericity is a good predictor of upper bound rotational restraint., The work here described has been supported by the Spanish Ministry of Economy through Grants BIA2014-59467-R and BIA2017-84752-R. Laboratoire 3SR is part of the LabEx Tec21 (Investissements d’Avenir - Grant Agreement nANR-11-LABX-0030)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Low-order stabilized finite element for the full Biot formulation in soil mechanics at finite strain

  • Monforte Vila, Lluís
  • Navas, Pedro
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
This article presents a novel finite element formulation for the Biot equation using low-order elements. Additionally, an extra degree of freedom is introduced to treat the volumetric locking steaming from the effective response of the medium; its balance equation is also stabilized. The accuracy of the proposed formulation is demonstrated by means of numerical analyses., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An alternative approach to consider the effect of seismic directionality, Un enfoque alternativo para tomar en cuenta el efecto de la direccionalidad sísmica

  • Díaz Carrasco, Sergio
  • Pinzón, Luis A.
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
Recent researches have proven the importance of considering the seismic directionality effect. The performance of buildings subjected to earthquakes depends on its orientation respect to the seismic actions applied. This type of calculation is computed using the nonlinear dynamic analysis (NLDA) and rotating the acceleration horizontal components onto all non-redundant angles, which entails a high computational cost. This paper presents an alternative approach to consider the directionality effect. The method is based on the nonlinear static analysis (NLSA) and on the energy balance between the capacity curves and the response spectra of the rotated seismic actions. This approach was applied to a 4-story steel frame building 3D-model with ground motions records from Mexico City. A high variability in the building performance is observed due to the incidence angle of the seismic action; the proposed method would allow considering this variation in the structural analysis, in an easy way, demanding less calculation time and providing results compatible with those obtained through the NLDA., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

SDMT-based numerical analyses of deep excavation in soft soil

  • Mariano, Alessandra di|||0000-0001-7334-4486
  • Amoroso, Sara
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Monaco, Paola
  • Gens Solé, Antonio|||0000-0001-7588-7054
The paper explores the application of conventional (DMT) and seismic (SDMT) dilatometer tests to an important case of deep excavation design. The work presents finite-element analyses simulating a deep excavation close to Barcelona (Spain). A thick layer of soft interbedded sandy and silty soils made characterization based on laboratory testing very difficult. SDMT offered an alternative for estimating the soil stiffness and its stress-strain dependency. Numerical results and high-quality monitoring data show quite close agreement for most phases of the construction process, supporting the use of seismic dilatometer tests in numerical analyses of deep excavations. The paper also indicates the importance of incorporating stiffness data at low strains. FE analyses involved some uncertainties derived from the presence of jet-grouting soil treatments. On this point, a parametric study illustrates the effects of different modeling approaches., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Three-dimensional analysis of penetration problems using G-PFEM

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
Numerical simulation of large displacement problems in geomechanics has attracted the interest of many researchers over the past decades. In many circumstances these problems can be treated as two dimensional: plane stress or axisymmetric. However, some problems -such as the penetration of a square foundation or the DMT- do not enjoy any of these conditions. This contribution presents the extension to three dimensions of a numerical code for the simulation of large displacement fluid-saturated porous media at large strains. The proposal relies, on one hand, on the Particle Finite Element Method, known for its capability to tackle large deformations and rapid changing boundaries, and, on the other hand, on constitutive descriptions well established in current geotechnical analyses. The performance of the method is assessed in several benchmark examples, ranging from the insertion of a rigid square footing to a rough ball penetrometer.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Grading evolution and critical state in a discrete numerical model of Fontainebleau sand

  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • O'Sullivan, Catherine
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Liu, T.
Granular materials reach critical states upon shearing. The position and shape of a critical state line (CSL) in the compression plane are important for constitutive models, interpretation of in situ tests and liquefaction analyses. It is not fully clear how grain crushing may affect the identification and uniqueness of the CSL in granular soils. Discrete-element simulations are used here to establish the relation between breakage-induced grading evolution and the CSL position in the compression plane. An efficient model of particle breakage is applied to perform a large number of tests, in which grading evolution is continuously tracked using a grading index. Using both previous and new experimental results, the discrete-element model is calibrated and validated to represent Fontainebleau sand, a quartz sand. The results obtained show that, when breakage is present, the inclusion of a grading index in the description of critical states is advantageous. This can be simply done using the critical state plane (CSP) concept. A CSP is obtained for Fontainebleau sand., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sphericity measures of sand grains

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Andò, Edward
  • Gens Solé, Antonio|||0000-0001-7588-7054
The sphericity of a grain should measure the similitude of its shape with that of a sphere. Sphericity is a shape descriptor of long-standing interest for sedimentology. Now it has gained also interest to facilitate discrete element modelling of granular materials. True sphericity was initially defined by a surface ratio that requires three-dimensional (3D) grain surface measurement. That kind of measurement has been practically impossible until recently and, as a consequence, a number of alternative 3D measures and 2D proxies were proposed. In this work we present results from a study of grain shape based on x-ray tomography of two different sand specimens, containing more than 110.000 particles altogether. Sphericity measures were systematically obtained for all grains. 2D proxy measures were also obtained in samples of oriented and not-oriented grains. It is shown that the 2D proxy best correlated with true sphericity is perimeter sphericity, whereas the traditional Krumbein-Sloss chart proxy is poorly correlated. 2D measures acquired through minor axis projection are more closely related to 3D measures than those acquired using random projections., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Image-based calibration of rolling resistance in discrete element models of sand

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Andò, Edward
  • Viggiani, Gioacchino
Models that introduce rolling resistance at the contact are widely employed in simulations using the discrete element method (DEM) to indirectly represent particle shape effects. This approach offers substantial computational benefits at the price of increased calibration complexity. This work proposes a method to simplify calibration of rolling resistance. The key element is an empirical relation between a contact parameter (rolling friction) and a 3D grain shape descriptor (true sphericity). Values of true sphericity can be obtained by image analysis of the grains, either directly by 3D acquisition or by correlation with simpler-to-obtain 2D shape measures. Evaluation of rolling friction is thus made independent from that of other model parameters. As an extra benefit, the variability of grain shape in natural sands can be directly mapped into the discrete model. A mapping between rolling friction and true sphericity is calibrated using specimen-scale and grain scale results from two triaxial compression tests on Hostun sand and Caicos ooids. The mapping is validated using different triaxial tests from the same sands and from other reference sands (Ottawa, Ticino). In the case of Ticino grain-shape acquisition is made in 2D, using an ordinary table scanner. The results obtained support this direct calibration procedure., The support of EU through 645665 - GEO-RAMP - MSCA-RISE and of the Ministry of Economy of Spain through research Grant BIA2014-59467-R is gratefully acknowledged. Laboratoire 3SR is part of the LabEx Tec 21 (Investissements d’Avenir - grant agreement n_ANR-11-LABX-0030)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Permeability estimates from CPTu: a numerical study

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Parolini, C.
Realistic numerical simulations of CPTu in soft soils are now becoming possible thanks to methods like the Particle Finite Element Method (PFEM). They may be used to systematically explore the traditional methods of CPTu interpretation, identify their limitations and propose alternatives. This paper discusses a series of tests simulation CPT installation and subsequent dissipation tests in soils represented by the Modified Cam Clay model. Simulation outputs obtained for different input permeabilities are examined to obtain direct estimates of permeability using different methods proposed in the literature; additionally, a method to estimate the hydraulic conductivity during the piezocone penetration is also used. These estimates are then compared with the known input permeability value to assess their reliability.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Permeability estimates from CPTu: a numerical study

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Parolini, C.
Realistic numerical simulations of CPTu in soft soils are now becoming possible thanks to methods like the Particle Finite Element Method (PFEM). They may be used to systematically explore the traditional methods of CPTu interpretation, identify their limitations and propose alternatives. This paper discusses a series of tests simulation CPT installation and subsequent dissipation tests in soils represented by the Modified Cam Clay model. Simulation outputs obtained for different input permeabilities are examined to obtain direct estimates of permeability using different methods proposed in the literature; additionally, a method to estimate the hydraulic conductivity during the piezocone penetration is also used. These estimates are then compared with the known input permeability value to assess their reliability., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

SDMT-based numerical analyses of deep excavation in soft soil

  • Mariano, Alessandra di
  • Amoroso, Sara
  • Arroyo Álvarez de Toledo, Marcos
  • Monaco, Paola
  • Gens Solé, Antonio
The paper explores the application of conventional (DMT) and seismic (SDMT) dilatometer tests to an important case of deep excavation design. The work presents finite-element analyses simulating a deep excavation close to Barcelona (Spain). A thick layer of soft interbedded sandy and silty soils made characterization based on laboratory testing very difficult. SDMT offered an alternative for estimating the soil stiffness and its stress-strain dependency. Numerical results and high-quality monitoring data show quite close agreement for most phases of the construction process, supporting the use of seismic dilatometer tests in numerical analyses of deep excavations. The paper also indicates the importance of incorporating stiffness data at low strains. FE analyses involved some uncertainties derived from the presence of jet-grouting soil treatments. On this point, a parametric study illustrates the effects of different modeling approaches., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Image-based calibration of rolling resistance in discrete element models of sand

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Andò, Edward
  • Viggiani, Gioacchino
Models that introduce rolling resistance at the contact are widely employed in simulations using the discrete element method (DEM) to indirectly represent particle shape effects. This approach offers substantial computational benefits at the price of increased calibration complexity. This work proposes a method to simplify calibration of rolling resistance. The key element is an empirical relation between a contact parameter (rolling friction) and a 3D grain shape descriptor (true sphericity). Values of true sphericity can be obtained by image analysis of the grains, either directly by 3D acquisition or by correlation with simpler-to-obtain 2D shape measures. Evaluation of rolling friction is thus made independent from that of other model parameters. As an extra benefit, the variability of grain shape in natural sands can be directly mapped into the discrete model. A mapping between rolling friction and true sphericity is calibrated using specimen-scale and grain scale results from two triaxial compression tests on Hostun sand and Caicos ooids. The mapping is validated using different triaxial tests from the same sands and from other reference sands (Ottawa, Ticino). In the case of Ticino grain-shape acquisition is made in 2D, using an ordinary table scanner. The results obtained support this direct calibration procedure., The support of EU through 645665 - GEO-RAMP - MSCA-RISE and of the Ministry of Economy of Spain through research Grant BIA2014-59467-R is gratefully acknowledged. Laboratoire 3SR is part of the LabEx Tec 21 (Investissements d’Avenir - grant agreement n_ANR-11-LABX-0030)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Linking shape and rotation of grains during triaxial compression of sand

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos
  • Andò, Edward
  • Gens Solé, Antonio
  • Viggiani, Gioacchino
The final publication is available at Springer via http://dx.doi.org/10.1007/s10035-020-01058-2, Particle shape has a strong effect on the mechanical response of coarse soils. This has been usually observed examining specimen-scale or engineering-scale responses, which are the sum of many microscale interactions. In this work we observe the effects of particle shape directly at the microscale level. X-ray tomography (µ-CT) of two sand specimens is exploited to measure three-dimensional particle shape descriptors but also to track individual particle motions during triaxial compression. A discrete digital volume correlation algorithm is employed to track the motion of individual grains (around 50,000 for each sand specimen) during the test and measure, with good precision, their cumulated displacements and rotations. The specimens examined failed in a clearly localised shear mode. Advantage is taken of this to obtain data relevant for very different kinematical regimes: one uniform and more constrained and the other close to critical state. A direct comparison between the shape and kinematic databases shows to what degree particle shape descriptors are related to observed kinematics. It appears that true sphericity is a good predictor of upper bound rotational restraint., The work here described has been supported by the Spanish Ministry of Economy through Grants BIA2014-59467-R and BIA2017-84752-R. Laboratoire 3SR is part of the LabEx Tec21 (Investissements d’Avenir - Grant Agreement nANR-11-LABX-0030)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An alternative approach to consider the effect of seismic directionality, Un enfoque alternativo para tomar en cuenta el efecto de la direccionalidad sísmica

  • Díaz Carrasco, Sergio
  • Pinzón, Luis A.
  • Pujades Beneit, Lluís
  • Vargas Alzate, Yeudy Felipe
Recent researches have proven the importance of considering the seismic directionality effect. The performance of buildings subjected to earthquakes depends on its orientation respect to the seismic actions applied. This type of calculation is computed using the nonlinear dynamic analysis (NLDA) and rotating the acceleration horizontal components onto all non-redundant angles, which entails a high computational cost. This paper presents an alternative approach to consider the directionality effect. The method is based on the nonlinear static analysis (NLSA) and on the energy balance between the capacity curves and the response spectra of the rotated seismic actions. This approach was applied to a 4-story steel frame building 3D-model with ground motions records from Mexico City. A high variability in the building performance is observed due to the incidence angle of the seismic action; the proposed method would allow considering this variation in the structural analysis, in an easy way, demanding less calculation time and providing results compatible with those obtained through the NLDA., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Grading evolution and critical state in a discrete numerical model of Fontainebleau sand

  • Ciantia, Matteo Oryem
  • Arroyo Álvarez de Toledo, Marcos
  • O'Sullivan, Catherine
  • Gens Solé, Antonio
  • Liu, T.
Granular materials reach critical states upon shearing. The position and shape of a critical state line (CSL) in the compression plane are important for constitutive models, interpretation of in situ tests and liquefaction analyses. It is not fully clear how grain crushing may affect the identification and uniqueness of the CSL in granular soils. Discrete-element simulations are used here to establish the relation between breakage-induced grading evolution and the CSL position in the compression plane. An efficient model of particle breakage is applied to perform a large number of tests, in which grading evolution is continuously tracked using a grading index. Using both previous and new experimental results, the discrete-element model is calibrated and validated to represent Fontainebleau sand, a quartz sand. The results obtained show that, when breakage is present, the inclusion of a grading index in the description of critical states is advantageous. This can be simply done using the critical state plane (CSP) concept. A CSP is obtained for Fontainebleau sand., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Three-dimensional analysis of penetration problems using G-PFEM

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Carbonell Puigbó, Josep Maria
Numerical simulation of large displacement problems in geomechanics has attracted the interest of many researchers over the past decades. In many circumstances these problems can be treated as two dimensional: plane stress or axisymmetric. However, some problems -such as the penetration of a square foundation or the DMT- do not enjoy any of these conditions. This contribution presents the extension to three dimensions of a numerical code for the simulation of large displacement fluid-saturated porous media at large strains. The proposal relies, on one hand, on the Particle Finite Element Method, known for its capability to tackle large deformations and rapid changing boundaries, and, on the other hand, on constitutive descriptions well established in current geotechnical analyses. The performance of the method is assessed in several benchmark examples, ranging from the insertion of a rigid square footing to a rough ball penetrometer., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sphericity measures of sand grains

  • Rorato, Riccardo
  • Arroyo Álvarez de Toledo, Marcos
  • Andò, Edward
  • Gens Solé, Antonio
The sphericity of a grain should measure the similitude of its shape with that of a sphere. Sphericity is a shape descriptor of long-standing interest for sedimentology. Now it has gained also interest to facilitate discrete element modelling of granular materials. True sphericity was initially defined by a surface ratio that requires three-dimensional (3D) grain surface measurement. That kind of measurement has been practically impossible until recently and, as a consequence, a number of alternative 3D measures and 2D proxies were proposed. In this work we present results from a study of grain shape based on x-ray tomography of two different sand specimens, containing more than 110.000 particles altogether. Sphericity measures were systematically obtained for all grains. 2D proxy measures were also obtained in samples of oriented and not-oriented grains. It is shown that the 2D proxy best correlated with true sphericity is perimeter sphericity, whereas the traditional Krumbein-Sloss chart proxy is poorly correlated. 2D measures acquired through minor axis projection are more closely related to 3D measures than those acquired using random projections., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Low-order stabilized finite element for the full Biot formulation in soil mechanics at finite strain

  • Monforte Vila, Lluís
  • Navas, Pedro
  • Carbonell Puigbó, Josep Maria
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
This article presents a novel finite element formulation for the Biot equation using low-order elements. Additionally, an extra degree of freedom is introduced to treat the volumetric locking steaming from the effective response of the medium; its balance equation is also stabilized. The accuracy of the proposed formulation is demonstrated by means of numerical analyses., Peer Reviewed, Postprint (author's final draft)